Upload
vanbao
View
453
Download
19
Embed Size (px)
Citation preview
Release 6.1
Maximo User�s Guide Addendum
IBM Maximo Asset Configuration Manager
This edition applies to version 6, release 1 of IBM Maximo Asset Configuration Manager and to all subsequent releases and modifications until otherwise indicated in new editions.
Third-Party Technology: Certain Maximo products contain technology provided under license from third parties, as noted in the following table:
Open Source: Maximo contains computer software obtained from the public domain, known as "Open Source" ownership of which is attributed as follows: Portions © 2002, Steve Souza ([email protected]). Portions © 2000-2004, Jason Hunter & Brett McLaughlin. Portions © 2004-2005, The Apache Software Foundation (http://www.apache.org/).
© Copyright International Business Machines Corporation 2007. All rights reserved.
US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
IBM Product Third-Party Information
All Products Portions © 1996-2003 Visual Mining, Inc. Visual Mining� NetCharts Server provided by Visual Mining, Inc.
IBM Maximo Portions © 1995-2004 Actuate Corporation.
Portions © 2005 BEA Systems, Inc. BEA WebLogic Server® provided by BEA Systems, Inc.
Portions © 1996-2005, i-net software GmbH. J-Integra for COM® v2.4. © 2004 Intrinsyc Software International, Inc.
Maximo Discovery MSDE Copyright © Microsoft® Corporation.
© 1998-2005 Centennial Software Limited.
IBM Maximo Asset Navigator Portions © 1993-2002 Snowbound� Software Corporation. RasterMaster� Raster imaging technology provided by Snowbound Software Corporation.
IBM Maximo Mobile Portions © 2005 DataMirror, Inc.
Portions © 2000-2005 Zaval Creative Engineering Group.
IBM Maximo Mobile SE Portions © 1996-2005 Syclo, LLC.
NoteBefore using this information and the product it supports, read the information in �Notices� on page Notices-1.
© Copyright IBM Corp. 2007 iii
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viiAudience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viiRelated Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viiSupport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .viii
Chapter 1: Asset Configuration Manager Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Chapter 2: Administration Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1Organizations (CM) Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2Organizations (CM) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Chapter 3: Assets Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1Assets (CM) Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2Asset Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3View Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Assets (CM) Actions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5Install/Remove > Install/Remove . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5Install/Remove > Non Serialized Build Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5Install/Remove > Edit Offsets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5Change > CM Item . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5Change > Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6Change > Serial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6View > CM Item Change History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6View > Registration Change History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6View > Serial Change History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6CM Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6BDI Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Logs (CM) Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7Logs (CM) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
Create Work Orders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8Enter Meter Readings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8Duplicate Log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8Delete Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
New Asset Assemblies (CM) Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
New Asset Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9Sub Assembly Details Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10
New Asset Assemblies (CM) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10Change New Asset Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10Duplicate New Asset Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10Delete New Asset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10Create Meters from CM Build . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10Create Sub Assemblies from CM Build . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11Create Asset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11
Contents
iv IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
Chapter 4: Preventive Maintenance Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1Preventive Maintenance (CM) Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2PM Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2Frequency Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Preventive Maintenance (CM) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3Master PM (CM) Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4Master PM Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4Frequency Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Master PM (CM) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Chapter 5: Work Orders Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1Work Order Tracking (CM) Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2Work Order Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2Actuals Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Work Order Tracking (CM) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4Work Package > Create. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4Work Package > Add Work Orders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-4Work Package > Remove Work Orders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4Deferrals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4Install/Remove Asset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Chapter 6: Asset Configuration Manager Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1CM Item Master (CM) Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2CM Item Master (CM) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Add to Item Master . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3Duplicate Item. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3Delete Item . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Technical Records (CM) Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Technical Record Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4Build Items Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4CM Items Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5Models Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5Build Positions Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5Maintenance Plan Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6Asset Status Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Technical Records (CM) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7Change Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7Create Associated PMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7Duplicate Technical Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8Delete Technical Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
Models (CM) Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
Model Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8Configurations Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9Build Hierarchy Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10Position Rules Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11Advanced Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13
Models (CM) Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14Change Variation Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14Delete Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-14
Contents v
Chapter 7: Asset Configuration Manager Database Tables and Columns . . . . . . . . . . . . . . . . . . . . 7-1ASSET Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1ASSETMETER Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1MASTERPM Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2MASTERPMMETER Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2PLUSAANBDISTATUS Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2PLUSAANTRAN Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3PLUSACACAT Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3PLUSACACATSR Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3PLUSACAXMASTERPM Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4PLUSACMAPPLE Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4PLUSACMBUILD Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5PLUSACMBUILDITEM Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5PLUSACMCONFIG Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6PLUSACMFLAG Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6PLUSACMFORMULA Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6PLUSACMLABEL Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7PLUSACMMODEL Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7PLUSACMPATH Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8PLUSACMREVISION Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8PLUSACMSTEP Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9PLUSACMXCAT Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9PLUSACMXCOMPUTE Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9PLUSACREW Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10PLUSADEF Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10PLUSADEFEXT Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11PLUSALFCNTOFFSET Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12PLUSALFDEFERRAL Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12PLUSALFEVENT Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13PLUSALFEVTOFFSET Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13PLUSALFPMACTION Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-14PLUSALOGENTRY Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-14PLUSALOGS Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-15PLUSANASSETMETER Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-15PLUSANBDIMAPPING Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-16PLUSANEWASSET Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-17PLUSANEWSUB Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-18PLUSANEWSUBMETER Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-18PLUSASAASSETCAT Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-19PLUSASAASSETSN Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-19PLUSASADEFERRAL Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-19PLUSASAEICONFIG Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-20PLUSASAEIREG Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-20PLUSASANONSERIAL Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-21PLUSASAONOFF Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-21PLUSASAPMACTION Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-22PLUSATR Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-22PLUSATRASSET Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-23PLUSATRASSETSTAT Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-23PLUSATRBUILD Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-23PLUSATRBUILDITEM Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-24PLUSATRCAT Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-24PLUSATREVENT Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-25PLUSATRMODEL Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-25PLUSATRSTATUS Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-26PM Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-26PMMETER Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-26
vi IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
TICKET Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-27WORKORDER Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-27
Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notices-1
© Copyright IBM Corp. 2007 vii
About This Guide
This section explains how this guide can help you to use IBM® Maximo® Asset Configuration Manager. It also provides information about other IBM Corporation resources available to you, such as additional documentation and support.
Audience
This addendum to the IBM Maximo User�s Guide is for people who use Maximo Asset Configuration Manager. This solution extends certain existing Maximo applications and also provides new Maximo applications designed specifically for Asset Configuration Manager customers.
Related Documentation
For more information about Maximo and the Asset Configuration Manager, see the following documentation. The IBM Maximo Asset Configuration Manager Installation Guide is a separate document delivered in Adobe® Systems� Portable Document Format (PDF) with the product software. Use the guide with the standard Maximo documentation set.
Document Description
IBM Maximo Asset Configuration Manager Installation Guide
Describes how to install the IBM Maximo Asset Configuration Manager
IBM Maximo Finance Manager�s Guide
Describes how IBM Maximo completes financial transactions and how to set up general ledger accounts.
IBM Maximo Installation Guide Describes how to install and configure the following software:
! Application server! IBM Maximo! Actuate®
IBM Maximo Multisite Administrator�s Guide
Describes how to configure IBM Maximo for a Multisite implementation.
IBM Maximo Online Help Provides step-by-step procedures for Maximo applications.
Support
viii IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
Support
IBM Corporation users with a valid Annual Customer Support Plan (ACSP) can obtain product support online at Support Online: support.mro.com.
Support Online includes information about product releases, software patches, and documentation updates. To find the most current version of a document, see the Knowledge Base on this site.
IBM Maximo Reconciliation Implementation Guide
Describes how to use the IBM Maximo Reconciliation module to reconcile the two types of information that IBM Maximo maintains about information technology (IT) assets: IT asset data and deployed asset data.
IBM Maximo Report Administration and Development Guide
Describes how to use Actuate to design and administer IBM Maximo reports.
IBM Maximo System Administrator�s Guide
Describes database configuration, security, and other administrative level applications and tasks.
IBM Maximo User�s Guide Provides an overview of the Maximo end-user applications. It also describes how the IBM Maximo applications interact with each other.
IBM Maximo Workflow Implementation Guide
Provides information about how to use IBM Maximo to plan, design, build, test, implement, and manage Workflow processes.
