Upload
phungngoc
View
221
Download
4
Embed Size (px)
Citation preview
Serving Industry Since 1 9 5 7 W o r l d w i d e
Vanier Manufacturing, Inc. has served industry throughout North America, Europe, South America, Africa, Asia, and Australia manufacturing Vanier replacement soldering and desoldering tips since 1 957. Our 41 years of experience manufacturing and designing soldering and desoldering equipment has been combined to produce the highest quality Vanier products available. We have established an outstanding reputation in our field as one of its leaders. We offer competitive prices, prompt delivery, and the superior quality of Vanier soldering and desoldering tips to the electronic industry wor ld wide.
Vanier soldering and desoldering tips are designed to insure maximum heat conductivity and optimum operating life.
• Each tip is precision machined to size and shape out of high grade copper.
• The high grade copper core is then iron plated creating an adhesive bond against erosion.
• The tip is plated with nickel to insure against corrosion.
• Chrome plating is applied to provide immunization on the unwetted surface of the tip.
• Each tip is pre-tinned at the factory and ready for immediate use.
Vanier's Special "Resistance" Plating
New Plating Technology for users of "No Clean" Fluxes and Acid-based solders.
We at Vanier have developed a special plating to help resist erosion and premature detinning of tips caused by acid-based solders and "No Clean" fluxes
How Do I Order the Special Plating?
When placing your order, add the letter "R" at the end of any part number (i.e.. V10-8R, E40R, etc.). Your tips will be coated with our special resistance plating to help prolong the life of the tip.
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
TABLE OF CONTENTS - INHALT - TABLE DES MATIÈRES
VANIER Soldering Tips to fit Weiler® WTCP, WTCP-S, TCP 1
Weiler® EC1201, EC2000, WECP20, T-3001 2 VANIER Lotspitzen passend fur
Weiler® W60, W60P, W61C, W61 3 VANIER Pannes s'adaptent aux fers Weller® EC1002, EC2002, DEC1001, DTL1000, WS80, WSD80 3
WSD130, WTL1000-2, WRS-3000, EC1302A
Weller® WMCP-E,WMCP-EC,WM-120, MP127 4
Weller® Micro MLR20 and MPR30 4
Weller® WLC-100, WP-25, WP-30, WP-35 4
Weller® UNGAR® 921ZX, 2110AS, UTC, WRS3000, 535S, 537S, 5, 6
1235S, 4035S,4037S,9300/9900
Hakko®703, 926, 927, 928, 936, 937, 900M, M926, 907, 913/ESD 7
OK® Ind. SA-1000, SAI-640 7
Hakko®926, 927, 928, 936, 937, 900L, 908, 914/ESD 8
Hakko® N452, N453, N454 Dash Irons 9
Hakko®918, 920, 921, 922 Mach-I Irons 10
Hakko® 455, 456 Irons 11
Hakko® 980, 981, MG Irons 12
Pace® IR-70, SP-2A Sodr-Pen 13, 14
Millimeter Tips-0 5mm, 6mm, 8mm, 9.5mm 16
1/8" (3.2mm) 17
3/16" (4.8mm) 18
1/4" (6.4mm) 19,20
5/16" (8.0mm), 3/8" (9.5mm) 21,22
5/8'(15.9mm) 22
Hexacon® Therm-O-Trac® and Select-O-Trac® Irons 23
Edsyn® Loner® 24
OK® Ind, Xytronic®, Elvo®, Start® 25, 26
Antex® Irons 27
Oryx® Irons 27
Bonkote® Irons 27,28,29
VANIER Desoldering Tips to fit Weller® desoldering Irons 5
Hakko® desoldering Irons 12 VANIER Entlotspitzen passend für
Pace®, A.P.E.®, Air-Vac® desoldering Irons 15 VANIER Pannes à dessouder OK® Ind. desoldering Irons 12, 26
s'adaptent
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
CROSS REFERENCE - VERGLEICHSTABELLE - TABLE DES MATIÈRES
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
CROSS REFERENCE - VERGLEICHSTABELLE - TABLE DES MATIÈRES DESOLDER TIPS ENTLÖTSPITZEN PANNES À DESSOUDER
We acknowledge the following are trademarks of: Antex®of: Antex Electronics Ltd. A.PE.®of Automated Production Equipment Corp. American Beauty® of American Electrical Heater Co. Bonkote® of JAPAN Bonkote Co., Ltd. Edsyn® of Edsyn®, Inc. Loner® of Edsyn®, Inc. Esico® of Triton Ind. Hakko® of Hakko Metal Ind., Ltd. O.K.® Ind of O.K.® Ind. Pace® of Pace®, Inc. Sodr-X-Tractor® of Pace®, Inc. Hexacon® and Select-0-Trac®,Trierm-0-Trac® of Hexacon Electric Co. Weiler® and Weller®/Ungar® of Cooper Ind., Inc. Ersa® of Ersa GmbH. Zeva® of Zeva GmbH. Phillips®.
