HOLSTERS - GSM Outdoors · The Impact is an inside the waist band IWB conceal carry holster, is comfortable, small, low-profile, and ambidextrous which allows you to wear it on your

HOLSTERS

THE TEMPEST

COMFORT CONCEALED-CARRY SERIES

CRF-TPSTSA1M-1 1”-1.5” MICROCRF-TPSTSA1S-2 2”-2.5” SUB-COMPACTCRF-TPSTSA1C-3 3”-3.5” COMPACT

The Tempest is an inside the waist band (IWB) conceal-carry holster. Designed for extreme comfort. This holster is small, low-profile, and uses a comfort panel; you’ll almost forget it’s there.

▪ Very thin and compact design, wear concealed in comfort

▪ Padded-back neck riser keeps your firearm from touching your body

▪ Spring-Steel clip allows you to conceal-carry your pistol

▪ Our memory-type foam laminate process allows the holster to take on the shape of your firearm for a custom fit

▪ Moisture barrier with comfort mesh panel

▪ 1680 denier Ballistic Nylon

▪ Fits most 1911 Style pistols

THE ECLIPSE

SEMI-AUTOMATIC PISTOL SERIES

CRF-TESA1S-2 2”-2.5” SUB-COMPACTCRF-TESA1C-3 3”-3.5” COMPACTCRF-TESA1F-4 4” FULLCRF-TESA1F-5 5” FULL

The Eclipse is a very low-profile holster system utilizing our “3-D” technology. The holster screams flexibility, offering conceal-carry positions inside the waist band (IWB) or outside the waist band (OWB). Its wide platform makes the holster both secure and stable.

▪ Speed-Retainer for safely securing and giving extremely fast access to the firearm – Optional spring-loaded thumb break available.

▪ Uses 3-D technology so holster will not collapse when the pistol is removed

▪ Memory-type foam laminate technology molds to the gun providing a custom fit

▪ Barrel ramp system


THE CYCLONE


CRF-CYCLSA1M-1 1”-1.5” MICROCRF-CYCLSA1S-2 2”-2.5” SUB-COMPACTCRF-CYCLSA1C-3 3”-3.5” COMPACT

The Cyclone is an extremely stable inside the waist band (IWB) and outside the waist band (OWB) holster. Designed for extreme comfort with dual clips, a removable comfort panel and extremely low-profile, you’ll almost forget it’s there. Padded neck riser keeps the firearm from touching your body.

▪ Wear OWB when the comfort panel is removed

▪ Wear IWB using dual exterior pants clips – no belt required


▪ Moisture barrier with comfort mesh panel

▪ Padded-back neck riser keeps your firearm from touching your body

▪ 3-D holster cavity makes re-holstering easier

THE UNDERCOVER

LOW-PROFILE CONCEAL SERIES

CRF-TUSA1M-1 1”-1.5” MICROCRF-TUSA1S-2 2”-2.5” SUB-COMPACTCRF-TUSA1C-3 3”-3.5” COMPACT

The Undercover is a low-profile conceal-carry holster. This holster is fully-ambidextrous and can be worn in up to nine carry positions inside the waist band IWB or outside the waist band OWB.

▪ Ambidextrous design to fit IWB or OWB

▪ Adjustable Spring-loaded Thumb Break

▪ Ballistic weight fabric retains its shape


▪ Spring-steel clip allows you to conceal-carry your pistol


GSMOUTDOORS.COM334 335CROSSFIRE

SH

OO

TIN

G G

EA

R

HOLSTERS THE GRIP

LOW PROFILE CONCEALED-CARRY SERIES

CRF-GRPSA1M-1 1”-1.5” MICROCRF-GRPSA1S-2 2”-2.5” SUB-COMPACTCRF-GRPSA1C-3 3”-3.5” COMPACT

The Grip is designed to be an inside the waist band (IWB) or pocket conceal-carry holster. Rubber fabric maximizes grip to the pant and belt; securely holding and reducing any movement. A closed bottom design keeps lint and other items out of the barrel. Choose from two options; the Grip or the Grip Clip. The Grip Clip features our durable spring-steel belt clip.

▪ Small, convenient, very low-profile holster

▪ Rubber exterior fabric that grips the inside of the pant or pocket

▪ Memory-type foam laminate material molds to your firearm to provide a custom fit


▪ Fully-Ambidextrous

THE VIGOR


CRF-VIGRSA1M-1 1”-1.5” MICROCRF-VIGRSA1S-2 2”-2.5” SUB-COMPACTCRF-VIGRSA1C-3 3”-3.5” COMPACT

The Vigor is an extremely stable inside the waist band (IWB) holster. Designed for comfort using dual clips, a comfort panel, and extremely low-profile, you’ll almost forget it’s there. Padded neck riser keeps the firearm from touching your body.

