125124

IL2 PLUS

Light line system

Everything that pleases lighting professionals

The modular LED light line system IL2 PLUS offers the advantages of decades of experience,

available for the first time for industry and retail applications. IL2 PLUS provides constant

light quality, homogeneous illumination and optimally adjustable light distribution in logistics,

industrial and manufacturing buildings, supermarkets, warehouses and high-bay warehouses.

The LED module provides an effective luminous flux of 3,300 lm and 4,000 lm with 28 W and

34 W of system power, respectively.

The light emitted is controlled precisely through patented optics, keeping unavoidable light

losses to an absolute minimum. IL2 PLUS also provides high efficiency, energy savings, low

investment and TCO (total cost of ownership). The LED light line system is particularly cost-

effective due to its low power consumption. It is environmentally friendly due to reduced

CO2 emissions. Simple installation is time- and cost-effective, using preassembled support

rails and tool-free maintenance. The durability of the system is demonstrated by the fact that

even after an average life of 60,000, the lamp still provides 80 % residual luminous flux.

A five-year module warranty is provided, proving the superior quality of the IL2 PLUS system.

We can guarantee continuous innovation and further development of the modular system,

20 years’ replacement parts availability and module exchange at any time using the most

up-to-date modules.

127

A highly flexible LED light line system. The modular construction

and design consists of an aluminum rail, LED module and

electronics. This is precisely tailored to industrial and retail needs.

Cost-efficient through efficient power consumption. Simple,

tool-free installation and maintenance. Non-electricians can

exchange modules after installation. There is sufficient space

for further wiring in the upper part of the wiring conduit. Freely

selectable phase arrangement of the light band per light point.

Uniform illumination and customized light distribution using

various available optics. In addition: Five-year module warranty,

a guaranteed average lifespan of 60,000 hours, and 20 years

replacement parts availability.

FACTS AND DATA

ELECTRONICS

Luminaire type LED module, each with 104 LEDs

Driver Optionally 1–10 V dimming or DALI

Mains connection 220–240 V/50–60 Hz

Sensors Optionally with daylight sensor and/or presence detector

Protection class Class I

Power consumption3,300 lm: 28 W4,000 lm: 34 W

Power factor ≥ 0.95 c

Surge voltage withstand capability

4 kV

LIGHT TECHNOLOGIES

System luminous flux 3,300 lm or 4,000 lm

Luminous flux over lifetime80% nach 60,000 operating hours(according to IES LM 80 & TM 21)

Color temperature 3,000/4,000/6,500 K

Color rendering index > 80

Optics

N optics: Narrow light distributionW optics: Wide light distributionD optics: Double-asymmetrical light distributionXN optics: Very narrow light distribution

ADDITIONAL DATA

Ambient temperature range3,300 lm: -25°C to +45°C4,000 lm: -25°C to +40°C

Dimensions (L x W x H)LED module: 592 x 72 mmSupport rail: 0.6 m/1.20 m/3.00 m or 4.20 m length, 600/1,200/3,000/4,200 x 90 x 85 mm

Weight per 0.6 m2.2 kg in case of complete module assembling,1.3 kg without module

MaterialsSupport rail made of aluminum, lens made of PMMA, covering made of PP

Mounting Mounting by suspension on support rails

IP certification (Luminaire) IP 20/ IP 40/ IP 54

ColorSupport rail aluminum colored, glossy whitesimilar to RAL 9016, gray similar to RAL 9007or matt black similar to RAL 9017

Certification

Efficiency class

IL2 PLUS

Light line system

128

LIGHT DISTRIBUTIONS

IL2 PLUS

D optics

Double-asymmetrical light distribution.Specific illumination of shelves.Optimized for supermarkets.

W optics

Wide light distribution.Very homogeneous illumination evenwith large distances between lightbands and low mounting heights.

N optics

Narrow light distribution.Optimized for high mounting heights,e. g. production or logistic halls.

Mounting height: 7 m Mounting height: 4 m Mounting height: 2.6 m

XN optics

Very narrow light distribution.Optimized for high-bay storagesand very high mounting heights.

