Hundt Tools Catalogue · TRUMPF TruTool PN 200 Cordless Profile Nibbler 18V 4.0Ah Bosch GTC 400 C Cordless Thermo Detector 12V Specifically designed for trapezoidal sheets up to a

Tools Catalogue

Dear Hundt customer,

Wilhelm Hundt GmbH is a family-owned company located in Wuppertal (Germany) which dealswith tools and equipment for over 50 years. We specialize in supplying the needs of thermal andnoise insulation fitters, roofing contractors, facade builders, tinsmiths, plumbers, ventilation fittersand craftsmen in interior finishing.

Drawing from our many years of experience, we produce and service insulation machinery. Whetheryou need sheet metal to be punched, folded, cut or rounded, we can provide you with the rightmachine and the matching tool for the job.

This catalogue is an excerpt from our product range of tools and construction site equipment.

Please take note of our comprehensive range consisting of:

Insulation machinery + accessories + spare parts (also used machines and for rent) Construction Site Equipment Hand Tools + Spare Parts Power Tools + Accessories + Spare Parts Cable Reels + Extensions + Work Lights Self-tapping Screws + Rivets Toggle Latches + Band Clamps

We highly recommend you to visit our online shop www.hundt-direkt.de where you will find acurrent selection of about 10,000 items. The range of products is constantly updated and extended.While visiting the online shop, check out the latest news from our manufacturers and our special of-fers.

In the HUNDT online shop you can safely and easily order everything you need and as a registeredcustomer – as is common practice today – manage your own account.

We hope that our catalogue and our website will find your interest and we look forward to hearingfrom you soon,

YoursWilhelm Hundt GmbH

4

More products: www.hundt-direkt.de Your request: [email protected]

New Products

TRUMPF TruTool PN 200 Cordless Profile Nibbler18V 4.0Ah

Bosch GTC 400 C Cordless Thermo Detector 12V

Specifically designed for trapezoidal sheets up to a profiledepth of 85 mm and C-L-U profiles, machine can be turnedon the spot by 360°, cutting direction, punch and tool car-rier can be changed quickly, without the need for tools.Standard accessories: 2 batteries 4.0Ah, charger 100-240V, tool PN 200, punch, die, punch guide, wearing plate,TRUMPF Box.

Visualise temperature differences within seconds and docu-ment results with ease, easy location orientation of themeasured values due to the built-in camera which genera-tes a visible image with an overlay of the thermal image,easy documentation and fast exchange of data using theBosch Measuring Master app. Standard accessories: 1 battery 12V 1.5 Ah, charger GAL1230 CV, hand strap, L-Boxx.

Max. sheet thickness (steel 400N/mm²) 2.0 mmMax. sheet thickness (steel 600N/mm²) 1.5 mmMax. sheet thickness (alu 250N/mm²) 3.0 mmWorking speed 1.6 m/minMin. start hole Ø 24 mmSmallest radius 50 mmBattery voltage/capacity 18 V / 4.0 AhStroke rate 1200 min-1

Weight 2.3 kgItem No. 352010

Measurement range -10 °C to +400 °CMeasuring accuracy of IR ±3.0 °CSize of TFT display 3.5 "Frame buffer (number of images) 500 (visual and thermal)Thermal sensitivity (NETD) <50 mKData transfer MicroUSB, WLANBattery voltage/capacity 12V / 1.5AhDust and splash protection IP 53Weight 0.54 kgItem No. 340234

Solo (without batteries and charger) 352020

http://www.hundt-direkt.de

mailto:[email protected]


5


New Products

VVG Cordless Riveting Tool RivSmart 12V 2.0AhThe lightest cordless riveter in the world with networked pro-cess monitoring and control (i.a. via app). Working range:blind rivets up to 5 mm Ø of all materials (aluminium, steel,stainless steel, copper); powerful, brushless motor; perfectedclamping mechanism, new trigger with extremely short travelenables fast and comfortable work, optional automatic ormanual return. Standard accessoires: charger, battery 12V2.0Ah, 4 nosepieces, mounting wrench, L-Boxx.

Makita DA333DY1J Cordless Angle Drill 10.8VHandy: only 84 mm from top edge of gear head to drillchuck point, motor brake, bright LED with after glowfunction. Standard accessoires: 1 × battery 10.8V 1.5Ah,MAKPAC

No-load speed 0-1100 min-1

Drilling Ø wood 12 mmDrilling Ø steel 10 mmDrill chuck clamping width 0.8 - 10 mmBattery voltage 10.8VItem No. 300464

1×2.0 Ah 21 mm

Battery Stroke1.8 kg

Weight10000N 500411

2×2.0 Ah 21 mm 1.8 kg 10000N 500409

Traction power Item No.






6


Please visit our online shop and our Facebook page at regular intervals.Here you will find our special offers and new products - constantly up to date!

New Products

Schöler+Bolte Stud Welding Unit ISOFIX accu

Specially designed for welding cupped head pins and in-sulation nails, the battery operation enables mobile usewithout electrical power supply, extremely short chargingtimes and quick welding sequences due to electronicallyclocked inverter charging board, all functions indicated byclearly arranged LED, continuously adjustable charging vol-tage. Standard accessoires: 1 battery, charger, stud welding gunPIM-1B, ground cable 25 mm² 5 m, grip pliers, magneticstud holder TSM311 for cupped head pins (Ø 30 mm).

Welding material steel, stainless steel, aluminiumWelding range Ø 2-3 mm

Welding sequence > 20 welds / min

damage on welding/control cableBattery capacity up to 1500 welds (80V)

Dimensions (W × L × H) 195 x 302 x 270 mmWeight 9 kgItem-No. 380304

Charging time ca. 3 hours

Hundt Slimline Mobile Chip-LED spotlight 50 WSpecially developed ORIGINAL SAMSUNG SMD LED.Reinforced die-cast aluminium case, stable frame, replaca-ble safety glass with robust safety guard, IP 44 for in- andoutdoor use, with 3m rubber cable H07RN-F 3G1.5, tested according to DIN EN60598-1, 2 sockets 230V/16A

Error diagnosis systems excess temperature

Power C. temp. Brightness Beam angle Cable Item no..50 W 4000 K 4250 Lumen 120 ° 3 m 230141

hundt-direkt.de

hundt.de category “Publikationen”

facebook.com/WilhelmHundtGmbH

de.linkedin.com/company/wilhelm-hundt-gmbh

https://de.linkedin.com/company/wilhelm-hundt-gmbh

https://www.facebook.com/WilhelmHundtGmbH

http://www.hundt.de/index.php?id=publikationen





7


New Products..................................................................................... 4

1 Hand Tools..................................................................................... 8

2 Riveting Tools............................................................................... 61

3 Power and Cordless Tools................................................................. 69

4 Accessoires Power and Cordless Tools................................................ 115

5 Welding Equipment..........................................................................135

6 Power Distribution / Lighting............................................................. 138

7 Construction Site Equipment.............................................................. 146

8 Occupational Safety........................................................................ 155

Online-Shop Ordering......................................................................... 160

Terms and Conditions.......................................................................... 161

Alphabetical Index.............................................................................. 162

Table of Contents






8

Hand Tools1


Hundt Insulation Tool-Set, 24 piecesConsisting of:Tool case 5-piece (reinforced version), brass padlock 40 mm,Erdi shape and straight cutting snips (blue) 216/260 right,Erdi shape and straight cutting snips (blue) 216/260 left,Erdi pelican snips 218/350, insulation shear 250 mm,hand hole punch (size 20), one-hand tensioner, PUK saw,grip pliers 250 mm, tower pincer 250 mm, hand riveter HZ,clinching pliers 60 mm (45° bent), outside caliper 300 mm,locksmith's hammer 300 g, precision steel square 300 mm,wing divider 300 mm, screwdriver 150 × 8 mm with woodenhandle, insulation knife 150 mm (form B), wooden folding rule2 m incl. perimeter scale, scriber 3.5 × 40 mm, combinationpliers 200 mm, scratch/marking template, permanent marker.

Size530×200×200mm

Weight14 kg

Item No.400002

Hundt Insulation Tool-Set PLUS, 27 piecesConsisting of:Tool case 5-piece (reinforced version), brass padlock 40 mm,Erdi shape and straight cutting snips (blue) 216/260 right,Erdi shape and straight cutting snips (blue) 216/260 left,Erdi pelican snips 218/350, insulation shear 250 mm,hand hole punch (size 20), one-hand tensioner, PUK saw,grip pliers 250 mm, tower pincer 250 mm, hand riveter HZ,clinching pliers 60 mm (45° bent), outside caliper 300 mm,locksmith's hammer 300 g, precision steel square 300 mm,wing divider 300 mm, screwdriver 150 × 8 mm with woodenhandle, insulation knife 150 mm (form B), wooden folding rule2 m incl. perimeter scale, scriber 3.5 × 40 mm, combinationpliers 200 mm, scratch/marking template, permanent marker.

+ Makita DF331 Battery Drill/Driver 10.8V incl. case,charger, 2 batteries 4.0Ah, socket bit AF7 with ball lockingdevice, socket bit AF8 with ball locking device

Size530×200×200mm

Weight19 kg

Item No.400003



9

Hand Tools 1


Erdi Shape and Straight Cutting SnipsFor continuous, straight and curved cuts,available in right or left cutting versions.

116-260 260 mm green steel 1.2 mm ST37 400030116-260L 260 mm green steel 1.2 mm ST37 400031116-280 280 mm green steel 1.2 mm ST37 400215116-280L 280 mm green steel 1.2 mm ST37 400216216-260 260 mm blue HQ steel 1.2 mm ST37 400110216-260L 260 mm blue HQ steel 1.2 mm ST37 400111216-280 280 mm blue HQ steel 1.2 mm ST37 400112216-280L 280 mm blue HQ steel 1.2 mm ST37 400113416-280 280 mm violet HSS 1.2 mm ST37 400129416-280L 280 mm violet HSS 1.2 mm ST37 400142

Type Length Colour Quality Sheet thickness Item No.

Erdi Pelican SnipsFor long, straight and continuous cutting, available in right or leftcutting versions (in 300 mm dimension also available as left cutter).

118-300 300 mm green steel 1.2 mm ST37 400014118-300L 300 mm green steel 1.2 mm ST37 400015118-350 350 mm green steel 1.2 mm ST37 400016218-300 300 mm blue HQ steel 1.2 mm ST37 400143218-350 350 mm blue HQ steel 1.2 mm ST37 400144418-300 300 mm violet HSS 1.2 mm ST37 400147418-350 350 mm violet HSS 1.2 mm ST37 400148


Erdi Shape Cutting Punch SnipsFor short, straight and curved cuts (especially small radii),available in right or left cutting versions.

114-250 250 mm green steel 1.2 mm ST37 400010114-250L 250 mm green steel 1.2 mm ST37 400011214-250 250 mm blue HQ steel 1.2 mm ST37 400159214-250L 250 mm blue HQ steel 1.2 mm ST37 400162


Erdi Punch SnipsFor short, straight and curved cuts,available in right or left cutting versions.

107-250 250 mm green steel 1.2 mm ST37 400006107-250L 250 mm green steel 1.2 mm ST37 400007107-300 300 mm green steel 1.2 mm ST37 400008107-300L 300 mm green steel 1.2 mm ST37 400009207-250 250 mm blue HQ steel 1.2 mm ST37 400175207-250L 250 mm blue HQ steel 1.2 mm ST37 400176207-275 275 mm blue HQ steel 1.2 mm ST37 400177207-275L 275 mm blue HQ steel 1.2 mm ST37 400178207-300 300 mm blue HQ steel 1.2 mm ST37 400179207-300L 300 mm blue HQ steel 1.2 mm ST37 400194407-275 275 mm violet HSS 1.2 mm ST37 400203407-275L 275 mm violet HSS 1.2 mm ST37 400204407-300 300 mm violet HSS 1.2 mm ST37 400205407-300L 300 mm violet HSS 1.2 mm ST37 400206






10

Hand Tools1


Erdi Shape and Straight Cutting Snips D17A / ASSFor continuous, straight and curved cuts; compound leverage, edgeswith micro-serrations for slipproof working, exceptionally robust, available in right or left cutting versions.

17A 240 mm blue HQ steel 2.0 mm ST37 40013417AL 240 mm blue HQ steel 2.0 mm ST37 40013517ASS 240 mm red SHQ steel 2.0 mm ST37 40013617ASSL 240 mm red SHQ steel 2.0 mm ST37 400137


208-275 275 mm blue HQ steel 1.2 mm ST37 400208208-275L 275 mm blue HQ steel 1.2 mm ST37 400209


Erdi Punch Snips with curved blades D208Especially for circular cuts, semi-circular edges,available in right or left cutting versions.

Erdi Shape and Straight Cutting Snips D15A For long continuous, straight and curved cuts; small and manoeuvrable,compound leverage, available in right or left cutting versions.

Erdi Shape and Straight Cutting Snips D08For continuous, straight and curved cuts; compound leverage, manoeuvrable, edges with micro-serrations for slipproof working,special flat cutter head enables cutting in narrowest radius, availablein right or left cutting versions.

08 230 mm blue HQ steel 1.5 mm ST37 40013008L 230 mm blue HQ steel 1.5 mm ST37 400131


15A 180 mm red SHQ steel 1.5 mm ST37 40003715AL 180 mm red SHQ steel 1.5 mm ST37 400014


Erdi Shape and Straight Cutting Snips 216-280-B-SBSKwithout opening stopFor continuous, straight and curved cuts, with no opening stop andwith extra pointed cutter head, edges with micro‐serrations forslip‐proof working, snips completely tempered and burnished, cutterinductively hardened.

216-280 280 mm green HQ steel 1.0 mm ST37 400172216-280L 280 mm red HQ steel 1.0 mm ST37 400163




11

Hand Tools 1


Erdi Shape and Straight Cutting Snips D39ASSFor continuous, straight and curved cuts; extremely compact cutterhead with a partially countersunk head screw connection for increasedmanoeuvrability and precision for curved cuts; joint area screwedconnection with stud bolt, sintered disc and maintenance-free springfor extreme robustness; reduced handle opening angle for optimisedhandling and an even cutting length; central latch for easy operationwithout having to change your grip; right or left cutting versions.

Erdi Shape and Straight Cutting Snips D29ASS-2For continuous, straight and shaped cuts; compound leverage,compact cutter head, available in right or left cutting versions.

Erdi Shape and Straight Cutting Snips D27A / AHFor long continuous, straight and curved cuts; compound leverage,edges with micro-serrations for slipproof working, available in rightor left cutting versions.

27A 260 mm blue HQ steel 1.5 mm ST37 40013827AL 260 mm blue HQ steel 1.5 mm ST37 40013927AH 260 mm violet HSS 1.5 mm ST37 40015327AHL 260 mm violet HSS 1.5 mm ST37 400154


27AH-TiN 260 mm violet HSS-TiN 1.5 mm ST37 40014927AHL-TiN 260 mm violet HSS-TiN 1.5 mm ST37 400152


29ASS-2 260 mm red SHQ steel 1.5 mm ST37 40010029ASSL-2 260 mm red SHQ steel 1.5 mm ST37 400101


Erdi Shape and Straight Cutting Snips HSS D27AH-TiN For continuous, straight and curved cuts; compound leverage, case-hardened HSS edges, TiN coated cutter head for longer service life -even in case of hard materials, available in right or left cutting versions.

39ASS 230 mm red SHQ steel 1.5 mm ST37 40016739ASSL 230 mm red SHQ steel 1.5 mm ST37 400174


Erdi Aviation Snips D16For short, straight and curved cuts; compound leverage, edges withmicro-serrations for prevent slipping, available in right or left cuttingversions.

16 240 mm green HQ steel 1.2 mm ST37 40015616L 240 mm red HQ steel 1.2 mm ST37 40015716S links 240 mm yellow HQ steel 1.2 mm ST37 400158






12

Hand Tools1


Wiss Shape Cutting Snips

M1R 245 mm red (l) molybdenum 1.5 mm ST37 400180M2R 245 mm green (r) molybdenum 1.5 mm ST37 400181


From tight curves to straight cuts, compound leverage, available in rightor left cutting versions.

Erdi Shape Cutting Snips D29SS-2For short, straight and shaped cuts; compound leverage, edges withmicro-serrations for slipproof working, available in right or left cuttingversions.

Erdi Straight Cutting Snips D29BSS-2For continuous and straight cuts, compound leverage, edges withmicro-serrrations for slipproof working, available in right or left cuttingversions.

Erdi Aviation Snips Set DSET16For short, straight and curved cuts; compound leverage, edges withmicro-serrations for prevent slipping.

DSET16 1 × D16, 1 × D16L and 1 × D16S 400213in roll-up case

Type Equipment Item No.

Wiss Shape Cutting SnipsCompound leverage, slight curves and straight cuts

M3R 245 mm yellow molybdenum 1.5 mm ST37 400185


29SS-2 260 mm red SHQ steel 1.5 mm ST37 40010429SSL-2 260 mm red SHQ steel 1.5 mm ST37 400106


29BSS-2 260 mm red SHQ steel 1.5 mm ST37 40010729BSSL-2 260 mm red SHQ steel 1.5 mm ST37 400109




13

Hand Tools 1


Wiss Straight Cutting SnipsFrom tight curves to straight cuts, compound leverage, available in rightor left cutting versions.



Wiss Offset Vertical SnipsIdeal for increased reach in overhead projects or ground-level cutting,compound leverage, available in right or left cutting versions.

STUBAI Straight Cutting SnipsFor long and straight cuts, lacquered grips.

350 mm 1050 g 0.8 mm ST37 400025

Length Weight Sheet thickness Item No.



Wiss Special Series SnipsJaws specially hardened to cut metals such as stainless steel, inconel,and titanium; compound leverage, available in right or left cuttingversions.

M1RS1 245 mm blue (l) molybdenum 1.5 mm ST37 400182M2RS1 245 mm blue (r) molybdenum 1.5 mm ST37 400183


STUBAI Pelican Pattern Snips, PVCFor long and straight cuts, PVC-coated grips

350 mm 1050 g 0.8 mm ST37 400026

Length Weight Sheet thickness Item No.





14

Hand Tools1


STUBAI Curved Tin SnipsSpecial tin snips for straight and curved cuts, available in right or leftcutting versions.

250 mm 42 mm 0.8 mm ST37 400021 (r)250 mm 42 mm 0.8 mm ST37 400022 (l)300 mm 47 mm 0.8 mm ST37 400023 (r)300 mm 47 mm 0.8 mm ST37 400024 (l)

Length Cut length Sheet thickness Item No.

GRATTEC Double Deburrer DB2000GTSimultaneously removes burrs from both sides of sheet metal.Standard accessories: plastic handle with hand guard, 2 HSS cuttingblades GT-N80.

0 - 12 mm 410021

Sheet thickness Item No.

STUBAI Combination Tin Snips, PVCFor continuous, straight and curved cuts; available in right or left cuttingversions, PVC-coated grips.

280 mm 34 mm 0.8 mm ST37 400218 (r)280 mm 34 mm 0.8 mm ST37 400219 (l)


STUBAI Combination Tin SnipsFor continuous, straight and curved cuts; available in right or left cuttingversions, lacquered grips.

280 mm 34 mm 0.8 mm ST37 400019 (r)280 mm 34 mm 0.8 mm ST37 400020 (l)


90 55 280 mm 460 g 1.2 mm ST37 410523

Type Length Weight Sheet thickness Item No.

Knipex Sheet Metal Nibbler 90 55 280 For cutting iron, copper or aluminium sheet metal up to max. 1.2 mmthickness and plastic up to max. 2.0 mm thickness, clean cut edges -no trimming activities needed, materials are cut without deformation,with chip breaker, easy handling, tool body: special tool steel, rolled,oil-hardened; blades: special tool steel, oil-hardened, interchangeable;cutting width: 2.7 mm



15

Hand Tools 1


Hundt Marking Template

Hundt Marking Template, hardened

Hundt Scriber with Wooden Handle, red

Made of stainless steel, robust; simple, quick and precise handlingscale from 5 to 100 mm, increasing in 5 mm, for gutter bead of 15mm in 45° angle, can be used for deburring.

Made of hardened stainless steel, scale from 5 to 100 mm, increasingin 5 mm, hardened to 48 HRC, bend-resistant, essentially higher life ofedges.

With round-point and red handle made of hardwood, continiousblade, length 95 mm with striker plate, blade made of chrome-vanadium steel, long polished section.

0.9 mm 60 g 5 - 100 mm 420450

Thickness Weight Scale Item No.

0.7 mm 60 g 5 - 100 mm 420451

Thickness Weight Scale Item No.

3.5 × 40 mm 420403

Blade Item No.

Hundt Scriber with Wooden Handle, brownWith round-point and brown handle made of hardwood, continiousblade, length 95 mm with striker plate, blade made of chrome-vanadium steel, long polished section.

6 × 95 mm 420404

Blade Item No.

Hundt Scriber with Wooden Handle, ProfessionalBlade made of high-alloyed chrome-vanadium steel, handle made ofsealed beechwood with striking sleeve, protected at the handle end.

4 × 50 mm 420401

Blade Item No.





16

Hand Tools1


Hundt Scriber with Plastic HandleWith round-point and handle made of special plastic, blade made ofchrome-vanadium steel, brightly polished.

6 × 80 mm 4204066 × 100 mm 420405

Blade Item No.

Hundt Scriber with Carbide Metal TipHexagonal shaft, in pocket.

6 × 155 mm 420460

Blade Item No.

Hundt Scriber, straight TipHardened, mandrel length: 90 mm, removable, with thread, nurledand black finished shaft.

8.5 × 175 mm 420419

Blade Item No.

Hundt Scriber, straight and bent TipHardened, straight mandrel length: 100 mm, bent mandrellength: 75 mm, removable, with thread, knurled and black finishedshaft.

8 × 250 mm 420420

Blade Item No.

Hundt DividerWith screw hinge, DIN1 6486, fine polished.

1 DIN German Institute for Standardization

150 mm 420005

Length Item No.400 mm 420009

200 mm 420006 500 mm 420010250 mm 420007 600 mm 420011300 mm 420008 800 mm 420012

Length Item No.



17

Hand Tools 1


Hundt Wing Divider

Hundt Outside Caliper

Hundt Inside Caliper

With screw hinge and setting wing, DIN1 6486, fine polished.

With rivet hinge, DIN1 6484, fine polished.

With rivet hinge, DIN1 6482, fine polished.

150 mm 420030


200 mm 420031 500 mm 420035250 mm 420032 600 mm 420036300 mm 420033 800 mm 420038

Length Item No.

150 mm 420050


200 mm 420051 500 mm 420055250 mm 420052 600 mm 420056300 mm 420053 800 mm 420058

Length Item No.

150 mm 420083


200 mm 420084 400 mm 420087250 mm 420085 500 mm 420088

Length Item No.

Hundt Wing Divider with interchangeable PointsWith screw hinge and setting wing, DIN1 6486,with interchangeable hard metal points.

Hundt Wing Divider with Pencil Holder With rivet hinge and setting wing, DIN1 6484,with adjusting bow and pencil holder, fine polished.

200 mm 420041


250 mm 420042300 mm 420043

500 mm 420089

250 mm 420092 500 mm 420094

Length Item No.

150 mm 420090


200 mm 420091 400 mm 420093

Length Item No.





18

Hand Tools1


Dries in seconds, lightfast, weatherproof, locked tip, colour-intensive,low-odour, xylene- and toluene-free ink, excellent smudge-proof andwaterproof qualities on almost all surfaces, with bullet nib (ca. 2 mm),DRY SAFE – can be left uncapped for days without drying up(standard atmosphere according to ISO 554).

Hundt Permanent Marker

Edding® Permanent Marker 3000Low-odour and waterproof ink, dries quickly, resistant to abrasion,immediately useable, bullet nib, stroke width: approx. 1.5 – 3 mm, for materials with any surface - from slightly absorbent box lids tosmooth plastic and glass containers.

red 280020green 280030blue 280040

Colour Item No.

black 280010

Colour Item No.

Hundt Marking Gauge with circular RodWith fine adjustment, reading 1/10 mm.

200 mm 420190


Length Item No.

Hundt Steel Beam Trammels, circularWith round rod, interchangeable points, reading 1/10 mm,with fine adjustment.

500 mm 420060


1000 mm 420061 2000 mm 420063

Length Item No.

Hundt Steel Beam Trammels, flatWith flat rod, interchangeable points, reading 1/20 mm,with fine adjustment.

500 mm 420070


1000 mm 420071 2000 mm 420073

Length Item No.




19

Hand Tools 1


Hundt Insulators TemplateTemplate for isometric representations in ventilation and insulating fields

249×144×1 mm 281000

Dimensions Item No.


Hundt Steel ProtractorWith fixing screw, range 0-180°, anti-glare satin-chrome finished,laser graduation.

150×270 mm 420079 300×600 mm 420082

80×165 mm 420077

Dimensions Item No.200×400 mm 420080

120×225 mm 420078 250×500 mm 420081

Dimensions Item No.

Hundt Precision Steel Square

Hundt Precision Steel Square, flat

Hundt Carpenters' Steel Square

For scribing and alignment of right angles, T-profile = excellent stability,bright zinc-plated surface = optimal rust protection

For scribing and alignment of right angles,bright zinc-plated surface = optimal rust protection.

Zinc-plated version.

200×130 mm 420102


300×200 mm 420103 750×400 mm 420108400×200 mm 420104 1000×500 mm 420110500×250 mm 420105

Dimensions Item No.

300×180 mm 420123


500×280 mm 420125 1000×500 mm 420130600×330 mm 420126

Dimensions Item No.

600×35×1.5mm 420136

Dimensions Item No.

800×35×1.5mm 4201381000×35×1.5mm 420140





20

Hand Tools1


Hundt Flexible Steel RuleMade of stainless steel.

300×13×0.5mm 420143

Dimensions Item No.

500×18×0.5mm 4201451000×18×0.5mm 420150

Hundt Steel Rule without Bevel Bright zinc-plated.

400×40×5 mm 420163

Dimensions Item No.

500×40×5 mm 4201651000×40×5 mm 420166

1500×40×5 mm 420167

Dimensions Item No.

2000×40×5 mm 420168

Hundt Folding RuleWhite, robust version.

Hundt Steel Rule with Bevel and GraduationBright zinc-plated.

400×40×5 mm 420183

Dimensions Item No.

500×40×5 mm 4201851000×40×5 mm 420186

1500×40×5 mm 420187

Dimensions Item No.

2000×40×5 mm 420188

wood 2 m yes 420202wood 2 m yes yes 420212plastics 2 m yes 420215

Material Length mm-scale Perimeter scale Item No.

1 m 420064

Length Item No.

2 m 420065

Hundt Folding Rule, light metalWith brass spring and millimeter gradations on both sides.



21

Hand Tools 1


Hundt Pocket Tape RuleSimple version.

5 m 420243

2 m 420241

Length Item No.

3 m 420242

Hundt Glas Fibre Tape RuleSheet steel case, PVC-coated, centimeter graduation on both sides15 mm width, EU standard.

10 m 420251

Length Item No.25 m 420254

20 m 420253 30 m 420255

Length Item No.

STANLEY Tape Rule PLA

STANLEY Tape Rule Panoramic

With a narrow, elegant design; blade painted for long service life,printed in two colors, black plastic case, imitation leather with metalring, automatic blade reverse without brake, accuracy class II.

Aluminium heel, 2-rivet sliding hook for measuring in stop and catchmode, direct reading of internal measurements under the upper indica-tor, ABS anti-shock case, accuracy class II.

STANLEY Tape Rule PowerLock® (metal case)Chrome high-impact ABS case, blade lock and automatic bladereverse, belt clip, anti-abrasion Mylar® coating extends life of entireblade, accuracy class II.

3 m/12.7 mm 470043

Length/Width Item No.

3 m/6.35 mm 470064


3 m/12.7 mm 420247






22

Hand Tools1


STABILA Pocket Tape Rule BM 20Unbreakable plastic case, adjustable end hook, automatic bladereverse, stopper for braking and locking the blade.


STABILA Pocket Tape Rule BM 30 WCurved, polyamide-coated yellow steel blade with cm- and mm-gradu-ation, red tens, adjustable end hook, patented spikes hook, automaticblade reverse, stopper for braking and locking the blade, buffer onblade inlet, unbreakable plastic case with window for viewing internalmeasurements, belt clip.

3 m/16 mm 420047


Hundt TALMETERInternal and external measurement using etching function,diameter measurement with scale on the reverse side of the tape,calliper function to mark out round shapes.

2 m 4202033 m 420204

Length Item No.

STABILA Spirit Level, standard Standard version, yellow, for locking of horizontal and perpendicularareas, illustration similar!

80 cm 420308 200 cm 420320100 cm 420310

40 cm 420309

Length Item No.120 cm 420312

60 cm 420306 150 cm 420315

Length Item No.

STABILA Spirit Level, magneticFor locking of horizontal and perpendicular areas, 2 imprintedmeasurement scales, with rare-earth magnets with additionally strongadhesive force, light metal alloying, electrostatic yellow powdercoating, level made of acryl.

100 cm 420026 200 cm 420037

60 cm 420024

Length Item No.120 cm 420027

80 cm 420025 180 cm 420029

Length Item No.

2 m/13 mm 420101

5 m/19 mm 4200573 m/13 mm 420048



23

Hand Tools 1


Hundt One-Hand Tensioner HSPFor insulation works, for tensioning of insulations of steel strip,long-lasting high quality, in-house production, handles andtransportation wheel made of high-strength and hardened special steel,clamping lever made of high-strength machine casting.

10-19mm 460130

Steel strip/Width Item No.

Hundt One-Hand Tensioner CCQuality one-hand tensioner for insulation works, for tensioning ofinsulations of steel strip of 10-19 mm width.

10-19mm 460100

Steel strip/Width Item No.

Hundt Spindle Tensioner Drop forged bending tool with built-in cut-off assembly for tensioningof insulations of stainless steel strip of 10-19 mm width, essential partsare heat-treated.

10-19mm 460150

Steel strip Item No.

Hundt Tank and Boiler Tensioner

Hundt Lashing Strap

For heavy insulation works.

With ratchet EN 12195/2, LC1000/2000 daN,strap width: 50 mm, strap color: orange

up to 25 × 1 mm 460200

Steel strip Item No.

5 m 46001010 m 46001115 m 46001220 m 460013

Length Item No.





