Upload
austin
View
29
Download
0
Tags:
Embed Size (px)
DESCRIPTION
IEEE EAB Teacher In-service Program Presentation. Museum of Science, Boston Ralph Painter, Florida West Coast Section Douglas Gorham, IEEE Educational Activities. 24 March 2006. IEEE Quick Facts. More than 365,000 members, including 68,000 students, in over 150 countries. - PowerPoint PPT Presentation
Citation preview
IEEE EAB Teacher In-service Program Presentation
Museum of Science, Boston
Ralph Painter, Florida West Coast Section Douglas Gorham, IEEE Educational
Activities
24 March 2006
IEEE Quick Facts More than 365,000 members, including 68,000
students, in over 150 countries. 311 Sections in ten geographic regions worldwide. About 1,450 chapters that unite local members with
similar technical interests. More than 1,300 student branches at colleges and
universities in 80 countries. 39 societies and 5 technical councils representing
the wide range of technical interests. 128 transactions, journals and magazines. More than 300 conferences worldwide each year. About 900 active IEEE standards and more than 400
in development. Volunteerism is a core value of IEEE
Workshop Objectives To promote an awareness of the need for
technological literacy To provide a hands-on demonstration of
mathematics, engineering, and technology for classroom use
To promote awareness of the connections between mathematics, science, and technology standards
To provide information about resources available to support mathematics, science, and technology instruction
What is Technological Literacy?
Technological literacy is the ability to use, manage, assess and understand technology. (STL, 2000, p. 242)
Change is a ubiquitous feature of contemporary life, so learning with understanding is essential to enable students to use what they learn to solve the new kinds of problems they will inevitably face in the future. (PS, 2000, p. 20-21)
Students’ work with scientific investigations can be complemented by activities in which the purpose is to meet a human need, solve a human problem, or develop a product…(NSES, 1996, pg. 161)
Key Ideas Technology is the modification of the natural
world in order to satisfy perceived human needs and wants (ITEA, STL, p. 242).
Technology is essential in teaching and learning mathematics; it influences the mathematics that is taught and enhances students’ learning (PS, p. 11).
Any presentation of science without developing an understanding of technology would portray an inaccurate picture of science (National Research Council, National Science Education Standards, p. 190).
“Technically Speaking” Report
“As a society, we are not even fully aware of or conversant with the technologies we use every day. In short, we are not ‘technologically literate.’ “
Source: NAE. (2002). Technically Speaking: Why All Americans Need to Know More About Technology. p. 1. Washington, DC: National Academy Press.
Percentage of Science Degrees Awarded
41.8
36
32.4
18.4
15.6
39.5
31.5
24.2
15.9 15
38.4
31
25.9
15.7
14.9
05
101520253035404550
1999 2001 2002
South Korea
Germany
Czech Rep.
USA
Norway
Science degrees include life sciences, physical sciences, mathematics, statistics, computer sciences, engineering, manufacturing, and building
Source: Organization of Economic Cooperation and Development
Rotational Equilibrium: A Question of Balance
Museum of Science, Boston
Ralph Painter, Florida West Coast Section Douglas Gorham, IEEE Educational
Activities24 March 2006
Principles & Standards for School Mathematics
Data Analysis and Probability: Formulate questions that can be addressed with data and
collect, organize and display relevant data to answer them Develop and evaluate inferences and predictions based
on data Algebra:
Understand patterns, relations, and functions; Represent and analyze mathematical situations and
structures using algebraic symbols; Use mathematical models to represent and understand
quantitative relationships; Analyze change in various contexts.
National Science Education Standards
Standard A: Science as Inquiry: Abilities necessary to do scientific inquiry Understandings about scientific inquiryStandard B: Physical Science: Understanding of motions and forces Interactions of energy and matterStandard E: Science and Technology Abilities of technological design Understandings about science and technology Communicate the process of technological designStandard K-12: Unifying Concepts and Processes Evidence, models, and explanations
Standards for Technological Literacy
Students will develop an understanding of… Standard 8. the attributes of design. Standard 10. the role of troubleshooting,
research and development, invention and innovation, and experimentation in problem solving.
Students will develop… Standard 11. the abilities to apply the design
process.
Rotational Equilibrium- Step One
Prepare the materials
Cut 36-inch balsa into three 31 cm (310 mm) pieces.
Rotational Equilibrium- Step One
Mark each piece at the center, 0 cm and 30 cm.
Tie a slip knot and make a loop in one end of the thread.
“Lasso” a piece of balsa. Snug the loop at the center point.
Rotational Equilibrium- Step One
Hold the piece up to see if the balsa stick balances. If not, balance the piece with small pieces of tape.
Repeat the balance test for each piece of balsa.
Rotational Equilibrium- Step One
Make the weights
Secure two pennies to one side of an index card using cellophane tape.
Fold the index card in half with the pennies on the inside.
Close the index card with tape.
Rotational Equilibrium- Step One
Make a loop in one end of the thread using a slip knot. Cut the thread about 4 to 6 inches (10 to 15 cm) long so there is a loop on one end.
Attach the straight end of the thread to a weight with a small piece of tape
Repeat for all four weights
Rotational Equilibrium- Step One
Attach a weight to each end of a balsa stick and snug the loops at the 0 cm and the 30 cm marks.
