Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
I d e n t i f i c a t i o n S o l u t i o n s
202
I d e n t i f i c a t i o n S o l u t i o n s
Page
5.1 Printable Marking Systems 204 - 221
5.2 Pre-Termination Cable Marking 222 - 226
5.3 Post-Termination Cable Marking 227 - 228
5.4 Adhesive Labels 229
5.5 Identification Cable Ties 230 - 233
5.6 Security Seals 234 - 235
5
203
P r i n t a b l e M a r k i n g S y s t e m s
I d e n t i f i c a t i o n S o l u t i o n s
5.1
204
Stainless Steel Printing System• M-BOSS System
Features and Benefits
M-BOSS stainless steel (S316) markers are used to identify
cables and pipes in all areas where severe environmental,
mechanical or chemical conditions occur; e.g. offshore /
petrochemical industry, shipbuilding, railways,and mining.
The 4mm high characters are marked with a computer
driven stainless steel embossing machine with supplied
software. A range of 4 marker sizes is now available;
10 characters with 60 mm tags, 15 characters with 80 mm
tags, 20 characters with 100 mm tags. Also available is a
double line option to create a maximum of 40 characters
with a wider 100 mm tag. Each of these sizes have 2
available marker designs. A bridge version that is applied
to pipes with HellermannTyton metal cable ties up to 8mm
wide, and a rivet version which is used to mark flat surfaces.
Each pack comes with 200 blank markers. The M-Boss
Printer is easy to install and run, and is both quiet and clean.
The electrically driven system can operate from an ordinary
office power source; there is no need for an air supply.
The printer is able to work on offshore platforms using a
60Hz power source. As the markers are embossed, there
is no metal waste or metallic dust. The supplied M-BOSS
Cassette of 10 markers is palm sized. The cassette is used
for marker production and can then be taken by installers to
their place of work. The marked strips can be “fanned out”
from the magazine so enabling the installer to quickly
identify which marker is needed.
The standard Printer has a 42 piece character set:
Letters: A B C D E F G H I J K L M N O P Q
R S T U V W X Y Z
Numbers: 0 1 2 3 4 5 6 7 8 9
Symbols: & - / . , '
Article No. Type Pack Contmax.(G)
øDCharacters
Width (W) Length (L)
540-10000 M-Boss 1 – – 830 700
540-10008 MBC 10X60 20 cassettes 8 – 10 10 60
540-10009 MBC 10X80 20 cassettes 8 – 15 10 80
540-10001 MBC 10X100 20 cassettes 8 – 20 10 100
540-10010 MBC 14X100 20 cassettes 8 – 40 14 100
540-10040 MBCR 10X60 20 cassettes 8 3.5 10 10 60
540-10041 MBCR 10X80 20 cassettes 8 3.5 15 10 80
540-10042 MBCR 10X100 20 cassettes 8 3.5 20 10 100
540-10043 MBCR 14X100 20 cassettes 8 3.5 40 14 100
M-Boss
Power Supply Electrical
Cycle Time 15 sec. for 20 character tag
Weight 78kg
L x H x W 700 x 420 x 830mm
System Requirements Windows 2000 & XP
Material Data Table
Material Stainless Steel (SS316)
Colour 15 sec. for 20 character tag
Operating 78kg
Material Data Table
The M-BOSS System.
Patent Nos:
GB2470507 and
GB2425646
Strap Width Number of
P r i n t a b l e M a r k i n g S y s t e m s P r i n t a b l e M a r k i n g S y s t e m s
I d e n t i f i c a t i o n S o l u t i o n s
5.1
205
Article No. Type Pack Contmax.(G) Characters
Width (W) Length (L)
540-20000 M-BOSS Lite 1 4.6 – 260 650
540-20005 MBML10X45 1000 4.6 8 10 45
540-20004 MBML10X90 500 4.6 23 10 90
540-20002 MBML20X45 1000 4.6 24 20 45
540-20001 MBML20X90 500 4.6 69 20 90
M-Boss Lite
Power Supply Electrical
Cycle Time 15 sec. for 20 character tag
Weight 78kg
L x H x W 700 x 420 x 830mm
System Requirements Windows 2000 & XP
Material Stainless Steel (SS316)
Colour 15 sec. for 20 character tag
Operating 78kg
Space-saving and easy to use: M-BOSS Lite stainless steel embossing system.
Space-saving and easy to use: M-BOSS Lite stainless steel embossing system.
Patent Pending
Stainless Steel Printing System• M-BOSS Lite System
Features and Benefits
M-BOSS Lite is the ideal stainless steel marker
plate embossing printer for low to medium
volume users. Printing speed is very
quick;
• MBML10X45 printed with 8 characters in under 10 seconds
• MBML20X90 printed with 69 characters in less than a minute
The printer is small enough to install in most premises as it is
desktop in size, uses a standard electrical supply and only weighs
35kg. The supplied software is quick to load and easy to use.
The marine grade stainless steel marker plates are designed to
survive in harsh and hazardous environments where wind, wave
and salt spray conditions are an important factor. M-BOSS Lite is
used for identifying pipes and cables in Offshore Platforms,
Refineries, Floating Production Storage – Offloading (FPSO), as
well as Rail Infrastructure, Utilities, Food, and Solar Farms.
HellermannTyton provides arrange of premium quality cable ties
to fix the embossed marker plates. Simply use 4.6mm width MBT
cable ties and a MK9SST hand tool to securely fix the marker plate
to the cable.
The printer is delivered with the following
42 piece 4mm character set:
Letters: A B C D E F G H I J K L M N O P Q
R S T U V W X Y Z
Numbers: 0 1 2 3 4 5 6 7 8 9
Symbols: & - / . , '
The standard Printer has a 42 piece character set:
Letters: A B C D E F G H I J K L M N O P Q
R S T U V W X Y Z
Numbers: 0 1 2 3 4 5 6 7 8 9
Symbols: & - / . , '
Power Supply 230 Volt/50 Hz
Cycle Time 1Just under 1 second per character
Weight 35 kg
L x H x W 50 x 500 x 260 mm
System Requirements Windows 2000 & XP
Material Data Table
Material Stainless Steel (SS316)
Colour Metal (ML)
Operating -80 °C to +538 °C
Material Data Table
Strap Width Number of
P r i n t a b l e M a r k i n g S y s t e m s
I d e n t i f i c a t i o n S o l u t i o n s
5.1
206
TT4000+ Printer
• Tough metal construction chassis made of dye-cast
aluminum especially designed for the most demanding
applications
• 300 dpi printhead
• Prints labels (TAG…), heatshrink (TCGT, TULT, TLFX),
TIPTAGS and non-heatshrink sleeving (TLFPT)
• New spring-loaded print head with a user-friendly
pressure control ensures even printing
• USB 2.0 High Speed Slave interface for standard
connection to the PC
• USB cable and Tagprint Pro software included
with a PC
Order code – TT4000+UK
Tagprint Pro software
• Windows based label design assistant makes designing
your own identification easy
• Simple serial number creation and import from existing
schedules
• Bar code 128, 39 and data matrix ECC-200
(2 dimensional).