24

Hand Tools1


Hundt Hand Hole Punch, size 20 Low-weight version, for one-hand use, punches rivet holes up to 6 mm,replaceable stamps. Standard accessoires: 3.3 mm punch and die plate.

20 30 mm 6 mm 1 mm 235 mm 900 g 440100

Hundt Hand Hole Punch, size 24Low-weight version, for one-hand use, punches rivet holes up to 6 mm,replaceable stamps. Standard accessoires: 3.3mm punch and die plate.

Punch for Hundt Hand Hole Punch, size 20 6 × 25 mm

2.0 mm 4401203.0 mm 4401303.1 mm 4401313.2 mm 4401323.3 mm 4401333.5 mm 440135

Hole Ø Item No.3.7 mm 4401373.8 mm 4401383.9 mm 4401394.0 mm 4401404.1 mm 440141


Hole Ø Item No.

Punch for Hundt Hand Hole Punch, size 246 × 30 mm

12 × 15 mm

2.8 mm 4403283.0 mm 4403303.2 mm 4403323.3 mm 4403333.4 mm 4403343.5 mm 440335

Hole Ø Item No.3.6 mm 4403363.7 mm 4403373.8 mm 4403384.0 mm 4403404.1 mm 4403414.2 mm 440342


Hole Ø Item No.

2.0 mm 4404202.8 mm 4404283.0 mm 4404303.1 mm 4404313.2 mm 4404323.3 mm 440433

Hole Ø Item No.3.5 mm 4404353.7 mm 4404373.8 mm 4404384.0 mm 4404404.1 mm 4404414.2 mm 440442


Hole Ø Item No.

Die Plate for Hundt Hand Hole Punch, size 20 and 24

Size Working depth Hole Ø up to ST37 up to Length Weight Item No.

24 60 mm 6 mm 1.75 mm 360 mm 1700 g 440300

Size Working depth Hole Ø up to ST37 up to Length Weight Item No.



25

Hand Tools 1


Small Punchfor Hand Lever Punching Machine 21/8Replacement punch 3.0 up to 10.0 mm

Hundt Hand Lever Punching Machine 21/8Rigid steel frame, toothed lever transmission, play-free slide guidance,hand lever secured by torsion spring, can be equipped with oversizepunching attachment up to 45mm Ø, punching attachment exchange-able, round punch with die Ø 8 mm, punches holes up to Ø 10 in6.3 mm or Ø 18 in 3.5 mm sheet metal.

90 mm 80 kN

Throat depth Capacity18.5 kg 298101

Weight approx. Item No.

3.0 mm 2981193.5 mm 2981094.0 mm 2981104.5 mm 2981115.0 mm 298108


Hole Ø Item No.8.0 mm 2981248.5 mm 2981259.0 mm 2981269.5 mm 298127

10.0 mm 298106

Hole Ø Item No.

Large Punchfor Hand Lever Punching Machine 21/8Replacement punch 11.0 up to 18.0 mm

11.0 mm 29812812.0 mm 29811813.0 mm 298129

Hole Ø Item No.14.0 mm 29813015.0 mm 29813116.0 mm 298132

Hole Ø Item No.17.0 mm 29813318.0 mm 298134

Hole Ø Item No.

Small Die Platefor Hand Lever Punching Machine 21/8Replacement die plate 3.2 up to 10.2 mm

Large Die Platefor Hand Lever Punching Machine 21/8Replacement die plate 11.2 up to 18.2 mm

3.2 mm 2981353.7 mm 2981134.2 mm 2981144.7 mm 2981155.2 mm 298116


Hole Ø Item No.8.2 mm 2981408.7 mm 2981419.2 mm 2981429.7 mm 298143

10.2 mm 298144

Hole Ø Item No.

11.2 mm 29814612.2 mm 29814813.2 mm 298150

Hole Ø Item No.14.2 mm 29815115.2 mm 29815216.2 mm 298153

Hole Ø Item No.17.2 mm 29815418.2 mm 298155

Hole Ø Item No.





26

Hand Tools1


Hundt Hand Setting Pliers, Type 200Pliers for setting bead holding clips Type M.

Hundt Bead Holding Clip, Type MOperated with pliers, for provisional fastening of metal sheetconstructions, e.g. for sticking of bow segments in beading.

3.2 - 3.5 mm 460510

Hole Ø Item No.

Hundt Bead holding clip, Type MOHand-operated, for provisional fastening of metal sheetconstructions, e.g. for sticking of bow segments in beading.

3.2 - 3.5 mm 460530

Hole Ø Item No.

Hundt Bead HookFor provisional fastening of metal sheet constructions, e.g. for stickingof bow segments in beading.

3.2 - 4.5 mm 460400

Hole Ø Item No.

200 mm 460520

Length Item No.



27

Hand Tools 1


Erdi Mini Folding Pliers, straightFor small and precise seaming- and bending operations, forged ofquality steel, PVC-coated handles, completely hardened.

22 mm 220 g

Jaw width Weight180 mm 410047

Length Item No.

Erdi Mini Folding Pliers, 45° bentFor small and precise seaming- and bending operations, forged ofquality steel, PVC-coated handles, completely hardened.

22 mm 220 g


Length Item No.

Forged of chrome-vanadium steel, non-twistable.

Erdi Clinching Pliers, straight

40 mm 41003060 mm 41003180 mm 410032

Jaw width Item No.

Erdi Clinching Pliers, 45° bentForged of chrome-vanadium steel, non-twistable.

40 mm 41003560 mm 41003680 mm 410037

Jaw width Item No.

Hundt Clinching Pliers, 90° bentForged of chrome-vanadium steel, non-twistable.

40 mm 41004160 mm 41004280 mm 410043

Jaw width Item No.





28

Hand Tools1


Hundt Tinsmith' Flat Nose Pliers, straightForged of chrome-vanadium steel, non-twistable, handles PVC-coated.

240 mm 360 g 410033

Length Weight Item No.

Hundt Tinsmith' Flat Nose Pliers, 40° bentForged of chrome-vanadium steel, non-twistable, handles PVC-coated.

240 mm 360 g 410034


Non-twistable, forged of chrome-vanadium steel, due to the straightand asymetric form it is possible to clinch in smallest corners.

Hundt Corner Clinching Pliers 60

60 mm 680 g


Length Item No.

Hundt Seaming Pliers, straightNon-twistable

100 mm 2300 g


120 mm 2600 g 150 mm 410050140 mm 2800 g 150 mm 410052160 mm 2900 g 150 mm 410054180 mm 3200 g 150 mm 410056200 mm 3300 g 150 mm 410058

Jaw width Item No.

Hundt Seam Opening PliersRobust, special formed and blank polished head, upper jaw withcutting edge, bottom jaw with prism, for quick opening of standing-and double seams, PVC-coated handles.

35 mm 450 g


Length Item No.



29

Hand Tools 1


Hundt Pipe Crimper 30For fastening of metal pipes up to max. 1.0 mm thickness, lightweightand handy, opening automatically, handles PVC-coated.

240 mm 500 g 1 mm 30 mm 410071

Length Weight Max. thickness Insertion depth Item No.

Hundt Pipe Crimper 52For fastening of metal pipes up to max. 1.0 mm thickness, lightweightand handy, opening automatically, handles PVC-coated, reinforced.

240 mm 690 g 1 mm 52 mm 410072

Length Weight Max. thickness Insertion depth Item No.

Hundt Tinsmith' Round Nose PliersForged of chrome-vanadium steel, non-twistable, handles PVC-coated.

240 mm 320 g 410038


FREUND Radius Edge Roller

FREUND Standard Edge RollerEasily readable scale (mm), loops to hang from work belt, expandablewith a second Standard Edge Roller and adapter to become a dual ben-ding machine, suitable for small radiuses.

5 - 200 mm 0.7 mm steel sheet

Bend height Max. sheet thickness411900

Item No.

For bending curved sheet metal and producing tight radii, suitable forinner and outer radii, movement with optimal power transmission / leve-rage, bending height is continously adjustable, scale in mm

5 - 25 mm 0.7 mm steel sheet

Bend height Max. sheet thickness411907

5 - 50 mm 0.7 mm steel sheet 411908

Item No.





30

Hand Tools1


Hundt Grip Pliers with Wire CutterMade of chrome-vanadium-steel, Made in Germany, nickel plated,semi-circular gripping jaws, application field: round and flat materials.

Hundt Grip Pliers, standardWith vinyl quick-release lever, nickel-plated.

140 mm 410109110 mm 410127

180 mm 410110250 mm 410111300 mm 410112

Length Item No.

180 mm 410150250 mm 410149

Length Item No.

Hundt Grip PliersWith drop-forged jaws made of chrome-vanadium-steel, made inGermany, combined jaw shape, application field: flat, round, shapedand square materials.

Hundt Grip Pliers with straight JawsMade of chrome-vanadium-steel, Made in Germany, application field:flat materials.

180 mm 410120250 mm 410121

Length Item No.

180 mm 410113250 mm 410114

Length Item No.

Gedore Grip Pliers 137 10With adjusting screw and blue dip-insulated release lever, forged andtempered jaws; special jaw shape for secure gripping, clamping andholding; safe release, release lever under constant pressure of special-spring, nickel-plated.

240 mm 550 g

Length Weight32 mm 410098

Clamping width Item No.



31

Hand Tools 1


Hundt C-Clamp Grip PliersMade of chrome-vanadium-steel, Made in Germany, nickel-plated,application field: ideal for bulky workpieces and profiled materialswith high ridges.

Made of chrome-vanadium-steel, Made in Germany, with movable jaws.

Hundt Parallel C-Clamp Grip Pliers

280 mm 410100460 mm 410101600 mm 410102

Length Item No.

280 mm 410117175 mm 410944

460 mm 410118600 mm 410119

Length Item No.

Hundt Grip Pliers for Sheet Metal Made of chrome-vanadium-steel, Made in Germany, application field:ideal for clamping, bending and crimping of thin and soft sheet-metals.

Hundt Welding Grip Pliers with Steel JawsMade of chrome-vanadium-steel, Made in Germany.

180 mm 470 g 45 mm 80 mm 410116

Length Weight Capacity Jaw width Item No.

280 mm 790 g

Length Weight60 mm 410115

Capacity Item No.

130 mm 411835

240 mm 410124165 mm 411836

Length Item No.

Hundt Long Nose Grip PliersFor tightening and gripping in narrow tapering spaces, fine serration inthe anterior jaw area, optimal clamping range in relation to force andclamping actions.





32

Hand Tools1


Hundt Combination Pliers Profi-PlusSatin finish, heavy insulated handles.

200 mm 410152

Length Item No.

KNIPEX Combination Pliers 03 00With gripping zones for flat and round material, suitable for versatileuse, with cutting edges for soft and hard wire, long cutting edges forthicker cables, cutting edges additionally induction hardened (approx.60 HRC), special tool steel, forged, oil-hardened, pliers black atramen-tized.

KNIPEX Combination Pliers 03 01With gripping zones for flat and round material, suitable for versatileuse, with cutting edges for soft and hard wire, long cutting edges forthicker cables, cutting edges additionally induction hardened (approx.60 HRC), special tool steel, forged, oil-hardened, handles plasticcoated.

180 mm 410254200 mm 410255250 mm 410256

Length Item No.

KNIPEX Combination Pliers 03 02With gripping zones for flat and round material, suitable for versatileuse, with cutting edges for soft and hard wire, long cutting edges forthicker cables, cutting edges additionally induction hardened (approx.60 HRC), special tool steel, forged, oil-hardened, with multi-componentgrips.

KNIPEX High Leverage Combination Pliers 02 01Easier work due to optimised leverage, with cutting edges (approx.63 HRC) for heavy duty, long cutting edges for thicker cables, withgripping zones for flat and round material, high-grade special toolsteel, forged, oil-hardened, handles plastic coated.

160 mm 410262180 mm 410263200 mm 410264

Length Item No.

180 mm 410239200 mm 410240225 mm 410241

Length Item No.

140 mm 410257160 mm 410258180 mm 410259

Length Item No.200 mm 410260250 mm 410261

Length Item No.



33

Hand Tools 1


Hundt Waterpump Pliers, standardBox-type joint, forged, black lacquered, dipped isolation.

250 mm 410161300 mm 410945

Length Item No.

VBW 966-1 Waterpump PliersBox-type slip-joint, extra-long, half-round jaws, self-clamping to thework piece, saving effort and slip-protected, safety clamping protectionagainst squeezing injuries, high quality for high wear resistance,anti-slip handles, very useful in cold weather.

VBW 188 Waterpump PliersChrome-vanadium steel, induction-hardened jaws, self-grip function onthe workpiece, box-type slip-joint, safety clamping protection againstsqueezing injuries, knurled handles, hardened and tempered.

160 mm 410155250 mm 410162315 mm 410156

Length Item No.

160 mm 410157250 mm 410158315 mm 410159

Length Item No.

KNIPEX Alligator® Waterpump Pliers 88 01Self-locking on pipes and nuts, teeth hardness approx. 61 HRC, box-joint design: high stability due to double guide, robust construction,insensitive to dirt; particularly suitable for outdoor work, chrome-vana-dium electric steel, forged, oil-hardened.

KNIPEX Cobra® Waterpump Pliers 87 01

180 mm 410724250 mm 410725300 mm 410726

Length Item No.

125 mm 410955180 mm 410708


Length Item No

Push the button for adjustment on the workpiece, fine adjustment foroptimum adaptation to different sizes of workpieces and a comfortablehandle width, self-locking on pipes and nuts, teeth hardness approx.61 HRC, box-joint design, chrome-vanadium electric steel, forged, oil-hardened.





34

Hand Tools1


KNIPEX Carpenters' Pincer 50 00For heaviest duty, extreme wear resistance and well balanced, cuttingedges additionally hardened( approx. 60 HRC), special tool steel,forged, oil-hardened.

130 mm 470510160 mm 470511180 mm 470512210 mm 470513

Length Item No.225 mm 470514250 mm 470515300 mm 470516

Length Item No.

130 mm 470517160 mm 470518180 mm 470519210 mm 470520

Length Item No.225 mm 470521250 mm 470522300 mm 470523

Length Item No.

KNIPEX Carpenters' Pincer 50 01For heaviest duty, extreme wear resistance and well balanced, cuttingedges additionally hardened (approx. 60 HRC), special tool steel,forged, oil-hardened, handles plastic-coated.

Hundt Tower Pincer, standardExcellent quality and finishing, DIN1 ISO 9242A, satin-blacklacquered finish, polished jaw.

220 mm 410143250 mm 410144

Length Item No.

KNIPEX Tower Pincer 99 00Twist and cut wire in one operation: fast, reliable and economical;cutting edges additionally hardened (approx. 61 HRC), high-gradespecial tool steel, forged, oil-hardened.

Twist and cut wire in one operation: fast, reliable and economical;cutting edges additionally hardened (approx. 61 HRC), high-gradespecial tool steel, forged, oil-hardened, handles plastic coated.

KNIPEX Tower Pincer 99 01

200 mm 470526220 mm 410131250 mm 410133


Length Item No.

200 mm 470531220 mm 470532250 mm 470533


Length Item No.




35

Hand Tools 1


KNIPEX Tower Pincer 99 04Twist and cut wire in one operation: fast, reliable and economical;cutting edges additionally hardened (approx. 61 HRC), high-gradespecial tool steel, forged, oil-hardened, nickel-plated.

220 mm 470527

280 mm 410529250 mm 470528

Length Item No.

KNIPEX High Leverage Concreters' Nipper 99 10To lace concrete reinforcing steel with binding wire from a roll, wire istwisted and cut in a single pass, high-leverage joint, cutting edgesadditionally hardened (approx. 61 HRC), high-grade special toolsteel, forged, oil-hardened.

To lace concrete reinforcing steel with binding wire from a roll, wire istwisted and cut in a single pass, high-leverage joint, cutting edges additionally hardened (approx. 61 HRC), high-grade special toolsteel, forged, oil-hardened, handles plastic-coated.

To lace concrete reinforcing steel with binding wire from a roll, wire istwisted and cut in a single pass, high-leverage joint, cutting edges additionally hardened (approx. 61 HRC), high-grade special toolsteel, forged, oil-hardened, nickel-plated.

KNIPEX High Leverage Concreters' Nipper 99 11

250 mm 410949300 mm 410537

Length Item No.

250 mm 410950300 mm 410538

Length Item No.

KNIPEX High Leverage Concreters' Nipper 99 14

VBW Double-Fulcrum End Cutting Nipper 500Completely forged, for piano wire and special grade wire,DIN1 ISO 5748.

250 mm 410951300 mm 410539

Length Item No.

210 mm 470019

Length Item No.






36

Hand Tools1


KNIPEX Diagonal Cutter 70 01Precision cutting edges for soft and hard wire, clean cutting of thincopper wires - also at the cutting-edge tips; cutting edge hardnessapprox. 62 HRC, narrow head style, vanadium electric steel; forged,oil-hardened, handles plastic-coated.

110 mm 410566125 mm 410567140 mm 410568


Length Item No.

125 mm 410571140 mm 410572


Length Item No.

460 mm 410510610 mm 410511


Length Item No.

KNIPEX Diagonal Cutter 70 02Precision cutting edges for soft and hard wire, clean cutting of thincopper wires - also at the cutting-edge tips, cutting edge hardnessapprox. 62 HRC, narrow head style, vanadium electric steel; forged,oil-hardened, handles plastic-coated, with multi-component grips.

KNIPEX Bolt Cutter 71 72Cutting capacity up to 48 HRC hardness, robust cutting edges areadditionally induction-hardened, cutting-edge hardness approx. 62HRC, bolted cutter head (replaceable), blade: chrome-vanadiumheavy-duty steel, forged, oil-hardened, with multi-component grips.

VBW Bolt Cutter Waggonit® 980Cutter and tube head made of special steel, drop-forged, hardenedand tempered, simple, accurate adjustment of the cutters thanks toeccentric screws, cutting force up to 48 HRC.

Cutter and tube head made of special steel, drop-forged, hardenedand tempered, simple, accurate adjustment of the cutters thanks toeccentric screws, cutting force up to 48 HRC.

VBW Bolt Cutter Unibolt® 430

460 mm 470005610 mm 470006


Length Item No.

460 mm 470001610 mm 470002


Length Item No.



37

Hand Tools 1


KNIPEX TwinKey® 00 11 01Multifunctional key for the actuation of locking systems from the areas offacilities engineering (heating and sanitation, air conditioning, electrotechnology), gas and water supply and shut-off-systems; 8-arm version:two 4-way spider keys connected in a space-saving way using mag-nets, reversible bit: 1.0 × 7 mm slot and PH2 cross slot, length 92 mm.

Square Triangular Step-like square Item No.5/6-7/8-9/10-11 mm 7-8/9-10/11-12 mm 6-9 mm 410253

Square Triangular Step-like square Item No.5/6/7-8/9-10 mm 7/8-9/10-11 mm 6/7/8/9/10 mm 410277

Square Triangular Length Item No.5/6/8 mm 9 mm 44 mm (02) 4102945/6/8 mm 9 mm 76 mm (03) 410336

Square Triangular Step-like square Item No.5/7/8 mm 9-10 mm 6/7/8/9 mm 410325

Square Triangular Length Item No.5/6/7-8/9-10 mm 7/8-9/10-11 mm 90 mm 410029

KNIPEX Control Cabinet Key 00 11 02/03For control cabinets and shut-off systems in the supply of gas, waterand electricity, for technical installations in buildings, e.g. air condition-ing and ventilation systems, shut-off valves, mains switchboards, etc.,with bit insert: slot 1.0 × 7 mm and cross recess PH2. with adapter for¼" bits chained to key.

KNIPEX Profi-Key 00 11 04Key for heating, air conditioning, sanitary and building technology,e.g. for door and window handles or for radiator-bleeding; with bitinsert: slot 1.0 × 7 mm and cross recess PH2, with adapter for ¼" bitschained to key, length: 90 mm.

KNIPEX Universal Key “Construction” 00 11 06 V01

KNIPEX Universal Key 00 11 06

For locking systems in electrical engineering, the supply of gas andwater, air conditioning and ventilation systems, industry, technicalinstallations in buildings, etc.; 9 different die-cast zinc key-profiles in1 tool, “Construction” version with plug-in, magnetically held support:catch for locks with profile cylinder hole and male square in steps.

For locking systems in electrical engineering, the supply of gas andwater, air conditioning and ventilation systems, industry, technicalinstallations in buildings, etc.; 9 different die-cast zinc key-profiles in1 tool, with detachable chain and snap hook.





38

Hand Tools1


Hundt Locksmiths' Hammer, standardGerman pattern, with wooden curved handle,forged head, black lacquered.

200 g 430102300 g 430103500 g 430105

Weight Item No.

Hundt Locksmiths' Hammer with hickory handleDIN1 1041, GS2 approved

Picard Locksmiths' Hammer with ash handleGerman pattern, DIN1 1041

300 g 430315500 g 430316

1000 g 430317

Weight Item No.

100 g 430045200 g 430046300 g 430047500 g 430048

Weight Item No.800 g 430049

1000 g 4300501500 g 430051

Weight Item No.

Picard Locksmiths' Hammer with steel tube handle Black special grip, TÜV3, GS2

Peddinghaus Locksmiths' Hammer with ultratec handleDIN1 1941, handle cannot be separated from hammer head, madefrom special plastic with glass fibre core - therefore almost unbreakable.

300 g 430043500 g 430044

Weight Item No.

300 g 430035500 g 430036

Weight Item No.800 g 430037

Weight Item No.

1 DIN German Institute for Standardization2 GS Seal of approval, product meets the requirements of § 21 of the German Product Safety Act

3 TÜV Technical Inspection Acency



39

Hand Tools 1


Hundt Rubber Mallet, standardWith wooden handle.

55 mm 43014165 mm 430142

Head-Ø Item No.

Hundt Wooden Mallet, standardMade of white beech.

Made of white beech.

Hundt Wooden Mallet with metal ring

120 mm 60 mm140 mm 70 mm160 mm 80 mm

Length (head) Head Ø430136430137430138

Item No.

100 mm 50 mm120 mm 60 mm140 mm 70 mm

Length (head) Head Ø430072430073430074

160 mm 80 mm 430075180 mm 90 mm 430076

Item No.

Picard Carpenters' Roofing Hammerwith tubular steel shaftFor general construction works, nailing and wood processing;for roofers and carpenters, head black powder-coated, with whettednail pull and point, with magnetic nail holder, with roughened faceand secured head, hardened tubular steel shaft with plastic grip andsteel ring.

Hundt Center PunchAcc. to DIN1 7250, made from air-hardened chrome-molybdenum-vanadium octagonal steel bar, fully hardened, head quenched andtempered.

600 g 430053

Weight Item No.

120 × 10 mm 430055120 × 12 mm 430110

Dimension Item No.





40

Hand Tools1


Hundt PUK Metal Saw FrameRound steel, beech wood handle, fine toothed saw blade,specially hardened.

adjustable version

Hundt Metal Saw FrameFlat steel, with fiber-glass reinforced plastic handle,fine toothed saw blade, specially hardened.

Chrome-plated tubular steel frame, heavy duty finish.

Hundt Metal Saw Frame

146 mm 430310

Blade length Item No.

146 mm 430311


146 mm 430314


300 mm 430300


Hundt Rigid Foam SawSpecial steel, plastic handle, nickel-plated rivets, extra fine toothed,suitable for rigid foam, styrofoam etc.; Made in Germany.

Hundt Hand SawStraight set and hardened toothing, 3-side grinded,with closed plastic handle.

380 mm 470220


300 mm 470205400 mm 470206450 mm 470208600 mm 470209




41

Hand Tools 1


WILPU Hand Saw INSULATION 1125/550 mmHigh quality handsaw for sawing insulation materials like Styropor,PUR, foams, mineral- and glasswool, hemp, wood fibre. Wave formededge with Hardpoint finish.

wave formed

Serration550 mm 430326

Length Item No.

FREUND Saw for StyrofoamSpecial serration for insulating material, perforated blade generatesclearance of kerf for the blade to cut on both the forward and backstroke and ensures easy sawing, with protection guard, ergonomicbi-component grip and index finger guide.

special serration


Length Item No.

FREUND Light Concrete SawJigsaw with cross-grounded serration, protective coating and inductionhardened teeth for long lasting sharpness, 7 teeth per inch, with pro-tection guard, ergonomic bi-component grip and index finger guide,1.2 mm thick blade.

cross-grounded


Length Item No.

550 mm 470399

Length Item No.

STANLEY JetCut™ Plasterboard SawSpecially designed tooth geometry ideal for plasterboard plaster tilescorrugated partitions, 3 sided precision ground teeth offer razor sharpcutting edges at every stage of the stroke, handle with marked 45°and 90° angles.

130 mm 470212

Length Item No.

STANLEY FatMax™ Folding Plasterboard JabsawBlade locking angle mechanism at 90°, 135° and 180°, triple bevel-led toothing allow easier cutting that is up to 50% faster, blade's sharppoint is ideal for punching through plasterboard, anti-slip ergonomic bi-material handle for a comfortable and secure grip, tooth pitch: 7 TPI





42

Hand Tools1


Hundt Insulation Knife with wooden Handle,form BStainless steel blade.

150 mm 470122200 mm 470123


Hundt Insulation Knife with wooden Handle,form AStainless steel blade.

150 mm 470121


Hundt Insulation Shear with long metal HandlesFor cutting glas- and rockwool and expanded-metal, non-slipplastic handles, extra long arms for comfortable working.

1000 mm 1500 g 230 mm 470500

Length Weight Cutting length Item No.

Hundt Insulation Shear with wooden HandlesFor cutting glas- and rockwool and expanded-metal.

500 mm 1200 g 250 mm 470100


Hundt Insulation Shear with short metal HandlesFor cutting glas- and rockwool and expanded-metal, with shortcutting edges, non-slip plastic handles.

500 mm 950 g 170 mm 470600




43

Hand Tools 1


Hundt Insulation Knife with plastic Handle,Made in GermanyCast steel blade.

Hundt Insulation Knife with wooden HandleMade in GermanyCast steel blade.

150 mm A 470124150 mm B 470175

Blade length Form Item No.

150 mm A 470308150 mm B 470138

Blade length Form Item No.

Hundt Insulation Knife, extra long

Hundt Insulation Knife, extra long with scalloped Edge

Suited for the use on thick glass wool, non-slip plastic handle.

Suited for the use on thick glass wool, non-slip plastic handle.

436 mm 195 g 300 mm/2.5 mm 470201

Length Weight Blade length/Thickness Item No.

436 mm 195 g 300 mm/2.5 mm 470204

Length Weight Blade length/Thickness Item No.

Hundt Insulation Knife, double cuttingStainless steel blade, undulated edge for soft materials, scallopededge for hard materials.

200 mm 470128280 mm 470129






44

Hand Tools1


Hundt Insulation Knife Casing made of zinc die casting, smooth ground blade for cutting styrofoam, glass fibre and other insulating materials and foams.

245 mm 150 g 140 mm 470119

Length Weight Blade length Item No.

Hundt Insulation Knife, ultraflexibleFor cutting insulation materials, ultraflexible blade,black plastic handle.

310 mm 470144


Hundt Insulation Knife Special knife for cutting insulation materials (e.g. Armaflex),blade: special molybdenum steel, handle: black beech wood,Made in Germany.

180 mm 470125250 mm 470126


Hundt Leather SheathFor insulation knives.

150 mm 470118200 mm 470109280 mm 470110


Hundt GrindstoneFor grinding of insulation knives.

200 mm 470120

Length Item No.



45

Hand Tools 1


Hundt Knife Set, 4 partsFor Armaflex, with plastic cover, consisting of 1 grindstone and3 knives (blade length: 80, 150 and 280 mm).

4 parts 470199

Knife set Item No.

280 mm 470701360 mm 470702480 mm 470703

Length Item No.

155 mm 470700

Length Item No.

Hundt Insulation Saw Blade, extra hardInterchangeable double cutting stainless steel blade, without handle,suitable to be used with electric sabre reciprocating saws withstandard 1/2” attachment, extra hard blade (56 - 58 HRC).

Hundt Handle for Insulation Saw BladeStable in two positions: straight and 60º bent, tool holder forreciprocating saws.

Erdi D123S Safety Strap CutterCutting of steel straps up to 32 × 1 mm with just one hand, holds ban-ding tightly during cutting to prevent banding from springing up,ERGO‐handle for increased comfort – reduced hand fatigue!

260 mm 600 g 400035

Length Weigth Item No.

Erdi Jewellers’ SnipsCompletely nickel coated.

straight 180 mm 90 g 400004curved 175 mm 90 g 400005

Edges LLength Weigth Item No.





46

Hand Tools1


Erdi Industrial and Professional Scissors D860Robust design, black handle, long and round handle loops.

175 mm 200 g 470130200 mm 230 g 470131225 mm 270 g 470132250 mm 280 g 470133


Hundt Leather ScissorsPolished blades, black handle, serrated edge.

200 mm 350 g 470135250 mm 420 g 470136


210 mm 70 g 400217


Hundt Glass Cutter with 2 knivesFor an exact and fast production of packing rings from all materialssuch as cardboard, leather,gum, plastics, etc.

40 - 200 mm 470190

Diameter Item No.

Erdi Multi-Purpose Scissors D820Stainless steel blades, comfortable handle loopswith soft cushion inserts.

STANLEY Drywall Circle CutterPrecision calibrated for accuracy, cuts clean holes up to 40 cm Ø,easy to read standard marking, pin adjusts up and down.

40 cm 470072

Max. Ø Item No.



47

Hand Tools 1


STANLEY Cutter Knife, standardCutter Autolock (standard), ABS plastic handle, stainless steel bladeguiding. Standard accessories: 2 blades.

180 mm 470041

Length Item No.

STANLEY Snap-off BladesWith straight cutting edge, 7 breakable blade segments (= 8 bladepoints). Package content: 10 pieces

STANLEY Utility Knife 99E, retractableInterlocking nose to hold blade securely, three-position retractableblade, blade storage in handle, multi-position blade slide, blade madeof carbon alloy steel. Standard accessories: heavy duty blades

18 mm 470031

Blade width Item No.

155 mm 470040

Length Item No.

