Embed Size (px)
DESCRIPTION
Â
Citation preview
847-676-1900 OR TOLL-FREE: 800-323-1818
JULY 16, 2015 – VOL. 65, ISSUE #15
SINCE 1951...CONNECTING BUYERS AND SELLERS IN THEMETALWORKING ANDMANUFACTURING INDUSTRIES
Our 65th Year of PublishingWWW.IMPMAGAZINE.COM7842LincolnAvenue•Skokie,IL60077•USA
PRESORTEDSTANDARD
U.S.POSTAGEPAID
Waupaca,WIPermitNo.81
ATTENTION:MANAGER,BUY&SELLEQUIPMENTORCURRENTPOSTALCUSTOMER
800.754.6920
Cut your costsand run lean.
REV UP YOUR MACHINE TOOLSWITH HIGH-PERFORMANCE BLADES
FROM SAWBLADE.COM.
SOUTH-TEC showcases the latest manufacturingmarvels for your evaluation, comparison andface-to-face collaboration.
• Find solutions to your toughest challenges
• Engage rst-hand with technology e perts
• Gain a competitive edge
Meet the Industry leaders and make connectionsin the robust Southeast region that will keep yourbusiness thriving well into the future.
October 27-29, 2015Charlotte Convention CenterCharlotte, North Carolina
advancingmanufacturingTECHNOLOGY | SOLUTIONS | WORKFORCE
official media partner
SOUTH-TEC® is produced by SME
southteconline.com
Register today for free.Use Promo Code ST15IMP online or bring this ad to SOUTH-TEC.
July 16, 2015www.impmagazine.comFOR SALE / WANTED 3
BEARINGS WANTED
--WWAANNTTEEDD--EXCESSBEARING
INVENTORYBEARING & DRIVE SYSTEMS
14888 Foltz ParkwayStrongsville, OH 44149
(440) 846-9700Or Call Toll-Free Nationwide
800-772-2479FAX: (440) 846-5560
www.bdsbearing.come-mail: [email protected]
WE PAY CASH FOR:• BEARINGS
• ROLLER CHAIN• SPROCKETS
• SPEED REDUCERS• V BELTS
• SHEAVES• COUPLINGS
• ELECTRIC MOTORS
WANTEDSURPLUS INVENTORIES
Call or FAX Today
800-382-0556Email: [email protected]
FAX: 205-252-2581BEARINGS & POWERTRANSMISSION, INC.
702 5th Avenue NorthBirmingham, AL 35203
BEARINGS WANTED
BI-FOLD DOORS
WANTED TO BUY
281-339-3382 • Fax: [email protected]
WWW.RBMOSHERCO.COM
��
�
�We Rent Bag and Cartridge Filters...
Call for Availability
BAG FILTER VESSELSGOULDS & DURCO PUMPSY AND BASKET STRAINERSSTEAM TRAPS
INDUSTRIAL EQUIPMENT WANTED
SURPLUS MOBILE OR STATIONARY COMPRESSED GAS
e-mail: [email protected] • web: www.weldship.com
WWAANNTTEEDD TTOO BBUUYY
Call or Write:WELDSHIP CORPORATION
508-898-0100 • FAX: 508-898-284575 E. Main St., Westborough, MA 01581
CYLINDERS•TUBE TRAILERS•STORAGE VESSELS
ALSO–STORAGE TANKS FOR LIQUID OXYGEN, NITROGEN, ETC.ANY CONDITION • ANY QUANTITY • ANY PLACE
WE BUY & SELLSAFETY/RELIEF VALVES•CONTROL VALVES
FORGED STEEL•ACTUATORS & MORE
800-523-2159In Alabama: 251-675-5282 • FAX: 251-679-5005
www.indvalve.com • Email: [email protected]
ACTUATORS / VALVES WANTED
Subscribe Today!
INDUSTRIALMARKET PLACE
1-800-323-1818
• Ball Valves• Meter Runs• Relief Valves• Electric Motors• Control Valves• Plug Valves• Flanges• Fittings• Wellhead Equipment• Generator Sets• Studs / Nuts
WE BUY / SELL / BROKERNEW – USED – SURPLUS
JORY L. BERNARD, LLC337-364-5394 FAX: 337-364-5397Cell: 337-962-7311 [email protected]
www.jlbthefarm.com
• Chokes• Checks• Drilling Equipment• Gears• Pipe• Actuators• Instruments• Pumps• Engines• Production Equipment• Pressure Vessels
VALVES–PRODUCTION EQUIPMENT WANTED
To Buy & SellCall...
INDUSTRIALMARKET
PLACE
1-800-323-1818
July 16, 2015 www.impmagazine.com4
AMERICANBREAKERS1310 East Edinger, Unit C
Santa Ana, CA 92705Let Us Be Your #1
Source For Circuit Breakers,
Switches &Hardware, Etc.
All Makes - Current & Obsolete
New & Reconditioned2-Year Warranty
Lowest Prices Guaranteed!
888-317-6500FAX: 714-429-0995Email: [email protected]
Se Habla EspañolQUALITY & VALUE
ELECTRICALEQUIPMENT
ROYAL BEARING, INC.17719 N.E. Sandy Blvd. • Portland, Oregon 97230
800-279-0992Phone: (503) 231-0992 • Fax: (503) 231-1190
www.royalbearing.com • E-mail: [email protected]
WE PAY INSTANT
FOR UNUSEDSURPLUS BEARINGSGive us a call or send your list by E-mail or Fax...
