Upload
pca97
View
220
Download
0
Embed Size (px)
Citation preview
8/10/2019 Industrial Pumping
1/59
Industrial PumpingEquipment
Lincoln Industrial pumps and pumpingstations are manufactured and assembledto meet the most demanding applications.
Mike Fisk, Lincoln Technical Center,Detroit, Michigan
Back to Main Menu
8/10/2019 Industrial Pumping
2/59
Were the largest and mostsuccessful company in our fieldbecause we continually satisfy ourcustomers with the worlds bestlubrication and pumping systems.For almost 90 years, companies
have relied on our technical andquality leadership, our world-classmanufacturing and customerservice, and our vast network ofdistributors and support facilities.
Lincoln Industrial develops newproducts and systems at researchand development facilities in theU.S., Germany and India thatprovide global and regionalapplication solutions.
We have solutions for largeprocessing plants, automotivemanufacturing, pulp and papermills, and food and beveragefacilities. Virtually every industrialprofessional involved in operations andmaintenance can benefit from LincolnIndustrial systems.
On the road or in the field, Lincoln Industrialprotects heavy equipment used in mining,construction, agriculture and over-the-roadtrucking. The worlds leading manufacturers
offer our systems as standard equipment orfactory options.
Lincoln Industrial builds precisionmetal components, state-of-the-artelectronic controls, and the indus-trys top-performing pump systems.Our quality systems in the UnitedStates and Germany areISO 9001 registered.
With five technical supportcenters on three continents, anda network of system houses anddistributors supported by regionalsales and service offices, ourcustomers can always draw onour worldwide resources.
To make sure your investmentresults in significant savings,Lincoln Industrial developeda unique program calledBearingSaver. You not only geta complete audit of your facility,you also receive an analysis ofyour return on investment.
People, Capabilities and Systems toSave Money and Increase Productivity
Worldwide Support
Customer Service
Research &Development Bearing
Mobile Equipment
QualityManufacturing
IndustrialSolutions
Back to Main Menu
8/10/2019 Industrial Pumping
3/59
Industrial Pumping EquipmentIntroduction
2
Lincoln Industrial provides the technologically advanced pumps required for todays
demanding applications because we can draw on over 50 years experience with
industrial pumping systems.
Our pumps excel in applications that range from the transfer of lighter fluids
(oils, solvents, adhesives, etc.) to the movement of medium-viscosity materials
(RTV silicone, greases, coatings, plastisols, offset inks, etc.) to the tough job ofpumping very heavy-viscosity materials (ink flushes, epoxies, mastics, etc.).
Our systems are found in diverse industries, including printing and publishing,
automotive manufacturing, rotational molding, and other demanding industries
that require time-proven systems for application of their materials in manufacturing.
PowerMaster III Pumps
Building upon our success with standard drum pumps, we have taken their design
into the 21st century with completely pneumatic, modular air motors and six-inch
stroke pumps for greater material output. Accessories include an AirBrake option
for prevention of pump runaway due to an empty container, a broken supply line
or other loss of pump prime. A variety of packing materials ensures correct packing
based on material compatibility.
PileDriver III Pumps
For high volume applications of viscous materials from standard drums or bulk
tanks, these industry-standard pumps incorporate the same completely pneumatic,
modular air motors. Along with the AirBrake option and a wide variety of packing
materials, PileDriver III pumps feature a patented leakless gland design that protects
the pump from gland seal failure and subsequent downtime for replacement.
We have a wide range of system accessories, from pressure primers and other
mounting accessories to material control valves, ejectors, measuring valves, air
controls and system hardware.
Selection of system accessories is based on general system type and your
particular systems needs. Our network of systems house distributors is ready to help design the industrial pumping
system that is right for you. Contact the Lincoln Industrial Technical Service Department (314-679-4200, ext. 782) forthe name of your nearest Systems House Distributor.
Spray System
Material is transferred from an original
container through a supply line to spray
guns or nozzles, which are either airless
(material atomized by pressure only), or
air-assisted (material atomized after being
mixed with air at the gun or nozzle). Spray
systems are used for:
Airless paint spray-contractors, in plant Die lubricant spray
Trough grease spray in bakeries
Protective coatings
Cold roof coatings and restaurant
spray systems
Sound deadener
Rust proofing
Adhesives and sealants
Air Operated
Elevator
PowerMaster
Pump
Air Supply
Regulator Gauge
Solenoid Valve
AutomaticSpray Head
Spray Gun
MaterialAgitator
Back to Main Menu
8/10/2019 Industrial Pumping
4/593
Industrial Pumping EquipmentIntroduction
Transfer System
Material is transferred from its original
container to another point. Typically, the
simple transfer of low-viscosity fluids through
relatively short supply lines requires low-
pressure, high-volume pumps. If higherviscosity fluids are involved, or longer supply
lines are required, a pump capable of higher
pressures becomes necessary. Transfer
systems transfer:
Printing inks to press fountains
Adhesives to reservoirs on packaging
machinery
Lubricants to smaller containers in remote
locations
Materials to high-pressure pumps for spray
or flow applications
Measure System
Material is pumped from original containers
through the supply lines to measuring valves
or ejectors, which in turn meter precise
amounts of material to a work piece.
Typical measure systems include:
Multiple shots in patterns of adhesives
used to bond substrates, such as
automobile hoods and doors
Measured lubricant applied to electric
motors in appliance manufacturing
Single-shot applications of adhesives
or sealants used in manufacturing
Cartridge filling lines
Flow System
Material is pumped from the original contain-
er through the supply line to a flow gun which
applies the material to a work piece. Typical
flow systems include:
Adhesives applied to substrates forbonding in construction and other
industries
Adhesives used in the manufacture of
modular or mobile homes
Sealants applied during manufacturing
to various parts of vehicles, including
sunshields, tail lights, weld lines and
hem flanges
Air Filter
Regulator-GaugeLubricator
Regulator-Gauge
Air Supply
PileDriver
Portable PressurePrimer
Control
Valve orFlow Gun
RegulatorGauge
MeasuringValve
ManualFour Way
Valve
AirOperated
Ejector
LubricatorRegulator Gauge
Filter
PileDriver
Twin Post
Pressure Primer
Stand Pipe
Control Valve
Quarter Turn
Valve
Ink
Supply
PileDriver
Lubricator
Regulator GaugeFilter
Back to Main Menu
8/10/2019 Industrial Pumping
5/59
Industrial Pumping EquipmentPowerMasterIII
4
Features State of the art, fully pneumatic Air Motors, 3468 inches
(76101152203 mm) diameter.
Full 6" stroke for greater output per cycle.
Modular design for easy repair.
Only 5 moving parts, no metal to metal contact.
Newly designed pump tubes offer ratios and outputs to fit any application.
Available to fit any drum or pail size.
Offered in carbon steel, stainless steel or hard chrome plated.
Complete selection of packing materials available.
Full line of priming equipment and mounting devices.
Ball style for fluid materials, shovel foot style for high viscosity
non-fluid materials.
Series III Air Motors
Full pneumatic operation for longer life and durabilityonly five moving parts.
Total modular design for ease of service and maintenance.
Quiet operationmeets or exceeds OSHA requirements at all recommended
operation air pressures.
Interchangeable with all PowerMaster III Pump Tubes.
Acceptability of Pump Monitors and controls.
AirBrake
Shuts down pump immediately when excessive pump cycle speed
(runaway) occurs.
Prevents pump damage due to a runaway condition.
Indicates system fault caused by empty container or broken supply line.
Limits spills due to pump outlet hose failure.
Sends fault signal to remote alarm locations with optional 244398 signal kit.
Can be ordered already installed (refer to Pump Specification Chart).
Can be added later. Order Model 84988.See Pump Selection Chart in this section.
Back to Main Menu
8/10/2019 Industrial Pumping
6/59
8/10/2019 Industrial Pumping
7/59
Pump Model Pump Pump Material Output ApproximateStd. Air Tube Air Motor Diameter Tube Outlet Per Cycle Cycles per
Motor Only Ratio Style Model in. / mm Model N.P.T.F. cu. in. / cc gal / liters
2061 55 gal Std. 84808 849852065 42:1 16 gal w/ AirBrake 8 / 203 849842064 Stub *94808 849862021 55 gal Std. 84806 849852025 24:1 16 gal w/ AirBrake 6 / 152 84984
2024 Stub *94806 84986" 11.9 / 195 20 / 52001 55 gal Std. 84804 84985
2005 12:1 16 gal w/ AirBrake 4/ 108 849842014 Stub *94804 849862052 55 gal Std. 84985
2055 6:1 16 gal 84803 3 / 76 84984
2051 Stub 84986
Industrial Pumping EquipmentPowerMasterIII Pump Selection Chart
6
Ball Pumps
2072 55 gal Std. 84808 84976
2079 80:1 16 gal w/ AirBrake 8 / 203 84977 6.7 / 110 35 / 9*94808
207164:1
55 galStd. 84806
849784.6 / 75 51 / 13
2078 16 galw/ AirBrake
849792070
44:155 gal
*94806
6 / 15284976
6.7 / 110 35 / 92077 16 gal 84977
*206932:1
55 galStd. 84804
84978 "4.6 / 75 51 / 13
*2076 16 galw/ AirBrake 4/ 108
84979*2068
20:155 gal
*9480484976
6.7 / 110 35 / 9*2075 16 gal 84977*2067
15:155 gal 84978
4.6 / 75 51 / 13*2074 16 gal Std.
3 / 7684979
*206610:1
55 gal 84803 849766.7 / 110 35 / 9
*2073 16 gal 84977
Shovel Foot PumpsPacked Piston
2062 55 gal Std. 84808 84991
206384:1
16 galw/ AirBrake 8 / 203
849926.1 / 100 38 / 10
*94808
202380:1
55 galStd. 84806
849933.7 / 61 63 / 16
2027 16 galw/ AirBrake 6 / 152
84994
202248:1
55 gal*94806
849916.1 / 100 38 / 10
2026 16 gal 84992
200475:1
55 gal 849972.1 / 34 111 / 29
2008 16 gal 84998
201050:1
55 galStd. 84804
849953.0 / 49 78 / 20
2011 16 galw/ AirBrake 4/ 108
84996
2003
40:1
55 gal
*94804
84993 "
3.7 / 61 63 / 162007 16 gal 849942002
24:155 gal 84991
6.1 / 100 38 / 102006 16 gal 84992
204536:1
55 gal 849972.1 / 34 111 / 29
2049 16 gal 84998
204424:1
55 gal 849953.0 / 49 78 / 20
2048 16 gal Std.3 / 76
84996
204320:1
55 gal 84803 849933.7 / 61 63 / 16
2047 16 gal 84994
204212:1
55 gal 849916.1 / 100 38 / 10
2046 16 gal 84992
Shovel Foot PumpsPlunger and Bushing
* Order pump tube and air motor separately for these 8 models or when ordering AirBrake equipped models.