STANLEY Safety Utility Knife 99E, self-retracting Spring-loaded blade retracts automatically when pressure on slide but-ton is released, machine screw firmly holds knife body together - screw-driver required for blade change, contoured handle and textureddie-cast body for slip-resistance, integrated blade storage in handle.Standard accessories: heavy duty blades (rounded)

STANLEY Trapezoid Heavy Duty Blades 1992 Heavy duty, general purpose blade, fit all standard STANLEY knives,ideal for carpet, vinyl and any other material requiring a stiffer andstronger blade. Package content: 10 pieces.

155 mm 470042

Length Item No.

62 mm 470030






48

Hand Tools1


Hundt Cutting Stand, horizontally mounted Suitable for films and aluminium coarse grain, very space-saving,mobile on 3 wheels by slight tipping.

700 mm 200 kg 209100

Roll Ø Roll weight Item No.

Hundt Cutting Stand, vertically mounted

Hundt Isoplast® Setting Tool and Fastening Knobs

Suitable for films and aluminium coarse grain, very space-saving.

250 mm 80 kg 100 cm 208110500 mm 200 kg 100 cm 208100

Roll Ø Roll weight Cutting width Item No.

Plastic setting tool for PVC film, straight and angled.

Hundt Cutting Device / Insulation Shear for TablesSuitable for cutting insulating wool on wire mesh and plastic, lateralstop with measuring scale, blade guard automatic, high quality knifesets made of Solingen steel.

580 mm 16 kg 208058710 mm 23 kg 208070

Cutting length Weight Item No.

Hundt FolienCut100 Foil Cutting DeviceFor cutting protective foil in thermal, acoustic and fire protection areaswithout time-consuming measuring, accurate and time-saving work by ameasurement chart on the unit, scale shows pipe diameter with appro-priate insulation thickness at 100% and 50% insulation, cutting lengthimmediately readable on a larger scale, max. roll diameter: 14 cm.

100 mm 12 kg 208200140 mm 13 kg 208210

Foil width Weight Item No.

straight 470320angeled 470321knobs 470325

Item Item No.



49

Hand Tools 1


STANLEY Manual Hog Ringer P7For fastening of wire, for stapling of jute or other fabrics and clinchingof same materials on wire frames.

STANLEY “C” Ring Staple SR8Zinc-plated, PU: 2500 pieces.

360 g 470270

Weight Item No.

21 mm 470275

Crown depth Item No.

For quick closure of pipe sheating such as e.g. coarse grain and PVCsheathing, for fastening climate membrane foil on Styrodur etc., pin-ning, underloading system guarantees easy and quick loading of thestaples, infinitely adjustable impact strength.

Regur Spredex 7 Pin Gun

Rapid PRO R33E Staple GunPowerful metal staple gun designed for demanding professional useand precision performance, particularly appreciated for its extendedworking life, easy to squeeze trigger with 3-step force adjuster, suitablefor many tough jobs including fastening of heavy textiles, carpet, leat-her, netting, canvas and other more sensitive textiles.

Rapid PRO R23E Staple GunA light, easy to use metal staple gun ideal for demanding, professionaljobs and precision operation; perfect for users with smaller hands andcan be applied to diverse tasks including furniture upholstery or faste-ning of thinner fabrics, leather, paper, labels or sensitive textiles.

13 4 - 8 mm 470228

Staple type Staple height Item No.

13 6 - 14 mm 470229


Regur 11 6 - 12 mm 470254






50

Hand Tools1


Hundt Ratchet HandleMade of chrome-vanadium-steel, with “Quick-Release”, 48-theethpower ratchet, ergonomic 2-component handle.

1/4" 4303311/2" 411305

Drive Item No.

Hundt Socket BitMade of chrome-vanadium-steel, chrome-plated.

hexagonal 1/2" square 1/4"

10 mm 41130613 mm 41130717 mm 41130819 mm 411321

Wrench size Item No.7 mm 4113128 mm 411313

10 mm 41131613 mm 411330

Wrench size Item No.

Hundt Combination WrenchAcc. to DIN1 3113A, chrome-plated.

Hundt Reversing Combination Ratchet WrenchWith blocking ring, ratchet head 15° offset.

7 mm 4113148 mm 411300

10 mm 41130113 mm 411302


7 mm 4118028 mm 411803

10 mm 411805


Stahlwille Double Combination Ratchet Wrench 25With bi-hexagon, chrome-plated.

7 × 8 mm 411823





51

Hand Tools 1


Hundt Screwdriver, slotAcc. to DIN1 5265, ISO 2380, cylindrical wooden handle, hexagonforged blade, made of high-alloy CV special steel, nickel-plated.

Hundt Screwdriver, cross slotAcc. to DIN1 ISO 8764, ylindrical wooden handle, hexagon forgedblade, made of high-alloy CV special steel, nickel-plated.

Hundt Screwdriver, slotAcc. to DIN1 5265, ISO 2380, heavy design, handle made ofcellulose acetate, blade made of high-alloy CV special steel.

5.5 ×100 mm 4302097.0 ×125 mm 4302108.0 ×150 mm 430215

Dimension Item No.

PH1 × 80 mm 430219PH2 × 100 mm 430220PH3 × 150 mm 430222

Blade/Length Item No.

6.0 x 100 mm 4302037.0 x 125 mm 4302308.0 x 150 mm 430231


Hundt Screwdriver, cross slotAcc. to DIN1 ISO 8764, heavy design, handle made of celluloseacetate, blade made of high-alloy MOV/CV special steel.

Hundt Screwdriver, slotAcc. to DIN1 5265, ISO 2380, blade made of high-alloy chrome-vanadium special steel, with forged hexagon portion.

PH1 × 80 mm 430206PH2 × 100 mm 430240PH3 × 150 mm 430212


5.5 ×100 mm 4302346.5 ×125 mm 4302358.0 ×150 mm 430251







6.5 × 25 mm 4302808.0 × 25 mm 430221PH2 × 25 mm 430285

52

Hand Tools1


Hundt Screwdriver, cross slotAcc. to DIN1 ISO 8764, blade made of high-alloy chrome-vanadium special steel.

Hundt Socket WrenchAcc. to DIN1 3125, blade made of high-alloy chrome-vanadium special steel.

Blade made of high-alloy CV steel, nickel-plated.

Hundt Stubby Screwdriver, reversible

25 mm 430281

Blade Length Item No.

PH1 × 80 mm 430239PH2 × 100 mm 430260PH3 × 150 mm 430241


7 mm 4302708 mm 430272

10 mm 430274


Hundt Stubby Screwdriver, blackBlade made of high-alloy molybdenum-vanadium or chrome-vanadiumspecial steel.

6.5 × 25 mm 4302658.0 × 25 mm 430282PH2 × 25 mm 430284


Hundt Stubby Screwdriver, redHandle cellulose acetate, blade made of high-alloy CV steel,nickel-plated.





53

Hand Tools 1


Hundt Cartridge PistolSteel metal sheet, half shell for placing the cartridge,zinc-plated push rod.

320 ml 470360

Volume Item No.

For cartridge, transparent plastic pipe, with high-pressure trigger,suitable for materials with high viscosity.

COX Cartridge Applicator Pistol Powerflow™ Combi

COX Cartridge PistolAll-steel, skeletal form for placing the cartridge,patented fine push, Made in England.

320 ml 470351

Volume Item No.

310 ml 470373400 ml 470374

Volume Item No.

COX Cartridge Applicator Pistol Powerflow™ Combi For foil bags, transparent plastic pipe, with high-pressure trigger,suitable for materials with high viscosity.

310 ml 470375400 ml 470376600 ml 470377

Volume Item No.

COX Pneumatic Cartridge Pistol Airflow 1™Direct mechanism in which the air pressure affects directly on thecartridge piston valve, lightweight, compact, easy access in smallestcorners.

310 ml 313001400 ml 313002

Volume Item No.





54

Hand Tools1


Hundt Japanese Spatula Set4 pieces (5 - 12 cm), hardened flexible steel, for applying and smooth-ing filler and plaster on smaller surfaces, plastic back acid-resistant.

5 - 12 cm 470037

Dimensions Item No.

Hundt Glue Spatula Hardened steel, wooden handle 2-way riveted, trapezoidal toothing.

180 mm 470047

Length Item No.

Hundt Painters' ScraperHardened steel, full-tang blade, wooden handle.

40 mm 47003560 mm 47004680 mm 470036

Length Item No.

Hundt Bricklayers' TrowelStainless steel, lacquered beechwood handle.

60 mm 47006380 mm 470039

Length Item No.

With long handle, rustproof.

Hundt Plastering Trowel

80 mm 470062

Length Item No.



55

Hand Tools 1


Hundt Bricklayers' TrowelStainless steel, S-neck, lacquered beechwood handle.

180 mm 470045

Length Item No.

Hundt Filling TrowelHardened steel, lacquered beechwood handle.

10 mm 470058

Length Item No.

Hundt Smoothing Trowel, stainlessFor universal applying and smoothing to ceiling, wall and floor;stainless steel, robust design, aluminum bar, bent beechwood handle,lacquered.

280 × 130 mm 470315

Length×Width Item No.

Hundt Sanding BlockMade of plastic, 2 steel clips for holding abrasive layer,cellular rubber pad.

210 mm 470038

Length Item No.

Hundt Plaster PlaneFor universal smoothing of plasterboard edges, ergonomically shapedplastic handle lies well in the hand, rough blade, enables quicksmoothing.

250 mm 470313

Length Item No.





56

Hand Tools1


Hundt Section Setting / Crimper PliersFor sheet metal profiles, quick and efficient punching for the setting ofrails and studs without screws or rivets.

340 mm 410027

Length Item No.

Hundt Section Setting / Crimper PliersFor one-hand operation, for sheet metal profiles, quick and efficientpunching for the setting of rails and studs without screws or rivets,restoring spring, replaceable punch and punching die, made of hard-ened carbon steel AISI 1045.

270 mm 410028

Length Item No.

STANLEY Surform Metal Body Planer FileCan be set in two positions to be used as either a plane or a file,fitted with replaceable standard cut blade.

310 mm 470032

Length Item No.

Hundt Keyhole SawFor drilling and sawing, circular serration ideal for sawing small radii,with drillbit and spoon that enlarges the hole for easier sawing;suitable for plasterboard, wood, leather, rubber, plastic, mouldedmaterials.

360 mm 470276

Length Item No.

Knipex Punch Lock Riveter 90 42 250For one-hand operation, to join metal section sheets used in dry wal-ling with a lock seam, for U- and C-shaped sections with max 1.2 mmmetal (2 × 0.6 mm), minimum handforce required due to optimumlever transmission, pliers body: special tool steel, rolled, oil-hardened.

250 mm 410525

Length Item No.



57

Hand Tools 1


Hundt Chalk Powder for Chalk Liner Reelblue powder in bottle: 180 g, red powder in bag: 34 g.

red 290014blue 290039

Colour Item No.

Hundt Chalk Liner ReelLight metal case, with crank handle, delivery without chalk powder.

15 m 290013

Line length Item No.

Hundt Bricklayers' CordFor universal alignment, red polyethylene Ø 1 mm, round braided,insensitive to dirt and moisture, high tear-out force.

50 m 470306

Length Item No.

FREUND Profile Cutter 125Cuts almost all UW-, CW-, T- and corner profiles; easy and clean cuts,blade made of hardened special steel, regrinding not necessary,infinitely adjustable mechanism with automatic locking, no flyingsparks, suitable for fire restricted areas, cutting depth up to 0.8 mm,length 1200 mm. Standard accessories: angle 650 mm, stand.

20 - 125 mm 410090

Profile width Item No.

Hundt Beading PliersFor locking air conditioning and ventilation ducts, adjustable stop withinsertion depth of 3 - 20 mm, smooth one-handed operation with trans-mission, 2-component handles with large hand protection.

325 mm 410044

Length Item No.





58

Hand Tools1


Hundt Soldering Fluid Brush

Hundt Flat Brush

Armaflex brush with long sheet shaft.

With tinplate ferrule.

Hundt Ring BrushWith light Chinese bristles.

Hundt Enamel Varnish BrushWith light Chinese bristles.

250 mm 290001

Length Item No.

12 29002914 290020

Size Item No.

1.0" 2900331.5" 290017

Size Item No.

2 2900034 2900326 290030

Size Item No.

Hundt Radiator Brush With light Chinese bristles.

1.0" 2900311.5" 2900052.0" 2900162.5" 2900073.0" 290008

Size Item No.



59

Hand Tools 1


Hundt Flat Hand File Rectangular file, tanged, cut on three sides, one side uncut, shape Aaccording to DIN1 7261. Three application-oriented cuts available:cut 1: roughing, coarse stock removal; cut 2: general use; cut 3: finefinishing. Surface work, deburring, filing of rectangular geometries,filing of breakthroughs.

Hundt Half Round FileHalf-round, tanged, cut on two sides, shape E according to DIN1 7261,oustanding filing performance thanks to PFERD spiral cut.Three application-oriented cuts are available: cut 1: roughing, coarsechipping; cut 2: general use; cut 3: fine finishing.Surface work, filing of radius areas, deburring, filing of breakthroughs,filing of half-round shapes.

2

Cut200 mm 430002

Length Item No.

2

Cut200 mm 430004

Length Item No.


Kabi Glue Can with straight Spout and BrushFor glueing of insulation materials, textiles and leather; with airtightcap, capacity: 0.25 l

17 mm 440800

Brush Ø Item No.

Kabi Glue Can with bent Spout and BrushFor glueing of insulation materials, textiles and leather; with airtightcap, capacity: 0.25 l

17 mm 440803

Brush Ø Item No.

Brush for Kabi Glue CanWith airtight cap.

11 mm 44080117 mm 440802

Brush Ø Item No.





61

Riveting Tools 2


Hundt Blind Rivet Plier HZHeavy duty, 4 nose pieces: 2.4, 3.2, 4.0 and 4.8 mm.

250 mm 500250

Length Item No.

VVG Blind Rivet Assortments BZ 6 Assortment box made of reinforced plastic containing blind rivet plierBZ 6 (360° rotating head) incl. installation wrench and blind rivets infollowing versions:

VVG Blind Rivet Plier BZ 2 With opening spring, for rivet shank Ø 2.4 up to 5.0 mm.Standard accessories: 4 nose pieces

Titgemeyer Blind Rivet Plier TIOS® 4Single-lever plier which can set blind rivets of all materials in sizes from2.4 up to 4.0 mm Ø, robust construction and simple to use, ideal forlow-volume applications, supplied with 3 standard nose pieces (2 arestored in the handle), with opening spring, housing made of lightmetal special casting with cast-in steel insert for the nose pieces.

225 mm 500450

Length Item No.

255 mm 500300

Length Item No.

Blind Rivet Assortments Head Quantity Item No.OPTO® Alu/Steel dome 350 500236

OPTO®/CERTO® Stainless/Stainless dome 150+200 500238OPTO® Alu/Stainless Steel large dome 170 500237

GESIPA® Blind Rivet Plier NTSWith opening spring, working range: blind rivets up to 5 mm Øaluminium and 4 mm Ø steel and stainless steel. Standard accessoires: 4 nose pieces 10/18, 10/24, 10/27 and10/32; 1 maintenance wrench, operating instruction, spare parts list.

275 mm 500580

Length Item No.



62

Riveting Tools2


GESIPA® Blind Rivet Plier NTX(-F)Working range: blind rivets up to 5 mm Ø aluminium and 4 mm Østeel and stainless steel, (with opening spring). Standard accessoires:3 nose pieces 10/18, 10/24 and 10/32; 1 maintenance wrench,operating instruction with spare parts list.

VVG Lazy Tong Blind Rivet Tool BZ 58 Working range: rivet Ø 3.0 – 5.0 mm all materials, rivet Ø 6.0 – 6.4mm aluminium. Standard accessories: nose pieces rivet Ø 3.0 + 3.2mm, 4.0 mm, 4.8 + 5.0 mm, 6.0 mm, 6.4 + 8.0 mm.

GESIPA® Lazy Tong Blind Rivet Tool SN 2Working range: blind rivets Ø 3.0 – 6.4 mm all materials. Standardaccessories: 5 nose pieces for Ø 3.2 mm, 4.0 mm, 4.8 mm,6.0 mm and 6.4 mm; 1 maintenance wrench, operating instructionwith spare parts list.

720 mm 500106

Length open Item No.

832 mm 500119

Length open Item No.

GESIPA® Lever Riveting Tool HN 2Working range: blind rivets Ø 3.0 – 6.4 mm all materials (except Poly-Grip®) blind rivets with 6.4 mm Ø made of stainless steel and G-Bulb®

blind rivets. Standard accessories: 5 nose pieces 16/29, 16/32,16/36, 16/40 and 16/45; spent mandrel container, maintenanceinstruction with spare parts list.

570 mm 500120

Length Item No.

Working range: blind rivets up to 5 mm Ø aluminium and 4 mm Østeel and stainless steel. Standard accessoires: 3 nose pieces 10/18,10/24 and 10/29; 1 maintenance wrench (on magazine), operat-ing instruction with spare parts list.

GESIPA® Blind Rivet Plier Flipper®

212 mm 500100

Length Item No.

yes 260 mm 500550

opening spring Length Item No.

no 260 mm 500500



63

Riveting Tools 2


VVG Lever Tool BZ 70 for Blind RivetsFor blind rivets steel, stainless steel and copper 3mm - 5 mm Ø,for blind rivets aluminium 3 mm - 6 mm ØStandard accessories: 4 nose pieces, plastic case.

VVG Lever Tool BZ 72 for Blind RivetsFor blind rivets stainless steel 4.0 - 6.0 mm Ø, for blind rivets steel andcopper 4.0 mm - 6.4 mm Ø, for blind rivets aluminium 4.0 mm - 8.0mm Ø Standard accessories: 5 nose pieces, plastic case.

460 mm 500277

Length Item No.

460 mm 500104

Length Item No.

VVG Hand Tool Multi 1For setting blind rivets, blind rivet nuts and blind rivet bolts, robustversion of lacquered steel, continuous pivotable 360°rotating head.Standard accessories: 4 nose pieces for blind rivets, conversation kitfor blind rivet nuts M3 - M6, threaded sleeve for blind rivet bolts M4-M6 for RIFBOLT® threaded bolts, jaw wrench AF 15/19, AF 12/17,AF 5/8; plastic case.

2.4 - 5.0 mm Ø 500142

Blind rivets Item No.

VVG Lever Tool Multi 5 For setting blind rivets, blind rivet nuts and blind rivet bolts, robust ver-sion of lacquered steel, foldable arms. Standard accessories: 4 nosepieces for blind rivets, conversation kit for blind rivet nuts M4 - M10,threaded sleeve for blind rivet bolts M4 - M8 for RIFBOLT® threadedbolts, jaw wrench AF 15/19, AF 12/17, AF 5/8, plastic case.

3.2 - 6.4 mm Ø 500143

Blind rivets Item No.





64

Riveting Tools2


VVG Hand Tool VNG 371 for Blind Rivet NutsFor blind rivet nuts M5 - M10 aluminium, M5 - M8 steel and M5 -M6 stainless steel; pliers also suitable for blind rivet bolts M5 - M8steel, quick-change system for the mandrel. Standard accessories:conversation kit for blind rivet nuts M5 - M10, threaded sleeve for RIF-BOLT® blind rivet bolts M5 - M8, jaw wrench AF 10 and AF 14, hexhead wrench AF 6, plastic case.

503 mm 500221

Length Item No.

GESIPA® Hand Tool GBM30 for Blind Rivet NutsFor blind rivet nuts M3* - M10 aluminium / steel and M8 brass /stainless steel. Standard accessoires: for each version 1 threadedmandrel and 1 nose piece M5/M6/M8/M10.

* threaded mandrel and nose piece M3 available as seperateaccessoire

M5 500130

M8 500131M6 500129

M10 500132

Version Item No.

GESIPA® Hand Tool FireFly® for Blind Rivet NutsFor blind rivet nuts M3 - M6 aluminium and M3 - M5 steel.Standard accessoires: 1 nose piece and 1 threaded mandrel M4 andM 5 in each case, 2 Mini-Pack Blind Rivet Nuts Alu M4 and M5,operating instruction and stroke table.

202 mm 500260

Length Item No.

VVG Hand Tool VNG 255 for Blind Rivet NutsContinuous pivotable 360° rotating head for hard-to-reach processingpositions, for blind rivet nuts M4-M6 and RIFBOLT® blind rivet boltsM4- M5, robust version of lacquered steel, with stroke adjustment.Standard accessories: plastic case, conversation kit for blind rivet nutsM4-M6, threaded sleeve for RIFBOLT® blind rivet bolts M4-M5, jawwrench AF 22 and AF 24, hex head wrench AF 6.

290 mm 500115

Length Item No.



65

Riveting Tools 2


GESIPA® Cordless Riveting Tool PowerBird® Pro 18V 2.1AhWorking range: blind rivets 6.4 mm Ø all materials up to 8.0 mm Øaluminium, BULB-TITE®-blind rivets up to Ø 7.7 mm all materials,MEGA GRIP® blind rivets up to Ø 6.4 mm all materials.Standard accessoires: 4 nose pieces 17/32, 17/36, 17/40,17/45, battery 14.4V 2.6Ah, charger, operating instruction withspare parts list, wrench size 12 mm (hood of nose piece magazine),delivery in plastic case.

GESIPA® Cordless Riveting Tool AccuBird®

14.4V 1.3AhWorking range: blind rivets up to 5 mm Ø all materials, BULB-TITE®

blind rivets 4.0, 5.2 and 6.3 mm Ø aluminium and steelStandard accessories: 4 nose pieces 17/24, 17/27, 17/29 and17/32, battery 14.4V 1.3Ah, charger, operating instruction withspare parts list, wrench size 12 mm (hood of nose piece magazine),delivery in cardboard box.

delivery in steel case 500850

GESIPA® Cordless Riveting Tool AccuBird® Pro 18V 2.1AhWorking range: blind rivets up to 5 mm Ø all materials, BULB-TITE®

blind rivets 4.0, 5.2 and 6.0 mm Ø aluminium and steel.Standard accessories: 4 nose pieces 17/24, 17/27, 17/29 and17/32, 1 battery 18V 2.1Ah, charger, operating instruction withspare parts list, wrench size 12 mm (hood of nose piece magazine),delivery in plastic case.

GESIPA® Cordless Riveting Tool PowerBird®

14.4V 2.6AhWorking range: blind rivets 4.8 mm Ø steel up to 6.4 mm Ø all mate-rials, BULB-TITE®-blind rivets up to Ø 7.7 mm all materials, MEGAGRIP® blind rivets up to Ø 6.6 mm alu and steel, G-Bulb® and Poly-Grip® blind rivets up to Ø 6.4 mm all materials.Standard accessoires: 4 nose pieces 17/32, 17/36, 17/40,17/45, battery 14.4V 2.6Ah, charger, operating instruction withspare parts list, wrench size 12 mm (hood of nose piece magazine),delivery in plastic case.

1×1.3 Ah 20 mm


Weight8500 N 500849

2×1.3 Ah 20 mm 2.3 kg 8500 N 500851


1×2.6 Ah 20 mm


Weight13000 N 500121

2×2.6 Ah 20 mm 2.2 kg 13000 N 500144


1×2.1 Ah 25 mm


Weight20000 N 500867


1×2.1 Ah 25 mm


Weight10000 N 500853






66

Riveting Tools2


GESIPA® Cordless Riveting Tool FireBird® 14.4V 1.3AhWorking range: blind rivets up to M10 aluminium, up to M8 steel andM6 stainless steel. Standard accessoires: nose piece and threadedmandrel M6 in working position, nose pieces and threaded mandrelsM4 and M5, Li-Ion-Battery 14.4V 1.3Ah, charger, double openended wrench AF 24/27, operating instruction with spare parts list,delivery plastic case.

1×1.3 Ah 7 mm


Weight13500 N 500139

2×1.3 Ah 7 mm 2.3 kg 13500 N 500222


VVG Cordless Riveting Tool Rivdom®TWO 20V 2.0AhWorking range: blind rivets up to 6.4 mm Ø of all materials - also forhigh-strength versions, transparent mandrel collector, brushless motor,practical belt clip, LED lighting, improved ergonomics, reduced weight.Standard accessories: charger, battery 20V 2.0Ah, 4 nose pieces,mounting wrench, L-Boxx.

VVG Cordless Riveting Tool Rivdom®ONE 16V 2.0AhWorking range: blind rivets up to 5 mm Ø of all materials (aluminium,steel, stainless steel, copper), transparent mandrel collector, brushlessmotornew trigger with extremely short travel, hanger for balancer, inte-grated mandrel holder, practical belt clip, LED lighting.Standard accessories: charger, battery 16V 2.0Ah, 4 nose pieces,

mounting wrench, L-Boxx.

1×2.0 Ah 30 mm


Weight20000 N 500430

2×2.0 Ah 30 mm 2.3 kg 20000 N 500425


VVG Cordless Riveting Tool RivSmart 12V 2.0AhThe lightest cordless riveter in the world with networked process moni-toring and control (i.a. via app). Working range: blind rivets up to 5mm Ø of all materials (aluminium, steel, stainless steel, copper);powerful, brushless motor; perfected clamping mechanism, new triggerwith extremely short travel enables fast and comfortable work, optionalautomatic or manual return. Standard accessoires: charger, battery12V 2.0Ah, 4 nosepieces, mounting wrench, L-Boxx.

1×2.0 Ah 21 mm


Weight10000 N 500411

2×2.0 Ah 21 mm 1.8 kg 10000 N 500409


1×2.0 Ah 21 mm


Weight10000 N 500408

2×2.0 Ah 21 mm 1.8 kg 10000 N 500407




M3 2.4 kg 18500 N 500270

M5 2.4 kg 18500 N 500272

M8 2.4 kg 18500 N 500274

M4 2.4 kg 18500 N 500271

M6 2.4 kg 18500 N 500273

Version Weight Traction power Item No.

67

Riveting Tools 2


GESIPA® Pneumatic Setting Tool PH 2 for Blind RivetsFor blind rivets 3 - 5 mm Ø all materials, 2.4 mm Ø with small jaws.Standard accessoires: 5 nose pieces 16/32 (in working position),16/24, 16/27, 16/29, 16/36 (enclosed), 1 set of jaws, spentmandrel bottle, 1 wrench each of MSU and MSZ, operating instructionwith spare parts list.

GESIPA® Pneumatic Setting Tool TAURUS®1for Blind RivetsFor blind rivets 2.4 - 3.2 mm Ø all materials and up to 4 mm Øaluminium/steel. Standard accessoires: 3 nose pieces 17/18,17/20 and 17/22, wrenches size 12/14 and 14/17, 1 bottlehydraulic oil 100 ml, 1 oil-refill can, operating instruction with spareparts list.

GESIPA® Pneumatic Setting Tool FireFox®2for Blind Rivet NutsFor blind rivet nuts M3 - M12 (all materials), with adjustable tractionpower and stroke. Standard accessoires: 1 threaded mandrel and 1nose piece for each version, 2 double open ended wrench size24/27, hex screwdriver wrench size 4 mm, hydraulic oil 100 ml.

VVG Pneumatic Setting Tool BZ 103A for Blind RivetsIndividually adjustable suction of the mandrel (permanent/interval),improved ergonomics, hose connection installation left or right side,low-noise, working area: rivet Ø 2.4 – 5.0 mm aluminium, rivet Ø 3.0– 5.0 mm steel, stainless steel and copper. Standard accessories:4 nose pieces, 1 set of clamping jaws, 1 bottle hydraulic oil,2 mandrel collectors, carrying case.

1.8 ltr 15 mm 1.3 kg 8800 N 500802

Air consumption Stroke Weight Traction power Item No.

1.0 ltr 15 mm 1.3 kg 5500 N 500140


2.4 ltr 18 mm 1.8 kg 11700 N 500110






68

Riveting Tools2


VVG Pneumatic Setting Tool VNG903for Blind Rivet Nuts + BoltsStroke-controlled, automatic beading by light pressure onto the man-drel, adjustable unstringing time, automatic beading stop, low-noise,improved ergonomics, hose connection installation left or right side,working area: blind rivet nuts M4 - M12 aluminium/steel/stainlesssteel, blind rivet bolts M4 - M8 steel. Standard accessories: conversionkits for blind rivet nuts (without M12), 1 bottle hydraulic oil (incl. re-fillunit), aluminium case.

VVG Pneumatic Setting Tool VNG703for Blind Rivet Nuts + BoltsForce regulation guarantees that the blind rivet nut is always set in anoptimal and material-preserving way. Working area: blind rivet nutsM4 - M8 aluminium, blind rivet nuts M3 - M8 steel/stainless steel,blind rivet bolts M4 - M6 steel. Standard accessories: conversion kitsfor blind rivet nuts, 1 bottle hydraulic oil (incl. re-fill unit), aluminiumcase.

VVG Pneumatic Setting Tool BZ123A for Blind RivetsFor high-strength blind rivets up, adjustable suction of the mandrel (per-manent/interval), hose connection installation left or right side, low-noise, working area: rivet Ø 4.0 – 8.0 mm aluminium and steel, rivetØ 4.0 – 6.4 mm stainless steel, rivet Ø 4.0 – 6.0 mm copper. Standard accessories: 4 nose pieces, 2 mandrel collectors, 1 set ofclamping jaws,1 bottle hydraulic oil (incl. re-fill unit), aluminium case.

3.5 ltr 25 mm 2.34 kg 18700 N 500112


3.5 ltr 18 mm 2.5 kg 24000 N 500245


4.4 ltr 9 mm 2.5 kg 20000 N 500118


4.4 ltr 9 mm 2.5 kg 20000 N 500101


VVG Pneumatic Setting Tool BZ143A for Blind RivetsPowerful specialist for high-strength blind rivets up to 7.8 mm diameter,high-strength blind rivets are being set very comfortable and reliablythrough the combination of normal stroke, very high setting force(24.000 N) and clamping jaws that are optimized for the mandrel´sgrooving. Standard accessories: 2× retainer nose pieces, 2× mandrelcollectors, 1 set of clamping jaws, 1 bottle hydraulic oil (incl. re-fillunit), aluminium case.



69

Power and Cordless Tools 3


DEWALT Cordless Beading Machine 18V 4.0AhSuitable for workshop and construction site, very flexible in usage,maintenance-free unit. Standard accessories: charger, 2 batteries 18 V4.0 Ah Li-Ion, 2 pair of beading rollers (further beading rollers optional),carrying case.

