In order to satisfy the requirements of focusing high-power density for high-energy-density physics and inertial-fusion targets, we should be able to transport high-current, high-energy beams with low emittance growth. With this aim the US Heavy Ion Fusion program built the High Current Experiment (HCX), a driver scale single beam injector, with an electrostatic matching section and electrostatic and magnetic quadrupole transport sections, that provides a K+ ion beam current of 0.2-0.5 A for 5 µs. It constitutes a unique facility to study the maximum fill factor (ratio of beam radius to tube radius) allowable, keeping the cost of a power plant competitive, without degrading the beam quality. A deleterious effect when we increase the fill factor is the electron cloud effect, a recognized problem that limits the current and emittance on many large accelerators. Our goal here is to understand and mitigate this effect using new diagnostics that we developed coupled with state-of-the-art simulations. Explorations of Electron Cloud Effects and the consequences for Heavy-Ion Drivers for HEDP and Inertial Fusion Energy * M. KIREEFF COVO, LLNL and UCB, A.W. MOLVIK, R. COHEN, A. FRIEDMAN, LLNL, J-L. VAY, F. BIENIOSEK, D. BACA, P. A. SEIDL, LBNL, J. VUJIC, C. LEISTER, B.E. ROSENBERG, UCB Conclusio ns Physical mechanism of electron production 46th Annual Meeting of the Division of Plasma Physics November 15-19, 2004 Savannah, GA WARP simulations show electron density distributions inside the magnetic quadrupoles • The High-Current Experiment (HCX) instrumented with new diagnostics is an unique platform to explore sources of electron generation and accumulation in positively charged beams. • The simulations not only reproduce qualitative aspects of the experiments, but also show some unanticipated physical effects. * This work was performed under the auspices of the U.S. Department of Energy by University of California, LLNL and LBNL under contracts W-7405- Eng-48, and DE-AC03-76F00098. Fusion power plant cost reduced by high fill factor beams Cost of a Fusion Power Plant is function of fill factor At the range of interest (beyond 60%), the beam runs closer to the walls and starts to produce secondary electrons and desorbed gas, which could move to the beam path and be ionized. The electrons produced are trapped by the space charge beam potential. We start to lose control of the beam transport and produce more secondary electrons and desorbed gas. It is the beginning of the “electron cloud effect”. New diagnostics were designed and placed within and between the magnets Capacitive, flush and gridded probes were placed inside the magnets, clearing electrodes and a retarding potential analyzer were placed between magnets, allowing to measure sources of electrons and expelled or secondary ions and test mitigation methods. HCX instrumented to carry out “fill factor” and electron cloud experiments 2005 High-Energy-Density-Physics (HEDP) Summer School Electron distribution depends of the NATURE of the electron source A novel interpolated mover has been successfully used, allowing electrons to be advanced with larger timestep, without compromising accuracy. Beam hitting gas or walls creates electrons and gas At grazing incidence, each ion of K+ ion with energy of 1MeV desorbs 10,000 molecules of gas and produces 100 electrons, which can multiply. WARP simulations show phase space similar to the experiments Optical scan Warp simulation

In order to satisfy the requirements of focusing high-power density for high-energy-density physics and inertial-fusion targets, we should be able to transport

Download PPT Report

Upload
deirdre-clarissa-gilbert
View
220
Download
0

Tags:

Embed Size (px)

Citation preview

Page 1: In order to satisfy the requirements of focusing high-power density for high-energy-density physics and inertial-fusion targets, we should be able to transport

Explorations of Electron Cloud Effects and the consequences for Heavy-Ion Drivers for HEDP and Inertial Fusion Energy *M. KIREEFF COVO, LLNL and UCB, A.W. MOLVIK, R. COHEN, A. FRIEDMAN, LLNL, J-L. VAY, F. BIENIOSEK,

D. BACA, P. A. SEIDL, LBNL, J. VUJIC, C. LEISTER, B.E. ROSENBERG, UCB

Conclusions

Physical mechanism of electron production

46th Annual Meeting of the Division of Plasma Physics November 15-19, 2004 Savannah, GA

WARP simulations show electron density distributions inside the magnetic quadrupoles

• The High-Current Experiment (HCX) instrumented with new diagnostics is an unique platform to explore sources of electron generation and accumulation in positively charged beams. • The simulations not only reproduce qualitative aspects of the experiments, but also show some unanticipated physical effects.

* This work was performed under the auspices of the U.S. Department of Energy by University of California, LLNL and LBNL under contracts W-7405-Eng-48, and DE-AC03-76F00098.

Fusion power plant cost reduced by high fill factor beams

Cost of a Fusion Power Plant is function of fill factor

At the range of interest (beyond 60%), the beam runs closer to the walls and starts to produce secondary electrons and desorbed gas, which could move to the beam path and be ionized. The electrons produced are trapped by the space charge beam potential. We start to lose control of the beam transport and produce more secondary electrons and desorbed gas. It is the beginning of the “electron cloud effect”.

New diagnostics were designed and placed within and between the magnets Capacitive, flush and gridded probes were placed inside the magnets, clearing electrodes and a retarding potential analyzer were placed between magnets, allowing to measure sources of electrons and expelled or secondary ions and test mitigation methods.

HCX instrumented to carry out “fill factor” and electron cloud experiments

2005 High-Energy-Density-Physics (HEDP) Summer School

Electron distribution depends of the NATURE of the electron source

A novel interpolated mover has been successfully used, allowing electrons to be advanced with larger timestep, without compromising accuracy.

Beam hitting gas or walls creates electrons and gas

At grazing incidence, each ion of K+ ion with energy of 1MeV desorbs 10,000 molecules of gas and produces 100 electrons, which can multiply.

WARP simulations show phase space similar to the experiments

tica

l sca

War

p s

imu