This piece is the bottom beam of the mobile.
Rotational Equilibrium- Step One
Attach a single weight to one end of a balsa stick and snug the loop at the 0 cm mark.
This piece is the middle beam of the mobile.
Make another just like it for the top beam.
Rotational Equilibrium- Step One
Assemble the mobile.
Attach the string at the center of the bottom beam to the free end of the middle beam.
Attach the string at the center of the middle beam to the free end of the top beam.
Rotational Equilibrium- Step Two
Predict the balance points for each of the beams by summing torques (or “moments”) about the balance point of each beam.
This sounds difficult, but is actually very simple!!
Rotational Equilibrium- Step Two
Rotational Equilibrium- Step Two
For the bottom beam:
Rotational Equilibrium- Step Two
For the bottom beam:
W X = W Y, Therefore, X = Y
Also,
X + Y = 300 mm. So, by substitution,
X + X = 300 mm, or 2 X = 300 mm.
Therefore X = 150 mm and Y = 150 mm
Rotational Equilibrium- Step Two
For the middle beam:
Rotational Equilibrium- Step Two
For the middle beam:
2W X = W Y. Therefore, 2X = Y.
Also,
X + Y = 300 mm. So, by substitution,
X + 2X = 300 mm, or 3 X = 300 mm.
Therefore X = 100 mm and Y = 200 mm
Rotational Equilibrium- Step Two
For the top beam:
Rotational Equilibrium- Step Two
For the top beam:
3W X = W Y. Therefore, 3X = Y.
Also,
X + Y = 300 mm. So, by substitution,
X + 3X = 300 mm, or 4 X = 300 mm.
Therefore X = 75 mm and Y = 225 mm
Rotational Equilibrium- Step Three
Mark the predicted balance points on each beam.
Move the support threads to the predicted balance points.
Rotational Equilibrium- Step Three
Raise the mobile, one beam at a time.
Adjust the positions of the support threads as needed to achieve actual balance.
Record your results
Rotational Equilibrium- Step Four
Analyze your results
Did the mobile balance at the predicted points?
Why or why not?
Rotational Equilibrium- Step Five
The method we used for solving the system of equations is called “substitution.”
The lesson plan also solves the problem graphically and by the method of determinants.
Reflection What was one thing you liked about your design? Are there algebraic principles that can be applied
to this activity? Are there geometric principles used in this
activity? What is one thing you would change about your
design based on your experience? How might you incorporate this activity into your
classroom instruction?
ZOOM INTO ENGINEERING Students explore and experiment with
basic engineering principles through fun, hands-on activities
A focus on problem solving and inquiry-based learning
Grades K-5 Aligned with education standards Activity guide available www.asce.org/kids
BUILDING BIG
A focus on problem solving and inquiry-based learning
Grades 6-8 Aligned with education standards Includes a ‘Hands On Glossary’ of
engineering terms Activity guide available www.asce.org/kids
IDEAS
Alternative Energy - Wind Powered Machines Amusement Park And Playground Physics Buoyant Vehicles Geodesic Domes And Sheltering Structures Historical Catapults Investigating Isaac’s Ideas Slow Roller And Friction Experiments
Low-Cost, “Hands-On” Engineering Projects For Low-Cost, “Hands-On” Engineering Projects For Middle School Math, Science And TechnologyMiddle School Math, Science And Technology
www.asme.org/education/precollege/www.asme.org/education/precollege/
Engineers: Who They Are And What They Do The Wonderful World Of Gears Why Do Planes Fly? Amusement Park Roller Coaster How Tall Is That Flagpole Anyway? Waste Not, Want Not - How To Get Rid Of Your
Garbage Ethics For Students
ENGINEERS SOLVE PROBLEMS
Includes Lesson Rationale, Objectives, Lesson Plan And Enrichment Activities
TEACHER IN-SERVICE PROGRAM
Engineers Develop and Present Technologically Oriented Topics To Pre-College Educators Includes Practical, Applicable, Hands-On
Activities Promotes Mathematics, Science and
Technological Literacy 15 Lesson plans available in English and
Spanish at: http://www.ieee.org/web/education/preuniversity/tispt/lessons.html
IEEE VIRTUAL MUSEUM
IEEE History Center Outreach Project for Educators, Parents and Students Age 10-18
Examines History of Technology Demonstrates How Various
Technologies Work Increases Understanding of the
Impact of Engineering and Technology on Society
WEBSITE RESOURCES IEEE-
www.ieee.org/organizations/eab/precollege ACS- www.acs.org/edresources.htm ASCE- www.asce.org/kids Virginia Tech- www.teched.vt.edu/ctte Texas- www.texastechnology.com NASA-
http://aesp.nasa.okstate.edu/florida NCTM- www.nctm.org ITEA- www.iteawww.org
WEBSITE RESOURCES CONT’D
ASME- www.asme.org/education/precollege/
NAE- www.nae.edu/techlit Project Lead The Way- www.pltw.org APS- www.aps.org NSTA- www.nsta.org SAE- www.awim.sae.org www.gettech.org www.library.advanced.org/11686/
Contact InformationIEEE
Ralph [email protected]
Douglas [email protected]
Allison [email protected]
ASCEJane Howell
Marina [email protected]