Hewins Timber Winter Book

WINTER 2011/12 IssuE

introduction

Oak is one of the world’s most significant timbers, both past and present.

With man-made alternative building materials at large as never before, Oak continues to hold it’s own as one of the most durable, versatile, aesthetically pleasing materials - yet completely natural and renewable.

That’s one of the reasons why we support forestry schemes such as PEFC and FSC, to ensure that along with protecting the environment, this outstanding timber can continue to be used throughout the world.

Oak

For more information email [email protected]

PEFC/16 37-483

Promotingsustainableforest management

www.pefc.org

The European Oak Specialists

Intr

od

uc

tIo

n


Hewins Timber is a family run business which has grown with the continuous objective of providing a dedicated, specialist service to the joinery and construction markets. Ever since our beginnings in 1998, European Oak has remained the focal point of the company, developing in to the range of Oak products we provide today.

Our staff represent years of combined knowledge and practical experience throughout the timber trade, and we believe it to be of greatest importance that each gain a full understanding of the products we deal in, in view of a quality understanding between us, the supplier and you, the customer.

Hewins Timber

Constructional 3

For sales please call 01460 241777 fax 01460 241341

Kitchen Stock 45

Flooring & Interiors 49

Delivery & Location 64

Joinery Stock 23

Note: All prices shown are plus VAT and are subject to withdrawal/change without prior notice. All measurements in mm unless otherwise stated.Disclaimer: The information, photos and other content of this publication are indicative only. Wood is a natural product and variation in colour, grain, specification etc. will inevitably occur

Cladding & Exteriors 13

Stainless Steel Fasteners 57

Contents

2 /

3

Fresh Sawn A Grade .................................................4Fresh Sawn 1st Grade ..............................................6Fresh Sawn 2nd Grade ...........................................8Seasoned Beams .......................................................10Fresh Sawn Sleepers ..............................................12

EuroPEAn oAKconStructionAL

2 /

3

EuroPEAn oAK


Fresh Sawn A Grade


Fresh Sawn premium quality Oak sections for use on applications such as traditional house frames, where quality and appearance is critical. Sawn from the log to required sizes with a fine sawn finish as standard.

Grade overview Clear sections with tolerance of smaller knots and other defects. Limited sapwood to the edges. European Grade QPA. Full grading rules available on request.

Moisture content Varying, 40-70%

Wastage Allowance Not applicable

Supplied Finish Fine sawn

density 1200kg/m3 approx

Euro

PEA

n o

AK

FRE

SH S

AWN

A G

RAD

E


Fine Sawn finish

4 /

5

For other sections and/or longer lengths, contact our sales office for a specific quote. Prices negotiable on order volume/regularity.

All prices show

n are plus VAT

Sections (standard)(mm)

Length (m)0.50-3.99m£ per Lin Mtr

4.00 - 5.99m£ per Lin Mtr

100 x 100 9.44 11.35

200 x 100 18.88 22.70

150 x 150 21.24 25.53

250 x 150 35.40 42.56

175 x 175 28.91 34.76

200 x 200 37.76 45.40

225 x 225 47.79 57.45

250 x 250 59.00 70.93

EuroPEAn oAK


Fresh Sawn 1st Grade


Fresh Sawn Oak sections for use on general building, landscaping and other applications, where limited natural features are appreciated or of no object. Sawn from the log to required sizes with a fine sawn finish as standard.

Grade overview Largely clear sections with tolerance of knots and other natural defects. Sapwood up to half the face & limited wane permitted to the edges. European Grade QP1. Full grading rules available on request.






Euro

PEA

n o

AK

FRE

SH S

AWN

1ST

GRA

DE

Fine Sawn finish

6 /

7


All prices show

n are plus VAT




100 x 100 8.19 9.81

200 x 100 16.37 19.61

150 x 150 18.42 22.06

250 x 150 30.70 36.77

175 x 175 25.07 30.03

200 x 200 32.74 39.22

225 x 225 41.44 49.64

250 x 250 51.16 61.29

EuroPEAn oAK

Fresh Sawn 2nd Grade


Used predominantly for Fencing and Landscaping, Fresh Sawn Oak sections with tolerance of most natural features and defects, where quality and appearance are not critical. Sawn from the log to required sizes with a fine sawn finish as standard.

Grade overview Sections with tolerance of most natural features and defects, while maintaining structural soundness. Tolerance of sapwood to faces and wane to edges. European Grade QP2. Full grading rules available on request.






Euro

PEA

n o

AK

FRE

SH S

AWN

2N

D G

RAD

E

Fine Sawn finish

8 /

9


All prices show

n are plus VAT





100 x 100 6.36 7.62

200 x 100 12.73 15.25

150 x 150 14.32 17.15

250 x 150 23.87 28.59

175 x 175 19.49 23.35

200 x 200 25.46 30.50

225 x 225 32.22 38.60

250 x 250 39.78 47.65

EuroPEAn oAK

Seasoned Beams

Well suited to applications where movement must be kept to a minimum but the cost of joinery timber is not justified, or where an aged look is required. The beams are air dried in square sections for 1-3 years on average and can then be sawn to other sections as required. 100mm is the minimum thickness the beams can be sawn to while maintaining structural soundness.

Grade overview Ungraded production containing knots, sap content and other natural features. Drying splits and shakes develop during the seasoning period and can be quite substantial especially on larger sections. Providing the beam is structurally sound these are not considered a defect. Seasoned Beams are not recommended as suitable for Joinery applications.