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
Tips to fit Weiler® WTCPL, WTCPN, WTCPR, WTCP-S WTCPT/FE Stations - TCP, TCPS / FE, TC201T, TC201 FE Irons Lötspitzen passend für - Pannes s'adaptent
Weller®
PTA
PTB
PTC
PTD
PTE
PTF
PTH
PTJ
PTK
PTL
PTM
PTO
PTP
Weller®
PTQ
PTR
PTS
PTT
SPECIAL Sharp Pt.
PTAA
PTBB
PTCC
PTDD
SMD Solder Cup
SPECIAL Thin Taper
Chisel
SPECIAL Thin Taper
Angle
TEMPERATURE NUMBERS -6 = 600°F/315°C • or -7 = 700°F / 370°C • or-8 = 800°F / 425°C • or-9 = 900°F / 480°C
Add temperature number to VANIER part number when ordering (ie, V10 -7) Vergessen Sie nicht, den Temperatur nummer bei Ihrer Bestellung anzugeben (V10 -7) N'oubliez pas d'ajouter a vos commandes le point de curie. (V10 -7)
1
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
Tips to fit Weiler® EC1002, EC2002, DEC1001, DTL1000, EMC500C WECP20, WTL1000, MC5001, T-3001, WS80, WSD80, WSD130 WRS3000 - EC1201, EC1201A/FE, LR-21, T-3000, WCC101 Irons Lötspitzen passend für - Pannes s'adaptent
Weller®
ETA
ETB
ETC
ETD
ETE
ETF
SPECIAL
ETH
ETJ
ETK
ETL
ETM
ETO
ETP
SPECIAL Sharp Point
Weller
ETR
ETS
ETT
ETU
ETV
ETAA
ETBB
ETCC
ETDD
ETBS
ETCS
ETDS
SPECIAL Solder Cup
SMD Chip Tip
SMD Chip Tip
Interior surfaces of these tips are immunized to prevent adhesion to the sensor. Die Innenflächen dieser Spitzen sind gegen Anhaften am Sensor geschützt. Les surfaces intérieures des pannes sont protégées contre l'adhérence au détecteur.
2 Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
Tips to fit Weiler® W60, W60P, W61, W61C Lötspitzen passend für - Pannes s'adaptent
Weiler®
CT5A
CT5B
CT5C
CT5D
CT5E
Weller®
CT5AA
CT5BB
CT5CC
CT5DD
TEMPERATURE NUMBERS -6 = 600°F/315°C • or-7 = 700°F / 370°C • or -8 = 800°F / 425°C • or -9 = 900°F / 480°C
Add temperature number to VANIER part number when ordering (ie, V65 -8) Vergessen Sie nicht, den Temperatur nummer bei Ihrer Bestellung anzugeben (V65 -8) N'oubliez pas d'ajouter à vos commandes le point de curie. (V65 -8)
Tips to fit Weller EC1002, EC2002, DEC1001, DTL1000 WS80, WSD80, WSD130, WTL1000-2, WRS-3000 Stations with EC1302A Irons Lötspitzen passend für - Pannes s'adaptent
Weller®
EPH101
EPH103
EPH105
EPH106
EPH107
Weller®
EPH109
EPH110
EPH111
EPH112
SPECIAL
Interior surfaces of these tips are immunized to prevent adhesion to the sensor. Die Innenflächen dieser Spitzen sind gegen Anhaften am Sensor geschützt. Les surfaces intérieures des pannes sont protégées contre l'adhérence au détecteur.
