Upload
phamthien
View
242
Download
1
Embed Size (px)
Citation preview
How to select a door closer
East – Pennsylvania800-233-4210Fax 800-854-4146
Midwest – Missouri800-211-4607Fax 800-211-4608
Southwest – Texas866-693-6903Fax 866-693-6904
West – Nevada800-722-4210Fax 800-248-3620
www.topnotchinc.com [email protected]
179
Concealed or surface mounted closers: Door closers areavailable in two styles - concealed or surface mounted. In choosing a closer style for a particular application,consideration should be given to the type of door beingcontrolled, frame conditions, aesthetic requirements, andcontrol features needed. Information contained in thefollowing material can serve as a guide in selecting the styleand model of closer to meet specific requirements.
If concealed, where?Closers concealed in the head frame over the door are out of sight and entirely out of the pedestrians way. They cannotbe harmed by scrub water, cleaning chemicals or floor dirt,and are protected from airborne contaminant's, like dust.They are easy to reach for regulation without removing anyparts. Closers for frame sections as thin as 13/4" (44mm) areavailable.
Closers located within the door itself are also hidden andprotected. On interior doors of common sizes they do an excellent job, yet they cost little more than surface applied closers.
Surface mounted closers - location?Closer location is subject to the considerations ofpracticality and appearance. Good taste usually decreesthat closers on doors along a corridor be located on theroom side of the door so they are out of the line of sightfrom the corridor. Closers should be placed on the inside ofexterior doors for appearance and to shelter them from theelements.
Where are heavy duty closers required?Heavy duty closers should always be used in these places:
• Schools or public buildings where hard usage is expected.
• Exterior doors.
• Doors subject to draft, wind, or air pressuredifferential.
• High frequency doors such as those on departmentstores, malls, or mixed use tenancies.
Hand of a door?Some door closers are handed.When approaching a door fromthe push side, if hinged on theleft, it is a left hand door; ifhinged on the right, it is a righthand door.
For purposes of handing door closers, right hand reversebevel and left hand are identical. Also, left hand reversebevel and right hand are identical. The hand of the closeris the same as the hand of the door for all except cornerbracket installations that require a closer handed oppositethe hand of the door.
Which arm system?Double lever arm closers can provide control under difficultconditions for either interior or exterior doors. A parallelarm system is a type of double lever arm where the mainarm is parallel to the face of the closed door. Functionsavailable in double lever arm systems are:
CONCEALED IN DOOR
CONCEALED IN FRAME
HINGE (PULL) SIDE MOUNT
PARALLEL ARM (PUSH SIDE) MOUNT
TOP JAMB (PUSH SIDE) MOUNT
CONCEALED IN 1 3/4" TUBE
REGULAR (REG)
FUSIBLE LINK(FL)
HOLD-OPEN (H)
CUSH-N-STOP(CUSH)
EXTRA DUTY(EDA)
SPRING CUSH(SCUSH)
SPRING HOLD-OPENCUSH (SHCUSH)
HOLD-OPENEXTRA DUTY (HEDA)
HOLD-OPENCUSH-N-STOP (HCUSH)
Finishes
East – Pennsylvania800-233-4210Fax 800-854-4146
Midwest – Missouri800-211-4607Fax 800-211-4608
Southwest – Texas866-693-6903Fax 866-693-6904
West – Nevada800-722-4210Fax 800-248-3620
www.topnotchinc.com [email protected]
180
LCN closers, pivots, and power operators can be specified in sevenstandard or more than 150 custom powder-coated finishes. Powdercoating provides superior protection against the effects of weatheringand provides a durable, chip-resistant finish. For information aboutcustom finishes, plated finishes and our special rust-inhibiting (SRI)process, call.
Standard powder-coated finishesAL (B.H.M.A. 689) AluminumDKBRNZ (B.H.M.A. 695) Dark bronzeTAN (B.H.M.A. 692) TanSTAT (B.H.M.A. 690) StatuaryLTBRZ (B.H.M.A. 691) Light bronzeBLACK (B.H.M.A. 693) BlackBRASS (B.H.M.A. 696) Brass
Optional SRI
When powder-coated closers are installed in high humidity orpotentially corrosive installations like swimming pools, water treatmentfacilities or near large bodies of water, specify LCN SRI Pretreatment.This optional process extends the corrosion protection offered bypowder-coated finishes.
