Handpieces_320-341

320 Prices subject to change without notice.For more information, please contact your Patterson Dental representative or local branch (See last page of the Catalogue).

Handpieces

PATTERSON

043-4282

High-Speed Fibre Optic Handpiece Excellent balance, torque and illumination Push-button chuck 25000 Lux light output 400,0 00 rpm/17W torque Standard Head 420,0 00/14W torque Miniature Head Quick disconnect swivel coupler systemfor superior comfort and ergonomics

One-year warrantyStandard HeadEach ............................043-4282 1@ $593.60Miniature HeadEach ............................043-4290 1@ $593.605-Pin Fibre Optic CouplerEach ............................043-4308 1@ $168.196-Pin Fibre Optic CouplerEach ............................043-4316 1@ $168.19

043-4290

043-4308

043-4316

A

B

C

High-Speed HandpieceQuiet operating, fully autoclavable handpiece.Lightweight to reduce fatigue. Six-monthwarranty. Made in U.S.A.A. 4-Hole Standard Head 1@ $202.35Push button ...............043-3912

B. 4-Hole Miniature Head 1@ $216.02Push button ...............043-3938

C. 4-Hole Miniature Head 1@ $158.05Standard Chuck .........043-3920

Handpiece PartsBur Wrench................60030227 1@ $34.85Turbine ReplacementStandard Chuck .........60010101 1@ $110.20

Light Weight Available in mini or standard headpush-button handpiece

Weighs only 33gmMini Head .................043-3862 1@ $199.27Standard ....................043-3854 1@ $200.96

EX 103S Standard 3-Piece E-TypeLow-Speed KitThis is a starter kit for E-Type low-speed system.Less vibration, quiet operation and strongpower at low speed. Each attachment can beinstalled with a snap-quick easily onto theairmotor. This starter kit includes the EX-103airmotor, 4-hole 4:1 reaction maximum speed6250 at 42psi, speed adjustable, EX-6 straightnose cone, 1:1 drive with a light twist type burinstallation/removal, EC contra angle sheath,1:1 drive and NAC-Y latch contra angle head.A. EX-103 E-Type Airmotor 4-Hole6, 250 rpm...................043-2328 1@ $431.42

B. EX-6 E-Type Straight Nose Cone40, 000 rpm.................043-1023 1@ $158.55

C. EC E-Type Contra Angle Sheath40, 000 rpm.................043-4126 1@ $58.30

D. NAC-Y Latch Contra Angle Head30, 000 rpm.................043-4092 3@ $53.00

Hygiene/Lab low-speedHandpieceLight Duty Lab HP and Hygiene HP in One! Compatible with disposable and metalprophy angles

Compatible with 2.35mm diameterstraight burs

Forward/reverse and 360 swivel Variable speed Only 3.1oz Locking chuck 5, 000 rpm 12-month warrantyEach...........................043-2047 1@ $538.80

A

B

C D

HIGH & LOW-SPEED HANDPIECES

Fibre Optic lubricantComes with standard spray nozzle.250ml Bottle .............085-1139 1@ $77.90

Section13_Handpieces_AN:Sect. 02 All._cor 4/10/12 8:43 PM Page 320

321

Handpieces

www.pattersondental.ca

PATTERSON

Description Model(s)/Description Patterson Item Number PriceTurbine with Cap Key KaVo 632/642/643B/633 60020276 1@ $316.40Turbine with Cap Key KaVo 630/640 60020280 1@ $316.40Turbine with Cap Key KaVo 635B 60020277 1@ $332.95Turbine with Cap Key KaVo 647B/649B 60020281 1@ $332.95Turbine with Cap Key KaVo 6000 60020297 1@ $332.95

Cap Key KaVo 647B/649/6000 60030313 1@ $49.35K Spray Handpiece Lubricant 085-2715 1@ $36.16

Multi Nozzle MULTIIflex high speed HP* 085-2731 1@ $10.80Tip Nozzle Handpiece/motors without couplers 085-2780 1@ $11.20

E-Type Nozzle E-Style attachments and low speed 085-2749 1@ $11.20Bulb Replacement Single Bulb 70130422 1@ $38.95Bulb Replacement Bulb 3/Pack 70130277 1@ $109.60

**MMUULLTTIIfflleexx iiss aa rreeggiisstteerreedd ttrraaddeemmaarrkk ooff KKaaVVoo DDeennttaall No imp lication is ma de t hat t hese p roducts a re original factory products or thatthe o riginal manufacturers end orse these products.

