Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in are the properties of their respective owners.
WARNINGPressing the printer icon or “quick printing” this document will print
all of the guides in this compilation.
Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle.
Print only the pages for your vehicle using the advanced options in the Print menu.
Install your Maestro RR according to the guide for your vehicle.
HOW TO USE THIS INSTALL GUIDE1
2
3
SELECT VEHICLE PRINT PAGES NEEDED
E L E C T R O N I C S
Click here for: Radar Installation Guides
2010-2012Honda accord crosstour
WitH aMP not retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda accord crosstour WitH aMP not retaining oeM BluetootH 2010-2012
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda accord crosstour WitH aMP not retaining oeM BluetootH 2010-2012
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Connect the Orange/Red wire at the Bluetooth module. See
the vehicle wire reference chart for wire color and location.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the speakers and sub RCA cables.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
8
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda accord crosstour WitH aMP not retaining oeM BluetootH 2010-2012
8
AUXAUX
BB
DD
AA
SUBSUB *
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
MAESTRO RR MODULE
STEP 1
MAINHARNESS
HO2 T-HARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
STEP 5
STEP 6
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 4
STEP 3
OBDII CONNECTOR
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
RCA CABLES
BLUETOOTH UNIT
WHITE /RED (NC)
ORANGE/RED
UNPLUG BLUETOOTH MODULE
SEE WIRE CHARTSWI 2SWI 2
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda accord crosstour WitH aMP not retaining oeM BluetootH 2010-2012
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda accord crosstour WitH aMP not retaining oeM BluetootH 2010-2012
3 4 5 61 2
17 18 19 20
7 8
21 22 15 16
11 12 13 149 10
23 24 25 26 27 28
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
SWI 2 ~ ~ 28 pin 02 Blue (DATA) Bluetooth unit, left end of dash
Bluetooth connector
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda accord crosstour WitH aMP not retaining oeM BluetootH 2010-2012
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2010-2012Honda accord crosstour
WitH aMP retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda accord crosstour WitH aMP retaining oeM BluetootH 2010-2012
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda accord crosstour WitH aMP retaining oeM BluetootH 2010-2012
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the speakers and sub RCA cables.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
3
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda accord crosstour WitH aMP retaining oeM BluetootH 2010-2012
3
AUXAUX
BB
DD
AA
SUBSUB*
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
WHITE /RED (NC)ORANGE/RED (NC)
MAESTRO RR MODULE
STEP 1
MAINHARNESS
HO2 T-HARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
STEP 4
STEP 5
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 3 OBDII CONNECTOR
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
RCA CABLES
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda accord crosstour WitH aMP retaining oeM BluetootH 2010-2012
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda accord crosstour WitH aMP retaining oeM BluetootH 2010-2012
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda accord crosstour WitH aMP retaining oeM BluetootH 2010-2012
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2010-2012Honda accord crosstour
WitHout aMP not retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda accord crosstour WitHout aMP not retaining oeM BluetootH 2010-2012
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda accord crosstour WitHout aMP not retaining oeM BluetootH 2010-2012
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Connect the Orange/Red wire at the Bluetooth module. See
the vehicle wire reference chart for wire color and location.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
To retain OEM sub, see instruction in vehicle wire chart (if applicable).
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
10
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda accord crosstour WitHout aMP not retaining oeM BluetootH 2010-2012
10
AUXAUX
BB
DDSUBSUB
*
AA
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
MAESTRO RR MODULE
STEP 1
HO2 T-HARNESS
STEP 5
STEP 6
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 4
STEP 3
OBDII CONNECTOR
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
BLUETOOTH UNIT
WHITE
RED (NC)
CUT AND REMOVE THE RCA JACKS
MAINHARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
WHITE /RED (NC)
ORANGE/RED
UNPLUG BLUETOOTH MODULE
SEE WIRE CHARTSWI 2SWI 2
NOT REQUIRED
STEERING WHEELCONTROL CABLE
ADDITIONAL PARTS MAY BE REQUIRED TORETAIN OEM SUB. REFER TO VEHICLE WIRE CHART.
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda accord crosstour WitHout aMP not retaining oeM BluetootH 2010-2012
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda accord crosstour WitHout aMP not retaining oeM BluetootH 2010-2012
3 4 5 61 2
17 18 19 20
7 8
21 22 15 16
11 12 13 149 10
23 24 25 26 27 28
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
SWI 2 ~ ~ 28 pin 02 Blue (DATA) Bluetooth unit, left end of dash
Bluetooth connector
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda accord crosstour WitHout aMP not retaining oeM BluetootH 2010-2012
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2010-2012Honda accord crosstour
WitHout aMP retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda accord crosstour WitHout aMP retaining oeM BluetootH 2010-2012
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda accord crosstour WitHout aMP retaining oeM BluetootH 2010-2012
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
To retain OEM sub, see instruction in vehicle wire chart (if applicable).
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
2
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda accord crosstour WitHout aMP retaining oeM BluetootH 2010-2012
2
AUXAUX
BB
AA
*
DDSUBSUB
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
WHITE /RED (NC)ORANGE/RED (NC)
MAESTRO RR MODULE
CUT AND REMOVE THE RCA JACKS
MAINHARNESS
HO2 T-HARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
ADDITIONAL PARTS MAY BE REQUIRED TORETAIN OEM SUB. REFER TO VEHICLE WIRE CHART.
FACTORY RADIO HARNESS
OBDII CONNECTOR
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED (NC)
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
STEP 1 STEP 4
STEP 5
STEP 2
STEP 3
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda accord crosstour WitHout aMP retaining oeM BluetootH 2010-2012
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda accord crosstour WitHout aMP retaining oeM BluetootH 2010-2012
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda accord crosstour WitHout aMP retaining oeM BluetootH 2010-2012
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2008-2012Honda accord
WitH aMP not retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda accord WitH aMP not retaining oeM BluetootH 2008-2012
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda accord WitH aMP not retaining oeM BluetootH 2008-2012
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Connect the Orange/Red wire at the Bluetooth module. See
the vehicle wire reference chart for wire color and location.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the speakers and sub RCA cables.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
8
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda accord WitH aMP not retaining oeM BluetootH 2008-2012
8
AUXAUX
BB
DD
AA
SUBSUB *
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
MAESTRO RR MODULE
STEP 1
MAINHARNESS
HO2 T-HARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
STEP 5
STEP 6
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 4
STEP 3
OBDII CONNECTOR
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
RCA CABLES
BLUETOOTH UNIT
WHITE /RED (NC)
ORANGE/RED
UNPLUG BLUETOOTH MODULE
SEE WIRE CHARTSWI 2SWI 2
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda accord WitH aMP not retaining oeM BluetootH 2008-2012
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda accord WitH aMP not retaining oeM BluetootH 2008-2012
3 4 5 61 2
17 18 19 20
7 8
21 22 15 16
11 12 13 149 10
23 24 25 26 27 28
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
SWI 2 ~ ~ 28 pin 02 Blue (DATA) Bluetooth unit, left end of dash
Bluetooth connector
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda accord WitH aMP not retaining oeM BluetootH 2008-2012
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2013Honda accord
WitH aMP not retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda accord WitH aMP not retaining oeM BluetootH 2013
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda accord WitH aMP not retaining oeM BluetootH 2013
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
STEP 3
• Connect the Orange/Red wire at the Bluetooth module. See the vehicle wire reference chart for wire color and location.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the speakers and sub RCA cables.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the cameras RCA cables (if equipped with backup camera or lane departure cameras).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
14
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda accord WitH aMP not retaining oeM BluetootH 2013
14
AUXAUX
BB
DD
SUBSUB *BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM
C
**
AA
MAESTRO RR MODULE
STEP 1
HO2 T-HARNESS
STEP 5
STEP 6
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2DATA
CABLEAUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
BLACK
CONNECT IF EQUIPPED *
MAINHARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
NOT REQUIRED
STEERING WHEELCONTROL CABLE
WHITE /RED (NC)
STEP 4 OBDII CONNECTOR
STEP 3 BLUETOOTH UNIT
ORANGE/RED
UNPLUG BLUETOOTH MODULE
SEE WIRE CHARTSWI 2SWI 2
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda accord WitH aMP not retaining oeM BluetootH 2013
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda accord WitH aMP not retaining oeM BluetootH 2013
65 87 1413 161521 43 109 11
1817 2019 21 22 23
12
2524 2726 28 29 30 31 32
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
SWI 2 ~ ~ 32 pin 02 LtBlue (DATA) Bluetooth unit, center dash, below radio
Bluetooth connector
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda accord WitH aMP not retaining oeM BluetootH 2013
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2014-2015Honda accord
WitH aMP not retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda accord WitH aMP not retaining oeM BluetootH 2014-2015
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda accord WitH aMP not retaining oeM BluetootH 2014-2015
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
STEP 3