▪ Moisture barrier with comfort mesh

▪ Very compact design, wear concealed in comfort

▪ Fits inside the waist band (IWB) with dual exterior pant clips

▪ Uses new 3-D holster design and will not collapse when the pistol is removed

▪ Memory-type foam laminate technology

▪ 1680 denier Ballistic Nylon fabric; durable and retains its shape

▪ Designed to fit most 1911 style pistols

THE IMPACT


CRF-MPCTSA1M-1 1”-1.5” SUB-COMPACTCRF-MPCTSA1S-2 2”-2.5” COMPACTCRF-MPCTSA1C-2 3”-3.5” FULL

The Impact is an inside the waist band IWB conceal carry holster, is comfortable, small, low-profile, and ambidextrous which allows you to wear it on your left- or right-side, traditional or crossdraw.

▪ Ambidextrous design to fit IWB

▪ Very low-profile, thin holster design

▪ Easy start “duckbill” barrel ramp with built-in sight trough



THE EDC


CRF-EDCSA1SFFITS MULTIPLE WEAPONS: - ALL GLOCK MODELS UP TO 4.5” BBL- ALL SPRINGFIELD DX, XDM AND XDS SUB-COMPACT TO 4.25” BBL- BARETTA PX4 STORM UP TO 4.25” BBL- BERSA THUNDER- H & K ALL MODELS UP TO 4.25” BBL- RUGER AMERICAN 9MM, 40S&W, 456ACP- RUGER LC9, LC40- RUGER P89- RUGER SR22- RUGER SR9, SR9C, SR40, SR40C- SMITH & WESSON M&P- SMITH & WESSON M&P SHIELD- WALTHER CCP- WALTHER PPK

The EDC is an inside the waist band (IWB) conceal-carry holster. This holster is small and low-profile; you’ll almost forget it’s there!

▪ Compact design, wear concealed in comfort

▪ Moisture barrier behind comfort panel

▪ Clips over the outside of the pant for secure fit

▪ Breathable comfort Spacer Mesh back panel


SH

OO

TIN

G G

EA

R

HOLSTERS

THE CAMOUFLAGE

LOW PROFILE CONCEAL-CARRY SERIES

CRF-CAMOSA1M-1 1”-1.5” SUB-COMPACTCRF-CAMOSA1S-1 2”-2.5” COMPACTCRF-CAMOSA1C-3 3”-3.5” FULL

The Camouflage is a new class of conceal-carry holster for today’s shooter. Riding securely between the belt and pants, we call this holster our “inside the belt” or IB. The IB holsteroffers the best features of IWB and OWB holsters withouttheir negative characteristics. Our innovative design tiltsthe firearm grip toward the user, not outward, resultingin almost no printing. The rubber grip fabric maximizes the grip to the pants and belt producing a secure hold and reduced movement.

▪ Sturdy, wide-offset belt loops for stability

▪ Conceal-carry holster worn inside the belt rides between belt and pant; compression fit


▪ Barrel shroud protects firearm scratches caused by pant rivets

THE MAG


CRF-MAGA1S-2 2”-2.5” SUB-COMPACTCRF-MAGSA1S-2 3”-3.5” COMPACTCRF-MAGSA1C-3 5” FULL

The Mag, a very low-profile outside the waist band (OWB) holster with integrated magazine pouch. Its forward cant allows for an easier conceal and draw, and uses “Spring-loaded Thumb Break” to keep the firearm retained. This holster flexes but keeps its shape and allows for easy insertion of the pistol back into the holster.

▪ Fully-Ambidextrous.

▪ Extra magazine pocket

▪ Adjustable Spring-loaded Thumb Break

▪ Sturdy, Wide-offset belt loops for stability


▪ 1680 Denier Ballistic Nylon

▪ Compression Fit

THE ROCKET

SEMI-AUTOMTIC PISTOL SERIES

CRF-TRSA1S-2 2”-2.5” SUB-COMPACTCRF-TRSA1C-3 3”-3.5” COMPACTCRF-TRSA1F-4 4” FULLCRF-TRSA1F-5 5” FULL

The Rocket is a true pancake holster, but doesn’t collapse like traditional pancake holsters. Using our popular “3-D” technology, the cavity of the holster body stays open when the firearm is drawn, making it very easy to re-holster. It uses wide-offset belt loops to keep the holster stable and also has our new “Spring-Loaded Thumb Break” to hold the firearm securely. The Rocket sits a little higher to allow the user to sit down comfortably and fits most semi-auto pistols.