Replacement Co mponents

EX-203 E-Type Ai rmotor 4-Hole 1:1 drive, 25,000 rpm a t 42 psi. S peed controlavailable.Each ..................................043-2302 1@ $292.95

BB-Y La tch HeadFor 2 .35 CA b ur. 4 0,0 00 rp m.Each ..................................043-2005 1@ $99.85

NPB-Y PB Lat chFor 2 .35 CA bur. 40 ,000 rp m.Push-Button Ty pe ............043-2021 1@ $122.75

NRS2-Y L atch HeadFor 2. 35 CA b ur. 10:1 sp eed red uction, high-torq ue.Push-Button Ty pe ............043-2054 1@ $104.10

AR-YS Se aled Prophy HeadScrew Type ......................043-4050 1@ $39.00

AR-YK Sealed Prophy H eadKnob T ype ........................043-4035 1@ $ 39.85

TEP-Y E ndo Head For hand file. 9 0 movement.Push-Button Type ............043-2567 1@ $ 86.10

NRS2-U U-type c ontra a ngle for 2.35 CA bur. 10:1 speed re duction, high torque.Push-Button Type ............085-0362 1@ $113.00

FGC-U U-type contra angle for 1.60 FG bur.30,000 rpm.Wrench Type ....................085-0040 1@ $ 94.56

ND-20UU-type latch contra angle. 20,000 rpm. Stationary head.Economy Type..................085-0016 1@ $ 23.50

ARS-1 U-Type Sealed Prophy AngleScrew Type ......................085-0156 1@ $24.20

3@ $23.25

ARK-2 U- Type Sealed Prophy AngleKnob Type ........................085-0180 1@ $30.39

3@ $29.25

E4R E-Type Co ntra Angl e S heath 4:1 speed redu ction.Each ..................................043-2542 1@ $166.00

HandpieceLubricant This non-aerosollubricant is for usewith any h igh- o rlow-speed h and-pieces. The red spraytube allows for e asyaccess a nd w ill notdry out O -rings.Before autoclaving,use one pump oflubricant into a ir supply tube and run3-5 seconds. Contains 2 - 2oz cans with red spray tube.Each ..................................085-0818 1@ $40.00

K-Spray High quality universal aerosol handpiece spray lubricant. R equiresadditional nozzle for use. Made inGermany. 500ml. Nozzles listedbelow.Each ..................................085-2715 1@ $36.16

A. B. C.

Replaceable spray no zzlesA. M ulti Flex-Style NozzleEach...........................085-2731 1@ $10.80B. E-Type NozzleEach...........................085-2749 1@ $11.20C. Tip NozzleEach...........................085-2780 1@ $11.20


Handpieces


PRODRIVE

New Turbine DesignDrive system engages triangular burshank to provide faster cutting, superiorcontrol and improved precision.

Triangular Bur ShankLocks into ProDrive Turbine.

Bur Lengthening FeatureProDrive chuck engages with bur groove to allow for safe 3mm bur extension.

Triangular Bur ShankLocks into PProroDDDrive Turbine.

Worlds First Handpiece UpgradeThe ProDrive Systems patented, triangular bur shank enables the turbine to lock thebur into place resulting in greater concentricity, providing superior torque transfer,smoother handpiece operation, and improved overall control.

Faster CuttingEngineering tests prove that the superior grip of the ProDrive System improves cutspeed versus original manufacturer handpieces.

Superior Control & Improved PrecisionExperience superior margin integrity, cut definition and noticeably smoother cutting withreduced vibration and chatter for all procedures. The exclusive bur lengthening featureallows safe extension by 3mm, providing smooth and high precision cuts in difficult toreach areas.

Patient BenefitsProDrives superior concentricity reduces heat and vibration while cutting, helping toreduce tooth trauma and postoperative discomfort.

Durable High PerformanceReliable and consistent high performance throughout the life of the turbine.

Improve the Performance of your Handpiece

New Turbine DesignDrive system engages triangular burshank to provide faster cutting, superiorcontrol and improved precision.

Bur Lengthening Feature

Lengthened Mode

Standard Mode

ProDrive chuck engages with bur grooveto allow for safe 3mm bur extension.

Triangular Bur ShankLocks into ProDrive Turbine.


323www.pattersondental.ca

Handpieces

Always use ProDrive Burswith ProDrive UpgradeTurbines or Handpieces

ProDrive Upgrade T urbines & Pr oDriveHandpieces will only accommodateProDrive Burs.

Improve the Perf ormance ofyour Handpiece

enables the turbine to lock the b ur into place resu ltingin greater concentricity, providing superior torqu etransfer, sm oother hand piece operation, and imp rovedoverall control.