• Easy creation of new templates
• Graphics, constant text and automatic date insertion
– all pre loaded plus ability to import new graphics
System requirements
3 Windows 98/NT/2000/XP/VISTA
3 IBM PC, PS/2 compatible (min 486 processor)
3 VGA-Graphic card and mouse operation via Windows
3 32 MB RAM (recommended)
Order Code (when bought separately)
TAGPRINTPRO2.0 CD
TT4000 Printer with cutter attached
Tagprint Pro Software
P r i n t a b l e M a r k i n g S y s t e m s P r i n t a b l e M a r k i n g S y s t e m s
I d e n t i f i c a t i o n S o l u t i o n s
5.1
207
Thermal transfer printer
• TT420+ Entry Level Printer
The TT420+ is an entry-level thermal transfer printer
perfectly suited for small to medium volume print runs.
The printer is specifically designed to run HellermannTytons
standard range of materials (see supported media). Its’ robust
double-walled cover protects the inner mechanism against
dust and external damage and is equipped with a high quality
long-life thermal print head which can print 25 km of adhesive
labels. As the TT420+ is compact and light, it can be installed
immediately in any convenient place and can also be simply
moved from workstation to workstation. The external reel holder
(Caddy) is provided within the scope of delivery. Creation of
professional looking industrial identification is simplified by the
use of HellermannTytons label creation software Tagprint Pro.
The software is both intuitive enough to quickly create basic
printing and has enough features to satisfy the most
demanding customer needs.
Application
The TT420+ has nearly no limit when it comes to suitable
applications. It can be used for identification of goods in the
logistics area, marking of cables and harnesses in the electrical
industry and leisure activities such as tickets at the cinema or
entertainment park.
Thermal transfer printer (TT420+).
Print Method Thermal Transfer
Print Head Type 300 dpi, flat type
Print Speed up to 76 mm/sec.
Max. Print Width 108 mm
Maximum Print Length 609 mm
Printer Interfaces Serial- Parallel port, USB
Supported Barcodes, Standard and 2D
Printer
L x H x W 314 mm (L) x 188 (H) x 213 (W)
Printer Memory 2 MB RAM
Weight 2.8 kg
Thermal Transfer printer TT420+
Shrinkable Wire Markers
Ladder Style –ShrinkTrak
Cable Bundle Tags
Ladder Style – TIPTAG VA
Self Laminating Wire Markers
Adhesive Labels – Helatag 320, 322, 1209
Adhesive Labels -
Helatag 823, 1203, 1204, 1205, 1206,
1208, 1210, 1211, 1212, 1213,
Recommended Media
Supported�Consumables
Article-No. Type Qty
556-00420 TT420+ 1
Technical TableThe thermal transfer technology is ideally
suited for precise printing results of bar
codes or graphical icons
P r i n t a b l e M a r k i n g S y s t e m s
I d e n t i f i c a t i o n S o l u t i o n s
5.1
Ease of use - Step by Step Guide
Please note! Not all products listed on this page
may have this approval. For product specific
approvals please refer to the Appendix.
Step 1Bend liner at side slit
Step 2Pull marker awayfrom the liner
Step 3ShrinkTrak applied
Material
Colour
Shrink Ratio
Min Shrink
Operating
Recommended
Dielectric Strength
Certification
Polyolefin, cross-linked (POX)
Black (BK), Yellow (YE), White (WH)
3:1
+90 °C
-55 °C to +135 °C
TTRO/TTRX
19,7 kV/mm
UL-224 as +125C, 600V (VW-1), SAEAS81531
, AMS-DTL-23053/5 Class 1 and 3, CE
Material Data
ShrinkTrak ladderstyle markers with side slits for easy application
Shrinkable Wire Markers:
“Ladder Style”, Thermal Transfer
ShrinkTrak
Features and Benefits
HellermannTyton’s ShrinkTrak 3:1 ratio heat shrinkable markers
make it easy to identify wire and cable. The ladder-style function
has been designed to enhance the user’s ability to pick markers
off the carrier. The side slits have been specifically designed to
ensure that the wire entry gap is as large as possible whilst
remaining on the carrier strip. This enables the user to quickly
insert wire and cable into the marker. For a complete labelling
solution, ShrinkTrak can be printed using HellermannTyton’s
Tagprint Pro professional label creation software, thermal
transfer printers and ribbons to create a permanent print which
is resistant to most solvents when shrunk and applied.
Versatile
• Flexible, flame retardant, heat shrinkable
polyolefin material is used to manufacture
these easy to use markers
• 3:1 shrink ratio enables a wide range of
wire sizes to be covered
• Standard colours - yellow, white and black
• Larger pack options result in less box
changes
Thermal Transfer Printer
208
P r i n t a b l e M a r k i n g S y s t e m s P r i n t a b l e M a r k i n g S y s t e m s
I d e n t i f i c a t i o n S o l u t i o n s
5.1
Thermal Transfer Printer
1 marker per row
Technical Table
HST 3-1 (3mm supplied, 1mm recovered)
Markers per Pack ContArticle-No. Type Colour row Length (L) (pcs)
553-50002 HST3-1WH White (WH) 1 48 250
HST 4-8 3-1 (3mm supplied, 1mm recovered)
553-50009 HST4.8-1.6WH White (WH) 1 48 250
HST 6-2 3-1 (3mm supplied, 1mm recovered)
553-50016 HST6-2WH White (WH) 1 48 250
HST 1-2-4 (3mm supplied, 1mm recovered)
553-500029 HST12-4 White (WH) 1 48 250
All�dimensions�in�mm.�Subject�to�technical�changes.