3
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
Tips to fit Weller WM-120, WMCP-EC, MP127 Lötspitzen passend für - Pannes s'adaptent
Weller®
MP131
SPECIAL
MP133
MP135
Weller®
MP136
MP137
MP138
SPECIAL
Tips to fit Weller Micro-solder Pencil MLR 20 and MPR 30 Lötspitzen passend für - Pannes s'adaptent
Weller®
MT-1 MPT-1
MT-1S MPT-1 S
MT-4 MPT-4
MT-6 MPT-6
Weller®
MT-A MPT-A
MT-B MPT-B
MT-H MPT-H
SPECIAL Thin Taper
Chisel
Interior surfaces of these tips are immunized to prevent adhesion to the sensor. Die Innenflächen dieser Spitzen sind gegen Anhaften am Sensor geschützt. Les surfaces intérieures des pannes sont protégées contre l'adhérence au détecteur.
Tips to fit Weiler® WLC-100, WP-25, WP-30, WP-35 Irons
Weller
ST-1
ST-2
ST-3
ST-4
Weller®
ST-6
ST-7
ST-8
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
Desoldering Tips to fit Weller® DS-40P, 60, DS100, 200
DS500E, 600, 700M, 701 EC, 800, 801, 2000ESD / WRS3000
TCP; DS102, 501, 601P, 1201 / ESD, 1203 A, 1204A Irons
Entlötspitzen passend für - Pannes à dessouder s'adaptent
VANIER WD25M WD40M WD50M WD80M WD50ML WD25ML Weller® DS-110 DS-112 DS-113 DS-114 DS-116 DS-117
METRIC THREAD - M5 Gewinde - Filetage M5
VANIER WD25 WD40 WD50 WD80 WD50L WD25L Weller® DS-110 DS-112 DS-113 DS-114 DS-116 DS-117
INCH THREAD - Zoll Gewinde - Filet .en pouces
PREMIUM QUALITY - Heavy Iron plating with stainless steel tube inner lining.
Premium Qualität - Eisen Plattiert und mit Rostfeiem Stahlrohr.
Haute Qualité - Protection de fer. Tube intérieure d'acier.
Tips to fit Weller®/ Ungar® Stations and Irons
Tips to fit 9931 AS, 9941 AS, UTC 331 1/8" Tips to fit 535S, 1235S, 4035S; with adapter
537S, 1237S, 4037S, 37, UTC131, 9300 9911 AS, UTC231 Irons
Weller®/ Ungar®
9960
9961
9962
9963
9964
9965
Weller®/ Ungar®
PL331
PL333
PL340
6961
7154
7155
5
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
Replacement Tips to fit Weller®/ Ungar® Soldering Stations / Irons
To fit 921ZX, 2110AS, UTC, WRS3000 Stations 9211, 9911 AS, 2111 AS, UTC231; 9300 Irons
1/4" Thread-on Tips to fit 37, SL, 360-362,537S 1237S, 4037S, 3125, 3140 Heaters-UTC131 Iron
Weller®/ Ungar®
9010
9011
9012
9013
9014
9015
9016
9017
9018
9019
9050
9051
9052
Tip retainer required to use these tips
Weller® Ungar®
PL111
PL113
PL114
PL116
PL133
PL138
PL151
PL153
PL155
SPECIAL
SPECIAL
SPECIAL 6333
High Thermal Tips to fit 921ZX, 2110AS UTC 241, 2111 AT, 9211, 9911 AS / HC
Tip retainer required to use these tips
Weller®/ Ungar®
9056
9057
9058
9059
9060
9061
6 Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
VK Tips to fit HAKKO® and OK® INDUSTRIES Irons Hakko® 373, 700, 702, 703, 926, 927, 928, 933, 936, 937 ESD Stations with 900M, ESD; M926; 907, ESD; 913, ESD Irons OK® Industries: SA1000 Stations with SAI-640 Iron Lötspitzen passend für - Pannes s'adaptent
Hakko®
900M-T-1C
900M-T-2C
SPECIAL
900M-T-3C
900M-T-4C
900M-T-0.8C
900M-T-0.8D
900M-T-1.2D
900M-T-1.6D
900M-T-2.4D
900M-T-3.2D
900M-T-4.8D
900M-T-5.6D
900M-T-1.2LD
900M-T-2LD
900M-T-3.2LD
Hakko®
900M-T-B
SPECIAL Medium Pt.