Moisture content Variable. Between 30-50% (average)

Wastage Allowance Allow to be cut from square sections

Supplied Finish Fine sawn, weathered



Seasoned Beams

Euro

PEA

n o

AK

SEA

SON

ED B

EAM

S

natural finish Machined finish

All prices show

n are plus VAT

10 /

11

The beams are dried in the square sections above, but can be resawn to almost any size over 100mm min. thickness.Lengths available up to 8.50Mtrs. Contact our sales office for a specific quote. Prices negotiable on order volume/regularity.




100 x 100 9.98 12.11

125 x 125 15.59 18.92

150 x 150 22.45 27.24

200 x 200 39.91 48.43

225 x 225 50.51 61.30

250 x 250 62.35 75.68

300 x 300 89.79 108.97

Sleepers

EuroPEAn oAK


A quality product to enhance any landscaping project, our sleepers are cut fresh, providing clean faces. Due to the natural durability of Oak, these are well suited to exposed or water side applications.

Grade 2nd / 3rd grade





Fresh Sawn

Other sizes available - contact our sales office for a specific quotation. Prices negotiable on order volume/regularity.

All prices show

n are plus VAT

Size (length, width, thick)(mm) £ Each

2400 x 200 x 130 29.48

2400 x 225 x 130 33.17

2400 x 250 x 130 36.86

2400 x 275 x 130 40.54

Sleepers

12 /

13

EuroPEAn oAK

cLAdding & EXtEriorS

Feather Edge, Fresh Sawn .........................................14Waney Edge, Fresh Sawn ..........................................16ShipLap, Air Dried .............................................................18Capping Boards, Air Dried.................................... 20Shingles, Fresh Sawn........................................................22

12 /

13

EuroPEAn oAK


Feather Edge Cladding

Available in 4 standard widths, the clean lines of Feather Edge boards create a timeless look. Suited to period and modern projects alike, this cladding provides a durable barrier against the elements while enhancing the appearance of any building.

overlap required 25mm+ to allow for shrinkage

Wastage Allowance 10% recommended

Fixing Method Stainless steel nails/screws


recommended Finish Can be left natural, weathering to silver - grey over time. Otherwise seal with protective oil or similar product.

Fresh Sawn


Euro

PEA

n o

AK

FEA

THER

ED

GE

CLA

DD

ING


Feather Edge Cladding

Section 25mm-6mm

Lengths 2.00 - 4.00 Mtrs

Prices negotiable on order volume/regularity. Contact our sales office for a specific quote.

Fine Sawn finish

All prices show

n are plus VAT

14 /

15

Width(mm)

£ per LNRMtr

£ per M2

150 (125 face) 3.00 23.96

175 (150 face) 3.49 23.30

200 (175 face) 3.99 22.82

230 (200 face) 4.59 22.96

EuroPEAn oAK


Waney Edge Weatherboarding Fresh Sawn


Waney Edge Weatherboarding gives that classic traditional look while providing a durable barrier against the elements.

overlap required 50mm, allowing for varying

board width and shrinkage





Euro

PEA

n o

AK

WA

NEY

ED

GE

WEA

THER

BOA

RDIN

G


Waney Edge Weatherboarding

Widths Varying, average 200 - 250mm (face width 150-200mm)



Fine Sawn finish

All prices show

n are plus VAT

16 /

17

Thickness(mm)

£ per LM £ per M2

20 6.48 32.41

25 8.10 40.51

32 10.37 51.86

EuroPEAn oAK

The European Oak SpecialistsFor more information email [email protected] The European Oak Specialists

ShipLap Cladding

The ultimate in cladding, machined from Air Dried JoineryStock to ensure stability and minimise reaction to theelements. Air Dried cladding can be produced in variousprofiles and will provide a quality aspect wherever it isapplied, along with a durable barrier against the elements.

overlap required Dependant on profile - ShipLap is interlocking

Grade Produced from Joinery Grade Joinery Stock including some knots and defects



Supplied Finish Planed, unfinished


Air Dried

Euro

PEA

n o

AK

SH

IPLA

P C

LAD

DIN

G

The European Oak SpecialistsThe European Oak Specialists

ShipLap Cladding

Widths 145mm overall Appox 125mm face (Dependant on profile)Length 2.00 - 2.40 Mtrs


Planed finish

All prices show

n are plus VAT

18 /

19

Width(mm)

£ per LM £ per M2

145 (125 face) 6.68 53.44

EuroPEAn oAK

Capping Boards Air Dried

For use with direct glazing to Oak frames, our CappingBoards are carefully machined on all faces to provide a firm fit , while replicating the look of the internal frame to the exterior.Available with either a planed or fine sawn outer face tosuit the finish of the frame.

Grade Produced from Prime Grade

Joinery Stock

Wastage Allowance Dependant on application

Fixing Method Screw (stainless steel) & Plug

to packer material

Supplied Finish Planed back face and edges,

with either fine sawn or planed

front face


The European Oak SpecialistsFor more information email [email protected]

Euro

PEA

n o

AK

CA

PPIN

G B

OA

RDS

Capping Boards

20

/ 2

1

thickness 33mm


The sizes above are standard, other sizes are available on request.