IBM Maximo Enterprise Adapter (MEA) System Administrator's Guide
Describes how to configure and use the IBM MEA.
Document Description
© Copyright IBM Corp. 2007 1-1
Configuration management is the specification of allowable as-designed asset assemblies (models) and as-maintained physical builds. It ensures that the actual physical build of an asset meets the requirements of an allowable configuration.
You use the IBM Maximo Asset Configuration Manager to manage the builds of such high-value, complex, and regulated assets as aircraft, submarines, missiles, and so on. IBM Maximo Asset Configuration Manager is a rules-based configuration management system. It is based on MIL-STD-1388-2B, a United States military standard that uses the Logistics Support Analysis Record (LSAR).
The Build Data Interpreter The Build Data Interpreter (BDI) is the centerpiece of the Asset Configuration Manager. The BDI provides comprehensive status derivation for aircraft and other configuration-managed assets. For example, the BDI checks the actual aircraft, position-by-position, to verify that its configuration rules are in compliance with its nominated configuration. The BDI reports the status of non-compliance assets through a dialog box in the Assets (CM) application. It also alerts users to problem assets through color-coded data in various applications.
As Of Dates Another major feature of the Asset Configuration Manager is its ability to display the structure of an asset as of a past date. This feature is in the Assets (CM) application. That application also displays maintenance, meter, installation, and removal history as of a past date.
Asset Configuration Manager Applications
The Asset Configuration Manager contains five new applications that are designed specifically for asset configuration management. Five additional enhanced, or �cloned,� Maximo applications include configuration manager-specific fields, features, and actions. The unmodified standard version of these applications remains in the product.
The following table provides a brief overview of the configuration-manager functions that you can perform in the new and cloned applications.
Asset Configuration Manager Features 1
1-2 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
Asset Configuration Manager Features
Application Asset Configuration Manager Functions
Organizations (CM) ! Specify default label system, label width, and position code width.
! Specify if you plan to use EBNF expressions to manage linear assets.
! Specify if you plan to record offsets to meter usage.
Assets (CM) ! Define configuration-managed assets.
! View the structure of an asset as of a specific date.
! View the meter, maintenance, installation, and removal history of an asset, as of a specific date.
! Change CM item, registration, and serial numbers associated with an asset.
! View history of CM items, registrations, and serial numbers associated with an asset.
! View configuration rules for an asset.
! Install an asset to a serialized or non-serialized build position.
! Edit offsets to meter usage.
! Convert an asset to a new configuration.
! Update BDI status of an asset.
Logs (CM) ! Record trip details.
! Record problems that occurred during trips.
! Record maintenance recommendations.
! Generate work orders for recommended maintenance.
! Record crew information and certifications.
! Check crew qualifications.
! Enter meter readings.
Asset Configuration Manager Features 1-3
New Asset Assemblies (CM) ! Create virtual assets that remain separate from production data until ready for production.
! Assign and initialize meters for end items and subassemblies.
! Generate identifiers and serial numbers for subassembly components.
! Generate new production assets.
! Update existing production assets.
Preventive Maintenance (CM) ! Define PM records for configuration-managed assets.
! Specify interdependencies among PMs.
! Define warning and alert intervals.
! Specify complex due date expressions.
Master PM (CM) ! Define master PM records for configuration-managed assets.
! Specify interdependencies among master PMs.
! Define warning and alert intervals.
! Specify complex due date expressions.
! Create associated PM records for CM items.
Work Order Tracking (CM) ! Define CM work orders.
! Install and remove assets associated with work orders.
! Create work packages of related work orders for parent and child assets.
! Defer work orders.
! Extend deferrals to work orders.
CM Items (CM) ! Define configuration-managed (CM) items.
! Cross-reference CM items to Maximo item masters.
! Create a Maximo item master from a CM item.
! Relate preventive maintenance (PM) records to CM items.
! Identify superseding CM items.
Application Asset Configuration Manager Functions
1-4 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
The remaining chapters of this guide describe the tabs and actions where you perform these activities.
Technical Records (CM) ! Record requirements of technical records.
! Supersede technical records.
! Identify assets affected by technical records.
! Update compliance status of affected assets.
! Generate PMs and schedule required work.
Models (CM) ! Define the structure and build hierarchy of assets.
! Create variations and revisions of models.
! Enable and disable configuration rules for a configuration.
! Define advanced configuration rules.
Application Asset Configuration Manager Functions
© Copyright IBM Corp. 2007 2-1
The Administration module has one cloned application. This chapter provides an overview of the modified and new actions in the cloned application.
For more information about the application, see the help for the application. For more information about standard Maximo applications, see the IBM Maximo User�s Guide.
The Administration module contains the following Asset Configuration Manager-specific application:
Asset Configuration Manager Application in the Administration Module
Administration Module 2
Application Asset Configuration Manager Functions
Organizations (CM) ! Specify default label system, label width, and position code width.
! Specify if you plan to use EBNF expressions to manage linear assets.
! Specify if you plan to record offsets to meter usage.
Organizations (CM) Application
2-2 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
Organizations (CM) Application
You use the Organizations (CM) application to set up organizations and sites for use with Maximo.
Tabs
The Organizations (CM) application has no Asset Configuration Manager-specific tabs.
Organizations (CM) Actions
The Organizations (CM) application has the following new action:
! CM Options
You use the CM Options action to specify Asset Configuration Manager-specific settings for use by the Models (CM) application.
For more information about this action, see the Organizations (CM) help.
CM Options Dialog Box
© Copyright IBM Corp. 2007 3-1
The Assets module has two new Asset Configuration Manager-specific applications and one cloned application. This chapter describes the new applications and provides an overview of new tabs, fields, and actions in the cloned application.
For more information about these applications, see the help for the applications. For more information about standard Maximo applications, see the IBM Maximo User�s Guide.
The Assets module contains the following Asset Configuration Manager-specific applications:
Asset Configuration Manager Applications in the Assets Module
Assets Module 3
Application Asset Configuration Manager Functions
Assets (CM) ! Define configuration-managed assets.
! View the structure of an asset as of a specific date.
! View the meter, maintenance, installation, and removal history of an asset, as of a specific date.
! Change CM item, registration, and serial numbers associated with an asset.
! View history of CM items, registrations, and serial numbers associated with an asset.
! View configuration rules for an asset.
! Install an asset to a serialized or non-serialized build position.
! Edit offsets to meter usage.
! Convert an asset to a new configuration.
! Update BDI status of an asset.
Assets (CM) Application
3-2 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
Assets (CM) Application
You use the Assets (CM) application to manage the physical builds of aircraft and other complex configuration-managed assets. The Build Data Interpreter (BDI) component constantly tracks and validates changes to a build. The BDI flags components that do not comply with defined configuration rules.
Tabs
The Assets (CM) application has the following new or enhanced tabs:
! Asset! View (new)
For information about a field, place the cursor in the field and press Alt+F1.
Logs (CM) ! Record trip details.
! Record problems that occurred during trips.
! Record maintenance recommendations.
! Generate work orders for recommended maintenance.
! Record crew information and certifications.
! Generate information about crew qualifications.
! Enter meter readings.
New Asset Assemblies (CM) ! Create virtual assets that remain separate from production data until ready for production.
! Assign and initialize meters for end items and subassemblies.
! Generate identifiers and serial numbers for subassembly components.
! Generate new production assets.
! Update existing production assets.
Application Asset Configuration Manager Functions
Assets (CM) Application
Assets Module 3-3
Asset Tab
The Asset tab of the Assets (CM) application displays the main record for an asset. You use the Asset tab to add new records to the database and view and modify existing records.
The Asset tab has the following Asset Configuration Manager-specific fields:
! Label! Position! Position Name! CM Item! Registration! Model ! Variation! Revision
Asset Tab
View Tab
You use the View tab in the Assets (CM) application to view the structure and history of an asset, as of a specific date. In some cases, you can update the history.
The key feature of the View tab is the As Of Date field. Use this field to view the asset structure and history as of the current date or a past date.
Assets (CM) Application
3-4 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
View Tab
The View tab contains the following subtabs:
! Initial ! Direct! Summary! Incidents! Maintenance Plan! Maintenance History! Parent History ! Child History ! Position History
Initial Subtab You use the Initial subtab to add, view, modify, or delete initial (anchor) meter readings for an asset.