900M-T-I 900M-TSI
900M-T-K SMD
Blade Tip
900M-T-LB
SPECIAL Medium Pt.
900M-T-R
900M-T-RT
900M-T-SB
900M-T-S1
900M-T-S3
900M-T-S4
900M-T-S6
900M-T-S7
SMD Solder Cup
SMD Solder Cup
7
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
Heavy Duty Tips to fit Hakko® 373, 926, 927, 928, 934 936, 937 Stations - 900L, ESD; 908, ESD; 914; L926 Irons Lötspitzen passend für - Pannes s'adaptent
Hakko®
900L-T-2B
900L-T-2C
900L-T-3C
900L-T-4C
900L-T-5C
900L-T-1.6D
900L-T-2.4D
900L-T-3.2D
900L-T-B
900L-T-I
900L-T-K
900L-T-LB
900L-T-S1
VANIER
VL27
VL7
VL8
VL28
VL21
VL1
VL2
VL3
VL4
VL9
VL26
VL5
VL12
8 Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
VK Tips to fit Hakko® N452, N453 Dash Irons Lötspitzen passend für - Pannes s'adaptent
Hakko®
N452-T-B
N452-T-C
N452-T-D
N452-T-I
N452-T-SB
N452-T-SC
N452-T-SD
N452-T-1C
N452-T-2C
N452-T-3C
N452-T-4C
VANIER
VK440
VK441
VK442
VK443
VK444
VK447
VK448
VK450
VK451
VK452
VK453
VK Tips to fit Hakko® N454 Dash Irons Lötspitzen passend für - Pannes s'adaptent
Hakko®
N454-T-B
N454-T-D
N454-T-I
N454-T-2C
N454-T-3C
N454-T-4C
N454-T-5C
VANIER
VK470
VK472
VK474
VK476
VK477
VK478
VK479
9 Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
VK Tips to fit Hakko® 918 Mach-I Irons Lötspitzen passend für - Pannes s'adaptent
Hakko®
918-T-3C
918-T-4C
918-T-5C
918-T-1.6D
918-T-2.4D
918-T-3.2D
918-T-B
918-T-BC
VANIER
VK918
VK919
VK920
VK925
VK927
VK929
VK930
VK932
VK Tips to fit Hakko® 920, 921, 922 Mach-I Irons Lötspitzen passend für - Pannes s'adaptent
Hakko®
920-T-2C
920-T-3C
920-T-4C
920-T-1.0D
920-T-1.6D
920-T-2.4D 920-T-D
920-T-3.2D
920-T-A
920-T-B
920-T-BC
920-T-l
920-T-R
920-T-RT
920-T-SB
Hakko® VANIER
10
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
Tips to fit Hakko® 455 Soldering Irons Lötspitzen passend für - Pannes s'adaptent
Hakko®
A-1047-B
A-1048-3C
A-1049-4C
A-1050-5C
A-1051-6C
A-1052-5D
VANIER
VK200
VK201
VK202
VK203
VK204
VK205
Tips to fit Hakko® 456 Soldering Irons Lötspitzen passend für - Pannes s'adaptent
Hakko®
A-1023-2B
A-1024-4C
A-1025-8C
A-1026-5D
A-1031-6C
A-1179-9D
VANIER
VK300
VK302
VK303
VK304
VK305
VK306
11
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
Tips to fit Hakko® 980 Iron or 981 Presto Gun Lötspitzen passend für - Pannes s'adaptent
Hakko®
980-T-B
980-T-BC
980-T-D
VANIER
VK980
VK981
VK982
Tips to fit Hakko® MG Soldering Guns 582M-V12 583M-V12, 585M-V12, 587M-V12, 589M-V12 Lötspitzen passend für - Pannes s'adaptent
Hakko® VANIER 582-T-4 VK187B
585-T-6 VK250B
Desoldering Tips to fit Hakko® and OK®lnd. Irons and Guns Entlötspitzen passend für - Pannes à dessouder s'adaptent
12
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
1/8" (3.2mm) Tips to fit Pace® (with adapter) IR-70, SP-2A Sodr-Pen® A.P.E.® Irons Lötspitzen passend für - Pannes s'adaptent
Pace®
1121-0130
1121-0131
1121-0132
