Upload
dvdarchived
View
178
Download
16
Embed Size (px)
DESCRIPTION
Ein gutes Buch
Citation preview
With a unique knowledge of mineral technology, com-
bined with unrivalled depth of application expertise
IMERYS can select the most suitable grade to improve
the formulation of our customers’ products.
By enhancing what nature is providing, IMERYS can op-
timise many parameters such as particle size, particle
shape, particle packing, crystal microstructure, colour, ab-
sorbency and hardness. These transformations can
change depending on the properties that the cosmetic
industry requires, such as opacity, matting, gloss, absorp-
tion, rheology, abrasiveness and barrier coatings.
For example, Imerys mineral products can now be
processed under conditions which allow us to assure typ-
ical industry requirements on microbiology. The new
ImerCare 04K illustrates this principal as it applies to
Kaolin.
With a range of more than 25 different natural minerals
in its portfolio, IMERYS is the world leader in industrial
minerals. Its uncomparable expertise allows the company
to explore and develop new natural mineral based prod-
ucts for the personal care industry.
In addition to kaolin, the ImerCareTM range also includes
the following minerals:
PERLITEPerlite products are made from a
volcanic glass which contains water in
its inner structure. When heated
rapidly, the steam produced expands the
glass to form a foamed structure, which
can be used, when processed in fine controlled
particles, in many different personal care products.
The ImerCareTM “P” range perfectly meets high
purity, high absorption, excellent matting effect and
gentle abrasiveness requirements.
DIATOMACEOUS EARTHdiatomaceous Earth is a mineral
material consisting chiefly of
siliceous fragments of various
species of fossilized remains of
diatoms. It is divided into
categories based on its source;
freshwater or saltwater. Freshwater
diatomaceous Earth is mined from dry lake beds and
Saltwater diatomaceous Earth is mined from dry sea
beds.
The ImerCareTM “d” range meets high absorption,
excellent matting effect and gentle abrasiveness
requirements.
MICAMica under ImerCareTM “M” is a
naturally occurring silicate
mineral that is widely distributed
in different types of rock.
Mica often occurs as flakes, scraps or sheets and has been
used by humans since prehistoric times.
The true value of mica is in its unique physical properties.
Its highly delaminated sheets are platy, flexible, elastic
and can be transparent to opaque.
Muscovite mica can be incorporated in the formulations
of many cosmetics.
addIng vaLUE THROUgHnaTURaL MInErals
ImerCareTM KaolinFOR COSMETICS
Par Moor Centre, Par Moor Road, Par, Cornwall PL24 2SQ, UK
Tel: +44 1726 818000 Fax: +44 1726 811200
PMFE
/PC
O0
03
- F
irst
Edi
tion
- 0
4/13
|
For more information on the ImerCare range or to speak to our local
dedicated distribution network please visit the website:
www.imerys-perfmins.com
ImerCare kaolin formulations_printing version:Layout 1 22/08/2013 11:06 Page 1
KAOLIN is a naturally occurring hydrated aluminium silicate. Careful processing results in soft, fine particles suitable
for use in a variety of personal care products.
IMERYS kaolin reserves can be found in the United Kingdom, Brazil, USa and australia.
It is characterised as al2Si2O5(OH)4. Kaolin has a crystalline structure and has platey, hexagonal crystals.
The ImerCare™ kaolin portfolio offers cosmetics producers an unparalleled set of properties including absorption,
opacity, matting and softness. all of these attributes can be optimised to meet individual formulation requirements
through selective sourcing and processing control.
ImerCareTM
Kaolin formulations PrOduCTIOn OF sMOOThInG BOdy POWdEr FOr dry FlO Ts launCh
This body powder has an elegant and silky feel upon skin application. Kaolin to provide sebum absorption, soft touch
and improve the wear.
Process: Combine all ingredients, blend until uniform, package.
TradE naME InCI naME %W/W suPPlIEr
POWdEr PhasE
dRY-FLO® TS STaRCH TaPIOCa STaRCH 88.00% aKzOnOBEL gLOBaL
POLYMETHYLSILSESQUIOxanE PERSOnaL CaRE
IMErCarETM 2K hydrOus KaOlIn 5.00% IMErys
IMERCaRETM 3000M MICa 2.00% PRESPERSE InC.
KROnOS 1171 TITanIUM dIOxIdE E 171 2.00% KROnOS InTERnaTIOnaL
COLOROna® CaRMInE REd PIgMEnT 1.00% ROna CSP
TaPIOCa PURE STaRCH TaPIOCa STaRCH 2.00% aKzO nOBEL gLOBaL
PERSOnaL CaRE
TOTal 100.00%PhysICal PrOPErTIEs£ Whiteness, brightness with different tints
£ Opacity (refractory index 1.56)
£ acidic (ph 4-6)
£ Platey
£ White firing (specific grades)
£ hydrous Kaolin is hydrophilic
£ Good chemical resistance
MaIn PrOPErTIEs£ lamellar, platey structure (barrier effect)
£ rheology control, thixotropic effect
£ Opacity effect
£ Bulking effect
£ Chemical resistance, inertness
£ high whiteness & purity
£ soft touch
aPPlICaTIOns£ Make up
£ Mascara, eye shadow, eye contour
£ lipstick
£ CC Cream
£ hair care products
£ liquid foundations
£ Exfoliation face mask
£ Body powder
ImerCare kaolin formulations_printing version:Layout 1 22/08/2013 11:11 Page 2
naTural FaCE MasK
Purifying and hydrating mask for all skins with peg free emulsifiers. Kaolin to provide sebum and impurities absorption.
Process:
£ add satiaxane predispersed in glycerin in deionized water under mixing. Mix until gel is homogenous.
£ Warm phase a & B until 70-800C. add ain B under high shear mixing. Mix during 5mn.
£ add ImerCareTM 2K by sprinkling in the emulsion under mixing
£ Maintain agitation until t0 reach 400c, then add d, E, F and adjust pH if necessary.
