INDUSTRY AND MAINTENCE CATALOG - Dilube

INDUSTRY ANDMAINTENCE CATALOG

www.dilube.com

01 I DIVISIÓN INDUSTRIA Y MANTENIMIENTO www.dilube.com

www.dilube.com

www.dilube.com INDUSTRY AND MAINTENANCE I 01

HYDRAULICOILS

High-quality hydraulic fluids. Good ageing stability and additives for improving corrosion protec-tion. Excellent viscosity-temperature behaviour. The range includes special ash-less oils, detergent hydraulic oils and high temperature oils.

PRODUCT VISCOSITY ISO VG DESCRIPTION / APPLICATIONS ESPECIFICATIONS

SIL POWER HLP 22, 32, 46, 68, Hydraulic fluid Comply DIN 51524 part II, 100 y 150 HLP y HM HLP and ISO 6743/4HM SIL POWER HV 32, 46, 68 y 100 Hydraulic fluid Comply DIN 51524 part III HVLP y HV HVLP and ISO 6743/4HV

SIL HIDRAULIC HLPD 32, 46, 68 y 100 Hydraulic fluid HLP - and HM. Ash-less

SIL LHM - Oil for hydraulic circuits - and suspensions

SIL POWER ATF DEXRON II - Automatic transmission fluid GM dexron II – Allison C-4

SIL HIDRAULIC HFC 46 46 Water glycol hydraulic Comply ISO 6743-4 HFC fluid. Fire resistant

SIL HIDRAULIC HFU 46 - 68 Synthetic hydraulic fluid biodegradable. ISO 6743/4 HFDU Fire resistant

SLIDEWAYSOILS

Special oils for lubrication of horizontal and vertical slideways, with anti-splash properties. It contains adhesion and extreme pressure additives.

PRODUCT VISCOSITY ISO VG DESCRIPTION / APPLICATIONS

SIL GUIAS H EP 32, 68, 100 Horizontal slideways. EP and anti-splash additives

SIL GUIAS V EP 150, 220, 320, 460 Vertical slidedeways.EP and anti-splash additives

CLEANINGCIRCUIT OIL

Product designed to clean of hydraulic and heating circuits. Also machine-tool baths.


SIL LCT 32 32 Product for cleaning hydraulic and heating circuits

GEAR OILS

Lubricating oils formulated with mineral or synthetic bases, specially designed for withstanding extreme loading and temperature situations. Recommended for gear systems, reducers and bearing boxes, where lubrication with EP and antiwear properties are required.


SIL GEAR EP 68, 100, 150, 220, Mineral DIN 51517 Part 3 CLP, 320, 460, 680, 1000 gear oil base AGMA 9005 D94, US STEEL 224

SIL GEAR AX - 68, 100, 150, 220, Synthetic gear oil. DIN 51517 Part 3 CLP,SYNT ATOX 320, 460 Non toxiic PAO base. AGMA 9005 D94 – 250/4, NSF H-1, FDA US STEEL 224, C.M. P-59 SIL GEAR PG 80, 100, 150, 220, Synthetic gear oil. DIN 51517 Part 3 CLP, 320, 460, 680 Polyglycol base. AGMA 9005 D94, US STEEL 224

02 I INDUSTRY AND MAINTENANCE www.dilube.com


SIL ENGRAS 32, 68, 100, 150, 220 General lubricants

SIL ENGRAS TF - General lubricants with PTFE

GENERALLUBRICANTS

General lubrication for machinery and mechanisms subjected to moderate loads and speeds.High lubricity and thermal stability.

COMPRESSORSAND TURBINES OILS

Mineral and synthetic oils for air compressors with specific additives. High oxidation stability.


SIL VDL 32, 46, 68, 100, 150 Compressor VDL oil DIN 51 506 VDL

SIL COMPRESOR SYNT 32, 46, 68, 100, 150 Synthetic compressor oil DIN 51 506 VDL

HEATTRANSFER FLUIDS

Fluids used in closed circuits with good thermal stability and resistance to oxidation. It offer good protection to heating circuits and very low residue formation.


