NOTE: Please read and fully understand the instructions in this manual before operating the pneumatic tool. Carefully read through this OPERATOR’S MANUAL to ensure efficient, safe operation. It is recommended that the MANUAL be kept readily available as an important reference when using this tool.

!

Operator’s Manual

Fine Wire Staplers

S5016AL Item No. 64260

20 Gauge 1/2" Crown Stapler

3/16" - 5/8" (5mm - 16mm)

S7116AL Item No. 64270

22 Gauge 3/8" Crown Stapler

3/16" - 5/8" (5mm - 16mm)

SA1116AL Item No. 64280

20 Gauge 3/8" Crown Stapler

3/16" - 5/8" (5mm - 16mm)

S7116 Item No. 64275

22 Gauge 3/8" Crown Stapler

3/16" - 5/8" (5mm - 16mm)

2 Interchange Brands, LLC

Safety Instructions

3Interchange Brands, LLC

Safety Instructions

4 Interchange Brands, LLC

Compressed Air System

5Interchange Brands, LLC

Maintenance and Inspection

6 Interchange Brands, LLC

Tool Operation

TOOL SPECIFICATIONS

MODEL NUMBER S5016AL S7116AL SA1116ALDimensions 15"L x 5.5"H x 1.5" W

38cm x 14cm x 3.8cm15"L x 5.5"H x 1.5" W38cm x 14cm x 3.8cm

15"L x 5.5"H x 1.5" W38cm x 14cm x 3.8cm

Weight 2.55 lbs. / 1.2 kgs. 2.55 lbs. / 1.2 kgs. 2.55 lbs. / 1.2 kgs.

Operating Pressure 70 - 100psi / 5 - 7 kgs. 70 - 100psi / 5 - 7 kgs. 70 - 100psi / 5 - 7 kgs.

Magazine Capacity 220 staples 400 staples 220 staples

Fastener Type 20 ga. 1/2" Crown / 12.7mm 22 ga. 3/8" Crown / 9.5mm 20 ga. 3/8" Crown / 9.5mm

Fastener Length 3/16" - 5/8" / 5mm - 16mm 3/16" - 5/8" / 5mm - 16mm 3/16" - 5/8" / 5mm - 16mm

MODEL NUMBER S7116Dimensions 8.5"L x 5.5"H x 1.5" W

21.6cm x 14cm x 3.8cm

Weight 2.0 lbs. / 0.9 kgs.

Operating Pressure 70 - 100psi / 5 - 7 kgs.

Magazine Capacity 150 staples

Fastener Type 22 ga. 3/8" Crown / 9.5mm

Fastener Length 3/16" - 5/8" / 5mm - 16mm

APPLICATIONS

Upholstering, carpet laying, light wood assembly, display and sign work, luggage construction, silk screen assembly, home building applications, applying drapery fabric to cornices, sign shops, box spring and mattress covers, automobile interior, installation of light trim moldings, light gauge metal piercing and roofing paper.

7Interchange Brands, LLC

Tool Operation

(Auto Fire is not available on all models.)

(Auto Fire is not available on all models.)

(Auto Fire is not available on all models.)

8 Interchange Brands, LLC

Troubleshooting

9Interchange Brands, LLC

PARTS KITS FOR S5016ALORDER NO.

DESC. CODE

KIT # ITEM

98120 S16K1 Kit #1 O-Ring/Gasket/Bumper Kit for all S5016, S7116 and SA1116 Staplers98122 S5016K2 Kit #2 Piston/Driver Assembly/Bumper Kit for S5016, S5016A and S5016AL Staplers98128 S16AK4 Kit #4 Trigger Valve Assembly Kit for S5016A, S7116A and SA1116A Auto-Fire Staplers98130 S5016ALK8 Kit #8 Feeder Kit for S5016AL Stapler

WARNING! ■ Always follow the tool manufacturer’s safety and maintenance instructions.

■ Always wear safety glasses with side shields when operating or servicing tools.

■ Always disconnect the air supply from the tool and empty the magazine when servicing tools.

!

PARTS KITS FOR S7116ALORDER NO.

DESC. CODE

KIT # ITEM

98120 S16K1 Kit #1 O-Ring/Gasket/Bumper Kit for all S5016, S7116 and SA1116 Staplers98124 S7116K2 Kit #2 Piston/Driver Assembly/Bumper Kit for S7116, S7116A and S7116AL Staplers 98128 S16AK4 Kit #4 Trigger Valve Assembly Kit for S5016A, S7116A and SA1116A Auto-Fire Staplers98132 S7116ALK8 Kit #8 Feeder Kit for S7116AL Stapler

PARTS KITS FOR SA1116ALORDER NO.