We Pay ALL The Freight.
CASHBEARINGS WANTED
We Buy/Sell/Trade Furnaces, such as:Walk-In Ovens • Box • Pit Type • Belt
• Atmosphere Generators • Box Type Draw• Internal Quench • Vacuum • Combustion Air Blowers
The “Elder Statesman” of Used Ovens & Heat Treating Furnaces
OVER 150 IN STOCK…READY FOR INSPECTION & DELIVERY
For Complete Specifications and Pricing Visit Our Web Site:
www.whkay.com Email: [email protected]
The W.H. ay Company30925 Aurora Rd. • Solon, OH 44139
440-519-3800 • Fax: 440-519-1455
THE W.H. KAY COMPANY SINCE1936
FURNACES & OVENS WANTED
INDEX
WANTED FOR SALE WANTED FOR SALE
AUCTIONS, ON-LINE AUCTIONS, BID SALES ...................AUCTION .........................................................SECTION 1A-12AACTUATORS ............................... 3 .................................BAND SAW BLADES ............................ FRONT COVERBAND SAWS PARTS ............................ FRONT COVERBEARINGS ............................... 3,4 .................................BI-FOLD DOORS ..........................................................3BRIDGE CRANES .........................................................6ELECTRICAL EQUIPMENT ..... 5,6 ............................4,5FURNACES ................................. 4 ...............................6HYDRAULIC PUMPS .............................. BACK COVERHYDRAULICS .......................................... BACK COVERINDUSTRIAL ASSOCIATIONS ....................................10INDUSTRIAL EQUIPMENT ......... 3 ...............................3
INDUSTRIAL / MACHINE TOOL SHOWS ............................INSIDE FRONT COVER,7, ..........................................................INSIDE BACK COVERINTERNET DIRECTORY ............................................8,9MIST COLLECTORS .....................................................6OIL MIST COLLECTORS ..............................................6OVENS ....................................... 4 .................................PAINTING-EQUIPMENT ...............................................3 PRODUCTION EQUIPMENT ..........................................3 PUMPS .................................................... BACK COVER SCHWEISS BI-FOLD DOORS ......................................3SMOKING SHELTERS ..................................................5TAPPING SOLUTIONS .................................................6TRANSFORMERS ........................................................6VALVES PRODUCTION EQUIPMENT .......................... 3 .................................VALVES PUMPS ..................................... BACK COVERVALVES ....................................... 3 .................................
MEMBER: PEARL (Professional Electrical Apparatus Recycling League)INDUSTRIAL MARKET PLACE is listed in Standard Rate and Data Service’s Business Publication Rates and Data.
Established in 1951, Industrial Market Place is published every two weeks. All advertise-ments and designs are the property of the publisher and may not be reproduced in any form without permission.SUBSCRIPTIONS: 27 yearly issues mailed first class. Cost is $195.00 for 1 year; $295.000 for 2 years.
We Accept American Express, Discover, MasterCard and Visa
Connecting Buyers and Sellers in the Metalworking Industry...Since 1951
INDUSTRIAL MARKET PLACE 7842 N. Lincoln Ave., Skokie, IL 60077
For Advertising Information, Call Toll-Free:800-323-1818 (From United States & Canada)
847-676-1900 • Fax: 847-676-0063 website: www.impmagazine.come-mail: [email protected]
JULY 16, 2015VOLUME 65, NO. 15
FULL PAGE ADVERTISERSEQUIPNET AUCTIONS (www.equipnet.com) ......................................AUCTION - BACK COVERHENDERSON AUCTIONS (www.HendersonAuctions.com) .................AUCTION - FRONT COVERHILCO INDUSTRIAL (www.hilcoind.com.com) ........................ AUCTION - INSIDE FRONT COVERIAAS WORLDWIDE, LLC (www.iaasworldwide.com) .............. AUCTION - INSIDE FRONT COVERINTERNET DIRECTORY ...............................................................................................................8,9MYRON BOWLING (www.myronbowling.com) ............................ AUCTION - INSIDE BACK COVERPEARL (www.pearl.com)...............................................................................................................10SAWBLADE (www.sawblade.com) .......................................................................FRONT COVERSCENERY HYDRAULIC (www.sceneryhydraulic.com) ................................................ BACK COVERSOUTH-TEC 2015 SHOW (www.southteconline.com) ...................................... INSIDE FRONT COVERWESTEC 2015 SHOW (www.WESTEConline.com) ................................ INSIDE BACK COVERWISCONSIN MFG. & TECHNOLOGY SHOW 2015 (www.WIMTS.com) .......................................7
PUBLISHER Joel Wineberg x204
ART/PRODUCTION DIRECTOR Ashur Mikael x216
ADVERTISING DESIGN/ PRODUCTION Hilary Whittington x224
INTERNATIONAL SALES REPRESENTATIVES Dave Ernst x213 Gloria Lappe x219 Ted Lavine x222 Jon Schneider x214 Judie Sibell x221 Dan Tepperman x223
DATA ENTRY Ashley Chrzan
ASSOCIATE PUBLISHERS Jeremy Solomon x202 Eliot Wineberg x201
FOUNDER Henry J. Wineberg (1906 - 1983)
SEPARATE AUCTION SECTIONSTAPLED IN CENTER-FOLD BETWEEN PAGES 6 AND 7
www.IMPMAGAZINE.comToll-Free 800-323-1818
July 16, 2015www.impmagazine.comFOR SALE 5
WE WANT TO BE YOUR 5KV CONTROL PARTS SUPER CENTERMonster Controls is an industrial electrical "Need-It-Now” resource
for obsolete 2.3kV, 4.16kV, 5.5kV and 7.2kV MOTOR STARTERS,CONTACTORS, SWITCHES AND THEIR ASSOCIATED PARTS
WHATARE YOULOOKING
FOR?