Direct Subtab You use the Direct subtab to add, view, modify, or delete direct meter readings for an asset. You can view the readings through a specific date.
Summary Subtab You use the Summary subtab to view initial (anchor), indirect (derived), and direct readings for meters installed on an asset. You can view the readings through a specific date.
Incidents Subtab You use the Incidents subtab to add, view, modify, or delete unplanned maintenance events that were open on a specific date. Unplanned maintenance is related to problems recorded on trip logs.
Maintenance Plan Subtab You use the Maintenance Plan subtab to view or modify planned maintenance events that were open on a specific date. Planned maintenance is related to preventive maintenance records (PMs) and technical records.
Maintenance History Subtab
You use the Maintenance History subtab to view planned and unplanned maintenance that was complete on a specific date.
Parent History Subtab You use the Parent History subtab to view, modify, or delete the history of parent assets. The subtab displays parent assets to which a selected child asset was installed or removed, through a specific date.
Child History Subtab You use the Child History subtab to view, modify, or delete the history of child assets. This subtab displays child assets installed to and removed from a selected parent asset, through a specific date. The subtab displays child assets only, not grandchild assets.
Assets (CM) Application
Assets Module 3-5
Position History Subtab You use the Position History subtab to view, modify, or delete assets installed to or removed from a build position, through a specific date.
Assets (CM) Actions
The Assets (CM) application has the following Asset Configuration Manager-specific actions:
! Install/Remove > Install/Remove! Install/Remove > Non Serialized Build Position! Install/Remove > Edit Offsets! Change > CM Item! Change > Registration! Change > Serial! View > CM Item Change History! View > Registration Change History! View > Serial Change History ! CM Rules! BDI Status
For more information about these actions, see the Assets (CM) help.
Install/Remove > Install/Remove
You use the Install/Remove > Install/Remove action to perform the following tasks:
! Install a child asset to a parent asset! Remove a child asset from a parent asset! Correct usage offsets for a related meter
The corresponding build position must be serialized.
Install/Remove > Non Serialized Build Position
You use the Install/Remove > Non Serialized Build Position action to perform the following tasks:
! Install an asset to a non-serialized build position! Remove an asset from a non-serialized build position
Install/Remove > Edit Offsets
You use the Install/Remove > Edit Offsets action to correct an offset to meter usage. The meter must be associated with the installation or removal of an asset in a serialized build position.
Change > CM Item
You use the Change > CM Item action to change the CM item associated with an asset. The application displays the CM item history through a date that you specify. You can add, modify, or delete rows.
Assets (CM) Application
3-6 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
Change > Registration
You use the Change > Registration action to change the registration or tail number associated with an asset. The application displays the registration history through a date that you specify. You can add, modify, or delete rows.
Change > Serial
You use the Change > Serial action to change the serial number associated with an asset. The application displays the serial number history through a date that you specify. You can add, modify, or delete rows.
View > CM Item Change History
You use the View > CM Item Change History action to display CM items associated with an asset. The application displays the CM item history through a date that you specify.
View > Registration Change History
You use the View > Registration Change History action to display registrations associated with a node on the View tab. The application displays the registration history through a date that you specify.
View > Serial Change History
You use the View > Serial Change History action to display serial numbers associated with a node on the View tab. The application displays the serial number history through a date that you specify.
CM Rules
You use the CM Rules action to view the configuration rules for a build position. This action displays the same information as the Position Rules tab on the Models (CM) application.
BDI Status
You use the BDI Status action to convert an asset to a new configuration or to update the status of an asset configuration. When you update the status of the current configuration, this action also creates any required maintenance events and build positions for the current configuration.
Logs (CM) Application
Assets Module 3-7
Logs (CM) Application
You use the Logs (CM) application to create and maintain trip logs. Logs include the following information:
! Trip details, such as starting and ending date, time, and location ! Problems that occurred during a trip ! Maintenance recommendations and work orders! Crew and crew certifications
Tabs
The Logs (CM) application has the following tabs:
! List! Logs
The List tab is part of most Maximo applications. For more information about this tab, see the IBM Maximo User�s Guide and the Logs (CM) help.
For information about a field, place the cursor in the field and press Alt + F1.
You use the Logs tab to add, view, modify, or delete a log or trip record. A log can include any number of trips. For each trip, you record trip details such as the date and duration of the trip, starting and ending points, and fuel consumption.
Logs Tab
Logs (CM) Application
3-8 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
The Logs tab has the following subtabs:
! Log Problems! Crew Reporting
Log Problems Subtab You use the Log Problems subtab to record problems that occurred during a trip and related maintenance recommendations and work orders.
Crew Reporting Subtab You use the Crew reporting subtab to record information about the crew of a trip, including the date and duration of certifications used by crew members.
Logs (CM) Actions
The Logs (CM) application has the following Asset Configuration Manager-specific actions:
! Create Work Orders! Enter Meter Readings! Duplicate Log! Delete Log
For more information about these actions, see the Logs (CM) help.
Create Work Orders
You use the Create Work Orders action to generate one or more work orders for problems that occurred during a trip.
Enter Meter Readings
You use the Enter Meter Readings action to report meter readings for an asset.
Duplicate Log
You use the Duplicate Log action to create a log record that is like an existing record.
Delete Log
You use the Delete Log action to delete a log.
New Asset Assemblies (CM) Application
Assets Module 3-9
New Asset Assemblies (CM) ApplicationYou use the New Asset Assemblies (CM) application to perform the following tasks:
! Generate a virtual asset from the corresponding model! Assign asset numbers and serial numbers to subassembly components ! Assign meters to the end item and its subassemblies
A new asset assembly remains separate from production assets. You generate the production asset after you review and update the generated data and confirm that the assembly is ready for production.
TabsThe New Asset Assemblies (CM) application has the following tabs:
! List! New Asset ! Sub Assembly Details
The List tab is part of most Maximo applications. For more information about this tab, see the IBM Maximo User�s Guide and the New Asset Assemblies (CM) help.
For information about a field, place the cursor in the field and press Alt + F1.
New Asset Tab
You use the New Asset tab to create, view, or modify a new asset assembly record. Use this tab to add a new production asset or create asset records for the components of an existing production asset.
New Asset Tab
New Asset Assemblies (CM) Application
3-10 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
Sub Assembly Details Tab
You use the Sub Assembly Details tab to create, view, modify, or delete subassembly components, meters, and initial meter readings.
Sub Assembly Details Tab
New Asset Assemblies (CM) Actions
The Assets Templates (CM) application has the following Asset Configuration Manager-specific actions:
! Change New Asset Status! Duplicate New Asset Assembly! Delete New Asset! Create Meters from CM Build ! Create Sub Assemblies from CM Build! Create Asset
For more information about these actions, see the New Asset Assemblies (CM) help.
Change New Asset Status
You use the Change New Asset Status action to change the status of a new asset assembly.
Duplicate New Asset Assembly
You use the Duplicate New Asset Assembly action to create a new asset assembly record that is like an existing record.
Delete New Asset
You use the Delete New Asset action to delete a new asset assembly.
Create Meters from CM Build
You use the Create Meters from CM Build action to generate a list of meters for a new asset assembly. The application retrieves the meter information from the corresponding model and displays the generated list in the Initial Readings table window on the New Asset tab.
New Asset Assemblies (CM) Application
Assets Module 3-11
Create Sub Assemblies from CM Build
You use the Create Sub Assemblies from CM Build action to generate subassemblies for a new asset assembly.
Create Asset
You use the Create Asset action to create a production asset or update an existing production asset. This action verifies all the data in the new asset assembly, then generates an asset record for the end item and all its components. After this action is complete, you can view the asset data in the Assets (CM) application.
New Asset Assemblies (CM) Application
3-12 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
© Copyright IBM Corp. 2007 4-1
The Preventive Maintenance module has two cloned applications. This chapter provides an overview of new and enhanced tabs, fields, and actions in the cloned applications.
For more information about these applications, see the help for the applications. For more information about standard Maximo applications, see the IBM Maximo User�s Guide.
The Preventive Maintenance module contains the following Asset Configuration Manager-specific applications:
Asset Configuration Manager Applications in the Preventive Maintenance Module
Preventive Maintenance Module 4
Application Asset Configuration Manager Functions
Preventive Maintenance (CM) ! Define PM records for configuration-managed assets.
