High Performance Alloys for Industry

8/12/2019 High Performance Alloys for Industry

1/8

High Performance

Metals for IndustryHigh Strength, High Temperatureand Corrosion-Resistant Alloys


2/8

1993 Acquisition ofJessop Steel makesAllegheny Ludlum afully integrated pro-ducer of specialtysteel plate products

1996 AlleghenyLudlum and Teledynecombine and becomeAllegheny TeledyneIncorporated. Thespecialty metals groupincludes AlleghenyLudlum, Allvac,Rodney Metals andWah Chang

1998 AlleghenyTeledyne acquiresaerospace division

of SheffieldForgemasters

1998 AlleghenyTeledyne acquiresOregon MetallurgicalCorporation(OREMET Titanium)

1999 AlleghenyTechnologiesIncorporated is formedconsisting of AlleghenyLudlum, Allvac, WahChang, Rome Metals,Metalworking Products,Casting Service, andPortland Forge

Allegheny Technologies manufactures flat-rolled titanium productsthrough Allegheny Ludlum, and long titanium products through its

Allvac operation.

Allegheny Technologies has facilities to Vacuum Arc Remelt (VAR),Electron-Beam Cold Hearth Refine (EBCHR) and Plasma Arc Melt(PAM) titanium ingots, slabs and electrodes. These melting optionsallow flexibility in processing raw materials, leading to higher yields,reduced lead times and lower processing costs.

Nickel-Based Alloys & Specialty Steels As one of the worlds largest U.S. producers of specialty metals, Allegheny Ludlum has worldwide capabilities to supply high quality advanced alloys for use in such components as thrust reversers, exhaustducting, welded tubing, piping systems, processing vessels and columns.

Our High Technology Alloys melting facilities provide our customers with flexible means of producing cleaner, highly alloyed iron-basedand nickel-based alloys. These facilities have a wide range of meltand remelt capabilitiesArgon Oxygen Decarburization (AOD),Vacuum Induction Melting (VIM), Vacuum Arc Remelting (VAR)and Electro-Slag Remelting (ESR)to produce alloy chemistries to

meet exacting customer specifications. We have the flexibility to use our processing equipment interchangeably to produce premium specialty steels, nickel-based, titanium-based, andcobalt-based alloys. Thus, we are a one-stop shop for our customersneeds regardless of alloy, melting process, or product form.

Photos above, top to bottom

FGD duct work

Continuous slab caster inBrackenridge, PA

Auger microscope for exactingmicroscopy

Hot rolling on the strip mill,Brackenridge, PA


3/8

1854 Steel Companyorganized to operatethe Pompton Furnace

1901 Incorporationof Allegheny Steel& Iron Company

1924 First patentawarded to Allegheny

Steel & Iron1938 Merger ofAllegheny SteelCompany and LudlumSteel Company createsAllegheny LudlumSteel Corporation

1944 High-tempera-ture alloy for aircraftturbines developed,major contribution tothe war effort and

future space travel1955 AlleghenyLudlum first commer-cialized superalloysmelted by a consum-able electrode vacuumremelting process

1956 Major expansionbrings all companyresearch work to

Brackenridge, PATechnical Center

1984 Patent issued forAL 29-4C alloy usedin residential furnaces

1985 Patent issuedfor AL6XN alloy

Allegheny Ludlum is a world leader in the production of flat-rolledtitanium-based alloys, nickel-based alloys and premium specialty steelsfor the aerospace, chemical, petrochemical, power, environmental,automotive and electronic industries. These alloys are available in avariety of product forms including plate, sheet, strip and foil, to meetyour unique production requirements.

Because Allegheny Ludlum adheres to strict quality standards and processcontrols, our metal products offer properties, such as exceptional

wear-resistance, corrosion- and heat-resistance, toughness and strength.

Titanium-Based AlloysProven to have the lowest life cycle cost in many applications,titanium complements our stainless steel and nickel-based products,and allows us to offer our customers more material options.

