Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
22 hrs
1 pcs
f
0.15 mm
k
0.40 mm
h
PLA
115 g
d
MK3/S
Summary
Left and right hemispheres of the brain of Rajat Jain (25) obtained with anMRI scan and used in UCSF's and UCSD's glassbrain project. I got the 3dfiles from the National Institutes of Health 3D Print Exchange web site.
There are two STL files, which came from these respective URLs: Left Side: https://3dprint.nih.gov/discover/3DPX-000757 Right Side: https://3dprint.nih.gov/discover/3DPX-000758
World & scans > People
brain
The GCODE prints both hemispheres at the same time. Note that themodel contains internal brain structures that cannot be seen on the print,so I chose to use the PrusaSlicer Support All option to fill any internalvoids.
The two sides fit together nicely, as you can see in one of the photos.
Randy
Human BrainHemispheres fromMRI data
VIEW IN BROWSER
updated 23. 9. 2019 | published 23. 9. 2019
Print Files (.gcode) DOWNLOAD ALL FILES
77.6 MB
21.68 hrs f 0.15 mm k 0.40 mm h PLA 114.70 g d MK3/S
updated 23. 9. 2019
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
13.3 MBupdated 23. 9. 2019
13.4 MBupdated 23. 9. 2019
Find source .stl files on Thingiverse.com
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-NonCommercial
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
brain_both_hemispheres_015mm_pla_mk3s_21h41m.gcode
brain-left-hemisphere.stl
brain-right-hemisphere.stl