Upload
marco-paglietta
View
220
Download
3
Tags:
Embed Size (px)
DESCRIPTION
General catalogue, 2014, ENG
Citation preview
Index
INTRODUCTION ..................................................
PRODUCTS
AWL 810/AB .........................................................
AWL 810/AB TWIN ...............................................
AWL 864/BC .........................................................
AWL 864/BC TWIN ...............................................
AWL 865.866/A ...................................................
AWL 864+865.866/BC+A ....................................
AWL 856.857/AB ...............................................
HELIX ....................................................................
SUGGESTED CONFIGURATIONS ....................
ACCESSORIES ..................................................
Aircraft Warning Lights
INDEX
ICARO
2
4
5
6
7
8
9
10
11
12
16
Aircraft Warning LightsICARO
INTRODUCTION
Sirena designs, engineers and manufactures signaling devices since 1974. From Industrial Signaling Devices to Evacuation Systems, through Aircraft
Warning Lights and Automation Devices, our expertise allows to deliver Customers with the highest quality signaling devices available on today’s market.
With 40 years of intense know-how and a presence in over 60 countries worldwide, Sirena is the best choice when it comes to satisfying your signaling needs.
ICARO is Sirena’s Aircraft Warning Lights range. Engineered entirely on LED base, ICARO’s Low, Medium and High intensity devices are one of the best products available today. High performances, easy installation and virtually zero maintenance, allow Customers and Installers to add considerable value to their projects. All devices are ICAO and FAA certified as well as CE marked.
Our expert Team will guide you to the right choice and will help you to determine the best and most cost efficient solution for your projects.
With a complete range of devices (Low Intensity Type A and B, Medium Intensity Type A, B and C and High Intensity Type A and B), ICARO is the complete solution you are looking for.
Sirena is ISO 9001, 14001 and 18001 certified.
2
33
HIGH INTENSITY High Intensity Aircraft
Warning Lights compliant to ICAO Type A, B and FAA L-856, L-857 regulations.
100% LED based, these devices offer a white light with a maximum intensity of 200.000 Cd satisfying the most demanding applications.
Typically installed on structures over 150 meters, high intensity devices are used for day and twilight marking.
MEDIUM INTENSITY Medium Intensity Aircraft
Warning Lights compliant to ICAO Type A, B, C and FAA L-864, L-865, L-866 regulations.
100% LED based, these devices offer a white/red light with a maximum intensity of 20.000 Cd satisfying the most demanding applications.
Typically installed on structures over 45 meters, medium intensity devices are used for day, twilight and night marking.
LOW INTENSITY Low Intensity Aircraft Warning
Lights compliant to ICAO Type A, B and FAA L-810 regulations.
100% LED based, these devices offer a red light with a minimum intensity of 32 Cd satisfying the most common applications.
Typically installed on structures below 45 meters and as interim devices on taller structures, low intensity devices are used for night marking only.
4
AW
L 8
10/A
B
AWL 810/AB | PART NO
ICAROBEACON (24V DC) 51010PSU (110/240V AC) 51011SIDE BRACKET 51013
LOW INTENSITYAIRCRAFT WARNING LIGHT
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
INSTALLATION
Pole mounting | Direct (3/4” NPT-F)
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
-25+55
C°PCALBASE DOME
ON SELFextinguishingIP65
SMD
TYPE B
>32CD
4W
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
Low intensity aircraft warning light engineered according to ICAO Low Intensity Type A/B and FAA L-810 regulations.
With a lightweight heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with a red steady light, its optical reflector guarantees a 360° horizontal beam radiation and a vertical beam between +6° and +10°.
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to incadescent bulbs).
DRAWINGS, DIMENSIONS AND WEIGHTS
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
0,60
13
1,5
D 120
5
ICAROAWL 810/AB TWIN | PART NO
BEACON (24V DC) 51014PSU (110/240V AC) 51011SIDE BRACKET 51013
Low intensity aircraft warning light engineered according to ICAO Low Intensity Type A/B and FAA L-810 regulations.With a lightweight heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with a red steady light, its optical reflector guarantees a 360° horizontal beam radiation and a vertical beam between +6° and +10°.
