• Home

  • Documents

  • HEAVY DUTY - Produttore nastri autoadesivi made in ItalyHEAVY DUTY backing thickness µm total...
7
INFORMATIVE DATA SHEET It is good practice to use the product within 12 months from purchase date (6 months if jumbo roll). The rolls must be kept in their original packing. Keep the product out of the light and protect from direct heat sources. The tape must be kept in a dry place, at humidity level below 65%, preferably at a temperature between 15° C and 25° C. If the storage temperature is different, restore the tape back to above level before using it. The values in the informative data sheets are the average results of tests made on our standard production and are not legally binding. The aesthetic and technical features may be subject to some changes caused by ageing, even though the quality level of the product is maintained. Nar shall not be liable for direct damages or for any consequence arising from the misuse of the product. We suggest the verification of the product suitability to the specific condition of use. Additional indications are available in the last edition of the booklet “Recommendation regarding choice, storing and use of pressure sensitive tapes” published by Federazione Gomma Plastica. Updated on 02/2020 www.nar-spa.com/ technical-notes.html HEAVY DUTY backing thickness µm total thickness µm adhesion N/cm breaking load N/cm elongation at break % heavy weight packaging NARFIL 500 28 120 > 8 > 220 • NARGLASS 532 28 120 > 8 > 170 • NARGLASS 539 28 130 > 8 > 220 • NARSTRAP 520 AR / BI 50 72 > 2,4 > 160 > 27 • NARSTRAP 540 NE 75 98 > 2,4 > 240 > 27 •

HEAVY DUTY - Produttore nastri autoadesivi made in ItalyHEAVY DUTY backing thickness µm total thickness µm adhesion N/cm breaking load N/cm elongation at break % heavy weight packaging

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

  • INFORMATIVEDATA SHEET

    It is good practice to use the product within 12 months from purchase date (6 months if jumbo roll). The rolls must be kept in their original packing. Keep the product out of the light and protect from direct heat sources. The tape must be kept in a dry place, at humidity level below 65%, preferably at a temperature between 15° C and 25° C. If the storage temperature is different, restore the tape back to above level before using it.The values in the informative data sheets are the average results of tests made on our standard production and are not legally binding. The aesthetic and technical features may be subject to some changes caused by ageing, even though the quality level of the product is maintained. Nar shall not be liable for direct damages or for any consequence arising from the misuse of the product. We suggest the verification of the product suitability to the specific condition of use.Additional indications are available in the last edition of the booklet “Recommendation regarding choice, storing and use of pressure sensitive tapes” published by Federazione Gomma Plastica.

    Upd

    ated

    on

    02/2

    020

    www.nar-spa.com/technical-notes.html

    HEAVYDUTY

    backing thicknessµm

    total thicknessµm

    adhesionN/cm

    breaking loadN/cm

    elongation at break%

    heavy weight packaging

    NARFIL 500 28 120 > 8 > 220 •NARGLASS 532 28 120 > 8 > 170 •NARGLASS 539 28 130 > 8 > 220 •NARSTRAP 520 AR / BI 50 72 > 2,4 > 160 > 27 •NARSTRAP 540 NE 75 98 > 2,4 > 240 > 27 •

  • FRONTE

    MADE IN ITALY

    COMPOSITION

    AVAILABLE COLOURS

    SUITABLE FOR

    INFORMATIVEDATA SHEET

    HEAVY DUTY

    LEGNARO

    LEGNARO - SCHIO - BRUGINE

    LEGNARO - SCHIO - BRUGINE

    LEGNAROLEGNARO

    LEGNARO

    NAR S.P.A.Legnaro (PADOVA)ITALYwww.nar-spa.com

    NARSTRAP520 BI

    TOTAL THICKNESS72 µm

    BACKING THICKNESS50 µm

    BACKING: monoaxially oriented polypropyleneADHESIVE: natural rubber / hydrocarbonic resins / solvent CORE: recycled paper and paperboard

    White

    HEAVY WEIGHT PACKAGING

    BREAKING LOAD> 160 N/cm

    Heavy packaging; binding things; palletizing

    The natural rubber adhesive, together with the high performances of the monoaxially oriented support, make this product particularly suitable for palletizing and stocking heavy and bulky packages.