! Specify interdependencies among PMs.
! Define warning and alert intervals.
! Specify complex due date expressions.
Master PM (CM) ! Define master PM records for configuration-managed assets.
! Specify interdependencies among master PMs.
! Define warning and alert intervals.
! Specify complex due date expressions.
! Create associated PM records for CM items.
Preventive Maintenance (CM) Application
4-2 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
Preventive Maintenance (CM) Application
You use the Preventive Maintenance (CM) application to add, view, and modify preventive maintenance records (PMs). PM records are templates for work orders.
Tabs
The Preventive Maintenance (CM) application has the following enhanced tabs:
! PM! Frequency
PM Tab
The PM tab has the following Asset Configuration Manager-specific fields:
! TR Publication! Action Type! Secondary PM
PM Tab
Preventive Maintenance (CM) Application
Preventive Maintenance Module 4-3
Frequency Tab
The Frequency tab has the following Asset Configuration Manager-specific fields:
! Start Date! Stop Date! State! Alert Interval! Warning Interval! [Due Date] Expression
Frequency Tab
Preventive Maintenance (CM) Actions
The Preventive Maintenance (CM) application has no new or enhanced actions.
Master PM (CM) Application
4-4 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
Master PM (CM) Application
You can use the Master PM (CM) application to add, view, and modify Master PMs, which are templates for other preventive maintenance records (PMs).
Tabs
The Master PM (CM) application has the following enhanced tabs:
! Master PM! Frequency
Master PM Tab
The Master PM tab has the following Asset Configuration Manager-specific fields:
! TR Publication! Action Type! Secondary Master PM
Master PM Tab
Master PM (CM) Application
Preventive Maintenance Module 4-5
Frequency Tab
The Frequency tab has the following Asset Configuration Manager-specific fields:
! Start Date! Stop Date! State! Alert Interval! Warning Interval! [Due Date] Expression
Frequency Tab
Master PM (CM) Actions
The Master PM (CM) application has the following new Asset Configuration Manager-specific action:
! Create Associated PMs for CM Items
You use the Create Associated PMs for CM Items action to create PMs for all assets that contain a CM item. An associated PM is a PM whose scheduling information is based on a Master PM.
For more information about this action, see the Master PM CM) help.
Master PM (CM) Application
4-6 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
© Copyright IBM Corp. 2007 5-1
one
The Work Orders module has one cloned application. This chapter provides an overview of new tabs, fields, and actions in the cloned application.
For more information about the application, see the help for the application. For more information about standard Maximo applications, see the IBM Maximo User�s Guide.
The Work Orders module contains the following Asset Configuration Manager-specific application:
Asset Configuration Manager Application in the Work Orders Module
Work Orders Module 5
Application Asset Configuration Manager Functions
Work Order Tracking (CM) ! Define CM work orders.
! Install and remove assets associated with work orders.
! Create work packages of related work orders for parent and child assets.
! Defer work orders.
! Extend deferrals to work orders.
Work Order Tracking (CM) Application
5-2 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
Work Order Tracking (CM) Application
You use the Work Order Tracking (CM) application to plan, review, and approve work orders for assets and locations.
Tabs
The Work Order Tracking (CM) application has the following enhanced tabs:
! Work Order! Actuals
Work Order Tab
The Work Order tab has the following Asset Configuration Manager-specific fields:
! Deferrals?! Reference! Reference ID! Model! Position! Label! CM Item! Publication! Reason for Repair! Work Accomplished! Part Failure
For information about these fields, place the cursor in the field and press Alt + F1.
Work Order Tracking (CM) Application
Work Orders Module 5-3
Work Order Tab
Actuals Tab
The Materials subtab on the Actuals tab has the following Asset Configuration Manager-specific button:
! Install Asset
You use the Install Asset button to install an asset associated with a work order. The corresponding build position must be serialized.
Actuals Tab
Work Order Tracking (CM) Application
5-4 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
Work Order Tracking (CM) ActionsThe Work Order Tracking (CM) application has the following Asset Configuration Manager-specific actions:
! Work Package > Create! Work Package > Add Work Orders! Work Package> Remove Work Orders! Deferrals! Install/Remove Asset
For more information about these actions, see the Work Order Tracking (CM) help.
Work Package > Create
You use the Work Package > Create action to bundle current due, expected due, and deferred maintenance for an asset and related child and parent assets.
Work Package > Add Work Orders
You use the Work Package > Add Work Orders action to add work orders and PMs to an existing work package.
Work Package > Remove Work Orders
You use the Work Package > Remove Work Orders action to remove a work order from a work package.
Deferrals
You use the Deferrals action to defer a work order. You can defer a work order that is not cancelled, closed, or completed.
You also use this action to extend a deferral to a work order. You can create one or more extensions. The status of the most recent extension must be Active.
Install/Remove Asset
You use the Install/Remove Asset action to install or remove an asset associated with a work order. The corresponding build position must be serialized.
You also use this action to edit an offset to meter usage.
© Copyright IBM Corp. 2007 6-1
The Asset Configuration Manager module has three new Asset Configuration Manager-specific applications. This chapter describes each new application.
For more information about these applications, see the help for the applications. For more information about standard Maximo applications, see the IBM Maximo User�s Guide.
The Asset Configuration Manager module contains the following applications. All these applications are specific to the Asset Configuration Manager.
Applications in the Asset Configuration Manager Module
Asset Configuration Manager Module 6
Application Asset Configuration Manager Function
CM Items (CM) ! Define configuration-managed (CM) items.
! Cross-reference CM items to Maximo item masters.
! Create a Maximo item master from a CM item.
! Relate preventive maintenance (PM) records to CM items.
! Identify superseding CM items.
Technical Records (CM) ! Record requirements of technical records.
! Supersede technical records.
! Identify assets affected by technical records.
! Update compliance status of affected assets.
! Generate PMs and schedule required work.
Models (CM) ! Define the structure and build hierarchy of assets.
! Create variations and revisions of models.
! Enable and disable configuration rules for a configuration.
! Define advanced configuration rules.
CM Item Master (CM) Application
6-2 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
CM Item Master (CM) Application
You use the CM Item Master (CM) application to create and maintain a catalog of configuration-managed (CM) items.
Tabs
The CM Item Master (CM) application has the following tabs:
! List! CM Item
The List tab is part of most Maximo applications. For more information about this tab, see the IBM Maximo User�s Guide and the CM Item Master (CM) help.
For information about a field, place the cursor in the field and press Alt + F1.
You use the CM Item tab to add, view, modify, or delete a configuration-managed (CM) item.
CM Item Tab
Technical Records (CM) Application
Asset Configuration Manager Module 6-3
CM Item Master (CM) Actions
The CM Item Master (CM) application has the following Asset Configuration Manager-specific actions:
! Add to Item Master! Duplicate Item! Delete Item
For more information about these actions, see the CM Item Master (CM) help.
Add to Item Master
You use the Add to Item Master action to associate a CM item with one or more assets. The CM Items (CM) application adds the part just as if you added it through the Inventory Item Master application.
Duplicate Item
You use the Duplicate CM Item action to create a CM item record that is like an existing record.
Delete Item
You use the Delete CM Item action to delete a CM item.
Technical Records (CM) Application
You use the Technical Records (CM) application to record technical records from manufacturers, vendors, regulatory agencies, and others. The application maintains the following information about a technical record:
! Identifying details! Affected assets ! PMs and job plans for implementing work requirements ! Status or method of compliance of each affected asset
Tabs
The Technical Records (CM) application has the following tabs:
! Technical Record! Build Items ! CM Items ! Models! Build Positions! Maintenance Plan! Asset Status
Technical Records (CM) Application
6-4 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
Technical Record Tab
You use the Technical Record tab to enter details about a technical publication or identify a superseding technical publication.
Technical Record Tab
Build Items Tab
You use the Build Items tab to enter criteria to identify build items affected by a technical record. The Build Data Interpreter (BDI) uses these criteria to identify affected assets that are associated with the build item. The application displays those models and build positions on the Models and Build Positions tabs, respectively.
Build Items Tab
Technical Records (CM) Application
Asset Configuration Manager Module 6-5
CM Items Tab
You use the CM Items tab to enter criteria to identify CM items affected by a technical record. The Build Data Interpreter (BDI) uses these criteria to identify affected assets that are associated with the CM item. The application displays those models and build positions on the Models and Build Positions tabs, respectively.
