Embed Size (px)
Citation preview
82
RA330®
RA333®
RA 602 CA®
RA 253 MA®
182
ALLOY
•
•
•
•
•
TIG[GTAW]
•
•
•
•
•
MIG[GMAW]
•
•
•
•
•
ELECTRODES[SMAW]
•
•
FLUX CORE[FCAW]
A5.14
A5.11, A5.14, A5.34
A5.11, A5.14, A5.34
A5.11
AWS
5836
AMS
ERNiCrFe-12
ERNiCrFe-3
ERNiCr-3
AWS CLASSIFICATION
Rolled Alloys Inc.
Your Premier High Performance Weld Wire Source!
High Performance Welding Wire
California: 800-321-0909
Connecticut: 860-687-2157
Illinois: 888-227-7862
Michigan: 800-521-0332
Ohio: 888-421-2580
Oklahoma: 866-664-4298
South Carolina: 866-211-7006
Texas: 800-728-1440
[email protected] | rolledalloys.com
800.521.0332 | rolledalloys.com
Rolled Alloys, RA, RA330, RA333 and ZERON are registered trademarks of Rolled Alloys • 602 CA is a register trademark of ThyssenKrupp VDM • T-800 is a registered trademark of Kennametal Inc. • 253 MA is a register trademark of Outokumpu Stainless • 230 is a registered trademark of Haynes International
© 2015 Rolled Alloys®
Bulletin No. 9015 01/19
The data and information in this printed matter are believed to be reliable. However, this material is not intended as a substitute for competent professional engineering assistance which is a requisite to any specific application. Rolled Alloys makes no warranty and assumes no legal liability or responsibility for results to be obtained in any particular situation, and shall not be liable for any direct, indirect, special, or consequential damage therefrom. This material is subject to revision without prior notice.
rolledalloys.com
Rolled Alloys, RA, RA330, and RA333 are registered trademarks of Rolled Alloys •602 CA is a register trademark of ThyssenKrupp VDM •253 MA is a register trademark of Outokumpu Stainless. The data and information in this printed matter are believed to be reliable. However, this material is not intended as a substitute for competent professional engineering assistance which is a requisite to any specific application. Rolled Alloys makes no warranty and assumes no legal liability or responsibility for results to be obtained in any particular situation, and shall not be liable for any direct, indirect, special, or consequential damage therefrom. This material is subject to revision without prior notice.
800.521.0332 | rolledalloys.com
Additional fabrication information for these alloys is available at rolledalloys.com
www.rolledalloys.com/technical-resources/fabrication-information/welding
Interactive weld wire selection tool.
Welding Wizardonline
Found within the Technical Resources area on our website, the Welding Wizard compliments a vast array of industry specific knowledge and expertise.
Experience the Welding Wizard for yourself at