DESC. CODE

KIT # ITEM

98120 S16K1 Kit #1 O-Ring/Gasket/Bumper Kit for all S5016, S7116 and SA1116 Staplers98126 SA1116K2 Kit #2 Piston/Driver Assembly/Bumper Kit for SA1116, SA1116A and SA1116AL Staplers

98128 S16AK4 Kit #4 Trigger Valve Assembly Kit for S5016A, S7116A and SA1116A Auto-Fire Staplers98134 SA1116ALK8 Kit #8 Feeder Kit for SA1116AL Stapler

Parts Kits

PARTS KITS FOR S7116ORDER NO.

DESC. CODE

KIT # ITEM

98120 S16K1 Kit #1 O-Ring/Gasket/Bumper Kit for all S5016, S7116 and SA1116 Staplers98124 S7116K2 Kit #2 Piston/Driver Assembly/Bumper Kit for S7116, S7116A and S7116AL Staplers 98121 S16K4 Kit #4 Trigger Valve Assembly Kit for S5016, S7116 and SA1116 Staplers98135 S7116K8 Kit #8 Feeder Kit for S7116 Stapler

10 Interchange Brands, LLC

NO. CODE Description Qty NO. CODE Description Qty1 18012 Cap 1 27 18200 Rear Magazine Bumper 12 90036 O-Ring 1 28 93001 Hex. Soc. FT HD Screw 33 90001 O-Ring 1 29 98006 Buttom. HD. Soc. Screw 24 15020-1 Piston Ram Assembly (S5016AL) 1 30 18212 Magazine Retainer 14 17023-1 Piston Ram Assembly (S7116AL) 1 31 18410 Step Pin 14 11020-1 Piston Ram Assembly (A1116AL) 1 32 18230 Trigger 15 90034 O-Ring 1 33 18240 Seal 16 18041 Cylinder 1 34 18487-1 Body (Auto Series) 17 18050 Bumper 1 35 18271 Magazine Latch Spring 18 18060-1 Trigger Valve Set 1 36 18281 Magazine Latch 19 18070 Trigger Valve Spring 1 37 94001-1 Air Plug 110 90055 O-Ring 1 38 18291 Pin 111 18090 Trigger Valve 1 39 95001 E-Ring 112 90006 O-Ring 1 42 18310-1 Trigger Valve Plate (Auto Series Only) 113 90008 O-Ring 1 43 90005 O-Ring 114 90009 O-Ring 1 44 90033 O-Ring 115 18110 Trigger Valve Stem 1 45 90033 O-Ring 116 18130 Trigger Valve Guide 1 51 90015 O-Ring 117 90007 O-Ring 1 52 18340 Latch Bracket 118 91013-1 Hex. HD Soc Screw + Spring Washer 2 53 18330 Nose Cover 120 91001 Hex. HD Soc Screw 2 54 96002 Split Pin 121 15140 Nose (S5016AL) 1 55 96001 Split Pin 121 17141 Nose (S7116AL) 1 56 90035 O-Ring 121 11140 Nose (SA1116AL) 1 57 18360 End Cap 122 15151 Nose Plate (S7116 AL) 1 58 97003 Nut 222 15150 Nose Plate (S5016 AL& SA1116AL) 1 59 18350-1 Trigger Valve A Kit 123 17161 Magazine Cover (S7116 AL) 1 64 18390 Double Trigger Latch Spring 123 15161 Magazine Cover (S5016 AL) 1 65 28100 Double Trigger 123 11161 Magazine Cover (SA1116AL) 1 66 18370 Pin 124 18171 Pusher Spring 1 67 95002 C-Ring 225 15181 Magazine (S5016 AL) 1 68 18322-1 Automatic Adjust Såwitch Kit 125 17181 Magazine (S7116 AL) 1 74 18323 Switch Cover 125 11181 Magazine (SA1116AL) 1 75 98012 Round Head Screw 126 15190 Pusher (S5016AL) 126 17191 Pusher (S7116AL) 126 11190 Pusher (SA1116AL) 1

Parts List for S5016AL, S7116AL and SA1116AL

NOTICE: The parts listed in this manual are for service assembly and for reference. Changes to the tool and drawing may be made without notification.

Most parts or parts kits are available. Contact your local dealer for more information.

WARNING: When the tool needs repairing or servicing, it is strongly recommended that you contact your local dealer. Do not disassemble the tool yourself, which might waive your right for product guarantee.