CM Items Tab
Models Tab
You use the Models tab to view and update a list of models affected by a technical record. The application compiles a list of affected models based on the criteria that you enter on the Build Items tab or the CM Items tab.
Models Tab
Build Positions Tab
You use the Build Positions tab to view and update a list of build positions affected by a technical record. The application compiles a list of affected build positions based on the criteria that you enter on the Build Items tab or the CM Items tab.
Technical Records (CM) Application
6-6 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
Build Positions Tab
Maintenance Plan Tab
You use the Maintenance Plan tab to enter maintenance plans to correct an issue that a technical record identifies. The Build Data Interpreter (BDI) or the Create Associated PMs action generates a PM for every entry on this tab.
Maintenance Plan Tab
Technical Records (CM) Application
Asset Configuration Manager Module 6-7
Asset Status Tab
You use the Asset Status tab to view the compliance status of assets affected by a technical record. You also use this tab to specify the method of compliance (MOC) for an asset that does not require maintenance.
Asset Status Tab
Technical Records (CM) Actions
The Technical Records (CM) application has the following Asset Configuration Manager-specific actions:
! Change Status! Create Associated PMs! Duplicate Technical Record! Delete Technical Record
For more information about these actions, see the Technical Records (CM) help.
Change Status
You use the Change Status action to change the status of a technical record to Active or Inactive. You cannot change a status to Superseded manually. Maximo changes the status to Superseded when you supersede a record on the Technical Record tab.
Create Associated PMs
You use the Create Associated PMs action to generate PMs immediately and to schedule the work required by a technical record. However, the Build Data Interpreter (BDI) is associated with a cron task that constantly checks for readiness to create PMs. Therefore, you probably do not need to use this action.
Models (CM) Application
6-8 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
Duplicate Technical Record
You use the Duplicate Technical Record action to create a technical record that is like an existing record.
Delete Technical Record
You use the Delete Technical Record action to delete a technical record. You can delete a record only if its status is Draft or Inactive.
Models (CM) Application
Purpose You use the Models (CM) application to define the structure and configuration rules for a configuration-managed assembly.
Tabs
The Models (CM) application has the following tabs:
! List! Model! Configurations! Build Hierarchy! Position Rules! Advanced
For information about a field, place the cursor in the field and press Alt + F1.
Model Tab
You use the Model tab in the Models (CM) application to add, view, or modify a model. You include the following information on this tab:
! Classifications! LCN structure! Build Items ! Labels! CM items
Models (CM) Application
Asset Configuration Manager Module 6-9
Model Tab
Configurations Tab
You use the Configurations tab to add, view, modify, or delete a variation or a revision of a model.
Variations appear in a hierarchy tree, with non-abstract variations in bold text. Each node on the tree represents a variation of the model. The root of the tree is the base variation.
Revisions appear in the Revisions table window.
Models (CM) Application
6-10 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
Configurations Tab
Build Hierarchy Tab
You use the Build Hierarchy tab to add, view, modify, or delete build positions in a model.
Build Hierarchy Tab
Models (CM) Application
Asset Configuration Manager Module 6-11
The Build Hierarchy tab has the following subtabs, which display the same information in different formats.
! Hierarchy Tree! Position List
Hierarchy Tree Subtab You use the Hierarchy Tree subtab to display and modify build positions, using a hierarchical format. Each node of the hierarchy represents a build position and displays the following information about the build position (from left to right):
! Icon that represents the build item ! Default label ! Position code ! Description ! LCN code
Position List Subtab You use the Position List subtab to display and modify build positions, using a tabular format. Each row represents a build position and displays the following information about the build position (from left to right):
! Build item ! Position ! Indicator (end item, subassembly, or installation point) ! Indenture level ! LCN code ! ALC code
You also use this subtab to perform the following tasks:
! Move build positions up or down within the level to which they belong! Delete build positions! Enter information about linear assets
Position Rules Tab
You use the Position Rules tab to enter general information about a build position and to enable and disable configuration rules.
Before you use this tab, you select a build position from either subtab on the Build Hierarchy tab. The information that displays on the Position Rules tab pertains to the revision that appears in the Revision Context field. If multiple revisions of the model exist, the application defaults to the highest active revision, if one exists.
Models (CM) Application
6-12 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
Position Rules Tab
The Position Rules tab has the following subtabs:
! Position! Items! Maintenance Plan! Formulas! Labels
Position Subtab You use the Position subtab of the Position Rules tab to perform the following tasks:
! enter information about a build position! enable and disable configuration rules for a build position
When you enable (disable) a build position rule, the build position becomes valid (not valid) for the selected model or variation.
CM Items Subtab You use the Items subtab of the Position Rules tab to enable and disable configuration rules for a CM item. When you enable (disable) a CM item rule, the CM item becomes valid (not valid) for the selected model or variation and build position.
Maintenance Plan Subtab You use the Maintenance Plan subtab of the Position Rules tab to enable and disable configuration rules for a maintenance plan. When you enable (disable) rules for a maintenance plan, the maintenance plan becomes valid (not valid) for the selected model or variation.
Formulas Subtab You use the Formulas subtab of the Position Rules tab to add formulas to calculated meters and to enable and disable configuration rules for a formula. When you enable (disable) a formula rule, the formula becomes valid (not valid) for the selected model or variation, build position, and meter.
Labels Subtab You use the Labels subtab of the Position Rules tab to enable and disable configuration rules for a label. When you enable (disable) rules for a label, the label becomes valid (not valid) for the selected model or variation.
Models (CM) Application
Asset Configuration Manager Module 6-13
Additional Subtabs Every subtab on the Position Rules tab has the following subtabs:
! Sys on Sys Subtab
You use the Sys on Sys subtab to enable and disable configuration rules for a build position in a model. A hierarchy tree on the subtab displays all models associated with the selected model, including models that are a parent, grandparent, and so on.
By default all the models are selected, which means that the corresponding configuration rules are enabled for all models. To disable the rules for a model, you clear the check box that corresponds to that model.
! Configuration Subtab
You use the Configuration subtab to enable and disable configuration rules for a build position in a variation. A hierarchy tree on the subtab displays all variations for which the build position is valid.
By default all the variations are selected, which means that the corresponding configuration rules are enabled for all variations. To disable the rules for a variation, you clear the check box that corresponds to that variation.
Depending on the type of configuration rule, this subtab might display CM items and serial numbers to which the rule applies. In that case, you can enable and disable rules at the CM item and serial number level.
Advanced Tab
You use the Advanced tab to define secondary configuration rules that depend on primary rules. A primary rule is a rule that you enable or disable on the subtabs of the Position Rules tab in the Models (CM) application.
Advanced Tab
Models (CM) Application
6-14 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
Models (CM) Actions
The Models (CM) application has the following Asset Configuration Manager-specific actions:
! Change Variation Status! Delete Model
For more information about these actions, see the Models (CM) help.
Change Variation Status
You use the Change Variation Status action to change the status of a variation.
Delete Model
You use the Delete Model action to delete a model. If no assets are associated with the model, you can delete it.
© Copyright IBM Corp. 2007 7-1
This chapter lists new Asset Configuration Manager-specific database tables and their columns. It also lists new columns in existing Maximo database tables.