WEST LOCATION:Contact: Randy GoodmanEmail: [email protected] SE 23rd Ave. • Portland, OR 97202Toll Free: 888-820-4335503-238-3685
EAST LOCATION:Contact: Norm Cummerson
Email: [email protected] Commerce Rd., Suite N • Fairfield, NJ 07004
Toll Free: 877-444-1798862-210-8653 • Fax: 862-210-8672
MONSTER CONTROLS
WWW.MONSTERCONTROLS.COM
CONTACTORS
CONTROL POWERTRANSFORMERS
STARTERS
PARTS
EQUIPMENT
ISOLATIONSWITCHES
ELECTRICAL EQUIPMENT
SMOKING SHELTERSELECTRICAL EQUIPMENT
• Sales• Service• Rentals
July 16, 2015 www.impmagazine.com FOR SALE / WANTED6
MIST COLLECTORS
TAPPING SOLUTIONS
Our Bench, Horizontal, Floor and Automated Machinesare used throughout the Stamping, Die Casting, ScrewMachine, and CNC Parts Manufacturing Industries.
Available with Quick Change Tooling or Multiple Spindle Configurations, SPEEDYCUT will convert secondary operations into PRIMARY PROFITS!
CALL FORCATALOG!DISTRIBUTOR
INQUIRIESINVITED!
When You Need It Done Right, You Need...SPEEDYCUT!
Now A Part Of ROCKFORD-ETTCO PROCUNIER
304 Winston Creek Parkway • Lakeland, FL 33810863-688-0071 • Fax: 863-682-6233
Email: [email protected] • www.rockford-ettco.com
Affordable Paragon heattreating furnaces
Paragon Industries, L.P.2011 S. Town East Blvd.Mesquite, Texas 75149
Affordable, reliable, andmade in the USA since 1948.800-876-4328 / 972-288-7557
•4” thick walls
•Safety switch turns offheating elements when youopen the door
•Fully programmable digitalcontroller
•Heavy duty hinge shaft
•18” W x 13” D x 13” H
•Rated to 2350°F / 1287°C
•Many other sizes available
$2,820.00
PMT-18
FURNACES
P.O. Box 180 • Colman, SD 57017
USA Toll Free 800-843-7994www.t-r.com • Email: [email protected]
605-534-3555 • FAX: 605-534-3861WE BUY…WE SELL
T&RELECTRICSUPPLY COMPANY INCORPORATED®
One Of The World’s Largest InventoriesOne Of The World’s Largest Inventories
TTRRAANNSSFFOORRMMEERRSS
DISTRIBUTION & SUBSTATIONTRANSFORMERS
New • Rewound • Reconditioned
• Complete OutdoorSubstations
• Circuit Breakers• Regulators• Switchgear
• Modern Rewind Facilities
• More Than 45 AcresOf Inventory
“The Transformer People”
Prompt DeliveryCoast-To-Coast
TRANSFORMERS
To Buy & SellCall...
INDUSTRIALMARKET
PLACE
1-800-323-1818
We Sell Reconditionedor “Electrically O.K.”
We Will Also Buy Your Spares!
Contact:
ROWELECTRICALEQUIPMENT
800-248-4479FAX: 419-244-8887
E-mail:[email protected]
Website:rowelectrical.com
ELECTRICALEQUIPMENT WANTED
• Squirrel Cage• Slip Ring• Design D
Press Motors• Gear Motors• D.C. Motors
ELECTRIC MOTORSCONTROLS
TRANSFORMERS– Bought & Sold –
July 16, 2015www.impmagazine.comFOR SALE 7
FREE ADMISSION, REGISTER NOW! WWW.WIMTS.COM
Provided by Haas Factory Outlet
WHAT YOU’LL GAIN FROM ATTENDING:
SEE THE FUTURE OF THE MANUFACTURING INDUSTRY
REGISTER NOW FOR WISCONSIN’S LARGEST MANUFACTURING EVENT!
This is the show for education, collaboration, and innovation for the manufacturing and machine tool industries. See the latesttechnologies, interact with industry leaders, and discover solutions to all your manufacturing challenges. REGISTER ONLINE!
SAVE $15 WHEN YOU REGISTER ONLINE BEFORE SEPTEMBER 18, 2015!
