Upload
others
View
113
Download
5
Embed Size (px)
Citation preview
Hytera DMR Trunking SCADA SolutionAdd SCADA capability to your DMR systemEnrich your DMR Trunking radio system with Hytera’s powerful SCADA solution and use your system for reliable data transmission. Supporting all relevant protocols, the Hytera solution including the powerful DMR modem DTM-6000 offers everything for secure and reliable SCADA operations. Add data capability to your radio system, while still using the high-quality voice communications.
www.hytera-mobilfunk.com
Flexible & VersatileThe SCADA Solution from Hytera
Overview & ArchitectureHytera’s SCADA solution combined with the radio transmission allows SCADA and data transmission of any type of infor-mation via the narrowband Digital Mobile Radio (DMR) system – independent of the connected equipment or used SCADA software applications used on the customer’s side.
Transmitting your data via your DMR radio system instead of line connections allows to reach regions where it is too difficult or expensive to install/operate line connections. Providing standardized interfaces for connecting RTUs both via serial (RS232/RS485) or IP connections – and even the combination of both, offering support for various types of RTUs.
SCADA is the acronym of Supervisory Control and Data Acquisition and describes computer-aided systems for collecting and analyzing data in nearly real time. Based on this data, SCADA systems are also used for (automatically) controlling equipment.
Thanks to its TDMA (Time-division multiple access) channel access method, DMR radio systems are ideally suitable for using voice and data communications in parallel and using your assigned frequencies efficiently. Any traffic channel can be configured as dedicated SCADA data transmission channel according to the actual capacity needs.
Up to two RTUs can be connected via serial and/or IP connection to the SCADA Modem DTM-6000 on customer premises. Via the DMR radio system the SCADA data are transmitted to the SCADA gateway, connected to the customer’s SCADA software applications.
SCADA Control Center
DNP/IECIP
Hytera SCADA Gateway MSO Network Management System (NMS)
IP Network
Base station
Hytera SCADA Solution
Sensor
RTU
DTM-6000 DMR Data Modem
SCADA System Remote Terminal Units
Sensor
RTU
Sensor
RTU
DNP/IEC DNP/IEC DNP/IEC
DTM-6000 DMR Data Modem
DTM-6000 DMR Data Modem
Base station
HighlightsHighlights of the SCADA solution in conjunction with Hytera’s DMR Trunking radio system:
One system for voice and data
Expand your proven DMR system with SCADA and data transmission and reuse your existing investment.
Continue to use your equipment
Connect your RTUs via IP or serial (RS232, RS485) connection and prepare for your analog-to-digital tran-sition, if desired.
Hytera’s SCADA solution is compatible with all relevant industry standard protocols:
■ IEC 60870-5-101 (RS232, RS485)
■ IEC 60870-5-104 (IP)
■ DNP3
■ Modbus
Take advantage of your existing radio network, as the number of base stations can be used for your coverage.
Connect two RTUs to one DMR modem
The DTM-6000 supports connecting two RTUs in parallel, even the combination of IP or serial connected RTUs is possible.
Typical business verticals using SCADA
Keep your data private and your system available
Keep your sensitive data within your private-owned infrastructure. Achieve the required grade of availability of the communications system by implementing measures against external incidents using Uninterruptible Power Supplies (UPS).
Advanced security
Benefit from the evolved security mechanisms like
■ End-to-End encryption (E2EE)
■ Authentication
■ ESN-Check (Electronic Serial Number, ESN)
Get rid of periodic fees for data plans
Use your own and existing infrastructure for data transmission and save money by avoiding costs for data plans of public mobile network operators (MNO).
Efficient and convenient management
Get rid of cables and configure the DMR Data Modem DTM-6000 conveniently and remotely via WiFi. Firmware updates can also be performed remotely. The network management system (NMS) includes all features and functions for configuration, fault and performance management of the data modem.
Power/Energy
Manufacturing
Water and waste water Oil and Gas
Transportation Building Automation
Hytera Mobilfunk GmbHAddress: Fritz-Hahne-Straße 7, 31848 Bad Münder, Germany Tel.: + 49 (0)5042 / 998-0 Fax: + 49 (0)5042 / 998-105 email: [email protected] | www.hytera-mobilfunk.com
SGS Certificate DE11/81829313
Hytera Mobilfunk GmbH reserves the right to change the product design and specifications. Should a printing error occur, Hytera Mobilfunk GmbH assumes no liability. All specifications are subject to change without prior notice.
Encryption properties are optional and require a separate device configuration; subject to German and European export regulations.
are registered trademarks of Hytera Co. Ltd. ACCESSNET® and all derivatives are registered trademarks of Hytera Mobilfunk GmbH. © 2019 Hytera Mobilfunk GmbH. All rights reserved.
Ref. no.: 90SCAD
A_Fly_EN
G_v01
DMR Data Modem DTM-6000Powerful and flexible. For every scenario.
The DTM-6000 is a dedicated data modem, providing wide coverage data communications. The flexibly connectable RTUs allow supervising and controlling equipment like sensors, meters and Programmable Logic Controllers (PLC).
Thanks to the high output power the concerned areas can be covered, ideally just with the existing DMR base stations.
Flexible installation variants (wall-mounted, rail-mounted, flat-mounted) help to design your sites according your requirements and wishes.