TradE naME ChEMICal naME %W/W suPPlIEr
EMULgadE SE PF gLYCERYL STEaRaTE, CETEaRETH-20, 5.00% BaSF
CETaRETH-12, CETEaRYL aLCOHOL,
CETYL PaLMITaTE
a LanETTE O CETEaRYL aLCOHOL 1.00% BaSF
LaBRaFaC CC CaPRYLIC/CaPRIC TRIgLYCERIdES 5.00% gaTTEFOSSE
vEgELIgHT COCOnUT aLKanES (and) 5.00% gRanT
COCO-CaPRYLaTES/CaPRaTES
HUILE dE nOYaUx d'aBRICOTS PRUnUS aRMEnIaCa KERnEL OIL 1.00% BERTIn
BIOxan SF T50 TOCOPHEROL (MIxEd) 0.10% MaSSO
WaTER 76.80%
B gLYCERInE gLYCERInE 3.00% COPPER
SaTIaxanE Cx911 xanTHan gUM 0.40% UnIvaR
C IMErCarETM 2K KaOlIn 2.00% IMErys
d PERFUME 0.60%
E PRESERvaTIvES TBd
F dERMOFEEL Pa3 0.10%
g BIOxan aCETaTE 130IU TOCOPHERYL aCETaTE MaSSO 0.10%
H dE pH CORRECTOR TBd
TOTal 100.00%
MaTT dayCrEaM
natural formula daycream for oily skins for matt and purifying effect Kaolin to provide sebum control, matt effect and opacifying.
Process:
£ add satiaxane pre-dispersed in glycerin in deionized water under mixing. Mix until the gel is homogeneous.
£ Warm phase a and B until 70°-80°C . add a in B under high shear mixing. Mix during 5mn.
£ add the kaolin by sprinkling in the emulsion under mixing.
£ Maintaining the mixing, add the other phases at 40°C.
£ When it is at room t°C, adjust the pH to 5-5,5 depending on your preservative system choice.
TradE naME ChEMICal naME %W/W suPPlIEr
OLIvEM 1000 CETEaRYL OLIvaTE, SORBITan OLIvaTE 2.10% B&T COMPanY
OLIWax HYdROgEnaTEd OLIvE OIL and OLEa 0.77%
a EUROPEaE OLIvE FRUIT OIL and OLEa
EUROPEaE (OLIvE) OIL UnSaPIOnIFIaBLES
LanETTE O CETEaRYL aLCOHOL 0.35% BaSF
HUILE d’OLIvE 0.70% BERTIn
MYRITOL 318 CaPRYLIC/CaPRIC TRIgLYCERIdES 3.50% COgnIS
SEnSOLEnE ETHYLHExYL OLIvaTE 6.30% B&T COMPanY
dERMOFEEL TOCO 50 TOCOPHEROL 0.10% dR STRaETManS
nOn gMO
B WaTER 47.86%
PaLMERa g995 v gLYCERInE 5.00% CQMaSSO
SaTIxanE Cx911 xanTHan gUM 0.32% UnIvaR
C IMErCarETM 2K KaOlIn 30.00% IMErys
d ECOCERT PRESERvaTIvE TBd
E ETHanOL 3.00%
F FRagRanCE TBd
TOTal 100.00%
ExFOlIaTInG FaCE MasK
Purifying and exfoliating mask. Kaolin to provide sebum and impurities absorption.
Process:
£ disperse Carbopol into water by sprinkling on the surface of deionized water, without mixing, the polymer will wet out in a few minutes
£ add triethanolamine under mixing and mix until the gel is formed.
£ add Texapon under a slow mixing.
£ add ImerCareTM 2K by sprinkling in the gel under mixing and when dispersed add all the other ingredients.
TradE naME ChEMICal naME %W/W suPPlIEr
WaTER 75.70%
CaRBOPOL ULTREz 21 aCRYLaTES/C10-30 aLKYL 1.00% gaTTEFOSSE
a aCRYLaTE CROSSPOLYMER
TRIETHanOLaMInE 0.80%
B TExaPOn T42 TEa-LaURYL SULFaTE 15.00% BaSF
C IMErCarETM 2K KaOlIn 5.00% IMErys
d FLORaBEadS JOJOBa JOJOBa ESTERS 1.00% FLORaTECH
WHITE ESTERS
E FRagRanCE 0.50%
F PRESERvaTIvES QS
TOTal 100.00%
ImerCare kaolin formulations_printing version:Layout 1 22/08/2013 11:12 Page 3
TradE naME ChEMICal naME %W/W suPPlIEr
CERaPHYL 140 TaLC 61.40% aSHLand
ROnaFLaIR FInES BISMUTH OxYCHLORIdE 4.00% MERCK
a SUnTaLC LL TaLC and LaUROYL LYSInE 4.00% SUnJIn
IMErCarETM 07K KaOlIn 4.00% IMErys
SUnPMMa-x HEMISPHERICaL PMMa 4.00% SUnJIn
T80 LL TIO2/SIO2/JOJOBa ESTER/LaUROYL LYSInE 3.00%
B ManganESE vIOLET CI7742 15.00%
BLaCK 2 CI 77266 0.20%
OCTYLdOdECYL STEaROYL STEaRaTE 4.00%
SORBIC aCId 0.30%
C dERMOFEEL TOCO 50 nOn gMO 0.10%
FRagRanCE TBd
TOTal 100.00%
EyE shadOW
Long lasting colour with semi matt effect. Kaolin to provide sebum absorption, skin adhesion, opacifying effect, im-
prove the wear, reduce the migration of the colour.
Process:
£ Mix the white phase a and the phase B separately.
£ Mix phase a and B together until the mixing is homogeneous.
£ add the pre-homogenized phase C under mixing
£ Press into adequate molds.
ClassICal FaCE MasK
Purifying mask for oily skins. Kaolin to provide sebum and impurities absorption.
Process:
£ add actigum in deionized water and alcohol under mixing. Mix until the gel is homogeneous.
£ add ImerCareTM 2K by sprinkling in the gel under mixing.
£ add the other ingredients under mixing.
TradE naME ChEMICal naME %W/W suPPlIEr
WaTER 72.50%
a aCTIgUM vSx20 SCLEROTIUM gUM 0.50% CaRgILL LaSERSOn
ETHanOL dEB 100 ETHanOL 5.00%
B IMErCarETM 2K KaOlIn 20.00% IMErys
C CRILLET 1 POLYSORBaTE 20 1.00% CROda
d FRagRanCE 0.50%
E EUxYL K702 PHEnOxYETHanOL, BEnzOIC aCId, 0.50% SCHULKE
dEHYdROxYaCETIC aCId, aQUa,
ETHYLHExYLgLYCERIn,
POLYaMInOPROPYL BIgUanIdE
TOTal 100.00%
lOnG lasT lIPsTICK
Long lasting colour with a semi-matt effect. Kaolin to provide adhesion, oil retention, reduce the migration of colour and improve the
wear.