Custom powder-coated finishes
• 180 custom finishes.
• Durable and chip resistant.
• Superior appearance.
• Corrosion resistant.
• Environmentally friendly process.
• Match doors, frames and hardware.
Plated Finishes
U.S. Finish B.H.M.A. Finish Description 3 632 Bright brass4 633 Satin brass9 637 Bright bronze10 639 Satin bronze10B 640 Satin bronze, oxidized and oil rubbed14 645 Nickel plated, bright (polished brass, nickel plated)15 646 Nickel plated, satin19 631 Satin black (black lacquer)20 649 Bright bronze (oxidized)26 651 Bright chrome 26D 652 Satin chrome
1260 Series
East – Pennsylvania800-233-4210Fax 800-854-4146
Midwest – Missouri800-211-4607Fax 800-211-4608
Southwest – Texas866-693-6903Fax 866-693-6904
West – Nevada800-722-4210Fax 800-248-3620
www.topnotchinc.com [email protected]
181
Commercial closer for office buildings, hotels,manufacturing facilities, retail and other light commericialuses
The 1260 is an intergral component of a safe, secure andstrong door system. This cast iron closer delivers smoothclosing and a stronger overall door system. The choice ofcylinder sizes, optional arms, installation accessories, andease of installation offer a versatile solution to door controlin low to moderate traffic in both interior and exterior.
1260 SERIES
The 1260 Series is UL- and ULC-listed for self-closing doors without hold-open. Tested and certified under ANSI Standard A156.4, grade one.
• Size 1-5 closing power.
• Adjustable backcheck.
• Standard 1260 SERIES closer shipped with regular (non-hold-open) arm, a shaft cover, and selfreaming and tapping screws.
• Sized cylinders for interior doors to 4'6" and exterior doors to 3'6".
• Closer mounts hinge side, top jamb, and parallel armon either right- or left-swinging doors.
• 1260 meets ADA requirements.
®
1260-18
1260-18PA
Options:
• 1260-72 non-handed plastic slim line cover.
• 1260-18 drop plate is required for hinge side mount where top rail isless than 21/2" (64 mm). Also required for top jamb mounting where head frame is less than 13/4" (44 mm) or flush ceiling conditionexists. Plate requires minimum 11/2" (38 mm) minimum top rail or11/4” (32 mm ) head frame.
• 1260-18PA drop plate is required for parallel arm mounting where toprail is less than 43/8" (111 mm), measured from the stop. Platerequires minimum 13/4" (44 mm) minimum top rail.
• 1260-3077 non-handed arm mounts hinge side or top jamb.
• 1260-3049 non-handed arm mounts hinge side, top jamb or parallelarm (62PA required). Hold-open adjustable at shoe.
1260-72
Top Jamb (Pull Side) Mounting
1260-30771260-3049
1460 Series
East – Pennsylvania800-233-4210Fax 800-854-4146
Midwest – Missouri800-211-4607Fax 800-211-4608
Southwest – Texas866-693-6903Fax 866-693-6904
West – Nevada800-722-4210Fax 800-248-3620
www.topnotchinc.com [email protected]
182
Surface-mounted closers
Slimline design for narrow head frames and top rails. Cast iron cylinderfor exceptional service life. UL-listed for use on fire-rated doors. All-weather hydraulic fluid eliminates seasonal adjustments. 10-yearwarranty.
ADA: Size 1 closer meets 5.0 lbs. opening force requirements on interiordoors.
®
1460/1461 SERIES
• Metal Designer Series or standard cover. • Mountings: Pull side, top jamb and parallel arm.
• Non-handed, non-sized. Size 1 to 6. • Interior doors to 5'0", exterior doors to 4'0".
• Fast, accurate installation. • Delay action (optional) provides additional time for people to move through the door. 1461 only.