• Connect the Orange/Red wire at the Bluetooth module. See the vehicle wire reference chart for wire color and location.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the speakers and sub RCA cables.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the cameras RCA cables (if equipped with backup camera or lane departure cameras).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
14
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda accord WitH aMP not retaining oeM BluetootH 2014-2015
14
AUXAUX
BB
DD
SUBSUB *BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM
C
**
AA
MAESTRO RR MODULE
STEP 1
HO2 T-HARNESS
STEP 5
STEP 6
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2DATA
CABLEAUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
BLACK
CONNECT IF EQUIPPED *
MAINHARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
NOT REQUIRED
STEERING WHEELCONTROL CABLE
WHITE /RED (NC)
STEP 4 OBDII CONNECTOR
STEP 3 BLUETOOTH UNIT
ORANGE/RED
UNPLUG BLUETOOTH MODULE
SEE WIRE CHARTSWI 2SWI 2
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda accord WitH aMP not retaining oeM BluetootH 2014-2015
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda accord WitH aMP not retaining oeM BluetootH 2014-2015
65 87 1413 161521 43 109 11
1817 2019 21 22 23
12
2524 2726 28 29 30 31 32
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
SWI 2 ~ ~ 32 pin 02 LtBlue (DATA) Bluetooth unit, center dash, below radio
Bluetooth connector
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda accord WitH aMP not retaining oeM BluetootH 2014-2015
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2008-2012Honda accord
WitH aMP retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda accord WitH aMP retaining oeM BluetootH 2008-2012
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda accord WitH aMP retaining oeM BluetootH 2008-2012
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the speakers and sub RCA cables.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
3
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda accord WitH aMP retaining oeM BluetootH 2008-2012
3
AUXAUX
BB
DD
AA
SUBSUB*
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
WHITE /RED (NC)ORANGE/RED (NC)
MAESTRO RR MODULE
STEP 1
MAINHARNESS
HO2 T-HARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
STEP 4
STEP 5
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 3 OBDII CONNECTOR
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
RCA CABLES
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda accord WitH aMP retaining oeM BluetootH 2008-2012
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda accord WitH aMP retaining oeM BluetootH 2008-2012
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda accord WitH aMP retaining oeM BluetootH 2008-2012
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2013Honda accord
WitH aMP retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda accord WitH aMP retaining oeM BluetootH 2013
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda accord WitH aMP retaining oeM BluetootH 2013
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the speakers and sub RCA cables.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the cameras RCA cables (if equipped with backup camera or lane departure cameras).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
4
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda accord WitH aMP retaining oeM BluetootH 2013
4
AUXAUX
BB
DD
SUBSUB *BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM
C
**
AA
WHITE /RED (NC)ORANGE/RED (NC)
MAESTRO RR MODULE
STEP 1
HO2 T-HARNESS
STEP 4
STEP 5
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 3 OBDII CONNECTOR
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
BLACK
CONNECT IF EQUIPPED *
MAINHARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda accord WitH aMP retaining oeM BluetootH 2013
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda accord WitH aMP retaining oeM BluetootH 2013
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda accord WitH aMP retaining oeM BluetootH 2013
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2014-2015Honda accord
WitH aMP retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda accord WitH aMP retaining oeM BluetootH 2014-2015
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda accord WitH aMP retaining oeM BluetootH 2014-2015
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the speakers and sub RCA cables.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the cameras RCA cables (if equipped with backup camera or lane departure cameras).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
4
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda accord WitH aMP retaining oeM BluetootH 2014-2015
4
AUXAUX
BB
DD
SUBSUB *BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM
C
**
AA
WHITE /RED (NC)ORANGE/RED (NC)
MAESTRO RR MODULE
STEP 1
HO2 T-HARNESS
STEP 4
STEP 5
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 3 OBDII CONNECTOR
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
BLACK
CONNECT IF EQUIPPED *
MAINHARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda accord WitH aMP retaining oeM BluetootH 2014-2015
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda accord WitH aMP retaining oeM BluetootH 2014-2015
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda accord WitH aMP retaining oeM BluetootH 2014-2015
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2008-2012Honda accord
WitHout aMP not retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda accord WitHout aMP not retaining oeM BluetootH 2008-2012
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda accord WitHout aMP not retaining oeM BluetootH 2008-2012
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Connect the Orange/Red wire at the Bluetooth module. See
the vehicle wire reference chart for wire color and location.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
To retain OEM sub, see instruction in vehicle wire chart (if applicable).
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
10
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda accord WitHout aMP not retaining oeM BluetootH 2008-2012
10
AUXAUX
BB
DDSUBSUB
*
AA
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
MAESTRO RR MODULE
STEP 1
HO2 T-HARNESS
STEP 5
STEP 6
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 4
STEP 3
OBDII CONNECTOR
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
BLUETOOTH UNIT
WHITE
RED (NC)
CUT AND REMOVE THE RCA JACKS
MAINHARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
WHITE /RED (NC)
ORANGE/RED
UNPLUG BLUETOOTH MODULE
SEE WIRE CHARTSWI 2SWI 2
NOT REQUIRED
STEERING WHEELCONTROL CABLE
ADDITIONAL PARTS MAY BE REQUIRED TORETAIN OEM SUB. REFER TO VEHICLE WIRE CHART.
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda accord WitHout aMP not retaining oeM BluetootH 2008-2012
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda accord WitHout aMP not retaining oeM BluetootH 2008-2012
3 4 5 61 2
17 18 19 20
7 8
21 22 15 16
11 12 13 149 10
23 24 25 26 27 28
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
SWI 2 ~ ~ 28 pin 02 Blue (DATA) Bluetooth unit, left end of dash
Bluetooth connector
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda accord WitHout aMP not retaining oeM BluetootH 2008-2012
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2013Honda accord
WitHout aMP not retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda accord WitHout aMP not retaining oeM BluetootH 2013
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda accord WitHout aMP not retaining oeM BluetootH 2013
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
STEP 3
• Connect the Orange/Red wire at the Bluetooth module. See the vehicle wire reference chart for wire color and location.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the cameras RCA cables (if equipped with backup camera or lane departure cameras).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
13
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda accord WitHout aMP not retaining oeM BluetootH 2013
13
AUXAUX
BB
*
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM
C
**
DDSUBSUB
AA
WHITE /RED (NC)
MAESTRO RR MODULE
CUT AND REMOVE THE RCA JACKS
STEP 1
MAINHARNESS
HO2 T-HARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 5
STEP 6
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
BLACK
CONNECT IF EQUIPPED *
RED (NC)
NOT REQUIRED
STEERING WHEELCONTROL CABLE
STEP 4 OBDII CONNECTOR
STEP 3 BLUETOOTH UNIT
ORANGE/RED
UNPLUG BLUETOOTH MODULE
SEE WIRE CHARTSWI 2SWI 2
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda accord WitHout aMP not retaining oeM BluetootH 2013
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda accord WitHout aMP not retaining oeM BluetootH 2013
65 87 1413 161521 43 109 11
1817 2019 21 22 23
12
2524 2726 28 29 30 31 32
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
SWI 2 ~ ~ 32 pin 02 LtBlue (DATA) Bluetooth unit, center dash, below radio
Bluetooth connector
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda accord WitHout aMP not retaining oeM BluetootH 2013
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2014-2015Honda accord
WitHout aMP not retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda accord WitHout aMP not retaining oeM BluetootH 2014-2015
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda accord WitHout aMP not retaining oeM BluetootH 2014-2015
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
STEP 3
• Connect the Orange/Red wire at the Bluetooth module. See the vehicle wire reference chart for wire color and location.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the cameras RCA cables (if equipped with backup camera or lane departure cameras).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
13
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda accord WitHout aMP not retaining oeM BluetootH 2014-2015
13
AUXAUX
BB
*
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM
C
**
DDSUBSUB
AA
WHITE /RED (NC)
MAESTRO RR MODULE
CUT AND REMOVE THE RCA JACKS
STEP 1
MAINHARNESS
HO2 T-HARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 5
STEP 6
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
BLACK
CONNECT IF EQUIPPED *
RED (NC)
NOT REQUIRED
STEERING WHEELCONTROL CABLE
STEP 4 OBDII CONNECTOR
STEP 3 BLUETOOTH UNIT
ORANGE/RED
UNPLUG BLUETOOTH MODULE
SEE WIRE CHARTSWI 2SWI 2
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda accord WitHout aMP not retaining oeM BluetootH 2014-2015
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda accord WitHout aMP not retaining oeM BluetootH 2014-2015
65 87 1413 161521 43 109 11
1817 2019 21 22 23
12
2524 2726 28 29 30 31 32
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
SWI 2 ~ ~ 32 pin 15 LtBlue (DATA) Bluetooth unit, center dash, below radio
Bluetooth connector
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda accord WitHout aMP not retaining oeM BluetootH 2014-2015
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2008-2012Honda accord
WitHout aMP retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda accord WitHout aMP retaining oeM BluetootH 2008-2012
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda accord WitHout aMP retaining oeM BluetootH 2008-2012
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
To retain OEM sub, see instruction in vehicle wire chart (if applicable).