ASSET Table
ASSETMETER Table
Asset Configuration Manager Database Tables and Columns
7Column Type Length
PLUSACATID INTEGER 12
PLUSACONFIGID INTEGER 12
PLUSAMODELID INTEGER 12
PLUSAREG UPPER 20
PLUSAREVISIONID INTEGER 12
Column Type Length
PLUSAANCHORCOUNT DECIMAL 15,2
PLUSAANCHORDATE DATETIME 10
PLUSAISDEFAULT YORN 1
PLUSAISESTIMATED YORN 1
MASTERPM Table
7-2 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
MASTERPM Table
MASTERPMMETER Table
PLUSAANBDISTATUS Table
Column Type Length
PLUSAALERTINT DECIMAL 15,2
PLUSADUEDATEEXP ALN 4000
PLUSAINTACTION UPPER 20
PLUSASTARTDATE DATETIME 10
PLUSASTOPDATE DATETIME 10
PLUSAWARNINT DECIMAL 15,2
Column Type Length
PLUSAALERTINT DECIMAL 15,2
PLUSAWARNINT DECIMAL 15,2
Column Type Length
ASSETID INTEGER 12
CONFIGID INTEGER 12
CURRENTCONFIG YORN 1
HOLDREVISION YORN 1
INACTIVETIME DATETIME 10
MODELID INTEGER 12
NARRATIVE ALN 4000
ORGID UPPER 8
PLUSAANBDISTATUSID INTEGER 12
REVISION INTEGER 12
SITEID UPPER 8
STATUS ALN 25
STATUSEDTIME DATETIME 10
UPDATEDTIME DATETIME 20
PLUSAANTRAN Table
Asset Configuration Manager Database Tables and Columns 7-3
PLUSAANTRAN Table
PLUSACACAT Table
PLUSACACATSR Table
Column Type Length
ASSETID INTEGER 12
ORGID UPPER 8
PLUSAANTRANID INTEGER 12
PRIORITY INTEGER 12
SITEID UPPER 8
Column Type Length
COMPANIESID INTEGER 12
DESCRIPTION ALN 4000
HASLD YORN 1
ITEM UPPER 200
ITEMID INTEGER 12
ITEMSETID UPPER 8
LANGCODE UPPER 4
PART UPPER 80
PLUSACACATID INTEGER 12
REV UPPER 20
SERIALFORMAT UPPER 15
Column Type Length
CATID INTEGER 12
ITEMSETID UPPER 8
PLUSACACATSRID INTEGER 12
SERIALUOC UPPER 20
SREXPRESSION UPPER 4000
PLUSACAXMASTERPM Table
7-4 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
PLUSACAXMASTERPM Table
PLUSACMAPPLE Table
Column Type Length
CATID INTEGER 12
ITEMSETID UPPER 8
MASTERPMID INTEGER 12
PLUSACAXMASTERPMID INTEGER 12
Column Type Length
APPLETYPE UPPER 6
ORGID UPPER 8
PLUSACMAPPLEID INTEGER 12
PRIMARY YORN 1
REVISION INTEGER 12
RULE UPPER 200
RULEPOSITIVE YORN 1
RX1 INTEGER 12
RX2 INTEGER 12
RX3 INTEGER 12
RY1 INTEGER 12
RY2 INTEGER 12
RY3 INTEGER 12
RY4 INTEGER 12
RY5 INTEGER 12
SECONDARYCLAUSE ALN 4000
PLUSACMBUILD Table
Asset Configuration Manager Database Tables and Columns 7-5
PLUSACMBUILD Table
PLUSACMBUILDITEM Table
Column Type Length
ALC UPPER 6
BUILDITEMID INTEGER 12
INDENTURE INTEGER 12
INDICATOR UPPER 1
LCN UPPER 60
LINEAREXPRESSION ALN 4000
MAXLINEARUNITS INTEGER 12
MAXQTY INTEGER 12
MINQTY INTEGER 12
MODELID INTEGER 12
NONSERIALIZED YORN 1
ORGID UPPER 8
PLUSACMBUILDID INTEGER 12
POSITION UPPER 20
Column Type Length
ICON ALN 60
MODELID INTEGER 12
NAME ALN 40
ORGID UPPER 8
PLUSACMBUILDITEMID INTEGER 12
PLUSACMCONFIG Table
7-6 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
PLUSACMCONFIG Table
PLUSACMFLAG Table
PLUSACMFORMULA Table
Column Type Length
ABSTRACT YORN 1
BASE YORN 1
BUILDID INTEGER 12
CATID INTEGER 12
COMMENTS ALN 4000
DESCRIPTION ALN 40
NHCONFIGID INTEGER 12
ORGID UPPER 8
PLUSACMCONFIGID INTEGER 12
STATUS UPPER 20
VARIATION UPPER 20
Column Type Length
BUILDID INTEGER 12
FLAG YORN 1
FLAGTYPE UPPER 20
FOREIGNENTITY UPPER 60
FOREIGNKEY UPPER 60
ORGID UPPER 8
PLUSACMFLAGID INTEGER 12
REVISION INTEGER 12
Column Type Length
FORMULA ALN 4000
NAME UPPER 20
ORGID UPPER 8
PLUSACMFORMULAID INTEGER 12
PLUSACMLABEL Table
Asset Configuration Manager Database Tables and Columns 7-7
PLUSACMLABEL Table
PLUSACMMODEL Table
Column Type Length
BUILDITEMID INTEGER 12
DEFAULTFORPOS UPPER 20
LABEL UPPER 20
LABELSYSTEM UPPER 20
ORGID UPPER 8
PLUSACMLABELID INTEGER 12
Column Type Length
CLASS UPPER 20
CODE UPPER 20
COMMENTS ALN 4000
DESCRIPTION ALN 40
HASLD YORN 1
INSTALLABLE YORN 1
LABELSYSTEM UPPER 20
LANGCODE UPPER 4
LCNSTRUCTURE UPPER 10
MODEL UPPER 20
ORGID UPPER 8
PLUSACMMODELID INTEGER 12
SERIES UPPER 20
TOPLCN UPPER 9
PLUSACMPATH Table
7-8 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
PLUSACMPATH Table
PLUSACMREVISION Table
Column Type Length
ACTIVE YORN 1
LENGTH INTEGER 12
MODELID INTEGER 12
ORGID UPPER 8
PLUSAPATHID INTEGER 12
Column Type Length
ACTIVEDATE DATETIME 19
AUTOUPGRADE YORN 1
AUTOUPGRADEOPTOUT YORN 1
BUILDID INTEGER 12
COMMENTS ALN 4000
DESCRIPTION UPPER 40
DRAFT YORN 1
HASLD YORN 1
INACTIVEDATE DATETIME 10
LANGCODE UPPER 4
ORGID UPPER 8
PLUSACMREVISIONID INTEGER 12
REVISION INTEGER 12
REVISIONDATE DATETIME 10
PLUSACMSTEP Table
Asset Configuration Manager Database Tables and Columns 7-9
PLUSACMSTEP Table
PLUSACMXCAT Table
PLUSACMXCOMPUTE Table
Column Type Length
BUILDID INTEGER 12
ORGID UPPER 8
PATHID INTEGER 12
PATHSTEPS ALN 4000
PLUSACMSTEPID INTEGER 12
STEP INTEGER 12
Column Type Length
BUILDITEMID INTEGER 12
CATID INTEGER 12
ISDEFAULT YORN 1
ORGID UPPER 8
PLUSACMXCATID INTEGER 12
Column Type Length
FORMULAID INTEGER 12
METERID UPPER 25
ORGID UPPER 8
PLUSACMXCOMPUTEID INTEGER 12
PLUSACREW Table
7-10 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
PLUSACREW Table
PLUSADEF Table
Column Type Length
ASSETNUM UPPER 12
CERTIFICATION UPPER 8
COMMENTS ALN 35
COUNT INTEGER 4
DATEUSED DATE 12
DURATION DURATION 8
LOGID UPPER 8
ORGID UPPER 8
PERSON UPPER 30
PLUSACREWID INTEGER 12
QUALIFIED YORN 1
SITEID UPPER 8
TRIPNUM UPPER 8
UTILIZATION UPPER 10
Column Type Length
ADJUST YORN 1
COMMENTS ALN 25
DURATION INTEGER 12
EXTDATE DATETIME 10
HASLD YORN 1
LANGCODE UPPER 4
ORGID UPPER 8
ORIGDATE DATETIME 10
PLUSADEFID INTEGER 12
REASON ALN 15
SITEID UPPER 8
SOURCE ALN 15
STATUS ALN 15
PLUSADEFEXT Table
Asset Configuration Manager Database Tables and Columns 7-11
PLUSADEFEXT Table
STATUSDATE DATETIME 10
TYPE ALN 15
UNIQUEID INTEGER 15
WONUM UPPER 10
Column Type Length
ADJUST YORN 1
COMMENTS ALN 25
DURATION INTEGER 12
EXTDATE DATETIME 10
EXTENSION INTEGER 12
HASLD YORN 1
LANGCODE UPPER 4
ORGID UPPER 8
ORIGDATE DATETIME 10
PLUSADEFEXTID INTEGER 12
PLUSADEFID INTEGER 12
REASON ALN 15
SITEID UPPER 8
SOURCE ALN 15
STATUS ALN 15
STATUSDATE DATETIME 10
TYPE ALN 15
UNIQUEID INTEGER 15
PLUSALFCNTOFFSET Table
7-12 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