Exposition Center at Wisconsin State Fair Park | Milwaukee, WI
WWW.WIMTS.COM
• Learn new manufacturing methods• Meet valuable contacts and form alliances with suppliers• See and compare machinery up and running• Track industry trends• Buy machines at show prices• Over 200 world-class suppliers and service companies
• Find out what OEMS are working on• Update skills with FREE seminars• Find productive solutions• More than 100,000 square feet of the latest
technology to keep your manufacturing lean, productive, and pro table
July 16, 2015 www.impmagazine.com INTERNET DIRECTORY8
Accudyne Corp. www.ezpullerusa.com and www.eztram.com
Accudyne Corporation is an Independently Owned Small Business
Dedicated to Increasing Accuracy, Productivity and Profits on the
Shop Floor by Introducing Unique Tools and Ideas that will Benefit
Machinists Everywhere.
Alloys & Components, Southwest
www.alloysandcomponents.com
Metric Hydraulic Cylinder Tubes & Rods Up To 200mm,
Cut-To-Length - No Minimum Order - Same Day Ship
American Breakers www.americanbreakersca.com
Dealer & Distributor of Circuit Breakers
American Fabricating www.americanfabricatingllc.com
Manufacturers Of Affordable, Accurate Hoist Testing Equipment
AMT Machine Systems www.servocam.com
Specializing In Fixed Headstock & Production Turning Solutions,
AMT Manufactures, Sells & Services Single Spindle CNC Screw
Machines. Whether You Need Single Axis CNC Turning Or Multi Slide
- Multi Axis Turning, AMT Has The Answer
Atek Corporation www.atekcorporation.com
Leading Provider Of Low Cost, High Quality Small Press Brakes
Atlas Electric, Inc. www.atlaselectricinc.com
Since 1987, We Have Been Providing Our Customers With Quality
New, Used, Surplus & Rebuilt Electrical Equipment. We Carry
A Large Inventory Of Circuit Breakers, Motors, Motor Controls,
Switchgear & Transformers. In Addition, We Can Provide Custom
Engineering, Manufacturing & Fabrication Of New Switchgear
& Substations For All Industrial, Mining & Tunneling Applications
ATP List Services www.atplists.com
Providing Business-to-Business Direct Mail Lists And E-mail
Lists. We Pride Ourselves On Superior Customer Service.
BCS Switchgear Inc. www.bcsswitchgear.com
BCS Switchgear Is The First Place To Come For New-Used and
Reconditioned Switchgear
Bearing & Drive Systems www.bdsbearing.com
Buyers of Excess Bearing Inventory
Bentec, Div. of Kiffer Industries, Inc. www.bentecbenders.
com
Providing Bentec Hydraulic Bending Machines, Which Provide
Maximum Versatility At An Affordable Price. Each Bentec Bending
Machine Is Designed & Built In Cleveland, Ohio
Best Parts Online (Kotek America) www.BestPartsOnline.com
Providing Oil Seals, Automotive Parts, Electronics, Industrial Parts,
Etc. Quick Shipping ... Low Prices ... Excellent Service
Bidspotter, Inc. www.bidspotter.com
World Leader In Live Interactive Auction Broadcasts. Created By
Auctioneers For Auctioneers
Bliss Clearing Niagara www.bcntechserv.com
Choose Experience For Stamping Press Repair, Press Parts,
Press Rebuilds & Stamping Press Upgrades. We Also Provide
All Press-Related Services
Brooktronics Engineering Corp. www.brooktronics.com
Providing The Highest Quality Brush Electroplating Equipment
& Outsourcing. We Specialize In The Development & Manufacture
Of Brush Plating Products
Burr King www.burrking.com
Manufacturer of Abrasives, Belt Grinders & Polishing Machines
Carell Corp. www.carellcorp.com
We Offer The World’s Best Plate Rolls & Angle Rolls. Carell
Corporation Carries The Largest Inventory Of Machine & Tooling
For The Roll Bending Industry & Can Manufacture Custom Tooling
For Your Difficult Or Specific Applications. Coiling Machines,
Initial Pinch Plate Rolls, 3 & 4-Roll Plate Rolls, Horizontal Universal
Presses, Corner Notchers & Ornamental Iron Universal Benders Are
Just Some Of The Machines We Offer
Carnie Cap www.carniecap.com
Providing The Most Effective Way To Cap Exposed Rebar &
The Danger It Can Create At Your Job Site ... Worker Impalement.
It’s The Cutting Edge In Impalement Protection
Clamprite www.clamprite.com
The First Thing To Wear Out On Your CNC Mill Is Often The
Drawbar Springs! Spindle Drawbar Force Gage Protects Your
Spindles, Avoids Unscheduled Downtime & Increases Cutter Life
Cooper Works or D. Cooper Works, LLC
www.pressbrakerepair.com
Restoration Of Press Brakes, Rams & Beds, Repairs of Leaking
Cylinders & Other DIfficult Millwright Services
Custom Service & Design www.customserviceanddesign.
com
Providing Hi-Tech Solutions To Virtually Any Filtration Application
In A Variety Of Industries
EIP European Industrial Products www.eip.us.com
Providing the tried and proven alternative in hydrostatic transmis-
sions, pumps, motors, valve plates and spare parts.
Elcan Industries www.elcanindustries.com
Providing Screening Solutions with the Best Particle Separation.
Our Top-of-the Line Screening Technology and Years of Experience
are Unmatched.