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to incadescent bulbs).
The device is equipped with two separate LED circuits and, thanks to the current sensor installed on board, it automatically switches to the secondary circuit when main fails, with the possibility of sending an alarm signal.
INSTALLATION
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
Twin operations with the same device(back-up circuit included)
Crepuscolar sensor for automated operations
Pole mounting | Direct (3/4” NPT-F)
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
-25+55
C°PCBASE DOME
ON SELFextinguishingIP65AL
SMD
TYPE B
>32CD
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
5W
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
TWINOPERATIONS
DRAWINGS, DIMENSIONS AND WEIGHTS
0,60
13
1,5
D 120
AW
L 8
10/A
B T
WIN
TWINBACK-UPCIRCUIT
INCLUDED
TWIN LOW INTENSITYAIRCRAFT WARNING LIGHT
AW
L 8
10/A
B
AWL 810/AB | PART NO
ICAROBEACON (24V DC) 51010PSU (110/240V AC) 51011SIDE BRACKET 51013
LOW INTENSITYAIRCRAFT WARNING LIGHT
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
INSTALLATION
Pole mounting | Direct (3/4” NPT-F)
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
-25+55
C°PCALBASE DOME
ON SELFextinguishingIP65
SMD
TYPE B
>32CD
4W
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
Low intensity aircraft warning light engineered according to ICAO Low Intensity Type A/B and FAA L-810 regulations.
With a lightweight heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with a red steady light, its optical reflector guarantees a 360° horizontal beam radiation and a vertical beam between +6° and +10°.
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to incadescent bulbs).
DRAWINGS, DIMENSIONS AND WEIGHTS
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
0,60
13
1,5
D 120
6
AW
L 8
64/B
C
AWL 864/BC | PART NO
BEACON 20/55V DC 51016BEACON 240V AC 51017FLAT MOUNTER 51031SIDE BRACKET 51030
MEDIUM INTENSITYAIRCRAFT WARNING LIGHT
Medium intensity aircraft warning light engineered according to ICAO Medium Intensity Type B/C and FAA L-864 regulations.With an induced air heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with a steady/flashing red light, its optical lenses guarantee a 360° horizontal beam radiation and a vertical beam of +3°. Can be configured to Type B (flashing) or Type C (steady).
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to xenon discharge bulbs).
The device is equipped with three spirit balls for perfect installation and can send an alarm signal in case of malfunction.
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
INSTALLATION
Flat mounting | To flat surfaces using the accessory “Flat mounter”
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
DRAWINGS, DIMENSIONS AND WEIGHTS
3,7
-45+55
C° ON SELFEXTINGUISHINGIP66
BASE
AL
SMD
TYPE B/C
2000CD
TYPE B
9WTYPE C
54W
PYREXDOME
TYPE B
1F 20+/-5
FPM
CONDENSEFREE
ENVIRONMENT
225
117
ICARO
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
7
AW
L 8
64/B
C
AWL 864/BC | PART NO
BEACON 20/55V DC 51016BEACON 240V AC 51017FLAT MOUNTER 51031SIDE BRACKET 51030
MEDIUM INTENSITYAIRCRAFT WARNING LIGHT
Medium intensity aircraft warning light engineered according to ICAO Medium Intensity Type B/C and FAA L-864 regulations.With an induced air heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with a steady/flashing red light, its optical lenses guarantee a 360° horizontal beam radiation and a vertical beam of +3°. Can be configured to Type B (flashing) or Type C (steady).
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to xenon discharge bulbs).
The device is equipped with three spirit balls for perfect installation and can send an alarm signal in case of malfunction.