Low to Medium Viscosity PumpsCarbon Steel for Transfer of Non-Corrosive Materials
Back to Main Menu
8/10/2019 Industrial Pumping
8/597
Industrial Pumping EquipmentPowerMasterIII Pump Selection Chart
Gallons / Liters Per Minute Minimum I.D. Air Consumption Per Cycle
Air Supply Hose S.C.F.M. @ M3/Min. @ S.C.F.M. @ M3/Min. @30 CPM 50 CPM 70 CPM in. / mm 70 psig 4.8 bar 100 psig 6.8 bar
" / 20 1.9 0.054 2.6 0.074
1.1 0.031 1.6 0.045
1.5 / 5.8 2.6 / 9.7 3.9 / 14.6 " / 12
0.8 0.023 1.1 0.031
" / 10 0.5 0.014 0.7 0.02
0.9 / 3.3 1.5 / 5.5 2.2 / 8.2 " / 20 1.9 0.054 2.6 0.074
0.6 / 2.3 1.0 / 3.8 1.5 / 5.71.1 0.031 1.6 0.045
0.9 / 3.3 1.5 / 5.5 2.2 / 8.2" / 12
0.6 / 2.3 1.0 / 3.8 1.5 / 5.70.8 0.023 1.1 0.031
0.9 / 3.3 1.5 / 5.5 2.2 / 8.2
0.6 / 2.3 1.0 / 3.8 1.5 / 5.7
" / 10 0.5 0.014 0.7 0.020.9 / 3.3 1.5 / 5.5 2.2 / 8.2
0.8 / 3.0 1.3 / 5.0 2.0 / 7.5 " / 20 1.9 0.054 2.6 0.074
0.5 / 1.8 0.8 / 3.0 1.2 / 4.5 1.1 0.031 1.6 0.045
0.8 / 3.0 1.3 / 5.0 2.0 / 7.5
0.3 / 1.0 0.5 / 1.7 0.7 / 2.6
0.4 / 1.5 0.6 / 2.5 1.0 / 3.7 " / 12 0.8 0.023 1.1 0.031
0.5 / 1.8 0.8 / 5.0 1.2 / 4.5
0.8 / 3.0 1.3 / 5.0 2.0 / 7.5
0.3 / 1.0 0.5 / 1.7 0.7 / 2.6
0.4 / 1.5 0.6 / 2.5 1.0 / 3.7" / 10 0.5 0.014 0.7 0.02
0.5 / 1.8 0.8 / 5.0 1.2 / 4.5
0.8 / 3.0 1.3 / 5.0 2.0 / 7.5
Note:Air motors and pump tubes shipped separately. Assembly required.
Back to Main Menu
8/10/2019 Industrial Pumping
9/59
Industrial Pumping EquipmentPowerMasterIII Special Application Pump Selection Chart
8
Pump Model Pump Pump Material Output ApproximateStd. Air Tube Air Motor Diameter Tube Outlet Per Cycle Cycles per
Motor only Ratio Style Model in. / mm Model N.P.T.F. cu. in. / cc gal / liters
848082061-7 42:1 w/ AirBrake 8 / 203
94808*84806
2021-7 24:1 w/ AirBrake 6 / 152
55 gal 94806* 84983 " 11.9 / 195 20 / 584804
*2001-7 12:1 w/ AirBrake 4 / 10894804
*2052-7 6:1 84803 3 / 76
Hardened Steel for Non-Corrosive Abrasive Materials
Chrome Plated for Mildly Corrosive and Abrasive Materials
2061-9 55 gal 84808 84981
42:1 w/ AirBrake 8 / 2032064-9 Stub 94808* 84987
2021-9 55 gal 84806 8498124:1 w/ AirBrake 6 / 152
2024-9 Stub 94806 84987 " 11.9 / 195 20 / 5
*2001-9 55 gal 84804 8498112:1 w/ AirBrake 4 / 108
*2014-9 Stub 94804* 84987
*2052-9 55 gal 849816:1 84803 3 / 76
*2051-9 Stub 84987
Stainless Steel for Corrosive and Water Borne Materials
84808
2061-8 42:1 w/ AirBrake 8 / 20394808*84806
2021-8 24:1 w/ AirBrake 6 / 152
55 gal 94806* 84982 " 11.9 / 195 20 / 584804
*2001-8 12:1 w/ AirBrake 4 / 10894804
*2052-8 6:1 84803 3 / 76
* Order pump tube and air motor separately for these 8 models or when ordering AirBrake equipped models.
Ball Pumps
Back to Main Menu
8/10/2019 Industrial Pumping
10/599
Industrial Pumping EquipmentPowerMasterIII Special Application Pump Selection Chart
Gallons / Liters Per Minute Minimum I.D. Air Consumption Per Cycle
Air Supply Hose S.C.F.M. @ M3/Min. @ S.C.F.M. @ M3/Min. @30 CPM 50 CPM 70 CPM in. / mm 70 psig 4.8 bar 100 psig 6.8 bar
" / 20 1.9 0.054 2.6 0.074
1.1 0.031 1.6 0.045
1.5 / 5.8 2.6 / 9.7 3.9 / 14.6 " / 12
0.8 0.023 1.1 0.031
" / 10 0.5 0.014 0.7 0.02
" / 20 1.9 0.054 2.6 0.074
1.1 0.031 1.6 0.045
1.5 / 5.8 2.6 / 9.7 3.9 / 14.6 " / 12
0.8 0.023 1.1 0.031
" / 10 0.5 0.014 0.7 0.02
" / 20 1.9 0.054 2.6 0.074
1.1 0.031 1.6 0.045
1.5 / 5.8 2.6 / 9.7 3.9 / 14.6 " / 12
0.8 0.023 1.1 0.031
" / 10 0.5 0.014 0.7 0.02
Note:Air motors and pump tubes shipped separately. Assembly required.
Back to Main Menu
8/10/2019 Industrial Pumping
11/59
Industrial Pumping EquipmentOptional Kits for PowerMasterIIIPumps
10
Patented* Leakless Gland Assembly
The gland seal of all reciprocating positive displacement pumps is its weakest
point and is the single most common cause of pump failure, lost downtime and
maintenance expense. Lincolns new gland design uniquely addresses the causes
for premature gland seal failure.
A special protective bushing (or sleeve) with concentric grooves creates alabyrinth path to reduce the internal operational pressure as well as the pressure
fluctuations developed during pump stroke changeover.
Leakless Gland Assembly is standard with Packed Piston Pumps and is available
for all PowerMaster III Pumps, as an accessory.
* U.S. Patent No. 4,976,192
Model 86213 Lube Cup Kit
For all PowerMaster III pump tubes. Used in conjunction with the gland
protection sleeve to prolong service life of gland packing. Prevents material
from drying out on plunger.
Packing Kits for PowerMaster III Pump TubesLincoln offers alternate packing kits of Teflon, Ultra-High Molecular Weight
(UHMW) Polyethylene and Viton for some PowerMaster III Pump Tubes becausemany materials used in todays manufacturing environment may not be compati-
ble with the standard seals. Please consult Lincoln Industrial for compatibility of
the material to be dispensed with standard packings or alternate packing kits.
Teflon and Viton are registered trademarks of the Dupont Company.
Model 84112 Leather Packed Piston KitStandard on pump tube 84983 (abrasive resistant), available as option for other
ball foot design pump tubes.
Order Model For Pump Tubes
86214 All Ball Foot Design Pump Tubes
86215 84997 & 84998
86216 84993 & 84994
86217 84995 & 84996
86218 84991 & 84992
Gland Protection Sleeves
Pump Tube Teflon Kit UHMW Polyethylene Kit Viton Kit
8497686223 86225 86227
84977
8497886224 86226 86228
84979
84881
84982 84984
84502
8622184985
84986
84987
Model 86214
Model 86213
Model 84502
Model 84112
Back to Main Menu
8/10/2019 Industrial Pumping
12/5911
Industrial Pumping EquipmentPowerMasterIIIPump Accessories
Drum Covers
Model 81412Standard 55 gallon drum cover for mounting PowerMaster III series drum pumps
on full open drums.
Model 83166Special 55 gallon drum cover for mounting PowerMaster III series drum pumps onfull open drums. Includes port for installation of material agitator.
Model 81538Standard 16 gallon drum cover for mounting PowerMaster III series drum pumps
on full open drums.
Follower Plates
Model 83369
For 400 pound drums.
Model 84780For 120 pound drums.
Model 83132 Bung BushingThis 55 gallon drum bung bushing screws into the bung opening of the drum
to secure any Lincoln Industrial PowerMaster III Pump.
Model 84963 Flange Mounting AssemblyUsed for rigid mounting of PowerMaster III Pumps to the top of fabricated
bulk tanks.
Model 84826 Wall Mount Bracket Kit
For PowerMaster III Air Motor assemblies.
Model 84945 Suction Kit
Used with PowerMaster III Stub Pumps for convenient transfer of petroleum
products from drums, bulk tanks or reservoirs. Includes bung bushing suction
tube, hose and coupling assembly and other hardware.Note: 2"x1" bell reducer requirednot included.
Model 81412
Model 83166
Model 81538
Model 83369
Model 83132
Model 84963
Model 84826
Model 84945
Back to Main Menu
8/10/2019 Industrial Pumping
13/59
Industrial Pumping EquipmentPowerMasterIIIPump Accessories
12
Model 16177 Foot Valve Adapter
Converts inlet of Models 84984 and 84985 Ball Type PowerMaster III Pumps to
1" NPTF female thread for attaching extension pipe.
Drum DolliesModel 8437755 gallon (400 lbs) band-type drum dolly with four swivel casters and
screw clamps.
Model 8419216 gallon (120 lbs) band-type drum dolly with four swivel casters and
screw clamps.
Model 83727 Standpipe/Model 83732 Adapter KitUse of Model 83732 Adapter & Bracket Kit will enable PowerMaster III pumps
to be assembled to Model 83727 Stand Pipe for pumping from bulk tanks. Inlet3" NPT female.
Model 83163 Material AgitatorInstalls on Model 83166 Drum Cover. For use in 55 gallon drum system where
material requires agitation. Order the following accessories separately:
720363' Air Hose; 12080Bushing; 67041Tee; 11197Nipple; and
66645Adapter Union.
Model 16177
Model 84377
Model 83727
Model 83163
Back to Main Menu
8/10/2019 Industrial Pumping
14/5913
Industrial Pumping EquipmentElevator & Primers for PowerMasterIII Pumps
Elevator, Primer and Pressure Primers
Lincolns mounting accessories include an elevator (model 1709) to facilitate drum
change-over by lifting the pump from an empty drum and lowering it into a new
drum with minimum effort. Primers and Pressure Primers are available for positive
priming of viscous materials which are forced into the pump inlet by the down-
ward force of the follower. Models are available for most applications from fivegallon pails to 55 gallon drums. Models include followers with O-ring seals (single
O-rings for 5 gallon pail units and double O-rings for 55 gallon drum units) which
seal the container of material from outside contamination and drying while wiping
the containers sides clean.
Pressure Primers include a four-way valve which permits the air supply to be
coupled to the unit at all times. Use of an air regulator and gauge is recommend-
ed. In order to prevent damage to pumps caused by operating after a drum is
empty, a low level air cut-off assembly is recommended.
PrimingPressures
For Drum Operating PSI / BarHeight
BaseModel Size Description Air Pressure @70 @100 Lowered Raised Dim.
Gal. psi / bar 4.9 7 in. / cm in. / cm in. / mm
NABeam
1709 55Single Post 50-200 NA NA 73 112
LengthElevator 3-14 185.4 284.519 / .5
360Rotation
Single Post PumpHoist & Follower for
2716* 55low to med. 50-200 NA NA 73 110 12x14
viscosity materials 3-14 185.4 280.7 317.5x355.5100K to 200Kcentipoise range
1701** 5
Single Post for 30-150 4.4 6.3 42 50 22x22
viscous material 3-10 .3 .44 108 128 600x600
1704 55 over 500K 40-100 5 7.1 89 89 26x26
centipoise 3-7 .35 .5 226 226 700x700
Twin Post forviscous materials
1736 55 in the 200K40-150 2.7 3.7 66 103 24x36
to 500K3-10 .2 .26 167.6 261.6 600x1000
centipoise range
Notes:**A butyl rubber wiper is available for this primer for materials not compatible with Buna-N: order separately
Model 34555.**Model 83943 portability kit is available for model 1701. Includes axle and wheels.