By acquiring Oremet Metallurgical Corporation in 1998, Allegheny Ludlums parent company, Allegheny Technologies Incorporated,significantly increased its melting capacity and options for titanium.Today, Allegheny Ludlum applies an extensive range of technology and business management resources to manufacturing titanium, andis positioned to provide you with competitive lead times and on-timedelivery performance.

A Single Source forHigh Performance Metals

Photos above, top to bottom

Our electron-beam furnace in Richland, WAis the largest in the U.S. Its able to processup to 8,000 pounds of titanium per hour.

The induction furnaces at AlleghenyLudlums Houston, PA plant are uniquelycapable of reheating titanium slabs andother spe cialty alloys prior to hot rollingon the Steckel mill.

Allegheny Ludlum titanium bands areprecision cold-rolled on a Sendzimir mill.

Our history from 1854 to the present


4/8

Available in plate, sheet and s tr ip. *Available in plate only.

Available in plate, sheet and strip. *Tempered ALTEMP is a registered trademark of ATI Properties, Inc.

A l l o y

A l l i a g

e

L e g i e

r u n g

E n d U

s e

U t i l i s

a t i o n

f i n a l e

E n d v

e r w e n

d u n g

C o m p

o s i t i o

n , n o m i

n a l w

t . %

C o m p

o s i t i o

n , %

p d s n

o m i n a

l

Z u s a

m m e n

s e t z u

n g , N o m i m

a l g e w i c h

t %

S p e c i f i c

a t i o n

s

S p c i f i c

a t i o n

s

T e c h

n i s c h

e D a t e

n

Nickel-Based Alloys

Titanium-Based Alloys

Grade 1UNS-R50250DIN 3.7025




6-4 (Grade 5)*UNS-R56400DIN 3.7164/5

6-4 ELI*UNS-R56401


Grade 9UNS-R56320

DIN 3.7195Grade 11UNS-R52250DIN 3.7225


Grade 16UNS-R52402

Grade 17UNS-R52252

Grade 18UNS-R56322

CPI equipment, industrial components, plate frame heat exchangers.

CPI equipment, condenser tubing, industrial components.

CPI equipment, heat exchangers, industrial components.

CPI equipment, industrial components, heat exchangers.

Blades, discs, rings, airframe, fasteners, components. Vessels,cases, hubs, forgings. Standard, rotor/ premium grades.

Applications requiring excellent fracture toughness and fatiguestrength; aircraft, structural components, biomedical.

Tubing, heat exchangers, CPI equipment.

Tubing, heat exchangers, industrial components.


Tubing, heat exchangers, industrial components, CPI equipment.

CPI equipment, condenser tubing, industrial components.


Tubing, heat exchangers, industrial components.

C 0.1 max Fe 0.2 max H 0.015 maxN 0.03 max O 0.18 max Ti bal




Al 6.5 max C 0.08 max Fe 0.3 max H 0.015 maxN 0.05 max O 0.2 max Ti bal V 4.0

Al 6.5 max C 0.08 max Fe 0.25 maxH 0.015 max N 0.03 max O 0.13 max Ti bal V 4.0

Ti Grade 2 + 0.2 Pd

Al 3.0 C 0.05 max Fe 0.13 H 0.015 max N 0.01O 0.1 Ti bal V 2.5

Ti Grade 1 + 0.2 Pd

Mo 0.3 Ni 0.8 Ti bal

Ti Grade 2 + 0.05 Pd



ASTM B-265ASME SB-265

ASTM B-265ASME SB-265AMS 4902


ASTM B-265AMS 4901

ASTM B-265; ASME SB-265AMS 4911MIL-T-9046

ASTM B-265, F-136; ASME B-265AMS 4907-4MIL-T-9046


ASTM B-265AMS 4943

ASTM B-265


ASTM B-265

ASTM B-265

ASTM B-265

AL 200/201UNS-N02200/N02201DIN (2.4066/2.4068)

AL 400UNS-N04400DIN (2.4360)