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
2
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda accord WitHout aMP retaining oeM BluetootH 2008-2012
2
AUXAUX
BB
AA
*
DDSUBSUB
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
WHITE /RED (NC)ORANGE/RED (NC)
MAESTRO RR MODULE
CUT AND REMOVE THE RCA JACKS
MAINHARNESS
HO2 T-HARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
ADDITIONAL PARTS MAY BE REQUIRED TORETAIN OEM SUB. REFER TO VEHICLE WIRE CHART.
FACTORY RADIO HARNESS
OBDII CONNECTOR
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED (NC)
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
STEP 1 STEP 4
STEP 5
STEP 2
STEP 3
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda accord WitHout aMP retaining oeM BluetootH 2008-2012
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda accord WitHout aMP retaining oeM BluetootH 2008-2012
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda accord WitHout aMP retaining oeM BluetootH 2008-2012
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2013Honda accord
WitHout aMP retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda accord WitHout aMP retaining oeM BluetootH 2013
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda accord WitHout aMP retaining oeM BluetootH 2013
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the cameras RCA cables (if equipped with backup camera or lane departure cameras).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
5
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda accord WitHout aMP retaining oeM BluetootH 2013
5
AUXAUX
BB
*
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM
C
**
DDSUBSUB
AA
WHITE /RED (NC)ORANGE/RED (NC)
MAESTRO RR MODULE
CUT AND REMOVE THE RCA JACKS
STEP 1
MAINHARNESS
HO2 T-HARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 4
STEP 5
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 3 OBDII CONNECTOR
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
BLACK
CONNECT IF EQUIPPED *
RED (NC)
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda accord WitHout aMP retaining oeM BluetootH 2013
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda accord WitHout aMP retaining oeM BluetootH 2013
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda accord WitHout aMP retaining oeM BluetootH 2013
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2012-2015Honda civic WitH 7" screen
WitH aMP not retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda civic WitH 7" screen WitH aMP not retaining oeM BluetootH 2012-2015
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda civic WitH 7" screen WitH aMP not retaining oeM BluetootH 2012-2015
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the speakers and sub RCA cables.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the cameras RCA cables (if equipped with backup camera or lane departure cameras).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
4
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda civic WitH 7" screen WitH aMP not retaining oeM BluetootH 2012-2015
4
AUXAUX
BB
DD
SUBSUB *BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM
C
**
AA
WHITE /RED (NC)ORANGE/RED (NC)
MAESTRO RR MODULE
STEP 1
HO2 T-HARNESS
STEP 4
STEP 5
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 3 OBDII CONNECTOR
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
BLACK
CONNECT IF EQUIPPED *
MAINHARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda civic WitH 7" screen WitH aMP not retaining oeM BluetootH 2012-2015
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda civic WitH 7" screen WitH aMP not retaining oeM BluetootH 2012-2015
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda civic WitH 7" screen WitH aMP not retaining oeM BluetootH 2012-2015
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2012-2015Honda civic WitH 7" screen
WitHout aMP not retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda civic WitH 7" screen WitHout aMP not retaining oeM BluetootH 2012-2015
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda civic WitH 7" screen WitHout aMP not retaining oeM BluetootH 2012-2015
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the cameras RCA cables (if equipped with backup camera or lane departure cameras).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
5
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda civic WitH 7" screen WitHout aMP not retaining oeM BluetootH 2012-2015
5
AUXAUX
BB
*
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM
C
**
DDSUBSUB
AA
WHITE /RED (NC)ORANGE/RED (NC)
MAESTRO RR MODULE
CUT AND REMOVE THE RCA JACKS
STEP 1
MAINHARNESS
HO2 T-HARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 4
STEP 5
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 3 OBDII CONNECTOR
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
BLACK
CONNECT IF EQUIPPED *
RED (NC)
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda civic WitH 7" screen WitHout aMP not retaining oeM BluetootH 2012-2015
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda civic WitH 7" screen WitHout aMP not retaining oeM BluetootH 2012-2015
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda civic WitH 7" screen WitHout aMP not retaining oeM BluetootH 2012-2015
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2012-2013Honda civic
WitH aMP not retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda civic WitH aMP not retaining oeM BluetootH 2012-2013
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda civic WitH aMP not retaining oeM BluetootH 2012-2013
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Connect the Orange/Red wire at the Bluetooth module. See
the vehicle wire reference chart for wire color and location.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the speakers and sub RCA cables.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
8
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda civic WitH aMP not retaining oeM BluetootH 2012-2013
8
AUXAUX
BB
DD
AA
SUBSUB *
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
MAESTRO RR MODULE
STEP 1
MAINHARNESS
HO2 T-HARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
STEP 5
STEP 6
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 4
STEP 3
OBDII CONNECTOR
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
RCA CABLES
BLUETOOTH UNIT
WHITE /RED (NC)
ORANGE/RED
UNPLUG BLUETOOTH MODULE
SEE WIRE CHARTSWI 2SWI 2
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda civic WitH aMP not retaining oeM BluetootH 2012-2013
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda civic WitH aMP not retaining oeM BluetootH 2012-2013
6 58 714 1316 15 2 14 310 911
18 1720 19212223
12
25 2427 262829303132
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
SWI 2 ~ ~ 32 pin 15 Blue (DATA) Bluetooth unit, above glove box
Video + ~ ~ ~ 19 Black (+) MID
Video - ~ ~ ~ 03 White (-) MID
Bluetooth connector
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda civic WitH aMP not retaining oeM BluetootH 2012-2013
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2014-2015Honda civic
WitH aMP not retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda civic WitH aMP not retaining oeM BluetootH 2014-2015
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda civic WitH aMP not retaining oeM BluetootH 2014-2015
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Connect the Orange/Red wire at the Bluetooth module. See
the vehicle wire reference chart for wire color and location.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the speakers and sub RCA cables.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
12
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda civic WitH aMP not retaining oeM BluetootH 2014-2015
12
AUXAUX
DD
SUBSUB
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
*
BB
AA
WHITE /RED (NC)
ORANGE/RED
MAESTRO RR MODULE
STEP 1
MAINHARNESS
HO2 T-HARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
STEP 5
STEP 6
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 4
STEP 3
OBDII CONNECTOR
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED
BLACK (NC)
NOT REQUIRED
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
RCA CABLES
BLUETOOTH UNIT
UNPLUG BLUETOOTH MODULE
SEE WIRE CHARTSWI 2SWI 2
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda civic WitH aMP not retaining oeM BluetootH 2014-2015
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda civic WitH aMP not retaining oeM BluetootH 2014-2015
6 58 714 1316 15 2 14 310 911
18 1720 19212223
12
25 2427 262829303132
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
SWI 2 ~ ~ 32 pin 15 Blue (DATA) Bluetooth unit, above glove box
Video + ~ ~ ~ 19 Black (+) MID
Video - ~ ~ ~ 03 Red (-) MID
Bluetooth connector
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda civic WitH aMP not retaining oeM BluetootH 2014-2015
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2012-2013Honda civic
WitH aMP retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda civic WitH aMP retaining oeM BluetootH 2012-2013
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda civic WitH aMP retaining oeM BluetootH 2012-2013
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the speakers and sub RCA cables.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
3
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda civic WitH aMP retaining oeM BluetootH 2012-2013
3
AUXAUX
BB
DD
AA
SUBSUB*
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
WHITE /RED (NC)ORANGE/RED (NC)
MAESTRO RR MODULE
STEP 1
MAINHARNESS
HO2 T-HARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
STEP 4
STEP 5
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 3 OBDII CONNECTOR
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
RCA CABLES
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda civic WitH aMP retaining oeM BluetootH 2012-2013
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda civic WitH aMP retaining oeM BluetootH 2012-2013
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + ~ ~ ~ 19 Black (+) MID
Video - ~ ~ ~ 03 White (-) MID
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda civic WitH aMP retaining oeM BluetootH 2012-2013
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2014-2015Honda civic
WitH aMP retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda civic WitH aMP retaining oeM BluetootH 2014-2015
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda civic WitH aMP retaining oeM BluetootH 2014-2015
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the speakers and sub RCA cables.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
11
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda civic WitH aMP retaining oeM BluetootH 2014-2015
11
AUXAUX
DD
SUBSUB *
BB
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C AA
WHITE /RED (NC)ORANGE/RED (NC)
MAESTRO RR MODULE
STEP 1
MAINHARNESS
HO2 T-HARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
STEP 4
STEP 5
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 3 OBDII CONNECTOR
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
RCA CABLES
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda civic WitH aMP retaining oeM BluetootH 2014-2015
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda civic WitH aMP retaining oeM BluetootH 2014-2015
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + ~ ~ ~ 19 Black (+) MID
Video - ~ ~ ~ 03 Red (-) MID
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda civic WitH aMP retaining oeM BluetootH 2014-2015
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2012-2013Honda civic
WitHout aMP not retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda civic WitHout aMP not retaining oeM BluetootH 2012-2013
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda civic WitHout aMP not retaining oeM BluetootH 2012-2013
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Connect the Orange/Red wire at the Bluetooth module. See
the vehicle wire reference chart for wire color and location.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
To retain OEM sub, see instruction in vehicle wire chart (if applicable).
