Industrial ConnectivityRugged Power over Ethernet (PoE) SolutionsRugged Power over Ethernet (PoE) Solutions

Power Injectors

Ethernet PoE Switch

Industrial Power over Ethernet (PoE)

Ethernet Connectors

PROPRIETARY

Power Splitters

Power Supplies

CAT5E Ethernet Cable & Cordsets

Sixnet PoE Solutions

• Combines all the advantages of Ethernet with power in the same cable to simplify system wiring, reduce maintenance time and save money

• Provides standard Ethernet (802.3) and PoE (802.3af) making it truly open

PROPRIETARY

making it truly open

• Adapts for any application because it passes any and all Ethernet message packets regardless of origin or protocol

• Works with PoE devices as well as non-PoE devices

The Robust Performance You Need, with the PoE Capability You Want.

Why buy Sixnet PoE Solutions?

• Power and communications combined into a single cable

• 100% compatible Ethernet messaging

• Up to 15 Watts of clean DC power to run any industrial device

• Convenience and flexibility combined

PROPRIETARY

• Convenience and flexibility combined

• Higher performance (100Mbits/sec) than Profibus, DeviceNet or Foundation Fieldbus

• Low installation and maintenance costs

• High reliability

Standards Compliance

Rugged design to meet EN50121-5for railway network systems.

ISO9001 certified since 1996. With 13 years of no non-conformances, Sixnet quality is unmatched.

Switches designed to meet NEMA TS2 for traffic control systems.

All switches comply with FCC Part 15 and Industry Canada ICES-003.

PROPRIETARY

Switch design meets IEEE 1613 and IEC 61850 for power substations. KEMA approved.

Switches comply with UL508 andCAN/CSA C22.2/14-91M and UL1604.

Hard rated for harsh environments.

Switches comply with international maritime standards and are Type approved by ABS .

Sixnet ships RoHS compliant products.

All Sixnet switches meetCE requirements.

Ratings may vary by product.

Industrial Ethernet PoE Switch

• Four fully IEEE 802.3af compliant PoE ports– Power Sourcing Equipment (PSE) operation– Auto-detection of PD (powered devices)– Over-temperature and over-current detection– Over and under-voltage detection

• Real-time network operation– Intelligent message routing (no collisions)

PROPRIETARY

EB-5ES-PSE

Industrial Rated for Any Application.

– Intelligent message routing (no collisions)– Supports all standard IEEE 802.3 protocols

• True plug-and-play simplicity– Auto-sensing for speed and duplex– Auto-mdi/mdix-crossover and auto-polarity– Automatic PoE power management

• Trouble-free operation– Operating temperature -40 to 75°C – Dual power inputs with surge protection– DIN-rail or direct panel mounting

Application Diagram

Switch Senses and Only Puts Out Power

as Required.

PROPRIETARY

Model Description

EB-5ES-PSE-1 Industrial Ethernet switch with 4 PoE and 1 RJ45 uplink

EB-5ES-PSE-2SC with 1 multimode SC for links up to 4 km (special order)

EB-5ES-PSE-2ST with 1 multimode ST for links up to 4 km (special order)

Selection Guide

PROPRIETARY

EB-5ES-PSE-3SC with 1 singlemode SC for links up to 20 km (special order)

EB-5ES-PSE-3ST with 1 singlemode ST for links up to 20 km (special order)

EB-5ES-PSE-3SCLwith 1 singlemode long haul SC for links up to 40 km (special order)

EB-5ES-PSE-3STLwith 1 singlemode long haul ST for links up to 40 km (special order)

Industrial PoE Power Splitter

• IEEE 802.3af compliant PoE input port– Powered Device (PD) operation– Accepts power over signal or unused pairs– Supports power detection & classification

• True isolated power– 24 VDC power output (12/14V also available)

PROPRIETARY

Powers Any Industrial Device.

– 24 VDC power output (12/14V also available)– 13 watts of power available

• True plug-and-play simplicity – No user settings– Ready to use right out of the box

• Trouble-free operation– Truly industrial -40 to 75°C operation– DIN-rail or direct panel mounting

EB-PD-xxx

Selection Guide

Model Description

EB-PD-24V-1PoE splitter to power non-PoE or non-Ethernet 24 VDC devices

EB-PD-UPS-1PoE splitter for non-PoE 12/14 VDC devices and/or to charge a 12 VDC battery for UPS backup (special order)

PROPRIETARY

Industrial PoE Injectors

• IEEE 802.3af compliant PoE ports– Power Sourcing Equipment (PSE) operation– Auto-detection of PD (powered devices)– Supplies up to 15.4 watts per channel– Over-temperature and over-current detection– Over and under-voltage detection

PROPRIETARY

• True plug and play simplicity – No user settings– Ready to use right out of the box

• Trouble-Free Operation– Truly industrial -40 to 75°C operation– Slim package for DIN-rail or direct panel mounting

EB-PSE-24V-1 EB-PSE-48V-2

Rugged, Reliable and Easy to Use

Switches.

