Upload
duongtram
View
219
Download
0
Embed Size (px)
Citation preview
Greatest possible transparency.
Hardware system for all-glass sliding doors withconcealed suspension, weighing up to 80 kg(176 lbs.).
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
14 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41 44 767 91 91 Fax +41 44 767 91 78
Purolino-PLUS 80
D e s c r i p t i o nHAWA-Purolino-PLUS 80: the sophisticated hardware system forall-glass sliding doors with concealed suspension for mounting to thewall or ceiling or integrating in the ceiling offers not only outstandingsliding convenience but also exemplary ease of installation. There aremany reasons that make sliding solutions based on the HAWA-Purolino-PLUS 80 a pure pleasure. The high-quality ball-bearingtechnology incorporated in each trolley, for instance, allows you tomove doors weighing up to 80 kg quietly and effortlessly on anodizedtop tracks. During installation, you will benefit from advantages suchas the two-part, point-fixing and rattle-proof floor-mounted guide,the simple clip-on cover and screen profiles and the new suspensionwedges. The word «PLUS» stands for the optionally available softclosing mechanism SoftMove 80 for the HAWA-Purolino-PLUS 80, aswell as for the fixed glass profile that guarantees a convenient optionfor room partitioning solutions when bolted to the top track.There are also optional additional profiles for vertical wall connectionsand for locking the installation with the HAWA-Toplock for all-glasssliding doors.
A p p l i c a t i o n sIdeal for situations incorporating glass as room partitioning anddesign elements, for instance in hotels, restaurants, retirementresidences, conference rooms, administration buildings and privateresidences.
F e a t u r e s o f t h e H AW A - P u r o l i n o - P L U S 8 0• Maximum door weight 80 kg (176 lbs.)• Minimum door width
without soft closing mechanism SoftMove 80: 600 mm (1'11 58")
with SoftMove 80, one-sided damping left or right: 850 mm (2'9 1532")
with SoftMove 80, two-sided damping: 850 mm (2'9 1532")
• Trolleys with high-quality ball bearing technology• Glass suspension technology completly integrated in the top track• Fast installation and height adjustment thanks to suspension wedges• Glass doors with a form-fitting connection to the hardware• Surfaces of top tracks, fixed glass profiles and cover profiles avail-
able in plain anodized or stainless steel effect• Removable cover and screen profiles• Fixed glass profile attachable to the top track• High-quality metal cover caps for the face side of top tracks
without fixed glass elements• Combinable with a vertical wall profile and a HAWA-Toplock• Glass thickness sliding door
fully tempered monolithic glass 8/10/12/12,7 mm ( 516"/
1332"/
1532"/
12")
fully tempered laminated glass 8–12,7 mm ( 516"–
12")
• Glass thickness fixed glassfully tempered monolithic glass and fully tempered laminated glass8–12 mm ( 5
16"–1532") [with silicone up to 13 mm (17
32")]
E x a m p l e o f a p p l i c a t i o n
Wall mounting withoutfixed glass,Two-part, rattle-prooffloor guide
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41 44 767 91 91 Fax +41 44 767 91 78 15
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
Purolino-PLUS 80
F u r t h e r a p p l i c a t i o n e x a m p l e sThe HAWA-Purolino-PLUS 80 is ideal for mounting to the wall and ceiling and also for recessed ceiling applications. The two ceiling-mountingvariants can be designed with or without fixed glass elements. The relevant components such as trolley, track stop and SoftMove 80 can befitted and removed from underneath on every design option.HAWA-Purolino-PLUS 80 makes an aesthetically appealing impression all round thanks to the cover and screen profiles that simply clip on wheninstallation is complete.
Integrated ceiling mountingwithout fixed glass
Integrated ceiling mountingwith profile for fixed glass
Ceiling mountingwithout fixed glass
Two-part, rattle-prooffloor guide
Recess mounted bottom/wallprofile to fixed glass,two-part, rattle-proof floor guide
Surface mounted bottom/wallprofile to fixed glass,two-part, rattle-proof floor guide
Ceiling mounting withprofile for fixed glass
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
16 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41 44 767 91 91 Fax +41 44 767 91 78
Purolino-PLUS 80
HAWA-Purolino-PLUS 80, set without top tracks
code
HAWA-Purolino-PLUS 80, set for 1 glass sliding door 24165
For two-panel sliding doors please order two sets for single doors.