209
TLFX
• 2:1 heat shrinkable tubing
• Halogen free
• Thin walled
• Flexible
• Available in continuous lengths as standard or semi
severed in 25mm and 50mm sleeve (made to order)
• White or yellow
• Supplied flat on reels for trouble free printing
• Good resistance to acids, alkalis, oils, fuels and abrasion
• Operating temperature - -40C to 105 C
• Recommended ribbon – TTDTHOUT/TTRX (Black),
TTRW (White)
Item Pack Qty(M)
TLFX24WH 15
TLFX24YE 15
TLFX32WH 15
TLFX32YE 15
TLFX48WH 15
TLFX48YE 15
TLFX64WH 15
TLFX64YE 15
TLFX95WH 15
TLFX95YE 15
TLFX127WH 12.5
TLFX127YE 12.5
TLFX190WH 12.5
TLFX190YE 12.5
TLFX254WH 10
TLFX254YE 10
TLFX381WH 10
TLFX381YE 10
P r i n t a b l e M a r k i n g S y s t e m s
I d e n t i f i c a t i o n S o l u t i o n s
5.1
210
P r i n t a b l e M a r k i n g S y s t e m s
TCGT
• 3:1 heat shrinkable tubing – one size covers a wide range of diameters
• General use commercial tube
• Self extinguishing
• Good mechanical strength
• Good resistance against organic solvents and chemicals
• Available in continuous lengths
• White or yellow
• Supplied flat on reels for trouble free printing
• Operating temperature - -55 C to +135 C
• CSA approved
• Recommended ribbon – TTDTHOUT/TTRX (Black), TTRW (White)
Item Pack Qty M (Sleeves)
TCGT3-1WH 176M (8 X 22M)
TCGT3-1YE 176M (8 X 22M)
TCGT4.8-1.6WH 110M (5 X 22M)
TCGT4.8-1.6YE 110M (5 X 22M)
TCGT6-2WH 110M (5 X 22M)
TCGT6-2YE 110M (5 X 22M)
TCGT9-3WH 72M (4 X 18M)
TCGT9-3YE 72M (4 X 18M)
TCGT12-4WH 54M (3 X 18M)
TCGT12-4YE 54M (3 X 18M)
TCGT18-6WH 26M (2 X 13M)
TCGT18-6YE 26M (2 X 13M)
TCGT24-8WH 26M (2 X 13M)
TCGT24-8YE 26M (2 X 13M)
TULT
• 3:1 heat shrinkable tubing – one size covers a wide range of diameters
• Self extinguishing
• Good mechanical strength
• Good resistance against organic solvents and chemicals
• Available in continuous lengths
• White or yellow
• Supplied flat on reels for trouble free printing
• Operating temperature - -55 C to +135 C
• CSA approved
• UL224 VW1
• Recommended ribbon – TTDTHOUT/TTRX (Black), TTRW (White)
Item Pack QtyM (Sleeves)
TULT3-1WH 176M (8 X 22M)
TULT3-1YE 176M (8 X 22M)
TULT4.8-1.6WH 110M (5 X 22M)
TULT4.8-1.6YE 110M (5 X 22M)
TULT6-2WH 110M (5 X 22M)
TULT6-2YE 110M (5 X 22M)
TULT9-3WH 72M (4 X 18M)
TULT9-3YE 72M (4 X 18M)
TULT12-4WH 54M (3 X 18M)
TULT12-4YE 54M (3 X 18M)
TULT18-6WH 26M (2 X 13M)
TULT18-6YE 26M (2 X 13M)
TULT24-8WH 26M (2 X 13M)
TULT24-8YE 26M (2 X 13M)
P r i n t a b l e M a r k i n g S y s t e m s
I d e n t i f i c a t i o n S o l u t i o n s
5.1
211
TIPTAG
• Printable polyolefin tags ‘from the roll’
• Especially suitable for identifying large cable bundles,
pipes etc
• Attached with cable ties
• Halogen free
• Low generation of toxic gases
• Low generation of corrosive acid
• Low smoke generation
• Operating temperature - -40oC to +90oC
• London Underground RSE STD 013
• White or Yellow
• Available in 11mm and 15mm height by 65mm and
100mm width
• Recommended ribbon – TTRX (Black)
Item Reel Qty
TIPTAG11X65YE 190
TIPTAG11X65WH 190
TIPTAG11X100YE 120
TIPTAG11X100WH 120
TIPTAG15X65YE 190
TIPTAG15X65WH 190
TIPTAG15X100YE 120
TIPTAG15X100WH 120
P r i n t a b l e M a r k i n g S y s t e m s
I d e n t i f i c a t i o n S o l u t i o n s
5.1
212
P r i n t a b l e M a r k i n g S y s t e m s P r i n t a b l e M a r k i n g S y s t e m s
I d e n t i f i c a t i o n S o l u t i o n s
5.1
213
TIPTAGVA Halogen Free
Identification tags for cablebundle, ladder style , thermaltransfer
• TIPTAG VA
Features and Benefits
TIPTAG VA are halogen free, tear resistant,
and lightweight cross laminated polyolefin
tags ideal for use where weight is a critical
factor. Each surface has a different colour
so enabling the customer to choose between
a white or yellow background giving
both good background text contrast and
reduced stock options.
The perforated structure of the TIPTAGS
ensures that pickability is key. Should a
customer need to pick a printed marker
from a series of tags they simply remove the
one that is needed with the rest remaining
in place.
Should print requirements need to meet
MIL-STD-202G; TIPTAG VA passes with
TTDTHOUT on white side and TT822OUT on
yellow side.
Highly visible and lightweight cable marking.
Material
Colour
Operating
Recommended Ribbon
Thickness of Foil (μm)
Cross Laminated Polyolefin
Yellow / White (YEWH)
-50 °C to +105 °C
TTRX, TTRD
210
Material Data
Article-No. Type Colour Length (L) Width (W) Pack Cont
556-26006 TIPTAGVA10X65 White (WH) 65 12.7 500
556-26008 TIPTAGVA15X65 White (WH) 65 17.4 500
556-26007 TIPTAGVA10X90 White (WH) 90 12.7 500
556-26009 TIPTAGVA15X90 White (WH) 90 17.4 500
Technical Table
Please note! Not all products listed on this page may have this approval. For product specific approvals please
refer to the Appendix.
All�dimensions�in�mm.�Subject�to�technical�changes.
Thermal Transfer Printer
P r i n t a b l e M a r k i n g S y s t e m s
I d e n t i f i c a t i o n S o l u t i o n s
5.1
Article-No. Type Colour Length (L) Width (W) Pack Cont
556-25010 TTAGPU15X100YE Yellow (YE) 100 15 125
556-25006 TTAGPU15X100WH White (WH) 100 15 125
556-25011 TTAGPU15X65YE Yellow (YE) 65 15 190
556-25007 TTAGPU15X65WH White (WH) 65 15 190
556-25020 TTAGPU11X100YE Yellow (YE) 100 11 125
556-25021 TTAGPU11X100WH White (WH) 100 11 125
556-25019 TTAGPU11X65YE Yellow (YE) 65 11 190
556-25012 TTAGPU11X65WH White (WH) 65 11 190
Technical Table
All�dimensions�in�mm.�Subject�to�technical�changes.
• TIPTAG PU for high temperature
The printed mark has a tattoo-like permanency.
Identification�tags
TIPTAG PU
Identification tags for cablebundle, continuous, thermaltransfer
Features and Benefits
The exceptional print permanence of this
material when used with TTRC+ ribbon
gives an excellent print resistant marker able
to survive in areas of harsh abrasion.
Printed text on the surface of the TIPTAG
remains virtually unaffected. Should the top
layer of the material be removed, a visible
mark will still remain within the TIPTAG
material similar to a tattoo effect.
This tattoo-like effect usually occurs after 7
days as the material gradually absorbs the
ink which penetrates from the surface of
the TIPTAG.
Other sizes and colours are available on
request.
214
P r i n t a b l e M a r k i n g S y s t e m s P r i n t a b l e M a r k i n g S y s t e m s
I d e n t i f i c a t i o n S o l u t i o n s
5.1
Self-laminating labels, thermaltransfer
Features and Benefits
The label is ideally suited for labelling cables
and pipes after cables have been connected
or for rework requirements. The protective
laminating foil ensures optimal protection
against humidity, dirt, debris, and mechanical
abrasion. The labels are supplied in a
protective box that ensures labels are kept
as good as new. Other colours are available
on request.
For problem-free printing, we recommend
Tagprint PRO software, and TT4000+ and
TT420+ printers.
596-12091 TAG51TD3-1209-WHCL White 1.35 3.0 25.40 8.80 19.05 85.0 3 5000
596-12094 TAG24TD1-1209-WHCL White 3.5 7.6 50.80 12.70 36.50 55.0 1 1000
596-11209 TAG6TD1-1209-WHCL White 10.0 22.2 50.80 25.40 95.25 55.0 1 500
Technical Table
Self-laminating labels offer an excellent protection against abrasionand environmental impact.