AL 600UNS-N06600DIN (2.4816)

AL 601UNS-N06601DIN (2.4851)

AL 800/800H/800ATUNS-N08800/N08810/N08811DIN (1.4876/1.4876 or 1.4958)

AL 276UNS-N10276DIN (2.4819)

AL 22UNS-N06022ALTEMP 718UNS-N07718DIN (2.4668)

ALTEMP 625UNS-N06625DIN (2.4856)

ALTEMP HXUNS-N06002DIN (2.4665)

AL 36UNS-K93600 or K93603

AL 42UNS-K94100

AL 4750UNS-K94800 or K95000

Moly Permalloy

Containers and piping in caustic soda and food processing plants.

Marine and dilute reducing environments for chemical or refiningprocess equipment, pumps, valves, fittings.

Furnace parts, heat treatment fixtures, chemical and food processingand nuclear reactors.

Heat treat baskets, muffles, retorts.

Heat exchangers, process piping, heat treat fixtures, furnace parts,and steam.

Pollution control, chemical processing, pulp & paper products, wastetreatment.

Flue-gas desulfurization systems, pulp and paper plants, wasteincinerators, sour gas service.Aircraft ducting, engine plumbing.

Jet engine nacelles, engine plumbing, aircraft ducting, recuperators,thrust reversers.

Jet engine combustion components, combustion cans, heat treatingequipment, annular combustion chambers, belts.

Membranes for LNG tankers, cryogenic piping, low expansion alloyfor bimetallic strip, mold plates for aircraft structural compositetooling.

Lead frames, color TB electron guns, glass-metal and ceramic-metalseals, transistors.

Magnetic relay parts, magnetic shielding, pole pieces, specialtymotor stators and rotors, electric transformers, magnetic amplifiers.

Cores and relay components for high sensitivity ground fault circuit

breakers, magnetic shields, and electric transformers.

Ni + trace

Cu 32.0 Fe 2.5 Ni 63.0

Cr 15.5 Fe 8.0 Ni 76.0

Al 1.35 Cr 23.0 Fe 14.0 Ni 60.0

Al 0.35 Cr 21.0 Fe 46.0 Ni 32.0 Ti 0.35

Cr 15.5 Fe 6.0 Mo 16.0 Ni 60.0 W 4.0

Cr 20.6 Fe 2.5 Mo 13.9 W 2.65 Ni bal

Cb 5.0 Cr 18.0 Fe 18.5 Mo 3.0 Ni bal Ti 1.0

Cb 3.8 Cr 22.0 Fe 4.0 Mo 9.0 Ni bal

Cr 21.0 Fe 18.5 Mo 9.0 Ni bal W 0.5

Fe bal Ni 36.0

Fe bal Ni 41.0

Fe bal Ni 49.0

Fe bal Mo 4.8 Ni 80.0

ASTM B-162ASME SB-162AMS 5533 (N02201 only)



ASTM B-168AMS 5870



ASTM B-575ASME SB-575ASTM B-670AMS 5596AMS 5597



ASTM B-753ASTM F-1684MIL-I-23011

ASTM F-30 (42)

ASTM A-753ASTM B-753

ASTM A-753

MIL-N-14411


5/8

T e n s i l e

S t r e n

g t h k s i . (

M P a )

R s i s t a n

c e l a t

r a c t i

o n k s i . (

M P a )

Z u g f e

s t i g k

e i t k s i . (

M P a )

0 . 2 %

Y i e l d

S t r e n

g t h k s i . (

M P a )

L i m i t e

l a s t i q u

e 0 . 2 %

k s i . (

M P a )

0 . 2 %

S t r e c k g

r e n z e

k s i . (

M P a )

H a r d n

e s s

D u r e t

H r t e

E l o n g

a t i o n

, %

A l l o n

g e m e

n t , %

D e h n

u n g ,

%in3 ( g / c m

3 )

Den s i t

l i v r e /

p o 3 ( g

/ c m 3 )