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
10
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda civic WitHout aMP not retaining oeM BluetootH 2012-2013
10
AUXAUX
BB
DDSUBSUB
*
AA
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
MAESTRO RR MODULE
STEP 1
HO2 T-HARNESS
STEP 5
STEP 6
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 4
STEP 3
OBDII CONNECTOR
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
BLUETOOTH UNIT
WHITE
RED (NC)
CUT AND REMOVE THE RCA JACKS
MAINHARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
WHITE /RED (NC)
ORANGE/RED
UNPLUG BLUETOOTH MODULE
SEE WIRE CHARTSWI 2SWI 2
NOT REQUIRED
STEERING WHEELCONTROL CABLE
ADDITIONAL PARTS MAY BE REQUIRED TORETAIN OEM SUB. REFER TO VEHICLE WIRE CHART.
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda civic WitHout aMP not retaining oeM BluetootH 2012-2013
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda civic WitHout aMP not retaining oeM BluetootH 2012-2013
6 58 714 1316 15 2 14 310 911
18 1720 19212223
12
25 2427 262829303132
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
SWI 2 ~ ~ 32 pin 15 Blue (DATA) Bluetooth unit, above glove box
Video + ~ ~ ~ 19 Black (+) MID
Video - ~ ~ ~ 03 White (-) MID
Bluetooth connector
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda civic WitHout aMP not retaining oeM BluetootH 2012-2013
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2014-2015Honda civic
WitHout aMP not retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda civic WitHout aMP not retaining oeM BluetootH 2014-2015
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda civic WitHout aMP not retaining oeM BluetootH 2014-2015
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Connect the Orange/Red wire at the Bluetooth module. See
the vehicle wire reference chart for wire color and location.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
9
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda civic WitHout aMP not retaining oeM BluetootH 2014-2015
9
AUXAUX
DDSUBSUB
*
BB
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C AA
MAESTRO RR MODULE
STEP 1
HO2 T-HARNESS
STEP 5
STEP 6
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 4
STEP 3
OBDII CONNECTOR
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
BLUETOOTH UNIT
WHITE
RED (NC)
CUT AND REMOVE THE RCA JACKS
MAINHARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
WHITE /RED (NC)
ORANGE/RED
UNPLUG BLUETOOTH MODULE
SEE WIRE CHARTSWI 2SWI 2
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda civic WitHout aMP not retaining oeM BluetootH 2014-2015
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda civic WitHout aMP not retaining oeM BluetootH 2014-2015
6 58 714 1316 15 2 14 310 911
18 1720 19212223
12
25 2427 262829303132
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
SWI 2 ~ ~ 32 pin 15 Blue (DATA) Bluetooth unit, above glove box
Video + ~ ~ ~ 19 Black (+) MID
Video - ~ ~ ~ 03 Red (-) MID
Bluetooth connector
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda civic WitHout aMP not retaining oeM BluetootH 2014-2015
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2012-2013Honda civic
WitHout aMP retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda civic WitHout aMP retaining oeM BluetootH 2012-2013
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda civic WitHout aMP retaining oeM BluetootH 2012-2013
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
To retain OEM sub, see instruction in vehicle wire chart (if applicable).
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
2
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda civic WitHout aMP retaining oeM BluetootH 2012-2013
2
AUXAUX
BB
AA
*
DDSUBSUB
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
WHITE /RED (NC)ORANGE/RED (NC)
MAESTRO RR MODULE
CUT AND REMOVE THE RCA JACKS
MAINHARNESS
HO2 T-HARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
ADDITIONAL PARTS MAY BE REQUIRED TORETAIN OEM SUB. REFER TO VEHICLE WIRE CHART.