  • FRONTE

    MADE IN ITALY

    COMPOSITION

    AVAILABLE COLOURS

    SUITABLE FOR

    INFORMATIVEDATA SHEET

    LEGNARO

    LEGNARO - SCHIO - BRUGINE

    LEGNARO - SCHIO - BRUGINE

    LEGNAROLEGNARO

    LEGNARO

    NAR S.P.A.Legnaro (PADOVA)ITALYwww.nar-spa.com

    HEAVY DUTY

    NARSTRAP520 AR

    TOTAL THICKNESS72 µm

    BACKING THICKNESS50 µm

    BACKING: monoaxially oriented polypropyleneADHESIVE: natural rubber / hydrocarbonic resins / solvent CORE: recycled paper and paperboard

    Orange

    The natural rubber adhesive, together with the high performances of the monoaxially oriented support, make this product particularly suitable for palletizing and stocking heavy and bulky packages.

    BREAKING LOAD> 160 N/cm

    HEAVY WEIGHT PACKAGING

    Heavy packaging; binding things; palletizing

  • FRONTE

    MADE IN ITALY

    COMPOSITION

    AVAILABLE COLOURS

    SUITABLE FOR

    INFORMATIVEDATA SHEET

    LEGNARO

    LEGNARO - SCHIO - BRUGINE

    LEGNARO - SCHIO - BRUGINE

    LEGNAROLEGNARO

    LEGNARO

    NAR S.P.A.Legnaro (PADOVA)ITALYwww.nar-spa.com

    HEAVY DUTY

    NARSTRAP 540 NE

    BACKING THICKNESS75 µm

    TOTAL THICKNESS98 µm

    BREAKING LOAD> 240 N/cm

    BACKING: monoaxially oriented polypropyleneADHESIVE: natural rubber / hydrocarbonic resins / solvent CORE: recycled paper and paperboard

    Black

    HEAVY WEIGHT PACKAGING

    Heavy packaging; binding things; palletizing

    The natural rubber adhesive, together with the high performances of the monoaxially oriented support, make this product particularly suitable for palletizing and stocking heavy and bulky packages.

  • MADE IN ITALY

    COMPOSITION

    AVAILABLE COLOURS

    SUITABLE FORINFORMATIVEDATA SHEET

    LEGNARO

    LEGNARO - SCHIO - BRUGINE

    LEGNARO - SCHIO - BRUGINE

    LEGNAROLEGNARO

    LEGNARO

    NAR S.P.A.Legnaro (PADOVA)ITALYwww.nar-spa.com

    FRONTE

    HEAVY DUTY

    Heavy packaging; binding things; palletizing

    BACKING: biaxially oriented polypropylene film reinforced with longitudinal glass fibresADHESIVE: synthetic rubber / hydrocarbonic resinsCORE: recycled paper and paperboard

    Transparent

    The high performance hot melt adhesive and the glass fiber reinforced backing make this product the ideal choice for all packaging needs, also the heaviest.

    NARFIL500

    ORGANIC SOLVENTS FREE

    ADHESION> 8 N/cm

    BREAKING LOAD> 220 N/cm

    HEAVY WEIGHT PACKAGING

  • MADE IN ITALY

    COMPOSITION

    AVAILABLE COLOURS

    SUITABLE FORINFORMATIVEDATA SHEET

    LEGNARO

    LEGNARO - SCHIO - BRUGINE

    LEGNARO - SCHIO - BRUGINE

    LEGNAROLEGNARO

    LEGNARO

    NAR S.P.A.Legnaro (PADOVA)ITALYwww.nar-spa.com

    FRONTE

    HEAVY DUTY

    Heavy packaging; binding things; palletizing

    BACKING: biaxially oriented polypropylene film reinforced with cross weaved glass fibresADHESIVE: synthetic rubber / hydrocarbonic resinsCORE: recycled paper and paperboard

    Transparent

    The high performance hot melt adhesive and the glass fiber reinforced backing makes this product the ideal choice for all packaging needs, also the heaviest.

    NARGLASS532

    BREAKING LOAD> 170 N/cm

    TOTAL THICKNESS120 µm

    ORGANIC SOLVENTS FREE

    HEAVY WEIGHT PACKAGING

  • MADE IN ITALY

    COMPOSITION

    AVAILABLE COLOURS

    SUITABLE FORINFORMATIVEDATA SHEET

    LEGNARO

    LEGNARO - SCHIO - BRUGINE

    LEGNARO - SCHIO - BRUGINE

    LEGNAROLEGNARO

    LEGNARO

    NAR S.P.A.Legnaro (PADOVA)ITALYwww.nar-spa.com

    FRONTE

    HEAVY DUTY

    BACKING: biaxially oriented polypropylene film reinforced with cross weaved glass fibresADHESIVE: synthetic rubber / hydrocarbonic resinsCORE: recycled paper and paperboard

    Transparent

    The high performance hot melt adhesive and the glass fiber reinforced backing make this product the ideal choice for all packaging needs, also the heaviest.