Speed 0-22/44/min.Torque 31 NmPerformance/aluminium 1.2 mmPerformance/zinc sheet 1.0 mmPerformance/stainless steel 0.9 mmBattery voltage 18 VBattery capacity 4.0 AhWeight 3.9 kg Item No. 330250

Makita Cordless Beading Machine 18V 4.0AhVery flexible in usage, maintenance-free unit.Standard accessories: charger, 2 batteries 18 V 4.0 Ah, 2 pair ofbeading rollers (further beading rollers optional), carrying case.

Speed 0-22/44/min.Torque 31 NmPerformance/aluminium 1.2 mmPerformance/zinc sheet 1.0 mmPerformance/stainless steel 0.9 mmBattery voltage 18 VBattery capacity 4.0 AhWeight 3.9 kg Item No. 304300

Hundt Stand for Cordless Beading MachinesSuitable for both models.

Weight 2 kgItem No. 304301





70

Power and Cordless Tools3


Makita DF332DSMJ Cordless Drill Driver 10.8V 4.0AhPowerful, brushless motor for high working speed and high torque,twentyfold torque setting + drill setting, implemented temperature con-trol, overload protection and deep discharge protection, bright LED.Standard accessoires: MAKPAC, charger DC10SA, 2 batteries 4.0Ah

No-load speed 1st gear 0-450 min-1

No-load speed 2nd gear 0-1500 min-1

Drilling Ø steel 10 mmDrilling Ø wood 28 mmMax. torque soft 21 NmMax. torque hard 35 NmDrill chuck clamping width 0,8-10 mmBattery voltage 10.8V / 4.0Ah Weight 1.0 kgItem No. 300015




Makita DF331DSMJ Cordless Drill Driver 10.8V 4.0AhPowerful motor for high working speed and high torque, battery capa-city indicator, 18 torque settings + drill setting, implemented tempera-ture control, overload protection and deep discharge protection.Standard accessoires: MAKPAC, charger DC10SA, 2 batteries 4.0Ah




Makita DDF343RYLJ Cordless Drill Driver 14.4V 1.5AhSingle sleeve keyless drill chuck for easy bit installation/removal, com-pact and lightweight design for easy handling, conveniently locatedpush button for forward and reverse, high comfort grips, LED job lightwith afterglow, metal gears, two speed gear box. Standard accessoires: MAKPAC, charger DC18RA, 2 batteries1.5Ah, lamp.



71



Makita DDF458RTJ Cordless Drill Driver 18V 5.0AhPowerful, very short battery drill/driver; full metal planetary gears,right/left operation, 21 torque settings, dust and splash protection,bright LED with after glow function, sensitively adustable speed, batterycapacity indicator. Standard accessoires: MAKPAC, chargerDC18RC, 2 batteries 5.0Ah, belt clip, side grip.



Drilling Ø steel 13 mmDrilling Ø wood 76 mmMax. torque soft 58 NmMax. torque hard 91 NmDrill chuck clamping width 1.5-13 mmBattery voltage 18V / 5.0Ah Weight 2.3 kgItem No. 300091

Makita DDF459RTJ Cordless Drill Driver 18V 5.0AhBrushless motor for more endurance, more compact housing, full metalplanetary gears, 16 torque settings, bright LED, sensitively adustablespeed, right/left operation.Standard accessoires: MAKPAC, charger DC18RC, 2 batteries5.0Ah, contact protection cap, mounting hanger.



Drilling Ø steel 13 mmDrilling Ø wood 38 mmMax. torque soft 25 NmMax. torque hard 45 NmDrill chuck clamping width 1.5-13 mmBattery voltage 18V / 5.0Ah Weight 1.7 kgItem No. 309528

Makita DDF484RTJ Cordless Drill Driver 18V 5.0AhCompact design with overall length of 172 mm, aluminium gear hou-sing, all metal gear construction, electric brake, variable speed controlby trigger, forward/reverse rotation, keyless chuck, LED job light.Standard accessoires: MAKPAC, charger DC18RC, 2 batteries 5.0Ah,belt clip, PH/LS double-bit



Drilling Ø steel 13 mmDrilling Ø wood 38 mmMax. torque soft 30 NmMax. torque hard 54 NmDrill chuck clamping width 1,5-13 mmBattery voltage 18V / 5,0Ah Weight 1,8 kgItem No. 305021





72



Makita DFS452RTJ Cordless Drywall Screwdriver18V 5.0AhPush&Drive technology for longer battery runtime: The brushless motorstarts the screwing process only when the screw is contacted, battery capacity indicator, pistol grip for handy machine guidance,easy adjustable depth stop, noiseless switching off slipping clutch, highspeed for quick work progress, bright LED, brushless motor.Standard accessoires: MAKPAC, charger, 2 batteries 5.0Ah,mounting hanger, magnetic holder, PH bit 2×25mm


Drywall screws 5 mmBattery voltage 18 V / 5.0AhWeight 1.8 kgItem No. 300104

Makita DTD148RTJ Cordless Impact Screwdriver18V 5.0AhBattery impact screwdriver with 3 steps, brushless motor for more endu-rance, short and compact housing, T-mode for optimal processing ofself-tapping Teks-screws, dust and splash protection, handle with rub-ber cushioning, bright LED.Standard accessoires: MAKPAC, charger ,2 batteries 5.0Ah, contactprotection cap, mounting hanger.



No-load speed 3rd gear 0-3200 min-1

No-load stroke rate 1st gear 0-1100 min-1

No-load stroke rate 2nd gear 0-2600 min-1

No-load stroke rate 3rd gear 0-3500 min-1

Max. torque hard 175 NmBattery voltage 18V / 5.0Ah Bit holder 1/4"Weight 1.5 kgItem No. 302015

Makita DDA333DZ Cordless Angle Drill 10.8VHandy: only 84 mm from top edge of gear head to drill chuck point,motor brake, bright LED with after glow function, compatible with allMakita 10.8V sliding batteries. Delivery in cardboard box, without batteries and charger.


Drilling Ø steel 10 mmDrilling Ø wood 12 mmDrill chuck clamping width 0-10 mmBattery voltage 10.8VWeight 1.4 kgItem No. 300205



73



Makita DDA351RTJ Cordless Angle Drill 18V 5.0AhHandy: only 93 mm from top edge of gear head to drill chuck point,motor brake, single sheath quick-change drill chuck, compact 4-polemotor without torque loss with low power consumption, bright LED,electronically adjustable speed, right/left operation.Standard accessoires: MAKPAC, charger, 2 x battery 5.0Ah, contactprotection cap, side grip.


Drilling Ø steel 10 mmDrilling Ø wood 25 mmCorner dimension 93 mmDrill chuck clamping width 1.5-10 mmBattery voltage 18V / 5.0Ah Weight 1.8 kgItem No. 300228

Bosch GSR 12V-15 Cordless Drill Driver 2.0AhThe handy powerhouse: At 169 mm it has an extremely short designfor optimum handling, especially when performing drilling andscrewdriving applications overhead and in tight spaces, professionalquality 10 mm Auto-Lock drill chuck, 2-speed gearbox ensures apowerful torque when drilling and screwdriving. Standard accessoires: 2 batteries 2,0Ah, charger GAL 1230 CV, L-Boxx.



Drilling Ø steel 10 mmDrilling Ø wood 19 mmMax. torque soft 15 NmMax. torque hard 30 NmBattery voltage 12V / 2.0Ah Weight 0.9 kgItem No. 340005

Bosch GSR 12V-15 FC Cordless Drill Driver 2.0AhFlexibility of five solutions in one compact tool: drill driver with a mag-netic bit holder, lockable bit holder, drill chuck, angle adapter and off-set angle adapter; perfect for hard-to-reach places, 20 torque settings+ drill setting. Standard accessoires: 2 batteries 2.0Ah, charger GAL1230 CV, drill chuck adapter, bit holder adapter, angle adapter, offsetangle adapter, L-Boxx.



Drilling Ø steel 10 mmDrilling Ø wood 30 mmMax. torque soft 15 NmMax. torque hard 30 NmDrill chuck clamping width 1-10 mmBattery voltage 12V / 2.0Ah Weight 0.8 kgItem No. 342141





74



Bosch GSR 18 V-EC FC2 Cordless Drill Driver 5.0AhFlexibility of five solutions in one compact tool: bit holder, drill chuckadapter, angle adapter, off-set angle adapter and rotary hammeradapter; adapters can be locked in 16 different positions (360°) wit-hout having to remove them from the cordless screwdriver, perfect forhard-to-reach places. Standard accessoires: 2 batteries 5.0Ah, charger GAL 1880 CV, bit holder, drill chuck adapter, angle adapter,off-set angle adapter and rotary hammer adapter, L-Boxx.



Drilling Ø steel 13 mmDrilling Ø wood 38 mmMax. torque soft 31 NmMax. torque hard 50 NmDrill chuck clamping width 1,5-13 mmBattery voltage 18V / 5.0Ah Weight 1.7 kgItem No. 342196

Bosch GSR 18 V-EC TE Cordless Drywall Screw-driver 5.0AhShortest head length (207 mm) for precise work, locking button forcontinuous and fatigue-free work, adjustable depth stop for precisescrew depth setting, compatible with MA 55 Professional collatedscrewgun attachment (optional) for driving rows of screwsStandard accessoires: 2 batteries 5.0Ah, charger GAL 1880 CV,depth stop, magnetic universal holder, screwdriver bit PH 2, L-Boxx.


Max. torque soft 5 NmMax. torque hard 25 NmBit holder 1/4" internal hexagonMax. screw Ø 4.2 mm

Weight 1.6 kgBattery voltage 18V / 5.0Ah

Item No. 340074


Max. torque hard 11 NmDrilling Ø wood 10 mmDrill chuck clamping width 10 mmMax. screw Ø 4,2 mmBattery voltage 12V / 2,0AhWeight 1,2 kgItem No. 342143

Bosch GWB 12V-10 Cordless Angle Drill 2.0AhThe compact solution for hard-to-reach areas, extremely versatilethanks to 5 head position settings: 0°/22.5°/45°/67.5°/90°, helleLED light, shortest (only 11 cm) adjustable head with 10-mm Auto-Lock chuck, motor brake for precise work when driving rows ofscrews. Standard accessoires: 2 batteries 2.0Ah, charger GAL 1230CV, L-Boxx.



75



FEIN ABOP 6 Select Cordless Drill 18VFast-running single-speed drill with excellent speed stability, up to 6 mmin steel in metal construction, single sheath quick clamping drill chuck,variable speed control, reversible. Standard accessoires: additionalhandle, rapid charger, SUPRA SKE single sheath metal quick clampingdrill chuck, plastic tool case. Batteries and charger not included.

FEIN ABOP 10 Select Cordless Drill 18VCompact single-speed drill with speed stability up to 10 mm in steelfor on-site installation work even in tight spaces and corners, automaticspindle locking and single sheath quick clamping drill chuck, reversibleStandard accessoires: additional handle, rapid charger, SUPRA SKEsingle sheath metal quick clamping drill chuck, plastic tool case.Batteries and charger not included.

FEIN ASCS 6.3 Select Cordless Metal Screw Gun 18VSpeed-optimised cordless drill/driver for screw connections in metal upto a diameter of 6.3 mm, powerful battery for more than 150 screwconnections in 1.25 mm trapezoidal sheet metal on to 2 mm steel,electronic torque shut-off for precise results even without a depth stop,Maintenance-free, brush-free and highly-effective EC motor. Standard accessoires: hook, depth stop, insert for hexagon bolts, plas-tic tool case. Batteries and charger not included.


Full load speed 0-1500 min-1

Max. torque (hard/soft) 30/10 NmMax. screw Ø 6,3 mm

Battery voltage 18VBit holder 1/4 "




Torque at max. output power 4 NmDrilling Ø wood 20 mmDrilling Ø (stainless) steel 6 mmDrilling Ø alu 10 mmDrill chuck clamping width 0.5-10 mmBattery voltage 18VWeight 1.7 kgItem No. 360105



Torque at max. output power 11 NmDrilling Ø wood 30 mmDrilling Ø (stainless) steel 10 mmDrilling Ø alu 15 mmDrill chuck clamping width 1.5-13 mmBattery voltage 18VWeight 1.8 kgItem No. 360309





76



Makita 6807 Drywall ScrewdriverMade for the most demanding screwing applications in the hardestmaterials, 2 speed gear selection give both speed and torque for thetoughest materials, perfect for fixing where cyclonic conditions prevail,durable depth sensitive silent clutch design for consistent screw driving.Standard accessoires: Side grip, 3/8" socket bit + nozzle, locatorassembly, carrying case.



Bit holder 1/4"Max. torque/hard 35 NmPower input 500 WWeight 2.2 kgItem No. 300148

Makita FS2300 Drywall Screwdriver

Makita FS2700J Drywall Screwdriver

Low speed high torque by 2-stage gear, large surface switch with elec-tronics and optimally placed right/left run switch, silent switch-off, withbright LED, simple depth adjustment and tool change by one-touchguide sleeve. Standard accessories: guide sleeve, magnetic bit holder1/4" 60 mm, PH Bit 2×25mm.


Dry wall screws up to 5 mmSelf-tapping screws up to 6 mmBit holder 1/4" hexagon socketTorque 25 NmPower input 570 WWeight 1.6 kgItem No. 300176

Low speed high torque by 2-stage gear, extra reinforced gearbox forlong service life, silent switch-off, with bright LED.Standard accessories: guide sleeve, carrying case.


Dry wall screws up to 6.0 mmSelf-tapping screws up to 6.0 mm

Driving shank 1/4" hexagon socketTorque 32 NmPower input 570 WWeight 1.8 kgItem No. 300215

Wood screws up to 6.2 mm



77

Power and Cordless Tools


Bosch GSR 6-25 TE Drywall Screwdriver

Bosch GSR 6-45 TE Drywall Screwdriver

FEIN SCT 5-40 X Drywall Screwdriver

3

Powerful 701 W high-performance motor, high torque enables power-ful screwdriving, precise driving rows of screws to a constant depth dueto exact shut-off clutch and depth stop that can be operated with onehand, compact design. Standard accessoires: tool case, magnetic uni-versal holder, bit PH2×25mm, depth stop, belt clip.


Bit holder 1/4" hexagon socketMax. torque 20 NmPower input 701 WWeight 1.5 kgItem No. 341025

Quick work progress in fastening drywalls due to optimally coordi-nated speed and torque, precise driving rows of screws to a constantdepth due to exact shut-off clutch and depth stop that can be operatedwith one hand, forward/reverse operation. Standard accessoires: toolcase, magnetic universal holder, bit PH2×25mm, depth stop, belt clip.



Silent FEIN CLIC-STOP clutch for working without causing a distur-bance, no damage in drywall due to depth stop, infinitely variableelectronic speed setting, vibration-free stop, dust-proof stop sleeve.Standard accessoires: hand strap, belt clip, depth stop with dust-proofprotection, magnetic holder for bits 1/4", bit 1/4" for cross-slottedscrews size PH2 with dust-protection ring.







78



3

FEIN SCT 5-40 M Drywall Screwdriverwith collated Screw Magazine Speed-optimised; for rapid fixing of plasterboard to wood or metalframes., silent FEIN CLIC-STOP clutch, QuickIN for tool-free removalcollated strips, setting of screw length and driving depth as well asquick cleaning, additional depth stop for non-collated screws.Standard accessoires: collated cartridge for collated screws, handstrap, belt clip, depth stop, magnetic holder for bits 1/4", bit 1/4" forcross-slotted screws PH2 with dust-protection ring, plastic carryingcase.


Bit holder 1/4"Max. torque 12 NmPower input 450 WWeight 1.6 kgItem No. 360076

Makita 6413 Rotary DrillCompact and lightweight design yet with high durability, high speed,ideal for engineering applications, comfortable soft grip, keylesschuck, variable speed and reversing feature, double insulated.Standard accessoires: quick-change drill chuck 10 mm.


Drilling Ø steel 10 mmDrilling Ø wood 25 mmDrill chuck clamping width 1.5-10 mmPower input 450 W Weight 1.3 kgItem No. 306410

Makita DP2010J Rotary DrillWith gear rim drill chuck, depth stop with rubber stopper, ideal forseries drilling (e.g. holes for blind rivets, tapping screw etc.)Standard accessories: gear rim drill chuck, drill chuck key


Drilling Ø steel 6.5 mmDrilling Ø wood 15 mmDrill chuck clamping width 0,8-6,5 mmPower input 370 W Weight 1.1 kgItem No. 316501



79



Makita DP2011J Rotary Drill

Makita DA3010FJ Angle Drill

Makita DA3011FJ Angle DrillWith quick drill chuck, extremly low height - only 83 mm from drivehead upper side to quick drill chuck point, right/left rotation, withbright LED. Standard accessories: quick drill chuck, side grip,MAKPAC.

No-load speed 0 - 2400 min-1

Drilling Ø steel 10 mmDrilling Ø wood 25 mmDrill chuck clamping width 1.5 - 10 mmPower input 450 W Weight 1.6 kgItem No. 300096

With gear rim drill chuck, extremly low height - only 79 mm from drivehead upper side to gear rim drill chuck point, right/left rotation, withbright LED. Standard accessories: gear rim drill chuck, depth stop,MAKPAC.


Drilling Ø steel 10 mmDrilling Ø wood 25 mmDrill chuck clamping width 1.5 - 10 mmPower input 450 W Weight 1.6 kgItem No. 300095

Makita DP2011J Rotary DrillWith quick drill chuck, depth stop with rubber stopper, ideal for seriesdrilling (e.g. holes for blind rivets, tapping screw etc.).Standard accessories: quick drill chuck, MAKPAC.


Drilling Ø steel 6.5 mmDrilling Ø wood 15 mmDrill chuck clamping width 0.8 - 6.5 mmPower input 370 W Weight 1.1 kgItem No. 300097





80



Bosch GBM 6 RE Rotary DrillCompact design and low weight for easy handling, very high speedfor small drilling diameters, Control Electronic for precise drilling starts,practical belt clip, forward/reverse operation.Standard accessoires: quick-clamping drill chuck

Bosch GBM 10 RE Rotary DrillCompact design and low weight for optimal handling, Control Elec-tronic for precise drilling starts, metal quick-change drill chuck for highprecision and long lifetime, forward/reverse operation.Standard accessoires: quick-clamping drill chuck


Drilling Ø steel 6.5 mmDrilling Ø wood 15 mmDrill chuck clamping width 1 - 10 mmPower input 350 W Weight 1.2 kgItem No. 341006


Drilling Ø steel 10 mmDrilling Ø wood 25 mmDrill chuck 1 - 10 mmPower input 600 W Weight 1.7 kgItem No. 341012

FEIN BOP 6 Rotary DrillFast-running single-speed drill with good speed stability, up to 6 mm insteel in metal construction; safe, silent and vibration-free working; one-handed tool changeover due to automatic spindle lock, 2-finger-switchwith variable speed control. Standard accessoires: quick-clamping drillchuck, delivery in cardboard box.


Drilling Ø steel 6 mmDrilling Ø wood 20 mmDrill chuck 0.5 - 10 mmPower input 500 W Weight 1.7 kgItem No. 360636

Delivery in case 360630



81



Makita HR2470 Drill Hammer SDS+3 functions: rotation, rotation + percussion, percussion only. 360°chisel angle positioning and chisel locking in 40 different positions,variable electronic speed control, torque limiter.Standard accessoires: depth stop, side grip, carrying case.


No-load impact rate 0-4500 min-1

Drilling Ø steel 13 mmDrilling Ø wood 32 mmDrilling Ø concrete 24 mmSingle impact energy 2.4 JPower input 780 W Weight 2.9 kgItem No. 306019

Makita HR2631FT13 Combination Hammer SDS+For drilling, hammer drilling and chiselling; with anti-vibration for AVT,with SDS-PLUS tool holder and quick-change chuck for cylindric bits,unlatching coupling, convenient drilling depth adjustment by smoothslider, right/left rotation, with LED.Standard accessories: tquick-change chuck SDS-plus, quick-changechuck, side grip, depth stop, transport case.



Drilling Ø steel 13 mmDrilling Ø wood 32 mmDrilling Ø concrete 26 mmSingle impact energy 2.4 JPower input 800 W Weight 3.0 kgItem No. 300039

FEIN BOP 10 Rotary DrillCompact single-speed drill with speed stability, up to 10 mm in steelfor on-site installation work; safe, silent and vibration-free working, one-handed tool changeover due to automatic spindle lock, 2-finger-switchwith variable speed control. Standard accessories: quick-clamping drillchuck, delivery in cardboard box.


Drilling Ø steel 10 mmDrilling Ø wood 30 mmDrill chuck 1.5-13 mmPower input 500 W Weight 1.7 kgItem No. 360351

Delivery in case 360639





82



Makita HR2811FT Combination Hammer SDS+SDS Plus type chuck 3 mode: hammer, rotary hammer and drilling.compact L-shaped motor housing, one-touch sliding chuck enableseasy bit changes, ergonomically designed handle with rubberised gripprovides more control and comfort.Standard accessoires: side grip, depth stop, quick change chuck SDS-plus, carrying case.



Drilling Ø steel 13 mmDrilling Ø wood 32 mmDrilling Ø concrete 28 mmEinzelschlagstärke 2.8 JPower input 800 W Weight 3.6 kgItem No. 300089

Bosch GBH 3-28 DFR Rotary Hammer SDS+Top performance with low vibration due to Bosch Vibration Control,rotation stop for chiselling, ball grommet for preventing cable breaks,rotating brush plate for equal power in forward and reverse rotation,impact stop for drilling in wood and metal. Standard accessoires:Carrying case, auxiliary handle , depth stop 210mm, keyless chuck13 mm, SDS-plus quick-change chuck.



Drilling Ø steel 13 mmDrilling Ø wood 30 mmDrilling Ø masonry/drill bit 68 mmDrilling Ø concrete 4 - 28 mmSingle impact energy 3.1 JoulePower input 800 W Weight 3.6 kgItem No. 340205

Delivery in L-Boxx 340328

Bosch GBH 2-28 Rotary Hammer SDS+KickBack Control for increased user protection, Vibration Control for effortless and continuous work in time-intensive applications, rotatingbrush plate for equal power in forward and reverse rotation, overloadclutch, continuously variable speed control for clean drilling starts, lock-ing button for continuous and fatigue-free work. Standard accessories:auxiliary handle, depth stop 210 mm, L-Boxx.



Drilling Ø steel 13 mmDrilling Ø wood 30 mmDrilling Ø masonry 68 mmDrilling Ø concrete 4 - 28 mmSingle impact energy 3.2 JPower input 850 W Weight 2.9 kgItem No. 341226



83



Makita UT1200 Paddle MixerUsed to stir and mix paint, glue, tile adhesive etc.; electronically con-trollable speed, robust bow-shaped handle for safe grip even at hardworks, lockable switch with switch-on guard.Standard accessories: bow-shaped handle complete.


Mixing Capacity 30 kg



Max. basket Ø max. 120 mmTool holder thread M14Power input 960 WWeight 3.2 kgItem No. 300073

Makita UT1400 Paddle MixerUsed to stir and mix paints, plaster, mortar, tile adhesive, levelling andsmoothing compounds and similar materials; electronically controllablespeed, robust bow-shaped handle for safe grip even at hard works,ockable switch with switch-on guard. Standard accessories: bow-shaped handle complete.


Stirring cage Ø max. 140 mmToolholder M14Power consumption 1300 WWeight 5.2 kgItem No. 300045

Makita UT1600 Paddle MixerDesigned for use in mixing materials of high viscosity such as prefabmortar and plaster, cement, lime, concrete, quartz filled epoxy resins,screed, pastes, sealing compunds, as well as qypsum and granulatesin batches; 2-gear- drive, electronically controllable speed, robust bow-shaped handle for safe grip even at hard works, ockable switch withswitch-on guard. Standard accessories: bow-shaped handle complete

No-load speed 1./2. Gang 0 - 250/0 - 580 min-1

Stirring cage Ø max. 180 mmToolholder M14Power consumption 1800 WWeight 7.1 kgItem No. 316915





84



TRUMPF TruTool S 160 Cordless Sheet Metal Shears10.8V 2.0AhBurr-free cutting, clear view of the work surface and cutting line,precise cutting, best possible flexibility in curves, minimum forcerequired thanks to optimum cutting geometry, low operating costs as aresult of the 4-way cutter rotation. Standard accessories: 2 batteries2.0Ah, battery charger 100-240 V, cutter (integrated), belt clip,TRUMPF Box.

Max. sheet thickness (steel 400N/mm²) 1.6 mmMax. sheet thickness (steel 600N/mm²) 1.2 mmMax. sheet thickness (alu 250N/mm²) 2.0 mmWorking speed 5-9 m/minMin. start hole Ø 27 mmSmallest radius 15 mmBattery voltage/capacity 10.8 V/2.0 AhStroke rate 2800 min-1


TRUMPF TruTool S 160 Sheet Metal ShearsSmallest and most manoeuvrable machine in its power class, perfectcutting results in thin mild steel sheets, also an excellent choice for workwith stainless steel, low operating costs as a result of the 4-way cutterrotation. Standard accessories: cutter (integrated), 2 hex headwrenches DIN 911-2 and DIN 911-3, TRUMPF Box.

Max. sheet thickness (steel 400N/mm²) 1.6 mmMax. sheet thickness (steel 600N/mm²) 1.2 mmMax. sheet thickness (alu 250N/mm²) 2.0 mmWorking speed 8-12 m/minMin. start hole Ø 27 mmSmallest radius 15 mmPower consumption 350 WStroke rate 4800 min-1


TRUMPF TruTool S 250 Cordless Sheet Metal Shears18V 2.0AhExcellent performance on curves, quick and precise work and alwaysan unrestricted view of the work surface and cutting line, low opera-ting costs as a result of the 4-way cutter rotation. Standard accessories: 2 batteries 2.0Ah, charger 100–240V, cutter (integrated), hex head wrench 4 mm, hex head wrench DIN 911-2.5,TRUMPF Box.

Max. sheet thickness (steel 400N/mm²) 2.5 mmMax. sheet thickness (steel 600N/mm²) 2.0 mmMax. sheet thickness (alu 250N/mm²) 3.0 mmWorking speed 4-7 m/minMin. start hole Ø 20 mmSmallest radius 28 mmBattery voltage/capacity 18V / 2.0AhStroke rate 1300 min-1





85



TRUMPF TruTool S 250 Sheet Metal ShearsLightweight shear for the mid power range, offering excellent perform-ance on curves, ideal for continuous use, low operating costs as a re-sult of the 4-way cutter rotation. Standard accessories: cutter(integrated), hex head wrench 4 mm, hex head wrench DIN 911-2.5,TRUMPF Box.



TRUMPF TruTool S 350 Sheet Metal ShearsUniversal sheet metal cutters, height adjustment for the cutters meansthat you can achieve the perfect setting for every application and forevery sheet thickness, cutters each have two cutting edges and can beused either at the top or bottom. Standard accessories: cutter (inte-grated), handle, feeler gauge, grease gun (filled with "G1"), tube ofgrease "G1" 25 g, 2 hex wrenches, TRUMPF Box.

Max. sheet thickness (steel 400N/mm²) 3.5 mmMax. sheet thickness (steel 600N/mm²) 3.0 mmMax. sheet thickness (alu 250N/mm²) 4.0 mmWorking speed 4-6 m/minMin. start hole Ø 50 mmSmallest radius R30 /L16 mmPower consumption 1400 WStroke rate 1600 min-1


TRUMPF TruTool S 450 Sheet Metal ShearsSheet metal cutters with unbeatable performance, height adjustment forthe blades means that you can achieve the perfect setting for every ap-plication and for every sheet thickness, cutters each have two cuttingedges and can be used either at the top or bottom. Standard accessories: cutter (integrated), handle, feeler gauge, greasegun (filled with "G1"), tube of grease "G1" 25 g, 2 hex wrenches,TRUMPF Box.

Max. sheet thickness (steel 400N/mm²) 4.5 mmMax. sheet thickness (steel 600N/mm²) 3.5 mmMax. sheet thickness (alu 250N/mm²) 5.0 mmWorking speed 4-6 m/minMin. start hole Ø 75 mmSmallest radius R35 /L25 mmPower consumption 1400 WStroke rate 1600 min-1






86



TRUMPF TruTool C 160 Slitting ShearsIdeal for cutting tasks where you do not need to clip chips during thecutting process, for straight sheets and curved cuts.Standard accessories: straight cutter 1.0-1.6 mm (integrated), 2 cut-ting blades with screws (integrated), hex head wrench, TRUMPF Box.



TRUMPF TruTool C 160 Cordless Slitting Shears10.8V 2.0AhHandy cordless slitting shears without chip clipper, offering excellentperformance on curves; ideal for straight, distortion-free cuts and C-L-Uprofiles; rotatable cut guides. Standard accessories: 2 batteries 2.0Ah,charger 100-240 V, cutter (integrated), belt clip, TRUMPF Box.

Max. sheet thickness (steel 400N/mm²) 1.6 mmMax. sheet thickness (steel 600N/mm²) 1.2 mmMax. sheet thickness (alu 250N/mm²) 2.0 mmWorking speed 5-9 m/minMin. start hole Ø 15 mmSmallest radius 90 mmBattery voltage/capacity 10.8 V/2.0 AhStroke rate 2500 min-1


TRUMPF TruTool C 160 Cordless Slitting Shears10.8V 2.0Ah + Chip Clipper

Manoeuvrable cordless slitting shears with chip clipper for two-handedoperation, ideal for interior cutouts and notches, rotatable cut guides.Standard accessories: 2 batteries 2.0Ah, charger 100-240 V, cutter(integrated), belt clip, chip clipper (integrated), TRUMPF Box.

Max. sheet thickness (steel 400N/mm²) 1.6 mmMax. sheet thickness (steel 600N/mm²) 1.2 mmMax. sheet thickness (alu 250N/mm²) 2.0 mmWorking speed 5-9 m/minMin. start hole Ø 15 mmSmallest radius 90 mmBattery voltage/capacity 10.8 V/2.0AhStroke rate 2500 min-1






87



TRUMPF TruTool C 160 Slitting Shears+ Chip ClipperManoeuvrable cordless slitting shears with chip clipper for two-handedoperation, ideal for interior cutouts and notches, rotatable cut guides.Standard accessories: straight cutter 1.0 - 1.6 mm (integrated), 2 cut-ting blades with screws (integrated), hex head wrench, chip clipper (in-tegrated), TRUMPF Box.