Process:
£ Prepare a pigment premix by blending phase C ingredients and homogenize until a uniform color is obtained with a three roll-mill.
£ Warm the phase a and B to 95°C and homogenize until all the waxes are perfectly melted.
£ add C to a and mix until homogeneous.
£ add powder ImerCareTM 02K-S under mixing maintaining the t°.
£ add phase E under mixing.
£ Then fill in adequate molds preheated at 50°C. Put in a fridge t° during 30mn.
TradE naME ChEMICal naME %W/W suPPlIEr
SOPHIM MC30 HYdROgEnaTEd POLYISOBUTEnE 13.45% SOPHIM
SCHERCEMOL 318 ESTER ISOPROPYL ISOSTEaRaTE 8.00% LUBRIzOL
a SOFTISan 645 BIS6dIgLYCERYL POLYaCYLadIPaTE-2 15.00% SaSOL
IndOPOL SCHERCEMOL POLYBUTEnE 5.00% InEOS OLIgOMER
TISC ESTER TRIISOSTERaYL CITRaTE 15.00% LUBRIzOL
MICROCRYSTaLLInE Wax 3.50% SOnnEBORn REFInEd
PROdUCTS
B EUPHORBIa CERIFERa (CandELLILa) Wax 6.00% STRaHL & PITCH
COPERnICa CERIFERa (CaRnaUBa) Wax 1.50% STRaHL & PITCH
OzOKERITE 2.50% KaHL & CO
TITanIUM dIOxIdE 0.20% SUn MaPRECOS
REd IROn OxIdES 4.50% SUn MaPRECOS
C REd 6 LaKE 1.50% SUn MaPRECOS
dC REd 7 LaKE REd 7 LaKE 0.60% SUn MaPRECOS
SOPHIM MC30 HYdROgEnaTEd POLYISOBUTEnE 13.20% SOPHIM
d IMErCarETM 02K-s KaOlIn 2.00% IMErys
E FLaMEnCO REd MICa , TIO2 8.00% BaSF
F aSCORBYL PaLMITaTE 0.05%
g FRagRanCE TBd
TOTal 100.00%
ImerCare kaolin formulations_printing version:Layout 1 22/08/2013 11:12 Page 4
lOnG lasT FOundaTIOn
Long lasting colour and matt effect on skin. Kaolin to provide absorption, opacifying, matt effect and a long-lasting effect.
Process:
£ Prepare a pigment premix by blending phase C ingredients and homogenize until a uniform color is obtained with a three roll-mill.
£ Warm the phase a to 80°C
£ add C to a and mix until homogeneous
£ Mix ingredient B together and warm until 70°C
£ Slowly add phase B into phase a/C while increasing speed mixing (800 to 1100 rpm)
£ Increase mixing speed little by little while adding B.
£ add the powder d ImerCareTM 07K under mixing
£ add phase E only when the mixture is under 50°C (flash point of xiameter is 77°C)
£ Then add F and g.
TradE naME ChEMICal naME %W/W suPPlIEr
a aBIL EM 90 CETYL PEg/PPg-10/1 dIMETHICOnE 2.00% EvOnIK
ISOLan gI 34 POLYCgYCERYL-4 ISOSTEaRaTE 1.00% EvOnIK
JOJOBa (BUxUS CHInEnSIS) OIL 1.00%
LaBRaFaC CC CaPRYLIC/CaPRIC TRIgLYCERIdES 8.00% gaTTEFOSSE
TEgOSOFT OP ETHYLHExYL PaLMITaTE 1.50% dEgUSSa
xIaMETER PMx-200 dIMETHICOnE 1.00% dOW CORnIng
SILICOnE FLUId 5CST
PaRaCERa W80 Wax MICROCRYSTaLLInE Wax 1.20% PaRaMELT
TOCOPHERYL aCETaTE 0.90%
B WaTER 61.24%
gLYCERInE gLYCERInE 1.00%
SOdIUM CHLORIdE 1.00%
C Sa-C47051 TIO2 and dIMETHICOnE 6.00% MIYOSHI KaSEI
Sa-C331700-102 CI77492 and dIMETHCOnE 0.74% MIYOSHI KaSEI
Sa-C332199-102 CI77491 and dIMETHICOnE 0.41% MIYOSHI KaSEI
Sa-C335000-102 CI77499 and dIMETHICOnE 0.01% MIYOSHI KaSEI
Fz-3196 CaPRYLYL dIMETHICOnE 5.00% dOW CORnIng
d IMErCarETM 07K KaOlIn 3.00% IMErys
E xIaMETER® PMx-0245 CYCLOPEnTaSILOxanE 5.00% xIaMETERCYCLOPEnTaSILOxanE
F PRESERvaTIvES TBd
g FRagRanCE TBd
TOTal 100.00%
EyE COnTOur
Eye contour with a soft focus effect. Kaolin to provide opacifying, reduce the greasy effect of the oils of the formula.
Process:
£ add satiaxane pre-dispersed in glycerin in deionized water under mixing. Mix until the gel is homogeneous.
£ Warm phase a and B until 70°-80°C. add a in B under high shear mixing. Mix during 5mn
£ add the pre-homogenized phase d by sprinkling in the emulsion under mixing.
£ Maintain agitation until the t° reach 40°C, then add F g and H if necessary.