▪ Very compact; wear concealed or outside the waist band

▪ Adjustable Spring-loaded Thumb Break system for extremely fast access to the firearm

▪ Uses our 3-D technology; holster will not collapse when the pistol is removed



▪ Barrel Ramp system

THE TRAVERSE


CRF-TTSA1S-2 2”-2.5” SUB-COMPACTCRF-TTSA1C-3 3”-3.5” COMPACTCRF-TTSA1F-4 4” FULLCRF-TTSA1F-5 5” FULL

The Traverse is an ambidextrous, conceal-carry holster that can be worn outside the waist band (OWB) or between the belt and pants. This holster is low-profile and uses our new “Speed-Retainer” system to hold the pistol in the holster securely. The Traverse can be worn on the left or right side in a traditional or crossdraw carry or just behind the side of the hip. The design angle is relaxed enough to accommodate easy reach from most positions and fits most semi-auto pistols.

▪ Fully-ambidextrous holster can be worn on left or right hip

▪ Conceal-Carry Holster that can be worn outside the waistband


▪ Uses our new “Speed-Retainer” system for extremely fast access to the firearm

▪ Wide-offset and sturdy belt loops



SH

OO

TIN

G G

EA

R

HOLSTERS THE STEALTH

LOW PROFILE REVOLVER SERIES

CRF-TSRV1S-8 2”-8” SMALL FRAMESCRF-TSRV1M-8 2”-8” MEDIUM FRAMESCRF-TSRV1L-8 2”-8” LARGE FRAMESCRF-TSRV1X-8 4” X-LARGE FRAMES

The Stealth is a very low-profile holster that contours to the hip and allows for a very comfortable carry. The holster uses our “Spring-Loaded Thumb Break” system to retain the firearm securely. The Stealth is also ambidextrous and can be worn on the left or right side in a traditional or crossdraw carry. Fits most revolver sizes and works well for the shooting enthusiast that only needs a hip/waist carry holster.

▪ Retainer strap can be removed and switched to the opposite side for left- and right-handed shooters




▪ Very thin, compact design, wear concealed or non-concealed outside the waist band

▪ Ambidextrous Spring-loaded Thumb Break is fully-adjustable for a perfect fit

THE CLIP-ON


CRF-CLPONSA1S-2 2”-2.5” SUB-COMPACTCRF-CLPONSA1C-3 3”-3.5” COMPACTCRF-CLPONSA1F-4 4” FULLCRF-CLPONSA1F-5 5” FULL

The Clip-On is a very low-profile outside the waist band (OWB) holster. Designed to clip onto your belt or pants easily without the need to feed a belt through loops.


▪ Wide-Offset belt clips for stability

▪ Very compact design, wear concealed or non-concealed

▪ Memory-Type foam laminate material molds to your firearm to provide a custom fit

▪ Holster cavity creates a compression fit

▪ 1680 denier ballistic Nylon

THE VAPOR AIR


CRF-TVASA1S-2 FITS M&P SHIELD™

The Vapor Air has been designed specifically to carry the Smith And Wesson M&P Shield™. It’s a very low-profile ergonomic holster. Its forward cant allows for an easier conceal and draw, and uses compression to keep the firearm retained. This holster flexes but keeps its shape and allows for easy insertion of the pistol back into the holster. The Vapor Air is a great conceal-carry holster that is worn outside the waist band (OWB).

▪ Contoured shape curves with shape of your hip



THE RHINO


CRF-TRSAS-2 2”-2.5” SUB-COMPACTCRF-TRSAC-3 3”-3.5” COMPACTCRF-TRSAF-4 4” FULLCRF-TRSAF-5 5” FULL

The Rhino is a fully-ambidextrous holster with an enclosed bottom. This holster uses our new “Speed-Retainer” to keep the firearm secure. The Rhino is low-profile and can be worn on the left or right side in a traditional or crossdraw carry and fits most semi-auto pistols.



▪ Very thin, compact design, wear concealed or non-concealed outside the waist band

▪ Extremely fast access to the firearm with our new Speed-Retainer system


▪ Enclosed-bottom for the shooting enthusiast who prefers a sealed holster


SH

OO

TIN

G G

EA

R

HOLSTERS

THE JURY

LOW-PROFILE REVOLVER SERIES

CRF-TJRV25MF 2.5” CHAMBER, 2.5” BARRELCRF-TJRV3MF 2.5” CHAMBER, 3” BARREL CRF-TJRV33MF 3” CHAMBER, 3” BARREL

The Jury is a very low-profile revolver holster specifically designed to carry the Taurus® Judge® series revolvers.