Article-No. Type Colour Ø min. Ø min. (W) (H) (H2) Liner (WL) Row Pack Bundle Bundle Width Height Height Width of Labels per
Material
Ribbons
Curing
Adhesive
Thickness of Foil (μm)
chem. material properties
Type 1209, Vinyl (PVC), white-transparent (WH/CL)
-20 °C to +80 °C
TTRA, TTRD
from 0 °C
Acrylic
90
Resistant to water, alcohol, most oils, greases, fuel,
aliphatic solvents, weak acids, salts and alkalis.
Material Data
All dimensions in mm. Subject to technical changes.
Thermal Transfer Printer
215
P r i n t a b l e M a r k i n g S y s t e m s
I d e n t i f i c a t i o n S o l u t i o n s
5.1
Labels for control panel identification, thermal transfer yellow
Features and Benefits
These labels can be used for both permanent
and temporary labelling. They have
good adhesion characteristics for most surface
types, and they are ideal for use in
areas such as repair and extension of control
cabinets and control units. Material
1212 can be removed without leaving a
sticky residue. For problem-free printing, we
recommend Tagprint Pro software, TT4000+
and TT420 printers with TT822OUT ribbons. Switchgear application.
Material
Curing
Recommended
Adhesive
Thickness of Foil (μm)
chem. material properties
Type 1211, Vinyl (PVC), yellow gloss
Type 1212, Vinyl (PVC), yellow matt
-20 °C to +80 °C
from +5 °C
TTRD
Acrylic
83 (1211)/86 (1212)
Resistant to water, alcohol, most oils, greases, fuel, aliphatic solvents,
weak acids, salts and alkalis.
Material Data
Article-No. Type Colour (W) (H ) Liner (WL) Row Pack Cont.
596-21211 TAG15-09TE-1211- Yellow 15.00 9.00 89.0 5 10000
596-01211 TAG16-06TE-1211- Yellow 16.50 6.00 101.60 5 20000
596-31211 TAG19-11TE-1211- Yellow 19.00 11.00 89.0 4 10000
596-11211 TAG20-08TE-1211- Yellow 20.00 8.00 101.60 4 10000
596-41211 TAG38-11TE-1211- Yellow 38.00 11.00 85.09 2 5000
596-51211 TAG56-22TE-1211- Yellow 56.00 22.00 62.0 1 2000
Technical Table
Thermal�Transfer�-�Plain�Labels,�Material�1211
Width Height Width of Labels per
Article-No. Type Colour (W) (H) Liner (WL) Row Pack Cont.
596-12122 TAG15-09TE-1212- Yellow 15.00 9.00 89.0 5 10000
596-12120 TAG16-06TE-1212- Yellow 16.50 6.00 101.60 5 20000
596-12123 TAG19-11TE-1212- Yellow 19.00 11.00 89.0 4 10000
596-12121 TAG20-08TE-1212- Yellow 20.00 8.00 101.60 4 10000
596-12124 TAG38-11TE-1212- Yellow 38.00 11.00 85.09 2 5000
596-12125 TAG56-22TE-1212- Yellow 56.00 22.00 62.0 1 2000
Technical Table
Thermal�Transfer�-�Plain�Labels,�Material�1212
Width Height Width of Labels per
All�dimensions�in�mm.�Subject�to�technical�changes.
All�dimensions�in�mm.�Subject�to�technical�changes.
Thermal Transfer Printer
216
P r i n t a b l e M a r k i n g S y s t e m s P r i n t a b l e M a r k i n g S y s t e m s
I d e n t i f i c a t i o n S o l u t i o n s
5.1
Article-No. Type Colour (W) (H ) Liner (WL) Row Pack Cont.
596-12147 TAG05-08TC-1216-WH White (WH) 5.00 8.00 85.00 16 25000
596-12151 TAG05-15TC-1216-WH White (WH) 5.00 15.00 85.00 16 25000
596-12149 TAG06-10TC-1216-WH White (WH) 6.00 10.00 85.00 13 25000
596-12148 TAG08-08TC-1216-WH White (WH) 8.00 8.00 85.00 10 25000
596-12150 TAG08-10TC-1216-WH White (WH) 8.00 10.00 85.00 10 25000
596-12152 TAG08-15TC-1216-WH White (WH) 8.00 15.00 85.00 10 25000
Technical TableWidth Height Width of Labels per
Labels for control panel identification, thermal transferwhite
Features and Benefits
These white labels give excellent contrast
and are suitable for clear and permanent
identification of control panels. Available
sizes are designed to cover the needs of
most manufacturers.
For problem-free printing, we recommend
Tagprint Pro software, TT4000+ and TT420
printers with TT822OUT ribbons.
Switchgear application.
Material
Operating
Curing
Adhesive
Thickness of Foil (μm)
chem. material properties
Type 1210, Polyart, Vinal (WH)
-30 °C to +60 °C
0 °C
TTRD
Acrylic
105
Resistant to water, alcohol, most oils, greases, fuel, aliphatic solvents,
weak acids, salts and alkalis
Material Data
All�dimensions�in�mm.�Subject�to�technical�changes.
Thermal Transfer Printer
217
218
P r i n t a b l e M a r k i n g S y s t e m s
I d e n t i f i c a t i o n
5.1
Type labels, thermal transfer (silver)
Features and Benefits
A matt silver polyester label ideally suited
for use as an asset rating plate for electronic
equipment such as computers, televisions,
and music systems.
The temperature range is suitable for use on
all electronic home and office components.
The silver colour also ensures that barcode
scanners easily read printed barcodes.
For problem-free printing, we recommend
Tagprint PRO software, TT4000+ and TT420
printers with TT822OUT ribbons.
Material
Curing
Recommended
Adhesive
Thickness of Foil (μm)
chem. material properties
Type 1204, Polyester (PET) Silver (SE)
-40 °C to +150 °C, intermittent +200 °C
from 0 °C
TTRD
Acrylic
55
Excellent resistance to water, alcohol,
most oils, greases, fuel, aliphatic
solvents,
weak acids, salts and alkalis
Material Data
All�dimensions�in�mm.�Subject�to�technical�changes.
Thermal Transfer Printer
Article-No. Type Colour (W) (H) Liner (WL) Row Pack Cont.
596-27120 TAG27TD2-1204 Silver (SR) 38.10 19.05 85.09 2 5000
596-73124 TAG73TD1-1204 Silver (SR) 50.80 25.40 55.00 1 2000
Technical TableWidth Height Width of Labels per
P r i n t a b l e M a r k i n g S y s t e m s
I d e n t i f i c a t i o n S o l u t i o n s
5.1P r i n t a b l e M a r k i n g S y s t e m s
219
Warehouse labelling, thermaltransfer (yellow)
Features and Benefits
For high contrast identification labelling in
warehouse areas, this continuous length
label material gives the user the ability to
print large sized text and barcodes and cut
to length after printing with either a supplied
in-line cutter with the TT4000+ or by
hand with the TT420+. Using these products
across the company ensures that all marking
is to a consistent and professional standard.
For problem-free printing, we recommend
Tagprint PRO software, TT4000+ and TT420+
printers with TT822OUT ribbons.
Warehouse labelling large enough to easily identify stores material.