1121-0238
1121-0339
1121-0340
1121-0501
1121-0502
1121-0503
1121-0504
A. P.E.®
1212-0125
1212-0016
1212-0001
VANIER
V265
V266
V267
V268
V269
V270
V271
V272
V273
V281
V282
V283
V285
V287
V289
V290
V291
V292
V293
Thermal-Boost Tips to fit Pace® IR-70, SP-2A Sodr-Pen® Lötspitzen passend für - Pannes s'adaptent
Pace®
1121-0510
1121-0516
1121-0518
1121-0524
VANIER
V301
V303
V305
V307
13
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
3/16" (4.8mm) Tips to fit Pace® IR-70, SP-2A Sodr-Pen® Irons Lötspitzen passend für - Pannes s'adaptent
Pace®
1121-0302
1121-0303
1121-0304
1121-0305
1121-0335
1121-0336
1121-0337
1121-0349
1121-0357
1121-0358
1121-0359
1121-0360
1121-0406
1121-0414
1121-0490
1121-0499
1121-0527
1121-0528
1121-0529
1121-0530
1121-0531
1121-0532
1121-0533
VANIER
V340
V341
V342
V343
V370
V371
V372
V373
V374
V375
V369
V376
V377
V378
V379 (Similar to Pace®
#1121-0490)
V380
V371L
V374L
V376L
V372L
V375L
V377L
V370L
14 Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
1/8" (3.2mm) Desoldering Tips to fit Pace®, Air-Vac®, and A.P.E.® Entlötspitzen passend für - Pannes à dessouder s'adaptent
VANIER Tips to fit Pace® SX-20, SX-25, SX-25V, SX-30, SX-30V SODR-X-TRACTORS®
Pace® A.P.E.® 1121-0214 1212-0225 1121-0480
1121-0215 1212-0440 1121-0479 1121-0216 1212-0550 1121-0217 1212-0660 1121-0091
VANIER D-25 D-30 D-36 D-40 D-40 D-50 D-60 D-90
VANIER Tips to fit Pace® SX-40A, SX-55A, SX-65A, SX-70 SODR-X-TRACTORS® with adapter
1121-0253 1212-2025 D-25L .025" (0.6) 1121-0485 - - - D-30L .030" (0.8) 1121-0254 1212-2040 D-36L .036" (0.9) 1121-0486 - - - D-40L .040" (1.0)
D-50L .050" (1.3) 1121-0255 1212-2060 D-60L .060" (1.5)
VANIER Tips to fit Pace® SX-40A, SX-55A, SX-65A, SX-70 SODR-X-TRACTORS® with adapter
1121-0261 1212-2125 D-30B .030" (0.8) 1121-0262 1212-2136 D-40B .040" (1.0) 1121-0267 1212-2160 D-60B .060" (1.5)
3/16" (4.8mm) Desolder Tips to fit Pace®SX-65A & SX-70 SODR-X-TRACTORS® Entlötspitzen passend für - Pannes à dessouder s'adaptent
Nickel Plate Nickel plattiert
Plaquée au nickel
PREMIUM QUALITY - Iron plated - Stainless steel tube Premium Qualität - Eisen plattiert - Rostfreie Stahlrohr Haute Qualité - Protection de fer - Tube intérieure d'acier
Pace® VANIER 1121-0367 3-30N 1121-0342 3-40N
1121-0368 3-60N 1121-0507 3-90N
1121-0505 3-30NT 1121-0494 3-40NT 1121-0506 3-60NT
Pace® VANIER 1121-0462 3-30P 1121-0463 3-40P
3-50P 1121-0464 3-60P
3-30PT 3-40PT 3-60PT
15
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
5mm, 6mm, 8mm, 9,5mm Tips to fit Ersa®, Zeva®, Philips®, Stiron® Lötspitzen passend für - Pannes s'adaptent
VANIER
V510M V512M V514M V516M
V518M V520M V522M V524M
V530M V532M V534M
V536M V537M V538M
V540M V542M
V544M V546M
V549M
V552M
V610M
V613M
V616M
V618M
V620M V622M
V625M
V628M
V815M
V817M
V818M V819M
V901M
V903M V904M
Length Länge