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
INSTALLATION
Flat mounting | To flat surfaces using the accessory “Flat mounter”
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
DRAWINGS, DIMENSIONS AND WEIGHTS
3,7
-45+55
C° ON SELFEXTINGUISHINGIP66
BASE
AL
SMD
TYPE B/C
2000CD
TYPE B
9WTYPE C
54W
PYREXDOME
TYPE B
1F 20+/-5
FPM
CONDENSEFREE
ENVIRONMENT
225
117
ICARO
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
ICARO
AW
L 8
64/B
C T
WIN
AWL 864/BC TWIN | PART NO
BEACON 20/55V DC 51018BEACON 240V AC 51019FLAT MOUNTER 51031SIDE BRACKET 51030
TWIN MEDIUM INTENSITYAIRCRAFT WARNING LIGHT
Medium intensity aircraft warning light engineered according to ICAO Medium Intensity Type B/C and FAA L-864 regulations.With an induced air heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with a steady/flashing red light, its optical lenses guarantee a 360° horizontal beam radiation and a vertical beam of +3°. Can be configured to Type B (flashing) or Type C (steady).
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to xenon discharge bulbs).
The device is equipped with two separate LED circuits and, thanks to the current sensor installed on board, it automatically switches to the secondary circuit when main fails, with the possibility of sending an alarm signal.
The device is equipped with three spirit balls for perfect installation and can send an alarm signal in case of malfunction.
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
Twin operations with the same device(back-up circuit included)
INSTALLATION
Flat mounting | To flat surfaces using the accessory “Flat mounter”
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
-45+55
C° ON SELFEXTINGUISHINGIP66
BASE
AL
SMD
TYPE B/C
2000CD
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
TYPE B
9WTYPE C
54W
DRAWINGS, DIMENSIONS AND WEIGHTS
PYREXDOME
TYPE B
1F 20
FPM
CONDENSEFREE
ENVIRONMENT
TWINOPERATIONS
TWINBACK-UPCIRCUIT
INCLUDED
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
4,0
225
117
8
ICARO
AW
L 8
65.8
66/A
AWL 865.866/A | PART NO
BEACON 20/55V DC 51020BEACON 240V AC 51021FLAT MOUNTER 51031SIDE BRACKET 51030
MEDIUM INTENSITYAIRCRAFT WARNING LIGHT
Medium intensity aircraft warning light engineered according to ICAO Medium Intensity Type A and FAA L-865/L-866 regulations.With an induced air heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with a flashing white light, its optical lenses guarantee a 360° horizontal beam radiation and a vertical beam of +3°.
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to xenon discharge bulbs).
The device is equipped with three spirit balls for perfect installation and can send an alarm signal in case of malfunctioning.
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
INSTALLATION
Flat mounting | To flat surfaces using the accessory “Flat mounter”
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
-45+55
C° ON SELFEXTINGUISHINGIP66
BASE
AL
SMD 20000CD
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
DAY
51W
DRAWINGS, DIMENSIONS AND WEIGHTS
4,0
PYREXDOME
1F 20
FPM
2000CD
NIGHT
13W
CONDENSEFREE
ENVIRONMENT
1F 20
FPM
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
225
117
9
ICARO
AW
L 8
65.8
66/A
AWL 865.866/A | PART NO
BEACON 20/55V DC 51020BEACON 240V AC 51021FLAT MOUNTER 51031SIDE BRACKET 51030
MEDIUM INTENSITYAIRCRAFT WARNING LIGHT
Medium intensity aircraft warning light engineered according to ICAO Medium Intensity Type A and FAA L-865/L-866 regulations.With an induced air heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with a flashing white light, its optical lenses guarantee a 360° horizontal beam radiation and a vertical beam of +3°.
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to xenon discharge bulbs).
The device is equipped with three spirit balls for perfect installation and can send an alarm signal in case of malfunctioning.