FACTORY RADIO HARNESS
OBDII CONNECTOR
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED (NC)
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
STEP 1 STEP 4
STEP 5
STEP 2
STEP 3
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda civic WitHout aMP retaining oeM BluetootH 2012-2013
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda civic WitHout aMP retaining oeM BluetootH 2012-2013
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + ~ ~ ~ 19 Black (+) MID
Video - ~ ~ ~ 03 White (-) MID
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda civic WitHout aMP retaining oeM BluetootH 2012-2013
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2014-2015Honda civic
WitHout aMP retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda civic WitHout aMP retaining oeM BluetootH 2014-2015
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda civic WitHout aMP retaining oeM BluetootH 2014-2015
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
7
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda civic WitHout aMP retaining oeM BluetootH 2014-2015
7
BB
AUXAUX
STEP 1 STEP 4
STEP 5
STEP 2
STEP 3
*
DDSUBSUB
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C AA
WHITE /RED (NC)ORANGE/RED (NC)
MAESTRO RR MODULE
CUT AND REMOVE THE RCA JACKS
MAINHARNESS
HO2 T-HARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESS
OBDII CONNECTOR
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
RED (NC)
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
STEP 1 STEP 4
STEP 5
STEP 2
STEP 3
WHITE
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda civic WitHout aMP retaining oeM BluetootH 2014-2015
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda civic WitHout aMP retaining oeM BluetootH 2014-2015
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + ~ ~ ~ 19 Black (+) MID
Video - ~ ~ ~ 03 Red (-) MID
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda civic WitHout aMP retaining oeM BluetootH 2014-2015
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2012-2016Honda cr-v WitH 7" screen
WitH aMP not retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda cr-v WitH 7" screen WitH aMP not retaining oeM BluetootH 2012-2016
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda cr-v WitH 7" screen WitH aMP not retaining oeM BluetootH 2012-2016
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the speakers and sub RCA cables.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the cameras RCA cables (if equipped with backup camera or lane departure cameras).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
4
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda cr-v WitH 7" screen WitH aMP not retaining oeM BluetootH 2012-2016
4
AUXAUX
BB
DD
SUBSUB *BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM
C
**
AA
WHITE /RED (NC)ORANGE/RED (NC)
MAESTRO RR MODULE
STEP 1
HO2 T-HARNESS
STEP 4
STEP 5
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 3 OBDII CONNECTOR
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
BLACK
CONNECT IF EQUIPPED *
MAINHARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda cr-v WitH 7" screen WitH aMP not retaining oeM BluetootH 2012-2016
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda cr-v WitH 7" screen WitH aMP not retaining oeM BluetootH 2012-2016
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda cr-v WitH 7" screen WitH aMP not retaining oeM BluetootH 2012-2016
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2012-2016Honda cr-v WitH 7" screen
WitHout aMP not retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda cr-v WitH 7" screen WitHout aMP not retaining oeM BluetootH 2012-2016
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda cr-v WitH 7" screen WitHout aMP not retaining oeM BluetootH 2012-2016
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the cameras RCA cables (if equipped with backup camera or lane departure cameras).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
5
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda cr-v WitH 7" screen WitHout aMP not retaining oeM BluetootH 2012-2016
5
AUXAUX
BB
*
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM
C
**
DDSUBSUB
AA
WHITE /RED (NC)ORANGE/RED (NC)
MAESTRO RR MODULE
CUT AND REMOVE THE RCA JACKS
STEP 1
MAINHARNESS
HO2 T-HARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 4
STEP 5
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 3 OBDII CONNECTOR
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
BLACK
CONNECT IF EQUIPPED *
RED (NC)
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda cr-v WitH 7" screen WitHout aMP not retaining oeM BluetootH 2012-2016
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda cr-v WitH 7" screen WitHout aMP not retaining oeM BluetootH 2012-2016
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda cr-v WitH 7" screen WitHout aMP not retaining oeM BluetootH 2012-2016
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2012-2016Honda cr-v
WitH aMP not retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda cr-v WitH aMP not retaining oeM BluetootH 2012-2016
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda cr-v WitH aMP not retaining oeM BluetootH 2012-2016
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Connect the Orange/Red wire at the Bluetooth module. See
the vehicle wire reference chart for wire color and location.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the speakers and sub RCA cables.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
8
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda cr-v WitH aMP not retaining oeM BluetootH 2012-2016
8
AUXAUX
BB
DD
AA
SUBSUB *
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
MAESTRO RR MODULE
STEP 1
MAINHARNESS
HO2 T-HARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
STEP 5
STEP 6
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 4
STEP 3
OBDII CONNECTOR
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
RCA CABLES
BLUETOOTH UNIT
WHITE /RED (NC)
ORANGE/RED
UNPLUG BLUETOOTH MODULE
SEE WIRE CHARTSWI 2SWI 2
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda cr-v WitH aMP not retaining oeM BluetootH 2012-2016
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda cr-v WitH aMP not retaining oeM BluetootH 2012-2016
6 58 714 1316 15 2 14 310 911
18 1720 19212223
12
25 2427 262829303132
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
SWI 2 ~ ~ 32 pin 15 Yellow (DATA) Bluetooth unit, center dash in front of shifter
Video + ~ ~ ~ 19 Red (+) MID
Video - ~ ~ ~ 03 White (-) MID
Bluetooth connector
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda cr-v WitH aMP not retaining oeM BluetootH 2012-2016
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2012-2016Honda cr-v
WitH aMP retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda cr-v WitH aMP retaining oeM BluetootH 2012-2016
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda cr-v WitH aMP retaining oeM BluetootH 2012-2016
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the speakers and sub RCA cables.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
3
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda cr-v WitH aMP retaining oeM BluetootH 2012-2016
3
AUXAUX
BB
DD
AA
SUBSUB*
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
WHITE /RED (NC)ORANGE/RED (NC)
MAESTRO RR MODULE
STEP 1
MAINHARNESS
HO2 T-HARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
STEP 4
STEP 5
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 3 OBDII CONNECTOR
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
RCA CABLES
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda cr-v WitH aMP retaining oeM BluetootH 2012-2016
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda cr-v WitH aMP retaining oeM BluetootH 2012-2016
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + ~ ~ ~ 19 Red (+) MID
Video - ~ ~ ~ 03 White (-) MID
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda cr-v WitH aMP retaining oeM BluetootH 2012-2016
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2012-2016Honda cr-v
WitHout aMP not retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda cr-v WitHout aMP not retaining oeM BluetootH 2012-2016
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda cr-v WitHout aMP not retaining oeM BluetootH 2012-2016
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Connect the Orange/Red wire at the Bluetooth module. See
the vehicle wire reference chart for wire color and location.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
To retain OEM sub, see instruction in vehicle wire chart (if applicable).
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
10
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda cr-v WitHout aMP not retaining oeM BluetootH 2012-2016
10
AUXAUX
BB
DDSUBSUB
*
AA
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
MAESTRO RR MODULE
STEP 1
HO2 T-HARNESS
STEP 5
STEP 6
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 4
STEP 3
OBDII CONNECTOR
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
BLUETOOTH UNIT
WHITE
RED (NC)
CUT AND REMOVE THE RCA JACKS
MAINHARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
WHITE /RED (NC)
ORANGE/RED
UNPLUG BLUETOOTH MODULE
SEE WIRE CHARTSWI 2SWI 2
NOT REQUIRED
STEERING WHEELCONTROL CABLE
ADDITIONAL PARTS MAY BE REQUIRED TORETAIN OEM SUB. REFER TO VEHICLE WIRE CHART.
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda cr-v WitHout aMP not retaining oeM BluetootH 2012-2016
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda cr-v WitHout aMP not retaining oeM BluetootH 2012-2016
6 58 714 1316 15 2 14 310 911
18 1720 19212223
12
25 2427 262829303132
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
SWI 2 ~ ~ 32 pin 15 Yellow (DATA) Bluetooth unit, above glove box
Video + ~ ~ ~ 19 Red (+) MID
Video - ~ ~ ~ 03 White (-) MID
Bluetooth connector
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda cr-v WitHout aMP not retaining oeM BluetootH 2012-2016
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2012-2016Honda cr-v
WitHout aMP retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda cr-v WitHout aMP retaining oeM BluetootH 2012-2016
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda cr-v WitHout aMP retaining oeM BluetootH 2012-2016
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
To retain OEM sub, see instruction in vehicle wire chart (if applicable).
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
2
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda cr-v WitHout aMP retaining oeM BluetootH 2012-2016
2
AUXAUX
BB
AA
*
DDSUBSUB
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
WHITE /RED (NC)ORANGE/RED (NC)
MAESTRO RR MODULE
CUT AND REMOVE THE RCA JACKS
MAINHARNESS
HO2 T-HARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
ADDITIONAL PARTS MAY BE REQUIRED TORETAIN OEM SUB. REFER TO VEHICLE WIRE CHART.
FACTORY RADIO HARNESS
OBDII CONNECTOR
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED (NC)
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
STEP 1 STEP 4
STEP 5
STEP 2
STEP 3
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda cr-v WitHout aMP retaining oeM BluetootH 2012-2016
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda cr-v WitHout aMP retaining oeM BluetootH 2012-2016
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + ~ ~ ~ 19 Red (+) MID
Video - ~ ~ ~ 03 White (-) MID
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda cr-v WitHout aMP retaining oeM BluetootH 2012-2016
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2015-2018Honda Fit WitH 5" screen
Harness version 1,3 and BeloW
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda Fit WitH 5" screen Harness version 1,3 and BeloW 2015-2018
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda Fit WitH 5" screen Harness version 1,3 and BeloW 2015-2018
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Cut the male WHITE 2 pin connector from the HO2 T-Harness (version 1.3 and previous). Connect the BROWN/YELLOW wire to BLUE wire of connector C (pin 12). Connect the BROWN/RED wire to PINK wire of connector C (pin 24)
• Assemble the HO2 T-harness and connect it to the factory radio harness.
STEP 3
• Connect the White/Red wire to the Orange/Red wire.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the cameras RCA cables (if equipped with backup camera or lane departure cameras).
• Plug the Data cable to the data port of the aftermarket radio.