Longueur
57mm 70mm 80mm 90mm
57mm 70mm 80mm 90mm
57mm 70mm 80mm
57mm 70mm .80mm
57mm 70mm
57mm 80mm
70mm
70mm
100mm
100mm
85mm
100mm
85mm 100mm
100mm
100mm
90mm
105mm
90mm 105mm
125mm
125mm 140mm
16
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
1/8" (3.2mm) Tips to fit Hexacon®, Esico®,Pace®, A.P.E.® American Beauty® Irons
American Beauty®
524
510
Sharp Point
501
503
502
271
507
512
509
Esico®
240-102 240-111
Sharp Point
210-132 210-143
211-105
211-127
210-107
210-114
220-103 220-116
251-120 251-131
Hexacon
HT104 HT511
HT222
Sharp Point
HT249
HT331
HT361
HT376
HT477
HT560 HT667
HT693
VANIER
V261
V258
V258S
V251
V259
V253
V252
V254
V255
V262
V257
1/8" (3.2mm) Tips to fit Pace® IR-25, IR-70, SP-2ASodr-Pen® and A.P.E.® Irons (with adapter)
APE®
1212-0125
1212-0016
1212-0001
Pace®
1121-0130
1121-0131
1121-0132
1121-0238
1121-0339
1121-0340
1121-0501
1121-0502
1121-0503
1121-0504
VANIER
V265
V266
V267
V269
V270
V281
V282
V283
V285
V287
More VANIER 1/8" (3.2mm) Tips to fit Pace® Irons on page 13
17
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
3/16 "(4.8mm) Tips to fit Hexacon®, Esico®, and American Beauty® Soldering Irons Lötspitzen passend für - Pannes s'adaptent
American Beauty®
630
619
643
617
621
604
625
605 607
626
615
613
Esico®
320-136 320-144
310-108 310-115
320-109 320-118
340-107 340-114
311-103 311-124
312-105 312-116
342-112 342-119
322-220 322-146
322-104 322-117
Hexacon®
HT118
HT190
HT195
HT207
HT214
HT220
HT276
HT281
HT474
HT479
HT548
HT892
HT107
VANIER
V363S Sharp Pt.
V356
V352
V357
V361
V364
V355
V362
V354
V363
V359
V368
V367
V358
3/16 "(4.8mm) VANIER Tips to fit PACE® Irons on pages 13,14,15
18
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
1/4" (6.4mm) Tips to fit Hexacon®, Esico®, American Beauty® Irons Lötspitzen passend für - Pannes s'adaptent
American Beauty®
715
703
724
710
714
720
721
701
704
706
716
Esico®
451-146 451-167
412-246 412-159
440-129 440-177
432-115 432-353
422-347 422-144
420-143 420-164
420-106 420-119
412-103 412-131
413-102 413-134
442-139 442-153
426-161 426-173
410-140 410-126
420-201
411-107 411-123
422-108 422-132
Hexacon®
HT159
HT313
HT324
HT343
HT349
HT358
HT397
HT417
HT451
HT463
HT513
HT552
HT553
HT586
HT691
HT699
VANIER
V409
V416
V403
V407
V406
V412
V417
V410
V404
V402
V408
V414
V401
V411
V405
V413
V418
19
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
1/4" (6.4mm)Tips to fit Hexacon®, Esico®, American Beauty® Soldering Irons Lötspitzen passend für - Pannes s'adaptent
American Beauty®
738
737
734
739
67-S
730
Esico®
440-138
420-130
430-116
410-133
422-113
420-114
442-147
413-117
412-110
426-189
Hexacon®
HT131
HT202
HT234
HT252
HT253
HT356
HT382
HT426
HT452
HT468
HT473
HT685
HT773
HT841
VANIER
V435
V432
V451
V430
V431
V443
V452
V433
V445
V456
V437
V444
V442
V438
