The information presented in this brochure is intended to demonstrate the breadth of Stryker product offerings. Always refer to the package insert, product label and/or user instructions before using any Stryker product. Products may not be available in all markets. Product availability is subject to the regulatory or medical practices that govern individual markets. Please contact your Stryker representative if you have questions about the availability of Stryker products in your area. The marks bearing the symbol TM are trademarks of Stryker. The marks bearing the symbol ® are registered trademarks of Stryker. Literature Number: LOHFX-ST GC/GS 500 06/04 Copyright © 2004 Stryker Printed in USA 325 Corporate Drive Mahwah, NJ 07430 t: 201 831 5000 www.stryker.com Figure 2 Figure 3 Note: The surgeon should NOT attempt to continue impacting the femoral component if visual and auditory clues indicate that the resting position of the femoral component has been reached. This is true even if the femoral component is proud in reference to the level of the broach trial. Figure 1 CAUTION: An Omnifit® HFx™ hip stem cannot be inserted without this stem inserter! For Press-Fit Applications Only Femoral Stem Insertion The stem is introduced into the femoral canal manually with an axial force until resistance is encountered. In order to assist in aligning and seating the stem, the Omnifit® HFx™ inserter/pusher (1020-2300) should be used. A mallet is then used to seat the hip stem into the canal (Figure 1) until the collar of the prosthesis rests in intimate contact with the prepared neck cut (Figure 2). For Cemented Applications Only Femoral Stem Insertion The proximal portion of the stem is coated with doughy cement to ensure that blood and fat does not come in contact with the stem. To assist in aligning antiversion/ retroversion, and seating the stem, the Omnifit® HFx™ stem inserter/pusher (1020-2300) should be used. The assembled stem is introduced into the femoral canal with an axial force, while the surgeon provides a laterally directed force (Figure 3). The goal is to introduce the stem in neutral position with an adequate cement mantle. Excess cement is removed. At final seating, the collar of the prosthesis should rest in intimate contact with the prepared neck cut. (Catalog # 1020-2300) OmniFit ® HFx TM 127˚ 132˚ Stem Inserter Surgical Technique

Home - ZWAN OmniFit HFx 127 132 Ste… · Created Date: 7/26/2004 11:30:44 AM

Download PDF Report

Upload
others
View
8
Download
0

Embed Size (px)

Citation preview

Page 1: Home - ZWAN OmniFit HFx 127 132 Ste… · Created Date: 7/26/2004 11:30:44 AM

The marks bearing the symbol TM are trademarks of Stryker.The marks bearing the symbol ® are registered trademarks of Stryker.

Literature Number: LOHFX-STGC/GS 500 06/04

325 Corporate DriveMahwah, NJ 07430t: 201 831 5000

www.stryker.com

Figure 2 Figure 3

Note: The surgeon should NOT attempt to continue impacting the femoralcomponent if visual and auditory clues indicate that the resting position ofthe femoral component has been reached. This is true even if the femoral component is proud in reference to the level of the broach trial.

Figure 1

CAUTION: An Omnifit® HFx™ hip stem cannot be inserted without this stem inserter!

For Press-Fit Applications OnlyFemoral Stem InsertionThe stem is introduced into the femoralcanal manually with an axial force untilresistance is encountered. In order to assist inaligning and seating the stem, the Omnifit®HFx™ inserter/pusher (1020-2300) shouldbe used. A mallet is then used to seat the hipstem into the canal (Figure 1) until the collarof the prosthesis rests in intimate contactwith the prepared neck cut (Figure 2).

For Cemented Applications OnlyFemoral Stem InsertionThe proximal portion of the stem is coated with doughy cement to ensure thatblood and fat does not come in contact withthe stem. To assist in aligning antiversion/retroversion, and seating the stem, theOmnifit® HFx™ stem inserter/pusher (1020-2300) should be used. The assembledstem is introduced into the femoral canalwith an axial force, while the surgeon provides a laterally directed force (Figure 3).The goal is to introduce the stem in neutralposition with an adequate cement mantle.Excess cement is removed. At final seating,the collar of the prosthesis should rest inintimate contact with the prepared neck cut.

(Catalog # 1020-2300)

OmniFit® HFxTM 127˚ 132˚Stem Inserter

Surgical Technique