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
15
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda Fit WitH 5" screen Harness version 1,3 and BeloW 2015-2018
15
56710 341112
17
289
181920 1314151621222324
1
AUXAUX
BB
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM
C
**
DDSUBSUB
AA
MAESTRO RR MODULE
CUT AND REMOVE THE RCA JACKS
STEP 1
MAINHARNESS
HO2 T-HARNESS (VER. 1.3 AND -)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 5
STEP 6
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNA
BROWN/YELLOW
BROWN/RED
BLUE
PINK
PINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE (NC)
WHITE(REMOVE)
WHITE (CONNECT IF PRESENT)
BLACK
CONNECT IF EQUIPPED *
RED (NC)
NOT REQUIRED
STEERING WHEELCONTROL CABLE
STEP 4 OBDII CONNECTOR
WHITE /REDORANGE/RED
STEP 3
CONNECTOR C
AUDIOCABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda Fit WitH 5" screen Harness version 1,3 and BeloW 2015-2018
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda Fit WitH 5" screen Harness version 1,3 and BeloW 2015-2018
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda Fit WitH 5" screen Harness version 1,3 and BeloW 2015-2018
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2015-2018Honda Fit WitH 5" screen
Harness version 1,4 and HigHer
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda Fit WitH 5" screen Harness version 1,4 and HigHer 2015-2018
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda Fit WitH 5" screen Harness version 1,4 and HigHer 2015-2018
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
STEP 3
• Connect the White/Red wire to the Orange/Red wire.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the cameras RCA cables (if equipped with backup camera or lane departure cameras).
• Plug the Data cable to the data port of the aftermarket radio.
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
16
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda Fit WitH 5" screen Harness version 1,4 and HigHer 2015-2018
16
AUXAUX
BB
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM
C
**
DDSUBSUB
AA
MAESTRO RR MODULE
CUT AND REMOVE THE RCA JACKS
STEP 1
MAINHARNESS
HO2 T-HARNESS (VER. 1.4 AND +)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 5
STEP 6
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE (NC)
WHITE PURPLE
WHITE (NC)
BLACK
CONNECT IF EQUIPPED *
RED (NC)
NOT REQUIRED
STEERING WHEELCONTROL CABLE
STEP 4 OBDII CONNECTOR
WHITE /REDORANGE/RED
STEP 3
AUDIOCABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda Fit WitH 5" screen Harness version 1,4 and HigHer 2015-2018
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda Fit WitH 5" screen Harness version 1,4 and HigHer 2015-2018
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda Fit WitH 5" screen Harness version 1,4 and HigHer 2015-2018
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2015-2018Honda Fit WitH 7" screen
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda Fit WitH 7" screen 2015-2018
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda Fit WitH 7" screen 2015-2018
INSTALLATION INSTRUCTIONS Note: The OEM Bluetooth cannot be retained in this vehicle, as it is built into the factory radio.
STEP 1• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera or lane departure cameras that showed on the factory radio (NOT the MID), plug in connector C.
STEP 3• Connect the White/Red wire to the Orange/Red wire.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the cameras RCA cables (if equipped with backup camera or lane departure cameras).
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
1
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda Fit WitH 7" screen 2015-2018
1
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM
AUXAUX
BB
C
**
DDSUBSUB
AA
WHITE /REDORANGE/RED
MAESTRO RR MODULE
CUT AND REMOVE THE RCA JACKS
STEP 1
MAINHARNESS
HO2 T-HARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 5
STEP 6
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 4 OBDII CONNECTOR
STEP 3
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE (NC)
RED (NC)
BLACK
CONNECT IF EQUIPPED *
NOT REQUIRED
STEERING WHEELCONTROL CABLEAUDIO
CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda Fit WitH 7" screen 2015-2018
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda Fit WitH 7" screen 2015-2018
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda Fit WitH 7" screen 2015-2018
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2016-2019Honda Hr-v
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda Hr-v 2016-2019
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda Hr-v 2016-2019
INSTALLATION INSTRUCTIONS Note: The OEM Bluetooth cannot be retained in this vehicle, as it is built into the factory radio.
STEP 1• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera or lane departure cameras that showed on the factory radio (NOT the MID), plug in connector C.
STEP 3• Connect the White/Red wire to the Orange/Red wire.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the cameras RCA cables (if equipped with backup camera or lane departure cameras).
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
1
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda Hr-v 2016-2019
1
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM
AUXAUX
BB
C
**
DDSUBSUB
AA
WHITE /REDORANGE/RED
MAESTRO RR MODULE
CUT AND REMOVE THE RCA JACKS
STEP 1
MAINHARNESS
HO2 T-HARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 5
STEP 6
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 4 OBDII CONNECTOR
STEP 3
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE (NC)
RED (NC)
BLACK
CONNECT IF EQUIPPED *
NOT REQUIRED
STEERING WHEELCONTROL CABLEAUDIO
CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda Hr-v 2016-2019
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda Hr-v 2016-2019
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda Hr-v 2016-2019
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2016-2018Honda Hr-v WitH 5" screenHarness version 1,3 and BeloW
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda Hr-v WitH 5" screen Harness version 1,3 and BeloW 2016-2018
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda Hr-v WitH 5" screen Harness version 1,3 and BeloW 2016-2018
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Cut the male WHITE 2 pin connector from the HO2 T-Harness (version 1.3 and previous). Connect the BROWN/YELLOW wire to BLUE wire of connector C (pin 12). Connect the BROWN/RED wire to PINK wire of connector C (pin 24)
• Assemble the HO2 T-harness and connect it to the factory radio harness.
STEP 3
• Connect the White/Red wire to the Orange/Red wire.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the cameras RCA cables (if equipped with backup camera or lane departure cameras).
• Plug the Data cable to the data port of the aftermarket radio.
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
15
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda Hr-v WitH 5" screen Harness version 1,3 and BeloW 2016-2018
15
56710 341112
17
289
181920 1314151621222324
1
AUXAUX
BB
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM
C
**
DDSUBSUB
AA
MAESTRO RR MODULE
CUT AND REMOVE THE RCA JACKS
STEP 1
MAINHARNESS
HO2 T-HARNESS (VER. 1.3 AND -)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 5
STEP 6
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNA
BROWN/YELLOW
BROWN/RED
BLUE
PINK
PINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE (NC)
WHITE(REMOVE)
WHITE (CONNECT IF PRESENT)
BLACK
CONNECT IF EQUIPPED *
RED (NC)
NOT REQUIRED
STEERING WHEELCONTROL CABLE
STEP 4 OBDII CONNECTOR
WHITE /REDORANGE/RED
STEP 3
CONNECTOR C
AUDIOCABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda Hr-v WitH 5" screen Harness version 1,3 and BeloW 2016-2018
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda Hr-v WitH 5" screen Harness version 1,3 and BeloW 2016-2018
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda Hr-v WitH 5" screen Harness version 1,3 and BeloW 2016-2018
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2016-2018Honda Hr-v WitH 5" screenHarness version 1,4 and HigHer
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda Hr-v WitH 5" screen Harness version 1,4 and HigHer 2016-2018
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda Hr-v WitH 5" screen Harness version 1,4 and HigHer 2016-2018
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
STEP 3
• Connect the White/Red wire to the Orange/Red wire.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the cameras RCA cables (if equipped with backup camera or lane departure cameras).
• Plug the Data cable to the data port of the aftermarket radio.
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
16
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda Hr-v WitH 5" screen Harness version 1,4 and HigHer 2016-2018
16
AUXAUX
BB
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM
C
**
DDSUBSUB
AA
MAESTRO RR MODULE
CUT AND REMOVE THE RCA JACKS
STEP 1
MAINHARNESS
HO2 T-HARNESS (VER. 1.4 AND +)
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
STEP 5
STEP 6
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE (NC)
WHITE PURPLE
WHITE (NC)
BLACK
CONNECT IF EQUIPPED *
RED (NC)
NOT REQUIRED
STEERING WHEELCONTROL CABLE
STEP 4 OBDII CONNECTOR
WHITE /REDORANGE/RED
STEP 3
AUDIOCABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda Hr-v WitH 5" screen Harness version 1,4 and HigHer 2016-2018
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda Hr-v WitH 5" screen Harness version 1,4 and HigHer 2016-2018
VEHICLE WIRE REFERENCE CHART
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda Hr-v WitH 5" screen Harness version 1,4 and HigHer 2016-2018
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2014-2017Honda odyssey
Base
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda odyssey Base 2014-2017
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda odyssey Base 2014-2017
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the cameras RCA cables (if equipped with backup camera or lane departure cameras).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
To retain OEM sub, see instruction in vehicle wire chart (if applicable).