Material
Curing
Recommended
Adhesive
Thickness of Foil (μm)
Type 1213, Vinyl (PVC), glossy colours
-40 °C to +90 °C
from +8 °C
TTRD/TTRW
Acrylic
66
Material Data
Article-No. Type Colour (W) Liner (WL) Row Pack Cont.
596-03103 TAGR4TD1-1213-YE Yellow 25.0 25.0 1 50,0
596-12167 TAG108TD1-1213-YE Yellow 40.0 40.0 1 50,0
596-12169 TAGR1TD-1213-YE Yellow 101.6 101.6 1 30,5
Technical TableWidth Width of Labels per
All�dimensions�in�mm.�Subject�to�technical�changes.
P r i n t a b l e M a r k i n g S y s t e m s
I d e n t i f i c a t i o n S o l u t i o n s
5.1
Pipe MarkingThermal Transfer Labels (yellow/green & white)
Features and Benefits
Continuous length label material in a range
of high visibility colours gives the user the
ability to print large sized text and barcodes
for use in industrial pipe marking areas. The
label can be cut to length after printing
with a supplied in-line cutter with the
TT4000+ or by hand with the TT420+. Using
these products across the company ensures
that all marking is to a consistent and professional
standard.
For problem-free printing, we recommend
Tagprint PRO software, TT4000+ and TT420
printers. Use ribbon TTRD for yellow
and white material, and ribbon TTRW for
green and red material.
Large and highly visible pipe marking.
Material
Curing
Recommended
Adhesive
Thickness of Foil (μm)
Type 1213, Vinyl (PVC), glossy colours
-40 °C to +90 °C
from +8 °C
TTRD/TTRW
Acrylic
66
Material Data
Article-No. Type Colour Width (W)(M)
596-03103 TAGR4TD1-1213-YE Yellow 25.0 50
596-12167 TAG108TD1-1213-YE Yellow 40.0 50
596-12169 TAGR1TD-1213-YE Yellow 101.6 30.5
Technical Table
Reel Length
All�dimensions�in�mm.�Subject�to�technical�changes.
220
P r i n t a b l e M a r k i n g S y s t e m s
I d e n t i f i c a t i o n S o l u t i o n s
5.1P r i n t a b l e M a r k i n g S y s t e m s
Type 1213, Vinyl (PVC), glossy colours
-40 °C to +90 °C
from +8 °C
TTRD/TTRW
Acrylic
66
Ribbons
• Specially formulated to match TIPS printable products
• Durable, permanent marks
• Cost effective widths available
• Available in black and white ink
• Value 300m rolls
A comprehensive range of self-adhesive plain, self-laminating
and tamper proof labels are available, all of which can be
printed on using the TT4000+ or TT420+ printer.
Please ask for our full catalogue for further details.
Item Reel Qty Colour
TTRD 100MM 300m Black
TTRW 30MM 300m White
TTRW60MM 300m White
TTRW 100MM 300m White
TTDTHOUT/TTRX 40MM 300m Black
TTDTHOUT/TTRX 60MM 300m Black
TTDTHOUT/TTRX 100MM 300m Black
221
Helagrip Chevron CutHelagrip is the ideal wire and cable identification solution.
Our indelible printing technology and high grade PVC material
ensures that Helagrip is the best expandable marker system
available. Our special chevron cut ensures that the markers
lock together and this, in conjunction with our specially
designed profile, enables a wide range of cable sizes to be
identified with a single marker. The standard PVC material is
ideal for everyday use.
Applications
General Panel Building, Mass Transit,
Telecommunications, Utilities.
0 9. A Z �+ /0 1 2 3 4 5 6 7 8 9
Reel Qty. 1000 1000 250
Mark Colour 1-3mm 2-5mm 4-9mm
0 Black or Black/White HGDC1-3/0 HGDC2-5/0 HGDC4-9/0
1 Brown or Black/White HGDC1-3/1 HGDC2-5/1 HGDC4-9/1
2 Red or Black/White HGDC1-3/2 HGDC2-5/2 HGDC4-9/2
3 Orange or Black/White HGDC1-3/3 HGDC2-5/3 HGDC4-9/3
4 Yellow or Black/White HGDC1-3/4 HGDC2-5/4 HGDC4-9/4
5 Green or Black/White HGDC1-3/5 HGDC2-5/5 HGDC4-9/5
6 Blue or Black/White HGDC1-3/6 HGDC2-5/6 HGDC4-9/6
7 Violet or Black/White HGDC1-3/7 HGDC2-5/7 HGDC4-9/7
8 Grey or Black/White HGDC1-3/8 HGDC2-5/8 HGDC4-9/8
9 White or Black/White HGDC1-3/9 HGDC2-5/9 HGDC4-9/9
A *Black/White or Black/Yellow HGDC1-3/A HGDC2-5/A HGDC4-9/A
B *Black/White or Black/Yellow HGDC1-3/B HGDC2-5/B HGDC4-9/B
C *Black/White or Black/Yellow HGDC1-3/C HGDC2-5/C HGDC4-9/C
D *Black/White or Black/Yellow HGDC1-3/D HGDC2-5/D HGDC4-9/D
E *Black/White or Black/Yellow HGDC1-3/E HGDC2-5/E HGDC4-9/E
F *Black/White or Black/Yellow HGDC1-3/F HGDC2-5/F HGDC4-9/F
G *Black/White or Black/Yellow HGDC1-3/G HGDC2-5/G HGDC4-9/G
H *Black/White or Black/Yellow HGDC1-3/H HGDC2-5/H HGDC4-9/H
I *Black/White or Black/Yellow HGDC1-3/I HGDC2-5/I HGDC4-9/I
J *Black/White or Black/Yellow HGDC1-3/J HGDC2-5/J HGDC4-9/J
K *Black/White or Black/Yellow HGDC1-3/K HGDC2-5/K HGDC4-9/K
L *Black/White or Black/Yellow HGDC1-3/L HGDC2-5/L HGDC4-9/L
M *Black/White or Black/Yellow HGDC1-3/M HGDC2-5/M HGDC4-9/M
N *Black/White or Black/Yellow HGDC1-3/N HGDC2-5/N HGDC4-9/N
O *Black/White or Black/Yellow HGDC1-3/O HGDC2-5/O HGDC4-9/O
P *Black/White or Black/Yellow HGDC1-3/P HGDC2-5/P HGDC4-9/P
Q *Black/White or Black/Yellow HGDC1-3/Q HGDC2-5/Q HGDC4-9/Q
R *Black/White or Black/Yellow HGDC1-3/R HGDC2-5/R HGDC4-9/R
S *Black/White or Black/Yellow HGDC1-3/S HGDC2-5/S HGDC4-9/S
T *Black/White or Black/Yellow HGDC1-3/T HGDC2-5/T HGDC4-9/T
U *Black/White or Black/Yellow HGDC1-3/U HGDC2-5/U HGDC4-9/U
V *Black/White or Black/Yellow HGDC1-3/V HGDC2-5/V HGDC4-9/V
W *Black/White or Black/Yellow HGDC1-3/W HGDC2-5/W HGDC4-9/W
X *Black/White or Black/Yellow HGDC1-3/X HGDC2-5/X HGDC4-9/X
Y *Black/White or Black/Yellow HGDC1-3/Y HGDC2-5/Y HGDC4-9/Y
Z *Black/White or Black/Yellow HGDC1-3/Z HGDC2-5/Z HGDC4-9/Z
+ *Black/White or Black/Yellow HGDC1-3/+ HGDC2-5/+ HGDC4-9/+
- *Black/White or Black/Yellow HGDC1-3/- HGDC2-5/- HGDC4-9/-
/ *Black/White or Black/Yellow HGDC1-3// HGDC2-5// HGDC4-9//
*Black/White or Black/Yellow HGDC1-3/Q HGDC2-5/Q HGDC4-9/Q
Helagrip Reels
* Please specify which colour when ordering Black/White or Black/Yellow
P r e - Te r m i n a t i o n C a b l e M a r k i n g
I d e n t i f i c a t i o n S o l u t i o n s
5.2
222
P r e - Te r m i n a t i o n C a b l e M a r k i n g P r e - Te r m i n a t i o n C a b l e M a r k i n g
I d e n t i f i c a t i o n S o l u t i o n s
5.2
Helagrip Chevron Cut - Helagrip Kits
Helagrip Thimble Jig - Applicator ToolThe PTFE coated applicator tools are designed for use with
Helagrip. The coating ensures that the markers can be slipped
onto the wire with minimum effort.