Set comprising
code
Two-wheeled trolley left, with plastic-tyredball bearing wheels 23941
Two-wheeled trolley right, with plastic-tyredball bearing wheels 23942
Suspension wedges for glass mountig, left 23939
Suspension wedges for glass mountig, right 23940
Track stop, adjustable retaining force, left 23874
Track stop, adjustable retaining force, right 23875
Glass fixing parts
glass thicknessmm/inch code
Glass fixing parts for1 sliding door, fully tem-pered monolithic glass
8 ( 516") 22126
10 (1332") 22127
12 (12,7) [1532"(
12")] 22128
Glass fixing parts for1 sliding door, fully tem-pered laminated glass,incl. single use drilling jig
2 x 4 (2 x 532") 22129
2 x 5 (2 x 732") 22130
2 x 6 (2 x 14") 22131
S u s p e n s i o n w e d g e s f o r g l a s s s l i d i n g d o o r sThe suspension wedges set new standards with regard to ease andspeed when installing and adjusting the height of glass sliding doors.Firstly, because the wedges simply slide into the trolleys; secondly,because the soft closing mechanism SoftMove 80 for the HAWA-Purolino-PLUS 80 attaches to the left-hand suspension wedge withno need for additional components.
Soft closing mechanism SoftMove 80 for HAWA-Purolino-PLUS 80
code
Soft closing mechanism SoftMove 80for HAWA-Purolino-PLUS 80,complete,two-sided damping
24162
Soft closing mechanism SoftMove 80for HAWA-Purolino-PLUS 80,complete,one-sided damping left
24163
Soft closing mechanism SoftMove 80for HAWA-Purolino-PLUS 80,complete,one-sided damping right
24164
S o f t c l o s i n g m e c h a n i s m S o f t M o v e 8 0 f o r
H AW A - P u r o l i n o - P L U S 8 0The soft closing mechanism SoftMove 80 gently decelerates andcloses sliding doors equipped with HAWA-Purolino-PLUS 80 and canbe installed for the opening or closing side. Integrated completely inthe top track, the soft closing mechanism SoftMove 80 gently decel-erates the sliding doors and pulls them into the end position.The soft closing mechanism SoftMove 80 for HAWA-Purolino-PLUS80 is available in three options: two-sided, one-sided left andone-sided right.
L e f t o r r i g h t : a d e f i n i t i o nAn installation must be viewed from the side of the cover profile todetermine left and right hand side.
left right
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41 44 767 91 91 Fax +41 44 767 91 78 17
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
Purolino-PLUS 80
Top track set, wall mounting without fixed glass
Caution: - Hole positions vary- Minor differences in colour are possible
mminch code
Top track set for wall mounting,predrilled, incl. angled cover profile,alu, plain anodized,screen profile, rubber black
2500(8'2 7
16")24151
Top track set for wall mounting,predrilled, incl. angled cover profile,alu, stainless-steel effect, brushed,screen profile, rubber black
2500(8'2 7
16")24152
Top track set, ceiling mounting without fixed glass
Caution: - Hole positions vary- Minor differences in colour are possible
mminch code
Top track set for ceiling mountingwithout fixed glass, predrilled, incl.angled cover profile, alu, plainanodized,screen profile, rubber black
2500(8'2 7
16")24153
Top track set for ceiling mountingwithout fixed glass, predrilled, incl.angled cover profile, alu, stain-less-steel effect, brushed,screen profile, rubber black
2500(8'2 7
16")24154
Top track set, ceiling mounting (for fixed glass)
Caution: - Hole positions vary- Minor differences in colour are possible
mminch code
Top track set, predrilled für ceilingmounting and fixed glass profile,incl. angled cover profile, alu plainanodized,screen profile, rubber black
2500(8'2 7
16")24157
Top track set, predrilled für ceilingmounting and fixed glass profile,incl. angled cover profile, alustainless-steel effect, brushed,screen profile, rubber black
2500(8'2 7
16")24158
Top track set, integrated ceiling mounting (without/for fixed glass)
Caution: - Hole positions vary- Minor differences in colour are possible
mminch code
Top track set, predrilled for inte-grated ceiling mounting and fixedglass profile,incl. lower cover profile,alu plain anodized,screen profile, rubber black
2500(8'2 7
16")24155
Top track set, predrilled for inte-grated ceiling mounting and fixedglass profile,incl. lower cover profile,alu stainless-steel effect, brushed,screen profile, rubber black
2500(8'2 7
16")24156
W a l l o r c e i l i n g m o u n t i n g w i t h o u t f i x e d g l a s sThe top track is pre-drilled for wall or ceiling mounting; the angledcover profile is clipped on after installation.