PLUSALFCNTOFFSET Table
PLUSALFDEFERRAL Table
Column Type Length
COUNT DECIMAL 15,2
ISON YORN 1
METERID INTEGER 12
ONOFFID INTEGER 12
ORGID UPPER 8
PLUSALFCNTOFFSETID INTEGER 12
SITEID UPPER 8
Column Type Length
DEFERREDUNITCOUNT DECIMAL 15,5
DEFERREDUNTILTIME DATETIME 10
ORGID UPPER 8
PLUSADEFERRALID INTEGER 12
PMID INTEGER 12
REBASE YORN 1
SITEID UPPER 8
TYPE ALN 25
PLUSALFEVENT Table
Asset Configuration Manager Database Tables and Columns 7-13
PLUSALFEVENT Table
PLUSALFEVTOFFSET Table
Column Type Length
ACTIVEDATE DATETIME 10
ACTIVEDATEREVIEWED YORN 1
ASSETID INTEGER 12
FORECASTCODE UPPER 20
INACTIVECODE UPPER 20
INACTIVEDATE DATETIME 10
ORGID UPPER 8
PLUSALFEVENTID INTEGER 12
PMMETERID INTEGER 12
PMUID INTEGER 12
SITEID UPPER 8
TRID INTEGER 12
WORKORDERID INTEGER 12
Column Type Length
ACTIVATEDEAVTIVATE YORN 1
COUNT DECIMAL 15,5
ORGID UPPER 8
PLUSALFEVTOFFSETID INTEGER 12
PMID INTEGER 12
SITEID UPPER 8
PLUSALFPMACTION Table
7-14 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
PLUSALFPMACTION Table
PLUSALOGENTRY Table
Column Type Length
ACTIONTYPE UPPER 20
ITEMSETID UPPER 8
PLUSALFPMACTIONID INTEGER 12
PRIMARYPMID INTEGER 12
SECONDARYPMID INTEGER 12
Column Type Length
ASSETNUM UPPER 12
CALLSIGN ALN 12
COMMENTS ALN 50
DELAYCODE ALN 8
DELAYDURATION DURATION 8
DESTINATION UPPER 16
DURATION DURATION 8
ENDDATETIME DATETIME 10
FUELQTY DECIMAL 12,2
LOGID UPPER 8
MILES DECIMAL 12,2
OPERATOR UPPER 8
ORGID UPPER 8
PASSENGERS INTEGER 12
PLUSALOGENTRYID INTEGER 12
PORIGIN UPPER 16
REPORTEDBY UPPER 30
SITEID UPPER 8
STARTDATETIME DATETIME 10
TRIPDATE DATETIME 12
TRIPNUM UPPER 8
TRIPQTY DECIMAL 12,0
PLUSALOGS Table
Asset Configuration Manager Database Tables and Columns 7-15
PLUSALOGS Table
PLUSANASSETMETER Table
TRIPUNITS UPPER 8
UNITS UPPER 8
UTILIZATION UPPER 10
Column Type Length
ASSETNUM UPPER 12
HASPROBLEM YORN 1
LOGID UPPER 8
ORGID UPPER 8
PLUSALOGSID INTEGER 12
SITEID UPPER 8
Column Type Length
ANCHORCOUNT DECIMAL 15,2
ANCHORDATE DATETIME 10
COPYTOENDITEM YORN 1
FORCECOPYTOSUBS YORN 1
METERNAME UPPER 10
NEWASSETID INTEGER 12
ORGID UPPER 8
PLUSANASSETMETERID INTEGER 12
SITEID UPPER 8
Column Type Length
PLUSANBDIMAPPING Table
7-16 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
PLUSANBDIMAPPING Table
Column Type Length
ACTIVETIME DATETIME 10
ASSETID INTEGER 12
BUILDID INTEGER 12
CATID INTEGER 12
CONFIGID INTEGER 12
CURRENTCONFIG YORN 1
INACTIVETIME DATETIME 10
ITEM UPPER 200
LABEL ALN 20
LCN ALN 60
MAP ALN 25
MODELID INTEGER 12
NAME ALN 60
NARRATIVE ALN 4000
ORGID UPPER 8
PART ALN 64
PATHID INTEGER 12
PLUSANBDIMAPPINGID INTEGER 12
PMUID INTEGER 12
POSITION ALN 20
RUNID INTEGER 12
SEQ ALN 100
SERIAL ALN 24
SITEID UPPER 8
PLUSANEWASSET Table
Asset Configuration Manager Database Tables and Columns 7-17
PLUSANEWASSET Table
Column Type Length
ASSETCREATED YORN 1
ASSETNUM UPPER 12
ASSETPREFIX UPPER 12
ASSETSTATUS ALN 20
ASSETSUFFIX UPPER 12
BUILDID INTEGER 12
CATID INTEGER 12
CONFIGID INTEGER 12
EXISTINGASSETID INTEGER 12
LOCATION UPPER 12
ORGID UPPER 8
PLUSANEWASSETID INTEGER 12
RECEIPTDATE DATETIME 10
REG UPPER 20
SERIALNUM UPPER 15
SERIALPREFIX UPPER 12
SERIALSUFFIX UPPER 12
SITEID UPPER 8
STATUS ALN 20
STATUSDATE DATE 4
PLUSANEWSUB Table
7-18 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
PLUSANEWSUB Table
PLUSANEWSUBMETER Table
Column Type Length
ASSETNUM UPPER 12
BUILDID INTEGER 12
CATID INTEGER 12
NEWASSETID INTEGER 12
ORGID UPPER 8
PARENT UPPER 12
PLUSANEWSUBID INTEGER 12
SERIALNUM UPPER 15
SITEID UPPER 8
Column Type Length
ANCHORCOUNT DECIMAL 15,2
ANCHORDATE DATETIME 10
METERNAME UPPER 10
NEWSUBID INTEGER 12
ORGID UPPER 8
PLUSANEWSUBMETERID INTEGER 12
SITEID UPPER 8
PLUSASAASSETCAT Table
Asset Configuration Manager Database Tables and Columns 7-19
PLUSASAASSETCAT Table
PLUSASAASSETSN Table
PLUSASADEFERRAL Table
Column Type Length
ASSETID INTEGER 12
CATID INTEGER 12
COMMENTSTEXT ALN 4000
ORGID UPPER 8
PERSONID UPPER 30
PLUSASAASSETCATID INTEGER 12
SITEID UPPER 8
TRANSTIME DATETIME 10
Column Type Length
ASSETID INTEGER 12
COMMENTSTEXT ALN 4000
ORGID UPPER 8
PERSONID UPPER 30
PLUSASAASSETSNID INTEGER 12
SERIAL UPPER 15
SITEID UPPER 8
TRANSTIME DATETIME 10
Column Type Length
DEFERREDUNTILTIME DATETIME 10
INSTALLID INTEGER 12
PLUSADEFERRALID INTEGER 12
TYPE ALN 25
PLUSASAEICONFIG Table
7-20 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
PLUSASAEICONFIG Table
PLUSASAEIREG Table
Column Type Length
ASSETID INTEGER 12
COMMENTSTEXT ALN 4000
CONFIGID INTEGER 12
MODELID INTEGER 12
ORGID UPPER 8
PERSONID UPPER 30
PLUSASAEICONFIGID INTEGER 12
REVISIONID INTEGER 12
SITEID UPPER 8
TRANSTIME DATETIME 10
Column Type Length
ASSETID INTEGER 12
COMMENTSTEXT ALN 4000
ORGID UPPER 8
PERSONID UPPER 30
PLUSASAEIREGID INTEGER 12
REG UPPER 20
SITEID UPPER 8
TRANSTIME DATETIME 10
PLUSASANONSERIAL Table
Asset Configuration Manager Database Tables and Columns 7-21
PLUSASANONSERIAL Table
PLUSASAONOFF Table
Column Type Length
CATID INTEGER 12
COMMENTSTEXT ALN 4000
ONOFFID INTEGER 12
ORGID UPPER 8
PERSONID UPPER 30
PLUSASANONSERIALID INTEGER 12
QUANTITY INTEGER 12
SERIAL UPPER 20
SITEID UPPER 8
TRANSTIME DATETIME 10
WORKORDERID INTEGER 12
Column Type Length
ALC UPPER 6
ASSETID INTEGER 12
LABEL UPPER 20
LCN UPPER 60
NAME ALN 40
NONSERIALIZED YORN 1
OFFTIME DATETIME 10
ONTIME DATETIME 10
ORGID UPPER 8
PARENTASSETID INTEGER 12
PLUSASAONOFFID INTEGER 12
POSITION UPPER 20
SITEID UPPER 8
PLUSASAPMACTION Table
7-22 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
PLUSASAPMACTION Table
PLUSATR Table
Column Type Length
ACTIONTYPE UPPER 20
ORGID UPPER 8
PLUSASAPMACTIONID INTEGER 12
PRIMARYPMUID INTEGER 12
SECONDARYPMUID INTEGER 12
SITEID UPPER 8
Column Type Length
EFFECTIVEDATE DATE 4
HASLD YORN 1
LANGCODE UPPER 4
NARRATIVE ALN 4000
ORGID UPPER 8
PLUSATRID INTEGER 12
PUBLICATION UPPER 40
RECISIONDATE DATE 4
REQUIRED UPPER 25
STATUS ALN 20
SUPERSEDEDBY INTEGER 12
TITLE ALN 60
TYPE UPPER 25
USERKEY1 ALN 20
USERKEY2 ALN 20
USERKEY3 ALN 20
USERKEY4 ALN 20
PLUSATRASSET Table