TradE naME ChEMICal naME %W/W suPPlIEr
BEaUTYdERM HP gLYCERYL STEaRaTE and CETEaRYL 6.00% IMPag
aLCOHOL and STEaRIC aCId and SOdIUM
LaUROYL gLUTaMaTE
vEgELIgHT COCOnUT aLKanES (and) COCO- 4.00% gRanT
CaPRYLaTES/CaPRaTES
a OLIvE OIL 3.55% BERTIn
PLanTEC OLIvE SQUaLanE OLIvE OIL UnSaPOnIFIaBLES 2.06% MaSSO
BEURRE dE KaRITE BUTYROSPERMUM PaRKII BUTTER 0.47% MaSSO
dERMOFEEL TOCO 50 TOCOPHEROL 0.13% dR STRaETManS nOn gMO
qsp WaTER 53.99%
B SaTIaxanE Cx 930 xanTHan gUM 0.50% LaSERSOn
PaLMERa g995 v gLYCERInE 5.00% CQMaSSO
C WaTER 20.00%
d IMErCarETM 02K-s Or 04K KaOlIn 2.00% IMErys
SH219 SILICa/TIO2 2.00% SUnJIn
E PERFUME 0.20%
F BIOxan aCETaTE 130IU TOCOPHERYL aCETaTE 0.10% MaSSO
g PRESERvaTIvES TBd
H pH CORRECTOR TBd
TOTal 100.00%
ImerCare kaolin formulations_printing version:Layout 1 22/08/2013 11:12 Page 5
MaKE-uP BasE
Make-Up base with a SPF and control of matity. Kaolin to provide absorption, corrective effect, improve the wear of the make-up and reduce the
greasy effect of the oils of the formula.
Process:
£ disperse Structure xL premixed with glycerin/propylene glycol into water under mixing. Maintain the agitation until the gel is formed.
£ Warm phase a and B until 70°-80°C. add a in B under high shear mixing. Mix during 5 mn.
£ add the powder ImerCareTM 02K-S OR 04K under mixing, than add E.
£ When the t° is at 40°C, add F, g, H under mixing.
£ When it is at room t°C, adjust the pH to 5,5.
TradE naME ChEMICal naME %W/W suPPlIEr
EMULgIn vL 75 LaURYL gLUCOSIdE , POLYgLYCERYL-2, 3.50% COgnIS
dIPOLYHYdROxYSTEaRaTE, gLYCERIn
TEgOSOFT E PPg-15 STEaRYL ETHER 2.00% EvOnIK
a MYRITOL 318 CaPRYLIC/CaPRIC TRIgLYCERIdES 3.00% COgnIS
TEgOSOFT HP ISOCETYL PaLMITaTE 2.00% EvOnIK
ISOPROPYL PaLMITaTE 1.00% SIgMa aLdRICH
UvInUL MC 80 ETHYLHExYL METHOxYCInnaMaTE 1.00% BaSF
EUSOLEx OCR OCTOCRYLEnE 2.00% MERCK
WaTER 66.70%
B STRUCTURE xL HYdROxYPROPYL STaRCH PHOSPHaTE 5.00% naTIOnaL STaRCH
gLYCERIn 2.00%
PROPYLEnE gLYCOL 3.00%
C IMErCarETM 02K-s Or 04K KaOlIn 3.00% IMErys
E SUnPURO IRIdESCEnT gOLd TiO2/MICa 0.30% SUn
F EUxYL K702 PHEnOxYETHanOL,BEnzOIC aCId, 0.50% SCHULKE
dEHYdROxYaCETIC aCId,aQUa,
ETHYLHExYLgLYCERIn, POLYaMInOPROPYL
BIgUanIdE
g BELIdES nP BELLIS PEREnnIS ( daisy) FLOWER ExTRaCT 5.00% CLR
H PaRFUM TBd
I naOH (10%) SOdIUM HYdROxIdE TBd
TOTal 100.00%
MaGIC CC CrEaM
Colour Corrective Cream. Formula without silicones and organic Uv filters and non nano TiO2. Kaolin to provide absoprtion, corrective effect, long
wearing improvement, reduce the greasy effect of the oils and Uv filters of the formula.
Process:
£ disperse Carbopol into water by sprinkling on the surface of deionized water, without mixing, the polymer will wet out in a few minutes.
£ Mix until the gel is formed, than add satiaxane pre-dispersed in glycerin. Mix until the gel is homogeneous.
£ Warm phase a and B until 70°-80°C. add a in B under high shear mixing. add sodium hydroxyde. Mix during 5 mn.
£ add the paste C. Mix 5 mn.
£ add the powders d under mixing.
£ When the t° is at 50°C , add F.
£ Maintaining the mixing, add the other phases at 40°C.
£ When it is at room t°C, add phase L without under a very low shear, and adjust the pH to 5-5,5 depending on your preservative system
choice.
TradE naME ChEMICal naME %W/W suPPlIEr
EMULIUM dELTa CETYL aLCOHOL (and) gLYCERYL 3.50% gaTTEFOSSE
STEaRaTE (and) PEg-75 STEaRaTE
(and) STEaRETH -20
LanETTE O CETEaRYL aLCOHOL 0.50% BaSF
a LanOL 99 ISOnOnYL ISOnOnanOaTE 2.00% SEPPIC
CETIOL C5 COCO-CaPRYLaTE 4.50% BaSF
REFInEd gRaPE SEEd OIL 0.50% SOPHIM
BIOxan SF T50 TOCOPHEROL (MIxEd) 0.10% MaSSO
WaTER 64.65%
gLYCERInE gLYCERInE 5.00%
B CaRBOPOL ETd 2050 CaRBOMER 0.15% gaTTEFOSSE
SaTIaxanE Cx911 xanTHan gUM 0.30% UnIvaR
SOdIUM HYdROxYdE 0.30% C SFT85-CCTg 60% TiO2/SILICa/JOJOBa ESTER 8.00% SUnJIn
40% CaPRYLIC/CaPRIx TRIgLYCERIdES
E IMErCarETM 02K-s Or 04K KaOlIn 1.00% IMErys
SUnSHInE SPECTRa gOLd TiO2/SYnTHETIC FLUORPHLOgOPITE 0.20% MaPRECOS
F ExTRaIT ORIgInEL RaISIn BIO 5.00% gaTTEFOSSE
g FRESH Ka FRagaRIa vESCa LEaF ExTRaCT 0.50% BERKEM
H PaRFUM 0.60%
I PRESERvaTIvES TBd
J dERMOFEEL Pa3 0.10%
K BIOxan aCETaTE 130IU TOCOPHERYL aCETaTE 0.10% MaSSO
L SUgaR CaPSULES MagIC BROWn EnCaPSULaTEd IROn OxIdES 3.00% daITO KaSEI
M pH CORRECTOR TBd
TOTal 100.00%
ImerCare kaolin formulations_printing version:Layout 1 22/08/2013 11:12 Page 6
MaKE-uP BasE
Make-Up base with a SPF and control of matity. Kaolin to provide absorption, corrective effect, improve the wear of the make-up and reduce the
greasy effect of the oils of the formula.
