How to model Slabs in sap 1- Define Material

2- Define grid System

Grids will be at ( Supports – Beams – Opennings ……… )

3- DefineSlabs ,Frame Sections

4- Draw Slabs , Frame Elements

5- Mesh Area

6- Assign Supports

7- Assign Different loads ( Slabs – Beams ) Loads on slabs Floor Cover & Live Loads Loads om Beams Wall Loads & Stairs Loads 8- Check the loads Locations and values

9- Run The analysis 10- Display the results ( Bending moments – Axial Force – Shear Force )

Check The Results by Smiple hand Calculations .