D i c h t e

l b / i n

3 ( g / c m

3 )

0.163 (4.52)

0.163 (4.52)

0.163 (4.52)

0.163 (4.52)

0.160 (4.43)

0.160 (4.43)

0.163 (4.52)

0.162 (4.49)

0.163 (4.52)

0.163 (4.52)

0.163 (4.52)

0.163 (4.52)

0.163 (4.52)

50 (345)

70 (483)

85 (585)

100 (690)

130 (900)

120 (825)

70 (483)

110 (760)

50 (345)

90 (620)

70 (485)

50 (345)

110 (760)

30 (206)

50 (345)

65 (450)

80 (550)

120 (828)

110 (760)

50 (345)

95 (655)

32 (221)

65 (450)

50 (345)

30 (206)

95 (655)

35

27

25

23

10

10

27

15

37

22

27

35

15

120 BHN

160 BHN

200 BHN

250 BHN

35 Rc

30 Rc

160 BHN

25 Rc

120 BHN

180 BHN

160 BHN

120 BHN

25 Rc

0.322 (8.92)

0.319 (8.84)

0.304 (8.42)

0.291 (8.06)

0.290 (8.03)

0.323 (8.95)

0.311 (8.62)

0.297 (8.23)

0.304 (8.42)

0.299 (8.28)

0.291 (8.05)

0.294 (8.15)

0.295 (8.17)

0.298 (8.25)

67 (462)/60 (415)

80 (550)

95 (655)

100 (690)

80 (550)/85 (585)

120 (825)

105 (724)

ANN. 130 (900)H.T. 195 (1345)

135 (930)

110 (760)

67 (462)

70 (485)

73 (503)

99 (682)*

21 (148)/20 (140)

40 (275)

45 (310)

50 (345)

40 (275)/45 (310)

60 (415)

50 (345)

ANN. 65 (450)H.T. 170 (1170)

70 (485)

55 (380)

38 (261)

40 (275)

30 (206)

49 (338)*

47/45

40

40

45

47/45

55

67

ANN. 45H.T. 17

45

50

32

28

38

32*

45 Rb

70 Rb

80 Rb

85 Rb

70 Rb

90 Rb

87 Rb

ANN. 95 RbH.T. 43Rc

95 Rb

90 Rb

75 Rb

55 Rb

55 Rb

80 Rb*

Typical annealed mechanical propertiesat room temperature. Hardness values arefor information only.For more detailed product information visit ourweb sites at www.alleghenyludlum.com andwww.alleghenytechnologies.com

Data are nominal and should not be construedas maximum or minimum values forspecification or for final design.Data on any particular piece of material mayvary from those shown herein.

ALLEGHENY LUDLUM SALES OFFICES

Plate Mill Plate & Continuous Mill Plate800-289-7528724-229-3710(FAX) 724-229-3775

Sheet800-258-3586724-226-6550(FAX) 724-226-6562

Standard Strip & Foil800-777-2822724-845-0440(FAX) 724-845-0691

Precision Rolled Strip Products & Foil800-225-8104508-996-5691(FAX) 508-984-8900

WORLDWIDE PHONE NUMBERS

Australia61-3-9205-9622(FAX) 61-3-9853-9066

China86-10-6512-0451(FAX) 86-10-6512-0453

France33 (0)1-55-66-8888(FAX) 33 (0) 1-47-81-8500

Germany49 (0) 211-513-5600(FAX) 49 (0) 211-513-56050

India91-22-282-6366(FAX) 91-22-283-7288

Japan81-3-3239-9080(FAX) 81-3-3239-9021

Korea82-2-538-3761(FAX) 82-2-538-3760

Singapore65-732-8771(FAX) 65-732-8358

Taiwan886-2-2922-2265(FAX) 886-2-2922-2269

United Kingdom44 (0) 114-272-0081(FAX) 44 (0) 114-273-1637

www.alleghenyludlum.comwww.alleghenytechnologies.com


6/8

ALTEMP 286UNS-S66286

ALLOY 21-6-9UNS-S21904DIN (1.4454)