TRUMPF TruTool C 250 Slitting Shears + Chip ClipperThe most powerful slitting shears, chips can be easily cut with onehand at the touch of a button, perfect for interior cutouts and notches.Standard accessories: straight cutter 1.5 - 2.5 mm (integrated), 2 cut-ting blades with screws (integrated), TRUMPF Box.



TRUMPF TruTool C 250 Cordless Slitting Shears18V 2.0Ah + Chip ClipperChips can be easily cut with one hand at the touch of a button, per-fect for interior cutouts and notches. Standard accessories: 2 batteries2.0 Ah, charger 100–240V, straight cutter 1.5 - 2.5 mm (integrated),2 cutting blades with screws (integrated), belt clip, TRUMPF Box.

Max. sheet thickness (steel 400N/mm²) 2.5 mmMax. sheet thickness (steel 600N/mm²) 1.5 mmMax. sheet thickness (alu 250N/mm²) 3.0 mmWorking speed 3-10 m/minMin. start hole Ø 22 mmSmallest radius 150 mm (straight cutter)Battery voltage/capacity 18V/2.0AhStroke rate 2400 min-1







88



FEIN BLS 1.6 E Sheet Metal ShearsEasy-to-use and curve-compatible for cutting and trimming thin sheets,four-fold reversing blade for clean and burr-free cutting with low operat-ing costs, good curve precision with low sheet-metal distortion. Standard accessoires: 1 pair of blades, 1 set of wrenches, handguard.

Max. sheet thickness (steel 400N/mm2) 1.6 mmMax. sheet thickness (steel 600N/mm2) 1.2 mmMax. sheet thickness (alu 250N/mm2) 2.0 mmWorking speed 8-12 m/minSmallest radius 15 mmPower consumption 350 WStroke rate 2.300 - 3.800 min-1


FEIN BLS 2.5 E Sheet Metal ShearsEasy-to-use and curve-compatible for trimming and cutting stainlesssteel, four-fold reversing blade for clean and burr-free cutting with lowoperating costs, good curve precision with low sheet-metal distortion.Standard accessoires: 1 pair of blades, 1 set of wrenches, handguard.

Max. sheet thickness (steel 400N/mm²) 2.5 mmMax. sheet thickness (steel 600N/mm² 2.0 mmMax. sheet thickness (alu 250N/mm²) 3.0 mmWorking speed 3-6 m/minSmallest radius 20 mmPower consumption 350 WStroke rate 800 - 1.700 min-1


FEIN ABLS 18 1.6 E Select Cordless Sheet Metal ShearsEasy-to-use, curve-compatible and fast cordless sheet metal shears forcuts in sheet metal up to 1.6 mm; good curve precision with lowsheet-metal distortion, four-fold reversing blade for clean and burr-freecutting with low operating costs. Standard accessoires: 1 pair ofblades. 1 set of wrenches, hand guard, plastic carrying case. Batteries and charger not included.

Max. sheet thickness (steel 400N/mm2) 1.6 mmMax. sheet thickness (steel 600N/mm2) 1.2 mmMax. sheet thickness (alu 250N/mm2) 2.0 mmWorking speed 6 - 9 m/minSmallest radius 15 mmBattery voltage 18 VStroke rate 2200 - 3700 min-1




89



FEIN BSS 1.6 E Slitting ShearsEasy-to-use and curve-compatible for distortion-free cutting with just onecontinuous chip, left and right curve cuts, QuickIN for rapid toolfreeblade changing with no further adjustment required.Standard accessories: 1 cutter (straight, up to 1.6 mm), 1 pair ofcutting bars, 1 key.

FEIN BSS 1.6 CE Slitting Shear + Chip ClipperEasy-to-use and curve-compatible, distortion-free cutting possible withjust one continuous chip, chip clipper for clipping off the cut chip atany point. Standard accessories: 1 cutter (straight, up to 1.6 mm), 1pair of cutting bars, 1 key.

Max. sheet thickness (steel 400N/mm²) 1.6 mmMax. sheet thickness (steel 600N/mm²) 1.2 mmMax. sheet thickness (alu 250N/mm²) 2.0 mmWorking speed 6-10 m/minImmersion Ø 15 mmCutting width 5 mmSmallest radius 90 mmPower consumption 350 WStroke rate 2.100 - 4.500 min-1


Max. sheet thickness (steel 400N/mm²) 1.6 mmMax. sheet thickness (steel 600N/mm²) 1.2 mmMax. sheet thickness (alu 250N/mm²) 2.0 mmWorking speed 6-10 m/minImmersion Ø 15 mmCutting width 5 mmSmallest radius 90 mmPower consumption 350 WStroke rate 2.100 - 4.500 min-1


FEIN ABSS 18 1.6 E Select Cordless Slitting ShearsEasy-to-use, curve-compatible cordless slitting shears for distortion-freecuts and cut-outs in sheet metal up to 1.6 mm; left and right curve cutsand distortion-free cutting possible with just one continuous chip, cut-ting blade with excellent tool life, clean swarf removal prevents injuriesor scratches on workpieces. Standard accessories: 1 cutter (straight, upto 1.6 mm), 1 pair of cutting bars, key, plastic carrying case.Batteries and charger not included.

Max. sheet thickness (steel 400N/mm²) 1.6 mmMax. sheet thickness (steel 600N/mm²) 1.2 mmMax. sheet thickness (alu 250N/mm²) 2,0 mmWorking speed 5 - 8 m/minSmallest radius (with curve cutter) 30 mm

Battery voltage 18 VStroke rate 2200 - 3500 min-1


Cutting width 5.0 mm





90



Bosch GSC 75-16 Metal ShearsOptimal management tools through the small grip circumference, greatspeed cutting spending at low power, excellent maneuverability whencutting in curves, optimize the cut line, powerful 750 W motor, easilyremovable 4-side rotating knives. Standard accessoires: set of knives(integrated), allen key AF 3.

Max. sheet thickness (steel 400N/mm²) 1.6 mmMax. sheet thickness (steel 600N/mm²) 1.2 mmMax. sheet thickness (alu 250N/mm²) 2.2 mmPower input 750 WNo-load stroke rate 5200 min-1


Bosch GSC 12V-13 Cordless Metal Shears 2.0AhExtremely powerful: effortlessly performs cuts up to 1.3 mm in metal,practical battery charge level indicator with 3 LEDs, cutting perform-ance until 60m in steel with one battery charge, reversible blade with4 cutting edges for longer lifetime.Standard accessoires: 2 batteries 2.0 Ah, quick charger, alignmentgauge, allen key, L-Boxx.

Max. sheet thickness (steel 400N/mm²) 1.3 mmMax. sheet thickness (steel 600N/mm²) 0.8 mmMax. sheet thickness (alu 250N/mm²) 2.0 mmSmallest radius 15 mmBattery voltage 10.8 VBattery capacity 2.0 AhStroke rate 3600 min-1



Bosch GSC 18V-16 Cordless Metal Shears 5.0AhThe 18V metal shear for flexible cuts at job site, comparable to 700Wcorded tool, 185mm grip circumference and perfect balance for easyhandling. Standard accessoires: 2 batteries 5.0 Ah, quick charger,L-Boxx.

Max. sheet thickness (steel 400N/mm²) 1.6 mmMax. sheet thickness (steel 600N/mm²) 1.0 mmMax. sheet thickness (alu 250N/mm²) 2.0 mmSmallest radius 35 mmBattery voltage 18 VBattery capacity 5.0 AhStroke rate 3400 min-1





91



Makita JS1602J Metal ShearsSleek housing for optimal guidance, robust cutting table, lockableswitch allows one-hand operation, for clean cuts, cutting chip rolls offsideways in a spiral. Standard accessories: knife set (integrated), allenkey 3 mm, MAKPAC

Max. sheet thickness (steel 800N/mm²) 0.8 mmMax. sheet thickness (steel 600N/mm²) 1.2 mmMax. sheet thickness (steel 400N/mm²)Smallest radius

1.6 mm30 mm

Power consumption 380 WNo-load stroke rate 4000 min-1


Makita JS1601J Metal ShearsHandy and compact design, reinforced drive housing for longer toollife, cutting chip rolls off sideways in a spiral. Standard accessories:cutting blades (integrated), knife set (integrated), align gauge, assem-bly tool, MAKPAC.

Max. sheet thickness (steel 400N/mm²) 1.6 mmMax. sheet thickness (steel 600N/mm²) 1.2 mmMax. sheet thickness (alu 200N/mm²)Smallest radiusHousing Ø

2.5 mm250 mm57 mm



Makita JS1000J Curve ShearsHandy and compact design, for clean cuts with tight radii, reinforceddrive housing for longer tool life, cutting chip rolls off sideways in aspiral. Standard accessories: cutting blades (integrated), knife set(mounted), assembly tool, MAKPAC.

Max. sheet thickness (steel 400N/mm²) 1.0 mmMax. sheet thickness (steel 600N/mm²) 0.7 mmMax. sheet thickness (alu 200N/mm²)Smallest radiusHousing Ø

2.5 mm30 mm57 mm







92



TRUMPF TruTool PN 130 Cordless Profile Nibbler10.8V 2.0AhOutstanding mobility in the curves, distortion free cutting process,360° cutting directions to choose from, simple carrier replacement andintegrated die. Standard accessories: 2 batteries 2.0Ah, charger 100-240 V, punch (integrated), belt-clip, TRUMPF Box S1.

Max. sheet thickness (steel 400N/mm²) 1.3 mmMax. sheet thickness (steel 600N/mm²) 0.8 mmMax. sheet thickness (alu 250N/mm²) 2.0 mmWorking speed 2.5 m/minMin. start hole Ø 15 mmSmallest radius 25 mmBattery voltage/capacity 10.8 V/2.0AhStroke rate 1800 min-1



TRUMPF TruTool PN 200 Cordless Profile Nibbler18V 4.0AhSpecifically designed for trapezoidal sheets up to a profile depth of85 mm and C-L-U profiles, machine can be turned on the spot by360°, cutting direction, punch and tool carrier can be changedquickly, without the need for tools. Standard accessories: 2 batteries4.0Ah, charger 100-240 V, tool PN 200, punch, die, punch guide,wearing plate, TRUMPF Box.

Max. sheet thickness (steel 400N/mm²) 2.0 mmMax. sheet thickness (steel 600N/mm²) 1.5 mmMax. sheet thickness (alu 250N/mm²) 3.0 mmWorking speed 1.6 m/minMin. start hole Ø 24 mmSmallest radius 50 mmBattery voltage/capacity 18V/4.0AhStroke rate 1200 min-1



Max. sheet thickness (steel 400N/mm²) 2.0 mmMax. sheet thickness (steel 600N/mm²) 1.5 mmMax. sheet thickness (alu 250N/mm²) 3.0 mmWorking speed 1.6 m/minMin. start hole Ø 24 mmSmallest radius 50 mmBattery voltage/capacity 18V/4.0AhStroke rate 1200 min-1



TRUMPF TruTool PN 200 Cordless Profile Nibbler18V 4.0Ah SetSpecifically designed for trapezoidal sheets up to a profile depth of85 mm and 165 mm as well as C-L-U profiles, machine can be tur-ned on the spot by 360°, cutting direction, punch and tool carriercan be changed quickly, without the need for tools. Standard accessories: 2 batteries 4.0Ah, charger 100-240 V, toolPN 200+ PN 201, punch, die, punch guide, wearing plate,TRUMPF Box.



93



TRUMPF TruTool N 200 NibblerIdeal tool for interior cutouts and notching and hard-to-access areas,well suited to cut flat- and corrugated sheet metal, highest maneuver-ability by hollow round punch, can rotate on the spot; tool-free cuttingdirection-, punch- and tool change. Standard accessories: punch, die,punch guide, tool N 200, screwdriver TX20, TRUMPF Box S1.

Max. sheet thickness (steel 400N/mm²) 2.0 mmMax. sheet thickness (steel 600N/mm²) 1.5 mmMax. sheet thickness (alu 250N/mm²) 2.5 mmWorking speed 1.5 m/minMin. start hole Ø 16 mmSmallest radius 4 mmPower consumption 500 WStroke rate 1410 min-1


TRUMPF TruTool PN 200 Profile NibblerCuts sheet thicknesses up to 2 mm in mild steel, well-suited for cuts intrapezoidal sheets up to 85 mm and for cutting C-L-U-profiles; tool-freecutting-, punch- and tool change; highest curve maneuverability with360°rotation. Standard accessories: punch, die, punch guide, wearplate, tool PN 200, screwdriver TX20, TRUMPF Box S1.



TRUMPF TruTool PN 200 Profile Nibbler SetEquipped with short and long tool for cuts in trapezoidal sheets (85and 162 mm) and for cutting C-L-U-profiles, cuts sheet thicknesses up to2 mm in mild steel, impressive when cutting double sheets, highestcurve maneuverability with 360°rotation; tool-free cutting-, punch- andtool change. Standard accessories: punch, die, punch guide, wearingplate, tool PN 200 and PN 201, screwdriver, TRUMPF Box.







94



FEIN ABLK 1.3 CSE Select Cordless Nibbler 18VCompact and curve-compatible nibbler for roof and façade con-struction, precise cuts in corrugated sheet metal up to 1.3 mm, cuttingdirection setting can be changed in 45° steps up to 360° using tool-free pivoting cutting head. Standard accessoires: punch, die for corru-gated sheet, plastic carrying case. Batteries and charger not included.

Max. sheet thickness (steel 400N/mm²) 1.3 mmMax. sheet thickness (steel 600N/mm²) 0.8 mmMax. sheet thickness (alu 250N/mm²) 2.0 mmWorking speed 1.9 m/minMin. start hole Ø 19 mmSmallest radius (inside/outside) 15/20 mmBattery voltage 18 VStroke rate 1600 min-1


Max. sheet thickness (steel 400N/mm²) 1.3 mmMax. sheet thickness (steel 600N/mm²) 0.8 mmMax. sheet thickness (alu 250N/mm²) 2.0 mmWorking speed 1.9 m/minMin. start hole Ø 19 mmSmallest radius (inside/outside) 25/30 mmBattery voltage 18VStroke rate 1300 min-1


FEIN ABLK 1.3 TE Select Cordless Nibbler 18VCompact and curve-compatible nibbler for roof and façade con-struction, precise cuts in trapezoid sheet metal up to 1.3 mm, cuttingdirection setting can be changed in 45° steps up to 360° using tool-free pivoting cutting head. Standard accessoires: punch, die for tra-pezoid sheet, plastic carrying case. Batteries and charger notincluded.

Max. sheet thickness (steel 400N/mm²) 1.6 mmMax. sheet thickness (steel 600N/mm²) 1.0 mmMax. sheet thickness (alu 250N/mm²) 2.5 mmWorking speed 1.5 m/minMin. start hole Ø 22 mmSmallest radius (inside/outside) 30/35 mmBattery voltage 18VStroke rate 1300 min-1


FEIN ABLK 18 1.6 E Select Cordless Nibbler 18VCompact and curve-compatible nibbler for roof and façade con-struction, precise cuts in trapezoid and corrugated sheet metals andprofiles, rotating punch for a service life which is now up to 30 %longer. Standard accessoires: die holder for corrugated and trapezoidsheet, punch, die, plastic carrying case. Batteries and charger not included.



95



FEIN BLK 1.6 E NibblerFor metal sheets up to 1.6 mm thickness, stands out due to highestmanoeuvrability, flexibility and endurance; cuts all types of thin metalsheets, corrugated sheets, profiles and trapezoid sheet metals up to85 mm bead depth. Standard accessories: punch, die, die holder forsheet and corrugated sheet.

Max. sheet thickness (steel 400N/mm²) 1.6 mmMax. sheet thickness (steel 600N/mm²) 1.0 mmMax. sheet thickness (alu 250N/mm²) 2.5 mmWorking speed 1.9 m/minImmersion Ø with die 22 mmSmallest radius 30 mmPower consumption 350 WStroke rate 1500 min-1


Max. sheet thickness (steel 400N/mm²) 1.3 mmMax. sheet thickness (steel 600N/mm²) 0.8 mmMax. sheet thickness (alu 250N/mm²) 2.0 mmWorking speed 2.3 m/minMin. start hole Ø 19 mmSmallest radius (inside/outside) 15/20 mmPower consumption 350 WStroke rate 1800 min-1


Max. sheet thickness (steel 400N/mm²) 1.3 mmMax. sheet thickness (steel 600N/mm²) 0.8 mmMax. sheet thickness (alu 250N/mm²) 2.0 mmWorking speed 2.3 m/minMin. start hole Ø 19 mmSmallest radius (inside/outside) 25/30 mmPower consumption 350 WStroke rate 1800 min-1


FEIN BLK 1.3 CSE NibblerCompact and rapid nibbler for corrugated sheet metals, optimum ergo-nomics with a handle up to 20% slimmer because of its extremely thindrive head, cutting direction setting can be changed in 45° steps up to360° using tool-free pivoting cutting head. Standard accessoires: punch, die for corrugated sheet

FEIN BLK 1.3 TE NibblerCompact and rapid nibbler for trapezoid sheet metals, optimum ergo-nomics with a handle up to 20% slimmer because of its extremely thindrive head, cutting direction setting can be changed in 45° steps upto 360° using tool-free pivoting cutting head. Standard accessoires: punch, die for trapezoidal sheet





96



Bosch GNA 75-16 NibblerSlim, narrow design for optimum hold; powerful 750-watt motor forfast work progress, tool-less interchangeable cutting tools, tool-less rota-ting die for working corrugated sheet and trapezoidal sheet, sawdustejection downwards to clean surface.Standard accessoires: punch, die.

Max. sheet thickness (steel 400N/mm²) 1.6 mmMax. sheet thickness (steel 600N/mm²) 1.0 mmMax. sheet thickness (alu 200N/mm²) 2.0 mmSmallest radius 40 mmPower consumption 750 WStroke rate 2100 min-1


FEIN BLK 2.0 E NibblerCompact round punch nibbler with unlimited curve precision for cor-ners and edges, machine can turn on the spot, especially well-suitedfor cutting edged sheet metals with a minimum bend radius of 3 mm,QuickIN for rapid changeover of punch and die, cutting directionsetting can be changed in 45° steps up to 360° using tool-free pivot-ing cutting head. Standard accessories: punch, die.

Max. sheet thickness (steel 400N/mm²) 2.0 mmMax. sheet thickness (steel 600N/mm²) 1.5 mmMax. sheet thickness (alu 250N/mm²) 2.5 mmWorking speed 1.0 m/minImmersion Ø with die 18 mmSmallest radius 4 mmPower consumption 350 WStroke rate 1000 min-1


Bosch GNA 18V-16 Cordless Nibbler 5.0AhFor flexible cuts at job site, high productivity: comparable to 700Wcorded tool, 185mm grip circumference and perfect balance for easyhandling. Standard accessories: 2 batteries 5.0 Ah, quick chargerGAL 1880 CV, L-Boxx.

Max. sheet thickness (steel 400N/mm²) 1.6 mmMax. sheet thickness (steel 600N/mm²) 1.0 mmMax. sheet thickness (alu 250N/mm²) 2.0 mmSmallest radius 40 mmBattery voltage/capacity 18V/5.0AhStroke rate 1400 min-1





97



Bosch GNA 2.0 NibblerIdeal nibbler for metalworking trade, particularly suitable for contoursof all types, slim design, swivelling die, easy changeable cutting tool.Standard accessoires: punch, die, allen key, TORX angled screwdriverT20.

Max. sheet thickness (steel 400N/mm²) 2.0 mmMax. sheet thickness (steel 600N/mm²) 1.4 mmMax. sheet thickness (alu 200N/mm²) 2.5 mmSmallest radius 3 mmPower consumption 500 WStroke rate 2400 min-1


Makita JN1601J NibblerFor metal-, corrugated- and trapezium sheet; die holder rotates 360°,slim design, extra-long die enables cutting of trapezium sheets, easychange of grooved pin and die. Standard accessories: grooved pin(integrated), die (integrated), die holder (integrated), single-headwrench AF32, allen key 2.5, MAKPAC.

Max. sheet thickness (steel 400N/mm²) 1.6 mmMax. sheet thickness (steel 600N/mm²) 1.2 mmMax. sheet thickness (alu 200N/mm²) 2.5 mmImmersion Ø 22 mmSmallest radius 45 mmPower consumption 550 WStroke rate 2200 min-1


Makita DJN161RTJ Cordless Nibbler 18V 5.0AhFor metal-, corrugated- and trapezium sheet; die holder rotates 360°,slim design, extra-long die enables cutting of trapezium sheets, Anti-restart function for safety (with warning lamp). Standard accessories:2 batteries 5.0 Ah, charger DC18RC, allen key 2.5 mm, single headwrench, MAKPAC.

Max. sheet thickness (steel 400N/mm²) 1.6 mmMax. sheet thickness (steel 600N/mm²) 1.2 mmMax. sheet thickness (alu 200N/mm²) 2.5 mmMin. start hole Ø 22 mmSmallest radius 50 mmBattery voltage/capacity 18V/5.0AhStroke rate 1900 min-1






98



TRUMPF TruTool F 140 Seam LockerCloses Pittsburgh seams on straight and radius duct up to 1.4 mm sheetthickness, high performance on stainless steel applications, no refittingwhen processing formed or folded pieces, electronic speed controllerfor optimal working speed. Standard accessories: feeler ring roll (com-plete) 0.6 - 1 mm, distance plate, clipper device, TRUMPF Box.

Max. sheet thickness (steel 400N/mm²) 1.4 mmMax. sheet thickness (steel 600N/mm²) 0.6 mmEdge length 10-15 mmFlange height 13.0 mmClearance 2.5 mmWorking speed 6-10 m/minSmallest inner radius 300 mmSmallest outer radius 500 mmPower consumption 500 WWeight 4.2 kgItem No. 351400

TRUMPF TruTool F 125 Seam LockerFor closing prepared angle and standing seams; closes pre-formedstanding seams, even in corners and angles; spring-loaded hammerensures consistent quality with variations in sheet thickness, precisionadjustment of working distance between hammer and anvil. Standardaccessories: TRUMPF Box.

Max. sheet thickness (steel 400N/mm²) 1.25 mmMax. edge thickness 5.00 mmEdge length 40 mmWorking speed 5-6 m/minStroke rate 1850 min-1

Power consumption 500 WWeight 2.8 kgItem No. 351250

TRUMPF TruTool F 300 Cordless Seam Locker 18V 4.0AhTight seams in straight or curved ducts, closes Pittsburgh seams instraight or bent ducts in an independent roll-glide process, sheet thick-ness from 0.75 mm to 1.25 mm construction steel, infeed ensurescontinuous and tight seams, no need for conversion for processing ofshaped and curved pieces, automatic adaptation to sheet thickness,on-site assembly is possible. Standard accessories: 2 batteries 4.0Ah,charger 100-240V, universal oil, 2 allen keys, belt clip, TRUMPF Box.

Max. sheet thickness (steel 400N/mm²) 1.25 mmMin. sheet thickness (steel 400N/mm²) 0.75 mmFlange height 0.75-1mm 9-11 mmFlange height 1-1.25 mm 11-13 mm Working speed 4-7 m/minSmallest inner radius 150 mmSmallest outer radius 300 mmBattery voltage/capacity 18V/4.0AhWeight 6.0 kgItem No. 352013




99



TRUMPF TruTool F 300 Seam Locker 500 WTight seams in straight or curved ducts, closes Pittsburgh seams instraight or bent ducts in an independent roll-glide process, sheet thick-ness from 0.75 mm to 1.25 mm construction steel, infeed ensurescontinuous and tight seams, no need for conversion for processing ofshaped and curved pieces, automatic adaptation to sheet thickness,on-site assembly is possible. Standard accessories: ring bolt, hex headwrench DIN 911-4, hex head wrench 6 mm, form piece, universal oil150 ml, TRUMPF Box.

Max. sheet thickness (steel 400N/mm²) 1.25 mmMin. sheet thickness (steel 400N/mm²) 0.75 mmFlange height/sheet 0.75 - 1.0 mm 9-11 mm Flange height/sheet 1.0 - 1.25 mm 11-13 mm Working speed 4-7 m/minSmallest inner radius 150 mmSmallest outer radius 300 mmPower consumption 500 WWeight 5.4 kgItem No. 353000

TRUMPF TruTool F 300 Seam Locker 1400 WMore power and high operating speed, closes Pittsburgh seams instraight or bent ducts in an independent roll-glide process, sheet thick-ness ranges from 0.75 mm to 1.25 mm, integrated infeed ensurescontinuous and tight seaming, no need for conversion for processingof shaped and curved pieces, automatic adaptation to sheet thickness,on-site assembly is possible. Standard accessories: ring bolt, hex headwrench DIN 911-4, hex head wrench 6 mm, form piece, universal oil150 ml, TRUMPF Box.

Max. sheet thickness (steel 400N/mm²) 1.25 mmMin. sheet thickness (steel 400N/mm²) 0.75 mmFlange height/sheet 0.75 - 1.0 mm 11 mm Flange height/sheet 1.0 - 1.25 mm 11-13 mm Working speed 6.5-10.5 m/minSmallest inner radius 150 mmSmallest outer radius 300 mmPower consumption 1400 WWeight 6.2 kgItem No. 351009

TRUMPF TruTool F 301 Cordless Seam Locker 18V 4.0AhTight seams in straight or curved ducts, closes Pittsburgh seams instraight or bent ducts in an independent roll-glide process, sheet thick-ness from 0.45 mm to 1.00 mm construction steel, infeed ensurescontinuous and tight seams, no need for conversion for processing ofshaped and curved pieces, automatic adaptation to sheet thickness,on-site assembly is possible. Standard accessories: 2 batteries 4.0Ah,charger 100-240V, belt clip, TRUMPF Box.

Max. sheet thickness (steel 400N/mm²) 1.00 mmMin. sheet thickness (steel 400N/mm²) 0.45 mmFlange height 0.45-1.00 mm 8-11 mmWorking speed 4-7 m/minSmallest inner radius 150 mmSmallest outer radius 300 mmBattery voltage/capacity 18V/4.0AhWeight 5.9 kgItem No. 352014






100



TRUMPF TruTool F 301 Seam LockerTight seams in straight or curved ducts, closes Pittsburgh seams instraight or bent ducts in an independent roll-glide process, sheet thick-ness from 0.45 mm to 1.25 mm construction steel, infeed ensures con-tinuous and tight seams, no need for conversion for processing ofshaped and curved pieces, automatic adaptation to sheet thickness,on-site assembly is possible. Standard accessories: ring bolt, hex headwrench DIN 911-4, hex head wrench 6 mm, form piece, universal oil150 ml, TRUMPF Box.

Max. sheet thickness (steel 400N/mm²) 1.0 mmMin.sheet thickness (steel 400N/mm²) 0.45 mmFlange height/sheet 0.75 mm 7.5 mm Flange height/sheet 0.75 - 1.0 mm 8.0 mm Working speed 4-7 m/minSmallest inner radius 150 mmSmallest outer radius 300 mmPower consumption 500 WWeight 5.2 kgItem No. 353010

TRUMPF TruTool TF 350 Power FastenerJoins coated or uncoated workpieces, no need for pre- or post-proces-sing, no costs for fasteners like screws or rivets, rapid stroke rate: up totwo joining points per second, cuts and forms the connecting elementout of the working material in a cold forming process.Standard accessoires: punch (integrated), tilting arm for punch,die arm stationary no. 3 (incl. die), stripper for straight sheets, stripperfor ducts, 2 hex head wrenches, grease gun (filled with "G1"), tubegrease "G1".

Max. sheet thickness (steel 400N/mm²) 3.5 mmMin.sheet thickness (steel 400N/mm²) 0.8 mmMax. sheet thickness (steel 600N/mm²) 2.5 mmMax. sheet thickness (alu 250N/mm²) 4.0 mm Max. locking power 25 kNMax. stroke power 2 1/sMin. edge clearance 8 mmMax. edge clearance 58 mmMax. flange height 36 mmPower input 1400 WWeight 8.3 kgItem No. 353500

TRUMPF TruTool TF 350 Cordless Power Fastener 18V 4.0Ah Joins coated or uncoated workpieces, no need for pre- or post-proces-sing, no costs for fasteners like screws or rivets, rapid stroke rate: up totwo joining points per second, cuts and forms the connecting elementout of the working material in a cold forming process.Standard accessoires: 2 batteries 4.0Ah, charger 100-240V, punch(integrated), tilting arm for punch, die arm fixed No. 3 sheet thickness3.1 – 3.5, stripper for straight sheets (integrated), stripper for ducts,grease gun (filled with "G1"), 3 allen keys, belt clip, case.

Max. sheet thickness (steel 400N/mm²) 3.5 mmMin.sheet thickness (steel 400N/mm²) 0.8 mmMax. sheet thickness (steel 600N/mm²) 2.5 mmMax. sheet thickness (alu 250N/mm²) 4.0 mm Max. locking power 25 kNMax. stroke power 2 1/sMax. flange height 36 mmEdge clearance 8 - 58 mmBattery voltage/capacity 18V/4.0AhWeight 8.1 kgItem No. 352015



101



TRUMPF TruTool TPC 165 Panel Cutter Separates polyurethane and polyisocyanurate sandwich panels (flat,trapezoidal or corrugated), crosscuts and right-angle cuts to interiorcutouts and notches, cutouts on pre-mounted panels, 90° adjustableblade, start at any location on the panel without a starting drill hole.Standard accessories: blade 165 mm, saw chain 165 mm, wearplate and front wear plate (integrated), punch and nibble oil for steel,TRUMPF Box.

Max. panel thickness 165 mmMax. single sheet thicknessfor steel up to 400 N/mm² 0.9 mmWorking speed 4 m/minCutting width 4 mmSmallest aperture with cut-in 340 × 340 mmPower consumption 1400 WWeight without cable 9.6 kgItem No. 351006

Makita SP6000J1 Plunge Saw Circular saw with plunge function and tilt protection, with electronicadjustable speed, angle adjustment from -1° to 48° (indent function),with electronic feedback, soft start and overload protection.Standard accessories: saw blade, guide rail, MAKPAC.


Blade diameter 165 mmBore diameter 20 mmDepth of cut 0° 56 mm Depth of cut 45° 40 mmDepth of cut 48° 38 mmPower input 1300 WWeight 4.4 kgItem No. 309924

Makita DSP600ZJ Cordless Plunge Saw 2x18V(without batteries and charger)Automatic Torque Drive Technology: Automatically changes the cuttingspeed according to load condition for an optimum operation, depthstopper for splinter free cutting, bevels -1 to 48 degrees, positive stopfor bevel adjustment. Standard accessories: TCT saw blade, MAKPAC.