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
INSTALLATION
Flat mounting | To flat surfaces using the accessory “Flat mounter”
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
-45+55
C° ON SELFEXTINGUISHINGIP66
BASE
AL
SMD 20000CD
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
DAY
51W
DRAWINGS, DIMENSIONS AND WEIGHTS
4,0
PYREXDOME
1F 20
FPM
2000CD
NIGHT
13W
CONDENSEFREE
ENVIRONMENT
1F 20
FPM
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
225
117
ICARO
AW
L 8
64+8
65.8
66/B
C+A
AWL 864+865.866/BC+A | PART NO
BEACON 20/55V DC 51022BEACON 240V AC 51023FLAT MOUNTER 51031SIDE BRACKET 51030
DUAL MEDIUM INTENSITYAIRCRAFT WARNING LIGHT
Medium intensity aircraft warning light engineered according to ICAO Medium Intensity Type A + Type B/C and FAA L-865/L-866 + L-864 regulations.With an induced air heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with both a steady/flashing red light (Type BC) and a flashing white light (Type A), its optical lenses guarantee a 360° horizontal beam radiation and a vertical beam of +3°.
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to xenon discharge bulbs).
The device is equipped with three spirit balls for perfect installation and can send an alarm signal in case of malfunction.
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
Dual functionality (Type A + Type B/C)
INSTALLATION
Flat mounting | To flat surfaces using the accessory “Flat mounter”
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
-45+55
C° ON SELFEXTINGUISHINGIP66
BASE
AL
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
DRAWINGS, DIMENSIONS AND WEIGHTS
6,0
PYREXDOME
CONDENSEFREE
ENVIRONMENT
DUALTYPE A +TYPE BC
TYPE B/C
2000CD
TYPE B
9WTYPE C
54WTYPE B
1F 20
FPM
TYPE BC
TYPE A
SMD 20000CD
DAY
51W 1F 20
FPM
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
225
180
10
ICARO
AW
L 8
56.8
57/A
B
AWL 856.857/AB | PART NO
BEACON 240V AC (120°) 51024BEACON 240V AC (360°) 51025FLAT MOUNTER 51031SIDE BRACKET 51030
HIGH INTENSITYAIRCRAFT WARNING LIGHT
High intensity aircraft warning light engineered according to ICAO High Intensity Type A/B and FAA L-856/L-857 regulations.With an induced air heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with a flashing white light, its optical lenses guarantee a 120°/360° horizontal beam radiation and a vertical beam of +3°/7°. Can be configured to Type A (100.000 Cd twilight use) or Type B (200.000 Cd day use).
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to xenon discharge bulbs).
The device is equipped with three spirit balls for perfect installation and can send an alarm signal in case of malfunction.
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
120° or 360° versions available
INSTALLATION
Flat mounting | To flat surfaces using the accessory “Flat mounter”
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
DRAWINGS, DIMENSIONS AND WEIGHTS
-45+55
C° ON SELFEXTINGUISHINGIP66
BASE
AL
SMD 200000CD
DAY
226W
PYREXDOME
1F 20
FPM
100000CD
TWILIGHT
110W 1F 20
FPM
CONDENSEFREE
ENVIRONMENT
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
566
225
12,0
11
ICARO
HELIX
AWL HELIX | PART NO
KEY CHARACTERISTICS
INSTALLATION
BEACON (24V DC) 51012PSU (110/240V AC) 51011SIDE BRACKET 51013
LOW INTENSITYHELIPAD PERIMETER LIGHT
LED technology
Product life >10 years
Low consumption
Stabilized light output
Pole mounting | Direct (3/4” NPT-F)
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
-25+55
C°PCALBASE DOME
ON SELFextinguishingIP65
SMD >32CD
5W
TYPICAL APPLICATIONS
HELIPADS
CERTIFICATIONS
IRRADIATION BEAM
Low intensity helipad perimeter light.
With a lightweight heatsink base, this device is the ideal solution for an efficient and long lasting quality perimeter beacon.
Provided with a green steady light, this device has 2 light sources: horizontal and vertical. The horizontal light is equipped with an optical reflector that guarantees a 360° horizontal beam radiation and a vertical beam of +10°. The vertical light has a horizontal beam radiation of 360° and a vertical beam of 120°.