• Spring poser of a 1461 cylinder for exterior doors to 48” (1219 mm) and interior doors to 60” (1524 mm).Hinge (Pull Side) Mounting Top Jamb (Push Side) Mounting Parallel Arm (Push Side) Mounting
Cush Mounting EDA Mounting
CUSH arms can be templatedfor maximum opening/hold-open point at
85°: A = 23/8” (60 mm)B = 99/16” (243 mm)
90°: A = 15/8” (41 mm)B = 91/16” (230 mm)
100°: A = 5/8” (16 mm)B = 81/16” (205 mm)
1460 Series
East – Pennsylvania800-233-4210Fax 800-854-4146
Midwest – Missouri800-211-4607Fax 800-211-4608
Southwest – Texas866-693-6903Fax 866-693-6904
West – Nevada800-722-4210Fax 800-248-3620
www.topnotchinc.com [email protected]
183
Surface-mounted closers
1460 SERIES
Options:
• 1460-3077 regular non-handed arm mounts side or top jamb.
• 1460-62PA required for parallel arm mounting.
• 1460-3077L long non-handed arm includes long rod and shoe 1460-79LR for top jamb mount with deep reveal.
• 1460-3049 hold-open non-handed arm mounts hinge side, top jamb or parallel arm (62PA required). Hold-open adjustable at shoe.
• 1460-3077EDA Extra duty non-handed parallel arm features solid forged steel main and forearm for potentially abusive installations.
• 1460-3077CNS CUSH-N-STOP non-handed parallel arm features solid forged steel main arm and forearm with stop in soffit shoe.
• 1460-3049CNS HCUSH non-handed arm, provides hold-open function with templated stop/hold-open points. Handle controls hold-open function.
• 1460-72 non-handed plastic slim line cover with feature strip.
• 1460-18 drop plate is required for hinge side mount where top rail is less than 21/2" (64 mm). Also required for top jamb mountingwhere head frame is less than 13/4" (44 mm) or flush ceiling condition exists. Plate requires minimum 11/2" (38 mm) top rail or 11/4" (32 mm) head frame.
• 1460-18PA drop plate is required parallel arm mounting wheretop rail is less than 43/8" (111 mm), measured from the stop. Platerequires minimum 13/4" (44 mm) top rail.
• 1461-3071 standard, non-handed cast iron cylinder assembly.
1460-18
1460-18PA
1460-79LR
1460-3077CNS
1460-3077EDA
1460-62PA
1460-3049CNS
1461-3071
1461T-3038
1461-3071
1460 Series
East – Pennsylvania800-233-4210Fax 800-854-4146
Midwest – Missouri800-211-4607Fax 800-211-4608
Southwest – Texas866-693-6903Fax 866-693-6904
West – Nevada800-722-4210Fax 800-248-3620
www.topnotchinc.com [email protected]
184
SURFACE-MOUNTED CLOSERS
The 1461T SUPER STOCK® is a slimline, single-lever (track) arm closer designed for interior use on narrow headframes and top rails. The modern styling and small projection make it an excellent choice for interior doors.
1461T SERIES
The 1461T SERIES is UL- and ULC-listed for self-closing doors without hold-open. Tested and certified under ANSI StandardA156.4, grade one.Comes with the following:
• 1461T-72 non-handed plastic slim line cover with feature strip.
• 1461T-3077T non-handed single lever arm mounts hinge side, top jamb, or stop face. Track roller not included with arm.
• 1461T-3038 standard non hold-open, non-handed track mounts on either side of the door. Will accept hold-open clipand/or bumper assembly.
• 1461T-3034 quiet, low friction track roller assembly. Shoulder dimension “X” = 1/8” (3 mm).
Options:
• 1461-3071 standard, non-handed cast iron cylinder assembly.
®
Hinge (Pull Side) Mounting Top Jamb (Pull Side) Mounting Stop Face (Push Side) Mounting
1461T-3034
1461T-72
1461T-3077T
2000 and 5000 Series ConcealedMounted in Head Frame and Top Door Rail
East – Pennsylvania800-233-4210Fax 800-854-4146
Midwest – Missouri800-211-4607Fax 800-211-4608
Southwest – Texas866-693-6903Fax 866-693-6904
West – Nevada800-722-4210Fax 800-248-3620
www.topnotchinc.com [email protected]
185
2014 SERIES
The concealed 2014 Series is a heavy-duty closer designed toprovide complete concealment. The single-lever arm and rollerassembly provide smooth, quiet door control and the choice offinishes and track functions meet virtually all architectural requirements.
The 2014 SERIES is UL-listed for self-closing doors without hold-open. Tested and certified under ANSI Standard A156.4.