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
18
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda odyssey Base 2014-2017
18
BB
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM
C
**
AUXAUX
DDSUBSUB
*
AA
MAESTRO RR MODULE
STEP 1
HO2 T-HARNESS
STEP 4
STEP 5
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 3 OBDII CONNECTOR
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)(NC)
GREENWHITE
GREEN (NC)
WHITE (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
RED (NC)
CUT AND REMOVE THE RCA JACKS
MAINHARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
WHITE /RED (NC)ORANGE/RED (NC)
NOT REQUIRED
STEERING WHEELCONTROL CABLE
ADDITIONAL PARTS MAY BE REQUIRED TORETAIN OEM SUB. REFER TO VEHICLE WIRE CHART.WHITE
BLACK
CONNECT IF EQUIPPED *
PIONEER RADIO: ENSURE THAT NOTHINGIS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda odyssey Base 2014-2017
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda odyssey Base 2014-2017
VEHICLE WIRE REFERENCE CHART
In order to retain OEM subwoofer, it must be powered by an aftermarket amplifi er.
*Vehicle without navigation, without touch screen. MID cannot be retained.
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
11 10
24 23
113 12
22 21 20 314
2
46 58 79
16 1518 1719
SUB (-) - LTBLUEAFTERMARKET
AMPLIFIERRADIO
SUB (+) - BROWN
OEM SUBWOOFER CONNECTORAT ANC MODULE BEHIND GLOVE BOX
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda odyssey Base 2014-2017
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2011-2013Honda odyssey
not retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda odyssey not retaining oeM BluetootH 2011-2013
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda odyssey not retaining oeM BluetootH 2011-2013
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Connect the Orange/Red wire at the Bluetooth module. See
the vehicle wire reference chart for wire color and location.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
To retain OEM sub, see instruction in vehicle wire chart (if applicable).
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
10
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda odyssey not retaining oeM BluetootH 2011-2013
10
AUXAUX
BB
DDSUBSUB
*
AA
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
MAESTRO RR MODULE
STEP 1
HO2 T-HARNESS
STEP 5
STEP 6
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 4
STEP 3
OBDII CONNECTOR
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
BLUETOOTH UNIT
WHITE
RED (NC)
CUT AND REMOVE THE RCA JACKS
MAINHARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
WHITE /RED (NC)
ORANGE/RED
UNPLUG BLUETOOTH MODULE
SEE WIRE CHARTSWI 2SWI 2
NOT REQUIRED
STEERING WHEELCONTROL CABLE
ADDITIONAL PARTS MAY BE REQUIRED TORETAIN OEM SUB. REFER TO VEHICLE WIRE CHART.
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda odyssey not retaining oeM BluetootH 2011-2013
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda odyssey not retaining oeM BluetootH 2011-2013
65 87 1413 161521 43 109 11
1817 2019 21 22 23
12
2524 2726 28 29 30 31 32
VEHICLE WIRE REFERENCE CHART
In order to retain OEM subwoofer, it must be powered by an aftermarket amplifi er.
5 6 7
10
3 4
11 12 13
2 8
9 14 15 16
1
SUB (-) - LTBLUE
AFTERMARKETAMPLIFIER
RADIOSUB (+) - BROWN
OEM SUBWOOFER CONNECTORBEHIND RADIO
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
SWI 2 ~ ~ 32 pin 02 LtGreen (DATA) Bluetooth unit, in dash between radio and glove box
Bluetooth connector
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda odyssey not retaining oeM BluetootH 2011-2013
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2011-2013Honda odyssey
retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda odyssey retaining oeM BluetootH 2011-2013
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda odyssey retaining oeM BluetootH 2011-2013
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
To retain OEM sub, see instruction in vehicle wire chart (if applicable).
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
2
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda odyssey retaining oeM BluetootH 2011-2013
2
AUXAUX
BB
AA
*
DDSUBSUB
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
WHITE /RED (NC)ORANGE/RED (NC)
MAESTRO RR MODULE
CUT AND REMOVE THE RCA JACKS
MAINHARNESS
HO2 T-HARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
ADDITIONAL PARTS MAY BE REQUIRED TORETAIN OEM SUB. REFER TO VEHICLE WIRE CHART.
FACTORY RADIO HARNESS
OBDII CONNECTOR
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED (NC)
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
STEP 1 STEP 4
STEP 5
STEP 2
STEP 3
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda odyssey retaining oeM BluetootH 2011-2013
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda odyssey retaining oeM BluetootH 2011-2013
VEHICLE WIRE REFERENCE CHART
In order to retain OEM subwoofer, it must be powered by an aftermarket amplifi er.
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
5 6 7
10
3 4
11 12 13
2 8
9 14 15 16
1
SUB (-) - LTBLUE
AFTERMARKETAMPLIFIER
RADIOSUB (+) - BROWN
OEM SUBWOOFER CONNECTORBEHIND RADIO
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda odyssey retaining oeM BluetootH 2011-2013
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2009-2011Honda Pilot
Base
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda Pilot Base 2009-2011
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda Pilot Base 2009-2011
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
To retain OEM sub, see instruction in vehicle wire chart (if applicable).
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
2
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda Pilot Base 2009-2011
2
AUXAUX
BB
AA
*
DDSUBSUB
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
WHITE /RED (NC)ORANGE/RED (NC)
MAESTRO RR MODULE
CUT AND REMOVE THE RCA JACKS
MAINHARNESS
HO2 T-HARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
ADDITIONAL PARTS MAY BE REQUIRED TORETAIN OEM SUB. REFER TO VEHICLE WIRE CHART.
FACTORY RADIO HARNESS
OBDII CONNECTOR
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED (NC)
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
STEP 1 STEP 4
STEP 5
STEP 2
STEP 3
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda Pilot Base 2009-2011
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda Pilot Base 2009-2011
VEHICLE WIRE REFERENCE CHART
In order to retain OEM subwoofer, it must be powered by an aftermarket amplifi er.
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
5 6
7 10
73 4
11 12 13 142
1
8
SUB (-) - REDAFTERMARKET
AMPLIFIERRADIO
SUB (+) - WHITE
OEM SUBWOOFER CONNECTORBEHIND RADIO
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda Pilot Base 2009-2011
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2012-2015Honda Pilot
not retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda Pilot not retaining oeM BluetootH 2012-2015
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda Pilot not retaining oeM BluetootH 2012-2015
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Connect the Orange/Red wire at the Bluetooth module. See
the vehicle wire reference chart for wire color and location.
STEP 4• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 5• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
To retain OEM sub, see instruction in vehicle wire chart (if applicable).
STEP 6• Connect all the harnesses to the Maestro RR module then
test your installation.
10
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda Pilot not retaining oeM BluetootH 2012-2015
10
AUXAUX
BB
DDSUBSUB
*
AA
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
MAESTRO RR MODULE
STEP 1
HO2 T-HARNESS
STEP 5
STEP 6
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 4
STEP 3
OBDII CONNECTOR
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
BLUETOOTH UNIT
WHITE
RED (NC)
CUT AND REMOVE THE RCA JACKS
MAINHARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
WHITE /RED (NC)
ORANGE/RED
UNPLUG BLUETOOTH MODULE
SEE WIRE CHARTSWI 2SWI 2
NOT REQUIRED
STEERING WHEELCONTROL CABLE
ADDITIONAL PARTS MAY BE REQUIRED TORETAIN OEM SUB. REFER TO VEHICLE WIRE CHART.
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda Pilot not retaining oeM BluetootH 2012-2015
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda Pilot not retaining oeM BluetootH 2012-2015
65 87 1413 161521 43 109 11
1817 2019 21 22 23
12
2524 2726 28 29 30 31 32
VEHICLE WIRE REFERENCE CHART
In order to retain OEM subwoofer, it must be powered by an aftermarket amplifi er.