All prices show

n are plus VAT

Fine Sawn finish

Width(mm)

Planed face£ per Lin Mtr

Fine Sawn face£ per Lin Mtr

100 16.82 17.82

125 20.19 21.44

150 23.55 24.85

175 26.92 28.32

200 31.29 32.89

225 35.66 37.56

250 40.03 42.03

Shingles

EuroPEAn oAK


Offering excellent thermal properties and outstanding durability, oak shingles provide a unique alternative form of roof and vertical cladding.

Fixing Method Stainless steel nails

Supplied Finish Riven

recommended Finish Natural, weathering to silver -grey over time.

thickness 16 - 22mm

Widths 60 - 140mm

Lengths 400 - 450mm


Fresh Sawn

£ per M2

Wall Cladding 54.88

Roofing 71.34

All prices show

n are plus VAT

Shingles

22

/ 2

3

EuroPEAn oAK

JoinErYStocK

Waney Edge

Kiln Dried Prime ...................................................................... 24Air Dried Prime ........................................................................ 26

Square Edge

Kiln Dried Prime ......................................................................... 28Kiln Dried Prime Super Wide .................................... 30Kiln Dried Joinery .................................................................. 32Kiln Dried Character .......................................................... 34Fixed Width Boards ............................................................ 36

Pre Sawn Sections ................................................... 38

Pre Planed Sections ............................................. 40

Laminated Sections .............................................. 42

22

/ 2

3

EuroPEAn oAK


Waney Edge Boards Prime GradeKiln dried


The original form of Kiln Dried Oak, Waney Edge provides thesawyer unlimited choice of cut, over against the ease, butlimitation of using Square Edge boards. Waney Edge stocksprovide great resource especially when procuring particularly long & wide requirements such as stair strings.

Grade overview Prime Grade Waney Edge boards providecuttings to the equivalent of Square Edge Prime Grade.European Grade QB1A.

Moisture content 13% (average)

Wastage Allowance 100% Recommended

Supplied Finish Rough sawn

density 700kg/m3


Euro

PEA

n o

AK

WA

NEY

ED

GE

KILN

DRI

ED

Prices negotiable on order volume/regularity. Wide board requirements (200mm+) may command a higher price, relative to overall order. Contact our sales office for a specific quote.

All prices show

n are plus VAT

24

/ 2

5

Thickness(mm)

£ per M3 £ per FT3

18/20 1571.43 44.50

27/26 1500.00 42.47

34/35 1581.43 44.78

40/41 1610.00 45.59

52/54 1628.57 46.12

65 1757.14 49.76

80 1921.43 54.41

100 2178.57 61.69

EuroPEAn oAK

Waney Edge Boards Prime GradeAir dried


Air Dried stock is seasoned naturally to achieve a moisture content relative to the outdoor environment. This makesit well suited to external applications such as gates, exposedexternal doors and balustrades. Due to the controlled and gradual seasoning process, Air Dried can be produced in Prime Grade up to 200mm thick, providing unrivalled quality for such large sections.

Grade overview Prime Grade Air Dried Waney Edge boardsprovide cuttings to the equivalent of Square Edge PrimeGrade, although Air Dried timber often shows splitting across the timber surfaces as a result of the natural seasoning process. This is not to be considered a defect. European Grade QB1A.

Moisture content 18-100mm 18-25% 120/150mm 25%+



density 800kg/m3


Euro

PEA

n o

AK

WA

NEY

ED

GE

AIR

DRI

ED


All prices show

n are plus VAT

26

/ 2

7

Thickness(mm)


18/20 1478.57 41.87

26/27 1400.00 39.64

34/35 1414.29 40.05

40/41 1428.57 40.45

54 1464.29 41.46

65 1600.00 45.31

80 1628.57 46.12

100 1699.49 48.12

120 2058.87 58.30

150 2433.21 68.90


EuroPEAn oAK


Our popular Prime Grade Square Edge is the benchmark for quality joinery manufacture. Available in an ever increasing range of sizes to reduce wastage and cater to the more demanding requirements such as staircase manufacture. Selected to order or supplied by the pack.Grade overview Straight grained planks, 3-4 sides clear and generally consistent in colour. European Grade QF1A.

Prices negotiable on order volume/regularity.

Square Edge Boards Kiln DriedPrime Grade

£ per M3

Thickness (mm)Lengths (m)2.1 - 2.99 3.0 - 4.19 4.2+

18/20 1514.29 1678.57 1878.57

26/27 1378.57 1464.29 1842.86

32/34 1514.29 1664.29 1992.86

38/41 1642.86 1642.86 2035.71

50/54 1714.29 1821.43 2192.86

63/65 2142.86 2357.14 2828.57

76/80 2435.71 2535.71 3092.86

100 3085.71 3285.71 3714.29

All prices show

n are plus VAT

Euro

PEA

n o

AK

SQ

UA

RE E

DG

E PR

IME

GRA

DE


Moisture content 13% (average)Wastage Allowance 40% RecommendedSupplied Finish Rough sawndensity 700kg/m3

Lengths 1.0 to 4.2m+ (see table below)Widths 100mm+ (Wide board requirements 200mm+ may be drawn from our Super Wide stock - details and prices over leaf)

All prices show

n are plus VAT

28

/ 2

9

£ per cuftThickness (mm)

Lengths (m)2.1 - 2.99 3.0 - 4.19 4.2+

18/20 42.88 47.53 53.19

26/27 39.04 41.46 52.18

32/34 42.88 47.13 56.43

38/41 46.52 46.52 57.64

50/54 48.54 51.58 62.09

63/65 60.68 66.75 80.10

76/80 68.97 71.80 87.58

100 87.38 93.04 105.18

EuroPEAn oAK


Produced for particularly demanding requirements such as staircase manufacture, our Super Wide production meets the need time after time. While providing the genuine single widths so often desired by the customer, these boards also save your time in the workshop, previously spent either laminating narrower widths or converting Waney Edge stock.