AL 825UNS-N08825DIN (2.4858)

AL-6XN AlloyUNS-N08367

AL 15-5UNS-S15500DIN (1.4545)

AL 15-7*UNS-S15700DIN (1.4532)

AL 17-4UNS-S17400DIN (1.4548)

AL 17-7*UNS-S17700DIN (1.4568)

AL29-4C Alloy

UNS-S44735

AL 418*(Greek Ascoloy)

AL 20/20CB-3**UNS-N08020DIN (2.4660)

AL 904LUNS-N08904DIN (1.4539)

AL 2205UNS-S31803/S32205DIN (1.4462)

AM350*UNS-S35000

E-Brite AlloyUNS-S44627

ALLCORR UNS-N06110

AL 2003UNS (Applied for)

AL 263UNS-N07263DIN (2.4650)

AL 750UNS-N07750DIN (2.4669)

Jet engine nacelles (engine pods), jet engine parts and fasteners.

Aircraft hydraulic tubing.

Pollution control and radioactive waste equipment, chemicaltransport and acid production equipment, pickling equipment, oil/gaswell piping.

Condenser tubing, tanks in pulp & paper industry, CPI heatexchangers, sea water resistant.

Valve parts, fasteners, fittings, air frame parts.

Flat springs, bellows, diaphragms, fasteners.

Fasteners, air frame parts, valve parts, fittings.

Flat springs, bellows, diaphragms, fasteners.

Welded condenser tubing used in seawater in power generation

industry and other applications requiring extreme resistance tochloride ion pitting, crevice corrosion and stress corrosion cracking.

Engine braces, turbine exhaust components, exhaust struts,stiffeners, ducts.

Flue gas scrubbers, sulphuric acid tanks and racks, process piping,heat exchangers.

Home efficiency furnace heat exchangers, pulp & paper processingequipment.

Pipe, tubing in general corrosion and chloride stress corrosionenvironments.

Valves, aircraft tubing, bellows, mounts, brackets, ducts.

Solenoid valves, pressure vessels, coker components, heatexchangers, air preheaters, heat recuperators.

Chemical processing, oil and gas, petro-chemical processing, FGD,waste incineration.

Pipe, tubing in general corrosion and choride environments.

Land based gas turbines.

Gas turbine components, high strength fasteners.

Cr 14.0 Fe bal Mo 1.3 Ni 25.0 Ti 2.1

Cr 21.0 Fe bal Mn 9.0 Ni 6.5 N 0.3

Cr 21.5 Cu 2.0 Fe bal Mo 3.0 Ni 42.0

C .02 Cr 20.5 Fe bal Mo 6.5 Ni 25.0 N 0.2

Cr 15.5 Cu 3.4 Fe bal Ni 4.3

Al 1.0 Cr 15.0 Fe bal Mo 2.5 Ni 7.0

Cr 16.0 Cu 3.5 Fe bal Ni 4.5

Al 1.2 Cr 17.0 Fe bal Ni 7.0

Cr 29.0 Fe bal Mo 4.0 Ti+Cb 0.6

C 0.19 Cr 12.0 Fe bal Ni 2.0 W 2.5

Cr 20.0 Cu 3.3 Fe 40.0 Mo 2.2 Ni 33.0

Cr 20.5 Cu 1.5 Fe bal Mo 4.5 Ni 24.5

Cr 22.0 Fe bal Mo 3.0 Ni 5.5 N 0.16

C 0.08 Cr 16.5 Fe bal Mo 2.8 Ni 4.3

C 0.003 Cr 26.0 Fe bal Mo 1.0

Cr 30.0 Mo 11.5 W 2.0 Ni bal

Cr 20.0 Ni 3.0 Mo 1.7 N 0.17 Fe bal

Cr 20.0 Co 20.0 Mo 5.8 Ti 2.2 Ni bal

Cr 15.5 Fe 7.0 Ti 2.5 Cb 1.0 Ni bal

AMS 5525AMS 5858 (welding quality)