Process:
£ disperse Structure xL premixed with glycerin/propylene glycol into water under mixing. Maintain the agitation until the gel is formed.
£ Warm phase a and B until 70°-80°C. add a in B under high shear mixing. Mix during 5 mn.
£ add the powder ImerCareTM 02K-S OR 04K under mixing, than add E.
£ When the t° is at 40°C, add F, g, H under mixing.
£ When it is at room t°C, adjust the pH to 5,5.
TradE naME ChEMICal naME %W/W suPPlIEr
EMULgIn vL 75 LaURYL gLUCOSIdE , POLYgLYCERYL-2, 3.50% COgnIS
dIPOLYHYdROxYSTEaRaTE, gLYCERIn
TEgOSOFT E PPg-15 STEaRYL ETHER 2.00% EvOnIK
a MYRITOL 318 CaPRYLIC/CaPRIC TRIgLYCERIdES 3.00% COgnIS
TEgOSOFT HP ISOCETYL PaLMITaTE 2.00% EvOnIK
ISOPROPYL PaLMITaTE 1.00% SIgMa aLdRICH
UvInUL MC 80 ETHYLHExYL METHOxYCInnaMaTE 1.00% BaSF
EUSOLEx OCR OCTOCRYLEnE 2.00% MERCK
WaTER 66.70%
B STRUCTURE xL HYdROxYPROPYL STaRCH PHOSPHaTE 5.00% naTIOnaL STaRCH
gLYCERIn 2.00%
PROPYLEnE gLYCOL 3.00%
C IMErCarETM 02K-s Or 04K KaOlIn 3.00% IMErys
E SUnPURO IRIdESCEnT gOLd TiO2/MICa 0.30% SUn
F EUxYL K702 PHEnOxYETHanOL,BEnzOIC aCId, 0.50% SCHULKE
dEHYdROxYaCETIC aCId,aQUa,
ETHYLHExYLgLYCERIn, POLYaMInOPROPYL
BIgUanIdE
g BELIdES nP BELLIS PEREnnIS ( daisy) FLOWER ExTRaCT 5.00% CLR
H PaRFUM TBd
I naOH (10%) SOdIUM HYdROxIdE TBd
TOTal 100.00%
MaGIC CC CrEaM
Colour Corrective Cream. Formula without silicones and organic Uv filters and non nano TiO2. Kaolin to provide absoprtion, corrective effect, long
wearing improvement, reduce the greasy effect of the oils and Uv filters of the formula.
Process:
£ disperse Carbopol into water by sprinkling on the surface of deionized water, without mixing, the polymer will wet out in a few minutes.
£ Mix until the gel is formed, than add satiaxane pre-dispersed in glycerin. Mix until the gel is homogeneous.
£ Warm phase a and B until 70°-80°C. add a in B under high shear mixing. add sodium hydroxyde. Mix during 5 mn.
£ add the paste C. Mix 5 mn.
£ add the powders d under mixing.
£ When the t° is at 50°C , add F.
£ Maintaining the mixing, add the other phases at 40°C.
£ When it is at room t°C, add phase L without under a very low shear, and adjust the pH to 5-5,5 depending on your preservative system
choice.
TradE naME ChEMICal naME %W/W suPPlIEr
EMULIUM dELTa CETYL aLCOHOL (and) gLYCERYL 3.50% gaTTEFOSSE
STEaRaTE (and) PEg-75 STEaRaTE
(and) STEaRETH -20
LanETTE O CETEaRYL aLCOHOL 0.50% BaSF
a LanOL 99 ISOnOnYL ISOnOnanOaTE 2.00% SEPPIC
CETIOL C5 COCO-CaPRYLaTE 4.50% BaSF
REFInEd gRaPE SEEd OIL 0.50% SOPHIM
BIOxan SF T50 TOCOPHEROL (MIxEd) 0.10% MaSSO
WaTER 64.65%
gLYCERInE gLYCERInE 5.00%
B CaRBOPOL ETd 2050 CaRBOMER 0.15% gaTTEFOSSE
SaTIaxanE Cx911 xanTHan gUM 0.30% UnIvaR
SOdIUM HYdROxYdE 0.30% C SFT85-CCTg 60% TiO2/SILICa/JOJOBa ESTER 8.00% SUnJIn
40% CaPRYLIC/CaPRIx TRIgLYCERIdES
E IMErCarETM 02K-s Or 04K KaOlIn 1.00% IMErys
SUnSHInE SPECTRa gOLd TiO2/SYnTHETIC FLUORPHLOgOPITE 0.20% MaPRECOS
F ExTRaIT ORIgInEL RaISIn BIO 5.00% gaTTEFOSSE
g FRESH Ka FRagaRIa vESCa LEaF ExTRaCT 0.50% BERKEM
H PaRFUM 0.60%
I PRESERvaTIvES TBd
J dERMOFEEL Pa3 0.10%
K BIOxan aCETaTE 130IU TOCOPHERYL aCETaTE 0.10% MaSSO
L SUgaR CaPSULES MagIC BROWn EnCaPSULaTEd IROn OxIdES 3.00% daITO KaSEI
M pH CORRECTOR TBd
TOTal 100.00%
ImerCare kaolin formulations_printing version:Layout 1 22/08/2013 11:12 Page 6
lOnG lasT FOundaTIOn
Long lasting colour and matt effect on skin. Kaolin to provide absorption, opacifying, matt effect and a long-lasting effect.
Process:
£ Prepare a pigment premix by blending phase C ingredients and homogenize until a uniform color is obtained with a three roll-mill.
£ Warm the phase a to 80°C
£ add C to a and mix until homogeneous
£ Mix ingredient B together and warm until 70°C
£ Slowly add phase B into phase a/C while increasing speed mixing (800 to 1100 rpm)
£ Increase mixing speed little by little while adding B.
£ add the powder d ImerCareTM 07K under mixing
£ add phase E only when the mixture is under 50°C (flash point of xiameter is 77°C)
£ Then add F and g.