Electrical Surplus www.electricalsurplusonline.com
Providing Industrial & Commercial Electrical Equipment At
Wholesale Prices
Emerson Manufacturing Corp. www.emersonjacks.com
We Are A Family-Owned & Operated Company That Has Been
Marketing Professional Truck Shop Service Equipment For Over 45
Years. 100% Made In The USA!
Fab-Line Machinery www.fab-line.com
Fab-Line Machinery Is The Exclusive Importer For Baykal Machines
In The USA. Fab-Line Has An East Coast And A Midwest Office, 2
Warehouses & 20 Distributors To Service & Sell Within The USA
Fabricated Metals www.fabricatedmetals.com
Providing Instrumental Cases, Walk-Out Cantilevers, Steel
Foundations, Flashing Light Signals, Castings & Bases. Custom Metal
Fabrication Is Our Specialty
Federal Knife, Inc. www.federalknife.com
Supplier of Replacement Machine Blades For Shearing, Slitting,
Granulating, Planing & Forming Equipment. We Provide An
Economical, Efficient & Irreplaceable Value
Ferry, Inc. www.hyd-kits.com
Providing Hydraulic Cap & Plug Kits, Tube Kits, O-Ring Kits
& Storage Boxes
FIBA Technologies, Inc. www.fibatech.com
Buyers & Sellers Of DOT & ASME Code Seamless, Steel Pressure
Vessels, Tube Trailers, Cryogenic Tanks & Other High-Pressure,
Compressed Gas Storage, Transportation & Delivery Equipment
Formdrill USA, Inc. www.formdrill-usa.com
The Leader In Thermal Drilling. Advantages Of Thermal Drilling
Systems Are...Very Fast Processes, Stronger Joints, Cost-
Effectiveness, No Special Machines Needed, Small Investment,
No Additional Components, Less Production Steps, Clean
Workspace (Chipless)
Furnace Brokers www.furnacebrokers.com
Buyers & Sellers of Heat Treat Furnaces & Ovens
G&S Technologies www.gstechnologies.com
We Need Scrap Transformers, Insulated Wire and Cable
(Copper & Aluminum)
Gibson Abrasive Equipment www.gibson-equipment.com
Supplying Abrasive Blast Equipment & Replacement Parts.
Shot Blast Cleaning Applications Include Castings, Forgings,
Deburring, Peening, Automotive Parts, Oilfield Valves, Alternators,
Starters & More
Gomaplast Machinery, Inc. www.gomoplast.com
Buying and selling quality American made new-used and rebuilt
rubber machinery.
Haimer USA www.haimer-usa.comHaimer Is A German Toolholder Manufacturer That Leads The
Industry In The Development Of Shrink Fit & Balancing Technology. All Of Our Products Are Made In One Facility In Germany & They Are Stocked & Serviced In Chicago, Illinois Halogen Lighting Products Corp. www.halogen-lighting.com
Providing Services In Halogen Lighting, Industrial Lighting, Machine Lighting & Fluorescent Lighting H & B Petroleum Co. www.habcool.com
Manufacturers Of Cuttings Oils and Industrial Oils
Handi-Hut, Inc. www.handi-hut.comHandi-Hut Is A State-Of-The-Art Design & Manufacturing Company
With 35 Years Experience In Producing Quality-Engineered, Easily-Assembled, Pre-Fabricated Sections For Smoking Shelters & Other Glazed Structures That Can Be Shipped Anywhere. Handi-Hut Designs & Manufactures Pre-Fabricated Structures To Cover Almost Every Outdoor Need, Including Covered Walkways, Entry Enclosures, Canopies & MoreH&K Equipment, Inc. www.hkequipment.com
We Sell, Lease, Rent & Service Forklifts, Lift Trucks & Other Material Handling Equipment Hemly Tool Supply, Inc. www.hemlytool.com
Buyers & Sellers of Carbide Inserts High Quality Tools, Inc. www.hqtinq.com
Manufacturer & Distributor of Milling Machine Parts, Accessories, ToolingHi-Heat Co. www.hi-heat.com
Buyers & Sellers of Ovens, Furnaces & Furnace Replacement Parts HMS Lift Inc. www.brutelift.com
Providing a Wide Variety of Material Handling Equipment Including the Powerful Brute LiftHouston Dynamic Service, Inc. www.houstondynamic.com
Houston Dynamic Service, Inc. Has The Experience, Skilled Technicians & Modern Repair Facilities To Rebuild Or Service Any Of Your Rotating Mechanical Equipment. We Provide The Service You Need To Support Your Rotating Equipment Needs Industrial Valve www.indvalve.com
Buyers & Sellers of Safety Relief Valves, Activators & More Integrated TurboMachinery, Inc. www.integratedturbo.com
Integrated TurboMachinery Is A Critical-Operation Rotating Equipment Support Technologies Provider. We Specialize In The Sale & Repair Of Steam Turbines, Pumps, Compressors, Blowers & Gear Boxes. We Also Offer Upgrades, Field Services, Skid-Packaging & Engineering Services International Marketing Specialists www.bondtech.net
Designing, Engineering & Manufacturing All Types Of Autoclave Systems Jones Mfg. Co. www.mightygiant.com