Grade overview Straight grained planks, 3-4 sides clear and generally consistent in colour. European Grade QF1A.




density 700kg/m3

Lengths 2.0 to 4.2m+ (check current stock)

Widths 220mm & wider

Square Edge Boards - Super WideKiln DriedPrime Grade

Euro

PEA

n o

AK

SQ

UA

RE E

DG

E PR

IME

GRA

DE

SU

PER

WID

E

The European Oak Specialists 30

/ 3

1

Square Edge Boards - Super Wide

All prices show

n are plus VAT

Prices negotiable on order volume/regularity.Contact our sales office for a specific quote.

Thickness(mm)


18/20 1819.87 51.53

26/27 1785.27 50.55

32/34 1930.58 54.67

38/41 1972.10 55.84

50/54 2124.33 60.15

63/65 2740.18 77.59

76/80 2996.21 84.84

100 3598.21 101.89

EuroPEAn oAK


Square Edge Boards

Joinery Grade provides a cost effective alternative to Prime,where light character features suit the production, or smallercomponents are being cut, therefore defects can easily beavoided. Available in a full range of thicknesses and selected to order or supplied by the pack.

Grade overview Largely clear straight grain planks including some knots , shakes and sap in part of each board. The boards will mostly be clear from defect enabling clear joinery sections to be produced or sections cut which may contain sound defects to be turned to an unseen face or cut around. European Grade QF1/2x.




density 700kg/m3

Kiln DriedJoinery Grade




Euro

PEA

n o

AK

SQ

UA

RE E

DG

E JO

INER

Y G

RAD

E

All prices show

n are plus VAT

32

/ 3

3

Thickness(mm)


18 1176.34 33.31

27 1092.86 30.95

34 1123.21 31.81

41 1153.57 32.67

50 1290.18 36.53

65 1616.52 45.77

80 1768.30 50.07

100 2458.93 69.63

EuroPEAn oAK


Square Edge Boards

Where a rustic appearance is required, our Character Grade provides the needed natural features and variation to compliment any such application. Available in a full range of thicknesses and selected to order or supplied by the pack.

Grade overview Sound planks containing some knots, shakes and sap that can be used to enhance the look of the finished product, or for use where the product is to be painted and defects are no object. European Grade QB2/3x.




density 700kg/m3

Kiln Driedcharacter Grade



Euro

PEA

n o

AK

SQ

UA

RE E

DG

E C

HA

RAC

TER

GRA

DE


All prices show

n are plus VAT

34

/ 3

5

Thickness(mm)


18 1053.35 29.83

27 1001.79 28.37

34 1053.35 29.83

41 1127.01 31.91

50 1222.77 34.62

65 1568.97 44.43

80 1716.29 48.60

100 2386.61 67.58

EuroPEAn oAK


Fixed Width Boards Kiln Driedcharacter Grade


For large repetitive requirements such as internal doors,panelling etc, our Fixed Width Character Grade productionoffers a low wastage and time efficient solution.

Grade overview Sound planks containing some knots or features that can be used to enhance the look of the finished product, or for use where the product is to be painted and defects are no object. European Grade QB2/3x.


Wastage Allowance Variable dependant

on application


density 700kg/m3


Euro

PEA

n o

AK

FIx

ED W

IDTH

BO

ARD

S


All prices show

n are plus VAT

36

/ 3

7

Thickness (mm) £ per M3 £ per FT3

27 x 100 928.57 26.29

27 x 120 928.57 26.29

27 x 140 928.57 26.29

27 x 160 1042.86 29.53

27 x 180 1042.86 29.53

27 x 200 1100.00 31.15

27 x 220 1100.00 31.15

27 x 240 1100.00 31.15

27 x 260 1185.71 33.58

27 x 280 1185.71 33.58

27 x 300 1185.71 33.58

EuroPEAn oAK


Pre Sawn Sections


Already sawn to nominal sizes, our Pre Sawn sections take you astage closer to your finished product , only requiring final surfacepreparation before assembly.

Generally left slightly over length to ensure a satisfactory final cut by the customer in the workshop / on site.

This results in minimal processing once the timber is delivered toyou, providing a time efficient and therefore cost effective solution.

Our range of standard sections is listed opposite, but we canproduce to any achievable size on request.

Grade overview Straight grained planks, 3-4 sides clear and generally consistent in colour. European Grade QF1A




density 700kg/m3

Kiln DriedPrime Grade


Euro

PEA

n o

AK

PRE

SAW

N S

ECTI

ON

S

All prices show

n are plus VAT

38

/ 3

9

Other sizes & grades available - contact our sales office for a specific quotation. Prices negotiable on order volume/regularity.