Bur Lengthening FeatureThe double grooves on the ProDrive bur shank enablesafe bur lengthening resulting in improved accessand versatility. The locking mechanism ensures burretention in either standard or lengthened mode forbetter cut quality and accuracy.

Locking Turbine & Bur Syst emProvidesImproved Handpiec ePerformance

shankenables the turbine to lock the b ur into place resu ltingin greater concentricity, providing superior torqu e

Bur Leenngthening FeaturreThe double grooves on the ProDrive busafe bur lengthening resulting in imand versatility. The locking mechanisretention in either standard or length

ovvidese

rove the Perf ormance ofyoyour Handpiece

st

ckkiningg TuTuImproved Handpdpiece P erformance

ProDrive Standard and Mini High-Speed Handpieces Integrated patented ProDrive turbine Faster cutting, superior control and improved preci sion Durable high performance Ergonomic design Titanium-plated casing Click & Go coupler Low dBa Push-button autochuck Sterilization-resistant glass rod fibre optics 3-port spray

Improve the Performance of your Existing HandpieceDesigned as a turbine upgrade for your current handpiece,the ProDrive System is the fi rst turbineand bur locking system proven toimprove the performance of yourhigh-speed handpieces.

High-Speed Handpieces Upgrade Turbines

Kavo

635B Mira LUX3 includes back cap20025PD.part # 60020361632/633/639/642 includes back cap20071PD.part # 60020362643/645B includes back cap20185PD.part # 60020363SUPERtorque 630 includes back cap20040PD.part # 60020374SUPERtorque 640 includes back cap20041PD.part # 60020375SUPERtorque 647/649 includes back cap20134PD.part # 60020376

Midwest

Tradition Lever includes back cap23067PD.part # 60020365Tradition Push Button/XGTincludes back cap23069PD.part # 60020366Quiet-Air Lever includes back cap23065PD.part # 60020404Stylus includes back cap23082PD.part # 60020410

ProDrive/Sirona

ProDrive & T2 Racer Standard includes back cap24308PD.part # 601-0060ProDrive & T2 Racer Mini includes back cap24305PD.part # 601-0110

W&H

Synea TA-96 includes back cap24340PD.part # 60020406

*Please call for pricing.

22082PD.part # 60020405Star 430 and Solara Series Premium (Ceramic) includes back cap22015PD.part # 60020364Star 430 and Solara Series includes back capStarDentaltarDental

ProDrive Warranty: ProDrive Systems Inc. warrants high-speed air driven handpiece products & upgrade turbines againstdefective materials and wo rkmanship for a period of one year.

Each 043-6329Each 043-6337ProDrive 5-Pin CouplerProDrive 6-Pin Coupler

Quick Couplings

ProDrive Mini High-Speed HandpieceSmall size head (10.2mm).Operating speed: 420,000 rpm.Each. 043-6311

ProDrive Standard High-Speed HandpieceMedium size head (11.4mm).Operating speed: 400,000 rpm.Each 043-6303

The ProDrive Systems patented, triangular bur shankenables the turbine to lock the bur into place resultingin greater concentricity, providing superior torquetransfer, smoother handpiece operation, and improvedoverall control.

Improve the Performa nce ofyour Handpiece The double grooves on the ProDrive bur shank enable

safe bur lengthening resulting in improved accessand versatility. The locking mechanism ensures burretention in either standard or lengthened mode forbetter cut quality and accuracy.

ProDrive Upgrade Turbines & ProDriveHandpieces will only accommodateProDrive Burs.

Bur Lengthening Feature Always use ProDrive Burswith ProDrive Upgra deTurbines or Handpieces

Locking Turbine & Bur System ProvidesImproved Handpiece Performance

3mm of safe bur ext ensionImproved precision and accessibilityin difficult to reach areas.


Handpieces


A-DEC/W&H

A-dec Synea Air-Driven High-Speeds

Roto-Quick Couplers

Item Part NumberTE-98 0.10059835 12mm diameter head 15mm head height without bur Non-lighted 14 watts of turbine power Triple spray Push button chuck SwivelEach ..........................035-5628

Item Part NumberTE-97 0.10059735 10mm diameter head 13mm head height without bur Non-lighted 12 watts of turbine power Triple spray Push button chuck SwivelEach ..........................035-5602

Item Part NumberTE-97RM 0.10059736 10mm diameter head 13mm head height without bur Non-lighted 12 watts of turbine power Triple spray Push button chuck Fixed backEach ..........................035-5610