ASTM A-666AMS 5595



ASTM A-693ASME SA-693AMS 5862



ASTM A-693ASME SA-693AMS 5528AMS 5529 (cold rolled temper)

ASTM A-240

AMS 5508



ASTM A-240ASME SA-240


ASTM A-240ASME SA-240

ASTM B-755MRO 175

ASTM A-240

AMS 5872AMS 5886


Available in plate, sheet and strip.*Available in sheet and strip only

**Registered trademark of Carpenter Technology

ALTEMP, AL-6XN, Al 29-4C, E-Brite and ALLCORRare registered trademarks of ATI Properties, Inc.

A l l o y

A l l i a

g e

L e g i e

r u n g

E n d U

s e

U t i l i s

a t i o n

f i n a l e

E n d v

e r w e

n d u n

g

C o m p

o s i t i o

n , n o m i

n a l w

t . %

C o m p

o s i t i o

n , %

p d s n

o m i n a

l

Z u s a

m m e n

s e t z u

n g , N o m i m

a l g e w i c h

t %

S p e c i f i c

a t i o n

s

S p c i f i c

a t i o n

s

T e c h

n i s c h

e D a t e

nSpecialty Alloys


7/8

T e n s i l e

S t r e n

g t h k s i . (

M P a )

R s i s t a n

c e l a t

r a c t i o

n k s i .

( M P a

)

Z u g f e

s t i g k

e i t k s i . (

M P a )

0 . 2 %

Y i e l d

S t r e n

g t h k s i . (

M P a )

L i m i t e

l a s t i q u

e 0 . 2 %

k s i . (

M P a )

0 . 2 %

S t r e c k g

r e n z e

k s i . (

M P a )

H a r d n

e s s

D u r e t

H r t e

E l o n

g a t i o

n , %

A l l o n

g e m e

n t , %

D e h n

u n g ,

%

Typical annealed mechanical properties at room temperature. Hardnessvalues are for information only.For more detailed product information visit our web sites atwww.alleghenyludlum.com and www.alleghenytechnologies.com

Data are nominal and should not be construed as maximum or minimumvalues for specification or for final design.Data on any particular piece ofmaterial may vary from those shown herein.

in3 ( g / c m

3 )

Den s i t

l i v r e /

p o 3 ( g

/ c m 3 )

D i c h t e

l b / i n

3 ( g / c m

3 )

0.288 (7.98)

0.290 (8.03)

0.294 (8.14)

0.291 (8.06)

0.281 (7.78)

0.282 (7.81)

0.280 (7.76)

0.282 (7.81)

0.277 (7.67)

0.284 (7.87)

0.292 (8.09)

0.287 (7.95)

0.285 (7.90)

0.282 (7.81)

0.280 (7.76)

0.302 (8.33)

0.279 (7.72)

0.302 (8.33)

0.299 (8.28)

ANN. 95 (655)H.T. 164 (1130)

115 (795)

100 (690)

110 (760)

150 (1030)

130 (900)

150 (1030)

120 (830)

95 (655)

130 (900)

95 (655)

90 (620)

125 (860)

170 (1175)

80 (550)

105 (725)

105 (725)

H.T. 160 (1105)

ANN. 115 (795)H.T. 180 (1245)

ANN. 50 (345)H.T. 108 (745)

65 (450)

50 (345)

55 (380)

110 (760)

55 (380)

110 (760)

50 (345)

75 (520)

105 (725)

55 (380)

50 (345)

90 (620)

70 (485)

60 (415)

50 (345)

75 (515)

H.T. 92 (635)

ANN. 60 (415)H.T. 120 (825)