S5016AL, S7116AL, SA1116AL Parts List (06-06-14)

11Interchange Brands, LLC

S5016AL, S7116AL, SA1116AL Parts Drawing (06-06-14)

Parts Drawing and Schematics for S5016AL, S7116AL and SA1116AL

12 Interchange Brands, LLC

Parts List for S7116

NO. CODE Description Qty NO. CODE Description Qty1 18012 Cap 1 27 18200 Rear Magazine Bumper 12 90036 O-Ring 1 28 93001 Hex. Soc. FT HD Screw 13 90001 O-Ring 1 29 98006 Buttom HD Soc Screw 24 17023-1 Piston Ram Assembly 1 30 18212 Magazine Retainer 15 90034 O-Ring 1 31 18410 Step Pin 16 18041 Cylinder 1 32 18230 Trigger 17 18050 Bumper 1 33 18240 Seal 18 18060-1 Trigger Valve Set 1 34 18463 Body 19 18070 Trigger Valve Spring 1 35 18270 Magazine Latch Spring 110 90055 O-Ring 1 36 18280 Magazine Latch 111 18080 Trigger Valve 1 37 94002-1 Air Plug 112 90005 O-Ring (Trigger Valve) 1 38 18290 Pin 213 90007 O-Ring (Trigger Valve) 1 39 95001 E-Ring 214 90009 O-Ring 1 51 90015 O-Ring 115 18100 Trigger Valve Stem 1 53 18330 Nose Cover 116 18120 Trigger Valve Guide 1 54 96002 Split Pin 117 90007 O-Ring 1 55 96001 Split Pin 118 91013-1 Hex. HD Soc Screw + Spring Washer 2 56 90035 O-Ring 120 91001 Hex. HD Soc Screw 2 57 18360 End Cap 121 17141 Nose 1 59 18350-1 Trigger Valve A Kit 122 15151 Nose Plate 1 61 18390 Double Trigger Latch Spring 123 17160 Magazine Cover 1 62 28100 Double Trigger 124 18170 Pusher Spring 1 63 18370 Pin 125 17180 Magazine 1 64 95002 C-Ring 226 17191 Pusher 1

S7116 Parts List (06-06-14)

13Interchange Brands, LLC

Parts Drawing and Schematics for S7116

S7116 Parts Drawing (07-10-14)

14 Interchange Brands, LLC

Notes

15Interchange Brands, LLC

Notes

Interchange Brands Operator’s ManualModels: S5016AL, S7116AL, SA1116AL and S7116

(08-07-14) Made In Taiwan DQ

Limited Five (5) Year Warranty for Pneumatic StaplersOur products are designed and constructed using the highest standards of both material and workmanship. We

warrant to the original retail purchaser that their nailers will be free from defects in material or workmanship for the warranty period of five years.

During the warranty period (which begins on the purchase date), we will repair or replace, at our option and expense, any product or part that is defective in materials or workmanship after examination by an Authorized Warranty Service Center, subject to the exceptions, exclusions and limitations described below. Any replacement product or part will carry a warranty for the balance of the warranty period applicable to the replaced product or part. A DATED SALES RECEIPT OR PROOF OF PURCHASE FROM THE ORIGINAL RETAIL PURCHASER IS REQUIRED TO MAKE A WARRANTY CLAIM. To make a warranty claim, you must return the product, with proper receipt/proof of purchase and return transportation charges prepaid, to us (your dealer) or an Authorized Warranty Service Center. We will perform our obligations under this warranty within a reasonable time after approval of the warranty claim.

WARRANTY EXCLUSIONSThe following warranty exclusions apply:1. Normal wear parts are not covered under this warranty. Normal wear parts include, for example, rubber

o-rings, seals and driver blades.2. This warranty does not cover parts damaged due to normal wear, misapplication, misuse, accidents, opera-

tion at other than recommended speeds, improper storage, or damage resulting during shipping.3. Products used in production/industrial applications are excluded from this warranty.4. Labor charges, maintenance, or loss, damage and repairs resulting from improper operation are not covered

by this warranty.

GENERAL WARRANTY CONDITIONSThis warranty will be honored, only if:1. Clean, dry, regulated compressed air has been used at air pressure not exceeding the maximum indicated on

the tool casting;2. No evidence of abuse, abnormal conditions, accident, neglect, misuse or improper modifications or storage

of the product exists; and3. No deviations from following recommended operating instructions, specifications, and maintenance sched-

ules exist. (Read Operator Manual for use, specifications, and maintenance instructions).This warranty is the only warranty for the product and we disclaim all other warranties. Any implied warranties

will be limited in duration to the applicable warranty period specified above. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Your remedies are solely and exclusively as stated above. We shall in no event be liable for incidental, consequential, indirect or special dam-ages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. In no event, whether as a result of a breach of contract, warranty, tort (including negligence) or otherwise, shall our liability exceed the price of the product that has given rise to the claim or liability. Any liability connected with the use of this product shall terminate upon the expiration of the warranty period specified above. No employee or representative of any distributor or dealer is authorized to make any change or modification to this warranty.

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.