Thickness(mm)

Width(mm) < 2.99m 3.0 - 4.19m 4.2m <

27 105 £6.29 £6.68 £8.41

27 155 £9.29 £9.87 £12.42

27 205 £15.91 £15.91 £18.89

27 235 £18.24 £18.24 £21.65

34 105 £8.70 £9.57 £11.45

34 155 £12.85 £14.12 £16.91

34 205 £21.66 £21.66 £25.72

34 235 £24.83 £24.83 £29.48

41 105 £11.39 £11.39 £14.11

41 155 £16.81 £16.81 £20.83

41 205 £26.69 £26.69 £31.68

41 235 £30.59 £30.59 £36.32

41 255 £33.20 £33.20 £39.41

54 105 £15.65 £16.63 £20.02

54 155 £23.10 £24.55 £29.55

54 205 £37.86 £37.86 £44.95

54 235 £43.40 £43.40 £51.52

65 85 £19.06 £20.97 £25.16

65 105 £23.55 £25.90 £31.08

65 155 £34.76 £38.23 £45.88

65 205 £58.79 £58.79 £69.78

65 235 £67.39 £67.39 £80.00

80 85 £26.67 £27.76 £32.80

80 105 £32.94 £34.29 £40.52

80 155 £48.63 £50.62 £59.82

80 205 £79.11 £79.11 £90.98

80 235 £90.69 £90.69 £104.29

100 105 £52.16 £55.55 £62.79

100 155 £77.00 £82.00 £92.69

100 205 £118.76 £118.76 £140.98

100 235 £136.14 £136.14 £161.61

Length (Metres)

EuroPEAn oAK

Pre Planed Sections


Bring your requirements as close to assembly stage as possiblewith our Pre Planed Sections. You’ll never look back.

Following the sawing process, the pieces are carefullyplaned all round to final sizes. Each individual piece is generally left slightly over length to ensure a satisfactory final cut by the customer in the workshop / on site.

Our range of standard sections is listed opposite, but we canproduce to any achievable size on request.

Grade overview Straight grained planks, 3-4 sides clear and generally consistent in colour. European Grade QF1A.



Supplied Finish Planed all faces, unfinished

density 700kg/m3


Kiln DriedPrime Grade

Euro

PEA

n o

AK

PRE

PLA

NED

SEC

TIO

NS

40

/ 4

1

Other sizes & grades available - contact our sales office for a specific quotation. Prices negotiable on order volume/regularity.


All prices show

n are plus VAT

Thickness(mm)

Width(mm) < 2.99m 3.0 - 4.19m 4.2m <

19 95 £7.79 £8.18 £9.91

19 145 £10.79 £11.37 £13.92

19 195 £17.91 £17.91 £20.89

19 225 £20.74 £20.74 £24.15

25 95 £10.20 £11.07 £12.95

25 145 £14.35 £15.62 £18.41

25 195 £23.66 £23.66 £27.72

25 225 £27.33 £27.33 £31.98

32 95 £12.89 £12.89 £15.61

32 145 £18.31 £18.31 £22.33

32 195 £28.69 £28.69 £33.68

32 225 £33.09 £33.09 £38.82

32 245 £35.70 £35.70 £41.91

45 95 £17.15 £18.13 £21.52

45 145 £24.60 £26.05 £31.05

45 195 £39.86 £39.86 £46.95

45 225 £45.90 £45.90 £54.02

57 75 £20.56 £22.47 £26.66

57 95 £25.05 £27.40 £32.58

57 145 £36.76 £40.23 £47.88

57 195 £61.29 £61.29 £72.28

57 225 £69.89 £69.89 £82.50

72 75 £28.17 £29.26 £34.30

72 95 £34.44 £35.79 £42.02

72 145 £50.63 £52.62 £61.82

72 195 £81.61 £81.61 £93.48

72 225 £93.19 £93.19 £106.79

90 95 £53.66 £57.05 £64.29

90 145 £78.50 £83.50 £94.19

90 195 £120.76 £120.76 £142.98

90 225 £138.64 £138.64 £164.11

Length (Metres)

EuroPEAn oAK

The European Oak SpecialistsFor sales please call 01460 241777 fax 01460 241341

Laminated SectionsKiln DriedPrime Grade

Laminated Sections are built up from a number of smaller pieces glued and pressed together, creating a very stable alternative to traditional solid production. Available in a range of standard stair, door and window sizes to provide the ultimate in ease and speed of handling & processing.

Grade PrimeMoisture content 10-13% (average)Wastage Allowance Variable, dependant on applicationSupplied Finish Planed all faces, unfinisheddensity 700kg/m3


Euro

PEA

n o

AK

LA

MIN

ATED

SEC

TIO

NS

All prices show

n are plus VAT

* Only available in American White Oak - POA.Window and Door sections overleaf.