For interior or exterior doors. Single-acting cylinder in head frame.Concealed arm and track in door top rail.
• Overhead concealed closer.
• Application-specific closers are designed to provide optimized door control for a specific mounting.
• Aluminum frame requires minimum 4" x 4" tube.
• Arms: Optional hold-open.
• Handed for right- or left-swinging doors.
®
The concealed 2034/2035 SERIES Pacer ® is a heavy-duty closerdesigned to fit in a narrow 13/4" aluminum transom. The single-leverarm and roller assembly provide smooth, quiet door control and thechoice of finishes and track functions meet virtually all architecturalrequirements.
2034/2035 SERIES
The 2034/2035 SERIES is UL-listed for self-closing doors,without hold-open. Tested and certified under ANSIStandard A156.4. 2034/2035 SERIES closer using 420 FireShield®, hollow metal frame, and 20-minute labeled wooddoor preparation meet; ASTM E-152, UL 10B, UBC 43.2,and Canadian Standard 4-S-104.
• Overhead concealed closer.
• Application-specific closers are designed to provideoptimized door control for a specific mounting.
• Designed to fit in a narrow 13/4" aluminum transom.
• Arms: Single- and double-acting, optional hold-open.
®
3000 Series Concealed Mounted in Head Frame and Top Door Rail
East – Pennsylvania800-233-4210Fax 800-854-4146
Midwest – Missouri800-211-4607Fax 800-211-4608
Southwest – Texas866-693-6903Fax 866-693-6904
West – Nevada800-722-4210Fax 800-248-3620
www.topnotchinc.com [email protected]
186
The concealed 3133 SERIES is designed tomount in a 13/4" interior door. The single-leverarm and roller assembly provides completeconcealment and the choice of finishes andtrack functions meet virtually all architecturalrequirements.
3133 SERIES
The 3133 Series is UL- and ULC-listedwithout hold-open for self-closing doors.Tested and certified under ANSI StandardA156.4, grade one.
For interior doors.
Single-acting cylinder and standard arm intop rail of door. Concealed track in headframe.
• Concealed in-door closer.
• Application-specific closers are designedto provide optimized door control for aspecific mounting.
• Designed to mount in a 13/4" interior door.
• Handed for right- or left-swinging doorsand sized cylinders.
• Single-acting doors.
• Arms: Optional hold-open track, regulartrack with bumper or hold-open trackwith bumper.
Opions:
• 3130-3054 hold open clip that mounts intrack to provide hold-open function. Hold-open point controled by clip location.
®
3130-3054
4000 Series
East – Pennsylvania800-233-4210Fax 800-854-4146
Midwest – Missouri800-211-4607Fax 800-211-4608
Southwest – Texas866-693-6903Fax 866-693-6904
West – Nevada800-722-4210Fax 800-248-3620
www.topnotchinc.com [email protected]
187
Heavy-duty, surface-mounted closers
• Heavy-duty cast iron cylinder for exceptional service life.UL- listed for use on fire-rated doors.
• All-weather hydraulic fluid eliminates seasonaladjustments.
• 10-year warranty.
ADA: Size 1 closer provides less than 5.0 lbs. opening force on 36" wide door.
4010/4011/4016 SERIES
• Interior doors to 5'0".Exterior doors to 4'0".
• Non-sized cylinder adjustable for interior doors to 4'6" andexterior doors to 3'6".
• Delay action. 4011 only.
• Tested to over 10 million cycles to reduce replacement and long-term costs.
• Track version available.
Options:
• 4010-72 standard, non-handed plastic cover.
• 4010-3077 regular non-handed arm.
• 4010-3049 hold-open handed arm provides hold-open function, adjustable at elbow.
• 4010-18 drop plate is required where top rail is less than 33/4"(95mm). Plate requires minimum 2" (51mm)top rail.
• 4010-11 corner bracket for doors where top jamb or parallelarm mounted closer can not be used. Allows 180° openingwith regular arm. Projects 5” (127 mm) from stop, 1311/16” (348mm) from frame. Requires opposite hand closer.
• 4010-16 corner bracket for doors where top jamb or parallel arm mounted closer can not be used. Allows 125° opening with regular arm or 100° with hold-open arm. Projects 5” (127 mm) from stop, 1213/16” (325 mm) from frame. Requires opposite hand closer.