A-dec Alegra Air-DrivenHigh-Speed Handpieces

Synea TA-98LED+ 0.10069834 035-3029Standard head, penta spray, LED + light

Synea TA-97LED+ 0.10069734 035-3011Mini-head, penta spray, LED + light

Synea TA-98LW 0.10069832 035-3714Standard head, penta spray, halogen light

Synea TA-97LW 0.10069732 035-3706Mini-head, penta spray, halogen light

Synea TA-98 0.10069831 035-2971Standard head, penta spray, no light

Synea TA-97 0.10069731 035-2963Mini-head, penta spray, no light

Synea TA-98LM 0.10069833 035-2955Standard head, penta spray

Synea TA-97LM 0.10069733 035-2948Mini-head, penta spray

RQ-24 Roto-Quick0.10402430 035-3914

6-pin

6-pin

5-hole

4-hole

RA-24 Roto-Quick0.10402431 035-2930

RA-25 Roto-Quick0.10402531 035-2922

RQ-04 Roto-Quick0.10400430

Multiflex-Style Coupler(not sold by A-dec)

Quick Disconnect Swivel Couplers

* Please call for pricing.



Handpieces

A-dec Synea Gear-Driven Attachments

Electric and Air Motors

Synea WA-99LT 0.10269930 035-28981:5 Ratio / 180,000-20 0,0 00 rpm electric motorPenta Spray, LED or halogen light

Synea WA-56LT 0.10265630 035-28801:1 Ratio / 25, 000 rpm air motor

40, 000 rpm electric motorSingle Spray, LED or halogen light

Synea WA-66LT 0.10266630 035-28642:1 Ratio / 12, 500 rpm air motor


Synea WA-86LT 0.10268630 035-287210:1 Ratio / 2,500 rpm air motor


Synea HA-43LT 0.10164330 035-28561:1 Ratio / 25, 000 rpm air motor


Synea HA-43A 0.10164331 035-28491:1 Ratio / 25, 000 rpm air motor

40, 000 rpm electric motorSingle Spray, no light

AM-25LT0.10002530 035-5479Lowspeed Air Motor5, 000-25, 000 rpm

6-pin

RQ-24 Roto-Quick0.10402430 035-2914

A-dec EA-52 LED Electric Motorfor 532, 533, 542, 332,333, 334 and 335 Grey 54.0350.00for 541 Grey 54.0352.00for 532, 533 and 542 Surf 54.0342.00for 541 Surf 54.0344.00300-40,0 00 rpmFactory- or dealer-installed on A-dec 500

and A-dec 300 delivery systems

A-dec W&H EA-40LT 54.0169.00Electric Motor 2,0 00-40, 000 rpmFactory-installed on Radius delivery systems

Dealer-installed kit for Cascade/Radius styledelivery systems

A-dec W&H EA-40LT 54.0163.00Tabletop Electric Motor 2, 000-40, 000 rpm



Handpieces


A-DEC/W&H (CONT.)

A-dec Alegra Gear-Driven Attachments

Item Part # Patterson #WE-99LED G 0.10259930 035-5487 1:4.5 speed increasing ratio (highspeed) Push button chuck for 1.6mm friction gripburs

Triple spray Self-generating LED light E-style 20mm diameter Maximum operating speed 180,000 RPM

Item Part # Patterson #WE-99A 0.10259931 035-5495 1:4.5 speed increasing ratio (highspeed) Push button chuck for 1.6mm frictiongrip burs

Triple spray Non-lighted E-style 20mm diameter Maximum operating speed 180,000 RPM

Item Part # Patterson #WE-57 0.10255732 035-5503 1:1 ratio (lowspeed) Push button chuck for 1.6mm friction gripburs

No spray Non-lighted E-style 20mm diameter Maximum operating speed 26,600 RPM

Item Part # Patterson #WE-56A 0.10255631 035-5529 1:1 ratio (lowspeed) Push button chuck for 2.35mm latch burs Single spray Non-lighted E-style 20mm diameter Maximum operating speed 40,000 RPM

Item Part # Patterson #WE-56 0.10255632 035-5453 1:1 ratio (lowspeed) Push button chuck for 2.35mm latch burs No spray Non-lighted E-style 20mm diameter Maximum operating speed 40,000 RPM

Item Part # Patterson #WE-66 0.10256632 035-5552 4:1 decreasing ratio (lowspeed) Push button chuck for 2.35mm latch burs No spray Non-lighted E-style 20mm diameter Maximum operating speed 20,000 RPM

Item Part # Patterson #HE-43A 0.10154331 035-5560 1:1 ratio (straight) Single spray Non-lighted Twist-tension chuck Use with 2.35mm lab type burs or latch burs E-style 20 mm diameter Maximum operating speed 40,000 RPM