SIL TERMICO 22, 32 Mineral thermic fluid DIN 51522 Type Q

SIL TERMIC 22 Synthetic thermal oil closed loop DIN 51522 Type Q

SIL TERMIC 46 SYNT 46 Synthetic thermal fluid DIN 51522 Type Q

SIL BAKER AT 32 Non-toxic thermal oil DIN 51522 Type Q, NSF HT-1

VACUUM PUMPS ANDPNEUMATIC CIRCUIT OIL

High-quality mineral and synthetic oils.


SIL CN-20 22 Oil for pneumatic circuits

SIL PLX 50 BV 100 Mineral oil for vacuum pumps

SIL PLX 150 BV 150 Mineral oil for vacuum pumps

SIL SINTETIC BV 100 100 Ester base oil for vacuum pumps SIL SINTETIC VAC 100 PAO base oil for vacuum pumps. NON-TOXIC


CHAINOIL

Synthetic oil for high-temperature chains.


SIL CHAIN TNQ 320 320 Synthetic oil for chains

FOOD GRADEMULTIPURPOSE OIL

Multipurpose oils for the food industry. Complies with hydraulic, compressor and gearing standards.


SIL DOVER RP 32, 46, 68, 100, Non-toxic multifunctional oil HLP/HM, CLP, VDL 150, 220, 320, 460 NSF H-1

DIELECTRICOIL

Mineral and silicone fluids with dielectric capacity.

PRODUCT VISCOSITY DESCRIPTION / APPLICATIONS

SIL POWER 530 10 cSt Dielectric oil for transformers

SIL POWER FSD 50 50 cSt a 25ªC Dielectric fluid

CHAINSAW LUBE

Mineral oils for use in chainsaws. High lubrication capacity. Anti-splash additives.


SIL PLX-54 100 Special lubricating oil


LUBRICANTGREASES

Multipurpose greases formulated with mineral oil and/or synthetic base for all kinds of industrial applications. The range includes special lubricants for severe applications (high-temperature, moderate loads, high speeds) and lubricants for food industry.

PROCESSOILS

High-quality mineral oils, formulated with highly refined and hydrogenated paraffinic bases. It guarantee excellent natural lubrication properties.

PRODUCT VISCOSITY DESCRIPTION / APPLICATIONS

SIL PLX 10 a 1000 cSt High quality process oils SIL PLX - EC 12 a 68 cSt Mineral based process oils

PRODUCT CONSISTENCY NLGI DROPPING POINT DESCRIPTION / APPLICATIONS

SIL GREASE CA-2 2 > 100 Calcium grease

SIL GREASE L-EP 00, 0, 1, 2 > 180 Lithium grease extreme pressure

SIL GREASE MOLY-2 2 > 180 Lithium grease extreme pressure with molybdenum disulphide

SIL GREASE 2 > 260 Complex lithium grease for high temperatures CLT-2 AZUL with EP and anti-wear additives

SIL GREASE 2 > 220 Complex synthetic grease for HIGH SPEED high speed bearings

SIL GREASE ARS 2 None Special chain grease with PTFE

SIL GREASE NTO-2T 2 None Inorganic grease for Food industry. Complies NSF H-1

SIL GREASE NTX-2 2 None Inorganic synthetic grease for Food industry. Complies NSF H-1

SIL GREASE CU/SPG 2 None Anti-seize copper paste for high temperature conditions

SIL GREASE SK-100 2 None Translucent inorganic silicone grease

SIL GREASE SK-900 2 None Translucent inorganic silicone grease


PRODUCT FLASHPOINT DESCRIPTION / APPLICATIONS

SIL DSG > 60 Water soluble degreaser

SIL DS-40 > 60 Multipurpose pure degreaser. Does not contain chlorine

SIL DSG-30 FDA - Non-toxic degreaser. Highly evaporation rate. Complies FDA

SIL EVP-30 - Non-toxic degreaser. Highly evaporation rate. Complies NSF H-1

DEGREASERS

Products based on solvents of different characteristics used to clean parts and surfaces.