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to incandescent bulbs).
DRAWINGS, DIMENSIONS AND WEIGHTSHORIZONTAL LIGHT = 10°VERTICAL LIGHT = 120°
HORIZONTAL LIGHT = 360°VERTICAL LIGHT = 360°
SIDE VIEWVERTICAL IRRADIATION
TOP VIEWHORIZONTAL IRRADIATION
13
1,5
D 120
0,60
ICARO
AW
L 8
56.8
57/A
B
AWL 856.857/AB | PART NO
BEACON 240V AC (120°) 51024BEACON 240V AC (360°) 51025FLAT MOUNTER 51031SIDE BRACKET 51030
HIGH INTENSITYAIRCRAFT WARNING LIGHT
High intensity aircraft warning light engineered according to ICAO High Intensity Type A/B and FAA L-856/L-857 regulations.With an induced air heatsink base, this device is the ideal solution for an efficient and long lasting quality obstruction beacon.
Provided with a flashing white light, its optical lenses guarantee a 120°/360° horizontal beam radiation and a vertical beam of +3°/7°. Can be configured to Type A (100.000 Cd twilight use) or Type B (200.000 Cd day use).
The LED circuit guarantees a long product life estimated in over 10 years, as well as low consumption (1/10 when compared to xenon discharge bulbs).
The device is equipped with three spirit balls for perfect installation and can send an alarm signal in case of malfunction.
KEY CHARACTERISTICS
LED technology
Product life >10 years
Low consumption
Stabilized light output
120° or 360° versions available
INSTALLATION
Flat mounting | To flat surfaces using the accessory “Flat mounter”
Side mounting | To side walls, side poles or side structures using the accessory “Side bracket”
CERTIFICATIONS
ICAO International Standards and Recommended Practices:Aerodromes – Annex 14 Volume 1, 4th Edition, November 2004Chapter 6
FAA Advisor Circular AC150/5345-43F
DRAWINGS, DIMENSIONS AND WEIGHTS
-45+55
C° ON SELFEXTINGUISHINGIP66
BASE
AL
SMD 200000CD
DAY
226W
PYREXDOME
1F 20
FPM
100000CD
TWILIGHT
110W 1F 20
FPM
CONDENSEFREE
ENVIRONMENT
TYPICAL APPLICATIONS
CRANES
BUILDINGS
INFRA-STRUCTURES
PYLONS
WATERTANKS
WINDTURBINES
AIRPORTSCHIMNEYS
566
225
12,0
LOW INTENSITYsteady red
Part: AWL 810/AB
DAY: OFFNIGHT: STEADY RED
LOW INTENSITYLOW INTENSITYLOW INTENSITY
LOW INTENSITY12
Aircraft Warning LightsICARO
SUGGESTEDCONFIGURATIONS
ELEVATED STRUCTURES <45 m
ELEVATED STRUCTURES <105 m
DAY: FLASHING WHITENIGHT: FLASHING WHITE
MEDIUM INTENSITY
MEDIUM INTENSITYflashing white
Part: AWL 865.866/A
MEDIUM INTENSITYMEDIUM INTENSITYMEDIUM INTENSITY
DAY: FLASHING WHITENIGHT: FLASHING RED
DUALMEDIUM INTENSITY
flashing white + flashing redPart: AWL 864+865.6/BC+A
LOW INTENSITYsteady red
Part: AWL 810/AB
H/2
MA
X 5
2m
H/2
MA
X 5
2m
DAY: FLASHING WHITENIGHT: STEADY RED