Blade diameter 165 mmBore diameter 20 mmDepth of cut 0° 56 mm Depth of cut 45° 40 mmDepth of cut 48° 38 mmBattery voltage 18 VWeight 5.1 kgItem No. 300237





102



Makita HS6101J1 Circular Hand SawLightweight and handy, ergonomic design with padded handles,quick-closing safety hood, easily adjustable cutting depth according tothe scissors principle, electronic motor brake, tilt adjustment up 50°,cooling air blows the interface free, with dual LED.Standard accessories: TCT saw blade 165 mm, assembly tool,adapter for guide rail, rip fence, dust nozzle, MAKPAC.

No-load speed 5500 min-1

Blade diameter 165 mmBore diameter 20 mm Depth of cut 0° 54.5 mmDepth of cut 45° 39.5 mmDepth of cut 50° 35.5 mmPower input 1100 WWeight 3.7 kgItem No. 300926

Makita 5903RK Circular Hand SawWith ergonomically shaped grip, lighter handling for universal applica-tion, with soft start and motor brake, robust table made of die-cast alu-minium for precise work, external vacuum extraction can beconnected, cutting depth adjustment according to the scissor principle,140 cm guide rail can be connected via adapter (special acces-sories), angle adjustment from 0° up to 45°. Standard accessories:rip fence, dust nozzle, TCT saw blade 235 mm, transport case.


Blade diameter 235 mmBore diameter 30 mmDepth of cut 0° 85 mm Depth of cut 45° 64 mmPower input 2000 WWeight 7.2 kgItem No. 305904

Makita DCS551RTJ Cordless Metal Saw 18V 5.0AhHandy machine for cutting profiles and solid metal, automaticallychanges the cutting speed according to load condition for optimumoperation, soft start feature, electric brake, brushless motor. Standard accessories: 2 batteries 5.0 Ah, charger, hex wrench 5 mm,safety goggles, TCT saw blade 150×20×32t, MAKPAC.


Blade diameter 150 mmBore diameter 20 mmDepth of cut 0° 57.5 mm Battery voltage 18 VBattery capacity 5.0 AhWeight 2.9 kgItem No. 306160



103



Makita DJV181RT1J Cordless Jigsaw 18V 5.0AhBrushless motor, improved dust extraction hose joint, rigid aluminiumbase bevels 0° - 45° left and right, change lever for 3 orbital settingsand straight cutting, tool-less blade change, variable speed controldial, soft start feature, "soft no load" function automatically reduces themotor speed during idling to suppress the vibration of the machinebody, blower function to clear wood dust from cutting line, twin LEDjob light. Standard accessoires: 1 battery 5.0 Ah, charger, hexwrench 4mm, anti splintering device, sliding plate, 3 blades, MAKPAC

No-load stroke rate 800-3500 min-1

Stroke height 26 mmPendulum stroke 3 orbital + straight cutCutting depth/wood 135 mm Cutting depth/steel 10 mmBattery voltage 18 VBattery capacity 5.0 AhWeight 2.5 kgItem No. 300170

Makita 4351FCTJ Pendulum Stroke JigsawPowerful and fast orbital jigsaw, with electronically adjustable strokes,toolless blade change with quick clamp, interface lighting through lumi-nous LED. Standard accessoires: blade set, sliding plate, anti-splinter-ing device, MAKPAC.

No-load stroke rate 800 - 2800 min-1

Stroke height 26 mmPendulum stroke 4 orbitalCutting depth/wood 135 mm Cutting depth/non-ferrous metal 20 mmCutting depth/steel 10 mm Power input 720 WWeight 2.5 kgItem No. 300111

Makita JV102DSMJ Cordless Jigsaw 10.8V 4.0AhChange lever for 3 orbital settings and straight cutting, bevel capacity0 - 45 degrees left/right, "soft no load" function automatically reducesthe motor speed during idling to suppress the vibration of the machinebody, tool-less blade change, lock on function, brushless motor.Standard accessoires: 2 batteries 5.0 Ah, charger, jigswa bladeB-10, glide shoe, hex wrench 3 mm, dust nozzle, MAKPAC.


Stroke height 23 mmPendulum stroke 3 orbital + straight cutCutting depth/wood 90 mm Cutting depth/steel 10 mmBattery voltage 10.8 VBattery capacity 4.0 AhWeight 1.9 kgItem No. 300928





104



Bosch GST 25 Metal JigsawShort stroke especially designed for metalworking provides exception-ally smooth running, better curve mobility and blade sparing working,SDS clamping system for tool-free blade changes.Standard accessoires: saw blade, carrying case.


Stroke height 24 mmCutting depth/wood 80 mm Cutting depth/alu 20 mmCutting depth/steel 15 mm Power consumption 670 WWeight 2.7 kgItem No. 340079


Stroke height 18 mmCutting depth/wood 70 mm Cutting depth/alu 3 mmCutting depth/steel 3 mm Battery voltage/capacity 12V/2.5AhWeight 1.5 kgItem No. 340119

Bosch GST 12V-70 Cordless Jigsaw 2.5AhOptimised design for comfortable sawing from below; 3-stage pendu-lum action for tear-free cuts, grip position is exceptionally close to thecutting line, thus allowing especially precise cutting.Standard accessoires: 2 batteries 2.5 Ah, GAL 1230 CV, anti-splinterguard, dust extraction set, glide shoe, 2 saw blades, L-Boxx.


Stroke height 23 mmCutting depth/wood 120 mm Cutting depth/alu 20 mmCutting depth/steel 8 mm Battery voltage/capacity 18V/5.0AhWeight 2,4 kgItem No. 341255

Bosch GST 18V-LI S Cordless Jigsaw 5.0AhCompact and powerful – in every position, small grip circumferenceenables optimum control when sawing, barrel grip for guiding the sawunder the workpiece, SDS saw blade changes with only one hand.Standard accessoires: 2 batteries 5.0 Ah, charger GAL 1880 CV,anti-splinter guard, 3 saw blades, L-Boxx.



105




Stroke height 13 mmCutting depth/wood 50 mmCutting depth/metal profile 50 mmBattery voltage/-capacity 18V/5.0AhWeight 1.5 kgItem No. 300221

Makita JR3050T Pendulum Stroke Reciprocal Saw

Makita JR3060T Pendulum Stroke Reciprocal Saw

Makita DJR183RT1J Reciprocating Saw 18V 5.0AhSingle LED job light with pre-glow function, shoe adjustment, tool-lessblade clamp for reciprocating saw blade, 2 switch levers with variablespeed control: trigger switch on tool handle & Paddle switch on toolbody to make operation easier at any grip position for versatile appli-cations by using either trigger, rubberized soft grip provides comforta-ble and sure grip. Standard accessoires: 1 battery 5.0Ah, charger,saw blade BIM 100/18, saw blade BIM 100/6, contact protectioncap, hex wrench 3mm, MAKPAC.

Tool-free blade change, infinitely variable speed for precise andcorrect saws, adjustable footplate to the optimal utilization of the sawblade, with elaborate protection against ingress of dust and waterspray, handle with inserted rubber pads. Standard accessoires: blade set, transport case.


Stroke height 28 mmPower consumption 1010 WWeight 3.3 kgItem No. 300186

Tool-free blade change, infinitely variable speed, adjustable footplate,with elaborate protection against ingress of dust and water spray,handle with inserted rubber pads, 4-way oscillating stroke adjustment,with sliding coupling. Standard accessoires: blade set, transport case.


Stroke height 32 mmPower consumption 1250 WWeight 4.4 kgItem No. 300128





106



Bosch GSA 1300 PCE Sabre SawFor low-fatigue working: anti-vibration handle and mass balance, high-performance motor with Constant Electronic, constant pendulum strokefor fast sawing progress, constant LED light for illuminating dark workareas, tool-free adjustable saw stop, SDS saw blade changing systemfor fast and convenient blade changes with one hand, rubber-coatedgear housing for a secure and comfortable grip.Standard accessoires: wood saw blade S 2345 X, metal saw bladeS 123 XF, carrying case.


Stroke length 28 mmCutting depth wood 23 mmCutting depth metal profile 20 mmPower input 1300 WWeight 4.1 kgItem No. 342179

Bosch GSA 12V-14 Cordless Sabre Saw 3.0AhThe smallest professional universal saw, perfect handling and versatileapplications in wood, metal and plastic; small grip circumference andlight weight, SDS system for fast and convenient saw blade changes.Standard accessoires: 2 batteries 3.0 Ah, quick charger GAL 1230CV, saw blade for metal S 522 EF, saw blade for wood and metal S511 DF, L-Boxx.


Stroke length 14.5 mmCutting depth wood 65 mmCutting depth metal profile 50 mmBattery voltage/-capacity 12 V/3.0 AhWeight 1.2 kgItem No. 340298

Bosch GSA 18V-32 Cordless Sabre Saw 5.0AhUnique ergonomic handle shape and extra long switch enables betterhandling for difficult overhead work or in tight spaces, brushless motor,lowest vibration, SDS for easy and safe saw blade changing, variablecutting speed, adjustable base plate for full use of the saw blade. Standard accessoires: 2 batteries 5.0Ah, charger GAL 1880 CV, sawblade for metal S 1130 CF, saw blade for wood+metal S 1156XHMl, L-Boxx.

Leerlaufhubzahl 0-2500 min-1

Hublängen 32 mmSchnitttiefe in Holz 230 mmSchnitttiefe in Metallprofilen 175 mmAkkuspannung/-kapazität 18V/5,0AhGewicht 4,1 kgArtikel-Nr. 341187



107



Makita DGA508RTJ Cordless Angle Grinder 18V 5.0AhSafety paddle switch, electronic current limiter for overload protection,soft start feature, anti-restart function, electric brake, battery fuel gauge,rubberised soft grip, Automatic Speed Control, high power motor, bat-tery protection circuit: designed to protect the battery from damagesdue to overdischarge, high temperature or overload current; Kickbackuser protection: Shuts down the tool to protect the user if rotationspeed suddenly slow down. Standard Accessoires: 2 batteries 5.0Ah,charger, lock nut wrench, grinding wheel, side handle, MAKPAC.


Disc Ø 125 mmBattery voltage 18 VBattery capacity 5.0AhWeight 2.3 kgItem No. 300157

Makita GA5030R Angle GrinderCase diameter only 57 mm, high-performance motor with particularlylong service life with great heat resistance, robust gear box for longservice life, high-end isolation increases life span motor and gear boxwith protection against dust and dirt, with spindle lock.Standard accessoires: protective cover, side grip, clamping flange,flange nut, face wrench.


Grinding spindle thread M14Disc Ø 125 mmPower consumption 720 WWeight 1.8 kgItem No. 309077

Makita DGA504RTJ Cordless Angle Grinder 18V 5.0AhVery easy to use angle grinder with 18V drive, brushless motor forlonger endurace, longer lifetime and more compact housing, restartlock-out prevents accidental start-up after battery replacement, LED sig-nals low battery voltage and overload, electronic overload protection,with soft start. Standard accessories: 2 batteries 5.0Ah, rapid chargerDC18RC, protective cover, clamping flange, flange nut, side grip,MAKPAC.


Disc Ø 125 mmBattery voltage 18 VBattery capacity 5.0 AhWeight 2.3 kgItem No. 309569





108



Bosch GWS 15-125 CIEP WinkelschleiferÜberragender Anwenderschutz: Der PROtection-Schalter schaltet dieMaschine unmittelbar nach Loslassen ab. 6-stufige Drehzahlvorwahl fürunterschiedliche Materialien, Vibration Control-Zusatzhandgriff mit 40% Vibrationsreduktion, Sanftanlauf und Anlaufstrombegrenzung.Mitgeliefertes Zubehör: Aufnahmeflansch, Schutzhaube, Zweiloch-schlüssel, Zusatzhandgriff Vibration Control.

Leerlaufdrehzahl 2800-11500 min-1

Scheibendurchmesser 125 mmSchleifspindelgewinde M14Leistungsaufnahme 1500 WGewicht 2,5 kgArtikel-Nr. 342207

Bosch GWS 12V-76 Cordless Angle Grinder 2.5AhThe most compact and ergonomic small angle grinder, best ergono-mics and compact size designed for fast cuts, versatile usage for abroad range of materials and applications on the jobsite, easy disc /tool change thanks to spindle lock, powerful EC motor for high pro-ductivity. Standard accessoires: 2 batteries 2.5Ah, charger GAL 1230CV, protective guard, 1 × carbide cutting disc, 2 × inox cutting disc76×10 mm, L-Boxx


Disc Ø 76 mmGrinding spindle thread M5Bore size Ø 10 mmBattery voltage 12VBattery capacity 2.5AhWeight 0.9 kgItem No. 350104

Bosch GWS 18-125 V-LI Cordless Angle Grinder 5.0AhHighest material removal rate and cutting performance in its class perbattery charge, extremely robust and durable 4-pole high-performancemotor for a long lifetime; compact design and low weight for comfor-table working, especially in tight spaces and overhead. Standard accessoires: 2 batteries 5.0Ah, charger GAL 1880 CV, pro-tective guard, extra handle, L-Boxx.


Disc Ø 125 mmBattery voltage 18 VBattery capacity 5.0AhWeight 2.3 kgItem No. 342125



109



FEIN WSG 8-125 Compact Angle GrinderErgonomic 800 W compact angle grinder for deburring, sanding andcutting; protective guard can be adjusted without tools and has ananti-twist protection, spindle lock. Standard accessories: Protectiveguard, pair of flanges, auxiliary handle, spanner.


Disc Ø 125 mmGrinding spindle thread M14Power input 1100 WWeight 2.2 kgItem No. 360109


Disc Ø 125 mmGrinding spindle thread M14Power input 800 WWeight 2.0 kgItem No. 360038

FEIN WSG 11-125 Compact Angle GrinderErgonomic 1100 W compact angle grinder for deburring, sandingand cutting; protective guard can be adjusted without tools and hasan anti-twist protection, spindle lock. Standard accessories: Protectiveguard, pair of flanges, auxiliary handle, spanner.

FEIN WSG 17-70 Inox Angler Grinder Starter-Set Stainless steel starter set for preparing to finish surfaces, pipes and pro-files. Variable speed, best vibration performance in its class, restartprotection, solid metal gearbox head for maximum robustness and ser-vice life, electronic overload protection, blockage monitoring, soft start.Standard accessories: serrated sanding disc medium Ø 125 mm, finis-hing disc Ø 125 mm, 5 each of Pyramix sanding sheet, perforated,diameter 115 mm (grit 280, 400, 800), 25 sanding sheets (grit 80,Ø 115 mm), cooling backing pad (Ø 75 mm, M14), supporting platewith velcro adhesion section (Ø 115 mm, M14), carrying case.


Disc Ø 125 mmGrinding spindle thread M14Power consumption 1700 WWeight 2.4 kgItem No. 360648





110



FEIN FMM 350 QSL MultiMaster QuickStartThe powerful and universal system for interior work and renovation withaccessories for a wide range of applications. QuickIN quick clampingsystem, StarlockPlus tool mounting with outstanding torque transfer,electronic speed setting with tachogenerator for constant speed evenwhen loaded. Standard accessoires: sanding pad, 3 sanding sheets(grit 60, 80, 120, 180), Universal E-Cut saw blade (44 mm), HSSsegment saw blade, fixed scraper, plastic carrying case.

FEIN FSC 500 QSL SuperCut Professional Setheating/sanitary installationThe most powerful system for interior work and renovation with specialaccessories for the key applications in sanitary repairs. Also ideal forall fitting work, minimal dirt and dust. Standard accessoires: segmentblade, diamond-coated (form 243), 1 of each cutting tool (12, 13and 22 mm), cutter blade, straight, long (form 239), 2 E-Cut universalsaw blades (form 151, 152), stopper knife, carbide-coated rasp (tri-angular, perforated for dust extraction), Systainer.

Oscillations 11000-18500 min-1

Sanding pad width 80 mmTool holder StarlockPlusTool change QuickINAmplitude 2 x 1.7 °Battery voltage/capacity 18V/2.5AhWeight 1.8 kgItem No. 360065


Sanding pad width 80 mmTool holder StarlockPlusTool change QuickINAmplitude 2 x 1.7 °Power consumption 350 WWeight 1.4 kgItem No. 360086


Tool holder StarlockMaxTool change QuickINPower consumption 450 WWeight 1.6 kgItem No. 360126

FEIN AFMM 18 QSL Cordless MultiMaster 18V 2.5AhThe high-performance, battery-powered universal system for interiorwork and renovation with QuickIN and accessories for a wide rangeof applications. StarlockPlus tool mounting, QuickIN clamping system.Standard accessoires: 2 batteries 2.5 Ah, charger ALG 50, sandingpad, 3 sanding sheets (grit 60, 80, 120, 180), fixed scraper, HSSsegment saw blade, E-Cut long-life saw blade (65 mm), Universal E-Cut saw blade (44 mm), plastic carrying case.



111



Makita VC2012L Wet/Dry ExtractorFor wet and dry operation, suitable for dusts with MAC >1 mg/m3

and dust class “L” according to Eurocode, Push&Clean filter cleaningsystem, robust stainless steel container with edge protection, appliancesocket and automatic switch-on for machines up to 1900 W, holderfor cable and accessoires. Standard accessoires: Suction hose, extraction pipe set, universal nozzle, crevice nozzle, accessoires box.

Makita VC1310LX1 Wet/Dry ExtractorFor wet and dry operation, adjustable suction force, self-cleaning3-stage filter system, robust stainless steel container with edge protec-tion, suitable for dusts with MAC >1 mg/m3 and dust class “L” accord-ing to Eurocode, appliance socket and automatic switch-on formachines up to 2000 W, holder for cable and accessoires.Standard accessories: AS hose 28 mm Ø 3.5 m, AS hose 38 mm Ø3.5 m, extension pipe, floor nozzle, crevice nozzle, hose holder,10 disposal bags, extraction adapter 22/24/38mm

Automatic filter cleaning system, suitable for dusts with MAC >1mg/m3 and dust class “M” according to Eurocode, Makpac casescan be attached to the unit with optional adapter plate; integratedhose, cable and accessory storage. Standard accessoires: 4.0m ×32mm hose, quick coupling adaptor, universal adaptor, fleece filterbag, disposal bag, extraction pipe set, floor nozzle.

Makita VC4210M Wet/Dry Extractor

Vacuum 220 mbarContainer volume 13 lDust class L


Max Airflow 3500 l/min.

Vacuum 210 mbarContainer volume 20 lDust class L



Vacuum 250 mbarContainer volume 42 lDust class M







112



Bosch GAS 35 L AFC Wet/Dry Extractor

Bosch GAS 20 L SFC Wet/Dry ExtractorMobile wet/dry dust extractor with semi-automatic filter cleaning, highsuction force due to powerful 1200 W suction turbine, certified safetydust extractor that meets dust class “L” to provide good user protection,tool socket for connecting power tools, automatic shutdown whenmax. fluid level is reached. Standard accessories: 2 extraction pipes0.5 m Ø 35 mm, dust extraction bag, pleated filter, crevice nozzle250 mm, coarse dirt nozzle, suction regulator control, universal powertool adapter, 3 m universal hose Ø 38 mm.

Dust class LContainer volume, gross 19 lContainer volume, net 15 lPower consumption 1200 WWeight 6.0 kgItem No. 340191

Max. volume flow rate (turbine) 62 l/sMax. vacuum pressure (turbine) 215 barFilter surface area 2800 cm2

Mobile wet/dry dust extractor with automatic filter cleaning, bestextraction results due to powerful 1200 W suction turbine, certifiedsafety dust extractor that meets dust class “L” to provide good userprotection, tool socket for connecting power tools with automaticon/off switching, automatic shutdown when max. fluid level isreached.Standard accessories: 5 m hose Ø 35 mm, 3 extraction pipes, floornozzle set, elbow, crevice nozzle, PES flat-pleated filter, disposal bag.

Bosch GAS 55 M AFC Wet/Dry ExtractorVersatile wet/dry dust extractor with automatic filter cleaning and largecontainer volume, certified safety dust extractor that meets dust class“M”, tool socket for connecting power tools with automatic on/offswitching, automatic shutdown when max. liquid level is reached.Standard accessories: anti-static 5 m hose Ø 35 mm with power tooladapter, 3 extraction pipes, floor nozzle set, antistatic elbow, crevicenozzle, PES flat-pleated filter, disposal bag.

Dust class LContainer volume, gross 35 lContainer volume, net 19 lPower consumption 1200 WWeight 13.3 kgItem No. 340209

Max. volume flow rate (turbine) 74 l/sMax. vacuum pressure (turbine) 215 barFilter surface area 6150 cm2

Dust class MContainer volume, gross 55 lContainer volume, net 40 lPower consumption 1200 WWeight 17.3 kgItem No. 341259

Max. volume flow rate (turbine) 74 l/sMax. vacuum pressure (turbine) .254 barFilter surface area 6150 cm2



113



Bosch GLM 40 Laser MeasureAll relevant functions in a compact design, distance measurement,area calculation, volume calculation – all intuitive to use; illuminated,three-line display maximises readability, memory function enables easyaccess to the last ten measurements, IP54.Standard accessoires: Protective bag, 2 × battery 1.5 V LR03 (AAA),manufacturer’s certificate.

Bosch GLM 50 C Laser MeasureThe smart solution for measuring and documenting, Quick and efficientdata transfer via Bluetooth®, easy handling with improved user inter-face and illuminated, rotating colour display; broad functionality inclu-ding stake-out function and 360° tilt sensor for easy anglemeasurements and levelling applications, IP54. Standard accessoires: Protective bag, manufacturer’s certificate.

Bosch GLM 100 C Laser MeasureDirect digital transfer of measuring results, fast and efficient data trans-fer via Bluetooth® and micro USB, Measuring Master App: Simple ex-change and smart documentation of measured values, create digitalfloor plans, import and edit existing floor plans, and export the result.IP54. Standard accessoires: charger, micro USB cable, protectivebag, manufacturer’s certificate.

Laser diode 635 nm, < 1 mW Laser class 2Weight 0.09 kgItem No. 340349

Measurement range 0.15 – 40 m Measurement accuracy, typical ± 1.5 mmMemory capacity (values) 10

Laser diode 635 nm, < 1 mWLaser class 2Weight 0.09 kgItem No. 340374

Measurement range 0.05 – 50 m Measurement accuracy, typical ± 1.5 mmMemory capacity (values) 30

Laser diode 635 nm, < 1 mWLaser class 2Weight 0.14 kgItem No. 340094

Measurement range 0.05 – 100 m Measurement accuracy, typical ± 1.5 mmMemory capacity (values) 50+1





114



Size of TFT display 3.5"

Bosch GTC 400 C Cordless Thermo Detector 12VVisualise temperature differences within seconds and document resultswith ease, easy location orientation of the measured values due to thebuilt-in camera which generates a visible image with an overlay of thethermal image, easy documentation and fast exchange of data usingthe Bosch Measuring Master app.Standard accessoires 1 battery 12V 1.5 Ah, charger GAL 1230 CV,hand strap, L-Boxx.

Bosch GIS 1000 C Cordless Thermo Detector 12VQuickly acclimatising sensor for precise measurement of room tempera-ture and relative humidity, straightforward user interface for intuitiveoperation, bright LED for better photos in difficult lighting conditions,Simple exchange and smart documentation of measured values thanksto Measuring Master app, Measured values can be transferred directlyon location to a smartphone via Bluetooth® and then sent by e-mail.Standard accessoires: 1 battery 1.5 Ah, charger AL 1130 CV, quick-start card, L-Boxx.

Bosch GIC 120 C Cordless Inspection Camera 12VConvenient inspection and documentation of hard-to-reach areas, the“Up is Up”™ function offers the user optimum orientation due to auto-matic rotation of the image, transfer images and videos directly via amicro USB cable or a micro SD card for documenting critical areas,bright LED for illuminating dark areas.Standard accessoires: 1 battery 1.5 Ah, charger AL 1130 CV, microUSB cable, 4GB MicroSD card, camera cable 120 cm Ø 8.5 mm,hook, magnet, mirror L-Boxx.

Size of IR sensor 160×120 pxNumber of measuring points 19200


Measurement range -10 °C to +400°C Measuring accuracy of IR ± 3°CFrame buffer (number of images) 500 (visual and thermal)

Resolution 0.1 °C

Optics 50:1Measuring accuracy relative humidity ± 2%


Measurement range -40 °C … +1000 °C Measuring accuracy of IR ± 1°CFrame buffer (number of images) >200

Weight 0.64 kg

Length of camera cable 120 cmNumber of LED lighting stages 3

Item No. 340754

Display size 3.5"Display resolution 320 × 240 pxDiameter of camera head 8.5 mm



115

Accessoires Power and Cordless Tools 4


Bosch GBA Battery Li-Ion 12VSuitable for GSC/GSR/GDR/GWI/GLI 12V

Bosch GBA Battery Li-Ion 18VSuitable for following Bosch types:GBH, GBL, GCB, GHO, GKM, GKS, GOP, GSA, GSB, GSR, GST,GWS 18V

Bosch GBA Battery Li-Ion 12VSuitable for GSC/GSR/GDR/GWI/GLI 12V

Set: 2 × battery + charger GAL 1230 CV

2.0 Ah 3400483.0 Ah 340399

Capacity Item No.2.0 Ah 3403093.0 Ah 340347

Starter-Set Item No.

4.0 Ah 341120

6.0 Ah 3501404.0 Ah (2×) 342118

6.0 Ah (2×) 340456

Capacity Item No.


1.5 Ah 3403952.0 Ah 3403963.0 Ah 3403774.0 Ah 3407785.0 Ah 3403986.0 Ah 340383

Capacity Item No.5.0 Ah 3407626.0 Ah 340223



7.0 Ah 350131


Bosch ProCORE Battery Li-Ion 18VThe high-power battery by Bosch Professional. 87% more power -thanks to a new cell generation, 100% compatible with all Bosch Pro-fessional 18 V tools & chargers, up to 135% longer lifetime comparedto an ordinary battery pack.

7.0 Ah 340384

Capacity Item No.





Bosch GAL 1230 CV ChargerFor Bosch batteries 12V

For Bosch Li-Ion batteries 14.4V + 18V

Bosch GAL 1880 CV Charger

For FEIN Li-Ion batteries 14.4V

FEIN ALG 50 Charger

116

Accessoires Power and Cordless Tools4


340307

Item No.

340345

Item No.

360343

Item No.

FEIN Battery Li-Ion 12VSuitable for following FEIN machines:ASCD 12-100/150, ASCM 12 Q(C), ABSU 12 C, AFMT 12 (Q)SL

2.5 Ah 360345

Capacity Item No.2.5 Ah 360344


Set: 2 × battery + charger ALG 50

FEIN Battery Li-Ion 18VSuitable for following FEIN machines:ABLK 18 1.3/1.6, ABOP 6/10/13-2, ABS 18 Q(C), ABSS 18 1.6E, AFMM 18 QSL, AFMT 12 QSL, AFSC 1.7 Q(C), AFSC 18QC/Q(C)SL, ASCM 18 QM, ASCS 6.3/18, ASCT 18 (M)

2.5 Ah 3603425.0 Ah 360341 5.0 Ah 363643

Capacity Item No.2.5 Ah 363642


Set: 2 × Akku + Ladegerät ALG 50



117



For GESIPA® AccuBird®, PowerBird® and FireBird®

GESIPA® Battery Li-Ion 14.4V 1.3Ah

GESIPA® Battery Li-Ion 18VFor GESIPA® AccuBird®, PowerBird® and FireBird®

GESIPA® Charger 14.4VFor GESIPA® AccuBird®, PowerBird® and FireBird®

GESIPA® Charger 18VFor GESIPA® AccuBird® Pro and PowerBird® Pro

1.3 Ah 5008242.6 Ah 500859

Capacity Item No.

2.1 Ah 500830

Capacity Item No.

500861

Item No.

500831

Item No.





118



Makita Battery Li-Ion 18VSuitable for all 14.4V Makita devices with sliding batteries (if theyhave a yellow contact plate or an embossed star). With charging level indicator.

Makita Battery Li-Ion 10.8VSuitable for following Makita types:DF031/032, DF331/332, HP331/332, TD110/111, TM30

1.5 Ah 3001773.0 Ah * 3002334.0 Ah 3000185.0 Ah 300082

Capacity Item No.

Makita Battery Li-Ion 14.4V Suitable for all 14.4V Makita devices with sliding batteries (if theyhave a yellow contact plate or an embossed star).

Makita Battery Li-Ion 10.8VSuitable for following Makita types:DF330DWE, DF030DWE, TD090DWE, ML 101

1.3 Ah 300241

Capacity Item No.

1.5 Ah 300461

4.0 Ah * 3000922.0 Ah * 306835

Capacity Item No.

* with charging level indicator

* with charging level indicator

4.0 Ah 306310


Set: 2 × battery + charger + MAKPAC

1.5 Ah 3095003.0 Ah 3002324.0 Ah 3040935.0 Ah 300117

Capacity Item No.3.0 Ah 3001434.0 Ah 3004675.0 Ah 300080


Set: 2 × battery + charger + MAKPAC





Makita DC10WA ChargerFor Makita batteries 7.2V - 10.8V

Makita DC1414 ChargerFor Makita batteries 7.2V, 9.6V, 12V and 14.4V up to 3.0Ah

Makita DC18RC ChargerFor Makita batteries 14.4V and 18V up to 6.0Ah

300242

Item No.

300182

Item No.

300231

Item No.

Makita DC10SA ChargerFor Makita sliding batteries 10,8V up to 4,0Ah

300046

Item No.

119





120



For TRUMPF batteries 10.8V 2.0 Ah and 4.0 Ah

TRUMPF Battery Li-Ion 10.8V

TRUMPF Charger 10.8V

Suitable for TRUMPF TruTool C 160, S 160, PN 130, DD 1010

2.0 Ah 3516734.0 Ah 351674

Capacity Item No.

TRUMPF Battery Li-Ion 18VSuitable for TRUMPF TruTool C 250, N 200, PN 200/201,F 300/301, TF 350

2.0 Ah 3520274.0 Ah 352028

Capacity Item No.

351675

Item No.

