Upload
lenhu
View
215
Download
1
Embed Size (px)
Citation preview
For all enquiries, please contact:Lomax Hoarding and Fencing Systems
1300 0 LOMAX 1 3 0 0 0 5 6 6 2 9
lomaxhoarding.com lomaxfencing.com
LOMAX HOARDING AND FENCING SYSTEM™
The smartest freestanding solution™
Product information
• AS
4687 compliant •One
counter-weight
solution for
both hoarding
& fencing• Engineer pre-certifie
d •
32mm OD fence post holes means it can be used for both hoarding and fencing, as one multi-tasking solution.
Angled brick design allows fence posts to
have a 90 degree angle for cornersUnique interlocking shape designed
to prevent any movement when stacked
Stud recess holds a standard 4x2 MPG 10 timber stud (non-ribbed stud)
Patented tamper-proof plates, uniquely designed to lock pine studs in place
Supports cross bracing so the hoarding won’t ‘snake’ out of position once it’s installed
Easy to carry handles
LOMAX HOARDING AND FENCING SYSTEM FEATURESThe smartest freestanding solution™
WHY CHOOSE THE LOMAX SYSTEM? IT’S COMPACT – At only 46cm deep, it’s the narrowest free-standing product on the market
IT’S PRE-CERTIFIED – With a pre-certified design you just follow the instructions for an engineer pre-certified solution every time
IT’S FREE-STANDING – no fixings to floors or ceilings up to 6mH
IT’S SMARTER – Only requires standard “off the shelf” 4x2 MPG 10 timber (non-ribbed) for compliance
IT’S LIGHT – Requiring less weight per m2 to build when fitted with the support post, making transport easier and cheaper
IT’S STABLE – Once installed, the support post creates a high fulcrum point giving enhanced stability with the least amount of weights
IT’S SIMPLE – Very easy modular build process
IT’S EASY – Easy assembly and easy to move around – great for staging projects
IT’S GREAT VALUE – Very cost effective
IT’S FLEXIBLE – Can easily work with stairs or uneven surfaces
IT’S TAMPER-PROOF – once installed, it cannot be modified without removing the panel first – no safety tags required
IT’S MULTI-TALENTED – the first product that offers both hoarding and fencing configurations from the same counter-weight
Details CommentsEngineer Designed and Pre-Certified to: AS 4687:2007 AS1170.1 and 1170.2Panel Height Options Internal – 1.2mH to 6mH (Free-standing), >6mH requires bracingPanel Thickness Options 12mm (Min Standard) to 150mmPanel Type Options Mdf, Ply, Melamine, EPS, Fire ratedCounter-weight Approx 18Kg eachStud Requirements 90x45mm (4x2) MPG 10 (non-ribbed)Screw Requirements Min 8gScrew Spacing 100mm from top and bottom of panel – then each 500mm in between
SYST
EM
SPEC
IFIC
ATIO
NS
AND
DESI
GN
ASSEMBLE IMPACT CERTIFIED AND WIND-RATED HOARDING IN 5 SIMPLE STEPS: 2. Insert standard 4x2
non-ribbed timber stud
4. Attach min standard 12mm panels3. Install LOMAX support
post if required 5. Add cross beams if required, for increased stability
1. Stack LOMAX counter-weights
USER TO FOLLOW SPECIFIC GUIDE FOR COUNTER-WEIGHT QUANTITY REQUIREMENT Simply increase the weight quantity for additional panel height or wind speed requirement
IMPACTED-RATED MODULAR CONFIGURATIONS
KIOSK HEIGHT (1.2MH) (INTERNAL)
IMPACTED-RATED (INTERNAL) FRONT
IMPACTED-RATED (INTERNAL) BACK
CONSTRUCTION PORTAL (INTERNAL)
All hoarding and fencing configurations have been constructed, tested and certified by engineers for compliance
Free-stands up to 6mH
46cm
WIND-RATED MODULAR CONFIGURATIONS
WIND-RATED (EXTERNAL)
HIGH WIND-RATED (EXTERNAL)
CONSTRUCTION PORTAL (EXTERNAL WIND RATED)
Designed to: exceed AS4687 and AS1170 requirements; and free-stand with no fixing to floors or ceilings
The Lomax Hoarding and Fencing System™ offers the simplest free- standing external wind-rated hoarding solution available. It’s modular by design, easy to install or modify for staging works, and is fully compliant to AS4687 and AS1170.The patented support post cleverly inserts into the counter-weight, increasing the height of the fulcrum point, to offer unrivalled stability from the least amount of counter-weights required.The entire solution free-stands without requiring any top-bracing, and in it’s smallest configuration with a single stack of weights it has a footprint of only 46cm in length.Building a wind-rated hoarding solution is very easy, simply follow our separate instruction guide and ensure the correct amount of counter-weights are applied and you’ll have a pre-certified and compliant solution every time.