▪ Countoured shape without extra bulk and very compact to wear concealed or non-concealed

▪ Speed-Retainer for safely securing and giving extremely fast access to the firearm

▪ Memory type foam laminate technology molds to the gun, providing a custom fit


▪ Sturdy belt loop



THE WRAP

CONCEAL-CARRY ANKLE HOLSTER

CRF-WRPSA1M 1”-1.5” MICROCRF-WRPSAIS-2 2”-2.5” SUB-COMPACT

The Wrap is an ergonomic and low-profile ankle holster. For gun carriers who need deep concealment options and prefer an ankle holster. Confidently conceal-carry with quick access to your firearm when you need it.

▪ Fits ankles up to 16” circumference

▪ Neoprene body offers high level of comfort and flexibility, plus acts as a moisture barrier

▪ Uses our popular “3-D” pancake technology; cavity allows firearm to be re-holstered with ease

▪ Adjustable Spring-Loaded Thumb Break

▪ Attachable and removable calf leg strap

▪ Padded and protected anklebone area

▪ Sheepskin lining for comfort

THE GRIP LASER

LOW PROFILE CONCEAL-CARRY SERIES

CRF-GRPLSRSA1M-1 1”-1.5” MICROCRF-GRPLSRSA1S-2 2”-2.5” SUB-COMPACTCRF-GRPLSRSA1C-3 3”-3.5” COMPACT

The Grip Laser is designed to be an inside the waist band (IWB) or pocket conceal-carry holster and accommodates most trigger guard mounted lasers. Rubber grip fabric maximizes grip to the pants and belt; securely holds and reduces any movement. A closed bottom design keeps lint and other items out of the barrel. We have two varieties to choose from; the Grip Laser and the Grip Clip Laser which features our spring-steel belt clip.

▪ Fits Crimson Trace®, Lasermax, Laserlyte®, and more

▪ Fully-ambidextrous

▪ Accommodates most trigger guard mounted lasers

▪ Holster cavity creates compression fit





THE TEMPEST LASER


CRF-TPSTSA1M-1 1”-1.5” MICROCRF-TPSTSA1S-2 2”-2.5” SUB-COMPACTCRF-TPSTSA1C-3 3”-3.5” COMPACT

The Tempest Laser is designed to be an inside the waist band (IWB) conceal-carry holster, same features as the Tempest, plus accommodates most trigger guard mounted lasers. Designed for extreme comfort, this holster is small, low-profile, and uses a comfort panel; you’ll almost forget it’s there.

▪ Fits Crimson Trace®, Lasermax, Laserlyte®, and more

▪ Designed to be very comfortable to wear for extended lengths of time

▪ Padded neck riser keeps your firearm from touching your body

▪ Fits inside the waist band with an exterior pant clip

▪ New “3-D” Holster design will not collapse when the pistol is removed



▪ Moisture barrier with comfort mesh


SH

OO

TIN

G G

EA

R

HOLSTERS

THE KODIAK SEMI-AUTO

CHEST-MOUNTED HOLSTER SERIES

CRF-KDKSA1F-4 4” FULLCRF-KDDSA1F-5 5” FULL

The Kodiak Semi-Auto chest-mounted shoulder holster is stable and easy to adjust to your preferred position – carry vertical or on an angle.

▪ Magazine Pouch fits single or double stack

▪ Slide shoulder strap with breathable Spacer Mesh back


THE KODIAK REVOLVER

CHEST-MOUNTED HOLSTER SERIES

CRF-KDKREV4MF 4” MEDIUMCRF-KDKREV4LF 4” LARGECRF-KDKREV6MF 6” MEDIUMCRF-KDKREV6LF 6” LARGE

The Kodiak Revolver is an incredibly stable chest-mounted shoulder holster. This holster is easy to adjust and position - carry vertical or on an angle.

▪ Four point D-Ring connection system for easy adjustment

▪ Slide shoulder strap with breathable Spacer Mesh back

▪ Adjustable Spring-loaded thumb break

▪ Removable Speed-loader pouches

▪ Wide platform makes all day carrying easy and comfortable


THE JACKAL


CRF-TJSADL1S-2 2”-2.5” SUB-COMPACTCRF-TJSADL1C-3 3”-3.5” COMPACTCRF-TJSADL1F-4 4” FULLCRF-TJSADL1F-5 5” FULL

The Jackal is a low-profile drop leg holster designed to stay stationary and stable on your leg even in the most demanding conditions. The Jackal is easily adjustable, fast, and secure.