Item Part # Patterson #WE-66LED G 0.10256630 035-5537 4:1 decreasing ratio (lowspeed) Push button chuck for 2.35mm latch burs Single spray Self-generating LED light E-style 20 mm diameter Maximum operating speed 20,000 RPM

Item Part # Patterson #WE-56LED G 0.10255630 035-5511 1:1 ratio (lowspeed) Push button chuck for 2.35mm latch burs Single spray Self-generating LED light E-style 20 mm diameter Maximum operating speed 40,000 RPM

Item Part # Patterson #WE-66A 0.10256631 035-5545 4:1 decreasing ratio (lowspeed) Push button chuck for 2.35mm latch burs Single spray Non-lighted E-style 20mm diameter Maximum operating speed 20,000 RPM

Item Part # Patterson #HE-43 0.10154332 035-5578 1:1 ratio (straight) No spray Non-lighted Twist-tension chuck Use with 2.35mm lab type burs or latch burs E-style 20mm diameter Maximum operating speed 40,000 RPM * Please call for pricing.



Handpieces

Item Part # Patterson #AM-25 0.10002532 035-5461 Non-lighted 5,000-25,000 RPM 45 psi drive air pressure Connects to 904 and RQ-04 Roto-Quick coupler

Item Part # Patterson #AM-25RM 0.10002534 035-5446 Non-lighted E-style 45 psi drive air pressure Fixed back RM connection (no swivel)

Item Part # Patterson #AM-25A 0.10002533 035-5586 Non-lighted E-style Spray coolant 45 psi drive air pressure Connects to 904 and RQ-04 Roto-Quick coupler

Item Part # Patterson #AM-25A RM 0.10002531 035-5594 Non-lighted E-style Spray coolant 45 psi drive air pressure Fixed back RM connection (no swivel)

Item Part #EA-41 Tabletop 54.0346.00EA-41 Integrated Kit (for 2122 54.0348.002132,2240, 2250 delivery systems)

Item Part #EA-30 Electric Motor System 54.0297.00Factory or dealer installed integrated electric motor for A-dec 300includes: A-dec EA-30 electric motor A-dec EA 1.0 control module A-dec VE-6 61 handpiece tubing Controlled by A-dec 300 Deluxe Touchpad and integratedfoot control

A-dec Electric and Air Motors

Assistina 301 Plus Maintenance SystemStandard Features Expels debris from handpiece air and water channels Rotates gears on low speeds to improve purging of debris Integrated filter system contains expelled vapour No electricity required Air pressure operating range is 60-150 psi. Quick-disconnect system

Assistina 301 Plus 0.00030135Includes: 20 fleece liners Maintenance liquid (1 litre) Service oil (0.5 litre) 2 universal adapters Filter, air line, exhaust air O-rings Colour-coded funnels; for use with maintenanceliquid and service oil

Each ..................................035-4035 1@ $2,764.07

A-dec Handpiece Maintenance



Handpieces


A-DEC/W&H (CONT.)

Universal Adapter for Assistina 0.02685000Accepts most handpiece quick-disconnect adapters.Each ............................60060130 1@ $110.35

Assistina Roto-Quick Adapter for TA-98LWand TA-96LW 0.03104500Each ............................035-5297 1@ $234.24

1 Litre Bottle CleaningLiquid 0.02680230Each ............................103-0725 1@ $59.76

.5 Litre Bottle Service Oil 0.02675930Each ............................103-0717 1@ $114.52

Fleece Liner 0.026903005/Pkg...........................103-0253 1@ $19.58

Assistina Roto-Quick Adapter for 896, 898,TA-98L and TA-96L 0.02690400Each ............................035-4472 1@ $234.24

Assistina Accessories

Service Oil Spray Can 400mlEach ............................103-0733 1@ $61.71

Replacement Turbine for Models 795, 798,895, and 898 0.02760000Each ............................60020155 1@ $339.10

High-Speed Accessories

Replacement Turbine for Models 896 and896RM 0.02765500Each ............................60020064 1@ $347.70

Handpiece Pressure Gauge 50.0271-00Fits all handpiece couplers.Each ............................60030189 1@ $269.50

Replacement Bulbs for all Models except theLT25 Low Speed Motor 0.02207600Each ............................70130037 1@ $100.55

Replacement Bulb for RA-24 0.03523000Each ............................70130292 1@ $101.25

Spray Cap for Models 896, 898LE, TA-98L andTA-96L 0.02229200Each ............................60071115 1@ $33.15

Spray Cap for Models 896RM, 898RM,TC 95RM 0.02036100Each ............................60071165 1@ $13.85