For Pressure Primers for 120 lb. drum pumps or for follower rings of materials other than standard
Buna-N, contact Lincoln Industrial Technical Services.
Model 1709
Model 1701 Model 1704
Model 1736
Model 2716
Back to Main Menu
8/10/2019 Industrial Pumping
15/59
Industrial Pumping EquipmentPrimer, Pressure Primer and Air Motor Accessories
14
Low Level Air Cut-Off Assembly
Model 83811For use with Model 1704 Pressure Primer. Mounts directly to elevator support.
Automatically shuts off air flow to pump when drum of material is emptied.
Eliminates unnecessary parts wear caused by continuous pump action when
drum is empty. Inlet " N.P.T.(F).
Model 83970Same as Model 83811, except for use with Model 2716.
Model 84143Same as Model 83811 except for use with Model 1736.
Chimeless Drum KitsBecause some materials are supplied in straight sided or chimeless drums,
Lincoln has developed hold-down kits which facilitate follower and pump
extraction from these drums. Kits are available as follows:
Kit No. For Model
84167 1704
84503 1736
Airline Kits for Primer and Pressure PrimersModel 84144Includes filter-lubricator-regulator, bracket and fittings to adapt air accessories tomodels 2716, 1736 and 1704. Includes " controls.
Model 84141Same as model 84144, except includes " controls.
Model 84722 Series III Air Motor Exhaust AdapterReplaces standard muffler. Converts exhaust port to " NPT female thread.
Model 84723 Series III Air Motor Cover Panel KitMetal cover fits over tie rods. Encloses moving plunger rod.
Model 84167
Model 85387-8Included in 84144 Kit
Model 84723
Back to Main Menu
8/10/2019 Industrial Pumping
16/5915
Industrial Pumping EquipmentPileDriverIII
Series III Air Motor Features
These fully pneumatic Air Motors reverse stroke direction without mechanical
linkages and are simpler and more reliable than older designs.
Air motors are 3-4-6-8-10 inches (76-101-152-203-254mm) diameter.
An air Signal Valve activates a Relay Valve at the end of each stroke.
The shifting Relay Valve changes the Power Valve position.
The Power Valve shifts air flow to the opposite side of the Power Piston to
reverse stroke direction.
Modular Construction: Air Motors are easy to install, maintain, and upgrade
with options like AirBrake.
Built-in Muffler: Meets or exceeds OSHA requirements at recommended
air pressures.
AirBrake Options: Stops runaway pump, prevents product spills, damage and
excess wear, and activates an optional remote alarm device. AirBrake availablealready installed (refer to pump specification charts) or can be ordered
separately as model 84988. For remote monitoring of AirBrake, order model
244398 signal kit.
PileDriver Series III Pump Tube Features Machined inlet casting: Set screws secure the inlet assembly and permit 360
outlet adjustment to facilitate system plumbing and provide for easy pump
removal/replacement.
Cartridge type gland with scrapers and patented protection bushing: Extendsthe life of gland packings by protecting them from excessive material build up
and pressure fluctuations. Cartridge removes easily for routine service.
Straight through pump tube and piston port design: Reduces internal friction
and the opportunity for solids entrapment.
Load bearing, chrome-plated internal pump tube surface: Distributes forces
between gland and pump tube to prolong seal life.
Choice of inlets: Shovel type for thick material or flat check for higher flow rates.
* Air motor available separately.
*Model 84921 Model 84904
Back to Main Menu
8/10/2019 Industrial Pumping
17/59
Industrial Pumping EquipmentPileDriverIII Pump Selection Chart
16
Pump Model Air Motor Pump Pump Output Approximate StrokeSTD. Air Model & Dia. Tube Tube Per Cycle Cycles per Length
Motor only Ratio in. / mm Model Style cu. in. cc gal / liters in. / mm
2375 75:1 Std. 84902 Shovel 12 196 20 / 5
2355 55:1 86810 84901 Shovel 17 278 14 / 4
2342 42:1 84900 Shovel 22 360 11 / 3
2320 20:1 w/ AirBrake 84921 Shovel 44 721 5 / 1 6 / 152
2345 45:1 94810 84904 Flat Check 18 295 13 / 3
2321 20:1 84922 Flat Check 46 754 5 /1
2319 10:1 10 / 254 84923 Flat Check 85 1393 3 /
2322 45:1 Std. 84902 Shovel 12 196 20 / 5
2323 35:1 84808 84901 Shovel 17 278 14 / 4
2325 25:1 84900 Shovel 22 360 11 / 3
2326 13:1 w/ AirBrake 84921 Shovel 44 721 5 / 1 6 / 152
2324 30:1 *94808 84904 Flat Check 18 295 13 / 3
2327 13:1 84922 Flat Check 46 754 5 / 1
2328 6:1 8 / 203 84923 Flat Check 85 1393 3 /
2349 25:1 Std. 84902 Shovel 12 196 20 / 5
2350 20:1 84806 84901 Shovel 17 278 14 / 4
2352 15:1 84900 Shovel 22 360 11 / 3
2353 7:1 w/ AirBrake 84921 Shovel 44 721 5 / 1 6 / 152
2351 18:1 *94806 84904 Flat Check 18 295 13 / 3
2354 7:1 84922 Flat Check 46 754 5 /1
2356 3:1 6 / 152 84923 Flat Check 85 1393 3 /
*2364 12:1 Std. 84902 Shovel 12 196 20 / 5
*2365 10:1 84804 84901 Shovel 17 278 14 / 4
*2367 7:1 84900 Shovel 22 360 11 / 3
*2368 3:1 w/ AirBrake 84921 Shovel 44 721 5 / 1 6 / 152
*2366 8:1 *94804 84904 Flat Check 18 295 13 / 3
*2369 3:1 84922 Flat Check 46 754 5 /1
*2370 1.5:1 4/ 108 84923 Flat Check 85 1393 3 /
*2371 6:1 Std. 84902 Shovel 12 196 20 / 5
*2372 4:1 84803 84901 Shovel 17 278 14 / 4
*2374 3:1 84900 Shovel 22 360 11 / 3
*2318 1.5:1 84921 Shovel 44 721 5 / 1 6 / 152
*2373 4:1 84904 Flat Check 18 295 13 / 3
*2329 1.5:1 84922 Flat Check 46 754 5 /1
*2341 1:1 3 / 76 84923 Flat Check 85 1393 3 /
* Order Pump Tube and Air Motor separately when selecting 3 and 4 air motors, and AirBrake equipped models.
** Cycles per minute.
Pump Tube Standard Polyurethane Kit Teflon Kit UHMW Polyethylene Kit
84900 84907 84912 8491384901 84911 84905 8490684902 84908 84914 8491584904 84909 84916 8491784921 84927 84928 8492984922 84930 84931 8493284923 84924 84925 84926
Packing Kit Selection Chart
Note: Standard polyurethane seal kits include all soft seals. Teflon and UHMW polyethylene seal kits include gland and piston u-cups only.
Model 84913
Back to Main Menu
8/10/2019 Industrial Pumping
18/5917
Industrial Pumping EquipmentPileDriverIII Pump Selection Chart
Pump Output GPM / LIT/Min. Approximate
Air Max. Min. I.D. of Air Consumption per Cycle
Inlet @ @ @ Outlet Press. Air Supply Material SCFM @ 70 psig SCFM @ 100 psig30 cpm** 50 cpm** 75 cpm** psi / bar Hose in. / mm Outlet M3/Min @ 4.8 bar M3/Min @ 6.8 bar
1.5 / 5.9 2.6 / 9.8 3.9 / 14.9 7500 / 517
2.2 / 8.3 3.7 / 13.9 5.5 / 20.8 5500 / 379
2.8 / 10.8 4.8 / 18.0 7.1 / 27.0 4200 / 290" NPT
5.7 / 21.6 9.5 / 36.0 14.3 / 54.0 2000 / 138 / 201 NPT
2.5 / 0.071 3.6 / 0.10Female
2.3 / 8.8 3.9 / 14.7 5.8 / 22.0 4500 / 311Female
5.8 / 22.6 9.9 / 37.7 14.9 / 56.5 2000 / 138
11.0 / 41.7 18.4 / 69.6 27.6 / 104.5 1000 / 69
1.5 / 5.9 2.6 / 9.8 3.9 / 14.9 4500 /310
2.2 / 8.3 3.7 / 13.9 5.5 / 20.8 3500 / 241
2.8 / 10.8 4.8 / 18.0 7.1 / 27.0 2500 / 172" NPT
5.7 / 21.6 9.5 / 36.0 14.3 / 54.0 1300 / 90 / 201 NPT
1.9 / 0.054 2.6 / 0.074Female
2.3 / 8.8 3.9 / 14.7 5.8 / 22.0 3000 / 207Female
5.8 / 22.6 9.9 / 37.7 14.9 / 56.5 1300 / 90
11.0 / 41.7 18.4 / 69.6 27.6 / 104.5 600 / 411.5 / 5.9 2.6 / 9.8 3.9 / 14.9 2500 /172
2.2 / 8.3 3.7 / 13.9 5.5 / 20.8 2000 / 138
2.8 / 10.8 4.8 / 18.0 7.1 / 27.0 1500 / 104" NPT
5.7 / 21.6 9.5 / 36.0 14.3 / 54.0 700 / 48 / 201 NPT
1.1 / 0.031 1.6 / 0.045Female
2.3 / 8.8 3.9 / 14.7 5.8 / 22.0 1800 / 124Female
5.8 / 22.6 9.9 / 37.7 14.9 / 56.5 700 / 48
11.0 / 41.7 18.4 / 69.6 27.6 / 104.5 300 / 21
1.5 / 5.9 2.6 / 9.8 3.9 / 14.9 2400 / 166
2.2 / 8.3 3.7 / 13.9 5.5 / 20.8 2000 / 138
2.8 / 10.8 4.8 / 18.0 7.1 / 27.0 1400 / 97" NPT
5.7 / 21.6 9.5 / 36.0 14.3 / 54.0 600 / 41 / 121 NPT
0.8 / 0.023 1.1/ 0.031
Female 2.3 / 8.8 3.9 / 14.7 5.8 / 22.0 1600 / 110 Female
5.8 / 22.6 9.9 / 37.7 14.9 / 56.5 600 / 41
11.0 / 41.7 18.4 / 69.6 27.6 / 104.5 300 / 41
1.5 / 5.9 2.6 / 9.8 3.9 / 14.9 1200 /83
2.2 / 8.3 3.7 / 13.9 5.5 / 20.8 800 / 55
2.8 / 10.8 4.8 / 18.0 7.1 / 27.0 600 / 41" NPT
5.7 / 21.6 9.5 / 36.0 14.3 / 54.0 300 / 21 / 101 NPT
0.5 / 0.014 0.7 / 0.020Female
2.3 / 8.8 3.9 / 14.7 5.8 / 22.0 300 / 21Female
5.8 / 22.6 9.9 / 37.7 14.9 / 56.5 300 / 21
11.0 / 41.7 18.4 / 69.6 27.6 / 104.5 200 / 14
Pump Tube Standard Polyurethane Kit Teflon Kit UHMW Polyethylene Kit
84900 85311 85321 8532784901 85312 85322 8532884902 85313 85323 8532984904 85314 85324 8533084921 85315 85325 8533184922 85315 85325 8533184923 85316 85326 85332
Gland Seal Kits
Note: Gland seal kits include gland u-cup and o-ring only. Model 85311
Note:Air motors and pump tubes shipped separately. Assembly required.