C e i l i n g m o u n t i n g w i t h f i x e d g l a s sThe top track in the top track set for ceiling mounting has drill holeson two sides. Those on the top are for mounting to the ceiling andthose on the side are for attaching the fixed glass profile (to beordered separately).The angled cover profile is clipped to the top track and fixed glassprofile once they are attached to the ceiling.
I n t e g r a t e d c e i l i n g m o u n t i n g w i t h / w i t h o u t f i x e d g l a s sThis top track set (top track drilled on two sides) is used for recessedceiling installations with and without fixed glass elements. The profilefor fixed glass elements (to be ordered separately) is attached to thetop track with special countersunk screws.The clip-on cover profile is attached to the top track (with or withouta fixed glass profile) from below after it is fitted in the ceiling.
Ceiling mounting:Top track without fixed glass,dressing with angled cover profile
Ceiling mounting:Top track with fixed glass anddressing with angled cover profile
Integrated ceiling mounting:Top track with fixed glass anddressing with lover cover profile
Wall mounting:Top track without fixed glass,dressing with angled cover profile
Floor-mounted guides/Bottom door stop
Caution: Minor differences in colour are possible code
Rattle-proof floorguide 2-part, incl.self-adhesive slidersfor satinised glass,glass thickness8–13 mm ( 5
16"–1732")
dull chromium finish 21029
stainless steel effect 20858
Bottom door stop withcentering assembly
dull chromium finish 20773
stainless steel effect 21473
F l o o r g u i d e / B o t t o m d o o r s t o pThe sliding doors have a two-part, rattle-proof floor guide. The bottomdoor stop and track stop simultaneously bring the sliding doors to ahalt, quietly and with no strain on the hardware.
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
18 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41 44 767 91 91 Fax +41 44 767 91 78
Purolino-PLUS 80
Top track, wall mounting without fixed glass
Caution: - Hole positions vary- Minor differences in colour are possible mm/inch code
Top track for wall mounting,alu plain anodized, predrilled
2500 (8'2 716") 23841
6000 (19'8 732") 23833
cut to size 23834
Top track for wall mounting,alu stainless-steel effect,brushed, predrilled
2500 (8'2 716") 23842
6000 (19'8 732") 23835
cut to size 23836
Top track, ceiling mounting without fixed glass
Caution: - Hole positions vary- Minor differences in colour are possible mm/inch code
Top track for ceilingmounting, alu plainanodized, predrilled
2500 (8'2 716") 23843
6000 (19'8 732") 23837
cut to size 23838
Top track for ceilingmounting, alu stainless-steeleffect, brushed, predrilled
2500 (8'2 716") 23844
6000 (19'8 732") 23839
cut to size 23840
Top track, ceiling mounting (without/for fixed glass)
Caution: - Hole positions vary- Minor differences in colour are possible mm/inch code
Top track, predrilled forceiling and integrated ceilingmounting as well as fixedglass profile, alu plainanodized
2500 (8'2 716") 24120
6000 (19'8 732") 24118
cut to size 24122
Top track, predrilled forceiling and integrated ceilingmounting as well as fixedglass profile, alu stainless-steel effect, brushed
2500 (8'2 716") 24121
6000 (19'8 732") 24119
cut to size 24123
Cover and screen cover profile for top track
Caution: - Hole positions vary- Minor differences in colour are possible mm/inch code