Mounting height: 12 m

Irapuato | Mexico

131

IL2 PLUS | ACCESSORIES

Presence detector and constant light control

ELECTRONICS

Implementation Presence detector

Sensor type Passive-infrared

Interface 1 – 10 V or DALI (Broadcast)

Dimming1 – 10 V: 10 – 100 %DALI: 10 – 100 % (switching off possible)

Protection class Class II

Connection Plug contact for IL2 PLUS supporting rails

Number of controllablelight points

1 – 10 V: Max. 50 EVGsDALI: Max. 12 EVGs

INSTALLATION DATAPresence detector

to 8 mPresence detector

to 10 m

Max. installation height 2.5 m to 8 m 2.5 m to 10 m

Presence detection square Max. 4 x 4 m (16 m²) Max. 8 x 8 m (64 m²)

Tangential detection square Max. 7 x 7 m (49 m²) Max. 20 x 20 m (400 m²)

Radial detection square Max. 5 x 5 m (25 m²) Max. 8 x 8 m (64 m²)

Light sensor working area 100 – 1,000 lx

ConfigurationConfiguration directly on the presence detector,

remote control optional

Sensors13 detection levels,1,760 switching zones

13 detection levels,4,800 switching zones

Where deployed Building interiors

ADDITIONAL DATA

Dimensions (L x W x H) 180 x 130 x 95 mm

Weight 310 g

Ambient temperature range -25°C to +40°C

IP certification IP 20 / IP 54

Certification

Daylight sensor Yes

Infrared presence detector and daylight sensor. Very sensitive

sensors react to movements and light conditions, adjusting

lighting automatically. The sensor can capture the smallest

movements with its sophisticated lens in a typical, square

detection area.

Four available versions: DALI to 8 meters, DALI to 10 m,

1 – 10 V to 8 m or 1 – 10 V to 10 m.

Y Direct installation into the IL2 PLUS supporting rail with

automatic contacts from 1 to 10 V or the DALI interface

Y Plug and play system, no need for additional

installation material

Y 1,760 to 4,800 switch zones for maximum recording quality

Y Easy adjustment to the respective deployment situation

Y Optional remote controls provide convenient installation

and control

Y Energy-savings

FACTS AND DATA

133

IL2 PLUS | ACCESSORIES

Daylight sensor

ELECTRONICS

Sensor type Daylight sensor

Interface 1 – 10 V

Protection class Class II

Connection Plug contact for IL2 PLUS supporting rails

Number of controllablelight points

Max. 80 driver

INSTALLATION DATA

Max. installation height 8 m

Sensor registration area Cone shaped, approx. 90° beam angle

Sensor operation range 20 – 800 lx

Nominal value setting Through potentiometer

ADDITIONAL DATA

Dimensions (L x W x H) 175 x 80 x 75 mm

Weight 185 g

Sensor Makrolon / Polycarbonat

Housing PPT40

Ambient temperature range 0 – 40°C

IP certification IP 20 / IP 54

Certification

Daylight sensor for IL2 PLUS tracks. The sensor measures

the brightness of the workspace and adjusts the emitted light

intensity. The nominal value is adjustable. Increasing daylight

decreases the amount of artificial light.

Y Easy to mount in IL2 PLUS tracks (Plug & Play)

Y Direct contacting to the 1 – 10 V interface

Y Nominal value setting through potentiometer

Y Energy saving

FACTS AND DATA

135134

IL2 PLUS

References

Lippstadt | Germany

Erwitte | Germany

Bielefeld | Germany

Bielefeld | Germany

Jiaxing | China

Oberhausen | Germany

Dortmund | Germany

Dortmund | Germany

Steinhagen | Germany

Ljubljana | Slovenia

HELLA KGaA Hueck & Co.

HELLA INDUSTRIES

Rixbecker Straße 75

59552 Lippstadt /Germany

Tel. + 49 2941 38 - 32818

Fax + 49 2941 38 - 47 32818

industries@hella.com

www.hella-industries.com

© HELLA KGaA Hueck & Co., Lippstadt

9Z2 999 135-066 SCH/09.14/3.0

Printed in Germany

Subject to technical modifications.

Issue 09 / 2014

www.hella-industries.com