42

/ 4

3

Laminated Stair Components £ per LM

Newels 90 x 90 1.50 - 1.80 28.60

Newels 90 x 90 2.10 - 2.4 30.55

Newels 90 x 90 3.00 - 3.60 31.20

Strings 32 x 275 Various 48.10

Treads 32 x 275 1.00 - 1.20 33.80

Risers 18 x 225 1.00 - 1.20 *

Handrail 57 x 82 4.20 *

EuroPEAn oAK


Laminated Sections cont.Kiln DriedPrime Grade

All prices show

n are plus VAT

Laminated Window Components £ per LM

Frame 63 x 75 1.00+ 13.13

Frame 63 x 95 1.00+ 16.58

Frame 72 x 75 1.00+ 15.60

Frame 72 x 86 1.00+ 17.55

Frame 72 x 95 1.00+ 18.20

Frame 84 x 95 1.00+ 22.36

Frame 96 x 63 1.00+ 15.44

Frame 96 x 75 1.00+ 19.63

Laminated Door Components £ per LM

Stile 48 x 95 2.1+ 15.43

Stile 48 x 120 2.1+ 19.59

Rail 48 x 200 1.0/1.2 33.45

Stile 63 x 95 2.1+ 16.33

Stile 63 x 120 2.1+ 23.05

Rail 63 x 200 1.0/1.2 42.90

Stile 72 x 95 2.1+ 18.20

Stile 72 x 120 2.1+ 25.13

Rail 72 x 200 1.0/1.2 48.10

Frame 96 x 63 2.0+ 15.96

Frame 96 x 75 2.0+ 19.59

Square Edge Component Blanks........................ 46

EuroPEAn oAK

KitcHEnStocK

44

/ 4

5

KITCHEN PRODUCTS

EuroPEAn oAK

The European Oak SpecialistsFor sales please call 01460 241777 fax 01460 241341

Square Edge Component BlanksKiln Driedcharacter Grade

Shorter length, fixed width Oak blanks to compliment small component manufacture such as kitchen doors, drawer fronts etc. These boards are produced in Character Grade, in a variety of widths & lengths to closely match requirements, minimizing wastage.

Grade overview Sound planks containing some knots or features that can be used to enhance the look of the finished product, or for use where the product is to be painted and defects are no object. European Grade QB2/3x.

Moisture content 10-13% (average) Wastage Allowance Variable dependant on applicationSupplied Finish Rough sawndensity 700kg/m3

Available LengthsUp to 1.45 metres 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.41.50 to 1.95 metres 15, 1.6, 1.7, 1.8, 1.92.00 to 2.45 metres 2.0, 2.1, 2.2, 2.3, 2.4, 2.5

Euro

PEA

n o

AK

SQ

UA

RE E

DG

E BL

AN

KS


Prices negotiable on order volume/regularity. Contact our sales office for a specific quote. Continued overleaf

All prices show

n are plus VAT

46

/ 4

7

Section size (mm)100/120 x 27


< 1.45m 714.29 20.23

1.5 - 1.95 764.29 21.64

2.0 - 2.50 814.29 23.06

Section size (mm)140 x 27


< 1.45m 714.29 20.23

1.5 - 1.95 785.71 22.25

2.0 - 2.50 857.14 24.27

Square Edge Component BlanksKiln Driedcharacter Grade

EuroPEAn oAK



All widths also available in 18mm thickness boards. Prices available on request.

All prices show

n are plus VAT

48

/ 4

8

Section size (mm)160/180/27


< 1.45m 757.14 21.44

1.5 - 1.95 871.43 24.68

2.0 - 2.50 985.71 27.91

Section size (mm)200/220/240x27


< 1.45m 757.14 21.44

1.5 - 1.95 928.57 26.29

2.0 - 2.50 1042.86 29.53

Section size (mm)250< x 27


< 1.45m 757.14 21.44

1.5 - 1.95 928.57 26.29

2.0 - 2.50 1100.00 31.15

48

/ 4

9

EuroPEAn oAKFLooring

& intEriorS

Oxford Solid Flooring ..................................................... 50Estrato Engineered Flooring .................................. 52Skirting & Architrave ....................................................... 54Door Linings .............................................................................. 55Flooring Accessories ....................................................... 56

48

/ 4

9

EuroPEAn oAK


Oxford Solid Oak Floorboards


The Oxford quite literally offers the best of both worlds: longlength boards combined with a range of impressive widthsto create a genuine yet bespoke floor of your choice, while giving the benefits of a modern flooring board at its best -exceptionally well machined for tight joins and ease of laying.

Grade Character gradeEdges Tongue & grooved, square shoulderedEnds Tongue & grooved, square shoulderedSupplied Finish Sanded, unfinishedWastage Allowance 10% recommendedFixing Method Secret nail, face nail/screw, glue downunder Floor Heating Not suitable


Oxford

Euro

PEA

n o

AK

OxF

ORD

FLO

ORB

OA

RDS

thickness 20mm

Lengths 1.80 – 3.20 metres


All prices show

n are plus VAT

clear oiled finish shown

50

/ 5

1

Width (mm) £ per M2

140 34.61

160 35.16

180 35.55

200 36.64

220 41.56

240 43.94


Estrato Engineered Oak Floorboards

EuroPEAn oAK


Estrato Engineered Oak floorboards offer a quality alternative to a solid floor where increased stability is required, for instance over under floor heating.

A 5.5mm solid Oak layer will allow for repeated sanding and finishing to ensure longevity comparable to a solid floor. Available square shouldered or with a micro bevel, in a range of impressive widths; and long lengths, the boards can be mixed and finished to create an entirely genuine looking floor of your choice.