For TRUMPF batteries 18V 2.0 Ah and 4.0 Ah

TRUMPF Charger 18V

352029

Item No.



121



VVG RivSmart® Battery Li-Ion 12VLi-ion replacement battery RivdomPLUS for RivSmart cordless riveter.With optical charge level indicator.

VVG Rivdom® PLUS Charger220V quick charger for all RivdomPLUS batteries of the new generationof cordless riveting tools: RivSmart 12V, RivdomONE 16V, RivdomTWO 20V, Rivdom TWO 2.8 20V.Automatic identification of the used battery: All 12V, 16V and 20Vbatteries of the Rivdom family can be charged using the same charger.

2.0 Ah 5004354.0 Ah 500436

Capacity Item No.

VVG Rivdom® ONE Battery Li-Ion 16VLi-ion replacement battery RivdomPLUS for Rivdom® ONE cordless riveter.With optical charge level indicator.

2.0 Ah 5004334,0 Ah 500434

Capacity Item No.

VVG Rivdom® TWO Battery Li-Ion 20VLi-ion replacement battery RivdomPLUS for Rivdom® TWO cordless riveter.With optical charge level indicator.

2.0 Ah 5004274.0 Ah 500432

Capacity Item No.

500426

Item No.





122



Hundt Magnetic Bit Holder

7.0 mm 3550018.0 mm 355002

10.0 mm 355003

Size Item No.13.0 mm 3550201/4" 3550213/8" 355005

Size Item No.

7.0 mm 3550428.0 mm 355043

10.0 mm 3550443/8" 355046

Size Item No.

5.0 mm 3550545.5 mm 3550557.0 mm 3550538.0 mm 355056

10.0 mm 355057

Size Item No.13.0 mm 3550581/4" 3550595/16" 3550603/8" 3550611/2" 355062

Size Item No.

59 mm 356020

Length Item No.

88 mm 355050

Length Item No.

1/4" drive, form E6.3, for direct machine connection, strong perma-nent magnet fixes screw, solid one-hand setting, high transmission oftorque values, length 45 mm.

Hundt Bit Holder with Ball Locking DeviceFor non-magnetic screws, drive DIN1 3126 – E 6.3, stainless screwsare clamped and do not fall off the bit holder, long service life, no lossof spring, length 50 mm.



Hundt Magnetic Bit Holder with Spherical Head With a strong neodymium magnet and a circlip, ball joint allowsscrews to be tightened at an angle of up to 20° - even in areas whichare difficult to access, also usable as standard magnetic holder.



123



235 mm 358112

Length Item No.

PH1 × 25 mm 350320PH1 × 50 mm 350321PH2 × 25 mm 350225PH2 × 50 mm 350250PH3 × 25 mm 350325PH3 × 50 mm 350350

Size Item No.

5.5×1.0×25mm 3503246.5×1.2×25mm 3507258.0×1.2×25mm 3508258.0×1.6×25mm 350327

Size Item No.

0 × 25 mm 3503281 × 25 mm 3503292 × 25 mm 3502263 × 25 mm 350330

Size Item No.

Hundt Magnetic Bit Holder 125 mmFor bits with 1/4" drive, chrome-plated brass sleeve, with strong perma-nent magnet, burnished hexagon shaft, with ergonomic grip made ofspecial plastic, for external torque transmissions, blade length 125 mm.

Hundt Cross Slot Bit, shortDIN1 3128 form C6.3, 1/4" drive, made of chrome-moly-vanadium-steel, resistance to wear and tear for permanently industrial use.

Hundt Flat Blade Bit, shortDIN1 3127 Form C6.3, 1/4" drive, made of chrome-moly-vanadium-steel, resistance to wear and tear for permanently industrial use.

Hundt Square Drive Bit, shortDIN1 3127 Form C6.3, 1/4" drive, made of chrome-moly-vanadium-steel, resistance to wear and tear for permanently industrial use.






124



3.00mm 451300

3.20mm 4513203.10mm 451310

3.30mm 4513213.25mm 451325

3.50mm 4513503.40mm 451340

3.70mm 4513703.60mm 451360

Ø Item No.

3.20mm 4523203.25mm 4523253.30mm 452330

Ø Item No.

3.75mm 451375

4.00mm 4514003.80mm 451322

4.20mm 4514204.10mm 451323

4.80mm 4514804.50mm 451450

5.00mm 4513514.90mm 451490

Ø Item No.5.10mm 451510

5.30mm 4515305.20mm 451520

5.60mm 4515605.50mm 451550

5.80mm 4515805.70mm 451570

Ø Item No.

3.00 mm 4501123.20 mm 4501003.25 mm 4501013.30 mm 4501023.50 mm 4501033.80 mm 450113

Ø Item No.4.00 mm 4501044.10 mm 4501054.20 mm 4501145.20 mm 4501066.80 mm 4501179.50 mm 450115

Ø Item No.

6.0 mm 4500436.5 mm 450048

Ø Item No.7.0 mm 4500538.0 mm 450063

Ø Item No.9.0 mm 450073

10.0 mm 450083

Ø Item No.

Hundt HSS-GS Rivet Drill, extra short Similar DIN1 1897 Type N, right hand, with straight shank, blank,profile ground quality with split point, specially developed for use inhand drilling machines, for drilling thin materials such as: sheet metal,brass sheet, aluminium sheer, plastic sheet which are used for carbodies and metal works.

Hundt HSS-CO Twist Drills for stainless steelHigh speed steel (5 % cobalt), cylindrical, extra short version, righthand, Type N, point angle 135°, split point acc. DIN1 1412 C,copper coloured, for drilling of alloyed and non-alloyed steels andcastings with a tensile strength >800 N/mm2 - for example cold andhot rolled steels as well as rolling bearing steels.

Hundt HSS-CO Twist Drills High speed steel (5 % cobalt), cylindrical, extra short version, righthand, Type N, point angle 135°, split point acc. DIN1 1412 C,copper coloured, for drilling of alloyed and non-alloyed steels andcastings with a tensile strength >800 N/mm2 - for example cold andhot rolled steels as well as rolling bearing steels

Hundt HSS-GS Twist Drill DIN 338 With straight shank, short version, profile ground quality and brightfinish, with split point from 2 mm Ø, standard drill for drilling steel andcasting (alloyed and non-alloyed), grey cast iron, malleable cast iron,spheroidal graphite iron, sintered iron, german silver, graphite.



125



14 mm 45500215 mm 45501520 mm 45502030 mm 45503040 mm 455040

Ø Item No.

15 mm 455041

Ø Item No.

15 mm 455045

Ø Item No.

3 - 15 mm 455115

Ø Item No.

1 mm 4-12 mm

Steps Ø 455120

1 mm 12-20 mm 4551211 mm 20-30 mm 4551222 mm 4-12 mm 4551242 mm 4-20 mm 4551252 mm 4-30 mm 455126

Item No.

Hundt HSS Precision Conical Drill BitFor drilling bigger holes in thin materials like sheet metal, profiles,pipes. etc.; widening of existing holes without fasteners, drills thinnestsheet metals, operations free of vibrations and chattering, precise andclean round holes without burr, self-centering tip, unique shank designprevents slipping in drill chuck, max. sheet thickness: 2 mm.

Hundt HSS Precision Conical Drill Bit with backstopFor drilling of sheet metals and pipes, with backstop.

for stainless steel

Hundt HSS Precision Conical Drill Bit for stainless steelFor drilling of sheet metals and pipes of stainless steel, widening ofexisting holes without fasteners, drills thinnest sheet metals, operationsfree of vibrations and chattering, precise and clean round holes with-out burr, self-centering tip, unique shank design prevents slipping indrill chuck.

Hundt HSS Step DrillHigh-speed steel, cylindrical shank, right hand cutting, with split point,for drilling bigger holes in thin materials like sheet metal up to 2 mmthickness as well as non-ferrous metal up to 5 mm thickness.





126



further sizes on request

15.2 mm 4

Ø Teeth 335400

22.0 mm 5 33540922.5 mm 5 33541025.0 mm 5 33541327.0 mm 5 33541535.0 mm 6 33542440.0 mm 7 335429

Item No.50.0 mm 9

Ø Teeth 335439

65.0 mm 11 33545468.0 mm 12 33545775.0 mm 13 33546480.0 mm 14 335469

100.0 mm 17 335489150.0 mm 24 335499

Item No.

6 mm 110 mm 4530046 mm 160 mm 4530056 mm 210 mm 4530068 mm 160 mm 4530078 mm 210 mm 4530088 mm 260 mm 453009

10 mm 160 mm 45301010 mm 210 mm 453011

Ø Length Item No.10 mm 310 mm 45301210 mm 450 mm 45301312 mm 160 mm 45301412 mm 210 mm 45301512 mm 260 mm 45301612 mm 460 mm 45301712 mm 600 mm 453018

Ø Length Item No.

Hundt HSS Step DrillHigh-speed steel, cylindrical shank, right hand cutting, with split point,for drilling bigger holes in thin materials like sheet metal up to 2 mmthickness as well as non-ferrous metal up to 5 mm thickness.

ALFRA TCT Hole Saw, shortWith center drill, for drilling stainless steel up to 2 mm, non-alloyedsteels up tp 4 mm, plastics, PVC, aluminium, zinc, gypsum and light-weight panels; applicable in portable and pillar drilling machines,high-concentric running exactness, repeated re-grinding and toothreplacement possible, exchangeable center pin, quick removal ofdrilled core through ejector spring for all hole saws up to 150 mm Ø.

ALFRA TCT Hole Saw, longWith center drill, for drilling stainless steel up to 2 mm, non-alloyedsteels up tp 4 mm, non-ferrous metals, plastic as well as glass fibrereinforced plastic; applicable in portable and pillar drilling machines,high-concentric running exactness, repeated re-grinding and tooth re-placement possible, exchangeable center pin, tapered center drill withpre- and post-cutter centering without running off (center punching notnecessary).


20.0 mm 5

Ø Teeth 335500

22.0 mm 5 33550223.0 mm 5 33550325.0 mm 6 33550527.0 mm 6 33550735.0 mm 8 33551540.0 mm 10 335520

Item No.50.0 mm 12

Ø Teeth 335530

65.0 mm 14 33554568.0 mm 16 33554875.0 mm 16 33555580.0 mm 18 33556090.0 mm 20 335570

100.0 mm 22 335580

Item No.



127



Makita Circular StirrerDesigned for levelling compound, bitumen coating, dispersions, paint,primer, sludge, filler, pottant.For Makita types: 6013 BR, DA 6301, UT 120, UT 1200,UT 1400, UT 1600

15 - 30 kg 120 mm

Stirring quantity Ø590 mm

Length M14 350552

Shaft connection Item No.

Makita Spiral StirrerDesigned for construction adhesive, floor screed, ready-mixed mortar,tile cement, grout, adhesive mortar, plaster, material containing quartzsand, filler, thermal insulation plaster.For Makita types: 6013BR, DA6301, UT120, UT1200, UT1400,UT1600

10 - 15 kg 100 mm


Length M14 350554

15 - 30 kg 140 mm 590 mm M14 350555


Makita Mixing StirrerDesigned for dispersions, paint, gypsum lime mortar, plaster, sludge,thermal insulation plaster; downward mixing effect.For Makita types: DA6301, UT120, UT1200, UT1400, UT1600

15 - 25 kg 140 mm


Length M14 350557






128



TRUMPF CutterReplacement cutter (set of 2) suitable for shears TruTool S 130,S 160E, S 160, FEIN BLS 1.6 X, Bosch GSC 160, GSC 10.8 V;cutter standard for steel up to 400 N/mm2

cutter chrome steel for high-strength sheets up to 800 N/mm2

Punch HighSpeed for TRUMPF TruToolPN 130 Profile nibbler

Punch HighQuality for TRUMPF TruToolPN 130 Profile nibblerFor highest quality demands, extraordinary cutting quality, very fine cutedge, low feed = slightly reduced working speed (2.8 m / min).

345186

Item No.

Standard (set of 2) 346051Standard (set of 10) 345017

titanium coated 345021Chrome steel (set of 2) 346042

Version Item No.

1 piece 346038set of 5 345151set of 10 345076

Version Item No.

Universally applicable, very good cutting quality, very high workingspeed (3.2 m / min).

Tool-Set HighSpeed for TRUMPF TruToolPN 130 Profile nibblerSet consisting of 2 × punch HighSpeed, 1 × die holder

345108

Item No.



129



Punch/Die for TRUMPF TruTool N 200 NibblerSet consisting of 2 punches, 1 die, 1cover ring, 1 fixing bolt.

345024

Item No.

Punch/Die for TRUMPF TruTool Profile NibblerSuitable for PN 161, PN 200 and PN 201, set standard consistingof: 2 punches, 1 die, 2 wearing plates, fixing bolt.

345004

Item No.

FEIN Punch- and Die Set for Nibbler BLK 1.6Set consisting of 1 punch and 1 die.

FEIN Punch- and Die Set for Nibbler BLK 2.0Set consisting of 1 punch and 1 die.

360135

Item No.

360651

Item No.





130



Saw Chain for TRUMPF TruTool TPC 165 Panel CutterHigh cutting quality, tool life up to 300 m per chain.

165 mm 346126

Chain length Item No.

165 mm 346127


1400 mm 346131

Length Item No.

Blade for TRUMPF TruTool TPC 165 Panel CutterHigh cutting depth up to 165 mm, robust for long lifetime.

Guide Rail for TRUMPF TruTool TPC 165 Panel CutterIdeal for precise, straight cuts and simple machine guidance; severalguide rails can be connected, guide rail prevents scratching of metalsheat surface.

Guide Rail for Makita Plunge SawFor SP60000J1 and DSP600ZJ, with tilt protection.

1400 mm 350657

Length Item No.



131



165 mm 20 mm

Ø Bore10 350624

170 mm 30 mm 16 350627

185 mm 30 mm 16 350634

210 mm 30 mm 16 350638190 mm 30 mm 12 350635

180 mm 30 mm 16 350633

Teeth Item No.

150 mm 20 mm

Ø Bore24 350643

160 mm 20 mm 16 350645165 mm 20 mm 10 306096

180 mm 30 mm 24 350605190 mm 30 mm 12 350607

170 mm 30 mm 16 350601

Teeth Item No.

235 mm 30 mm

Ø Bore50 306916

Teeth Item No.

270 mm 30 mm 60 308406355 mm 30 mm


80 302017

Makita HM Saw Blade for SP60000J1 Plunge SawSuitable for wood and plywood, 48 teeth.

Makita TCT Saw Blade MFORCEfor Circular Hand SawsLarger wear surface, more cutting edges, lower tooth strength reducesfriction for easier feed and motor care.

Makita TCT Saw Blade MAKFORCEfor Circular Hand SawsFully hardened and aligned precisely,top-class HM cutting with low wear for long lifetime.

Makita Saw Blade Special Sandwich Panelfor Circular Hand SawsCold cut saw blade for clean unseaming of sandwich panels.

165 mm 20 mm

Ø Bore48 306096

Teeth Item No.





132



Makita Jigsaw Blade B-15With universal shaft suitable for: Makita, AEG, BOSCH, DeWalt,Holzher, Metabo, Flex and Festool.Straight set toothing, rough cuts, ideal for cutting of thin material.Packing unit: 5 pieces

3 - 35 mm 3 - 35 mm

Plastic Wood12

Teeth/" 50 mm 350702

Teeth length Item No.

Makita Jigsaw Blade B-25With universal shaft suitable for Makita, AEG, BOSCH, DeWalt,Holzher, Metabo, Flex and Festool.Straight set toothing, rough cuts, usage of coolant required.Packing unit: 5 pieces

3 - 60 mm 3 - 60 mm

Plastic Wood9

Teeth/" 74 mm 350697


Makita Reciprocal Saw Blade HMWith universal shaft suitable for Makita, BOSCH, B & D, Rockwell,Skil, Hitachi and Flex.Straight set toothing, rough cuts, for aerated concrete, hardwood andGRP materials.Packing unit: 5 pieces

Makita Reciprocal Saw Blade Bi-MetalWith universal shaft suitable for Makita, BOSCH, B & D, Rockwell,Skil, Hitachi and Flex.For steel und non-ferrous metals from 1.2 – 3 mm thicknessPacking unit: 5 pieces

6 - 40 mm 6

Wood Teeth/"70 mm 350688


1.2 - 3 mm 24

Soft steel Teeth/"180 mm 350677




133



PFERD POLICLEAN® Disc Rough textured, abrasive cleaning pad for removing rust, corrosionresidues, scale, dirt, persistently adherent colors and adhesives, oldcoatings and sealing residues; for cleaning surfaces of different struc-ture, leaves no corrosive residue on the workpiece surface.

125 mm 351049

Ø Item No.

Hundt Cutting Disc 1 mmFor cutting of sheet metals, profile- and full material of stainless steel,1 mm thick.

115 mm 350332125 mm 350333

Ø Item No.

Hundt Cutting Disc 2.5 mmCold pressed for metal, reinforced with fabric, with DSA-accreditation,2.5 mm thick.

115 mm 350490125 mm 350940230 mm 350941

Ø Item No.

PFERD Cutting Disc PSF-INOX EHTFor cutting sheet metal, profiled and solid stainless steel,1 mm thick.

115 mm 350144125 mm 350145

Ø Item No.





135

Welding Equipment 5


Telwin Inverter Welding Machine 216 HDCompact and light MMA and TIG inverter, electrode welding machinein direct current (DC) with scratch striking, use with a wide range ofelectrodes: rutile, basic, stainless steel, cast iron, etc.Standard accessoires: cable 25 MMQ 3 M dinse DX 25, cable 25MMQ 2 M dinse 253 m - 25 mm2, work clamp, electrode holder300A, aluminium carrying case.

Current range/DC 5 - 180A/DCMax. current/30%ED 180A/DC


Mains frequency 50 - 60HzMains voltage/single-phase 230 VMax. absorbed power 8 kW

Electrodes/DC 1.6 - 4 mm

Telwin Spot-Welding Machine Digital Modular 230Portable, single-phase microprocessor controlled spot-welding gun,suitable for spot-welding of sheets up to 2-2 mm thickness, automaticregulation of the spot welding current and time according to thematerial thickness. Standard accessories: electrode centring point andpointer 10 mm

Telwin Inverter Technology 186 HDPortable, single-phase MMA and TIG inverter, fan cooled electrodewelding machine in direct current (DC) with scratch striking, use witha wide range of electrodes: rutile, basic, stainless steel, cast iron, etc.Standard accessories: ground cable 3 m - 25 mm2, welding cable3 m - 25 mm2, CEE plug 220 - 240 V 3-pole16 A

Max. spot electricity 6300 AMax. welding strength / 2 sheets 2 + 2 mmWeight 10.3 kgItem No. 380100


Current range/DC 5 - 160A/DCMax. current/35%ED 160 A/DC



Electrodes/DC 1.6 - 4 mm



136

Welding Equipment5


Bohl GS 100 accu+ Welding Equipment for Clip PinsWelder can be operated either in mains or battery operation (no risktriggering mains fuses), battery can be charged through the unit, highsecurity and construction site suitability, optimal welding results, usingthe latest inverter technology results in a welding sequence of 15-20studs per minute, lower voltage in areas of increased hazard of electricshock as well as spill-resistant arrangement of the vents.Standard accessories: stud welding gun PCP 45-3 for cupped headpins, magnetic chuck, ground cable 5 m, 1 battery.

Schöler+Bolte Stud Welding Unit ISOFIX SetSpecially designed for welding cupped head pins and insulation nails,very light and compact, extremely short charging times and quickwelding sequences due to electronically clocked inverter chargingboard, all functions indicated by clearly arranged LED, continuouslyadjustable charging voltage. Standard accessoires: stud welding gunPIM-1B, ground cable 25 mm² 5 m, grip pliers, magnetic stud holderTSM311 for cupped head pins (Ø 30 mm).


Welding sequence > 30 welds/min

damage on welding/control cableMains supply 230 V (115 V), 63 A, 50/60 Hz

Dimensions (W × L × H) 195 × 302 × 270 mmWeight 7 kgItem No. 380303

Protection IP 21


Battery capacity ca. 400 studsBattery voltage 25.2 V

Welding range Clip-Pin-studs 2.7 mm ØInstallation speed 15 -20 studs/minMains supply 100 V - 230 V 50/60 Hz 10 ATWeight 12 kg (stable steel housing)Item No. 380600

Schöler+Bolte Stud Welding Unit ISOFIX accuSpecially designed for welding cupped head pins and insulation nails,the battery operation enables mobile use without electrical power sup-ply, extremely short charging times and quick welding sequences dueto electronically clocked inverter charging board, all functions indica-ted by clearly arranged LED, continuously adjustable charging voltage.Standard accessoires: 1 battery, charger, stud welding gun PIM-1B,ground cable 25 mm² 5 m, grip pliers, magnetic stud holder TSM311for cupped head pins (Ø 30 mm).


Welding sequence > 20 welds / min

damage on welding/control cableBattery capacity up to 1500 welds

Dimensions (W × L × H) 195 × 302 × 270 mmWeight 9 kgItem No. 380304

External power adapter 100-240 V, 50/60 Hz, 4000 mA






138

Power Distribution / Lighting6


Hundt Thermoplastic Cable Reel H07RN-FDrum made of unbreakable thermoplastic material, stable zinc-coatedfoot frame that is shock absorbent, drum brake to avoid unreeling,ergonomic handle, overheating protection by thermal switch, 3 socketoutlets 2PE 16 A/230 V, shock and splash proof, appropriate forconstruction sites and industrial use.

Hundt Metal Cable Reel H07RN-F

Hundt Professional Metal Cable Reel H07RN-F

25 m 285 mm33 m 285 mm40 m 285 mm

Cable length ØH07RN-F 3G1.5 230014H07RN-F 3G2.5 230016H07RN-F 3G1.5 230015

Cable type Item No.

Hot-dip galvanised steel, with insulating layer, “IronCoat”; shock-ab-sorbing, robust, zinc-coated pedestal; locking brake, ergonomicalshaped handle, VDE1- thermal circuit breaker and 3 shock-proof sock-ets with safe hinged lid and hammer symbol, suitable for job-sites, withpatented cable guide, tested by the DGUV2, conform with BGI3 608.

Drum made of hot-dipped galvanized steel, very strong, shock ab-sorbent, plastic-coated double tubular frame, coated with insulatinglayer “IronCoat”, ergonomic handle, big tightening knob to block thedrum, overheating protection by thermal switch, 3 socket outlets 2PE16 A / 230 V, with safety hinged cover and hammer symbol, testedby the DGUV2, conform with BGI3 608.

1 VDE German Electrical Engineering Association2 DGUV German Social Accident Insurance3 BGI Guide to Workers' Health and Safety

25 m 230 mm33 m 285 mm40 m 285 mm

Cable length ØH07RN-F 3G1.5 230003H07RN-F 3G2.5 230005

50 m 320 mm H07RN-F 3G1.5 230195H07RN-F 3G1.5 230004

Cable type Item No.

33 m 320 mm40 m 285 mm50 m 320 mm

Cable length ØH07RN-F 3G2.5 230019H07RN-F 3G1.5 230018H07RN-F 3G1.5 231010

Cable type Item No.



139

Power Distribution / Lighting 6


Energieverteilung/Beleuchtung

Hundt Metal Cable Reel H05RR-FStable zinc-coated foot frame that is shock absorbent, and a drumbrake to avoid unreeling, ergonomic handle, VDE overheating protec-tion by thermal switch and 4 safety socket outlets, rotatable windinggrip, for indoor use.

Hundt 3-way Shockproof Socket Outlet 230VHeavy, solid-rubber design, suspension lug, hinged, self-lockingsafety lids .

Hundt Neoprene Rubber Extension Cable 230VWith 2 pole + earth plug and connector with a safety lid, splash-proof.

50 m 285 mm

Cable length ØH05RR-F 3G1.5 231000

Cable type Item No.

0.3 m

Cable lengthH07RN-F 3G1.5 230031

4.5 m H07RN-F 3G1.5 2300325.0m H07RN-F 3G2.5 230037

10 m H07RN-F 3G2.5 23003810 m H07RN-F 3G1.5 230033

25 m H07RN-F 3G1.5 230034

Cable type Item No.

10 m


10 m H07RN-F 3G2.5 23004525 m H07RN-F 3G1.5 230043

50 m H07RN-F 3G1.5 23004425 m H07RN-F 3G2.5 230040

50 m H07RN-F 3G2.5 230046

Cable type Item No.





140



Hundt CEE Power Extension 400V 16AHeavy rubber sheath cable, approved for use at construction sites andfarms, high-grade CEE plug and connector of the latest generation.

Hundt CEE Power Extension 400V 32A Heavy rubber sheath cable, approved for use at construction sites andfarms, high-grade CEE plug and connector of the latest generation.

Hundt CEE Power Extension 400V 63A Heavy rubber sheath cable, approved for use at construction sites andfarms, high-grade CEE plug and connector of the latest generation.

10 m

Cable lengthH07RN-F 5G10 230151

25 m H07RN-F 5G10 23015250 m H07RN-F 5G10 23015310 m H07RN-F 5G16 23015425 m H07RN-F 5G16 23015550 m H07RN-F 5G16 230156

Cable type Item No.

Further cable lengths and other conductor cross-sections on request.

10 m


10 m H07RN-F 5G2.5 23000925 m H07RN-F 5G1.5 230050

50 m H07RN-F 5G1.5 23017725 m H07RN-F 5G2.5 230051

50 m H07RN-F 5G2.5 230178

Cable type Artikel-Nr.

10 m

Cable lengthH07RN-F 5G4 230090

10 m H07RN-F 5G6 23016025 m H07RN-F 5G4 23005425 m H07RN-F 5G6 230161

50 m H07RN-F 5G6 23016250 m H07RN-F 5G4 230055

Cable type Artikel-Nr.



141



Hundt CEE Combination Unit STECKY 1 400V 16AHousing made of special plastic highly resistant to breakage, withcable winder and carrying handle made of powder-coated metal.Input: CEE plug (16 A, 5-pole), Output: 4 socket outlets (230 V) withhinged safety lids, 2 CEE sockets (400 V, 16 A, 5-pole) with hingedsafety lids.

2 m


Cable type Item No.

Hundt CEE Combination Unit STECKY 2 400V 32ACable winder and carrying handle made of powder-coated metal. Input: CEE plug (32 A, 5-pole). Output: 4 socket outlets (230 V) withhinged safety lids, 1 CEE socket (400V, 16 A, 5-pole) with hingedsafety lids, 1 CEE socket (400 V, 32 A, 5-pole) with hinged safetylids. Protection: 1 × 3-pole MCB-C 16 A, 2 × 1-pole MCB-C 16 A.

Hundt CEE Combination Unit STECKY 3 400V 32AWith a residual-current circuit breaker (40 A, 30 mA) and automaticfuses, cable winder and carrying handle made of powder-coatedmetal.Input: CEE plug (32 A, 5-pole). Output: 4 socket outlets (230 V) withhinged safety lids, 1 CEE socket (400 V, 16 A, 5-pole) and 1 CEEsocket (400 V, 32 A, 5-pole) with a hinged safety lid.Protection: 1 × 3-pole MCB-C 16 A C, 2 × 1-pole MCB-C 16 A,1 × RCB (40 A, 30 mA).

4 m


Cable type Item No.

4 m


Cable type Item No.





142



Hundt CEE Power Distribution Module M1 400V 16AStackable and extremely space-saving, a closed housing substructurewith a ground clearance of 77 mm prevents water ingress, easy inter-change of attachable sockets, housing lid with quick-release, stainless-steel closure, contact-protected according to BGV A21 - also with thelid open.Input: CEE 400 V, 16 A, 5-pole. Output: 4 × shock-proof socket,2 × CEE-sockets 400 V, 16 A, 5-pole. Protection: 1 × RCB, tested according to EN 61242, DIN2 VDE3 0620-1, IEC 60309.

Hundt CEE Power Distribution Module M2 400V 32A

Hundt CEE Power Distribution Module M6 400V 63A

IP44 230181

Protection Item No.

Stackable and extremely space-saving, a closed housing substructurewith a ground clearance of 77 mm prevents water ingress, easy inter-change of attachable sockets, housing lid with quick-release, stainless-steel closure, contact-protected according to BGV A2 - also with the lidopen.Input: CEE 400 V, 32 A, 5-pole, plug with 2 m H07RN-F 5G4,heavy rubber cable. Output: 4 shock-proof socket 230 V, 16 A,2 × CEE-sockets 400 V, 16 A, 5-pole, 1 × CEE-socket 400 V, 32 A,5-pole. Protection: 2 MCB-C 16 A 1-pole, 2 MCB-C 16 A 3-pole,tested according to EN 61242, DIN2 VDE3 0620-1, IEC 60309.

IP44 230182

Protection Item No.

Stackable and extremely space-saving, a closed housing substructurewith a ground clearance of 77 mm prevents water ingress, easy inter-change of attachable sockets, housing lid with quick-release, stainless-steel closure, contact-protected according to BGV A2 - also with the lidopen. Input: CEE 400 V, 63 A, 5-pole, plug with 2m H07RN-F6G16, heavy rubber cable. Output: 3 shock-proof sockets 230 V, 16A, 3 × CEE-sockets 400 V, 16 A, 5-pole, 3 × CEE-sockets 400 V 32A, 5-pole. Protection: 1 RCB 63 A, 3 MCB-C 32 A 3-pole, 3 MCB-C16 A 3-pole, 2 MCB-C 16 A 1-pole, tested according to EN 61242,DIN2 VDE3 0620-1, IEC 60309.

IP44 230213

Protection Item No.

1 BGV A2 Accident prevention regulation for electrical installations and operating materialby the German Institutions for statutory accident insurance and prevention

2 DIN German Institute for Standardization3 VDE German Electrical Engineering Association

Combination units for construction-sites with an all-current sensitiveFI circuit breaker on request.



143



Hundt Battery LED Spotlight „Acculine”, foldable Original SAMSUNG-SMD- LED.Perfect for mobile use. Reinforced aluminium die-cast case with integra-ted carrying handle. Foldable stand for stability on all surfaces. Splash-proofed on / off switch. With strong magnets on the back side formounting on ladders, scaffolds and metalic surfaces. With removableLithium-ion battery. USB-output (5V, 1A) for charging Smartphones orMP3-player. IP54: For outside use.

