Professional-grade instruments for HVACR field service

Fit the Head to the TestThe ATH4 is included, but that’sjust the beginning. Use theheads that fit your tests best.

An Expert in Your Hip Pocket

Complete the INPUT FORM by performing the required tests, press OUTPUT to see the resultsand recommendations.

Download the latest software and firmware fromwww.fieldpiece.com. If a new refrigerant becomesavailable, we’ll be sure to implement them into ourlatest firmware.

BenefitsImproved Tech Performance

Reduce call backs.Faster testing.Easier analysis.Higher quality job.Perform wider range of tests with less backup technical support.Peace of mind knowing the job was done right.Upsell the CheckMe!® evaluation.

Standardized TestingFive guided tests ensure the job is done thesame way every time.Professional reports allow you to keep track ofyour customers' systems and gives verificationof your work.

FeaturesEasy to use INPUT/OUTPUT formscollect and analyze data.Automatically enter measurements using Fieldpiece accessory heads.Heads slide on top or connectwirelessly via the ET2W, or otherFieldpiece transmitters.Manual input when using non-Fieldpiece test equipment.CheckMe!® is a sophisticated airconditioning analysis program basedon data from 250,000 field tests.Upload test data to a PC. Recall tests when returning to thesame customer.

AAV3Air Velocity andTemperatureTESTS:CheckMe!CFM

ASX14Superheat andSubcoolingTESTS:CheckMe!SuperheatSubcooling

ARH4Digital PsychrometerTESTS:CheckMe!SuperheatSubcoolingTEET

AOX2Combustion CheckTESTS:Combustion

ACM3Carbon MonoxideTESTS:Combustion

HVACR TESTS

ADMN2Dual-Port ManometerTESTS:CheckMe!CombustionTEET

ACH4AC Current ClampTESTS:CheckMe!

SpecificationsWireless Range 100 feet approx.Wireless Channels Up to 12 simultaneousDC Ranges 500mVDC, 5VDC (auto)DC Accuracy ±(0.5% + 2dgts)AC Range 500mVAC, 5VAC (auto)AC Accuracy ±(0.8% + 6dgts)Input Protection Max 30VDC/24VACBattery 6 AA (installed)Battery Life 500 hrs typical alkalineTest Memory Up to 200 saved testsLogger Memory 100,000 data points

Professional-grade instruments for HVACR field service © Fieldpiece Instruments, Inc 2011

CFM: Test airflow ofreturn and supply grilles.

Setup: Adjust your HVAC Guidesettings and preferences.

CheckMe!: The mostadvanced Air Conditioning

diagnostic program.

Display: Connect anyaccessory head to read

directly on the LCD.

Superheat: Analyze the charge of a system by

comparing target superheatwith actual superheat.

Subcooling: Comparerecommended subcooling

to actual subcooling.

TEET: A better alternativeto the basic temp split.

Data Logger:Wirelessly log up to 12different measurements.

Service Light:Connect to communicatewith Fieldpiece A/C ServiceLight systems.

Combustion: Setupand tune furnaces or othercombustion equipment.

Model: HG3

Standard Mini USB CableConnect to USB port on your PCand upload test data.

Up to 13 Measurementsat the Same TimeConnect additional transmittersto your accessory heads, syncthem to your HG3, sit back andwatch them go to work for you.

Professional ReportsGenerate work orders withtime-stamped diagnostics andCustomer IDs that can be edited in spreadsheet software.

Wireless

Wireless

Wireless

Fill in the INPUT FORM View the OUTPUT FORM

Professional-grade instruments for HVACR field service

More effective HVAC installationand maintenance. Less reliance on off-site

technical assistance. Reduce call-backs . Increase profits.

Easier. Faster. Better.

ALSO INCLUDESATH4 Dual-temp HeadET2W Wireless TransmitterATWB1 ThermocoupleATA1 ThermocoupleANC8 Midsize CaseUSB CablePC Software

NEW for the HG3Wireless CommunicationDisplay for any Accessory HeadCubic Feet per Minute (CFM)A/C Service Light InterfaceMulti-Data LoggerLarger Case

HG3HG3

HG3

HG3

Wireless

HG3-box-v09:HG3-box-v09.qxd 1/11/2011 3:45 PM Page 1