Back to Main Menu
8/10/2019 Industrial Pumping
19/59
8/10/2019 Industrial Pumping
20/5919
Industrial Pumping EquipmentPileDriverIII Pressure Primers
Pressure Primer Features
Positive priming force on the material.
Downward force of the follower forces material into the pump inlet.
This assures positive priming of high viscosity materials.
Follower has an Elastomer seal.
Wipers, single o-rings or double o-rings seal against the material containers
sides. This prevents drying and contamination of the material and wipes the
containers sides clean.
Four-way air valve control.
This directional valve controls up/down movement of the follower.
Primer unit remains coupled to the air system at all times.
(Use of an air regulator and gauge is recommended).
Primers available for a wide range of material container sizes.
Lincoln Industrial has primers for 5, 55 and 300 gallon material containers.
You can match the primer to the container size required for your application.
For U.S. Operating Priming PressureModel Drum Size Description Air Pressure psi / bar
gal psi / bar @70/5 @100/7
2718* 5 Single Post for30-150 4.4 6.3
viscous material 2-10 .3 .44
83274 55over 500 K 40-100 5 7.1centipoise 3-7 .35 .5
Single Post Pump Hoist &
2719 55Follower for low to medium 40-200 **Not **Notviscosity materials 100K to 3-14 applicable applicable
200K centipoise range
Twin Post (Twin 3") for viscous40-150 2.7 3.71735 55 materials in the 200K to 500K
3-10 .2 .26centipoise range
1765 55Twin Post (Twin 6") for viscous 40-100 8.5 12materials over 500K centipoise 3-7 .57 .8
** Gravity priming pressure
Height BaseModel Lowered Raised Dimensions
in. / cm in. / cm in. / mm
2718*42.5 50.25 22.25 x 22.25108 128 600 x 600
8327489 89 26 x 26226 226 700 x 700
271973 110.5 12.5 x 14
185.4 280.7 317.5 x 355.5
1735 66.125 103 24 x 36167.6 261.6 600 x 1000
176566.125 103 24 x 36167.6 261.6 600 x 1000
Note: For follower range of materials other than standard Buna-N, contactLincoln Industrial Technical Services.
*Model 83943 portability kit is available for Model 2718. Includes axle and wheels.
Model 2719
Model 83274
Model 2718
Model 1735
Model 1765
Note: Units show pumps for illustrative purposes only. Order pump separately.
Back to Main Menu
8/10/2019 Industrial Pumping
21/59
Industrial Pumping EquipmentPileDriverIII Mounting Accessories
20
Model 83727 Standpipe Assembly
Mounts PileDriver III pump on floor to accept suction line from bulk tank.
Model Inlet Height Diameter
83727 3" NPTF 7" / 190 mm 8" / 200mm
Chimeless Drum KitsBecause some materials are supplied in straight sided or chimeless drums,
Lincoln has developed hold-down kits which facilitate follower and pump
extraction from these drums. Kits are available as follows:
Kit No. For Model
84167 83274
84503 1735
Model 84722 Series III Air Motor Exhaust Adapter
Replaces standard muffler. Converts exhaust port to " NPT female thread.
Model 84723 Series III Air Motor Cover Panel Kit
Metal cover fits over tie rods. Encloses moving plunger rod.
Low Level Air Cutoff KitsShuts air off when drum is empty. Prevents pump damage and introduction of air
into supply line. " NPT female connections.
Air Line Kits for Primers
Includes filter-lubricator-regulator-gauge, bracket and fittings for models 2719,
1735, 1765 and 83274.
Model For Primer
83811 8327483970 2719
84143 1735, 1765
Model Description
84144 " Air Line Kit
84141 " Air Line Kit
Model 83727
Model 84167
Model 83811
Model 85387-8Included in 84144 Kit
Model 84723
Back to Main Menu
8/10/2019 Industrial Pumping
22/5921
Industrial Pumping EquipmentMagna-Ram Four Post Pressure Primer
300 Gallon Pressure Primerfor Central Feed of High-
Volume Applications Powerful four-post design
Replaceable air cylinders
Positive vent mechanism
Cast aluminum follower: twin grooves, twin
seals, flat surface
Built-in crossover for dual primer applications
Low level warning
Empty drum automatic pump shut-off
Wide range pump capability
More compact envelope than
competitive models
Accommodates two PileDriver III pumps
Max. AirPriming Pressure Follower Envelope Envelope
* ModelPressure
@70 psi @100 psi Weight Diameter Size Lowered Size Raised
5 bar 7 bar lbs / kgs in. / m in. / m in. / m
1785 100 psi 9 psi 13 psi 4000 42 65" x 51" x 84" 65" x 51" x 141"
1786 7 bar .63 kg/cm2 .91 kg/cm2 1819 1.08 1.7m x 1.3m x 2.1m 1.7m x 1.3m x 3.6m
* Model 1785 has left-hand controls. Model 1786 has right-hand controls.Note:A minimum 14 ft. (4.3 m) ceiling clearance is recommended.
Note: Pumps shown for illustrative purpose only. Order pumps separately.
Back to Main Menu
8/10/2019 Industrial Pumping
23/59
Industrial Pumping EquipmentHydro-PowerMaster
22
Hydraulic Motor for PowerMaster IIIand PileDriver III Pump Tubes Safe to use where electric or pneumatic motors may be hazardous.
Virtually eliminates concerns about air supply condition and exhaust emissions.
Efficiently generates high material pressure and flow rate with minimum
hydraulic power consumption.
Few internal moving parts. No mechanical linkages or solenoids to fail
or wear out.
A completely internal changeover circuit requires no external signal for
reciprocating action.
A balanced cylinder design eliminates the need for separate up and down
stroke adjustments.
All key components are machined from steel or aluminum to ensure long
service life in the toughest applications. Hydro-PowerMaster was designed and is manufactured under the strict
conditions of an ISO 9001 registered quality system.
Cylinder Piston Stroke Hydraulic Hydraulic
Model Diameter Rod Dia. Length Fluid Fluid
in. / cm in. / cm in. / cm Inlet Outlet
85300 2 / 5 1/ 3.5 6 / 15 SAE 8 female SAE 10 female
Hydraulic Hydraulic Maximum
Operating Operating Fluid Flow Recommended Wetted
Pressure Range Temperature Consumption Continuous Part
psi / bar Range Rate Speed Materials
steel, aluminum
300 to 1500 -30F to 200F18.8 cu. in./cycle
75 cycles/minute bronze, Nitrile,
20.4 to 103 -34C to 93Cor
Teflon1 gallon/12 cyclespolyurethane
Model 85300
Back to Main Menu
8/10/2019 Industrial Pumping
24/5923
Industrial Pumping EquipmentHydro-PowerMaster
PowerMaster III Hydraulic Powered Pumps(includes Hydraulic Motor and Pump Tube)
Max. MaximumMaterial Hydraulic Delivery Max. Free Del.
Pump Nominal Drum Outlet Inlet Pressure Pressure @75 Cycles/Min.
Model Tube Ratio Size NPTF psi / bar* psi / bar Gallons / Liters2501 84985
2501-7 84983 55 gal
2501-8 84982
2501-9 84981 1.5:1 2250 / 155 3.9 / 14.6
2505 84984 16 gal
2514 84986Stub
2514-9 84987
2573 849762.5:1
55 gal 1500 / 1033750 / 258 2.2 / 8.2
2575 84977 16 gal
2574 849784:1
55 gal6000 / 412 1.5 / 5.7
2576 84979 16 gal "
2502 849913:1
55 gal4500 / 310 2.0 / 7.5
2506 84992 16 gal
2503 849934.5:1
55 gal1.2 / 4.5
2507 84994 16 gal7500 / 317
2510 849955:1
55 gal1250 / 86 1.0 / 3.7
2511 84996 16 gal
2504 849977:1
55 gal850 / 58 7650 / 527 0.7 / 2.6
2508 84998 16 gal
See PowerMaster III section for pump tube specifications, mounting devices and accessories.*Caution: Do not exceed maximum hydraulic inlet pressure listed for each motor/pump tube combination.
See PileDriver III section for pump tube specifications, mounting devices and accessories.*Caution: Do not exceed maximum hydraulic inlet pressure listed for each motor/pump tube combination.
PileDriver III Hydraulic Powered Pumps(includes Hydraulic Motor and Pump Tube)
Max. MaximumMaterial Hydraulic Delivery Max. Free Del.
Pump Nominal Outlet Inlet Pressure Pressure @75 Cycles/Min.Model Tube Ratio NPTF psi / bar* psi / bar Gallons / Liters
2567 84900 0.8:1 1200 / 83 7.1 / 27.0
2565 84901 1:1 1500 / 103 5.5 / 20.8
2564 84902 1.5:1 2250 / 155 3.9 / 14.9
2566 84904 1:1 1" 1500 / 103 1500 / 103 5.8 / 22.0
2568 849210.4:1 600 / 41
14.3 / 54.0
2569 84922 14.9 / 56.5
2570 84923 0.2:1 300 / 21 27.6 / 104.5
Model 2567
Model 2501
Back to Main Menu
8/10/2019 Industrial Pumping
25/59
8/10/2019 Industrial Pumping
26/5925
Industrial Pumping EquipmentSystem Accessories
High Pressure Control Valves
Ideal for controlling flow of materials in higher pressure transfer systems and
extrusion systems.
Max. InletInlet OutletModel Pressure
Size Size
Extension Features/BenefitsOptions/Kits
psi / bar
Accessories
" " Trigger latch reduces 91935 carboloy85905 5000 / 345 NPTF NPTF Optional operator fatigue during seat for abrasive
continuous use materials
Slim, lightweight designw/ adjustable trigger
83586 " spring for precise, easy
NPTF operation. The PalmGun has Tungsten 83990 Teflon
5000 / 345 " 2" rigid with Carbide needle and seat u-cup packing
NPTF "orifice Same as 83586 except has and retainer
hardened steel needle and83587 Fixed seat located in tip for drip
control
Heavy duty machined steel 66001 Ball 12071construction for high seat for high volumeviscosity, high pressure, flow. Max. pressureextreme service limited to 2000 psi/
81495 10,000 / 680 " " Optional applications 138 bar
NPTF NPTF 69133, 92168 T.C.Ball & Seat forabrasive materialapplications
Nozzles and ExtensionsNozzles
Model Orifice - in. / mm Inlet Size Length - in. / mm
68874 Brush " NPT Female 1 / 25.4
14237 / 2.4 " NPT Male 1/ 48
102622 / 1.2 " NPT Female 1/ 38
5803 / .8 " NPT Female 2/ 70
11196 / 1.6 " NPT Female 1/ 29
14464 / 3.2 " NPT Male 1/ 44
Extensions " NPT Male
Model Length - in. / mm
62028 6 / 15062061 12 / 300
62117 18 / 450
Model 85905
Model 83586
Model 102622
Model 68874
Model 5803
Back to Main Menu
8/10/2019 Industrial Pumping
27/59
Industrial Pumping EquipmentSystem Accessories
26
SwivelsDesigned for use between the material hose and control valve to give the operator
more flexibility and mobility and to reduce fatigue.