Patented support post for increased stability
Optional cross beams for increased stability
THE EASIEST EXTERNAL WIND-RATED HOARDING BUILD PROCESS AVAILABLE
LOMAX™ – THE TRIP FREE FENCING SOLUTIONDue to the external nature of fencing installations that can vary by location, wind levels, shade-cloth and signage requirements, there is no single counter-weight guide solution can meet all scenarios. As such, the following Lomax Hoarding and Fencing System Solution is offered as a guide for all fencing deployments and additional guidance should be sought to ensure compliance prior to installation.
In addition, a common failing of traditional fencing solutions is that the counter-weight protrudes from the front of the fencing panel and can create a trip hazard in what is commonly a ‘pedestrian zone’. The Lomax Hoarding and Fencing Solution has been designed so that only 3cm of counter-weight protrudes and as such eliminates this hazard and offers a ‘Trip Free Fencing’ solution every time.
The first product that offers both hoarding and fencing configurations from the same counter-weight
Only 46cm deep
Only 3cm protruding
Standard 32mm OD fencing
Most job-sites have very limited working space, so keeping your fencing system counter-weight footprint as small as possible, and still maintaining compliance with a safe and stable solution, is top priority. Lomax Hoarding and Fencing understands this and so we have developed a unique interlocking half-brick counter-weight.
This smaller half-brick counter-weight cleverly stacks up on the rear of the regular full sized counter-weight, allowing you to ensure certification in different environments simply by adding more weights – all whilst keeping your system to an incredibly small 46cm footprint depth.
The Lomax Hoarding and Fencing solution can be implemented without the need for any protruding back-brace support system that generally increase the footprint of most standard fencing systems by up to 1m.
Simply follow our separate instruction guide to ensure the correct amount of counter-weights are applied and you’ll have a pre-certified and compliant solution every time.
THE HALF-BRICK COUNTER-WEIGHTFOR INCREASED STABILITY WHEN USED OUTDOORS
Only 46cm deep
A timber stud can be inserted through the counter-weight into the ground to mitigate weight or wind issue.
‘LOMAX’ FENCING COUNTER-WEIGHT GUIDE ONLY – INDIVIDUAL SITE CONDITIONS MUST BE CONSIDEREDLOCATION GUIDE
(TO BE USED WITH STANDARD 32MM OD FENCING PANEL)
WEIGHT QTY GUIDE (INDIVIDUAL SITE SPECIFIC CONDITIONS MAY CHANGE THIS GUIDE)
Suitable for Internal Use (not compliant to AS 4687 climb test) 2 x Full Lomax Counter-weightsSuitable for External Use (Guide – no shade cloth applied) 2 x Full Lomax Counter-weights + 1 x Half Brick Counter-weightsSuitable for External Use (Guide – possible shade cloth applied) 2 x Full Lomax Counter-weights + 2 x Half Brick Counter-weightsSuitable for Internal Use (Guide – high wind / possible shade cloth) 2 x Full Lomax Counter-weights + 3 x Half Brick Counter-weights
Individual site conditions / shade cloth / wind loadings vary – The above is a guide only
Only 3cm protruding