20 Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
5/16" (8.0mm)Tips to fit Hexacon® Soldering Irons Lötspitzen passend für - Pannes s'adaptent
Hexacon®
HT506
HT547
HT550
HT556
VANIER
V581
V584
V582
V583
V585
3/8" (9.5mm)Tips to fit Hexacon®, Esico®, American Beauty® Lötspitzen passend für - Pannes s'adaptent
Esico®
640-168
613-103
610-102
620-383
640-190
610-113
Hexacon®
HT108
HT129
HT145
HT151
HT449
HT470
HT472
HT493
VANIER
V650
V648
V654
V652
V640
V653
V651
V656
21
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
22
V801
V802
V803
V804
VANIER Hexacon®
HT178
HT256
HT499
HT891
5/8" (15.9mm)Tips to fit Hexacon®, Weiler® Marksman SP175 Esico®, American Beauty® Irons Lötspitzen passend für - Pannes s'adaptent
3/8" (9.5mm)Tips to fit Hexacon®, Esico®, American Beauty® Lötspitzen passend für - Pannes s'adaptent
Hexacon®
HT566
HT577 HT339
HT918
HT140
VANIER
V657
V658
V659
V645
SPECIAL V644
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
H Tips to fit Hexacon® Therm-O-Trac® 1001,1002 Select-O-Trac® 1003A/B, 1006A/B Soldering Irons Lötspitzen passend für - Pannes s'adaptent
Hexacon®
J101X
J102X
J201X
J202X
J203X
J204X
J206X
J301X
J302X
J901X
J903X
J910X
Hexacon®
J911X
J912X
J914X
J916X
J917X
J918X
J919X
J932X
J935X
J940X
J954X
VANIER
Tips to fit Hexacon® MS-10, MV-15/16, MF-20/21 Irons Lötspitzen passend für - Pannes s'adaptent
Hexacon®
HT880X
HT881X
HT882X
HT883X
VANIER Hexacon®
HT884X
HT885X
HT886X
SPECIAL
VANIER
23
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
Tips to fit Edsyn® Loner® CL 1080, CL1180 Irons 900, 902, 910, 920, 925, 930, 935, 951, 952 Stations Lötspitzen passend für - Pannes s'adaptent
Edsyn® Loner®
LT-374
LT-375
LT-376
LT-381
LT-383
LT-392
LT-393
LT-394
LT-395
LT-425
LT-429
LT-430
LT-431
LT-444
LT-445
LT-446
VANIER
VE74
VE75
VE76
VE81
VE83
VE92
VE93
VE94
VE95
VE25
VE29
VE30
VE31
VE44
VE45
VE46
24
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
Tips to fit OK® Ind. BTRI-548, Solder Aid® SA-3-115, SA-3-230 Irons BTR-35 Station; Xytronic® ; Auto-Temp® 168-2C, 168-2CL, 169-2D, 169-2L; Auto-Stat® 2000 / 3000; START®; ELVO® E9-60A, E9-60D Lötspitzen passend für - Pannes s'adaptent
Xytronic®
823
822
826
824
825
ELVO®
E231
E301
E221
E261
E241
E311
E281
E291
E251
OK® Ind.
SAT-3X10
SAT-3X20
SAT-3X30
SAT-3X40
SAT-3X50
SAT-3X60
SAT-3X70
SAT-3X80
SAT-3X90
SAT-3X100
SAT-3X110
SAT-3X120
SAT-3X121
SAT-3X130
SAT-3X140
SAT-3X150
Tips to fit OK® Ind. BTRI-533, START®, ELVO®, Xytronic® Irons Lötspitzen passend für - Pannes s'adaptent
OK® Ind.
SAT-310X10
SAT-310X20
SAT-310X30
OK® Ind.
SAT-310X40
SAT-310X50
SAT-310X60
25
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
Tips to fit OK® Ind SA-572, SA-1000, SA-1002 - SAI-640/SAI-690 Irons Lötspitzen passend für - Pannes s'adaptent
VANIER Tips to fit SAI-640 VANIER Tips to fit SAI-690/SA-572
OK® Ind.