MEDIUM INTENSITY
DUALMEDIUM INTENSITY
flashing white + steady redPart: AWL 864+865.6/BC+A
MEDIUM INTENSITYsteady red
Part: AWL 864/BC
MEDIUM INTENSITYflashing red
Part: AWL 864/BC
DAY: OFF NIGHT: FLASHING RED
LOW INTENSITYsteady red
Part: AWL 810/AB
MEDIUM INTENSITYsteady red
Part: AWL 864/BC
MEDIUM INTENSITYsteady red
Part: AWL 864/BC
DAY: OFF NIGHT: STEADY RED
MEDIUM INTENSITY
MA
RK
ED
NO
T M
AR
KED
H/2
MA
X 5
2m
H/2
MA
X 5
2m
13
MEDIUM AND LOW INTENSITY
MEDIUM AND LOW INTENSITY
ELEVATED STRUCTURES <15O m
DAY: FLASHING WHITENIGHT: FLASHING WHITE
MEDIUM INTENSITY
MEDIUM INTENSITYflashing white
Part: AWL 865.866/A
MEDIUM INTENSITYflashing white
Part: AWL 865.866/A
DAY: FLASHING WHITENIGHT: FLASHING RED
MEDIUM AND LOW INTENSITY
DUALMEDIUM INTENSITY
flashing white + flashing redPart: AWL 864+865.6/BC+A
LOW INTENSITYsteady red
Part: AWL 810/AB
DUALMEDIUM INTENSITY
flashing white + flashing redPart: AWL 864+865.6/BC+A
LOW INTENSITYsteady red
Part: AWL 810/AB
DAY: FLASHING WHITENIGHT: STEADY RED
DUALMEDIUM INTENSITY
flashing white + steady redPart: AWL 864+865.6/BC+A
DUALMEDIUM INTENSITY
flashing white + steady redPart: AWL 864+865.6/BC+A
DAY: OFFNIGHT: FLASHING RED
MEDIUM INTENSITYflashing red
Part: AWL 864/BC
LOW INTENSITYsteady red
Part: AWL 810/AB
MEDIUM INTENSITYflashing red
Part: AWL 864/BC
LOW INTENSITYsteady red
Part: AWL 810/AB
DAY: OFFNIGHT: STEADY RED
MEDIUM AND LOW INTENSITY
MEDIUM INTENSITYsteady red
Part: AWL 864/BC
MEDIUM INTENSITYsteady red
Part: AWL 864/BC
MEDIUM INTENSITYsteady red
Part: AWL 864/BC
MEDIUM INTENSITYsteady red
Part: AWL 864/BC
NO
T M
AR
KED
MA
RK
ED
MEDIUM INTENSITYsteady red
Part: AWL 864/BC
MEDIUM INTENSITY
MEDIUM INTENSITYsteady red
Part: AWL 864/BC
MEDIUM INTENSITY
MEDIUM INTENSITY
MA
X 1
04
mM
AX
10
4m
MA
X 1
04
mM
AX
10
4m
H/2
H/2
MA
X 1
04
H/2H/2
MA
X 1
04
H/2H/2
MA
X 1
04
mM
AX
10
4m
H/2
H/2
MA
X 1
04
H/2H/2
MA
X 1
04
H/2H/2
14 MEDIUM INTENSITY
ELEVATED STRUCTURES >150 mM
AX
10
5m
M
AX
10
5m
M
AX
10
5m
HIGH INTENSITYflashing white
Part: AWL 856.857/AB
HIGH INTENSITYflashing white
Part: AWL 856.857/AB
HIGH INTENSITYflashing white
Part: AWL 856.857/AB
DAY: FLASHING WHITENIGHT: FLASHING RED
DUAL HIGH + MID INTENSITY
flashing white + flashing redPart: AWL 856.7+864/AB+BC
LOW INTENSITYsteady red
Part: AWL 810/AB
DUAL HIGH + MID INTENSITY
flashing white + flashing redPart: AWL 856.7+864/AB+BC
LOW INTENSITYsteady red
Part: AWL 810/AB
DUAL HIGH + MID INTENSITY
flashing white + flashing redPart: AWL 856.7+864/AB+BC
LOW INTENSITYsteady red
Part: AWL 810/AB
HIGH AND LOW INTENSITY
MEDIUM INTENSITYflashing white
