11
Hardware Projects Copyright © 2009 Jeff Johnson Flick through my

Hardware Projects

Embed Size (px)

DESCRIPTION

 

Citation preview

Page 1: Hardware Projects

Hardware Projects

Copyright © 2009 Jeff Johnson

Flick through my

Page 2: Hardware Projects

Disclaimer

•To protect the privacy of clients, this presentation does not reveal any company names, nor the names of any products herein described

•This presentation is only intended to provide a quick overview of some of the various hardware that I have designed during my career

Page 3: Hardware Projects

Child Seatbelt Alarm

•Alerts driver when a passenger has unbuckled seatbelt

•RF transmitter and receiver at 916MHz

•Designed for large scale production

 

Page 4: Hardware Projects

Highway Emergency Phone

•MSP430 based•Mixed signal circuit•2-layer PCB• Isolated power supply•Split ground

 

Page 5: Hardware Projects

Vehicle Measurement

•For precise electronic measurement of damaged vehicles

•8051 based•RF transmitter and receiver at

916MHz• Integrated battery charger•Designed for large scale production

 

Page 6: Hardware Projects

Hospital Network Hub

•Links hospital systemsoNurse calloPagersoBed Alloc.

•DSP based• Isolated comm. •4-layer PCB•Ethernet 100Mbps•Design for large scale

production  

Page 7: Hardware Projects

Instant Hot Water Heater

•Electronics to control:oHeating elementoSolenoid valve

•240VAC powered •Water temp

maintained at set value

•MSP430 based•Designed for large

scale production 

Page 8: Hardware Projects

Optical CDMA Modem

•Proof of concept prototype for OCDMA

•FPGA based: Xilinx Virtex-5 XUPV5•Reed-Solomon Forward Error

Correction•1Gbps Ethernet to Optical

Conversion•RocketIO GTPs used for interface

with custom external hardware

Page 9: Hardware Projects

Optical CDMA Modem: Transmitter

•1.25Gbps or 625Mbps operation•Reflective SOA light source in TO-

56•True dark output during silent

periods•PECL inputs•4-layer PCB

Page 10: Hardware Projects

Optical CDMA Modem: Receiver

•1.25Gbps or 625Mbps operation

•Designed for receiving true burst-mode data

•Fixed threshold•Clock & Phase Aligner •8 x Over-sampling •Continuous output for

RocketIO compatibility

•4-layer PCB 

Page 11: Hardware Projects

Want More Information?

•These are only a few of the products I have developed, if you want to know more about my hardware experience, please don't hesitate to contact me:

 •LinkedIn profile:

o http://www.linkedin.com/in/fpgadeveloper •Email address:

o [email protected]