Model Style ThreadsMax. Working Pressure
psi / bar81728 Straight " NPT Male x " NPT Male
82071 Straight "-27 NPT Male x " NPT Male
82072 Straight " NPT Male x " NPT Male 6400
82087 90 " NPT Male x " NPT Male 435
81729 Universal " NPT Male x " NPT Male
82073 Universal " NPT Male x " NPT Male
Material Pressure Gauges
Model Pressure Connection RemarksRange
0-2000 psi " NPT2"/65mm dial, black steel case & ring,
666890-140 kg/cm2 Male Bottom
bronze bushed movement & frontrecalibration with stabilizer in shank.
Same as 66689 except dual needles.
689460-2000 psi " NPT Red needle indicates maximum pressure
0-140 kg/cm2 Male Bottom recorded. Black needle indicates actualpressure being developed.
698270-3000 psi " NPT 2"/65mm dial, black steel case,
0-210 kg/cm2 Male Back glass filled. Nylon movement.
698440-3000 psi " NPT Same as 69827 except
0-210 kg/cm2 Male Bottom bronze bushed movement.
ModelPressure Connection RemarksRange
661110-5000 psi " NPT 3"/75mm dial, glass filled
0-350 kg/cm2 Male Bottom nylon movement.
699100-6000 psi " NPT 2"/65mm dial, black steel case
0-420 kg/cm2 Male Back and plain movement.
2"/65mm dial, black steel case & plain
0-5000 psi " NPTmovement with dual needles. Red needle
69039 0-350 kg/cm2 Male Bottomindicates maximum pressure recorded,black needle indicates actual pressurebeing developed.
66050
0-10000 psi " NPT 3"/75mm dial, black steel case and
0-700 kg/cm2 Male Bottom bronze bushed movement.
Model 66689
Model 66111
Model 81728
Model 82072
Important Note: For lubricant use only. Not recommended for abrasive or corrosive materials.
Important Note: For lubricant use only. Not recommended for abrasive or corrosive materials.
Back to Main Menu
8/10/2019 Industrial Pumping
28/5927
Industrial Pumping EquipmentAir Operated Ejectors
Operating Max. Output Dimensions Air Inlet Matl MatlModel Ratio Air Priming per
A BNPT Inlet NPT Outlet
Pressure Pressure Cycle Female Female Female
83664 27:180-100 psi 1,000 psi .005-.045in3 11" 4"
" " "5.5-7 bar 68 bar .08-.74cc 286mm 102mm
85250 35:1100 psi 1,500 psi .015-.200in3 13" 3"
" " "7 bar 102 bar .253.3cc 337mm 98mm
84564 36:1100 psi 2,000 psi .1-1.0in3 20" 5"
" " "7 bar 138 bar 1.6-16cc 522mm 133mm
84540 35:1100 psi 2,000 psi .5-2.5in3 21" 8"
" " "7 bar 138 bar 8-41cc 536mm 213mm
Designed to be combined with PowerMaster or PileDriver pumping systems to
dispense measured shots of mastics, epoxies, sealants, greases and other viscous
materials. The ejectors are true positive displacement measuring devices which
accurately dispense material onto the work piece.
Positive displacement measuring/dispensing Steel plunger & body assembly
Adjustable plunger stop
High air/material ratio
Maintain extreme accuracy and repeatability, even where temperature,
viscosity and material/air supply pressure are variable. (Repeatability
suffers with competitive timed metering systems as the variables change.)
Displacement volume can be adjusted
High viscosity capability
High speed capability
Model 84540
Model 84564
Model 85250
Model 83664
Back to Main Menu
8/10/2019 Industrial Pumping
29/59
Minimum supply pressure 500 psi (35 bar).
Industrial Pumping EquipmentMeasuring Valves
28
Max. Matl. Output Per Cycle Dimensions Matl.Supply Press. in. / mm Inlet /
Model Description psi bar cu. in. cc fl. oz. A B Outlet
81914 With 4-way valve750 52 7.5-86 123-1410 4-46
19 15/389 " NPT
81911 Without 4-way valve 506 5/127
83232* Requires 4-way valve 1000 68 0-34.7 0-569 0-18.5 32 / 813 5/ 140 1" NPTF
81741 Require 4-way valves. 0-7.5 0-123 0-4 13 / 330
82232 All models are the5000 340 7.5-15 123-246 4-8
16 4 "same except for 424 113 NPTF
82233 output and length.15-22.5 246-369 8-12
20517.5
Designed to be combined with PowerMaster or PileDriver pumping systems to dispenseaccurate volumes of adhesives, sealants, plastisols, lubricants, and other medium tohigh viscosity fluids. These positive displacements valves address the following applications
Product packaging (pump material from 400 lb. drum to fill 16 oz. paper cartridges)
Process fill (vinyl plastisol into product molds)
Product fill (measure fluid into gear boxes, drives)All Lincoln Measuring Valves feature:
Positive displacement piston design
Adjustable piston stops
Horizontal or vertical mounting capability
One moving part
With these benefits:
Accuracy and repeatability that cannot be matched by other measuring systemssuch as timed flow
Capacity to fine tune and lock in output volume
Reliability
Long component life
Max. Material Max. Material Material Air DimensionsModel Supply Pressure Operating Inlet NPT Outlet NPT Inlet in. / mm
psi bar Air Press. Female Female A B
81740 Manual 7 8
5000 340 " NPTF " NPTF184 208
84205100 psi
" NPTF8 3
7 bar 203 95
* Index head permits 10 adjustable outputs.
Non-Drip Nozzle Model 82896Recommended for use with models 81914 and 83232. Provides positive shut-off
of measured fluids. Inlet " NPT(F).
Manual Measuring ValvesManual High Pressure Measuring Valves include handle for manual (hand, foot orknee) operation, or can be actuated with an air cylinder.
Max. Matl.Output Per Cycle
DimensionsMatl. Matl.Supply Press. in. / mmInlet OutletModel psi bar cu. in. cc fl. oz. A B
84523 5000 340 .081-1.8 1.3-30 .045-1 14/376 4 /101 " NPTF " NPTF
284523 5000 340 .022-.288 .36-4.7 .012-.16 8/208 4 /101 " NPTF " NPTF
Model 81914
Model 81741
Model 81740
Model 83232
Model 84523
Model 82896
Back to Main Menu
8/10/2019 Industrial Pumping
30/5929
Industrial Pumping EquipmentTransfer Pumps
Transfer SystemsPump material from one container or reservoir to another. Typical applications
involve high volume transfer of low to medium viscosity fluids.
Maximum Maximum Pump
Model Container Ratio Discharge Delivery Tube Packings PumpSize Pressure GPM/ Construction Outletpsi / bar LPM
837775 gal. 3:1 600 / 41 2.5 / 9.5 Carbon Steel Teflon " NPTF
416
84150-9 5 gal.
84080-9 55 gal. 3:1 375 / 26 2.5 / 9.5 316 Stainless Teflon " NPTF
84145-9 BulkSteel
82230*16 gal. or
22 / 82 Carbon Steel Leather "-11-"
55 gal.1:1 150 / 10
A.N.
16 gal., 55Tube-Carbon
84829gal. or Bulk
16.5 / 66 Outlet Body Buna-N " NPTF
Valox
Model Special Features
83777 Pail cover
416Pail cover, 10 (3 m) " (13mm) I.D. Hose, air coupler and nipple,non-drip control valve.
84150-9 Pail cover with return inlet for recirculation.
84080-9 2" bung bushing and " NPTF return inlet.
84145-9 Wall mount kit, and suction hose check.1
82230Built-in air control valve for throttling air supply to pump to control material output.
Operates on pressure as low as 20 psi (1.4 bar). Self adjusting bung bushing.
84829Light weight and efficient. The pump will stall against pressure and can be controlled
by a fluid dispensing valve.
Notes:1. Suction hose or tube (not included) should be compatible with pumped product and not exceed
10' (3 m) long nor less than " (19 mm) I.D.
2. 91172 transfer pump hose. 8 feet (2.5 m) " (19 mm) I.D. standard hose and curved spout, with
inlet threaded " - 11 - " A.N. to fit outlet of 82230 pump.3. For transfer systems involving long supply lines, PowerMaster III Stub Pumps are available.
Consult Lincoln Industrial for your application needs.
* Accessories for 82230: 82715-Teflon Kit; 91172-Hose & Nozzle2
Model 416
Model 84080
Model 84145
Model 84150
Model 82230
Back to Main Menu
8/10/2019 Industrial Pumping
31/59
Industrial Pumping EquipmentDiaphragm Pumps
30
" Air-Operated Double Diaphragm PumpsFour models available in plastic and aluminum.
Materials of Construction
Dimensions
Plastic Aluminum
Inlet/Capacity
SolidsHead
Inlet/Capacity
SolidsHead
Outlet Handling Outlet Handling
" 0-14 GPM Up to Up to 100 psi or " 0-16 GPM Up to Up to 100 psi or
NPTF/ 0-52 LPM "/2mm 230 ft. of water NPTF/ 0-52 LPM "/2mm 230 ft. of water13mm 7 kg/cm2 or 70 m 13mm 7 kg/cm2 or 70 m
Material Plastic Aluminum
Model 84842 84843 84840 84841
Manifold PP PP A A
Outer Chamber PP PP A A
Outer Diaphragm Plate PP PP A A
Inner Diaphragm Plate PP PP
Intermediate Housing PP* PP* N N
Diaphragm Rod 416SS 416SS 416SS 416SSHardware 301/302SS 301/302SS PS PS
Clamps SS SS
Valve Seat PP PP A A
Diaphragm H H/T H N/T
Ball Valve Material H T H T
Air Valve PP* PP* N N
Cap PP* PP* N N
Sealing Rings B T
Shipping Weight - lbs./kg 9 / 4 9 / 4 14 / 6.3 14 / 6.3
Meanings of Abbreviations:PP = Polypropylene H = Hytrel A = 380 Aluminum
PS = Plated Steel N = Nylon B = Buna-NSS = Stainless Steel H/T = Hytrel Backup/Teflon OverlayT = Teflon N/T = NEO. Backup/Teflon Overlay
* Designates Glass FilledHytrel and Teflon are registered trade names of E.I. duPont
Model 84840
Model 84842
Plastic Pump Aluminum Pump
Back to Main Menu
8/10/2019 Industrial Pumping
32/5931
Industrial Pumping EquipmentDiaphragm Pumps
1" Air-Operated Double Diaphragm PumpsThree models available in aluminum.
Materials of Construction
Aluminum
Inlet/Capacity
SolidsHead
Outlet Handling
1" NPTF/ 0-54 GPM Up to Up to 125 psi or
25mm 0-200 LPM "/6mm 289 ft. of water8.8 kg/cm2 or 88 m
Material Aluminum
Model 84852 84853 84855
Manifold A A A
Outer Chamber A A A
Outer Diaphragm Plate A A A
Intermediate Housing N N N
Diaphragm Rod 416SS 416SS 416SS
Hardware PS PS PSClamps SS SS SS
Valve Seat A A A
Diaphragm H N/T B
Ball Valve Material H T B
Air Valve N N N
Cap N N N
Sealing Rings B T B
Shipping Weight - lbs./kg 30 / 13.6 30 / 13.6 30 / 13.6
Meanings of Abbreviations:PS = Plated Steel H = Hytrel A = 380 AluminumSS = Stainless Steel N = Nylon B = Buna-NT = Teflon N/T = NEO. Backup/Teflon Overlay
* Designates Glass FilledHytrel and Teflon are registered trade names of E.I. duPont
Dimensions
Model 84852
Back to Main Menu
8/10/2019 Industrial Pumping
33/59
Industrial Pumping EquipmentDiaphragm Pumps
32
1" Air-Operated Double Diaphragm PumpsOne model available in aluminum.