Angled cover profile for toptrack, alu plain anodized
2500 (8'2 716") 23810
6000 (19'8 732") 23811
cut to size 23816
Angled cover profile for toptrack, alu stainless-steeleffect, brushed
2500 (8'2 716") 23817
6000 (19'8 732") 23818
cut to size 23819
Lower cover profile for toptrack, alu plain anodized
2500 (8'2 716") 23899
6000 (19'8 732") 23898
cut to size 23900
Lower cover profile for toptrack, alu stainless-steeleffect, brushed
2500 (8'2 716") 23902
6000 (19'8 732") 23901
cut to size 23903
Screen cover profile, rubberblack, for cover profile andtop track
2,5 m (8'2 716") 23909
10 m (32'9 2332") 23910
50 m (164'0 12") 23911
To p t r a c k s , c o v e r - a n d s c r e e n c o v e r p r o f i l e sThe top tracks, cover profile and screen profile are available not onlyas a set but also individually in lengths of 2500 mm, 6000 mm andcut to size. Top tracks and cover profiles are available in plain anod-ized aluminium or a brushed stainless steel effect; the screen profilesare made of black rubber.
Lower cover profile with screen cover profile
Top track with screen cover profile
Angled cover profile with screen cover profile
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41 44 767 91 91 Fax +41 44 767 91 78 19
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
Purolino-PLUS 80
Profile set for fixed glass
Caution: Minor differences in colour are possible mminch code
Profile set for fixed glass, incl. coverprofile, alu plain anodized,set incl. special countersunkscrews, 5,5 x 19 mm ( 7
32" x34")
2500(8'2 7
16")24159
Profile set for fixed glass, incl. coverprofile, alu stainless-steel effect,brushed, set incl. special counter-sunk screws, 5,5 x 19 mm ( 7
32" x34")
2500(8'2 7
16")24160
Profile for fixed glass
Caution: Minor differences in colour are possible mm/inch code
Profile for fixed glass,alu plain anodized
2500 (8'2 716") 23768
6000 (19'8 732") 23770
cut to size 23772
Profile for fixed glass,alu stainless-steel effect,brushed
2500 (8'2 716") 23769
6000 (19'8 732") 23771
cut to size 23773
Cover profile to profile fixedglass, alu plain anodized
2500 (8'2 716") 20865
6000 (19'8 732") 21229
cut to size 19548
Cover profile to profile fixedglass, alu stainless-steeleffect, brushed
2500 (8'2 716") 21315
6000 (19'8 732") 21283
cut to size 21284
Special countersunk screws, 5,5 x 19 mm( 7
32" x34") for fixing profile fixed glass to top
track, set of 5 pieces, for top track length upto 2500 (8'2 7
16") mm
24138
P r o f i l e f o r f i x e d g l a sThe HAWA-Purolino-PLUS 80 is a versatile room partitioning systemthanks to the combination of top track and fixed glass profile. Theprofile for fixed glass elements is attached to the top track with spe-cial countersunk screws.The Hawa rubber profile or a silicone joint keeps the glass element inplace without a cutout or hardware elements and prevent moisturefrom penetrating between glass and profile.The clip-on cover profile is designed for the doorway area.
The profile for fixed glass elements is attachedto the top track with special countersunkscrews and covered from below with thecover profile.
B o t t o m / w a l l p r o f i l e f o r f i x e d g l a s sThe retention profile provides stability for the fixed glass element,whether surface mounted or sunk into the floor. If the load is low, anaesthetically pleasing glass holder of only 50 mm length can beused instead of the continuous floor or wall profile.