SPRAYS

PRODUCT DESCRIPTION / APPLICATIONS

SIL CONTACT CLEANER Dielectric solvent, especially for cleaning electrical components

SIL MULTIUSO 10X1 Multipurpose lubricating with PTFE

SIL CHAIN LUBE ARS High performance white grease with PTFE

VASELINA BLANCA EN SPRAY Petroleum jelly spray for the protection of battery terminals and wiring

SIL SILICON SPRAY Silicone polish for surfaces

CLEANINGPRODUCTS


DILEX PASTA Hand cleaning cream with high cleaning power, contains abrasive micro-particles


SOLUBLE RELEASE AGENT: Release agents that form white and stable emulsions. Especially for wooden moulds.


SIL DESENCOFRANTE TLA Water miscible release agent

SIL DH-25 Water miscible release agent

PURE RELEASE AGENT: Release agents miscible in oil or diesel for release and protect of metal moulds.


SIL DH-320 Release agent formulated with mineral oils. Mould release, tackiness and anti-rust additives

SIL DH-300 Release agent formulated with mineral oils. Mould release, tackiness and anti-rust additives. Odourless

DIRECT RELEASE AGENT: Low-viscosity release agents for direct use. To release beams, joists, posts, kerbs, columns and grids for farms.


SIL DHP-2100 Very low viscosity release agent formulated with mineral oils, mould release, tackiness and anti-rust additives

SIL DH-505-AX Low-viscosity release agent formulated with mineral oils. Suitable for improved protection of metal moulds

VEGETAL RELEASE AGENT: Release agents and non-stick products formulated based on plant oils and synthetic products.


SIL DH-7 VGT Pure release agent with antioxidant

SIL ASF VEGETAL Non-stick product for asphalts and tar. Provides stable solutions

RELEASE AGENTS


MEDICINAL PETROLEUM JELLIES: Petroleum jellies with the highest degree of purity, suitable for direct contact with food and applications in the pharmaceutical, cosmetics and chemical industries.

It meets the most demanding pharmaceutical standards:• Real Farmacopea Española, EuP, BP, USP y CODEX.• F.D.A. 21 CFR 172.880.

PETROLEUM JELLIES (VASELINE)

PRODUCT VISCOSITY cSt DESCRIPTION / APPLICATIONS

ACEITE DE VASELINA MEDICINAL V‐80 15 White mineral oil

ACEITE DE VASELINA MEDICINAL V‐160 32 Medium white mineral oil

ACEITE DE VASELINA MEDICINAL V‐350 68 Heavy white mineral oil

SIL DOVER 190 T 19 Technical medicinal oil

High purity oils. Suitable for direct contact with food and applications in the pharmaceutical, cosmetics, veterinary and food industries.

It meets the most demanding pharmaceutical and food standards:• Real Farmacopea Española, EuP, BP y USP.• F.D.A. CFR 172.878 y 178.3620 (a).• USDA H1 NSF.

WHITE MINERAL OILS


VASELINA FILANTE MEDICINAL SD.58 White medicinal petroleum jelly

VASELINA FILANTE MEDICINAL SD.50 White medicinal petroleum jelly

VASELINA FILANTE BLANCA NZ-41 White petroleum jelly

TECHNICAL PETROLEUM JELLIES: Industrial petroleum jelly applications.


VASELINA FILANTE TÉCNICA B/2 Yellow petroleum jelly. Industrial application

VASELINA FILANTE INDUSTRIAL Brown petroleum jelly. Industrial application


www.dilube.com DIVISIÓN INDUSTRIA Y MANTENIMIENTO I 06

www.dilube.com

OUR TECHNOLOGY

ACCESSIBLE TO ALLTHE WORLD

Portugal

Morocco

Turkey

IndiaEgypt

Perú

CubaMexico

Algeria

Spain

Avda. Bertrán Güell 7808850 GAVÀ - BARCELONA (SPAIN)

T. (+34) 93 611 01 01 • F. (+34) 93 662 07 75

[email protected] • www.dilube.com

Documents

INDUSTRY AND MAINTENCE CATALOG - Dilube