TradE naME ChEMICal naME %W/W suPPlIEr
a aBIL EM 90 CETYL PEg/PPg-10/1 dIMETHICOnE 2.00% EvOnIK
ISOLan gI 34 POLYCgYCERYL-4 ISOSTEaRaTE 1.00% EvOnIK
JOJOBa (BUxUS CHInEnSIS) OIL 1.00%
LaBRaFaC CC CaPRYLIC/CaPRIC TRIgLYCERIdES 8.00% gaTTEFOSSE
TEgOSOFT OP ETHYLHExYL PaLMITaTE 1.50% dEgUSSa
xIaMETER PMx-200 dIMETHICOnE 1.00% dOW CORnIng
SILICOnE FLUId 5CST
PaRaCERa W80 Wax MICROCRYSTaLLInE Wax 1.20% PaRaMELT
TOCOPHERYL aCETaTE 0.90%
B WaTER 61.24%
gLYCERInE gLYCERInE 1.00%
SOdIUM CHLORIdE 1.00%
C Sa-C47051 TIO2 and dIMETHICOnE 6.00% MIYOSHI KaSEI
Sa-C331700-102 CI77492 and dIMETHCOnE 0.74% MIYOSHI KaSEI
Sa-C332199-102 CI77491 and dIMETHICOnE 0.41% MIYOSHI KaSEI
Sa-C335000-102 CI77499 and dIMETHICOnE 0.01% MIYOSHI KaSEI
Fz-3196 CaPRYLYL dIMETHICOnE 5.00% dOW CORnIng
d IMErCarETM 07K KaOlIn 3.00% IMErys
E xIaMETER® PMx-0245 CYCLOPEnTaSILOxanE 5.00% xIaMETERCYCLOPEnTaSILOxanE
F PRESERvaTIvES TBd
g FRagRanCE TBd
TOTal 100.00%
EyE COnTOur
Eye contour with a soft focus effect. Kaolin to provide opacifying, reduce the greasy effect of the oils of the formula.
Process:
£ add satiaxane pre-dispersed in glycerin in deionized water under mixing. Mix until the gel is homogeneous.
£ Warm phase a and B until 70°-80°C. add a in B under high shear mixing. Mix during 5mn
£ add the pre-homogenized phase d by sprinkling in the emulsion under mixing.
£ Maintain agitation until the t° reach 40°C, then add F g and H if necessary.
TradE naME ChEMICal naME %W/W suPPlIEr
BEaUTYdERM HP gLYCERYL STEaRaTE and CETEaRYL 6.00% IMPag
aLCOHOL and STEaRIC aCId and SOdIUM
LaUROYL gLUTaMaTE
vEgELIgHT COCOnUT aLKanES (and) COCO- 4.00% gRanT
CaPRYLaTES/CaPRaTES
a OLIvE OIL 3.55% BERTIn
PLanTEC OLIvE SQUaLanE OLIvE OIL UnSaPOnIFIaBLES 2.06% MaSSO
BEURRE dE KaRITE BUTYROSPERMUM PaRKII BUTTER 0.47% MaSSO
dERMOFEEL TOCO 50 TOCOPHEROL 0.13% dR STRaETManS nOn gMO
qsp WaTER 53.99%
B SaTIaxanE Cx 930 xanTHan gUM 0.50% LaSERSOn
PaLMERa g995 v gLYCERInE 5.00% CQMaSSO
C WaTER 20.00%
d IMErCarETM 02K-s Or 04K KaOlIn 2.00% IMErys
SH219 SILICa/TIO2 2.00% SUnJIn
E PERFUME 0.20%
F BIOxan aCETaTE 130IU TOCOPHERYL aCETaTE 0.10% MaSSO
g PRESERvaTIvES TBd
H pH CORRECTOR TBd
TOTal 100.00%
ImerCare kaolin formulations_printing version:Layout 1 22/08/2013 11:12 Page 5
TradE naME ChEMICal naME %W/W suPPlIEr
CERaPHYL 140 TaLC 61.40% aSHLand
ROnaFLaIR FInES BISMUTH OxYCHLORIdE 4.00% MERCK
a SUnTaLC LL TaLC and LaUROYL LYSInE 4.00% SUnJIn
IMErCarETM 07K KaOlIn 4.00% IMErys
SUnPMMa-x HEMISPHERICaL PMMa 4.00% SUnJIn
T80 LL TIO2/SIO2/JOJOBa ESTER/LaUROYL LYSInE 3.00%
B ManganESE vIOLET CI7742 15.00%
BLaCK 2 CI 77266 0.20%
OCTYLdOdECYL STEaROYL STEaRaTE 4.00%
SORBIC aCId 0.30%
C dERMOFEEL TOCO 50 nOn gMO 0.10%
FRagRanCE TBd
TOTal 100.00%
EyE shadOW
Long lasting colour with semi matt effect. Kaolin to provide sebum absorption, skin adhesion, opacifying effect, im-
prove the wear, reduce the migration of the colour.
Process:
£ Mix the white phase a and the phase B separately.
£ Mix phase a and B together until the mixing is homogeneous.
£ add the pre-homogenized phase C under mixing
£ Press into adequate molds.
ClassICal FaCE MasK
Purifying mask for oily skins. Kaolin to provide sebum and impurities absorption.
Process:
£ add actigum in deionized water and alcohol under mixing. Mix until the gel is homogeneous.
£ add ImerCareTM 2K by sprinkling in the gel under mixing.
£ add the other ingredients under mixing.
TradE naME ChEMICal naME %W/W suPPlIEr
WaTER 72.50%
a aCTIgUM vSx20 SCLEROTIUM gUM 0.50% CaRgILL LaSERSOn
ETHanOL dEB 100 ETHanOL 5.00%
B IMErCarETM 2K KaOlIn 20.00% IMErys
C CRILLET 1 POLYSORBaTE 20 1.00% CROda
d FRagRanCE 0.50%
E EUxYL K702 PHEnOxYETHanOL, BEnzOIC aCId, 0.50% SCHULKE
dEHYdROxYaCETIC aCId, aQUa,
ETHYLHExYLgLYCERIn,
POLYaMInOPROPYL BIgUanIdE
TOTal 100.00%
lOnG lasT lIPsTICK
Long lasting colour with a semi-matt effect. Kaolin to provide adhesion, oil retention, reduce the migration of colour and improve the
wear.