Grade Character grade

Edges Tongue & grooved, square shoulder or with micro bevel

Ends T & G, square shldr or micro bevel

Supplied Finish Sanded, unfinished


Fixing Method Floating, Secret nail, face nail/screw, glue down

under Floor Heating Suitable, boards must be fully stuck down


Euro

PEA

n o

AK

EST

RATO

EN

GIN

EERE

D F

LOO

RBO

ARD

S

thickness 20.5mm

Lengths 1.00 - 2.50 metres, average 2.00 metres


All prices show

n are plus VAT

clear lacquered finish shown

52

/ 5

3

Width (mm) £ per M2

160 37.11

200 40.44

220 42.16

240 45.49

260 52.76

EuroPEAn oAK

For sales please call 01460 241777 fax 01460 241341 The European Oak Specialists

Skirting & ArchitraveSolid Oak

Designed to compliment both solid and engineered floorboards, our solid Oak Skirting and Architrave are essential for the genuine look. Produced from the same characterful board stock to provide interest and authenticity, we offer traditional popular styles as standard, but can match almost any profile required.Grade Character GradeLengths 1.80 - 3.20 metresStandard Profiles Ogee, Torus, ChamferSupplied Finish Machined, unfinished

All prices show

n are plus VAT


Width Price £

50 x 20mm 4.65 per LM

75 x 20mm 5.79 per LM

Architrave

125 x 20mm 6.86 per LM

145 x 20mm 7.96 per LM

175 x 20mm 9.53 per LM

Skirting

Euro

PEA

n o

AK

SKI

RTIN

G &

ARC

HIT

RAVE

/ D

OO

R LI

NIN

GS

54

/ 5

5

Get the basics right with our solid Oak Door Linings. Priced in single or double opening sets, the lining boards are supplied planed all round, ready for final machining and trimming to length, with door stop to match.

Once again, our standard sizes are listed below, but we can produce to bespoke sizes on request. Prices will vary.

Grade Joinery Grade Set consisting Single 2 x 2.1Mtr, 1 x 1.0Mtr Double 2 x 2.1Mtr, 1 x 2.0Mtr

Supplied Finish Planed all round, Unfinished


Door LiningsSolid Oak

Section (mm) Single £ Double £

130 x 25 66.26/set 77.95/set

130 x 32 75.50/set 88.82/set


EuroPEAn oAK


A selection of proven products for use with our flooring range.

Flooring Accessories

Powernail secret flooring nails

Powernail T Nails (16g x 50mm)Box/1000 £20.05 each

Superior quality barbed nails for use with hammer/power nailers to ‘secret nail’ flooring boards to joist/subfloor through the back of the tongue. Manual hammer nailer available for hire.

osmo Polyx hardwax flooring oil

Oil 2.5 L (Satin/Matt) £57.85

Oil 0.75 L (Satin/Matt) £19.75

The benchmark hardwax oil. Water repellant and dirt resistant. Clear finish available in either Satin or Ultra Matt for a very natural finish. 2 coat application. Coverage of approx 20m2 per litre per coat.

Sikabond t2 flooring adhesive

1 part flexible, gun applied adhesive, well suited to use with longer lengths of flooring or undulations in subfloor. Sausage gun available for hire. Coverage approx. 1m2 per 300cc.

T2 600cc Sausages £15.97

T2 300cc Cartridges £11.14

Bonatech Mega flooring lacquer

Lacquer 5L (Satin/Matt) £76.86

Lacquer 1L (Satin Only) £22.51

100% Polyurethane lacquer, providing a deep clear finish. High scuff resistance. Available in Matt/Satin/Gloss. 2-3 coat application. Coverage of approx 8-10m2 per litre per coat.

All prices show

n are plus VAT

56

/ 5

75

6 /

57

Stainless Steel Fasteners

Hex Head Screws ............................................ 58Bugle Head Screws ........................................ 61 Finishing Screws ............................................... 62Composite Deck Screws .............................. 63

Carpenters Mate® Stainless Steel Products,a range of the finest quality, high grade & innovative Stainless Steel Timber Fastenings for everlasting fastening.

This range of Stainless Steel Fasteners addresses almost any timber fastening application where corrosion is apotential issue.

For coverage recommendation see page 63


Hex Head ScrewsStainless Steel

6.3 x 50mm Quantity £ per box

CM06-20-T02 20 £12.00

CM06-50-T02 50 £22.00

CM06-250-T02 250 £84.00


CM06-20-T03 20 £13.00

CM06-50-T03 50 £26.00

CM06-250-T03 250 £107.00


CM06-20-T04 20 £18.00

CM06-50-T04 50 £34.00

CM06-250-T04 250 £140.00


CM06-20-T05 20 £20.00

CM06-50-T05 50 £38.00

CM06-250-T05 250 £150.00

All prices show

n are plus VAT

The 316SS Hex Head Screw is the ultimate hex head fastener for use in outdoor, highly corrosive applications. Manufactured from 316 grade stainless steel which offers the ultimate corrosion resistance with uncompromised strength and drivability. The unique four cornered thread design reduces installation torque.

Available in 6.3mm and 9.5mm thread diameters and 75-300mm lengths, 20, 50 & 250 piece packs.

8mm and 13mm Hex Drive.

6.3mm diameter thread

A £15 standard postage charge applies to all orders for Carpenters Mate products under £500 (inc VAT) in value.


cA

rPEn

tErS

MAt

E H

Ex H

EAD

SC

REW

S 5

8 /

59

All prices show

n are plus VAT


CM06-20-T08 20 £34.00

CM06-50-T08 50 £68.00

CM06-250-T08 250 £238.00


CM06-20-T09 20 £40.00

CM06-50-T09 50 £74.00

CM06-250-T09 250 £260.00


CM06-20-T10 20 £44.00

CM06-50-T10 50 £78.00

CM06-250-T10 250 £284.00


CM06-20-T07 20 £30.00

CM06-50-T07 50 £62.00

CM06-250-T07 250 £230.00


CM06-20-T06 20 £26.00

CM06-50-T06 50 £54.00

CM06-250-T06 250 £218.00

9.5mm Dia. Hex Heads are overleaf.