Replacement Turbine for Model 898LE0.02748509Each ............................60020179 1@ $703.40

Replacement Turbine for Model TC-95RM0.03305000Each ............................60020213 1@ $576.10

Replacement Turbine for Models TA-98L,TA-98LW and TA-98 0.03506000Each ............................60020270 1@ $390.55

Replacement Turbine for Models TA-96L,TA-96LW and TA-96 0.03505500Each ............................60020271 1@ $403.70


Spray Cap for TA-98LW and TA-96LW0.03522500Each ............................60071636 1@ $31.15



Handpieces

MIDWEST

maximum cutting efficiencyHIGH-SPEED FIBRE OPTIC HANDPIECES

Enjoy superior intraoral access, great visibility and strong, controlled cutting power with a fulloffering of Midwest Stylus high-speed handpieces. Stylus offers best-in-class performance,power, durability and ergonomics. Available in Standard or EasyCare (grease-packed,sealed bearings for easy maintenance) models. Both offer a 24-month warranty.

Midwest Stylus ATC.Part Air, Part ElectricAll Performance.

Midwest Stylus Standard Handpiece

Midwest Stylus Lite Handpiece

Midwest Stylus Mini Handpiece

Power of a large head packed in a mid-sizehead Whisper-quiet operation 4-port water spray for consistent bur cooling Fused-rod fibre optics for greater light output KaVo compatible option - Easily integratesinto offices currently using MULTIflex LUXcouplers

Most powerful mini head handpiece Excellent for small mouthed patients, patientswith TMJ, pediatric cases, geriatric cases Accepts BOTH Regular and Short Shank Burs KaVo compatible option - Easily integratesinto offices currently using MULTIflex LUXcouplers

Slim design for small hand users and forclinicians where weight, balance and grip areimportant Reduced weight = 61 grams KaVo compatible option - Easily integratesinto offices currently using MULTIflex LUXcouplers

Starter Package with 2 handpiecesStylus ATC 890 Handpiece ..........042-8151Stylus ATC 990 Handpiece ..........042-8144

Starter Package with 3 handpiecesStylus ATC 890 Handpiece ..........042-8110Stylus ATC 990 Handpiece ..........042-8102

Stylus Lite 360S - Standard ........................................................042-8300Stylus Lite 360E - EasyCare ......................................................042-8318Stylus Lite 361S - Standard ........................................................043-0090Compatible with MULTIflex LUX Coupler*.Stylus Lite 361E - EasyCare ......................................................042-8284Compatible with MULTIflex LUX Coupler*.

Stylus Mini 540S - Standard ........................................................042-8276Stylus Mini 540E - EasyCare ......................................................042-8268Stylus Mini 541S - Standard ........................................................042-8250Compatible with MULTIflex LUX Coupler*.Stylus Mini 541E - EasyCare ......................................................042-8243Compatible with MULTIflex LUX Coupler*.

*MULTIflex LUX is a registered trademark of KaVo Corporation.

Delivers the power and efficiency of an elec-tric handpiece with the precision, access andlightweight feel of an air handpiece Adapts to your cutting technique to providethe power when you need it most

Stylus 180S - Standard ................................................................042-9977Stylus 180E - EasyCare ..............................................................043-0017Stylus 181S - Standard ................................................................043-0058Compatible with MULTIflex LUX Coupler*.Stylus 181E - EasyCare ..............................................................043-0074Compatible with MULTIflex LUX Coupler*.



Tradition-L Cartridge 780118With cap wrench, without head cap and lever.Each ............................60020094 1@ $528.05

Tradition Cartridge 750118With cap wrench.Each ............................60020081 1@ $444.30

XGT/Tradition-PB Cartridge 790118With cap wrench, without head cap.Each ............................60020209 1@ $559.75

Handpieces


MIDWEST (CONT.)

Stylus Quiet-airHigh torque for heavy cutting in a big head.Consistent, reliable performance.6-month warranty. Two chucking options available:standard and leverQuiet-air-L Handpiece 780014With power lever chuck.Each ............................042-8540Quiet-air in-sight Handpiece 730014With conventional chuck.Each ............................042-8508

Stylus TraditionHigh torque for a smooth, controlled cut ina mid-sized head. Consistent, reliableperformance. 6-month warranty. Three chucking options available:standard, push-button and lever

Stainless steel constructionTradition Handpiece 750045With conventional chuck.Each..............................042-8581Tradition-L Handpiece 780045With power lever chuck.Each..............................042-8623Tradition-PB Handpiece 790045With push-button chuck.Each..............................042-8573

PowerOptic Light SoursePowerOptic Light Source 650200Includes lamp control, remote intensity control,power supply, AC power cord, installation kit Supplies power for 1-3 bulbs in dentalhandpieces, couplers or hoses

Works with AC voltages from 100-240 VAC,50 and 60Hz

Single product configuration meets all majorvoltage and regulatory requirements for U.S.and Canada

Each..............................042-8672

High-Speed Accessories

High Speed HandpieceAccessories

Replacement TurbinesFor all versions of Stylus Regular andStylus Lite high-speed handpieces.