    NARGLASS539

    HEAVY WEIGHT PACKAGING

    Heavy packaging; binding things; palletizing

    ORGANIC SOLVENTS FREE

    BREAKING LOAD> 220 N/cm

    TOTAL THICKNESS130 µm


Special Purpose Transformers - · PDF fileSpecial Purpose Transformers ... • Total Power 400 MW • 111 pcs. ... • Zincflake coating system with 210 µm layer thickness

Special Purpose Transformers - · PDF fileSpecial Purpose Transformers ... • Total Power 400 MW • 111 pcs. ... • Zincflake coating system with 210 µm layer thickness

Documents
truXTRAC® FFPE total NA Kit · This protocol is optimized for FFPE slide sections up to 20 µm in total material thickness (from a 10mm2 area), scrolls/curls up to 20 µm in total

truXTRAC® FFPE total NA Kit · This protocol is optimized for FFPE slide sections up to 20 µm in total material thickness (from a 10mm2 area), scrolls/curls up to 20 µm in total

Documents
I. N. Orbulov 1, a Á. Németh 1, b , J. Dobránszky 2, c 130-170 µm diameter range with a mean diam eter of 150 µm. Wall thickness is about 15 µm (~10% of the average diameter)

I. N. Orbulov 1, a Á. Németh 1, b , J. Dobránszky 2, c 130-170 µm diameter range with a mean diam eter of 150 µm. Wall thickness is about 15 µm (~10% of the average diameter)

Documents
Plus Heavy Duty Pavers Elegant and Dynamic …concretepavers.com.sg/ecat/primeflexipave.pdfPlus Heavy Duty Pavers Elegant and Dynamic THICKNESS 80mrn 300mm WEIGHT 7.8kg COVERAGE 22.2

Plus Heavy Duty Pavers Elegant and Dynamic …concretepavers.com.sg/ecat/primeflexipave.pdfPlus Heavy Duty Pavers Elegant and Dynamic THICKNESS 80mrn 300mm WEIGHT 7.8kg COVERAGE 22.2

Documents
Dr. Christian E. BUTZKE Enology Professor PURDUE UNIVERSITY · 10 µm10 µm 1 µm1 µm 100 nm100 nm 10 nm10 nm.45 µm.45 µm .2 µm.2 µm Particle Size

Dr. Christian E. BUTZKE Enology Professor PURDUE UNIVERSITY · 10 µm10 µm 1 µm1 µm 100 nm100 nm 10 nm10 nm.45 µm.45 µm .2 µm.2 µm Particle Size

Documents
GDD - Production guide v41 · 2020. 6. 4. · Shielding Aluminium (10 µm) GDD GEM foils (50 µm) 50 µm thick kapton, 5 µm copper, 70 µm hole diam., 140 µm pitch EST Drift 2 µm

GDD - Production guide v41 · 2020. 6. 4. · Shielding Aluminium (10 µm) GDD GEM foils (50 µm) 50 µm thick kapton, 5 µm copper, 70 µm hole diam., 140 µm pitch EST Drift 2 µm

Documents
myAVR Technische Beschreibung technical descriptionsisy.name/mymcu_download/produkte/mymultiprog-mk3/...PCB material FR8, thickness 1.5 mm, Cu layer 0.35 µm, two-sided, soldering

myAVR Technische Beschreibung technical descriptionsisy.name/mymcu_download/produkte/mymultiprog-mk3/...PCB material FR8, thickness 1.5 mm, Cu layer 0.35 µm, two-sided, soldering

Documents
ARZONA TM 125C - Agfa-Gevaert Arzona_125C 201305… · Thickness µm 125 ASTM 374-D Tolerance % 4 Weight g/m² 175 Internal Agfa method ... %

ARZONA TM 125C - Agfa-Gevaert Arzona_125C 201305… · Thickness µm 125 ASTM 374-D Tolerance % 4 Weight g/m² 175 Internal Agfa method ... %

Documents
Workshop LLE 240616 Bourgade - Rochester, NY · w/ thinner thickness obtained by square wells : 20 µm x 20 µm Depth 3050 Å

Workshop LLE 240616 Bourgade - Rochester, NY · w/ thinner thickness obtained by square wells : 20 µm x 20 µm Depth 3050 Å

Documents
volume ~ 1 µm x 1 µm x 1 µm

volume ~ 1 µm x 1 µm x 1 µm

Documents
C190-E206A Shim-pack HPLC Column Guidebook4 5 1.6 µm, 2.2 µm 1.9 µm, 2 µm, 2.2 µm, 3 µm ≥ 3 µm 5 µm, 10 µm 15 µm Analytical Columns High-Speed Analysis Conventional Analysis