Providing for Over 40 Years The Mighty Giant Tub Grinders - When You Think Tub Grinders, Think Mighty Giant Jory L. Bernard, LLC www.jlbthefarm.com
Buyers and Sellers of New, Surplus and Used Valves and other Industrial & Oil Field Related Equipment Kanetec www.kanetec.com
Manufacturer Of Magnetic Tools & Equipment Since 1959. Our Innovative Approach To Real World Problem-Solving Makes Us The Leader In Magnetic Tooling KBC Tools & Machinery www.kbctools.com or www.kbctoolsandmachinery.com
kbctools.com – Everything You Need For Your Machine Shop, Over 100,000 Items Shown
kbctoolsandmachinery.com – Metalworking Machinery, In-Depth Information, Everyyhing In One Place – Easy To Search – So You Can Quickly Find What You Need K.C. Technical Services, Inc. www.kctecserv.com
Providing A Broad Range Of Products, Including Flexible Packaging, Case Sealing Paper, Converting, Printing, Automatic Assembly, Medical Testing & Quality Assurance Kwik Mark www.kwikmark.com
Kwik Mark Dot Peen Marking Machines Make Permanent Metal Part Marking and Part ID Easy and is a Cost-Effective Alternative to Expensive Laser/CNC Marking. L&L Special Furnace Co., Inc. www.hotfurnace.com
Manufacturer of Tool Room Furnace Model #GS1714; Features Include Easy Lift Door, Program Control, Dimensions 17”W x 14”D x 12”H
INTERNET DIRECTORY
July 16, 2015www.impmagazine.comINTERNET DIRECTORY 9
THE ADVERTISERS LISTED BELOW ARE LINKED ON THE INDUSTRIAL MARKET PLACE WEBSITE: WWW.IMPMAGAZINE.COM
FOR THE LATEST INFORMATION ABOUT OUR CURRENT ADVERTISERS’ PRODUCT OFFERINGS, CHECK OUT THEIR WEB SITE BELOW
Lazco Corp. www.lazcocorp.comOur Core Business Is Buying & Selling New, Surplus & Used HVACR
Equipment, Parts & Compressors In The Global Air Conditioning Markets Lillbacka USA, Inc. www.lillbackausa.com
Hydraulic Hose Swaging & Hose Cutting Machines Were The First Products Manufactured By Finn-Power, And The Company, Now Named Lillbacka, Has Since Become A Leading Manufacturer In The World Market With Its Hose Equipment. Lillbacka Manufactures Thousands Of Hydraulic Swaging & Hose Cutting Machines Annually Lombard Metals www.lombardmetals.com
Providing Used Provision Equipment Machinery Marketing International, LLC / MMI www.mmi-auction.com
MMI Auction Is An On-Line Auction Site That Is Specifically Tailored To The Precision Machining & Machine Tool Business. Our B2B Machines Approach Makes Selling & Buying CNC Machines & CNC Equipment More Efficient & Cost-Effective Machine Tooling Technology www.mttkey.com
Distributor Of New & Used Keyseater Tooling, Used Keyseaters, Mitts & Merrill (Limited Supply) MacMillin Hydraulic www.macmhydraulic.com
Manufacturers of Pumps and Motor Mounts Mavrix Welding Automation, Inc. www.mavrixweld.com
We design and manufacture weld automation for the metal build up, hard facing and metal spray applications. Industries served include metal recycling, cement, power generation, rock crushing, sugar cane shredding, steel mill rolls and chocks, dredging, oil and gas and agri-cultural. McKenzie Engineering www.mckenzieengineering.com
When Making Chips, While Making Parts, The McKenzie Chip Separators Are There To Separate One From The Other In The Most Cost Effective Manner. MB Industrial Equipment, Inc. www.mbequipment.com
Buy & Sell Electrical Equipment Including DC Motors, AC Motors, DC Crane Shoe Brakes, DC Circuit Breakers, DC Contactors, DC Power Hoist Limit Switches Melmor Associates www.melmor.com
We Buy and Sell Used Material Handling Equipment MH Containers and Equipment Co., Inc. www.mhcontainers.com
Supplying All Types of Containers – Steel Containers, Wire Mesh Containers & Plastic Containers Moeller Precision Tool www.moellerprecisiontool.com
A Leading Supplier to the Stamping Industry Providing Standard and Special Tooling, Retainers, Punches and Stripper Assemblies. Mr. Shims www.mr.shims.com
Your Complete Source For Shims, Laser Alignment Tools & More! No Order Is Too Big Or Too Small...We Fill Them All North American Alloys www.northamericanalloys.com
North American Alloys Processes Titanium, Nickel Alloy and Special Metals Scrap. We Warehouse & Distribute New and Surplus Titanium Mill Products Oxarc www.oxarc.com
Providing Welding & Industrial Supplies, As Well As Specialty Gases Since 1968. Also Offering Emergency Repair Facility For Welding-Related Products Paragon Industries, L.P. www.paragonweb.com
Founded In 1948, Paragon Industries Manufactures Furnaces For Heat Treating, Dental Labs, Annealing, Knifemaking, Diesel Filter Cleaning, Etc. Paragon Furnaces & Kilns Are Made In America Paratherm www.paratherm.com/imp