Stylus Standard ReplacementTurbine 790310Each...........................60020306 1@ $618.25

Stylus EasyCare ReplacementTurbine 790510Each...........................60020348 1@ $559.70

Stylus Mini Standard ReplacementTurbine for Stylus Mini Handpieces792310Each...........................60020338 1@ $593.20

Stylus Mini EasyCare ReplacementTurbine for Stylus Mini Handpieces792510Each...........................60020339 1@ $569.80

Stylus 5-hole Coupler 790245Each...........................042-8797 1@ $412.65

Stylus 6-pin Coupler 790246Each...........................042-8839 1@ $515.78

Quiet-air-L Cartridge 484300With cap wrench, without head cap and lever.Each ............................60020101 1@ $559.80

Quiet-air Std Cartridge 464300With cap wrench.Each ............................60020009 1@ $476.10

Gasket 5-Hole Red Quick-Connect 753342Each ............................60050091 1@ $38.25

Gasket 5-Tube Fibre OpticHose Connector 773018Each ............................60050053 1@ $10.70

Replacement Chucks

Tradition Chuck 753244Each ............................60010065 1@ $91.85

Bur Wrenches

A. Tradition, 8000 & 8000-I 750119Each ............................60030087 1@ $72.65

B. Quiet-air Wrench 463102Each ............................60030009 1@ $72.65


A. Lamp for In-sight II andIn-sight (I) 490874Each ............................70130029 1@ $47.15

Replacement Bulbs/Lamps

B. Bulb for Power Optic Quick-ConnectHose w/Swivel 650064Includes bulb tool.2/Pkg...........................70130088 1@ $125.35

Tool for above 753399 60030211 1@ $7.80

C. Bulb for Power Optic With or WithoutSwivel 6501973/Pkg...........................70130087 1@ $125.40

Bulb for XGT 5-Hole Power Optic and 6-PinCoupler 790257Each ............................70130293 1@ $155.90

Turbine CartridgesReplacement Cartridge Kit

B

A



Handpieces

Low Speed Handpiece Systemstems

Shorty Single-Speed Air Motor

Push-Button Latch Type

Push-Button Friction Grip

Prophy Contra Head

Shorty Two-Speed Air Motor

Prophy Right Angle

HEADSPush-Button Low-Speed Angles (Use with Shorty and Rhino XPmotors and attachments)Latch Type 042-8490Friction Grip 042-8482

ATTACHMENTSU-Style Adapter(Use with Shorty and Rhino XP motors)Accepts Universal/Doriot angles042-8961

Straight Attachment042-8953

Contra Angle Sheath042-8946

Prophy Right An gle Sheath

MOTORSShorty Single-Speed Air Motor4-Hole Connection, 0-6000 rpm042-8664

Shorty Two-Speed Air Motor4-Hole Connection, 0-6000 rpm &0-30,000 rpm042-8706

Rhino XP Single-Speed Air Motor4-Hole Connection, 0-8000 rpm042-8748

Prophy Contra Angle HeadTriple Seal, Screw-In Type042-8946

Prophy Right Angle HeadTriple Seal, Screw-In Type042-8920

Prophy Right Angle Sheath Rhino XP Single-Speed Air MotorRhino XP Single-Speed Air Motor

Straight Attachment

Contra Angle Sheath

U-Style A dapter

Midwest RDH Ergonomic shape for more natural handpositioning and greater comfort

Lightweight design for reduced handand wrist fatigue

Smooth 360 swivel for excellentmaneuverability

Low pressure start-up for greater controland less paste splatter

Removable, autoclavable colour bandsfor handpiece identification

RDH Hygienist HandpieceWith prophy right angle.Single Package 740020Each ............................042-8870Three-Pack 7400303/Pkg...........................042-8912Replacement Colour BandsFor colour coding RDH hygienist handpieces.6/Pkg760011R Orange .......489-2238 1@ $11.90760012R Pink .............489-2246760013R Yellow.........489-2253760014R Violet ..........489-2261760015R Blue .............489-2279760016R Green ..........489-2287RDH Hygienist Handpiece

For disposable angles.Single Package 740000Each ............................042-8854Three-Pack 7400103/Pkg...........................042-8896