Selection Guide

Model Description

EB-PSE-24V-1A PoE injector for 1 PoE port (uses unused pairs), 24V input

EB-PSE-48V-2A PoE injector for 2 PoE port (uses unused pairs), 48V input

EB-PSE-24V-1Buses signal pairs for PoE, ideal for 4 wire cables (special order)

PROPRIETARY

EB-PSE-48V-1Buses signal pairs for PoE, ideal for 4 wire cables (special order)

Application Diagrams

Single Injector Dual Injector

PROPRIETARY

Industrial Power Supplies

• EB-PS-AC48-75 (75 watts)– Output: 48 VDC @ 1.5 Amps– Universal AC input from 85 – 264 VAC– Compact size – fits in small enclosures– Ideal to power up to 5 PoE devices

• EB-PS-AC48-120 (120 watts)– Output: 48 VDC @ 2.5 Amps

PROPRIETARY

– Output: 48 VDC @ 2.5 Amps – Selectable AC input up to 264 VAC– Compact size

− High power to size ratio

– Ideal to power up to 8 PoE devices

• EB-PS-4824-13 (13 watts)– Ultra-compact isolated DC-DC converter– Ideal for 48 VDC (PoE) systems requiring some 24 VDC – Output: 24 VDC @ 540 mA (13 Watts) – Input: 45-56 VDC (48 VDC nominal)– Slim packaging fits on any DIN-rail

Selection Guide

Model Description

EB-PS-AC48-75 AC to 48 VDC power supply; 75 Watts (1.5 Amp)

EB-PS-AC48-120 AC to 48 VDC power supply; 120 Watts (2.5 Amp)

EB-PS-4824-13 48 VDC to 24 VDC power supply 13 Watts (0.540 Amps)

PROPRIETARY

RJ45 Ethernet Plug

RJ45 Bulkhead Connector

Industrial IP67 Ethernet Connectors

• IP67 (NEMA 6) rated to protect against fluids (water, oil, etc.) and dust

• Shock, vibration and traction (pulling) resistant – ideal for military applications

• Strain relief prevents cable breaks

PROPRIETARY

Protective Cap with Tether

• Strain relief prevents cable breaks

• Circular reverse-bayonet (1/4-turn) for the quickest and easiest latching

• Field-installable plugs

• Fits over standard Ethernet cables

• Industrial rated for any application The Perfect Match forKevlar-Reinforced Ethernet

Cables.

Selection Guide

Model Description

EB-RJF-BLKHD-1IP67 quick-latching (1/4 turn) bulk-head (through-wall) connector

EB-RJF-PLUG-1IP67 field-installable quick-latching (1/4 turn) Ethernet plug

EB-RJF-CAP-1 IP67 protective cap for bulk-head connector

PROPRIETARY

EB-RJF-CAP-1 IP67 protective cap for bulk-head connector

Industrial CAT5E Kevlar Cable

• Kevlar-reinforced for superior pulling strength

• Category 5E for up to 1000BaseT connections

• Doubled shielded for the best noise immunity

• High flexibility for easy routing and repeated bending

PROPRIETARY

bending

• Excellent UV, hydrolysis and microbial resistance

• Low smoke, halogen-free, flame-retardant (HFFR)

• Polyurethane jacket material (UL94V-0) for personnel safety

• Industrial operating temperature range of -50 to +85°°°°C

• Shielded RJ45 plugs with gold plated contacts

Inorganic Substances Temp °°°°C Concentration Reaction

AMMONIA, AQU. Room 10% nil

BORIC ACID Room 100% nil to slight

HYDROCHLORIC ACID 20% Room 20% nil to slight

HYDROGEN PEROXIDE Room 3% nil to slight

HYDROGEN SULPHIDE Room nil to slight

MERCURY Room 100% nil to slight

no

Organic Substances Temp °°°°C Concentration Reaction

ACETIC ACID Room 20% slight

DIESEL OIL Room 5% nil

ETHYL ALCOHOL Room 100% slight

ETHYLETHER Room slight

GLYCERIN Room nil

GLYCOL Room 2% nil

HYDRAULIC OIL Room slight

ISOPROPANOL Room 12% slight

CAT5E Jacket Chemical Resistant

PROPRIETARY

Key to Reaction:• Nil: Excellent resistance over a prolonged period • Nil to slight: Very good resistance over a prolonged period• Slight: Good resistance (after prolonged exposure some

affect maybe noticeable)• Poor: Short term contact possible under certain conditions• No resistance: Pronounced attack

NITRIC ACID Room 20%no

resistance

PHOSPHORIC ACID Room 50% nil to slight

SEA WATER Room 100% nil

SULPHUR Room 100% nil to slight

SULPHURIC ACID 20% Room slight

WATER Room nil

ISOPROPANOL Room 12% slight

ISOPROPYL ALCOHOL Room 100% slight

KEROSENE Room 3% nil

MACHINE OIL Room nil to slight

METHANOL Room 10% slight

MINERAL OIL 80 nil

VEGETABLE OIL/FATS Room nil

For a complete listing of substances tested,

see datasheet.

Selection Guide

Model Description

EB-CAT5E-100B 100 meter bulk reel

EB-CAT5E-300B 300 meter bulk reel

EB-CAT5E-xCC Cordset with 2 RJ45 plugs

PROPRIETARY

EB-CAT5E-xCF Cordset with 1 RJ45 and 1 RJF IP67 plug

EB-CAT5E-xFF Cordset with 2 RJF IP67 plugs

Key :x = Length in meters up to 100C = RJ45 plug (shielded with strain relief boot)F = EB-RJF-PLUG-1 (IP67 plug – see datasheet)

Industry Applications

• Industrial Connectivity– Power & Energy– Transportation

PROPRIETARY

– Transportation– Utilities – Maritime – Military– Video & Security– Mobile Data

Sixnet, LLC331 Ushers RoadBallston Lake, NY 12019Ballston Lake, NY 12019

T +1 518 877 5173 sales@sixnet.com

F +1 518 877 8346 www.sixnet.com