4010-18
®
4010 EDA Shown
Hinge (Pull Side) Mounting
4010-72
4010-3077
4010-3049
4010-11
4010-16
4000 Series
East – Pennsylvania800-233-4210Fax 800-854-4146
Midwest – Missouri800-211-4607Fax 800-211-4608
Southwest – Texas866-693-6903Fax 866-693-6904
West – Nevada800-722-4210Fax 800-248-3620
www.topnotchinc.com [email protected]
188
Heavy-duty, surface-mounted closers
• Heavy-duty cast iron cylinder for exceptional service life.UL-listed for use on fire-rated doors.
• All-weather hydraulic fluid eliminates seasonal adjustments.
• 10-year warranty.
ADA: Size 1 closer provides less than 5.0 lbs. opening force on 36” widedoor.
4110/4111 SERIES
• Interior doors to 5’0”.Exterior doors to 4’0”.
• Non-sized cylinder adjustable for interior doors to 4’6” and exterior doors to 3’6”.
• Delay action. 4111 only.
• Tested to over 10 million cycles to reduce replacement and long-term costs.
• Advanced variable backcheck.. 4111 only.
• LCN FAST™ Power Adjust, a revolutionary visual indicator for spring power adjustment. 4111 only.
Options:
• 4110-3077EDA extra duty non-handed parallel arm features forged, solid steel main and forearm for potentially abusive installations.
• 4110-3077CNS CUSH-N-STOP handed parallel arm features solid forged steel main arm and forearm with built-in stop in soffit shoe.
4110 EDA shown
Parallel Arm (Push Side) Mounting
4110-3077EDA
4110-3077CNS
4000 Series
East – Pennsylvania800-233-4210Fax 800-854-4146
Midwest – Missouri800-211-4607Fax 800-211-4608
Southwest – Texas866-693-6903Fax 866-693-6904
West – Nevada800-722-4210Fax 800-248-3620
www.topnotchinc.com [email protected]
189
Heavy-duty, surface-mounted closers
4110/4111 SERIES
Options:
• 4110-3049CNS HOLD-CUSH handed arm provides hold-open function with templated stop/hold-open points. Handle controls hold-open function.
• 4111-SC SPRING CUSH non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit soffit shoe.
• 4111-HSC SPRING HOLD-CUSH non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe. Handle controls hold-open function.
• 4110-18 required for push side mount where top rail is less than 51/8” (130 mm), measured from the stop. Plate requires minimum 2” (51 mm) minimum top rail. Plate also used with CUSH arm installations.
4110-3049CNS
4110-18
4111-HSC
4111-SC
Heavy-duty, SMOOTHEE® closers
• Heavy-duty cast iron cylinder for exceptional service life. UL-listed for use on fire-rated doors.
• All-weather hydraulic fluid eliminates seasonal adjustments.
4013T SERIES
• Standard 4010T series closer shipped with standard arm, standard track, track roller, standard plastic cover, and self reaming and tapping screws.
• Interior doors to 4’0”.
• Closer mounts hinge side, specify right or left swinging door.
• Fast, accurate installation.
4000 Series
East – Pennsylvania800-233-4210Fax 800-854-4146
Midwest – Missouri800-211-4607Fax 800-211-4608
Southwest – Texas866-693-6903Fax 866-693-6904
West – Nevada800-722-4210Fax 800-248-3620
www.topnotchinc.com [email protected]
190
4030 shown
4031 Series
• Application-specific closers are designed to provide optimizeddoor control for a specific mounting configuration:
• Interior doors to 4'0".
Note: 4031 SERIES is not recommended for use on exterior doors.
Options:
• 4031-3077 regular non-hand arm.
• 4031-3049 hold-open handed arm provides hold open function, adjustable at elbow.
4031-3049
4031-3077
4000 Series
East – Pennsylvania800-233-4210Fax 800-854-4146
Midwest – Missouri800-211-4607Fax 800-211-4608
Southwest – Texas866-693-6903Fax 866-693-6904
West – Nevada800-722-4210Fax 800-248-3620
www.topnotchinc.com [email protected]
191
The 4040/4041 SUPER SMOOTHEE® is a heavy-duty, double-lever arm closer designed for institutional and other high traffic applications.The wide choice of options, installation accessories and ease of installationoffer maximum versatility.