Reference Cable Range Marker Marker
in mm Length Quantity
HGPC1-3-Kit 1.0 – 3.0 3.5 18 x 250
HGPC2-5-Kit 2.0 – 5.0 3.5 18 x 250
Kit Contents. Chevron Cut.
Helagrip Kit
L N R S +T �0 1 2 3 4 5 6 7 8 9
Reference Cable Range Marker Marker Included
in mm Length Quantity Applicator Tool
HGCC1-3 1.0 – 3.0 3.5 24 x 25 TJC1-3
HGCC2-5 2.0 – 5.0 3.5 20 x 25 TJC2-5
Kit Contents. Chevron Cut.
Helagrip Cassette
A E L N +R S T �0 1 2 3 4 5 6 7 8 9
Reference Marker Type Pack Qty
TJC 1-3 HG 1-3 1
TJC 2-5 HG 2-5 1
TJC 4-9 HG 4-9 1
Thimble Jig
223
224
5.2I d e n t i f i c a t i o n S o l u t i o n s
P r e - Te r m i n a t i o n C a b l e M a r k i n g
Material
Colours
Temperature
Material Specification
PVC
international resistor colour code 0-9
-65°C to +105°C, intermittent 135°C
UL224, BS-3858-Type 3, IEC 304
Unicut Markers P
For areas where space and weight saving is required.
d internal diameter
L length of single mark
W wall thickness
P Thin Wall PVC MarkersFeatures
These high grade PVC markers have a thin wall which makes
them ideal for identifying wire in areas where space is at a
premium.
The thin wall also ensures that the product is flexible, thus making
installation easier. Since the PU range has a thin wall, the product
is also lighter than other wire markers. In order to facilitate the
application of a single mark or series of markers, a range of TJC
applicator tools is available.
Applications
For close density wiring applications where the thin wall section
takes up the minimum amount of space.
0 1 2 3 4 5 6 7 8 9
Semi Severed d Wall Thickness Length Pack Qty RecommendedReference mm mm mm Tool
P10 1.00 0.35 3.0 500 TJC00
P12 1.20 0.35 3.0 500 TJC00
P15 1.50 0.35 3.0 500 TJC 1-3
P20 2.00 0.35 5.0 500 TJC 2-5
P25 2.50 0.35 5.0 500 TJC 2-5
P30 3.00 0.35 5.0 500 -
P40 4.00 0.35 5.0 500 TJC 4-9
P55 5.50 0.35 5.0 1000 -
P Thin Wall PVC Markers
Reference Marker Pack Qty
TJC1-3 For P15 1
TJC2-5 For P20 1
TJC2-5 For P25 1
TJC4-9 For P40 1
Applicator Tool
P r e - Te r m i n a t i o n C a b l e M a r k i n g
Reel of 1000Mark Colour 2.5 - 6mm
0 Black/Yellow HODS85/0
1 Black/Yellow HODS85/1
2 Black/Yellow HODS85/2
3 Black/Yellow HODS85/3
4 Black/Yellow HODS85/4
5 Black/Yellow HODS85/5
6 Black/Yellow HODS85/6
7 Black/Yellow HODS85/7
8 Black/Yellow HODS85/8
9 Black/Yellow HODS85/9
A Black/Yellow HODS85/A
B Black/Yellow HODS85/B
C Black/Yellow HODS85/C
D Black/Yellow HODS85/D
E Black/Yellow HODS85/E
F Black/Yellow HODS85/F
G Black/Yellow HODS85/G
H Black/Yellow HODS85/H
I Black/Yellow HODS85/I
J Black/Yellow HODS85/J
K Black/Yellow HODS85/K
L Black/Yellow HODS85/L
M Black/Yellow HODS85/M
N Black/Yellow HODS85/N
O Black/Yellow HODS85/O
P Black/Yellow HODS85/P
Q Black/Yellow HODS85/Q
R Black/Yellow HODS85/R
S Black/Yellow HODS85/S
T Black/Yellow HODS85/T
U Black/Yellow HODS85/U
V Black/Yellow HODS85/V
W Black/Yellow HODS85/W
X Black/Yellow HODS85/X
Y Black/Yellow HODS85/Y
Z Black/Yellow HODS85/Z
Black/Yellow Markers
225
5.2I d e n t i f i c a t i o n S o l u t i o n s
P r e / P o s t Te r m i n a t i o n C a b l e M a r k i n g
Material
Colours
Temperature
Material Specification
PVC
white, yellow, international resistor colour code,
0 – 9, A – Z, +, –, /,
-65°C to +105°C, intermittent +135°C
UL224, BS-2782-540B, IEC 304
Ovalgrip Markers Straight Cut HOBS
A Z0 9 A Z0 9
A simple idea for complex marking solutions.
Ovalgrip MarkersFeatures
Ovalgrip can either be used directly onto the wire as a pre
wire-termination marker, or used in conjunction with Arrow Tags and
cable ties as a post termination marking system. Ovalgrip is available
semi-severed, straight cut on reels as standard.
Pack Qty. 100Mark Colour 2.5 - 6mm
0 Black/White HOBS85/0
1 Black/White HOBS85/1
2 Black/White HOBS85/2
3 Black/White HOBS85/3
4 Black/White HOBS85/4
5 Black/White HOBS85/5
6 Black/White HOBS85/6
7 Black/White HOBS85/7
8 Black/White HOBS85/8
9 Black/White HOBS85/9
A Black/White HOBS85/A
B Black/White HOBS85/B
C Black/White HOBS85/C
D Black/White HOBS85/D
E Black/White HOBS85/E
F Black/White HOBS85/F
G Black/White HOBS85/G
H Black/White HOBS85/H
I Black/White HOBS85/I
J Black/White HOBS85/J
K Black/White HOBS85/K
L Black/White HOBS85/L
M Black/White HOBS85/M
N Black/White HOBS85/N
O Black/White HOBS85/O
P Black/White HOBS85/P
Q Black/White HOBS85/Q
R Black/White HOBS85/R
S Black/White HOBS85/S
T Black/White HOBS85/T
U Black/White HOBS85/U
V Black/White HOBS85/V
W Black/White HOBS85/W
X Black/White HOBS85/X
Y Black/White HOBS85/Y
Z Black/White HOBS85/Z
Black/White Markers
�+ �+ //
Material
Colours
Temperature
Flammability
Material Specification
Polyolefin
Yellow 0-9, A-Z, +, -, /,
-40°C to +90°C, intermittent +120°C
Zero Halogen, low smoke and Toxicity
RSE/STD/013
LFHO
5.2I d e n t i f i c a t i o n S o l u t i o n s
P r e / P o s t Te r m i n a t i o n C a b l e M a r k i n g
226
Kit contents
All dimensions are in mm and are subject to technical
modification.