We Evaluate, Engineer, Understand & Improve Hot Oil Systems, Heat Transfer Fluids & Processes Parker Boiler Co. www.parkerboiler.com
Parker Boiler Co. Is A World-Renowned Manufacturer Of Steam Boilers From 1.5 HP to 150 HP With Pressures To 250 PSI. We Manufacture Direct-Fired Hot Water Boilers (Available As Gas, Oil, Propane or Combination-Fired) Ranging From 300,000 to 6,800,000 BTU, With Operating Temperatures To 400°F & Pressures To 300 PSI, Condensing Boilers 399,000 BTU to 5,433,000 BTU Up To 180° and 80 PSI. Our Indirect-Fired Water Heaters (Available As Gas Or Propane-Fired) Range From 300,000 To 3,000,000 BTU Input, With Operating Temperatures To 190°F & Pressures To 150 PSI. We Manufacture High Termperature Thermal Liquid Heaters. We Also Are The Makers of Low NOx Steam & Hot Water Boilers & Burner Sytems
Park Thermal www.parkthermal.comManufacturers of New & Reconditioned Industrial Furnaces & Heat
Treat Equipment Phase-A-Matic, Inc. www.phase-a-matic.com
Phase Converters for Running 3-Phase Equipment On Single Phase Power Port of Galveston www.portofgalveston.com
The Port is located on the upper Texas coast at the mouth of the beautiful Galveston Bay just 30 minutes steaming time from the open sea. Powell Systems, Inc. www.powellsystems.com
Providing Quality Steel Containers For Over 70 Years. We Provide The Most Comprehensive Line Of Standard & Custom Corrugated Steel Containers For Any Application Proserv Anchor Crane Group www.proservcrane.com
Manufacturer of Overhead Cranes & Hoists, Dedicated To Building The Precise Crane & Crane Infrastructure For Your Specific Needs Protect All, Inc. www.protectallindustrial.com
Manufacturer Of Cutting Oils, Lubricants, Rust Preventatives & Industrial Products R.B. Mosher Co. www.rbmosher.com
Providing New And Used Filter Vessels Distributors For Filtrek And Rosedale. We Also Carry A Large Inventory Of Filters In Our Rental Division RLC Bit Service, Inc. www.rlcbit.com
RLC Bit Service, Inc. Has Been In Business For Over 25 Years. We Are A Family-Owned Business That Has Tackled Many Big Jobs At A Very Fair Price. We Want To Buy Your New & Used Surplus Bits As Well As Your Junk Bits Romac Supply www.romacsupply.com
Buyers, Sellers & Renters Of Surplus Electrical Equipment Including Circuit Breakers, Transformers, Motor Controls, Motors, Bus Duct, Panelboards, Fuses and Substations. We Also Retrofit & Repair Electrical EquipmentRow Electric Equipment www.rowelectrical.com
Buyers & Sellers Of Used Industrial Electrical Equipment Royal Products www.royalprod.com
Royal Products Is A Leading ISO-Registered Manufacturer Of Precision Metalworking Performance Accessories. One Of Our Primary Products Is The Royal Filtermist – A Low-Cost, Highly Efficient Mist & Smoke Collector Designed Specifically For The Metalworking Industry Salinger Electric Co., Inc. www.salingerelectric.com
Buyers and Sellers of New and Remanufactured Electrical Equipment SawBlade.com www.sawblade.com
Just 5 Clicks In 2 Minutes Can Save You Up To 30% On Your Band Saw Blades. We Ship In 2 Days From One of Our Strategic Weld Centers Located Through out The USA, Allowing You To Save On Shipping As Well. So Ask Yourself, Is 2 Minutes Of Your Time Worth Saving 30%? Schweiss Doors www.schweissdoors.com
We Manufacture & Install Low-Maintenance Custom One-Piece Hydraulic Doors That Lift Up & Out To Form A Canopy When Open, & Patented Bifold Liftstrap / Autolatch Doors, Both Of Which Are Distributed Internationally. With Clean Aesthetics, Simple Installation & Smooth, Quiet Operation, Our Strong Steel or Aluminum Frame Architectural Engineered Designer Doors Accept Most Cladding Systems; Glass, Polycarbonate, Wood, Steel, Etc., & Schweiss Hydraulic & Electrical Operated Bifold Doors Come With Many Safety Features & Upgrade Equipment. Finding The Right Custom Door For Any Application, Residential, Retail, Offices, Schools, Restaurants, Garage, Commercial, Industrial, Military, Hangars & More Is As Close As Your Telephone By Dialing 800-746-8273 Or By Visiting www.schweissdoors.com Scotchman Industries www.scotchman.com
Scotchman Industries’ “Metal Fabricating Solutions” Features: Hydraulic Ironworkers, From 45 To 150 Ton Capacity With Numerous Tooling Options, Punches & Dies and Custom Tooling Available; Circular Cold Saws (Manual To Fully Automatic, Pivot For Ferrous & Non-Ferrous Materials) With A Complete Selection Of Blades & A Blade Sharpening Service; Band Saws; Full Line Of Pipe Notchers: Manual, Electric & Abrasive Grinder/Notchers & Scotchman Manual Measuring Systems & Programmable Feed & Stop Systems: Quick, Easy, Accurate Length Setting & Feed Systems Manual To Fully Automatic For All Types Of Machinery