S4-105S
S4-106S
S4-202S
S4-304S
S4-305S
S4-306S
S4-308S
S4-309S
S4-201L
S4-203L
S4-208L
S4-304L
S4-305L
S4-312L
OK® Ind.
SPECIAL
S9-108S
S9-116S
S9-203S
S9-208S
S9-305S
S9-306S
S9-312S
S9-320S
S9-112L
S9-201L
S9-202L
S9-204L
S9-308L
S9-319L
Desolder tips to fit OK®lnd BTR-15 / 25 / 35 / 55 Stations DG 20065 / 24065 / 24100; SA-80, 600, 1200, 1201 Guns / Irons Enlötspitzen passend für - Pannes à dessouder
OK® Ind. BTR-D-027
BTR-D-031
BTR-D-039
BTR-D-047
BTR-D-063
VANIER V27BT
V31BT
V39BT
V47BT
V63BT
Inside Dia. (ID) Outer Dia. (OD) lnnen-0 Aussen-0 0 Intérieure 0 Extérieur
.027" (0.7) .080" (2.0)
.031" (0.8) .085" (2.2)
.039" (1.0) .090" (2.3)
.047" (1.2) .100" (2.5)
.063" (1.6) .115" (2.9)
Premium Quality - Iron Plated - Stainless Steel Tube Premium Qualität - Eisen plattiert - Rostfreiem Stahlrohr Haute Qualité - Protection de fer - Tube intérieure d' acier
26 Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
Tips to fit Bonkote® PC-118SL Stations; SG5 Series Tips Lötspitzen passend für - Pannes s'adaptent
Bonkote®
SG 5-2B
5-2BC
5-0.5C
5-1C
5-2C
5-2D
VANIER
BT-40
BT-43
BT-44
BT-45
BT-46
BT-48
27
Tips to fit Oryx® Irons Lötspitzen passend für - Pannes s'adaptent
Oryx®
p
x
X-PL
VANIER
0-727N (Nickel)
0-720N (Nickel)
0-720I (Iron)
Oryx® VANIER
0-721I (Iron)
0-721N (Nickel)
0-723I (Iron)
Tips to fit Antex® C,G and CTC Soldering Irons Lötspitzen passend für - Pannes s'adaptent
Antex®
2-IC
2-IS
46-IC
46-IS
8-I
VANIER Antex®
6-NS
46-NS
VANIER
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
VANIER
BT-50
BT-51
BT-52
BT-53
BT-54
BT-55
BT-56
BT-57
Bonkote®
SG6-5A
6-2B
6-5B
6-1C
6-2C
6-3C
6-4C
6-5D
Tips to fit Bonkote® SR-1012 / 1022 / 1032 / 1052 SRL-1052; CRD-625; CRL-625; SG6 Series Tips Lötspitzen passend für - Pannes s'adaptent
Tips to fit Bonkote® CRD-730 / 740; CRL-730, 740; CR-1073 SS-1005A; TC-300A, 400A, 500A; SG7 Series Tips Lötspitzen passend für - Pannes s'adaptent
Bonkote®
SG7-5A
7-2B
7-5B
7-1C
7-2C
7-3C
7-4C
7-5D
SGL7-KF
VANIER
BT-65
BT-66
BT-67
BT-68
BT-69
BT-70
BT-71
BT-72
BT-73
28
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]
29
Tips to fit Bonkote® SR-1062, 1062F, 1072; CRD-1030 CRD-1040; CRL-1030, 1040; SRL-1062, 1062F, 1072; SS-1005B TC-300B, 400B, 500B; SG-10 Series Tips Lötspitzen passend für - Pannes s'adaptent
Bonkote®
SG10-8A
10-4B
10-6B
10-8B
10-4BC
10-6BC
10-8BC
10-4C
10-6C
10-8D
10-KF
VANIER
BT-80
BT-81
BT-82
BT-83
BT-84
BT-85
BT-86
BT-87
BT-88
BT-89
BT-90
Elmatik AS, Türi 9, 11314 Tallinn Estonia tel. +372 650 3875 tel. +372 650 3876 fax +372 655 8019 e-mail: [email protected]