A handy rack is also available. See Sales Support section.
0 1 2 3 4 5 6 7 8 9
0 1 2 3 4 5 6 7 8 9 R S TL N �+
1000Mark Colour 2.5 - 6mm
0 Black HODS85/0
1 Brown HODS85/1
2 Red HODS85/2
3 Orange HODS85/3
4 Yellow HODS85/4
5 Green HODS85/5
6 Blue HODS85/6
7 Violet HODS85/7
8 Grey HODS85/8
9 White HODS85/9
Colour Coded Markers
Reference Dimensions Marker Qty Recommended No of Marks
Length Per Reel Carrier Per Carrier
HOPS85 KIT 2.5 - 6.0 4.5 18 x 125 AT2/AT3 8/14
Ovalgrip Markers Kit - Straight Cut
Arrow Tags AT
Features
The range of Arrow Tags is suitable for use after wire termination
has taken place, and can be mounted with Ovalgrip Cable
Markers or written on by hand using an indelible ink.
The Arrow Tags are fixed onto the wire or cable bundle with
cable ties (maximum cable tie width is 7.5mm).
Material
Colours
Temperature
Flammability
PA66
Natural (NL) and Black (BK)
-40°C to +85°C, intermittent 105°C
UL94 V2
Identification Arrow Tags AT
L length B width
Arrow Tag AT3 Arrow Tag AT2
A simple and quick marking method.
Reference L B Maximum Cable Maximum Colour Pack
Tie Width Markers NL BK Quantity
AT2 63.0 9.0 6.0 8 • • 100
AT3 100.0 9.0 6.0 14 • • 100
Identification Arrow Tags AT
Reference Length Width Suitable C/Ties Pack Qty
IT1 44 19 N/A 2 x T50 Series 100
Identification Arrow Tags AT
P r e / P o s t Te r m i n a t i o n C a b l e M a r k i n g
227
5.3I d e n t i f i c a t i o n S o l u t i o n s
P o s t Te r m i n a t i o n C a b l e M a r k i n g
Material
Colours
Temperature
Flammability
Material Specification
PA66
Yellow material and Colour Code
White material on special request
-40°C to +85°C, intermittent +105°C
Meets UL94 V0
Colours meet IEC304 and EN60062
WIC Materials Information
WIC Clip-On MarkersThe new easy to use WIC clip-on cable marker is ideal for both
pre and post termination marking. WIC’s (Wire Identification Clip)
uniquely strong gripping profile ensures that the marker stays in
place even under the most arduous of conditions.
• Easy to apply with or without the WICTOOL
• Only 3 sizes need to cover cables from 0.5mm - 6.0mm2
• Each WIC marker interlocks with the next to form perfectly
aligned multi-mark codes
• Unique WICTOOL makes application easy especially
in confined spaces.
• Markers are supplied loaded into a handy pocket sized dispenser.
• Manufactured from high grade PA66 for excellent mechanical
strength and chemical resistance.
• Individual letters / numbers in yellow to special order only
Number and letter combinations available in kit form See page 55.
0 1 2 3 4 5 6 7 8 9
WIC Markers
Reference Pack Qty
W1 220 1
WIC Tool
Product Cable Diameter Cable size Reference Range mm Range mm2
WIC1 2.0 - 2.8 0.5 - 1.5
WIC2 2.8 - 3.8 1.5 - 2.5
WIC3 4.3 - 5.3 4.0 - 6.0
W1 W2 W3
Box Qty. 1000 1000 500
Mark Colour 0.5 - 1.5mm 1.5 - 2.5mm 4-6mm
0 Black W1/0 W2/0 W3/0
1 Brown W1/1 W2/1 W3/1
2 Red W1/2 W2/2 W3/2
3 Orange W1/3 W2/3 W3/3
4 Yellow W1/4 W2/4 W3/4
5 Green W1/5 W2/5 W3/5
6 Blue W1/6 W2/6 W3/6
7 Violet W1/7 W2/7 W3/7
8 Grey W1/8 W2/8 W3/8
9 White W1/9 W2/9 W3/9
WIC Clip-On Marker Kits
• Kits available from stock
Reference Contents Pack Qty
Colour Coded
W1-270 1 box of 5 dispensers each containing 10 strips of 20 marks 0-9 colour Coded 0.5mm-1.5mm 1000Red Dispenser
W2-270 1 box of 5 dispensers each containing 10 strips of 20 marks 0.9 colour Coded 1.5mm-2.5mm 1000Blue Dispenser
W3-270 1 box of 5 dispensers each containing 10 strips of 10 marks 0.9 colour Coded 4mm-6mm 500Yellow Dispenser
Letters Black on Yellow
W1-272 W1 AELNRST + - Q packed as above Black on Yellow 1000
W1-273 W1 BCUVWPDFIM Black on Yellow 1000
W1-274 W1 GHYZOQJKXL Black on Yellow 1000
W2-272 W2 AELNRST + - Q packed as above Black on Yellow 1000
W2-273 W2 BCUVWPDFIM Black on Yellow 1000
W2-274 W2 GHYZOQJKXL Black on Yellow 1000
W3-272 W3 AELNRST + - Q packed as above Black on Yellow 500
W3-273 W3 BCUVWPDFIM Black on Yellow 500
W3-274 W3 GHYZOQJKXL Black on Yellow 500
WIC Clip-On Marker Kits
Material
Colours
Temperature
Flammability
Material Specification
PA66
Yellow material and Colour Code
White material on special request
-40°C to +85°C, intermittent +105°C
Meets UL94 V0
Colours meet IEC304 and EN60062
WIC Materials Information
P o s t Te r m i n a t i o n C a b l e M a r k i n g
I d e n t i f i c a t i o n S o l u t i o n s
5.3
228
P o s t Te r m i n a t i o n C a b l e M a r k i n g
A Label width
B Height of
markable area
C Label height
Colour
Red (RD)
Orange (OE)
Yellow (YW)
Green (GN)
Blue (BE)
White (WE)
Colour Options
With the aid of the marking pen supplied in the starter pack, rapididentification marking on site is possible.
Marker pen
Material
Colour
Operating Temp.