SiBore Drill www.siboredrill.com
Providing the Fast Reliable Horizontal Auger for Anyone that Needs a Hole Through Hard Material. If you Need to Lay a Pipe Underneath a Sidewalk or Driveway, SiBoredrill is all you Need. South Bend Lathe Co. www.southbendlathe.com
Founded in 1906, Within Just A Quarter Of A Century, South Bend Lathe Works Has Become The Largest Manufacturer Of Precision Metalworking Lathes In The World With Customers In More Than 88 Countries & Machines Which Are Used In Every Type Of Industry, Including Schools, Home Workshops & Large Manufacturers. We Are Proud To Boast That We Have The Largest Selection Of Premium Quality Manual Lathes In The World Spartan Felt Co. www.spartanfelt.com
Offering a total solution with your various products for your polish-ing application requirements STP Roto Machinery, Inc. www.stprotomachinery.com
Manufacturing The Widest Range Of Machines For The Rotomolding Industry. Quality & Reliability Are Our Watchwords. Our Machines Are User-Friendly Surplus Group www.surplusgroup.com
We Buy & Sell Surplus New & Used Industrial Equipment. Specializing In Air-Cooled & Water Cooled Chillers For HVAC & Industrial Processes Sutton-Garten www.usedwelder.com
Since 1918, Sutton-Garten Has Been A Welding Equipment Distributor. Large Fleet Of Rental Equipment And New & Used Equipment For Sale... Mig, TIg, Diesel, Gas, Plasma, Wire Feeders T&R Electric www.t-r.com
Buy, Sell, Rent & Deliver Distribution & Power Transformers & Switchgear Therma-Tron-X Inc. www.ttxinc.com
Providing Custom Powder Coating Systems, Finishing Systems, Water and Wastewater Treatment Paying Close Attention to Changing Regulations and New Environmental Concerns. We are an Industry Leader. Tiffin Loader Crane www.tiffincrane.com
TIffin Loader Crane Is Palfinger’s Flagship Retail Facility. TLC Is A One-Stop Retail Center For All Of Your Lifting, Loading & Delivery Equipment Needs Tri-Boro Storage Products www.triboroshelving.com
Manufacturer Of Steel Shelving & Storage Units For Industrial, Warehouse & Commercial Applications Tri-Motion Industries www.trimotionindustries.com
Providing Balancers & Lifters With Controls Which Create Solutions For Workforce Efficiency & Safety Versa Machinery www.versamachinery.com
Manufacturer Of High Quality Cutters & Pullers For The Rubber & Plastic Extrusion Industries VP Buildings www.vp.com
Varco Pruden Buildings is a World Leader in Providing Innovative Pre-Engineered Steel Building Systems. Each Year, VP Supplies Approximately 6,000 Buildings Ranging from 1,200 Square Feet to More Than One Million Square Feet Under Roof. Walton Co. www.waltontools.com
Walton Company Manufactures Tools For The Automotive, Plumbing & Mechanical Industries, Including Tap Extractors, Tap Extensions & REPS Pipe, Stud & Screw Extractors Weaver Electric www.weaverelec.com or www.buyweaver.com
Sales, Service & Rental Of Refurbished Electrical Equipment For Industrial & Commercial Use
Weldship Corporation www.weldship.comBuyers and Sellers of Compressed Gas Cylinders, Tube Trailers,
Cryogenic Storage Vessels Winsted www.winsted.com
Winsted is a Worldwide Leader in Control Room Console Solutions Providing Design, Engineering, Fabrication and Installation.
(The) W.H. Kay Company www.whkay.comInventory Of Used Heat Treating Furnaces & Industrial Ovens
WTG&S, Inc. www.acprodrive.com
We Build AC Frequency Spindle Drives To Convert Your Milling Machine To AC Frequency Drive. Reliable & Very Easy To Install *High Quality Electronic Components All Assembled In The USA, Years Of Smooth, Quiet And Reliable Operation, 1 Year Warranty
July 16, 2015 www.impmagazine.com FOR SALE10
SCENERY HYDRAULIC U.S.A.A VANE PUMP ENGINEERING & MANUFACTURING COMPANY
HYDRAULICMANAGEMENTGROUP, LLC OF USAA GLOBAL EXPERT IN VANE TECHNOLOGY
TO SERVE YOU WITH ALL TYPES OF VANE PUMPREPLACEMENT REQUIREMENTS...IN ALL INDUSTRIES
For Entire Mobile and Industrial HydraulicINDUSTRIES and APPLICATIONS
JOINS HAND WITH
SCENERY HYDRAULIC, INC.909-930-9586
HYDRAULIC MANAGEMENT GROUP, LLC OF USA248-804-2350
VIC
KE
RS
•D
EN
ISO
N•
AP
PLIC
ATIO
NS
VIC
KE
RS
•D
EN
ISO
N•
AP
PLIC
ATIO
NS
HMGUSA
BRAND
EQUIVALENT DIRECT REPLACEMENT TOVICKERS-DENISON-YUKEN-REXROTH:
V10/V20/V2010/2020/ and V/VQCOMPLETE PUMPS AND CARTRIDGE KITS
HMGUSA
BRAND
DENISON SERIES: T6C/D/EALL SIZES OF PUMPS AND CARTRIDGES