Process:
£ Prepare a pigment premix by blending phase C ingredients and homogenize until a uniform color is obtained with a three roll-mill.
£ Warm the phase a and B to 95°C and homogenize until all the waxes are perfectly melted.
£ add C to a and mix until homogeneous.
£ add powder ImerCareTM 02K-S under mixing maintaining the t°.
£ add phase E under mixing.
£ Then fill in adequate molds preheated at 50°C. Put in a fridge t° during 30mn.
TradE naME ChEMICal naME %W/W suPPlIEr
SOPHIM MC30 HYdROgEnaTEd POLYISOBUTEnE 13.45% SOPHIM
SCHERCEMOL 318 ESTER ISOPROPYL ISOSTEaRaTE 8.00% LUBRIzOL
a SOFTISan 645 BIS6dIgLYCERYL POLYaCYLadIPaTE-2 15.00% SaSOL
IndOPOL SCHERCEMOL POLYBUTEnE 5.00% InEOS OLIgOMER
TISC ESTER TRIISOSTERaYL CITRaTE 15.00% LUBRIzOL
MICROCRYSTaLLInE Wax 3.50% SOnnEBORn REFInEd
PROdUCTS
B EUPHORBIa CERIFERa (CandELLILa) Wax 6.00% STRaHL & PITCH
COPERnICa CERIFERa (CaRnaUBa) Wax 1.50% STRaHL & PITCH
OzOKERITE 2.50% KaHL & CO
TITanIUM dIOxIdE 0.20% SUn MaPRECOS
REd IROn OxIdES 4.50% SUn MaPRECOS
C REd 6 LaKE 1.50% SUn MaPRECOS
dC REd 7 LaKE REd 7 LaKE 0.60% SUn MaPRECOS
SOPHIM MC30 HYdROgEnaTEd POLYISOBUTEnE 13.20% SOPHIM
d IMErCarETM 02K-s KaOlIn 2.00% IMErys
E FLaMEnCO REd MICa , TIO2 8.00% BaSF
F aSCORBYL PaLMITaTE 0.05%
g FRagRanCE TBd
TOTal 100.00%
ImerCare kaolin formulations_printing version:Layout 1 22/08/2013 11:12 Page 4
naTural FaCE MasK
Purifying and hydrating mask for all skins with peg free emulsifiers. Kaolin to provide sebum and impurities absorption.
Process:
£ add satiaxane predispersed in glycerin in deionized water under mixing. Mix until gel is homogenous.
£ Warm phase a & B until 70-800C. add ain B under high shear mixing. Mix during 5mn.
£ add ImerCareTM 2K by sprinkling in the emulsion under mixing
£ Maintain agitation until t0 reach 400c, then add d, E, F and adjust pH if necessary.
TradE naME ChEMICal naME %W/W suPPlIEr
EMULgadE SE PF gLYCERYL STEaRaTE, CETEaRETH-20, 5.00% BaSF
CETaRETH-12, CETEaRYL aLCOHOL,
CETYL PaLMITaTE
a LanETTE O CETEaRYL aLCOHOL 1.00% BaSF
LaBRaFaC CC CaPRYLIC/CaPRIC TRIgLYCERIdES 5.00% gaTTEFOSSE
vEgELIgHT COCOnUT aLKanES (and) 5.00% gRanT
COCO-CaPRYLaTES/CaPRaTES
HUILE dE nOYaUx d'aBRICOTS PRUnUS aRMEnIaCa KERnEL OIL 1.00% BERTIn
BIOxan SF T50 TOCOPHEROL (MIxEd) 0.10% MaSSO
WaTER 76.80%
B gLYCERInE gLYCERInE 3.00% COPPER
SaTIaxanE Cx911 xanTHan gUM 0.40% UnIvaR
C IMErCarETM 2K KaOlIn 2.00% IMErys
d PERFUME 0.60%
E PRESERvaTIvES TBd
F dERMOFEEL Pa3 0.10%
g BIOxan aCETaTE 130IU TOCOPHERYL aCETaTE MaSSO 0.10%
H dE pH CORRECTOR TBd
TOTal 100.00%
MaTT dayCrEaM
natural formula daycream for oily skins for matt and purifying effect Kaolin to provide sebum control, matt effect and opacifying.
Process:
£ add satiaxane pre-dispersed in glycerin in deionized water under mixing. Mix until the gel is homogeneous.
£ Warm phase a and B until 70°-80°C . add a in B under high shear mixing. Mix during 5mn.
£ add the kaolin by sprinkling in the emulsion under mixing.
£ Maintaining the mixing, add the other phases at 40°C.
£ When it is at room t°C, adjust the pH to 5-5,5 depending on your preservative system choice.
TradE naME ChEMICal naME %W/W suPPlIEr
OLIvEM 1000 CETEaRYL OLIvaTE, SORBITan OLIvaTE 2.10% B&T COMPanY
OLIWax HYdROgEnaTEd OLIvE OIL and OLEa 0.77%
a EUROPEaE OLIvE FRUIT OIL and OLEa
EUROPEaE (OLIvE) OIL UnSaPIOnIFIaBLES
LanETTE O CETEaRYL aLCOHOL 0.35% BaSF
HUILE d’OLIvE 0.70% BERTIn
MYRITOL 318 CaPRYLIC/CaPRIC TRIgLYCERIdES 3.50% COgnIS
SEnSOLEnE ETHYLHExYL OLIvaTE 6.30% B&T COMPanY
dERMOFEEL TOCO 50 TOCOPHEROL 0.10% dR STRaETManS
nOn gMO
B WaTER 47.86%
PaLMERa g995 v gLYCERInE 5.00% CQMaSSO
SaTIxanE Cx911 xanTHan gUM 0.32% UnIvaR
C IMErCarETM 2K KaOlIn 30.00% IMErys
d ECOCERT PRESERvaTIvE TBd
E ETHanOL 3.00%
F FRagRanCE TBd
TOTal 100.00%
ExFOlIaTInG FaCE MasK
Purifying and exfoliating mask. Kaolin to provide sebum and impurities absorption.
Process:
£ disperse Carbopol into water by sprinkling on the surface of deionized water, without mixing, the polymer will wet out in a few minutes
£ add triethanolamine under mixing and mix until the gel is formed.