C190-E206A Shim-pack HPLC Column Guidebook4 5 1.6 µm, 2.2 µm 1.9 µm, 2 µm, 2.2 µm, 3 µm ≥ 3 µm 5 µm, 10 µm 15 µm Analytical Columns High-Speed Analysis Conventional Analysis

Documents
Bi-Function Multi-Beam Graphene Lens Antenna for Terahertz ...of a square perforated dielectric box, with arm length L 1 = 28 µm, thickness h = 12.5 µm, and dielectric constant ε

Bi-Function Multi-Beam Graphene Lens Antenna for Terahertz ...of a square perforated dielectric box, with arm length L 1 = 28 µm, thickness h = 12.5 µm, and dielectric constant ε

Documents
NSR-2205i14E - tarasemi.com · EGA 8 point sampling 12 Array Orthogonality Within ± 0.1 sec ... Resist thickness: 1.20 µm thickness . 4 4 NSR-2205i14E ACCEPTANCE TEST METHODS AND

NSR-2205i14E - tarasemi.com · EGA 8 point sampling 12 Array Orthogonality Within ± 0.1 sec ... Resist thickness: 1.20 µm thickness . 4 4 NSR-2205i14E ACCEPTANCE TEST METHODS AND

Documents
Epidermal thickness (µm)

Epidermal thickness (µm)

Documents
Merkel Omegat OMK-E - seal-directSliding surface 0,05 … 0,3 µm ≤2,5 µm Groove base ≤1,6 µm ≤6,3 µm Groove flanks ≤3,0 µm ≤15,0 µm Percentage contact area M r >50%

Merkel Omegat OMK-E - seal-directSliding surface 0,05 … 0,3 µm ≤2,5 µm Groove base ≤1,6 µm ≤6,3 µm Groove flanks ≤3,0 µm ≤15,0 µm Percentage contact area M r >50%

Documents
Cygnus Thickness Gauges96929ed84624caad638d-075ff049122dab2b76882ee511eeee1e.r94... · 2016-04-21 · Cygnus Heavy Duty MULTIPLE ECHO ULTRASONIC DIGITAL THICKNESS GAUGE Measures metal

Cygnus Thickness Gauges96929ed84624caad638d-075ff049122dab2b76882ee511eeee1e.r94... · 2016-04-21 · Cygnus Heavy Duty MULTIPLE ECHO ULTRASONIC DIGITAL THICKNESS GAUGE Measures metal

Documents
HEAVY DUTY DUCT FIBRE OPTIC CABLE - cbitele.com · HEAVY DUTY DUCT FIBRE OPTIC CABLE Cladding Diameter (µm) 125 ± 0.7 125 ± 0.7 Cladding Non Circulatory (%) ≤ 0.7 1 Core-Clad

HEAVY DUTY DUCT FIBRE OPTIC CABLE - cbitele.com · HEAVY DUTY DUCT FIBRE OPTIC CABLE Cladding Diameter (µm) 125 ± 0.7 125 ± 0.7 Cladding Non Circulatory (%) ≤ 0.7 1 Core-Clad

Documents
Reduzierung des Bremsrubbelns bei Kraftfahrzeugen durch ... · DTV Disk Thickness Variation = Dickenschwankung in [µm] ... Bremsrubbeln (engl. brake judder) stellt eine bremsinduzierte,

Reduzierung des Bremsrubbelns bei Kraftfahrzeugen durch ... · DTV Disk Thickness Variation = Dickenschwankung in [µm] ... Bremsrubbeln (engl. brake judder) stellt eine bremsinduzierte,

Documents
Reconstructing the Human Renal Vascular–Tubular Unit In Vitro · of 3.1 µm (n = 7, SEM = 0.8µm), and a minimum thickness of 0.5 µm after 14 d of culture (p< 0.0001) (Figure 2i)

Reconstructing the Human Renal Vascular–Tubular Unit In Vitro · of 3.1 µm (n = 7, SEM = 0.8µm), and a minimum thickness of 0.5 µm after 14 d of culture (p< 0.0001) (Figure 2i)

Documents
Surface Metal Plating - frontier materialsfrontiermaterials.net/teaching/surface_finish_new_2011.pdf · Typical GF Thickness: 0.8 – 1.5 µm (30 - 60 µ in) Hard Gold over 2.5 –

Surface Metal Plating - frontier materialsfrontiermaterials.net/teaching/surface_finish_new_2011.pdf · Typical GF Thickness: 0.8 – 1.5 µm (30 - 60 µ in) Hard Gold over 2.5 –