▪ Right and left sizing options

▪ Quick release buckle system

▪ Adjustable Spring-loaded thumb break


▪ Uses our popular “3-D” Pancake technology; cavity will not collapse when pistol is removed

▪ Rubberized grip fabric on backside of holster



THE DEFENDER

HOME PROTECTION SERIES

CRF-DFNDSA1

The Defender is designed to hold your firearm close to the bed. Rubber grip fabric maximizes grip to the mattress; holding securely and reducing movement.

▪ Sturdy construction with plastic base frame

▪ Fits securely between bed mattresses; rubber exterior fabric that grips the mattress



▪ Low-Profile




SH

OO

TIN

G G

EA

R

HOLSTERS

THE OUTLANDER

VERSA-HOLSTER SEMI-AUTOMATIC PISTOL SERIES

CRF-TOSA1F-4 4” FULLCRF-TOSA1F-5 5” FULL

The Outlander is a low-profile Versa-Holster that easily converts from a hip/belt holster to a fully-functional and ambidextrous shoulder holster system. Wear this holster in a crossdraw or traditional carry configuration. It uses our “Speed-Retainer” system to retain the firearm securely and fits most semi-auto pistols.

▪ Conceal-Carry Holster that can be worn outside the waist band

▪ Ergonomic padded shoulder pad that curves to the shape of your shoulders

▪ Memory-type foam laminate technology, molds to the gun providing a custom fit

▪ D-ring connection docking system for connecting the shoulder harness to the holster

▪ Enclosed-bottom for the shooting enthusiast who prefers a sealed holster



THE EQUALIZER

VERSA-HOLSTER REVOLVER SERIES

CRF-EVH3MF 3” CHAMBER, 3” BARREL

Designed specifically to fit the Taurus® Judge®, the Equalizer is a fully-ambidextrous and convertible shoulder/hip holster system and uses our “Speed-Retainer” system to secure the firearm. The Equalizer is low-profile, making it easy to be worn on the left or right side in a crossdraw or traditional carry.

▪ Converts from a hip holster to a shoulder holster

▪ D-ring connection docking system for connecting the shoulder harness to the holster

▪ Ergonomic padded shoulder pad

▪ Uses our adjustable “Speed-Retainer”


▪ 1680 Denier Ballistic Nylon fabric; durable and retains its shape

THE ALASKAN


CRF-AVH8MF 2”-8” MEDIUMCRF-AVH8LF 2”-8” LARGECRF-AVH9XF 4”-9” X-LARGE

The Alaskan is a low-profile Versa-Holster that converts from a hip/belt holster system to a fully-functional shoulder holster system. The Alaskan is also a fully-ambidextrous holster system that can work as a crossdraw or traditional carry configuration.

▪ Ergonomic padded shoulder pad that curves to the shape of your shoulders

▪ Uses our new “Speed-Retainer” system for extremely fast access to the firearm


▪ Switch between hip & shoulder carry



THE LAWMAKER


CRF-LVH3LF FITS S&W® GOVERNOR®

The LawMaker is designed specifically for S&W® Governor® series revolvers; a very low-profile Versa-Holster that converts from a hip holster to a shoulder holster in a matter of seconds. The holster is ambidextrous and can be worn on either side of the body as well as traditional or crossdraw configuration. The LawMaker uses our new “Speed-Retainer” system to retain the firearm securely; or can be replaced with optional “Spring-Loaded Thumb Break”

▪ Ergonomic padded shoulder pad

▪ Memory-type foam laminated technology molds to the gun providing a custom fit

▪ Detachable ammo pouch



(Holster shown with our “Speed-Retainer)

THE RUGER® 10/22® RELEASE LEVER


CRF-R1022MFL

The Ruger® 10/22® Release Lever is a low-profile and ambidextrous magazine release lever. Easy to install, drop-in replacement in just a few minutes. Low-profile design; sits directly in front of trigger guard. Access lever from left or right side of rifle and will not snag or catch on other items. Lever action only requires 1” finger movement to release/drop rifle magazine.

▪ Ambidextrous design allows lever access from left or right side of rifle.

▪ Low-profile design will not snag or catch on other items.


SH

OO

TIN

G G

EA

R

Documents

HOLSTERS - GSM Outdoors · The Impact is an inside the waist band IWB conceal carry holster, is comfortable, small, low-profile, and ambidextrous which allows you to wear it on your