The immobile access floor system is a product which is suitable
for different official places. The material of the panel of the
access floor is reinforced calcium sulfate which is non combustible
with the dimension of 600*600 mm. The understructure of this system
consist of galvanized steel tubes, they are adjustable in height
and corrosion resistant. For better function it is possible to use
cable boxes and ducts in different panels based on the customer
drawings.
Slide 3
The special feature of this product is that the panels can
joint in each other, with the help of this possibility we can have
a fixed system, also there is no need to use stringers for the
access floor under structure and more over it is possible to place
heating and cooling pipes in the special grooves in the the access
floor panels.
Slide 4
More and more space is heated and cooled through this system.
We can place the heating and cooling pipes in the grooves which are
on the panel surface. Then it is possible to fill the grooves with
a special body filler and finally we can cover the floor with any
type of floor covering. We use high density polyethylene PE-Xa
pipes. This special system reduces the rate of energy consumption
and obviously the heating and cooling costs.
Slide 5
This product can be use in both old and new buildings and
different types of floor coverings can be used as the finished
flooring: PVC HPL Stone & Ceramic Fabric Floor covering
Parquet
Slide 6
The advantages of the system: Extremely short construction time
Help in reducing the weight of the building Omitting the old
materials we used for installation Cooling and heating system
through the floor High function of cooling and heating through the
floor Very fast installation Fixed and integrated floor system Easy
access to the under floor High flexibility Possibility to install
in different height from 7 to 200 cm Create a vast space under the
floor High fire protection With acoustic features
Slide 7
1 st step: Install the access floor pedestals2 nd step:
Leveling the floor with laser level
Slide 8
3 rd step: Place the panels on the pedestals4 th step: Install
the finishing
Slide 9
FATHIRAN GROUP (SPARK MACHINE TOOL CO.) ADD: NO.6, AVIZ ST,
ALVAND ST, ARGENTINA SQ,TEHRAN,IRAN TEL:(+98-21)88674950-4 FAX:
(+98-21)88674998 [email protected] WWW.FATHIRAN.COM