Materials of Construction
Aluminum/Stainless Steel
Inlet/Capacity
SolidsHead
Outlet Handling1" NPTF/ 0-115 GPM Up to Up to 125 psi or
38mm 0-435 LPM " / 6mm 289 ft. of water8.8 kg/cm2 or 88 m
Material Aluminum
Model 84862
Manifold A
Outer Chamber A
Outer Diaphragm Plate A
Intermediate Housing N
Diaphragm Rod 416SS
Hardware PS
Clamps SS
Diaphragm B
Ball Valve Material B
Air Valve N
Cap N
Sealing Rings B
Shipping Weight - lbs./kg 31 / 14
Meanings of Abbreviations:PS = Plated Steel A = 380 AluminumSS = Stainless Steel B = Buna-NN = Nylon
Model 84862
Dimensions
Back to Main Menu
8/10/2019 Industrial Pumping
34/5933
Industrial Pumping EquipmentDiaphragm Pumps
2" Air-Operated Double Diaphragm Pumps
Materials of Construction
Aluminum
Inlet/Capacity
SolidsHead
Outlet Handling
2" NPTF/ 0-135 GPM Up to Up to 125 psi or50mm 0-510 LPM "/6mm 289 ft. of water
8.8 kg/cm2 or 88 m
Material Aluminum
Model 84870
Manifold AL
Outer Chamber AL
Inner Chamber PP
Outer Diaphragm Plate AL
Inner Diaphragm Plate AL
Intermediate Housing PP
Diaphragm Rod 416SSValve Seat B
Hardware PS
Diaphragm B
Ball Valve Material B
Air Valve PP
Cap AL
Shipping Weight - lbs./kg 67 / 30.3
Meanings of Abbreviations:AL = Aluminum SS = Stainless SteelPP = Polypropylene B = Buna-NPS = Plated Steel
Model 84870
Dimensions
Back to Main Menu
8/10/2019 Industrial Pumping
35/59
Industrial Pumping EquipmentDiaphragm Pump Accessories
34
Drum Pump Adapter Kit Model 240994Specially made for the 84842 and 84843 Diaphragm pumps. An easy way to
convert the 1/2 inch plastic pump to a drum application. The kit includes a pipe
assembly made of PVC plastic and all the hardware you need.
Dual Ported Manifold Model 240993Designed to be used to replace the existing manifold on 1/2 inch Diaphragm
pumps, models 84840 and 84841.
Dual Ported Manifold Model 240989Designed to be used to replace the existing manifold on 1/2 inch Diaphragm
pumps, models 84842 and 84843.
Used Fluid Transfer System/AccessoriesModels 84815, 84816 and 84817
Model 84815 Overfill Warning Valve
The air supply to the evacuation pump is routed through this valve which threads
into a standard 2" NPT above ground tank or drum opening. When the used fluid
in the tank reaches a near full level the float activates the ball cock, shutting off the
air supply to the pump. Air is then diverted to a whistle to give an audible warning
that the tank is near capacity.
Model 84816 Reversing Valve
This valve is used in systems required to evacuate used fluids as well as to emptythe tank, using a common pump. Model 84816 is a four port, two position valve
with a full 1" port size to allow up to 30 GPM discharge flow.
Model 84817 Wall Mount Bracket
Universal wall mount bracket for all 1/2" and 1" Lincoln Industrial air-operated
double diaphragm pumps. Mounting hardware included.
Fits 2" NPT Tank/Drum
Air Air Air OverallInlet Outlet Alarm Height
1" NPTF 1" NPTF Included 20" / 516mm
Four Port, Two Position
Flow Rate Discharge Max. Pressure Port Size Body Construction Seals
8 GPM 1-30 GPM 150 psi1" NPTF 6061 T-6 Aluminum Viton30 LPM 3.8113LPM 10.5 bar
DimensionsHeight Width Depth
12" / 324mm 14" / 368mm 13" / 330mm
Model 240993
Model 240989
Model 84815
Model 84816
Model 84817
Model240994
Back to Main Menu
8/10/2019 Industrial Pumping
36/5935
Industrial Pumping EquipmentOther Pumps
Volume Master PumpsFor high volume transfer of fluids such as hydraulic oil, motor oil, gear lubricant,
automatic transmission fluid, etc., these pumps deliver up to 20 gallons (75 liters)
per minute for continuous operation.
Max. Delivery Avg. Output Piston Gland Pump Matl. Outletgal/min cu. in./cycleSeals Seals Type NPTF(F)
l/min cc/cycle
20 64 Teflon & Viton & Cone 1"75 1409 Buna-N Teflon
Model PumpAir Motor Max. Discharge
Air Inlet
No. RatioSize Pressure
NPTF(F)in. / mm psi / bar
594 :1 2/ 65 133 / 9 "
595* 1:1 3 / 75 50 / 3 "
596 1:1 3 / 75 200 / 14 "
597 2:1 4/ 110 400 / 28 "
Notes:Volume Master pumps have 2" NPTF female inlets to thread directly to 2" male stand pipes, orthey can be flanged mounted to a tank. Use model 84164 wall mount bracket kit and 84165suction kit for wall mounting Volume Master pumps.*Model 595 is equipped with a relief valve to bypass pressures above 50 psi (3 bar) back into thecontainer. It is U.L. Listed for use with flammable petroleum products.
Ultra High Pressure Pumps
Designed specifically for oil well services such as wireline and plug valve applica-
tions. In wireline applications, these pumps are used to seal against the well-head
pressure as the well is being logged or perforated. In plug valve applications, they
are used to pump heavy grease into the valve or Christmas tree valves to sealany gas leaks.
Max. Delivery Avg. OutputPiston Gland
Pump TypeMatl. Outlet
gal/min cu. in./cyclePacking Packing
B BallNPTF(F)
l/min cc/cycle S Shovel
Molybdenum
.42 1.4 Bushing & DisulfideS "1.6 23 Plunger Urethane
Stacked V
Model DrumPump Air Motor
Max. Discharge Air InletNo. Size
Ratio SizePressure NPTF(F)in. / mm psi / bar
2360 55 gal. 140:1 6 / 150 14000 / 952 "2361 16 gal.
Model 594
Model 595
Model 2360
Back to Main Menu
8/10/2019 Industrial Pumping
37/59
Industrial Pumping EquipmentOther Pumps
36
Booster Pump TubeDesigned to ensure proper material supply line pressure when material is pumped
long distances. The booster pump tube powered by one of four PowerMaster air
motors is installed directly in the supply line. By regulating air pressure, the boost-
er pump picks up low material pressure at the pump inlet and boosts it back up
to the desired pressure in the line. The distance the material is pumped from thestorage tank, plus pipe size and material pumped, determines the spacing of one
or more booster pumps in the system.
Max. Delivery Gland Materialgal/min Packing Inlet & Outlet
l/min NPTF(M)
1 Polyurethane3"
3.8 U-cup
Booster AirPump
Air Motor Max. DischargeAir InletPump Motor
RatioSize Pressure
NPTF(F)Model Model in. / mm psi / bar
82737 7.5:1 2/ 65 1500 / 102 "
8349682895 10.5:1 3 / 75 2100 / 142.8 "
82730 21.5:1 4/ 110 4300 / 292.4 "
82736 43:1 6 / 150 4300 / 292.4 "
Model 83496
Back to Main Menu
8/10/2019 Industrial Pumping
38/5937
Industrial Pumping EquipmentPump Packages
Dispense Pak #1 Model 85801For 5 gallon pail, single gun applications not exceeding 26 cu. in. (426 cc) per minu
Air Material Control Valve Control ValveInlet Outlet Inlet Outlet
" NPTF " NPTF " NPTF " NPTF
Extrusion Volume Per Linear Foot (Beads)
Diameter-in. / mm cu. in. / cc Gallons / Liters Ft. per Gal.
" / 3.2 .1473 / 2.41 .00064 / .0024 1565
" / 6.35 .5891 / 9.65 .00255 / .0096 392
" / 9.525 1.3562 / 22.2 .00574 / .021 174
" / 12.7 2.3562 / 38.6 .01020 / .038 98
" / 15.875 3.8612 / 63.3 .01592 / .060 63
" / 19.05 5.3005 / 86.8 .02295 / .086 44
Dispense Pak #2 Model 85802For 5 gallon pail, single or multiple gun applications not exceeding 100 cu. in.
(1639 cc) per minute.
Air Material Control Valve Control ValveInlet Outlet Inlet Outlet
" NPTF " NPTF " NPTF " NPTF
Material: General Purpose RTV Silicone
Viscosity: 600,000 CPS, Brookfield #7 Spindle 24 RPM
Air Pressure to Pump Air Pressure to Ram Output/Minutepsi / bar psi / bar cu. in. / cc
50 / 3.4 100 / 6.8 42.2 / 691.6
75 / 5.1 100 / 6.8 81.6 / 1337.4
100 / 6.8 100 / 6.8 126.8 / 2078.2
Extrusion Volume Per Linear Foot (Beads)
Diameter-in. / mm cu. in. / cc Gallons / Liters Ft. per Gal.
" / 3.2 .1473 / 2.41 .00064 / .0024 1565
" / 6.35 .5891 / 9.65 .00255 / .0096 392
" / 9.525 1.3562 / 22.2 .00574 / .021 174
" / 12.7 2.3562 / 38.6 .01020 / .038 98
" / 15.875 3.8612 / 63.3 .01592 / .060 63
" / 19.05 5.3005 / 86.8 .02295 / .086 44
Model 85801
Model 85802
Note:Dispense Pak includes 20 ft. (6 m) drop line, swivel and control valve. Header piping, connections,valving and additional drop lines are to be ordered separately.
For additional nozzle selections refer to page 25.
Back to Main Menu
8/10/2019 Industrial Pumping
39/59
Industrial Pumping EquipmentPump Packages
38
Air Material Control Valve Control ValveInlet Outlet Inlet Outlet
" NPTF 1" NPTF " NPTF " NPTF
Material: General Purpose RTV Silicone
Viscosity: 600,000 CPS, Brookfield #7 Spindle 24 RPM
Air Pressure to Pump Air Pressure to Ram Output/Minutepsi / bar psi / bar cu. in. / cc
50 / 3.4 100 / 6.8 68.0 / 1114.5
75 / 5.1 100 / 6.8 146.8 / 2406.0
100 / 6.8 100 / 6.8 230.1 / 3771.3
Extrusion Volume Per Linear Foot (Beads)
Diameter-in. / mm cu. in. / cc Gallons / Liters Ft. per Gal.
" / 3.2 .1473 / 2.41 .00064 / .0024 1565
" / 6.35 .5891 / 9.65 .00255 / .0096 392
" / 9.525 1.3562 / 22.2 .00574 / .021 174
" / 12.7 2.3562 / 38.6 .01020 / .038 98
" / 15.875 3.8612 / 63.3 .01592 / .060 63
" / 19.05 5.3005 / 86.8 .02295 / .086 44
Dispense Pak #4 Model 85804
For 55 gallon drum applications to multiple work stations through header system
not exceeding 1000 cu. in. (16390 cc)per min.
Air Material Control Valve Control ValveInlet Outlet Inlet Outlet
" NPTF 1" NPTF " NPTF " NPTF
Extrusion Volume Per Linear Foot (Beads)
Diameter-in. / mm cu. in. / cc Gallons / Liters Ft. per Gal.