Adhesive Base
Properties
Type 100, self laminating labels
Inscription field red (RD), orange (OE), yellow
(YW), green (GN), blue (BE),
white (WE)
-40°C to +80 °C
Acrylic
Non-shrinking, aging resistant
RiteOn® Identification Marking Labels
RiteOn®
Self-laminating labels
Ordering Example:
Colour
Part number
R0201-BE
RiteOn® Label Dispenser Self Laminating Labels
This practical label dispenser provides a simple, handy method for
identifying cables and wires. It is ideally suited for pre-assembly
marking or for repairs in the field. RiteOn® self adhesive labels
consist of a printable area on which the mark is written and a
self-laminating portion which protects the mark.
Characteristics
The RiteOn® label dispenser is ideal for the production of simple
cable markers, on site repair operations, temporary marking or
prototyping. The refillable dispenser is designed to aid the user
to produce hand written inscriptions neatly and quickly anywhere.
Application
Using a marker pen (supplied in the starter pack), the desired
inscription is written onto the white portion of the label displayed in the
window. The label is ejected from the front of the dispenser by pulling
the backing tape.
Typical Applications
RiteOn® labels are used in Telecommunication, Automotive
applications, for marking PC cables, sports equipment and laboratory
apparatus.
Starter Kit includes - 1 x RO202, 1 x CB/CTL/BLACK
Reference Description A B C Labels Per Roll Pack Qty
SPRO200-WH Starter pack 19.1 12.7 50.8 150 1
RO201 Dispenser & Markers 12.7 12.7 38.1 200 1
RO201REF Refill pack 12.7 12.7 38.1 200 1
RO202 Dispenser & Markers 19.1 12.7 50.8 150 1
RO202REF Refill pack 19.1 12.7 50.8 150 1
RO203 Dispenser & Markers 19.1 25.4 76.2 100 1
RO203REF Refill pack 19.1 25.4 76.2 100 1
Standard colour White (WE), others available on request.
Self Laminating Labels
Reference Description Pens Per Pack
CB/CTL/BLACK RiteOn® permanent marker pen 1
Marker Pens
Marker Dispenser5mm wide adhesive vinyl cloth markers printed black on white,
supplied in roll form of 2.4m per roll.
• Refills available 0-9, A-Z
Reference Description Pack Qty
MT1 Dispenser 10 Rolls 0-9 1
MTRK Refill Kit 0-9 1
Marker Dispenser
A d h e s i v e L a b e l s
I d e n t i f i c a t i o n S o l u t i o n s
229
5.4
230
5.5I d e n t i f i c a t i o n S o l u t i o n s
I d e n t i f i c a t i o n C a b l e s T i e s
Identification Cable Ties
• HellermannTyton I.D. Ties will both bundle and identify
in one operation
• Larger sizes of ties and tags can be pre-printed,
telephone our Sales Hotline for further information
• Marking by indelible marker pen or hot foil printing
• Material - PA66
• Colour - natural
Reference Length Width Flag Area Bundle Diameter Pack Qtymm mm mm mm
IT18R 100 2.5 25 x 8 16 100
Identification Cable Ties
ITI8FL 110 2.5 20.5 x 9 16 100
IT50R 210 4.7 28 x 12.8 44 100
IT50L 382 4.7 58 x 12.5 109 100
IT50RD 204 4.7 29 x 25 50 50
IT50RT 204 4.7 29 x 25 50 50
HellermannTyton can offer customised printing on any of the above ties, please call our customer service department
for further details. For our range of standard printed cable ties please see page 231 section 5.5.
Please see page 229 for details of the marker pen to be used with the above Identification Ties.
I d e n t i f i c a t i o n C a b l e s T i e s
231
5.5I d e n t i f i c a t i o n S o l u t i o n s
I d e n t i f i c a t i o n C a b l e T i e s
Printed Ties for General ID Purposes
• Easily identify cables, pipes, tools and equipment
• Custom printed to your requirements
• Manufactured from Virgin Grade PA66 material
• Available in various colours
• Other sizes available on request
• MOQ of 5000 applicable
Reference Description Length Width Printable Area Pack Qty
T50RPRN Printed Tie 200mm 4.6mm 100mm 1000
LK2APRN Printed Tie 275mm 4.6mm 200mm 1000
Printed Identification Ties
I d e n t i f i c a t i o n C a b l e T i e s
I d e n t i f i c a t i o n S o l u t i o n s
5.5
232
Printed Ties to Identify Vibration Risk
• For use on power tools & other equipment
• Identifies 3 Risk Levels, Low, Medium & High
• Custom printed to your specific requirements
• Available in Red, Blue, Green, Yellow & Orange
• MOQ applicable
Printed Fluorescent Ties
• Easily identify tools and equipment
• Custom printed to your requirements
• Manufactured from Virgin Grade PA66 material
• Available in fluorescent Orange or Yellow
• MOQ applicable
Reference Description Length Width Printable Area Pack Qty Carton Qty
T120RPRN Printed Tie 380mm 7.6mm 180mm 100 1000
Printed Ties to Identify Vibration Risk
Reference Description Length Width Printable Area Pack Qty Carton Qty
T120IPRN Printed Tie 300mm 7.6mm 180mm 100 1000
Printed Fluorescent Ties
I d e n t i f i c a t i o n C a b l e T i e s
233
S e c u r i t y S e a l s
I d e n t i f i c a t i o n S o l u t i o n s
5.6
234
Pull Tight Security Seal
• Suitable for fire doors & fire extinguishers
• Safe deposit boxes
• Coin boxes
• Moulded in high grade polypropylene
• Supplied in mats of 10
• Available with a sequential serial number if required
• Customised printing available at extra cost. MOQ will apply
Pull Tight Security Seal
• 220mm long
• Suitable for transportation
• Postal bags
• Roll cages
• Moulded in high grade polypropylene
• Customised printing available at extra cost. MOQ will apply
Reference Description Length Width Flag length Flag Width Printable Area Pack Qtymm mm mm mm mm
PTSK2 Pull Tight Seal 220mm 220 8 85 27 50 1000
Pull Tight Security Seal
Reference Description Length Width Flag length Flag Width Printable Area Pack Qtymm mm mm mm mm
PTSK Pull Tight Seal 195 2.4 40 19.5 32 2000
Pull Tight Security Seal
S e c u r i t y S e a l s S e c u r i t y S e a l s
I d e n t i f i c a t i o n S o l u t i o n s
5.6
235
Pull Tight Security Seals
• 350mm long
• Suitable for postal bags
• Security containers
• Transportation
• Moulded in high grade polypropylene
• Customised printing available at extra cost. MOQ will apply
Fixed Length Security Seal
• 200mm long
• Suitable for vehicle doors
• Roll cages
• Tankers
• Made in high grade polypropylene
• Customised printing available at extra cost. MOQ will apply
Pluglok Security Closure
• For use with attached lid distribution containers
• Easy application and removal giving considerable time savings
• Manufactured in high grade polypropylene
• Available in 4 sizes to suit most popular box types
Reference Description Length Width Flag length Flag Width Printable Area Pack Qtymm mm mm mm mm
FLSK Fixed Length Seal 200 5.9 55 19.5 50 1000
Fixed Length Security Seal
Reference Description Pack Qty
PLS10 Pluglok Security Closure 1000
Pluglok Security Closure
Reference Description Length Width Flag length Flag Width Printable Area Pack Qtymm mm mm mm mm
PTSK3 Pull Tight Seal 350mm 350 8 85 27 50 1000
Pull Tight Security Seal