Asset Configuration Manager Database Tables and Columns 7-23
PLUSATRASSET Table
PLUSATRASSETSTAT Table
PLUSATRBUILD Table
Column Type Length
ASSETID INTEGER 12
MOC ALN 4000
ORGID UPPER 8
PLUSATRASSETID INTEGER 12
SITEID UPPER 8
STATUS ALN 20
TRID INTEGER 12
WORKORDERID INTEGR 12
Column Type Length
CHANGEBY UPPER 30
CHANGEDATE DATETIME 10
MEMO ALN 50
ORGID UPPER 8
PLUSATRASSETID INTEGER 12
PLUSATRASSETSTATID INTEGER 12
SITEID UPPER 8
STATUS ALN 20
Column Type Length
BUILDID INTEGER 12
CATID INTEGER 12
CONFIGID INTEGER 12
ORGID UPPER 8
PLUSATRBUILDID INTEGER 12
TRID INTEGER 12
PLUSATRBUILDITEM Table
7-24 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
PLUSATRBUILDITEM Table
PLUSATRCAT Table
Column Type Length
AUTODEFERRALDAYS INTEGER 12
BUILDITEMID INTEGER 12
INOPERATIVEDATE DATE 4
MANDATORYDATE DATE 4
OPERATIVEDATE DATE 4
ORGID UPPER 8
PLUSATRBUILDITEMID INTEGER 12
TRID INTEGER 12
VALIDUNTILREMOVED YORN 1
Column Type Length
CATID INTEGER 12
INOPERATIVEDATE DATE 4
OPERATIVEDATE DATE 4
ORGID UPPER 8
PLUSATRCATID INTEGER 12
SREXPRESSION ALN 200
SUPERSEDINGCATID INTEGER 12
TRID INTEGER 12
UPGRADE YORN 1
VALIDUNTILREMOVED YORN 1
PLUSATREVENT Table
Asset Configuration Manager Database Tables and Columns 7-25
PLUSATREVENT Table
PLUSATRMODEL Table
Column Type Length
ASSETFROMCOUNT DECIMAL 15,2
ASSETMETERID INTEGER 12
ASSETTOCOUNT DECIMAL 15,2
COMPLYBYDATE DATE 4
COUNT DECIMAL 15,2
DUEATCOUNT YORN 1
DUEATMASTERPMID INTEGER 12
EFFECTIVEDATE DATE 4
ISINITIAL YORN 1
METERID INTEGER 12
ORGID UPPER 8
PLUSATREVENTID INTEGER 12
RECURRING YORN 1
TRID INTEGER 12
Column Type Length
MODELID INTEGER 12
ORGID UPPER 8
PLUSATRMODELID INTEGER 12
SREXPRESSION ALN 200
TRID INTEGER 12
PLUSATRSTATUS Table
7-26 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
PLUSATRSTATUS Table
PM Table
PMMETER Table
Column Type Length
CHANGEBY UPPER 30
CHANGEDATE DATETIME 10
MEMO ALN 50
ORGID UPPER 8
PLUSATRID INTEGER 12
PLUSATRSTATUSID INTEGER 12
STATUS ALN 20
Column Type Length
PLUSAALERTINT DECIMAL 15,2
PLUSADUEDATEEXP ALN 4000
PLUSAEVTACTIVEDATE DATETIME 10
PLUSAINTACTION UPPER 20
PLUSASTARTDATE DATETIME 10
PLUSASTOPDATE DATETIME 10
PLUSATRID INTEGER 12
PLUSAWARNINT DECIMAL 15,2
Column Type Length
PLUSAALERTINT DECIMAL 15,2
PLUSAWARNINT DECIMAL 15,2
TICKET Table
Asset Configuration Manager Database Tables and Columns 7-27
TICKET Table
WORKORDER Table
Column Type Length
PLUSAASSETID INTEGER 12
PLUSACATID INTEGER 12
PLUSACOMPONENT ALN 12
PLUSALOGENTRYID INTEGER 12
PLUSAMAINTRECOM ALN 12
PLUSAMECHCOMMENTS ALN 50
PLUSAOPCOMMENTS ALN 50
PLUSAPOSITION ALN 24
PLUSAPROBLEM UPPER 10
PLUSASTATUS ALN 12
PLUSATRIPNUM UPPER 8
PLUSAWONUM UPPER 10
Column Type Length
PLUSAPARTFAILURE ALN 15
PLUSAREFERENCE ALN 15
PLUSAREFERENCEID ALN 15
PLUSARFR ALN 15
PLUSAWORKACCOMP ALN 15
WORKORDER Table
7-28 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
© Copyright IBM Corp. 2007 Notices-1
Notices
This information was developed for products and services offered in the U.S.A.
IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service.
IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not grant you any license to these patents. You can send license inquiries, in writing, to:
IBM Director of LicensingIBM CorporationNorth Castle DriveArmonk, NY 10504-1785U.S.A.
For license inquiries regarding double-byte (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries, in writing, to:
IBM World Trade Asia CorporationLicensing2-31 Roppongi 3-chome, Minato-kuTokyo 106-0032, Japan
The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law:
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.
Any references in this information to non-IBM Web sites are provided for convenience only and do not in any manner serve as an endorsement of those
Notices-2 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum
Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk.
IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
Licensees of this program who wish to have information about it for the purpose of enabling: (i) the exchange of information between independently created programs and other programs (including this one) and (ii) the mutual use of the information which has been exchanged, should contact:
IBM Corporation2Z4A/10111400 Burnet RoadAustin, TX 78758 U.S.A.
Such information may be available, subject to appropriate terms and conditions, including in some cases, payment of a fee.
The licensed program described in this document and all licensed material available for it are provided by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement or any equivalent agreement between us.
Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products.
All statements regarding IBM's future direction or intent are subject to change or withdrawal without notice, and represent goals and objectives only.
This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental.
If you are viewing this information softcopy, the photographs and color illustrations may not appear.
Trademarks
AIX, IBM, IBM Corporation, the IBM logo, Tivoli, and WebSphere are registered trademarks of the International Business Machines Corporation in the United States, other countries, or both.
Intel, the Intel logo, and Pentium are registered trademarks of the Intel Corporation in the United States, other countries, or both.
Microsoft, Windows, and Internet Explorer are registered trademarks of Microsoft Corporation in the United States, other countries, or both.
Notices-3
Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States, other countries, or both.
Sun, Sun Microsystems, the Sun logo, and Solaris are trademarks of Sun Microsystems, Inc.
Linux is a trademark of Linus Torvalds in the United States, other countries, or both.
UNIX is a registered trademark of The Open Group in the United States and other countries.
Other company, product, and service names may be trademarks or service marks of others.
Notices-4 IBM Maximo Asset Configuration Manager: Maximo User�s Guide Addendum