" / 3.2 .1473 / 2.41 .00064 / .0024 1565
" / 6.35 .5891 / 9.65 .00255 / .0096 392
" / 9.525 1.3562 / 22.2 .00574 / .021 174
" / 12.7 2.3562 / 38.6 .01020 / .038 98
" / 15.875 3.8612 / 63.3 .01592 / .060 63
" / 19.05 5.3005 / 86.8 .02295 / .086 44
Recommended Pipe Sizes - Material HeaderPipe: Seamless steel sch. 80 ASTM-A53, or ASTM-A105Fittings: 3000 lb forged steel
Length I.D. (Min)
0-50' / 0-15 m 1.25" / 32 mm
50-100' / 15-30 m 1.5" / 38 mm
100-150' / 30-16 m 2" / 51 mm
Material: General Purpose RTV Silicone
Viscosity: 600,000 CPS, Brookfield #7 Spindle 24 RPM
Pump Output: 1015 cu. in./minute
Note:Dispense Pak includes 20 ft. (6 m)drop line, swivel and control valve.Header piping, connections, valvingand additional drop lines are to beordered separately.
Dispense Pak #3 Model 85803For 5 gallon pail, multiple gun applications not exceeding 200 in.3 (3278 cc) per minute
Model 85803
Model 85804
For additional nozzle selections refer to page 25.
Back to Main Menu
8/10/2019 Industrial Pumping
40/5939
Industrial Pumping EquipmentPump Packages
Ink Systems Model 1317MDPThis manual transfer package features 55 gallon band type drum dolly. The
system dispenses up to five ounces (148 cc) per stroke. The heavy duty pump
has a long pump handle for leverage and ease of pumping.
Model Pump Drum Max. Delivery Max. Discharge Hose StandardNo. Ratio Size gal./min. Pressure Description Accessoriesl./min. psi / bar
8' / 2.5 m Drum cover,1317
55 gal. " / 19 mm follower
MDP ID w/curved platespout
Construction Adhesives, Sealants& Caulking SystemsModel 989MD
An economical package for use with original five gallon pails. Includes pail cover
with clamp screws and follower plate. Longer lengths of hose are available.
Model 987MD
Ideal for pumping construction materials from original five gallon pails. Or for use
with 60 pound, self-contained, dust-proof/leak-proof bulk container. Follower plate
is recommended. Order separately Model 84775.
Note: Both 987MD and 989MD can be made more portable with the model 674 Hand Truck;
order separately.
Model 1725Portable package designed for original five gallon pails. Portable pressure primer
includes reversible steel cleats for securing both straight-sided and tapered pails.
Follower with wiper blade cleans sides of pail as material is dispensed. Air assist-
ed follower extraction.
Model Pump Drum Max. Del. Max. Dischrg. Hose StandardNo. Ratio Size gal./min. Pressure Description Accessories
l./min. psi / bar
6' / 1.8m Air regulator, gauge,989MD 50:1 " / 6mm universal swivel,
ID High press. control valve w/ nozzle0.12 / 0.45
60 lb. Bulk10' / 3m metal container,
987MD 50:1 5 gal. 5000 / 340 " / 6mm air regulator, gauge,ID High press. high pressure swivels,
control valve w/ nozzle
1725 25:1 0.25 / 0.95 NA NA
* Hose rated to 1500 psi / 102 bar.
Model 1725
Model 987MD
Model 989MD
Model 1317MDP
Note: Order hose, flow gun, etc. separately.
Back to Main Menu
8/10/2019 Industrial Pumping
41/59
Industrial Pumping EquipmentPump Packages
40
Dimensions Output Power Requirements Lubricant Capacity
36" x 28" x 17" 6 oz. / min. 115/230 volt 30 lbs.921 x 711 x 445 mm 177.6 cc / min 5.4 / 2.7 amp 13.6 kg.
Electric Lubriguns
Model 251
For dispensing oils and light greases, NLGI #1. Includes a weighted follower.
Model 252For dispensing heavy greases, NLGI #3. Includes a screw prime follower.
Model 251
Note: Both models include 7 ft. of 1/4" high pressure hose, 81387 universal swivel, and 740 controlvalve. Pressure switch is factory set to shut-off pump at 5,000 psi lubricant pressure and to startpump when pressure drops to 2,500 psi.
Back to Main Menu
8/10/2019 Industrial Pumping
42/5941
Industrial Pumping EquipmentInstallation Components
Material flows from the pump station to the point(s) of application through supply and drop lines. Pipe, hose and, in
some cases, tubing sizes used in the supply line should be selected based on system pressure drop calculations.
System pressure drop is related to the material viscosity, flow rate and size and length of the conduit selected.
Your Lincoln Industrial representative can assist you in proper selection of supply line and accessories based on your
system requirements.
Listed below is a simplified outline of the installation components offered. For a complete listing of products, pleaserefer to the Installation Components catalog.
TUBING
Hydraulic, Steel, Stainless Steel
and Nylon
Single and Multiple Tube
Clamps
Heavy Duty, Standard Duty,
Threaded Sleeve and Snap-On
Coupler Tube Fittings
Quicklinc Tubing Adapter
Zerk-Lock Grease Fitting
Adapters
Non-Metallic
PIPING
Seamless
Continuous Welded
Forged Fittings
Malleable Iron Fittings
316 Stainless Steel Pipe
and Fittings
Stainless Steel Fittings
Galvanized Pipe, Threaded Plug
and Fittings
ACCESSORIES
Supply, Feed and Bulk FeedLine Hose
Air Hose
Kits for Hose Repair
Heavy-Duty Air Line Quick
Disconnects
AIR CONTROL
AND ACCESSORIES
Manual Shut-Off Valves
Pressure Gauges
Lubricant Filters and Strainers
AIRCARE AIRPREPARATION SYSTEMS
Modular Air Line Filters,
Regulators and Lubricators
Integrated/Modular
Filter/Regulator with Gauge
Modular Air Line
Combination Units
High Capacity Air Line Filters,
Regulators and Lubricators
High Capacity Air LineCombination Units
Miniature Air Line
ComponentsAir Line Filter,
Regulator and Lubricator
Miniature Air Line
Combination Units
Modular Air Line Equipment
Accessories:
Lockout Valve, Quick Clamp,
Quick Clamp Wall Mounting
Bracket, Porting Block, QuickMount Pipe Adaptors, Manifold
Block, Pressure Switch, Panel
Nut, Wall Mount Bracket,
Tamper Resistant Cover
& Seal Wire
Air Line Equipment Accessories:
Wall Mount Bracket, High
Capacity; Mounting Bracket
and Nut, Miniature; Pressure
Gauges
PIPE FITTINGS
Reducing Bushings
Nipples
Couplings
Reducing Couplings
Street Ells
Tees
Crosses
Adapter Unions
Elbows
Pipe Fitting Adapters
Supply Line Swivels
Feed Line Swivels
Anchor and Junction Blocks
Back to Main Menu
8/10/2019 Industrial Pumping
43/59
Industrial Pumping EquipmentAirCare Air Preparation Systems
42
Modular Air Line Filters
Model Max. Air Operating Material of Element
No.Supply Temperature Construction Material Particle
psig / bar Range - F / C Body Bowl Size602104 0 to 150
Zinc Zinc* Sintered602106 250 -18 to 65 Polypro- 40602108 17 0 to 175
Aluminum Aluminum* pylene602109 -18 to 79
Model DrainPort Dimensions - in. / mm Weight
No. TypeSize lbs. / PTF A B C Dia. kg
602104 5.27 0.75 1.98 1.91 1.1
602106 Manual 134 19 50 48 0.5
602108
6.95 / 177 1.00 3.15 2.89 1.8
602109 Automatic 6.35 / 161 25 80 74 0.8
* Transparent nylon liquid level indicator lens.
Modular Air Line Regulators
ModelMax. Air Operating Material of Construction Secondary
No.Supply Temperature
Body Bonnet Valve Bottom(Gauge)
psig / bar Range - F / C Seals Plug Connections (in.)
602004
602005 0 to 150Zinc Acetal NPT (F)
602006 300 -18 to 65 BrassAcetal
602007 20 Nitrile
602008 0 to 175Aluminum Aluminum NPT (F)
602009 -18 to 79
ModelOutlet Press. Connections Dimensions - in. / mm Weight
No.Adj. Range NPT-Female Adjuster lbs. /
psig / bar (in.) A B C D kg
602004
4.0 / 102 T-Handle
602005 5 to 150 2.88 / 73 1.31 2.0 3.2 Knob 0.8
602006 0.3 to 4
4.0 / 102 33 50 83 T-Handle 0.4
602007 2.88 / 73 Knob
60200810 to 250 5.95
T-Handle0.7 to 16
151 1.69 3.15 5.1 1.77
6020095 to 150 5.0 43 80 130
Knob0.80
0.3 to 4 127
Back to Main Menu
8/10/2019 Industrial Pumping
44/5943
Industrial Pumping EquipmentAirCare Air Preparation Systems
Modular Air Line Lubricators
Model Max. Air Operating Material of Construction RecommendedNo.
Supply Temperature Sight feedLubricantspsig / bar Range - F / C Body Bowl Dome
602204 0 to 150Zinc Zinc*
. Misting type oil
602206 250 -18 to 65 Transp 50 to 200 SSU
60220817.2 0 to 175
Aluminum Aluminum*Nylon (ISO Grade 7 to 46)
-18 to 79 at 100F (38C)
Model ConnectionsBowl Dimensions - in. / mm Weight
No. NPT-FemaleCapacity lbs. /ozs. / ml A B C D kg
602204 2.0 5.27 1.63 1.98 1.91 1.1
602206 58 134 41 50 48 0.5
602208 7.0 6.95 2.12 3.15 2.89 1.6207 177 53 80 74 0.7
* Transparent nylon liquid level indicator lens.
* Transparent nylon liquid level indicator lens.
Integrated/Modular Filter/Regulator with GaugeCan be used with other AirCare Modular Components.
Model Max. Air Operating Element Outlet PressureNo. Supply Temperature Particle Adj. Range
psig / bar Range - F / C Size psig / bar
602134 0 to 150
602136 250 -18 to 6540 5 to 150602138 17 0.3 to 10 0.3 to 10
602142 -18 to 79
Model DrainPort Dimensions - in. / mm Weight
No. Type
Size lbs. /
PTF A B C D kg602134 5.27 2.89 1.98 3.29 1.2
602136 Manual 134 73 50 83 0.5
602138 6.95 4.98 3.15 5.10 2.6
602142 177 127 80 130 1.2
Modular Air Line Combination Units
Filter-Regulator with Gauge-Lubricator
ModelMax. Air Operating Element Outlet Pressure Lubricator
No.Supply Temperature Particle Adj. Range Bowl Capacity
psig / bar Range - F / C Size psig / bar ozs. / ml85387-4250
0 to 1505 to 150
2.0
85387-6 17-18 to 65 40 58
85387-8 0 to 175 / -18 to 790.3 to 10
7.0 / 207
Model DrainPort Dimensions - in. / mm Weight
No. TypeSize lbs. /PTF A B C kg
85387-4 5.27 1.63 6.46 3.3
85387-6 Manual 134 41 164 1.5
85387-8 6.95 / 177 2.12 / 53 10.52 / 267 6.2 / 2.8
Back to Main Menu
8/10/2019 Industrial Pumping
45/59
Industrial Pumping EquipmentAirCare Air Preparation Systems
44
* Transparent nylon liquid level indicator lens.