£ add Texapon under a slow mixing.
£ add ImerCareTM 2K by sprinkling in the gel under mixing and when dispersed add all the other ingredients.
TradE naME ChEMICal naME %W/W suPPlIEr
WaTER 75.70%
CaRBOPOL ULTREz 21 aCRYLaTES/C10-30 aLKYL 1.00% gaTTEFOSSE
a aCRYLaTE CROSSPOLYMER
TRIETHanOLaMInE 0.80%
B TExaPOn T42 TEa-LaURYL SULFaTE 15.00% BaSF
C IMErCarETM 2K KaOlIn 5.00% IMErys
d FLORaBEadS JOJOBa JOJOBa ESTERS 1.00% FLORaTECH
WHITE ESTERS
E FRagRanCE 0.50%
F PRESERvaTIvES QS
TOTal 100.00%
ImerCare kaolin formulations_printing version:Layout 1 22/08/2013 11:12 Page 3
KAOLIN is a naturally occurring hydrated aluminium silicate. Careful processing results in soft, fine particles suitable
for use in a variety of personal care products.
IMERYS kaolin reserves can be found in the United Kingdom, Brazil, USa and australia.
It is characterised as al2Si2O5(OH)4. Kaolin has a crystalline structure and has platey, hexagonal crystals.
The ImerCare™ kaolin portfolio offers cosmetics producers an unparalleled set of properties including absorption,
opacity, matting and softness. all of these attributes can be optimised to meet individual formulation requirements
through selective sourcing and processing control.
ImerCareTM
Kaolin formulations PrOduCTIOn OF sMOOThInG BOdy POWdEr FOr dry FlO Ts launCh
This body powder has an elegant and silky feel upon skin application. Kaolin to provide sebum absorption, soft touch
and improve the wear.
Process: Combine all ingredients, blend until uniform, package.
TradE naME InCI naME %W/W suPPlIEr
POWdEr PhasE
dRY-FLO® TS STaRCH TaPIOCa STaRCH 88.00% aKzOnOBEL gLOBaL
POLYMETHYLSILSESQUIOxanE PERSOnaL CaRE
IMErCarETM 2K hydrOus KaOlIn 5.00% IMErys
IMERCaRETM 3000M MICa 2.00% PRESPERSE InC.
KROnOS 1171 TITanIUM dIOxIdE E 171 2.00% KROnOS InTERnaTIOnaL
COLOROna® CaRMInE REd PIgMEnT 1.00% ROna CSP
TaPIOCa PURE STaRCH TaPIOCa STaRCH 2.00% aKzO nOBEL gLOBaL
PERSOnaL CaRE
TOTal 100.00%PhysICal PrOPErTIEs£ Whiteness, brightness with different tints
£ Opacity (refractory index 1.56)
£ acidic (ph 4-6)
£ Platey
£ White firing (specific grades)
£ hydrous Kaolin is hydrophilic
£ Good chemical resistance
MaIn PrOPErTIEs£ lamellar, platey structure (barrier effect)
£ rheology control, thixotropic effect
£ Opacity effect
£ Bulking effect
£ Chemical resistance, inertness
£ high whiteness & purity
£ soft touch
aPPlICaTIOns£ Make up
£ Mascara, eye shadow, eye contour
£ lipstick
£ CC Cream
£ hair care products
£ liquid foundations
£ Exfoliation face mask
£ Body powder
ImerCare kaolin formulations_printing version:Layout 1 22/08/2013 11:11 Page 2
With a unique knowledge of mineral technology, com-
bined with unrivalled depth of application expertise
IMERYS can select the most suitable grade to improve
the formulation of our customers’ products.
By enhancing what nature is providing, IMERYS can op-
timise many parameters such as particle size, particle
shape, particle packing, crystal microstructure, colour, ab-
sorbency and hardness. These transformations can
change depending on the properties that the cosmetic
industry requires, such as opacity, matting, gloss, absorp-
tion, rheology, abrasiveness and barrier coatings.
For example, Imerys mineral products can now be
processed under conditions which allow us to assure typ-
ical industry requirements on microbiology. The new
ImerCare 04K illustrates this principal as it applies to
Kaolin.
With a range of more than 25 different natural minerals
in its portfolio, IMERYS is the world leader in industrial
minerals. Its uncomparable expertise allows the company
to explore and develop new natural mineral based prod-
ucts for the personal care industry.
In addition to kaolin, the ImerCareTM range also includes
the following minerals:
PERLITEPerlite products are made from a
volcanic glass which contains water in
its inner structure. When heated
rapidly, the steam produced expands the
glass to form a foamed structure, which
can be used, when processed in fine controlled
particles, in many different personal care products.
The ImerCareTM “P” range perfectly meets high
purity, high absorption, excellent matting effect and
gentle abrasiveness requirements.
DIATOMACEOUS EARTHdiatomaceous Earth is a mineral
material consisting chiefly of
siliceous fragments of various
species of fossilized remains of
diatoms. It is divided into
categories based on its source;
freshwater or saltwater. Freshwater
diatomaceous Earth is mined from dry lake beds and
Saltwater diatomaceous Earth is mined from dry sea
beds.
The ImerCareTM “d” range meets high absorption,
excellent matting effect and gentle abrasiveness
requirements.
MICAMica under ImerCareTM “M” is a
naturally occurring silicate
mineral that is widely distributed
in different types of rock.
Mica often occurs as flakes, scraps or sheets and has been
used by humans since prehistoric times.
The true value of mica is in its unique physical properties.
Its highly delaminated sheets are platy, flexible, elastic
and can be transparent to opaque.
Muscovite mica can be incorporated in the formulations
of many cosmetics.
addIng vaLUE THROUgHnaTURaL MInErals
ImerCareTM KaolinFOR COSMETICS
Par Moor Centre, Par Moor Road, Par, Cornwall PL24 2SQ, UK
Tel: +44 1726 818000 Fax: +44 1726 811200
PMFE
/PC
O0
03
- F
irst
Edi
tion
- 0
4/13
|
For more information on the ImerCare range or to speak to our local
dedicated distribution network please visit the website:
www.imerys-perfmins.com
ImerCare kaolin formulations_printing version:Layout 1 22/08/2013 11:06 Page 1