INFRASTRUCTURE

• LAND AREA : 5800 Sq. Ft.

• OFFICE BUILD UP AREA : 1200 Sq. Ft.

• MACHINE SHOP AREA : 850 Sq. Ft.

MAN POWERS

Sr. Engineer : 01

Jr. Engineer : 05

Assy. Coordinators : 03

INTRODUCTION

�Our company started as a service & machine reconditioning industry in 1996.

�By experience and gained knowledge, we are manufacturing special purpose machines and controls up to DCS / SCADA level.

�We have Electrical, Electronics & Mechanical experts to execute the project.

OFFICE & WORKS :

GAYATHRI TECHNOCRATS,

1/281, MOOKANDAPALLI,

HOSUR – 635 126,

TAMIL NADU.

Ph. No : 04344-650052, 279579.

Mobile : +91-9994496112 / 3 / 4 / 5 / 9944272112

E mail : gtech-hosur@hotmail.com ,

gtech-hosur@in.com

Web. : www.gayathritechnocrats.com

NATURE OF BUSSINESS

� Special Purpose Machines

� Industrial Automation

�Advanced Controls Retrofitting

�Old Machine Reconditioning

�Mfg. of Conventional electronic controls

�Periodic, preventive & breakdown Maintenance

TECHNICAL HANDLED

� PLC – MITSUBISHI ( FX ),ABB(40,50,500 SERIES), SIEMENS(S5 & S7), KEYENCE(KV SERIES), MUTSUSHITA(FPI & FX), PANASONIC(FP-X SERIES), OMRON, MODICON etc.,

� HMIs – ABB( PP114, CP502, CP503, CP511 & CP420), ESA

( VT60,VT150,VT180 ), PROFACE ( GP & LT SERIES ), PANASONIC( GT SERIES ), MESSUNG ( Sr & Ex SERIES ) etc.,

� SCADA – AFCON PCIM & ABB PROCESS PORTAL

� DRIVES – MITSUBISHI ( E700 ), ABB( ACS400 & ACS550), TELEMACANIQUE (ALTIVAR 28 & ALTIVAR 58), CONTROL TECHNIQUE, SIEMENS HITACHI, DELTA, PANASONIC etc.,

� SERVO – MITSUBISHI, PANASONIC, GE FANUC etc.,

� LAB VIEW with DAQ based Systems.

OUR CUSTOMERS.� INDIA NIPPON ELECTRICALS LTD.,

� ABB LTD.,

� TITAN INDUSTRIES LTD.,

� MANDO BRAKS INDIA LTD.,

� IGARASHI MOTORS LTD.,

� TVS CHERRY LTD.,

� HARITHA SEATINGS LTD.,

� PRIMUS GLOVES PVT LTD.,

� LUCAS TVS & OTHERS.,

� DELPHI TVS,

� SARATH TECHNOLOGIES,

� BTS CLOTHING PVT. LTD.,

� SUNDARAM CLYTON,

� HARITA RUBBER,

� ZF ELECTRONICS TVS PVT. LTD.,

� BANGALORE REFINERY,

� LAKSHMI ELCTRICAL CONTROL SYSTEMS LTD.,

� RACHEL ENGINEERING,

� SIGMA POWER & ENERGY ENGINEERS,

� SUDARSAN AUTO COMPONENTS PVT. LTD.,

Projects Done.

� IG-IU Testing Machines

� Digital CDI Testing Machines

� Low Power RR Testing Machines

� High Power RR Testing machines

� Fly wheel Magneto Testing Machine

� SCN ECU Testing Machine

� Endurance and Vehicle Simulation

� Auto Torquing Machine

� Adhesive applying Machine

� Drum Brake checking Machine

� Automatic Thread Checking Machine

� EOL Testing Machine for Micro Switches

� Automatic Head Lamp Adjuster Testing Machine

� PC based Contactor Test Bench

� Thermal overload Relay Test Bench

� H.V Relay Test Bench

� SCADA Based Contactor Test Bench

� NI Lab view Based Contactor Test Bench

� Assembly Line Conveyors & Automation

� Vacuum Forming Machines

� Capacitor Winding Machines

� Special Purpose Hydraulic Systems and Press

� Multi Spindle Drilling and Tapping Machines

� Surgical Gloves Checking Machine

� Single Piece Flow Washing Machine Controls

� PU/Epoxy Potting Machine Controls

� Powder Coating Machine Controls

� Automated potting Machine Controls

� Automated Carton Packing & Strapping Machine Controls

� ERCU Testing Unit & Many Retro Fittings…

� Semi Automatic Watch Case Pipe Fixing Machine

� Vibrator Controllers

� Arc spray unit with wet booth

� Indexed fan coil winding machine etc…

� Interface Cards

� Sensor Amp. Cards etc…

Projects preview

CONTACTOR TEST BENCH

THREAD CHECKING MACHINE

SWIVEL TESTER

TORQUING AND ADHEISIVE APPLYING MACHINE

DRUM BRAKE TESTING MACHINE

AHL TESTING MACHINE

DIGITAL CDI TESTING MACHINE

FUEL INJECTION PUMP ASSEMBLEY LINE

THIS IS PLC BASED FI SYSTEM ASSEMBLEY LINE WITH PARTS ASSY.

DETECTION SYSTEM & POKA-YOKE CONFIRMATION FOR SCREW

TORQUING.

BURNER MANAGEMENT SYSTEM CONTROL PANEL

THIS PANEL FOR GAS & OIL BURNER MANAGEMENT CONTROL

SYSTEM THRO’ PLC. THIS PANEL WILL GET COMMAND FROM

DCS AND BASED ON THAT CONTROL THE SYSTEM.

ROTOR COIL WINDING MACHINE.

THIS IS WIPER MOTOR ROTOR COIL WINDING M/C. USING

MITSUBISHI PLC WITH SERVO SYSTEM. FOR OPERATOR

INTERFACE PROVIDE PROFACE MAKE HMI.

FWM ENDURANCE CHECKING MACHINE.

THIS IS ENDURANCE CHECKING M/C. WITH VECHICLE ENGINE

CONDITION SIMULATION MECHANISM USING HIGH SPEED

SPINDLE CONTROL WITH SIEMENS SPINDLE MOTOR WITH

DRIVE. SPEED & TIME CAN CONTROL THRO’ ABB SCADA ON

THE PC.

TCI BURN-IN CHECKING MACHINE.

THIS M/C. FOR TESTING OF VECHICLE IGNITION SYSTEM

COMPONENTS USING PLC WITH CONTROLED TEMPERATURE

CONDITION.

R.C DETAILS

TIN No. : 33333361542

C.S.T No. : 673824 Dt.: 31-07-1996

AREA CODE : 175

C.E No. : AKZPK8485EXM001

PAN No. : AKZPK8485E

BANK DETAILS

BANK NAME : BANK OF BARODA

BRANCH : SSI BRANCH, HOSUR

RTGS CODE : BARB0SSIHOS

BRANCH CODE : SSIHOS

A/C NO : 25720200000029