Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Features: • Microprocessor based servo controlled temperature system.
• Set temperature, air temperature, baby skin temperature, timer and heating power all
displayed separately by LED.
• Control Mode: Air mode and baby skin mode.
• Humidity is adjustable continuously.
• Integral time for recording therapy time.
• Self-testing function, multiple audible and visual alarms
• Alarm functions: Power failure, over temperature, temperature deviation, temperature sensor failure, fan failure.
• A rust-free aluminum structure for durability.
• >37℃ temperature setting.
• Triple protection for over temperature with separate cut off device, for higher safety.
• Infant bed inclination angle is adjustable.
• Single wall hood, 4 operating windows and 2 iris ports, 5 infusion seals.
• Independent locking device for front door.
• Oxygen inlet, 1 tray.
• A keypad lock prevent inadvertent changes of setting.
• Trough for pulling and pushing, which is convenient for adding water and cleaning.
• Fan with low noise and long life-span.
• Temperature deviation and over temperature are adjustable from the front panel directly.
• Silence/reset button for alarms.
• Support bracket.
Standard configuration Main body (including the transparent hood, control system, infant bed, water trough), I.V. pole, mattress, drawers, castors, Oxygen inlet, tray.
Optional function:
LCD touch screen, Up/downside LED phototherapy unit, X-ray cassette tray & integrated scale, Electronic elevator, Double wall hood, Air&O2 blender.
Infant Incubator OMEGA 2000
LCD Touch Screen(optional) X-ray cassette tray & integrated
scale(optional) Electronic elevator(optional)
UP/Down LED phototherapy
units(optional) Double wall hood(optional) Air&O2 blender(optional)
Technical specification
Power supply AC110/220V 60/50Hz
Power input ≤650VA
Operating Conditions:
Environment temperature 20℃~ 30℃
Environment relative humidity 30% ~75%RH
Environment air velocity of flow <0.3m/s
Air Temperature control range 25℃~ 38℃
Skin Temperature control range 32℃~ 38℃
Skin Temperature sensor accuracy +0.3℃
Temperature fluctuation +0.5℃
Uniformity of mattress temperature ≤0.8℃
Warm-up time(from 25℃) ≤30min
Internal noise level ≤50dB
Infant bed tilt angle +10º
Mattress size 65cm(L) × 37cm(W)
Trough capacity 1200ml
Air filter 0.5um
Transport and storage
Package:
Each unit comes in 2 plywood crates: Control unit and cabinet: 112x66x98cm Weight: Net: 80Kg, Gross: 110Kg Hood: 98x63x74cm Weight: Net: 15Kg, Gross: 30Kg
Environment Temp -10℃~+70℃
Environment Relative Humidity ≤80% RH
Atmospheric Pressure 500 ~1060Kpa
Smart Medical Technology
Specifications are subject to change without notice.
ISO 13485 ISO 9001 1234
Andromeda, LLC, 12472 Lake Underhill Rd. #135, Orlando, FL 32828, USA Tel: 1- 407-574-5561 Email: [email protected] www.andromedausa.com