UL- and ULC-listed for self-closing doors without hold-open. Tested and certified under ANSI Standard A156.4, grade one.
4040/4041 SERIES
• Non-handed. • Interior doors to 5'0".Exterior doors to 4'0".
• Self-reaming, self-tapping screws. • Fast, accurate installation.
• Delay action. • Track version available.
®
Hinge (Pull Side) Mounting
4040 CUSH Mount4040 EDA Mount
Parallel Arm (Push Side) MountingTop Jamb (Push Side) Mounting
4000 Series
East – Pennsylvania800-233-4210Fax 800-854-4146
Midwest – Missouri800-211-4607Fax 800-211-4608
Southwest – Texas866-693-6903Fax 866-693-6904
West – Nevada800-722-4210Fax 800-248-3620
www.topnotchinc.com [email protected]
192
4040/4041 SUPER SMOOTHEE®
Options:
• 4040-3077 regular non-handed arm mounts pull side or top jamb with shallow reveal. P4041 closer includes PA SHOE
• 4040-3077L long non-handed arm includes long rod and shoe 4040-79LR for top jamb mount.
• 4040-3077ELR extra long non-handed arm includes extra long rod and shoe, 4040-79ELR for top jamb mount with deep reveal.
• 4040-3049 hold-open non-handed arm mounts pull side or top jamb with shallow reveal, hold-open adjustable shoe. P4041
closer includes 4040-62PA shoe required for parallel arm mounting.
• 4040-3077EDA extra duty non-handed parallel arm features solid forged solid steel main and forearm for potentially abusive installations.
• 4040-3049EDA hold-open extra duty handed arm provides hold-open function, adjustable at the shoe.
• 4040-3077CNS cush-n-stop non-handed parallel arm features solid forged steel main arm and forearm with stop in soffit shoe.
• 4040-3049CNS hcush arm, provides hold-open function with templated stop/hold-open points. Handle controls hold-open function.
4040-3077
4040-79LR
4040-79ELR
4040-3049
4040-3077EDA4040-3049EDA
4040-3077CNS
4040-3049CNS
4000 Series
East – Pennsylvania800-233-4210Fax 800-854-4146
Midwest – Missouri800-211-4607Fax 800-211-4608
Southwest – Texas866-693-6903Fax 866-693-6904
West – Nevada800-722-4210Fax 800-248-3620
www.topnotchinc.com [email protected]
193
4040/4041 SUPER SMOOTHEE®
Options:
• 4040-3077SC spring cush non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe.
• 4040-3049SC spring hcush non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe. Handle controls hold-open function.
• 4040-72 standard, non-handed plastic cover.
• 4041-3071 standard, non-handed cast iron cylinder assembly.
• 4040-18 drop plate is required for hinge side mount where top railis less than 33/4" (95mm). Plate requires minimum 2" (51mm)minimum top rail.
• 4040-18G drop plate locates top jamb mounted closer flush with top of head frame face in flush ceiling condition. Plate requires 13/4” (44 mm) minimum head frame.
• 4040-18PA drop plate is required for parallel arm mounting wheretop rail is less than 51/2" (140 mm), measured from the stop. Platerequires minimum 2" (51mm) top rail.
• 4040-18J drop plate centers top jamb mounted closer vertically on head frame where face is less than 31/2” (89 mm). Plate requires 13/4” (44 mm) minimum head frame.
• 4040-30 cush shoe support provides anchorage for fifth screw used with cush arms, where reveal is less than 31/16” (78 mm).
• 4040-61 blade stop spacer required to lower parallel arm shoe to clear 1/2” (13 mm) blade stop.
4040-18 4040-18PA
4040-3077SC
4040-3049SC
4041-3071
4040-72
4040-18G
4040-18J
4040-304040-61
4000 Series
East – Pennsylvania800-233-4210Fax 800-854-4146
Midwest – Missouri800-211-4607Fax 800-211-4608
Southwest – Texas866-693-6903Fax 866-693-6904
West – Nevada800-722-4210Fax 800-248-3620
www.topnotchinc.com [email protected]
194
The 4040T SMOOTHEE® is a flexible heavy duty track closer designedspecifically for interior doors in institutional and other rugged high trafficapplications.