ANN. 40H.T. 25

45

40

45

10

30

8

35

22

15

38

40

30

30

25

55

40

H.T. 35

ANN. 45H.T. 20

ANN. 85 Rb

95 Rb

85 Rb

90 Rb

33 Rc

88 Rb

33 Rc

85 Rb

90 Rb

25 Rc

85 Rb

80 Rb

22 Rc

100 Rb

83 Rb

90 Rb

20 Rc

H.T. 26 Rc

ALLEGHENY LUDLUM SALES OFFICES

Plate Mill Plate & Continuous Mill Plate800-289-7528724-229-3710(FAX) 724-229-3775

Sheet800-258-3586724-226-6550(FAX) 724-226-6562

Standard Strip & Foil800-777-2822724-845-0440(FAX) 724-845-0691

Precision Rolled Strip Products & Foil800-225-8104508-996-5691(FAX) 508-984-8900

WORLDWIDE PHONE NUMBERS

Australia61-3-9205-9622(FAX) 61-3-9853-9066

China86-10-6512-0451(FAX) 86-10-6512-0453

France33 (0)1-55-66-8888(FAX) 33 (0) 1-47-81-8500

Germany49 (0) 211-513-5600(FAX) 49 (0) 211-513-56050

India91-22-282-6366(FAX) 91-22-283-7288

Japan81-3-3239-9080(FAX) 81-3-3239-9021

Korea82-2-538-3761(FAX) 82-2-538-3760

Singapore65-732-8771(FAX) 65-732-8358

Taiwan886-2-2922-2265(FAX) 886-2-2922-2269

United Kingdom44 (0) 114-272-0081(FAX) 44 (0) 114-273-1637

www.alleghenyludlum.comwww.alleghenytechnologies.com


8/8

Allegheny Technologies Incorporated (NYSE: ATI) is one of the largest and most diversified specialtymaterials producers in the world. The Companys talented people use innovative materials and processingtechnologies to offer growing global markets a wide range of specialty materials solutions.

Visit http://www.alleghenytechnologies.com

Allegheny LudlumAllegheny RodneyShanghai STALRome Metals

AllvacAllvac LtdTitanium International

WahChangMetalworking Products

StellramLandis Threading SystemsFirth SterlingFirth MPDTungsten ProductsAlldyne Powder Technologies

Portland ForgeCasting Service

C O M P A N Y D E S C R I P T I O N P H O N E

Allegheny Ludlum Manufactures high performance alloysincluding stainless steel, nickel-based alloys,titanium and titanium-based alloys.The company also produces grain-orientedsilicon electrical steel products and tool steelplate. It produces a broad selection of grades,sizes and finishes designed to meetinternational specifications and providestechnical support for material selection.

Allvac Manufactures high performance alloysincluding nickel-, cobalt-, titanium-,and iron-based alloys and specialty steels.Product forms include ingots, forging billet,

Allvac Ltd extrusion billet, round forging bar, roundmachining bar, custom rolled shapes, rod,redraw stocks, drawn coil and drawn rod.

Wah Chang Manufactures high performance alloysincluding pure and alloyed zirconium,vanadium, titanium, niobium and hafniumalloys. Product forms include ingot, slab,billet, bar, rod, tube, pipe, wire, sheet, strip,foil, forgings, castings, sponge and powder.

Allegheny TechnologiesSpecialty Metals Companies

800-258-3586 Stainless Steel, High Tech Alloy and724-226-6550 Titanium Sheet

800-289-7528 Stainless Steel, High Tech Alloy and724-229-3710 Titanium Plate, Mill Plate and

Continuous Mill Plate800-777-2822 Stainless Steel and High Tech Alloy724-845-0440 Standard Strip and Foil

800-225-8104 Stainless Steel, High Tech Alloy and508-996-5691 Titanium as Precision Rolled Strip

Products and Foil800-521-2696 Tool Steels724-229-3759

800-289-7454 Silicon Electrical Steel724-845-0257

800-841-5491704-289-4511

44-114-272-0081

888-926-4211541-967-9000

Starburst logo is a registered trademark of ATI Propertiies, Inc. 2002, Allegheny Ludlum

Documents

High Performance Alloys for Industry