Modular Air Line Combination Units
Filter-Regulator with Gauge
ModelMax. Air Operating Element Outlet Pressure
No.Supply Temperature Particle Adj. Range
psig / bar Range - F / C Size psig / bar
85388-4250
0 to 1505 to 150
85388-6 -18 to 65 40
85388-817
0 to 175 / -18 to 790.3 to 10
Model DrainPort Dimensions - in. / mm Weight
No. TypeSize lbs. / PTF A B C kg
85388-4 5.27 1.31 4.22 2.1
85388-6 Manual 134 33 108 1.0
85388-8 6.95 / 177 1.69 / 43 6.84 / 174 4.2 / 2.0
* Transparent nylon liquid level indicator lens.
Modular Air Line Combination UnitsFilter-Lubricator
ModelMax. Air Operating Element Lubricator
No.Supply Temperature Particle Bowl Capacity
psig / bar Range - F / C Size ozs. / ml
85389-4250
0 to 150 2.0
85389-6 -18 to 65 40 58
85389-817
0 to 175 / -18 to 79 7.0 / 207
Model DrainPort Dimensions - in. / mm Weight
No. TypeSize lbs. / PTF A B C kg
85389-4 5.27 1.63 4.22 2.1
85389-6 Manual 134 41 50 1.0
85389-8 6.95 / 177 2.12 / 53 6.84 / 174 3.8 / 1.7
High Capacity Air Line Filters
Model Max. Air Operating Material of Element
No.Supply Temperature Construction Material Particle
psig / bar Range - F / C Body Bowl Size602112
Aluminum* Sintered602113 250 0 to 175
Aluminum w/ Pyrex bronze 50602116 17.2 -18 to 79sight glass
602117
Model DrainPort Dimensions - in. / mm Weight
No. TypeSize lbs. / PTF A B C Dia. kg
602112 Manual
10.44 / 265
602113 Automatic 10.06 / 256 1.25 4.75 5.52 4.1
602116 Manual1
10.44 / 265 32 121 140 1.9
602117 Automatic 10.06 / 256
* Pyrex liquid level indicator.
Back to Main Menu
8/10/2019 Industrial Pumping
46/5945
Industrial Pumping EquipmentAirCare Air Preparation Systems
High Capacity Air Line Regulators
ModelMax. Air Operating Material of Construction Secondary
No.Supply Temperature
Body Bonnet Valve Bottom(Gauge)
psig / bar Range - F / C Seals Plug Connections (in.)
602012
602013 300 0 to 175 Aluminum AluminumAluminumAluminum NPT (F)602016 20 -18 to 79 Nitrile
602017
ModelOutlet Press. Connections Dimensions - in. / mm Weight
No.Adj. Range NPT-Female Adjuster lbs. /psig / bar in. A B C D kg
602012 10 to 250 / 0.7 to 16
5.69 / 145 T-Handle
602013 5 to 150 / 0.3 to 10 4.71 / 120 2.38 4.25 2.38 Knob 2.5
602016 10 to 250 / 0.7 to 161
5.69 / 145 60 108 60 T-Handle 1.1
602017 5 to 150 / 0.3 to 10 4.71 / 120 Knob
High Capacity Air Line LubricatorsModel Max. Air Operating
Material of ConstructionRecommended
No.Supply Temperature Sight feed
Lubricantspsig / bar Range - F / C Body Bowl Dome
602212Misting type oil
250 0 to 175 Aluminum Aluminum* Transp. 50 to 200 SSU
60221617.2 -18 to 79 Nylon (ISO Grade 7 to 46)
at 100F (38C)
Model ConnectionsBowl Dimensions - in. / mm Weight
No. NPT-FemaleCapacity lbs. /ozs. / ml A B C Dia. kg
602212 32 10.24 2.22 4.50 5.52 3.6
602216 1 946 260 56 114 140 1.6
* Pyrex liquid level indicator.
* Pyrex liquid level indicator.
High Capacity Air Line Combination Units
High Capacity Filter-Regulator with Gauge-Lubricator
ModelMax. Air Operating Element Outlet Pressure Lubricator
No.Supply Temperature Particle Adj. Range Bowl Capacity
psig / bar Range - F / C Size psig / bar ozs. / ml
85387-12 250 0 to 175 5 to 125 32
85387-16 17 -18 to 7950
0.3 to 8.6 946
Model Drain Port Dimensions - in. / mm WeightNo. Type
Size lbs. /PTF A B C kg
85387-12Manual
10.44 2.22 14.75 10.6
85387-16 1 265 56 375 4.8
Back to Main Menu
8/10/2019 Industrial Pumping
47/59
Industrial Pumping EquipmentAirCare Air Preparation Systems
46
* Pyrex liquid level indicator.
High Capacity Air Line Combination Units
Filter-Regulator with Gauge
ModelMax. Air Operating Element Outlet Pressure
No.Supply Temperature Particle Adj. Range
psig / bar Range - F / C Size psig / bar
85388-12 250 0 to 17550
5 to 12585388-16 17 -18 to 79 0.3 to 8.6
Model DrainPort Dimensions - in. / mm Weight
No. TypeSize lbs. / PTF A B C Dia. kg
85388-12Manual
10.44 2.38 10 5.52 6.9
85388-16 1 265 60 254 140 3.1
* Pyrex liquid level indicator.
High Capacity Air Line Combination Units
Filter-Lubricator
ModelMax. Air Operating Element Lubricator
No.Supply Temperature Particle Bowl Capacity
psig / bar Range - F / C Size ozs. / ml
85389-12 250 0 to 17550
32
85389-16 17 -18 to 79 946
Model DrainPort Dimensions - in. / mm Weight
No. TypeSize lbs.PTF A B C Dia. kg
85389-12Manual
10.44 2.22 10.25 5.52 7.8
85389-16 1 265 56 260 140 3.5
Miniature Air Line ComponentsAir Line Filter
Model Max. Air Operating Material of Element
No.Supply Temperature Construction Material Particle
psig / bar Range - F / C Body Bowl Size
602103 150 0 to 125 ZincPolycar- Porous
10.3 -18 to 52 bonate Polypropylene 50
Model DrainPort Dimensions - in. / mm Weight
No. TypeSize lbs. / PTF A B C Dia. kg
602103 Manual 3.25 / 83 0.38 / 10 1.63 / 42 1.45 / 37 0.3 / 0.12
Back to Main Menu
8/10/2019 Industrial Pumping
48/59
8/10/2019 Industrial Pumping
49/59
Industrial Pumping EquipmentAirCare Air Preparation Systems
48
Miniature Air Line Combination Units
Filter-Lubricator
ModelMax. Air Operating Element Lubricator
No.Supply Temperature Particle Bowl Capacity
psig / bar Range - F / C Size ozs. / ml
85674 150 / 10.3 0 to 125 / -18 to 52 5 1.0 / 30
Modular Air Line Equipment AccessoriesLockout ValveInstall in-line or modular with other AirCare products to help conform to OSHA
Lockout Regulations. In the closed position, valves block inlet air flow and exhaustdownstream air.
ModelFor For Max. Operating
No.Modular In-Line Air Supply Temperatureuse with use with psig / bar Range-F / C
247770 " Modular "
247771 " Modular " 250 0 to 150
247772 " Modular " 17 -20 to 65
247773 " Modular "
Modular Air Line Equipment Accessories
Quick ClampUse with Modular Air Line Components to provide modular installation capability.
Flanges on the products slide into V grooves in the quick clamp. Two face-seal-
ing o-rings in the quick clamp provide an air tight connection when the clamp is
closed.
Model For Modular DimensionsNo. Sizes in. / mm
247782 " and " 1.50 / 38
247783 " and " 2.00 / 51
Modular Air Line Equipment AccessoriesQuick Clamp Wall Mounting Bracket
Use with quick clamp to provide secure mounting to a wall, machine panel, or
other flat surface.
Model For Modular Dimensions in. / mmNo. Sizes A B C
247792 " and " 2.32 / 59 0.55 / 14 2.91 / 74
247793 " and " 3.25 / 83 0.95 / 24 4.0 / 102
Model DrainPort Dimensions - in. / mm Weight
No. TypeSize lbs. / PTF A B C Dia. kg
85674 Manual 3.25 / 83 1.98 / 50 3.66 / 93 1.45 / 37 0.9 / 0.4
Back to Main Menu
8/10/2019 Industrial Pumping
50/5949
Industrial Pumping EquipmentAirCare Air Preparation Systems
Modular Air Line Equipment AccessoriesPorting Block
Installs between the quick clamps to provide three additional " outlets forauxiliary air.
Model For ModularNo. Sizes
247784 " and "
247785 " and "
Modular Air Line Equipment AccessoriesQuick Mount Pipe AdaptorsUse with quick clamp to provide threaded connections to the system piping.
Model No. For Modular use with Port Size - in.
247786" and " Modular
247787 247788
247789" and " Modular
247790
247791
Modular Air Line Equipment AccessoriesManifold BlockInstalls with quick clamps. Ports are threaded pipe to provide manifolding
capability for up to three components.
Model Port For Modular Dimensions-in. / mm
No. Size-in. Sizes A B
247794 " and " 1.76 / 44.6 1.98 / 50.3
247795 " and " 2.27 / 57.8 3.15 / 80
Modular Air Line Equipment AccessoriesPressure SwitchMonitors air pressure and provides an electrical signal when the pressure drops
below or exceeds the preset pressure. Installs between two quick clamps. Alsoprovides three additional " auxiliary outlets.
Model
For Maximum Operating
No.Modular Inlet Pressure Temperature Adjustment
Sizes psig / bar Range-F / CRange
247796 " and " 250 0 to 150 30 to 150247797 " and " 17 -20 to 65 2 to 10
Back to Main Menu
8/10/2019 Industrial Pumping
51/59
Industrial Pumping EquipmentAirCare Air Preparation Systems
50
Modular Air Line Equipment AccessoriesPanel Nut
Use to panel mount Regulators and Filter/Regulators.
Model For Modular
No. Sizes247780 " and "
247781 " and "
Modular Air Line Equipment AccessoriesWall Mount BracketUse to secure Modular Air Line components to a wall, machine panel, or other flat
surface.
Model For ModularNo. Sizes
247775 " and "
247776 " and "
Modular Air Line Equipment AccessoriesTamper Resistant Cover & Seal WireInstall on the adjusting knob of regulators to help prevent unauthorized adjustment
of the pressure setting.
Model For ModularNo. Sizes
247777 " and "
247778 " and "
Back to Main Menu
8/10/2019 Industrial Pumping
52/5951
Industrial Pumping EquipmentAirCare Air Preparation Systems
Air Line Equipment AccessoriesWall Mount Bracket-High CapacityUse to secure High Capacity Air Line components to a wall, machine panel, or
other flat surface.
Model No. Component247798 All Regulators
247799 All Filters and Lubricators
Air Line Equipment AccessoriesMounting Bracket and Nut-Miniature
Use to secure Miniature Air Line components to a wall, machine panel, or other
flat surface.
Model No. Component
247774 All Regulators and Lubricators
Air Line Equipment AccessoriesPressure Gauges
Available in " NPT and " NPT back connection.
Model For Regulator Gauge Connection PressureNo. Sizes Dia. Range-psi / bar
247843 " and " 1" " NPT 0 to 160 / 0 to 11247844
", " and 1" 2" " NPT247863 0 to 300 / 0 to 20
Back to Main Menu
8/10/2019 Industrial Pumping
53/59