5 6 7
10
3 4
11 12 13
2 8
9 14 15 16
1
SUB (-) - RED
AFTERMARKETAMPLIFIER
RADIOSUB (+) - WHITE
OEM SUBWOOFER CONNECTORBEHIND RADIO
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
SWI 2 ~ ~ 32 pin 02 White (DATA) Bluetooth unit, center console passenger side
Bluetooth connector
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda Pilot not retaining oeM BluetootH 2012-2015
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2012-2015Honda Pilot
retaining oeM BluetootH
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda Pilot retaining oeM BluetootH 2012-2015
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda Pilot retaining oeM BluetootH 2012-2015
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Cut the WHITE, GRAY, GREEN and PURPLE RCA tips.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
• If the vehicle is equipped with a backup camera in the MID, see the vehicle wire reference chart for wiring information.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
To retain OEM sub, see instruction in vehicle wire chart (if applicable).
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
2
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda Pilot retaining oeM BluetootH 2012-2015
2
AUXAUX
BB
AA
*
DDSUBSUB
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
WHITE /RED (NC)ORANGE/RED (NC)
MAESTRO RR MODULE
CUT AND REMOVE THE RCA JACKS
MAINHARNESS
HO2 T-HARNESS
WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)
PURPLE/BLACK - RR SPEAKER (-)
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
PURPLE - RR SPEAKER (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
WIRING DIAGRAM
WIRES FROMVEHICLE
ADDITIONAL PARTS MAY BE REQUIRED TORETAIN OEM SUB. REFER TO VEHICLE WIRE CHART.
FACTORY RADIO HARNESS
OBDII CONNECTOR
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
WHITE
RED (NC)
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
STEP 1 STEP 4
STEP 5
STEP 2
STEP 3
NOT REQUIRED
STEERING WHEELCONTROL CABLE
PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda Pilot retaining oeM BluetootH 2012-2015
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda Pilot retaining oeM BluetootH 2012-2015
VEHICLE WIRE REFERENCE CHART
In order to retain OEM subwoofer, it must be powered by an aftermarket amplifi er.
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
5 6 7
10
3 4
11 12 13
2 8
9 14 15 16
1
SUB (-) - RED
AFTERMARKETAMPLIFIER
RADIOSUB (+) - WHITE
OEM SUBWOOFER CONNECTORBEHIND RADIO
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda Pilot retaining oeM BluetootH 2012-2015
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.
E L E C T R O N I C S
Click here for: Radar Installation Guides
2009-2011Honda Pilot
WitH aMP
INSTALL GUIDE
RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.
PRODUCTS REQUIREDiDatalink Maestro RR or RR2 Radio Replacement InterfaceiDatalink Maestro HO2 Installation Harness
PROGRAMMED FIRMWAREADS-RR(SR)-HON02-DS
ADDITIONAL RESOURCESMaestro RR2 Programmable Outputs Guide
OR
OPTIONAL ACCESSORIES
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 2
Honda Pilot WitH aMP 2009-2011
WELCOME
NEED HELP?
Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.
TABLE OF CONTENTS
Installation Instructions 3
Wiring Diagram 4
Radio Wire Reference Chart 5
Vehicle Wire Reference Chart 6
Troubleshooting Table 7
1 866 427-2999
maestro.idatalink.com/supportwww.12voltdata.com/forum
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 3
Honda Pilot WitH aMP 2009-2011
INSTALLATION INSTRUCTIONS STEP 1
• Unbox the aftermarket radio and locate its main harness.
• Connect the wires from aftermarket radio main harness to the HO2 T-harness and match the wire functions.
• Remove the factory radio.
STEP 2
• Assemble the HO2 T-harness and connect it to the factory radio harness.
STEP 3• Plug the OBDII connector into the OBDII of the vehicle,
under driver dash.
STEP 4• Plug the aftermarket radio harnesses into the aftermarket
radio.
• Connect the speakers RCA cables.
• Plug the AUX cable to the aftermarket radio (if the vehicle is equipped with an OEM aux port).
• Plug the Data cable to the data port of the aftermarket radio.
• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.
Note : When using a Pioneer or Alpine radio, the audio cable will plug into the AUX port.
To retain OEM sub, see instruction in vehicle wire chart (if applicable).
STEP 5• Connect all the harnesses to the Maestro RR module then
test your installation.
17
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 4
Honda Pilot WitH aMP 2009-2011
17
AUXAUX
BB
DDSUBSUB
*
AA
BACKUP CAMBACKUP CAM
LANE WATCH CAMLANE WATCH CAM C
MAESTRO RR MODULE
STEP 1
HO2 T-HARNESS
STEP 4
STEP 5
WIRING DIAGRAM
WIRES FROMVEHICLE
FACTORY RADIO HARNESSSTEP 2
STEP 3 OBDII CONNECTOR
DATACABLE
AUDIOCABLE
CONNECT TOAFTERMARKET RADIO
BLUE (NC)
GREEN
WHITE
BLACK (NC)
* READ NOTE ININSTALLATION
INSTRUCTIONSSECTION
WHITE
RED (NC)
WHITE /RED (NC)ORANGE/RED (NC)
NOT REQUIRED
STEERING WHEELCONTROL CABLE
ADDITIONAL PARTS MAY BE REQUIRED TORETAIN OEM SUB. REFER TO VEHICLE WIRE CHART.
MAINHARNESS
YELLOW - 12V (+)
BLACK - GROUNDRED - ACCESSORY (+)
BLUE/WHITE - AMP. TURN ON (+)
ORANGE - ILLUMINATION (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)
BLUE - POWER ANTENNAPINK - VEHICLE SPEED
SEE RADIO WIREREFERENCECHARTFOR RADIO WIRECOLORS
WHITEWHITE/BLACKGRAYGRAY/BLACKGREENGREEN/BLACK
PURPLE/BLACKPURPLE
LF RCA INPUT
RF RCA INPUT
LR RCA INPUT
RR RCA INPUT
RCA CABLES PIONEER RADIO:ENSURE THAT NOTHING
IS PLUGGED IN W/R PORT.
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 5
Honda Pilot WitH aMP 2009-2011
RADIO WIRE REFERENCE CHART
WireDescription Polarity Wire Color on Maestro
T-HarnessWire Color on Alpine
cableWire Color on Kenwood
cableWire Color on Pioneer
cableWire Color on Sony
cable
Illumination (+) Orange N/A Orange/White Orange/White Orange
Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White
E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green
VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A
Power Antenna (+) Blue Blue Blue N/A N/A
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 6
Honda Pilot WitH aMP 2009-2011
VEHICLE WIRE REFERENCE CHART
In order to retain OEM subwoofer, it must be powered by an aftermarket amplifi er.
WireDescription
Connector Name
ConnectorColor
ConnectorType Position Wire Color Polarity Wire
Location
Video + n/a n/a n/a n/a n/a n/a n/a
Video - n/a n/a n/a n/a n/a n/a n/a
5 6
7 10
73 4
11 12 13 142
1
8
SUB (-) - REDAFTERMARKET
AMPLIFIERRADIO
SUB (+) - WHITE
OEM SUBWOOFER CONNECTORBEHIND RADIO
ADS-RR(SR)-HON02-DS-IG-EN maestro.idatalink.comAutomotive Data Solutions Inc. © 2019 7
Honda Pilot WitH aMP 2009-2011
TROUBLESHOOTING TABLE
PROBLEM SOLUTION
Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the vehicle. If you hardwired connections at the OBDII, check connections at the OBDII connector. Make sure the BROWN/RED wire is on PIN 6 and the BROWN/YELLOW wire is connected to PIN 14 of the OBDII connector. Do not use T-Taps. Soldering or military splicing methods are recommended.Reset the RR.
The lanewatch camera does not activate with the turn signal. Ensure it is turned ON in the OEM Setup of the radio menus.The lane watch camera needs to be active, and the 'ON with turn signal' setting needs to be set to ON.
The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and that it is plugged into the black port on the Maestro RR. The red and blue ports on the RR should be empty.
Make sure the correct radio model and serial number were entered during the fl ash. Verify the radio’s serial number entered during the fl ash matches what is listed on the radio screen. This can be found in the settings of the radio, listed as Device Id, Device Number, or Serial Number.
The light on the Maestro is fl ashing RED ONCE. There is no fi rmware on the module; fl ash the RR module.
MAESTRO RR RESET PROCEDURE:
Turn the key to the OFF position, then disconnect all connectors from the module.Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds).Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.
TECHNICAL ASSISTANCE
Phone: 1-866-427-2999
Email: [email protected]
Web: maestro.idatalink.com/support add www.12voltdata.com/forum/
IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest fi rmware from the manufacturer. Please visit the radio manufacturer’s website and look for any updates pertaining to your radio.