Die-cast, light-metal housing, reflector made of hammered, ultra-purealuminium sheet, polished and anodized, safety tempered glass,silicone-rubber seal, R7s lamp socket with insulated, heat-resistant feedlines, black connection box with terminal strip, adjustable mountingbracket made of steel, Polyester powder coat, black, dust-proof,including a bulb 400 W, IP65.

Hundt Construction Site Halogen Floodlight 400W

4.5 m


Cable type Item No.

Hundt Mobile Light 400WHalogen floodlight, die-cast aluminium housing with adjustmentbracket, including bulb, protective grid, IP44.

2 m


Cable type Item No.

Power Color Light Operating Charging Item. no.temp. intensity time time

10 W 4000 K 700 lumen ca. 3 h ca. 4 h 230275

50 W 4000 K 3500 lumen ca. 3 h ca. 4 h 23027720 W 4000 K 1300 lumen ca. 3 h ca. 4 h 230276





144



Hundt Multi-Purpose Lamp „Spectra”

Suitable for continuous outdoor operation; very robust, solid-rubberseal for optimum all-round protection; 1 shock-proof sockets16A/230V with self-closing, hinged, safety lid; foldable hook for car-rying and suspension, low-glare illumination, an impact-resistant coverguarantees maximum light transmission, including an energy-savingbulb, 1.8 m H07RN-F 3G1.5 rubber supply cable and shock-proofplug, at an average illumination period of 5 hours/workday this lampsaves about 35 € / year

Hundt Energy-Saving Lamp „Power-Tech 190”

suitable for use in tough conditions on construction sites, even lightwith wide dispersion, glare-free, suitable for work; more than 5 timesthe light output of light bulbs (about 11500 lm), shock and impact-re-sistant casing with circumferential rubber edge; large adjustable bra-cket for suspension, carrying or setting up; with 5 m H07RN-F 3G1.5cable and safety plug; suitable for mounting on a stand

Protection Light color Brightness Consumption Item-No.IP44 6400 K 5900 Lumen 72 W 230104

Makita DML805 Cordless LED WorklightCan be powered by both AC and DC (14.4V/18V Li-ion battery), 20 white-light LEDs 0.5W deliver bright and even light, 360°verticallight angle adjustment, carrying handle for easy transport that also ser-ves as a hanging hook, 2 brightness levels, battery capacity warninglamp, tripod GM00001381 available as optional accessoire.

runtime Luminosity Item No.510 min at 18V 5.0Ah 750 lx 300158

Protection Light color Brightness Consumption Item No.IP44 6400 K 2700 Lumen 38 W 230203





146

Construction Site Equipment7


Hundt Tool BoxMade of steel sheet, expertly worked, rugged design.

Dimensions530×200×200mm600×200×200mm

Weight5.2 kg5.9 kg

Item No.210530210600

5-parted, reinforced design

Dimensions430×200×150 mm530×200×150 mm

Weight3.6 kg4.0 kg

Item No.210550210560

3-parted, reinforced design

Hundt Tool Box, steelSolid and weatherproof, lined with hard fibre boards,removable insert for small parts, compartment in the lid,wide handles and fittings for padlocking.

Dimensions690×360×310 mm830×440×340 mm910×530×430 mm

Weight15 kg20 kg25 kg

Item No.210700210830210910

ZARGES Box AluminiumLight and handy, stackable, with 3 handles.

Dimensions550×350×220 mm550×350×310 mm750×350×310 mm 850×450×350 mm

Weight5.0 kg6.1 kg7.1 kg9.1 kg

Item No.211000210009210010210011



147

Construction Site Equipment 7


Hundt Solid Brass PadlockWith 3 keys, hardened steel shackle.

ABUS Padlock 234Solid steel lock with levers and swinging shackle, chain to fix the lock,key is needed for locking.

ABUS Padlock 85To secure valuables/goods of greater value or at a high risk of theft,lock body made from solid brass, inner components made from rustfreehigh quality materials, double bolted, hardened shackle, precision pincylinder with mushroom pins, paracentric keyway for increased protec-tion against manipulation, locking without key.

BURG-WÄCHTER Padlock 222 C-LineSolid brass body, hardened steel shackle, double bolted, solid quality

30 mm 21102235 mm 21102340 mm 21102445 mm 21100350 mm 21102560 mm 211026

Size Item No.

40 mm 21100250 mm 211004

Size Item No.

30 mm 21101840 mm 21101950 mm 21100160 mm 21102070 mm 211021

Size Item No.

30 mm 21101440 mm 211015

60 mm 21101750 mm 211016

Size Item No.





148

Construction Site Equipment7


Hundt Hand Truck with platformMade of welded sectional steel, platform of anti-slipping, waterproofplywood, with automatic braking system effective on the front wheels,wheels with solid rubber.

Hundt Hand Truck with boardsHand truck with boards, 3-sides tilting, front end fixed, powder-coated,platform of anti-slipping, waterproof plywood, with automatic brakingsystem effective on the front wheels, wheels with solid rubber.

Hundt Bale CarRobust and well-tried tubular steel frames, powder-coated, pneumatictyres mounted on roller bearings, centre of gravity on axis in the ladencondition makes it easier to manoeuvre the car with heavy load.

1200 × 800 mm 1000 kg 2000 × 1000 mm 1250 kg

Platform size Capacity 480 mm 207010480 mm 207020

Loading height Item No.

1200×800 mm 700 kg

Platform size Capacity 430 mm 207012

1600×800 mm 1250 kg 500 mm 2070161200×800 mm 1250 kg 500 mm 207014

2000×1000 mm 1250 kg 500 mm 207022

Loading height Item No.

1500×650 mm 400 kg


2650×850 mm 600 kg 400 mm 2070522400×650 mm 500 kg 400 mm 207051

Wheel Ø Item No.



149

Construction Site Equipment 7


Hundt Open Cart with push handleTubular steel and profile steel welded, powder-coated, surface durablyprotected, resistant to impact and scratches, platform made of derivedtimber material boards, surface beech grain, 2 swivel and 2 fixed-wheel castors, TPE tyres, hubs with groove ball bearing, swivel castorswith wheel locks, according to the European Standard EN 1757-3.

Hundt Pallet Truck, steering wheels with solid rubber Frames and forks of steel construction, finished powder-coated distinctyellow, hand hydraulic pump with service-free bearing, low mainte-nance, strong steel handle with counter bearing for pushing operation,powder-coated black operating lever for lifting, moving, lowering;steering lock 2 × 100, locating wheels at fork tips.

85 - 200 mm 2500 kg

Lifting range Capacity1150 mm 207047

Fork length Item No.

Hundt Pallet Truck, steering wheels of Nylon Frames and forks of steel construction, finished powder-coated distinctyellow, hand hydraulic pump with service-free bearing, low mainte-nance, strong steel handle with counter bearing for pushing operation,powder-coated black operating lever for lifting, moving, lowering;steering lock 2 × 100, locating wheels at fork tips.

85 - 200mm 2500 kg

Lifting range Capacity1150 mm 207030

Fork length Item No.

850×500 mm 400 kg


1000×700 mm 500 kg 200 mm 2070371000×600 mm 500 kg 200 mm 207036

1200×800 mm 500 kg 200 mm 207038

Wheel Ø Item No.






7

150

Construction Site Equipment

Hundt Load-Carrying NetLoad-carrying net for for helicopters, for approx. 1 t payload, made ofhigh tenacity Polypropylen, approx. 5 mm Ø, mesh width 60 mm, with14 mm nylon peripheral rope and 4 loops with scuff protection on thecorners, colour: green.

Hundt Mortar BucketWith ergonomically shaped recessed grip and special edge reinforcement.

Hundt Hemp Rope and Building Draw PulleyRope Ø 16 mm, one rope end smooth, one rope end with snap hook,building draw pulley Ø 160 mm, heavy version with cast steel rollerand pivotable load hook, load capacity 250 kg.

Hundt Contractors‘ BucketExtremely stable plastic, with handle.

12 l 290000

Capacity Item No.

20 m 29003625 m 29003830 m 29004540 m 29003750 m 290042

Rope length Item No.160 mm 290046

Roll Ø Item No.

65 l 290028

Volume Item No.

4 × 4 m 207220

Net size Item No.




7

151


Hundt Hand BrushWith coco bristles, unpainted.

Hundt DustpanZinc-plated metal, with wooden handle.

280 mm 290011

Length Item No.

44 cm 290015

Length Item No.

STANLEY FatMax™ Rolling WorkshopPlenty of storage for all your tools, fixings and accessories; ideal foron-site; extremely strong but easy to pull around, large metal rustproof latches with padlock eye, 20'' detachable metal plastic toolbox with removable tray, 2 deep 4" drawer with ball bearing slides,large metal storage bin that provides extra large capacity of portabletool storage, heavy duty 7" wheels, total weight 20kg

57×39×90 cm 210235

Dimensions Item No.

STANLEY FatMax™ Express Folding Workbench Suitable for sawing, drilling, screwdriving, precision woodworking orany jobs that require materials to be fixed securely into place. Com-patible with vertical and horizontal clamps and with collapsible metallegs, it is easily set up in seconds, supporting up to 455kg of mate-rial. The workbench effortlessly folds into a compact unit for easy sto-rage or transportation. Two sturdy handles add to its portablility.

85 × 60 cm 210220

Work surface Item No.






7

152


OPN Super-Multispray OP 50 SSpecial oil for maintenance and care, for a variety of applications inindustry, car repair, trade etc.; universally usable as rapid rust remover,contact spray, corrosion protection, metal care, lubricant, penetratingoil, gun oil etc.; also removes contaminations by tar, resins etc.

OPN Weld Separating Spray UF 2000®, silicone-free Non-combustible substance, non-flammable propellant, with corrosioninhibitors, for the inert gas and electronic manual welding, prevents thesticking of welding spatters, increases the lifetime of the burner consid-erably, biodegradable substance.

OPN Cutting Oil SprayHigh performance cutting oil for drilling, tapping, broaching etc.;universally suitable for steel, stainless steels, nonferrous metals; verygood adhesion, economical and rational, without aggressive additives.

400 ml 290002

Content Item No.

400 ml 290004

Content Item No.

OPN Cleaning SprayHighly concentrated special degreaser with 97% active ingredient, removes greases, brake fluid, tar, wax, oil, dirt etc. down to pores; for use throughout the industry, car repair, trade, urban utilities etc.

500 ml 290021

Content Item No.

400 ml 290115

Content Item No.




7

153


Hundt Paint Marker Valve Action® for smooth surfacesFast-drying liquid paint marker that provides long-lasting, wear- andweather-resistant marks; for the application in industrial manufacturing,automotive construction, metal fabrication, construction, welding, ship-ping supply, textile industry, aviation and aerospace; for steel and iron,plastic, glass, pipes and tubes, rubber and tires, cloth and fabric.

Hundt Tube Marker Stylmark® 3mm

Hundt Construction Marker Pica-Dry® with graphite leadMarks and writes on all materials also on dusty, rough, oily, wet anddark surfaces; refill leads in 3 different colours, big protective cap withstrong clip in signal colour, can be handled with one hand, does notfall out, sharpener built into the front of the cap easy to handle, alwaysreachable, can be wiped off on glossy surfaces with wet tissue.

Hundt Paint Marker PRO-LINE® XT for smooth surfaces

2.8 mm 420270

Ø Item No.

-46°C - 66°C white 280050-46°C - 66°C yellow 280051-46°C - 66°C red 280052-46°C - 66°C black 280053-46°C - 66°C aluminum 280054-46°C - 66°C gold 280055

Marking range Colour Item No.

Engineered for the ultimate marking performance on rough, rusty, anddirty surfaces that utilizes an enamel resin to provide enhanced wear-,weather- and chemical-resistance; for the application in steel mills andwarehouses, metal fabrication, oil and gas, automotive, ship building/repair, construction, metal production; for rusty metal, steel/iron, pipes/tubes, plates, non-ferrous metals, rubber/tires, plastic, glass, ceramic.

-46°C - 66°C white 280056-46°C - 66°C yellow 280057-46°C - 66°C red 280058-46°C - 66°C black 280059-46°C - 66°C silver 280060-46°C - 66°C gold 280061


Metal-ball tip marker for marking most surfaces, the aluminum squeezetube and thick paint makes it suitable for rough, vertical and overheadsurfaces with excellent adhesion on oily and wet surfaces; weather-,water- and UV-resistant; for metal, stone, wood, rubber und glass.

-20°C - 70°C white 280073-20°C - 70°C yellow 280074-20°C - 70°C red 280075-20°C - 70°C black 280076-20°C - 70°C grey 280077-20°C - 70°C gold 280078







8

155

Occupational Safety

Hundt Working Gloves with shortened fingersWith hook-and-pile fastener on wrist, made of soft nappa,colour: nature.

Hundt Working Gloves Cygnocut 11Cut resistant fine knitted glove made of Dyneema® fabric, inside handsurfaces and finger tips with PU-coating, CE standard EN338-4342.

11 290171 12 290121 13 290122

Size Item No.

8 290141 9 290142

11 290149 10 290143

Size Item No.

Hundt Working Gloves Cygnocut 66Cut resistant fine knitted glove made cut resistant fiber HPPE, insidehand surfaces and finger tips with Nitrile coating, highest cut pro-tection class, very good sense of touch, CE standard EN338-4543.

8 290218 9 290219

10 290220

Size Item No.

Hundt Working Gloves Cygnomont 22Fine knitted glove made of 100% Nylon, finger tips and inside handsurfaces with black PU-coating, CE standard EN388-4131.

8 290179 9 290178

10 290138

Size Item No.




8 Occupational Safety

156

Hundt Working Gloves Cygnofoam 30Fine knitted glove, Nylon grey, finger tips and inside handsurfaces with black foam Nitrile palm coating, with knitted cuff,excellent fitting and very good sense of touch, pleasant wearingcomfort, white hem, CE standard EN388-4121.

8 290135 9 290136

10 290137

Size Item No.

Hundt Working Gloves Cygnothermo 10Fine knitted winter glove with Polymer coating and sewed-in acryl-cotton-mixture lining, high mechanical resistance - anyway verycomfortable to wear, roughened surface structure provides goodwet- and dry grip, CE standard EN388-3231.

Hundt Working Gloves Cygnofoam DuraflexFine knitted glove with seamless nylon circular knit for perfect fit andtactility, new special breathable nitrile foam coating of the palm, goodwet-/dry grip, extra high abrasion resistance, CE standard EN388-4121.

7 290240 8 290241

10 290243 9 290242

11 290244

Size Item No.

Hundt Working Gloves Cygnofoam 50Fine knitted glove with seamless nylon circular knit for perfect fit andtactility, breathable nitrile foam coating of the palm, very good wet-/dry grip, CE standard EN388-4141.

8 290205 9 290206

10 290207

Size Item No.

9 2901848 290185

10 290158

Size Item No.




8

157

Occupational Safety

Hundt Hearing Protector Muff OPTIME™ IMultifunctional hearing protection that stands out due to its low weight,suitable for short and long application periods, good sound attenuation -especially in high frequency range; the insulating properties provide verygood communication possibilities.

Hundt Hearing Protector PlugsE-A-R® soft ear plugs are made of environment-friendly Polyurethanefoam which slowly restores to the original shape. These multi-usageplugs ensure a constant contact pressure and a good sound attenua-tion at optimal comfort.Packed in pairs, PU = 250 pairs

27 dB 290127

SNR value Item No.

Hundt Hearing Protector Muff OPTIME™ IIIFor use in extremely noise environments, head band made of stainlesssteel, continuously variable height setting, soft plastic foam and liquidfor long periods of use, double casing minimising resonance in theholder casing, maximising high-frequency attenuation.

35 dB 290131

SNR value Item No.

PE foam 290155

Material Item No.

ARTEX Safety Harness AX11Catching eyelet in the shoulder area, quick release fasteners on body-and leg straps; shoulder-, body- and leg straps adjustable in length;suitable for following applications: catching, holding, saving.fasteners with shock absorber are additionally required.Strap width: 45mm, strap material: Polyamid, CE standard EN361

0.8 kg 290161

Weight Item No.






8

158

Occupational Safety

ARTEX Safety Harness AX40Catching eyelet in shoulder area, 2 lateral holding eyelets, quickrelease fasteners on body- and leg straps, shoulder-, body- and legstraps adjustable in length; universal strap with attachment opportunityin back and additional holding strap with lateral holding eyelets,suitable for following applications: catching, holding, saving;fasteners with shock absorber are additionally required.strap width: 45mm, strap material: Polyamid, CE standard EN361

ARTEX Fastener with Shock Absorber and aluminium snap-hook FS 90

ARTEX Fastener with Shock Absorber and one-hand snap-hook FS 51

Fastener of safety rope with shock absorber that limits the impact forceto a medical viable value of max. 6.0 kN in case of a fall; with safetyrope S 12, one-hand steel snap-hook FS 51 at the shock absorber,rope end with aluminium snap-hook FS 90, to use in combination witha safety harness, CE standard EN354/355.

Fastener of safety rope with shock absorber that limits the impact forceto a medical viable value of max. 6.0kN in case of a fall. With safetyrope S 12, steel one-hand snap-hook FS 51 at the shock absorber,to use in combination with a safety harness, CE standard EN354/355.

1.2 kg 290160

Weight Item No.

1.5 m 12 mm 0.9 kg 290166 2.0 m 12 mm 0.9 kg 290165

Length Rope Ø Weight Item No.

1.5 m 12 mm 0.9 kg 290163 2.0 m 12 mm 0.9 kg 290162

Length Rope Ø Weight Item No.

0.95 kg 290164

Weight Item No.

ARTEX Safety Harness AX20Catching eyelet in shoulder area, 2 catching straps in cheast area,shoulder- and leg straps adjustable in length, universal strap withattachment opportunity in front and back, suitable for following appli-cations: catching, holding, saving, roping.strap width: 45mm, strap material: Polyamid, CE standard EN361



159

Occupational Safety 8


Online bestellen

Fine Particle Mask FFP 2With Cool-Flow exhalation valve, protection against solid and liquidparticles, up to 10 times the MAK value, harmful and harmful substan-ces, standard EN149

Safety HelmetSafety helmet Master 4 with webbing interior, with helmet shell pulleddown at the neck, universal size, standard EN397.

white 290027

Colour Item No.

yellow 290047

Colour Item No.

clear 290194 grey 290196

Glass color Item No.

Safety Goggles, Model BostonPolycarbonate double-lens goggles, adjustable strap length, 100% UVprotection, fog-proof, scratch-resistant, distortion-free vision, highest vi-sual performance, suitable for permanent use, F - shock with lowenergy (45 m / s), protection class PSA cat. I, standard EN166.

clear 290140

Glass color Item No.

Safety Goggles, full protectionFull-protection safety goggles with clear plastic shield, with direct venti-lation, CE approved, glasses portable over prescription glasses.





160


Online-Shop Ordering

Europe Delivery Outside Germany

We deliver against advance payment (2% dis-count) or credit card in EUR. The shipping costsdiffer from the domestic costs. The country spe-cific prices you can find in our Terms and Condi-tions (page 161).

Order in only 3 steps

Select item, enter quantity and put the item intothe shopping cart by one click. Of course thecontents of your basket can be corrected at anytime. If your cart contents complies with your re-quest, just press Bestellung fertigstellen.Just enter your address, send the order by push-ing the button, done. You will receive an orderconfirmation via e-mail and the goods will beshipped to you in a few days.

complete order

selection of quantity

shopping cart view

Quick Purchase

In case you already know the item numbers ofyour requested articles, you can place the itemsdirectly into the cart - and your order is evenfaster. Choose online-shop menu item Schnell-kauf, just enter quantity and item number, checkyour cart and place your order.

www.hundt-direkt.de

Quick Purchase





161


Terms and Conditions

1. PricesAll prices in our Online-Shop are per piece or per packing unit. Delivery is ex works.We reserve the right to change prices and delivery possibilities.

2. DeliveryThe delivery normally takes place with the parcel service UPS within a week. In case of any deviations we inform the customer.We ship to every EU country, Switzerland and other countries.

For orders within Germany shipping costs per package are:

EUR 4.95 with a goods value < EUR 100.00 (EUR 5.89 incl. VAT).For orders with a goods value ≥EUR 100.00 shipping within Germany is free buyer’s address as far as the total weight does not exceed 32 kg. For shipments with a total weight more than 32 kg incidental costs are billed.

Deliveries to European countries are possible against credit card or advance payment (2% discount).The shipping costs per package up to 32 kg are:

EUR 9.95 for Belgium, Czech Republic, Denmark, Luxemburg, Netherlands EUR 11.95 for Austria, Croatia, England, Finland, France, Italy, Poland, Slovak Republic, Slovenia, Sweden EUR 16.95 for Bulgaria, Estonia, Greece, Hungary, Ireland, Latvia, Lithuania, Northern Ireland, Norway, Portugal, Romania,

Spain, Switzerland

The following applies to sales tax for foreign deliveries: Customers outside the EU as well as EU customers with present VAT ID no taxwill be charged. The German VAT (currently 19%) will be billed to EU customers without present VAT ID. For further countries we willinform you about shipping costs on request.

On the shipping day you receive an e-mail notification from UPS with the planned delivery date and the package number. UPS shipment tracking informs you at any time about the current status of the shipment. In case of delivery problems you will also be informed by e-mail.

Bulky goods we supply with our contract freight forwarder.Information on delivery times are made in all conscience and are planning data without obligation.

3. WarrantyFor all goods delivered by us we ensure accuracy. In case of defects within the statutory warranty period we render replacement orrepair at our option. With regard to the use of the goods supplied by us no specific properties are assured. Therefore, warranty claimsbeyond the above mentioned, in particular damage claims, are excluded.

4. Transfer of perilsWith dispatch of the delivery item, the risk is transferred to the purchaser, even in case of “post paid” deliveries.

5. Reservation of titleWe reserve the right of ownership in respect of the goods supplied until such time as all claims under the business relationship with thepartner have been met. For further processing or resale, the claim against a third party are considered as assigned to us.

6. PaymentOutside Germany, you can choose between the following payment:

Advance payment (2% discount) Credit card (VISA/Mastercard) immediately without deduction

7. Right of returnIf the delivered goods do not match your requirements, you have a right to return within 14 days of delivery (except custom-madeproducts). In this case please send the goods in question back to us in a safe way and in original packaging. From a value of EUR 40.00 we bear the costs for the return transport.

8. Place of performance / jurisdictionPlace of performance and place of jurisdiction is Wuppertal in Germany.






A Pagesangle drills 72, 73, 79angle drives 74angle grinder 107-109Armaflex brushes 58Armaflex knives 44aspirator 111, 112aviation snips 12, 13

Bbale care 148batteries 115, 117, 118, 120, 121bead holding clip 26bead hook 26beading pliers 57beveller 29bit holder 122bits 123blade for Panel Cutter 130blades for circular hand saw 131blades for cutter knifes 47blades for insulation saws 45blades for jigsaw 132blades for plunge saw 131blades for reciprocal saw 132blind rivet nut hand tool 63, 64bolt cutter 36bricklayer cord 57bricklayers' trowel 54, 55brushes 58, 59, 151bucket 150building draw pulley 150

Ccable reels 138, 139cables 139, 140caliper 16-18carpenters' roofing hammer 39carpenter's square 19carpenters’ pincers 34carpet knive 47cart 148cartridge applicator gun 53cartridge pistol 53CEE power distributor 141, 142CEE power extension 140center punch 39chain for PanelCutter 130chain saw 101chalk liner reel 57charger 116, 117, 119-121circle cutter 46circular hand saw 101, 102cleaning discs 133cleaning spray 152clinching pliers 27, 28combination hammer 81, 82combination pliers 32combination ratchet spanner 50concreters’ nippers 34, 35conical drill bit 125construction marker 153contractors‘ bucket 150control cabinet key 37cordless angle drill 72-74

Pagescordless angle grinder 107, 108cordless beading machine 69cordless circular hand saw 102cordless drill 75cordless drywall screw gun 72, 74cordless impact screw driver 72cordless jigsaw 103, 104cordless metal screw gun up 75cordless metal shear 84, 88, 90cordless MultiMaster 110cordless nibbler 94, 96cordless oscillating multi-tool 110cordless plunge saw 101cordless power locker 100cordless profile nibbler 92, 94, 96, 97cordless reciprocal saw 105, 106cordless riveting tools 65, 66cordless sabre saw 105, 106cordless screw driver 70, 71, 73, 74, 75cordless seam locker 98, 99cordless slitting shear 86, 87, 89cordless worklight 143, 144corner clinching pliers 28crimper pliers 56cross-slot bits 123curve scissors 91cutter knife 47cutting blades 128cutting devices 48cutting discs 133cutting edges for metal shears 128cutting oil spray 152cutting pliers 35, 36

Ddeburrer 14demolition hammer 81, 82diagonal cutter 36die for hand hole punch 25die for profile nibbler 129die holder for profile nibbler 128distance measure tools 113divider 16-18double-ended body drill 124double-fulcrum end cutting nipper 35drills 124-126drilling machines 75, 78-81dry wall screw driver 78drywall cutter 46drywall profile cutter 57drywall saw 40, 41drywall screwdriver 72, 74, 76-78dust mask 159dustpan 151

EEdding® 18edge roller 29enamel varnish brush 58end cutting nippers 35energy-saving lamps 144extractor 111, 112


162

Alphabetical Index




F Pagesfall protection 157-158fastening knobs 48fastening tools 26files 59filling trowel 55fine dust mask 159flat blade bit 123flat brush 58flat nose pliers 28flat precision square 19foil cutting appliance 48folding rule 20

Ggloves 155, 156glue can with brush 59glue spatula 54grindstone 44grip pliers 30, 31guiding rail 130

Hhacksaw frame 40halogen floodlight 143hammer 38, 39hammer drill bit SDS-plus 126hand brush 151hand hole punch 24hand lever punching machine 25hand sander 55hand setting pliers 26hand truck 148handle for insulation saw blade 45handsaw 40, 41head pin welder 136hearing protection 157helmet 159hemp rope 150hog ringer 49hole punch 24, 25hole saw 126hook 26HSS drills 124, 125

Iimpact driver 72industrial and professional scissors 46industrial vacuum cleaner 111, 112inside caliper 17inspection camera 114insulating tool kit 8insulation knife 42-44insulation nail welder 136insulation saw 41insulation shear 42insulation tool-set 8insulators template 19inverter welder

J 135Japanese spatula 54jewellers’ snips 45jigsaw 41, 103, 104

K Pageskeyhole saw 41knives 42-44

Llaser measure 113lashing strap 23lazy tong riveting tool 63leather shears 46LED lights 143, 144lights 143, 144load-carrying net 150locksmith's hammer 38

Mmagnetic bit-holder 122, 123marker 18, 153marking gauge 18marking template 15-22marking tools 15-22measuring tools 20-22, 113mechanics' nippers 34, 35metal jigsaw 104metal saw 102metal screw gun 75metal shears 9-14, 45, 84-91mini folding pliers 27mixing stirrer 127mortar bucket 150MultiMaster 110multi-purpose shears 46

Nnet 150nibbler 10, 92-97

Ooffset vertical snips 13oil spray 152one-hand tensioner 23open cart 149oscillating multi-tools 110outside caliper 17

Ppadlocks 147paint marker 153painter´s scraper 54pallet truck 149panel cutter 101pelican snips 9pens 18, 153permanent marker 18pin gun 49pincers 27-35, 56pipe crimper 29plane 55, 56planer file 56plaster plane 55plastering trowel 54plastic setting tool 48platform truck 148pliers 27-35, 56plunge saw 101pneumatic riveting tools 67, 68


163

Alphabetical Index






Pagespowder for chalk liner reel 57power distributor 141, 142power extension 139, 140power fastener 100precision square 19profile cutter 57profile nibbler 92-97protective eyewear 159protractor 19PUK metal saw 40punch for hand hole punch 24, 25punch for profile nibblers 128, 129punch lock riveters 56punch snips 9, 10, 14punching tools 24, 25

Rradiator brush 58radius edge roller 29ratchet 50reciprocal saw 105, 106rigid foam saw 40ring brush 58ring staples 49ring wrench 50riveting tools 61-68rope 150round nose pliers 29rubber mallet 39rule 20

Ssabre saws 105, 106safety belt 157, 158safety harness 157, 158safety helmet 159safety strap cutter 45sander 55sanding block 55sanitary key 37saw blades 131, 132saw chain 130saw frame 40scraper 54screw driver 51, 52screwdriller 70, 71, 73-75scribers 15, 16seam locker 98-100seam opening pliers 28seaming pliers 28section setting pliers 56setting pliers 26setting tool 48shape and straight cutting snips 9-11shape cutting punch snips 9shears 9-14, 42, 46, 84-91sheath 44sheet metal nibbler 14sheet shears 9-14, 45shock absorber 158shockproof socket outlet 139slitting shears 86, 84, 87, 89, 91smoothing trowel 55snap-off blades 47

Pagessocket bit 50, 122socket wrench 122soldering fluid brush 58spindle tensioner 23spiral stirrer 127spirit levels 22spotlight 143, 144spot-welding gun 135spray 152square drive bit 123squares 19staple gun 49staples 26, 49steel beam trammels 18steel rule 20steel squares 19steel strip tensioner 23step drill 125stirring attachments 127stirring devices 83straight cutting snips 12, 13strap cutter 45stud welding unit 136

TTalmeter 22tank and boiler tensioner 23tape rule 20-22tensioning tools 23thermo detector 114tinsmith' pliers 28tool cases 146tools for screws and nuts 50-52tool-set for insulation 8tower pincers 34, 35transport equipment 148-150trapezoid blades 47trowels 55tube marker 153twist drill 124

Uuniversal key (MEP) 37

varnish brush 58

Wwaterpump pliers 33weld separating spray 152welding equipment 135, 136welding tongs 135wet/dry extractor 111, 112wing divider 17wooden mallet 39working gloves 155, 156work lights 143, 144wrench 50


164

Alphabetical Index







Wilhelm Hundt GmbHSchwabhausen 25 42349 Wuppertal, Germany

Phone: +49 202 430448-0Fax: +49 202 430448-20E-Mail: [email protected]: www.hundt.deOnline-Shop: www.hundt-direkt.de

12/2016

Documents

Hundt Tools Catalogue · TRUMPF TruTool PN 200 Cordless Profile Nibbler 18V 4.0Ah Bosch GTC 400 C Cordless Thermo Detector 12V Specifically designed for trapezoidal sheets up to a