Bottom, wall and rubber profile to fixed glass
Caution: - Hole positions vary- Minor differences in colour are possible mm/inch code
Bottom/wallprofile to fixedglass, alu,predrilled
plainanodized
4000 (13'1 12") 19549
6000 (19'8 732") 19561
cut to size 20067stainlesssteeleffect,brushed
4000 (13'1 12") 21285
6000 (19'8 732") 21286
cut to size 21287Rubber profile, black to fixedglass 8–9.9 mm ( 5
16"–1332") roll of 10 m
(32'9 2332")
23135
Rubber profile, black to fixedglass 10–12mm (13
32"–1532”) 19846
Bottom/wall glass retainer piece, 50 mm(1 31
32"), alu plain anodized, predrilled, withrubber profile for 8–9,9 mm ( 5
16"–1332") glass
23137
Bottom/wall glass retainer piece, 50 mm(1 31
32"), alu plain anodized, predrilled, withrubber profile for 10–12 mm (13
32"–1532”) glass
20274
Bottom/wall glass retainer piece, 50 mm (1 3132"),
alu stainless steel effect, brushed, predrilled,with rubber profile for 8–9,9 mm ( 5
16"–1332") glass
23138
Bottom/wall glass retainer piece, 50 mm (1 3132"),
alu stainless steel effect, brushed, predrilled,with rubber profile for 10–12 mm (13
32"–1532”) glass
21288
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
20 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41 44 767 91 91 Fax +41 44 767 91 78
Purolino-PLUS 80
Wall profile set for wallsurface mountingincluding seal profile
End profile for wallsurface mountingincluding rubber seal
W a l l s u r f a c e m o u n t i n gThe vertical additional profiles with rubber seals minimise the verticalgaps between the building wall and the sliding glass door. The strikeplate of the HAWA-Toplock for glass sliding doors (→ page 28)can be integrated in the wall profile set with the black seal profile16452/16453 for lockable sliding doors that run in front of a wall.
W a l l c o n n e c t i o n p r o f i l eThe ideal wall connection profile for glass sliding doors withunprotected glass edges.
End profile set wall surface assembly
Caution: Minor differences in colour are possible mm/inch code
End profile set wall surfaceassembly, complete,alu plain anodized
2500 (8'2 716") 22148
3500 (11'5 1316") 22150
End profile set wall surfaceassembly, complete,alu, stainless steel effect,brushed
2500 (8'2 716") 22149
3500 (11'5 1316") 22151
Rubber seal for end profilewall surface mounting
2500 (8'2 716") 22040
3500 (11'5 1316") 22041
Scope of delivery for end profile for wall surface mounting:
• End profile • Vertical aluminium profile• Flat profile 20/4 mm • Vertical plastic profile• Adhesive tape • Cleaning cloth
Wall profile set for wall surface mounting
Caution: - Hole positions vary- Minor differences in colour are possible mm/inch code
Wall profile set for wallsurface mounting, alu plainanodized, predrilled, incl.retainer profile,alu plain anodized
2500 (8'2 716") 22144
3500 (11'5 1316") 22146
Wall profile set for wall sur-face mounting, alu stainlesssteel effect, brushed,predrilled, incl. retainer pro-file alu stainless steel effect
2500 (8'2 716") 22145
3500 (11'5 1316") 22147
Seal profile, black,for wall profile
roll2500 (8'2 7
16")16452
roll3500 (11'5 13
16")16453
Wall connection profile
Caution: Minor differences in colour are possible mm/inch code
Wall profile,alu, undrilled
plainanodized
2500 (8'2 716") 17020
3500 (11'5 1316") 17021
stainlesssteel effect,brushed
2500 (8'2 716") 20119
3500 (11'5 1316") 20120
Seal profile, black,for wall profile
roll2500 (8'2 7
16")16452
roll3500 (11'5 13
16")16453
Centering assembly blackfor all glass sliding doors,to wall profile
18663
Centering assembly greyfor all glass sliding doors 18619
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41 44 767 91 91 Fax +41 44 767 91 78 21
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
Purolino-PLUS 80
Rubber profile for glass edge protection
roll of code
Rubber profile self-adhesive,for 8/10 mm ( 5
16"/1332") glass
thickness, black,glass distance 4 mm ( 5
32")
5 m (16'4 2732") 19442
10 m (32'9 2332") 19443
50 m (164' 12") 19444
Rubber profile self-adhesive,for 8/10 mm ( 5
16"/1332") glass
thickness, translucent,glass distance 4 mm ( 5
32")
5 m (16'4 2732") 19445
10 m (32'9 2332") 19446
50 m (164' 12") 19447
R u b b e r p r o f i l e f o r g l a s s e d g e p r o t e c t i o nSelf-adhesive rubber profile fitted along the glass edge minimisesdraughts and buffers impacts between adjacent glass sliding doors.Using the soft closing mechanism SoftMove 80 the doors are gentlydecelerated and pulled to the end position.