The 4111T SMOOTHEE® is a heavy duty track closer designedspecifically for interior doors in institutional and other high trafficapplications.
UL-and ULC-listed for self-closing doors. Tested and certified underANSI standard A156.4, grade one.
4040T/4111T SERIES
• Interior doors to 4’0”.
• 4040T closer mounts pull side on door, pull side top jamb or push side on door. 4111T closer mounts stop face side, specify right or left swinging door.
4040T Series Shown
Hinge (Pull Side) Mounting Top Jamb (Pull Side) Mounting Stop Face (Push Side) Mounting
4040T/4111T SERIES comes with:
• 4040T-3077T standard non-handed arm. Arm does not include track roller.
• 4040T-3038 standard, non hold-open, non-handed track.
• 4040T-3034 quiet, low friction track roller assembly. Shoulder dimension “X” = 1/8” (3 mm).
• 4040T-72 standard, non-handed plastic cover.
• 4110T-72 standard, non-handed plastic cover. 4111T only
• 4040T-3054 hold-open clip, mounts in track to provide hold-open function. Hold-open point controlled by clip location. 4040T only.
4040T-3077T 4040T-3038
4040T-3034
4040T-3054
4110T-724040T-72
4000 Series
East – Pennsylvania800-233-4210Fax 800-854-4146
Midwest – Missouri800-211-4607Fax 800-211-4608
Southwest – Texas866-693-6903Fax 866-693-6904
West – Nevada800-722-4210Fax 800-248-3620
www.topnotchinc.com [email protected]
195
Fire/life safety closer/holders for fire and smoke-barrier doors.
Designed to hold doors open in normal use but will release and automatically close doors under fire conditions. Heavy-duty cast iron cylinder for exceptional service life. UL-listed for use on fire-rated doors. Two-year warranty.
4040 SE SERIES
The 4040SE SENTRONIC® is a heavy-duty, non-handed, non-sized closer/holder designed to provide single-point hold-open for fire and smoke barrier doors. The door is held open until current interruption releases the holding mechanism and the door closes. Single-lever (track) arm closer is specificallydesigned for interior doors. Choice of finishes, track functions, and installation accessories meet virtually all life safetyrequirements.
Choice of 24 or 120 volt.
4040 SE 1
The 4640 Auto-Equalizer™ is a smart & reliable electrically poweredlow-energy power operator. It provides easy access for people withdisabilities, the elderly, or the frail. Designed primarily for manualopening applications that occasionally require automatic opening.
The 4640 Series is UL and ULC Listed with regular arm for self-closing doors and meets the provisions of ANSI standardsA117.1, A156.19.
• Non-sized cylinders for interior doors to 4'6" and exterior doors to 3'6".
• Non-handed for either right or let swinging door.
• Easily accessible switches provide on/off and continuous hold-open functions. Control module provides all timing andsequential door functions, electric strike controls and adjustmentsfor opening speed and force.
StandardMount
FlushCeiling Mount
Magnets
East – Pennsylvania800-233-4210Fax 800-854-4146
Midwest – Missouri800-211-4607Fax 800-211-4608
Southwest – Texas866-693-6903Fax 866-693-6904
West – Nevada800-722-4210Fax 800-248-3620
www.topnotchinc.com [email protected]
196
Fire/life safety closer/holder for fire and smoke-barrier doors.
The Sentronic® SEM7800 SERIES are heavy-duty, electrically controlleddoor-holding magnets. Magnets are fail safe and hold until the current isinterrupted. A manual door closer is used to control and close the door.A choice of floor, recessed-wall, or surface-mounted wall magnets areavailable.
7800 MAGNETS
All 7800 SERIES magnets are UL-listed for smoke- barrier or labeled firedoors.
• 7800 SERIES magnets are shipped with a screw pack for throughbolt or wood screw attachment of the door- mounted armature.
• Available in aluminum or dark bronze finishes.
• Wall units should be mounted 24" (610 mm) to 48" (1219 mm) fromthe floor for best performance.
• Suitable for use in pocket installations.
• Three magnet mountings:Recessed wall mount: SEM 7840, SEM 7850Surface wall mount: SEM 7830Surface floor mount: SEM7820
• Choice of 12, 24 or 120 volt.
• Simplified wiring.
Finishes:689, 695.
®
SEM 7830 Shown