6.3mm dia. continued



CM10-20-T03 20 £20.00

CM10-50-T03 50 £40.00

CM10-250-T03 250 £180.00


CM10-20-T04 20 £24.00

CM10-50-T04 50 £50.00

CM10-250-T04 250 £210.00


CM10-20-T05 20 £30.00

CM10-50-T05 50 £60.00

CM10-250-T05 250 £270.00


CM10-20-T06 20 £36.00

CM10-50-T06 50 £72.00

CM10-250-T06 250 £324.00


CM10-20-T08 20 £48.00

CM10-50-T08 50 £122.00

CM10-250-T08 250 £545.00


CM10-20-T10 20 £64.00

CM10-50-T10 50 £148.00

CM10-250-T10 250 £608.00


CM10-20-T12 20 £84.00

CM10-50-T12 50 £180.00

CM10-250-T12 250 £750.00

All prices show

n are plus VAT

Hex Head ScrewsStainless Steel


9.5mm diameter thread

Bugle Head ScrewsStainless Steel


cA

rPEn

tErS

MAt

E H

Ex H

EAD

SC

REW

S /

BUG

LE H

EAD

SC

REW

S 6

0 /

61

All prices show

n are plus VAT


CMSB10-50-200 200 £22.00

CMSB10-50-500 500 £48.00

CMSB10-50-2000 2000 £168.00


CMSB10-63-200 200 £26.00

CMSB10-63-500 500 £58.00

CMSB10-63-2000 2000 £204.00


CMSB10-75-150 150 £28.00

CMSB10-75-400 400 £68.00

CMSB10-75-1500 1500 £230.00


CMSB12-100-200 200 £48.00

CMSB12-100-500 500 £108.00

CMSB12-100-1000 1000 £198.00


CMSB12-125-200 200 £56.00

CMSB12-125-500 500 £128.00

CMSB12-125-1000 1000 £242.00


CMSB10-150-200 200 £82.00

CMSB10-150-500 500 £178.00

CMSB10-150-1000 1000 £338.00

A premium quality No.10 gauge stainless steel deck screw manufactured from 316 grade of stainless steel, incorporating the same great features as the Finishing Deck Screw but with a flat head incorporating the all positive No.2 square drive. This product leaves a great visible finish.No.2 square drive. 1 free drive tool with every pack.




CMSF7-40-200 200 £18.00

CMSF7-40-500 500 £40.00

CMSF7-40-2000 2000 £135.00


CMSF7-50-200 200 £20.00

CMSF7-50-500 500 £44.00

CMSF7-50-2000 2000 £150.00


CMSF7-63-200 200 £24.00

CMSF7-63-500 500 £50.00

CMSF7-63-2000 2000 £170.00


CMSF7-75-200 200 £28.00

CMSF7-75-500 500 £56.00

CMSF7-75-2000 2000 £184.00

Finishing ScrewStainless Steel

A premium quality No.7 gauge stainless steel deck screw manufactured from 316 grade of stainless steel which maximises the strength of this metal alloy.Incorporating the all positive No. 2 square drive, the head of the deck screw with a 6.0mm head diameter ensures as near invisible fastening as possible!

No. 2 Square Drive. 1 free drive tool with every pack.

All prices show

n are plus VAT


Composite Deck ScrewsStainless Steel


cA

rPEn

tErS

MAt

E FI

NIS

HIN

G S

CRE

W /

CO

MPO

SITE

DEC

K SC

REW

S 6

2 /

63

All prices show

n are plus VAT

A quality No.10 gauge stainless steel deck screw designed to fasten composite timber deck boards and components without producing the ‘Mushroom’ effect. This product also makes a great fastener for natural timbers such as Cedar.

No. 25 Torx Drive. 1 free drive tool with every pack.


CMCD10-63-200 200 £29.00

CMCD10-63-500 500 £58.00

CMCD10-63-2000 2000 £190.00


CMCD10-75-200 200 £34.00

CMCD10-75-500 500 £70.00

CMCD10-75-2000 2000 £220.00

For all Carpenters’ Mate products:

• 75 Fasteners covers approx. 20 Sq Feet*• 350 Fasteners covers approx.100 Sq Feet*• 1750 Fasteners covers approx. 500 Sq Feet*

*Approximate coverage based on two fasteners per board per joist. Joist centres calculated at 400mm



Our delivery vehicles serve a broad area on a regular basis.

When placing an order, our sales staff can advise you as to the earliest delivery date possible. This is usually: 2-4 days on selected orders 4-6 days on sawn and machined orders 5-10 days on fresh sawn/seasoned beam orders

It is our aim to deliver all orders over £500 (inc VAT) free of charge. For orders under this value, or if you are far from our regular delivery routes, charges may apply. Our sales staff will advise any charges at quotation / order stage.


Delivery


If you wish to collect from our yard we will be glad to prepare your order for you. Please place orders at least a day in advance, thus allowing us to keep to schedule and provide the best service we can.

Yard collections without prior arrangement command a 5% surcharge on all prices.

A303

A303

A303

A356

A356

A356

A30

A30

Location

64

/ 6

5d

ELIV

ErY

& L

oc

AtIo

n

Hewins TimberMill Lane, LopenSouth PethertonSomerset, TA13 5JS

Tel 01460 241777 Fax 01460 241341 Email [email protected]

Documents

Hewins Timber Winter Book