Documents
ISO 16890 Get the full picture on filter performance....1 µm and PM10 2 µm 3 µm 4 µm 5 µm 6 µm 7 µm 8 µm 9 µm 10 µm 0 µm 1 µm So you get the full picture of how a filter

ISO 16890 Get the full picture on filter performance....1 µm and PM10 2 µm 3 µm 4 µm 5 µm 6 µm 7 µm 8 µm 9 µm 10 µm 0 µm 1 µm So you get the full picture of how a filter

Documents
Transistor and Circuit Design for 100-200 GHz ICs...Contact resistance 150 Ω-µm2 20 Ω-µm2 20 Ω-µm2 Collector Width 3 µm 1.6 µm 0.7 µm Collector Thickness 3000 Å 2000 Å 1000

Transistor and Circuit Design for 100-200 GHz ICs...Contact resistance 150 Ω-µm2 20 Ω-µm2 20 Ω-µm2 Collector Width 3 µm 1.6 µm 0.7 µm Collector Thickness 3000 Å 2000 Å 1000

Documents
Catalogue - Rauschert · 2020. 1. 30. · 100 µm Working Discs Guide Discs part-number diameter bore thickness radius roughness Rauschert CICE D [mm] d [mm] B [mm] R [mm] Ra [µm]

Catalogue - Rauschert · 2020. 1. 30. · 100 µm Working Discs Guide Discs part-number diameter bore thickness radius roughness Rauschert CICE D [mm] d [mm] B [mm] R [mm] Ra [µm]

Documents
ars.els-cdn.com  · Web view(3) Completely gelled hydrogel disc with a 20 mm diameter and a thickness of 1000 µm was placed between 20 mm parallel plates with a gap of 1000 µm

ars.els-cdn.com  · Web view(3) Completely gelled hydrogel disc with a 20 mm diameter and a thickness of 1000 µm was placed between 20 mm parallel plates with a gap of 1000 µm

Documents
Effects of Particle Size and Shell Thickness on Fused-Core ... · The 5 µm HALO fused-core particle has more than double the number of plates/pressure of the 5 µm totally porous

Effects of Particle Size and Shell Thickness on Fused-Core ... · The 5 µm HALO fused-core particle has more than double the number of plates/pressure of the 5 µm totally porous

Documents
EOS Titanium Ti64 Grade 23 Material Data Sheet...Nozzle EOS grid nozzle Inert gas Argon Sieve 90 µm Additional information Layer thickness 40 µm Volume rate 6.2 mm³/s Min. wall

EOS Titanium Ti64 Grade 23 Material Data Sheet...Nozzle EOS grid nozzle Inert gas Argon Sieve 90 µm Additional information Layer thickness 40 µm Volume rate 6.2 mm³/s Min. wall

Documents
NSLS-II CSX Beamline Docs Documentation · •Back illuminated •250 µm - 350 µm thickness •Full well : ~900k e-per pixel •Sensitivity : 6 e-/ ADU for 8x gain (max gain) •Pixel

NSLS-II CSX Beamline Docs Documentation · •Back illuminated •250 µm - 350 µm thickness •Full well : ~900k e-per pixel •Sensitivity : 6 e-/ ADU for 8x gain (max gain) •Pixel

Documents
ADMATEC EUROPE BV - "The rapidly growing 3D printing ... · PDF fileADMATEC EUROPE BV 2-Feb-15 9 ›› Admaflex Technology Standard resolution µm 40 Layer thickness µm 30 100

ADMATEC EUROPE BV - "The rapidly growing 3D printing ... · PDF fileADMATEC EUROPE BV 2-Feb-15 9 ›› Admaflex Technology Standard resolution µm 40 Layer thickness µm 30 100

Documents
Evolution of damage in MoS -based dry film lubricants …eprints.nottingham.ac.uk/39854/1/DFL lifetime paper afteREv.pdf · thickness was increased from 6 µm to 15 µm (across a

Evolution of damage in MoS -based dry film lubricants …eprints.nottingham.ac.uk/39854/1/DFL lifetime paper afteREv.pdf · thickness was increased from 6 µm to 15 µm (across a

Documents
Nanophotonics - AMOLF€¦ · About length scales 4 1 m you and your labtable 100 µm thickness of a hair 10 µm smallest you can see 1 µm size of a cell 300 nm smallest you can

Nanophotonics - AMOLF€¦ · About length scales 4 1 m you and your labtable 100 µm thickness of a hair 10 µm smallest you can see 1 µm size of a cell 300 nm smallest you can

Documents