Side cover cap for top track without fixed glass
code
Side cover cap, incl.grub screw, metal,suitable for both sides,1 piece
dull chromium finish 24145
stainless steel effect 24080
B e t t e r s a f e t h a n s o r r yThe HAWA-Toplock for all glass sliding doors is the ideal solutionas it is aesthetically appealing and very secure.Details see HAWA-Toplock, → page 28.
HAWA-Toplock with wall profile andseal profile, black 16452/16453.
HAWA-Toplock withcountercasing
S i d e c o v e r c a p f o r t o p t r a c kThe metal (Zamak) cover cap is available in a matt chromium finishor stainless steel effect for top tracks without a fixed glass profile.It is available individually and can be fitted left or right as required.
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
22 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41 44 767 91 91 Fax +41 44 767 91 78
Purolino-PLUS 80
O r d e r s p e c i f i c a t i o n s• Quantity of sets• Type and quantity of glass fixing parts• Type and quantity of top track sets• Type and quantity of cover profiles and screen profiles
O p t i o n a l o r d e r s p e c i f i c a t i o n s• Type and quantity of side cover caps• Type and quantity of soft closing mechanism SoftMove 80• Type and quantity of end profile set for wall surface mounting• Type and quantity of wall profile set for wall surface mounting• Type and quantity of wall joint profiles• Type and quantity of floor-mounted guides and bottom door stop• Type and length of rubber profile for glass edge protection
O p t i o n a l o r d e r s p e c i f i c a t i o n s f i x e d g l a s s• Type and quantity of profile set for fixed glass• Type and quantity of bottom/wall profile and rubber profile
for fixed glass
P l a n n i n g / i n s t a l l a t i o nFor planning and installation purposes, please use the installationdrawing code 23949. ( → hawa.ch → Productfinder)
G l a s s s l i d i n g d o o r a n d s o f t c l o s i n g m e c h a n i s m
S o f t M o v e 8 0The maximum deflection of the glass element must not exceed± 2 mm ( 3
32") to maintain the correct functionality of the soft closingmechanism SoftMove 80.
The position of the glass cutout for the soft closing mechanismSoftMove 80 is identical on all three designs, regardless of whetherdamping is on the left side, right side or on both sides.
Pull handles are recommended instead of flush handles for greaterconvenience.
G l a s s c u t o u t sFully tempered monolithic glass and fully tempered laminated glasscan be used.• Glass thickness sliding door fully tempered monolithic glass:
8/10/12/12,7 mm ( 516"/
1332"/
1532"/
12"), thickness tolerance ± 0,3 mm
• Glass thickness sliding door fully tempered laminated glass:2x4 ± 0,2 mm → film thickness 0,38 / 0,76 / 1,52 mm2x5 ± 0,2 mm → film thickness 0,38 / 0,76 / 1,52 mm2x6 ± 0,2 mm → film thickness 0,38 / 0,76 mm
• All glass edges are seamed; maximum 1 mm ( 116") in the glass cutout
• Fully tempered laminated glass permissible with max. offset of2 mm ( 3
32") in the glass cutout• Glass thickness fixed glass (fully tempered monolithic glass and fully
tempered laminated glass) 8–12 mm ( 516"–
1532")
with silicone up to 13 mm (1732")
Please use assembly instructions number 23949 for detailed glasscalculations and to order glass elements.( → hawa.ch → Productfinder)
left right
Glass cutouts without soft closing mechanism
Glass cutouts with soft closing mechanism