Part: AWL 865.866/A
MEDIUM INTENSITYflashing white
Part: AWL 865.866/A
MEDIUM INTENSITYflashing white
Part: AWL 865.866/A
DAY: FLASHING WHITENIGHT: FLASHING RED
MEDIUM AND LOW INTENSITY
LOW INTENSITYsteady red
Part: AWL 810/AB
DUAL MEDIUM INTENSITY
flashing white + flashing redPart: AWL 864+865.6/BC+A
LOW INTENSITYsteady red
Part: AWL 810/AB
DUAL MEDIUM INTENSITY
flashing white + flashing redPart: AWL 864+865.6/BC+A
LOW INTENSITYsteady red
Part: AWL 810/AB
DUAL MEDIUM INTENSITY
flashing white + flashing redPart: AWL 864+865.6/BC+A
DUAL DUAL DUAL
NO
T M
AR
KED
NO
T M
AR
KED
MA
RK
ED
DAY: FLASHING WHITENIGHT: FLASHING WHITE
HIGH INTENSITY
DAY: FLASHING WHITENIGHT: FLASHING WHITE
DAY: FLASHING WHITENIGHT: STEADY RED
DUAL HIGH + MID INTENSITY
flashing white + steady redPart: AWL 856.7+864/AB+BC
MEDIUM INTENSITYsteady red
Part: AWL 864/BC
MEDIUM INTENSITYsteady red
Part: AWL 864/BC
MEDIUM INTENSITYsteady red
Part: AWL 864/BC
HIGH AND MEDIUM INTENSITY
DUAL HIGH + MID INTENSITY
flashing white + steady edPart: AWL 856.7+864/AB+BC
DUAL HIGH + MID INTENSITY
flashing white + steady redPart: AWL 856.7+864/AB+BC
DAY: FLASHING WHITENIGHT: STEADY RED
DUAL MEDIUM INTENSITY
flashing white + steady redPart: AWL 864+865.6/BC+A
MEDIUM INTENSITYsteady red
Part: AWL 864/BC
DUAL MEDIUM INTENSITY
flashing white + steady redPart: AWL 864+865.6/BC+A
MEDIUM INTENSITYsteady red
Part: AWL 864/BC
DUAL MEDIUM INTENSITY
flashing white + steady redPart: AWL 864+865.6/BC+A
MEDIUM INTENSITYsteady red
Part: AWL 864/BC
MEDIUM INTENSITY
MA
X 1
05
m
MA
X 1
05
m
MA
X 1
05
m
H/2
H/2
H/2
MA
X 1
05
m
MA
X 1
05
m
MA
X 1
05
m
H/2
H/2
H/2
MA
X 1
05
m
MA
X 1
05
m
MA
X 1
05
m
MEDIUM INTENSITY
AC
CES
SO
RIE
S FLAT MOUNTERStainless steel flat mounter, can be used to mount Medium Intensity and High Intensity AWL to flat surfaces
SIDE BRACKETS
Allows lateral mounting to walls, side poles or side structures. Available for AWL 810/HELIX (Low Intensity AWL) and for AWL 86X/85X (Medium and High Intensity AWL)
AWL 810/HELIX PSU110/240V AC Power Supply Unit for AWL 810 and HELIX devices
AWL GPS SYNCRONISATION MODULESyncronisation module, allows syncronous and catenary flashing via GPS signal wirelessly
ICARO
Ø7
2"
Ø9
1"
1 2"
112"
34
"
47
90
AWL 86X/85X(medium + high intensity)
AWL 810/HELIX(low intensity)
2 MOUNTERSINCLUDED
AWL 810/HELIX PSU 51011
0,2
810/HELIX
86X/85X
AWL 86X/85X FLAT MOUNTER 51031(includes 2 mounters)
AWL GPS SYNC MODULE 51032
61
102
120
6
115
136
Ø7
2"
Ø9
1"1 2
"
112"
34
"
88
162
0,7
0,7
AWL 810/HELIX SIDE BRACKET 51013AWL 86X/85X SIDE BRACKET 51030
1,4
16