Midwest RDHFreedomThe new RDH Freedom

Hygienist Handpiece is a cordlesshandpiece that can polish teethall day on one charge. The cord-less system includes a wirelessfoot pedal for flexibilityand portability and a uniqueDisposable Prophy Angle (DPA)designed to allow all day batterylife, provide consistent perform-ance and eliminate one of themajor reasons for handpiece repairs today:broken DPA shafts. The next generation ofRDH Hygienist Handpieces addresses the #1concern Hygienists have with their low speedhandpieces today, which is dealing with corddrag.Midwest RDH Freedom Basic Kit, 120VEach ............................082-8045

Midwest RDH Freedom Premium Kit, 120VEach ............................082-8029



Handpieces


MIDWEST (CONT.)

Midwest eStylus Electric MotorSystem 874400Includes eStylus controller and remotedisplay/control, transformer and power cord,eStylus electric motor and mounting bracket Powerful, smooth and consistent torque Wireless radio-frequency remote controland display unit

Pre-set buttons for high-speed, low-speedand endo procedures

15 speed/procedure memory locations forspecialized speed settings

ENDO mode with torque-limiting,auto-reverse and on-off foot control

One-year warranty on motor, hoseand controller

Each............................042-90921:5 Speed-Increasing High-SpeedAttachment 774105Push-button chuck accepts friction-grip burs.4-port water spray offers exceptional coolingand flushing. Allows high-speed operations upto 200,000 rpm. Provides smooth, powerfultorque. FusionOptics provide brilliant,long-lasting light.Each..............................042-9118

1:1 Low-Speed Attachment 774111Push-button chuck accepts latch-type burs.Allows low-speed operations up to 40,000 rpm.Provides smooth, powerful torque.FusionOptics provide brilliant,long-lasting light. Ergonomic, dimplegrip for less fatigue.Each..............................042-9134

10:1 Endodontic Attachment 774110Push-button chuck accepts latch-type bursand endo files. Allows low-speed andendodontic procedures from 150 rpm up to4,000 rpm. FusionOptics provide brilliant,long-lasting light. Use the controller ENDOmode to provide torque limiting, auto-reverse and constant speed control forrotary endodontic procedures.Each...........................042-9159

1:1 Straight Attachment 774001Accepts HP style burs and also disposableprophy angles (like NUPRO revolv).1:1 straight attachment with twist-lockchuck for procedures up to 40,000 rpm.Each...........................042-9175

Handpiece Air Station 380800Air source for sterilization area. Eliminates needto return to the operatory to expel debris dur-ing infection control maintenance procedures.Includes box of 12 spray guards.Each ..................042-9969 1@ $868.28

Nozzle for Midwest PlusAerosol Spray 380085Stylus/XGTEach...........................492-8156 1@ $30.05Nozzle for Midwest PlusAerosol Spray 380087eStylusEach...........................492-8164 1@ $31.50Midwest PlusAerosol Lube 380080 (without nozzle)Each...........................494-0854 1@ $95.00Midwest Plus Spray Tips 380986For spray bottle.6/Pkg ........................492-7059 1@ $3.45

Spray Guards 380150Disposable receptacle captures debrisexpelled during infection controlmaintenance procedures.100/Box......................492-7026 1@ $59.45

Handpiece Cleaners andLubricantsMidwest Plus Handpiece MaintenanceKit 380145Contains 2oz lubricant dropper;8oz cleaner sprayEach...........................489-2212 1@ $102.40Midwest Plus Handpiece Lubricant2oz Dropper 380130Each...........................489-2188 1@ $61.908oz Refill 380131Each...........................489-2311 1@ $200.50Midwest Plus Handpiece Cleaner8oz Cleaner 380140Each...........................489-2196 1@ $34.451 Litre Refill 380141Each...........................489-2204 1@ $143.00




Handpieces

MORITA

Lubrina Automatic HandpieceMaintenance SystemIt will service up to 4 handpieces in just100 seconds and will accommodatecontra-angles, straight handpieces,air driven handpieces, and air scalers.

Lubrication & Sterilization TipsRead and follow the lubrication and maintenanceinstructions for your particular high speed andlow speed handpieces and attachments.

Always remove bur from high speed or lowspeed handpiece before cleaning andsterilizing. Before cleaning your low speedhandpiece, disconnect contra-angle head andsheath from motor.

Clean all external surfaces using a smalltoothbrush with isopropyl alcohol or water.

Use steam sterilization. Do not use dry heatsterilization. Do not expose handpiece tochemical disinfection or cold sterilization byimmersion techniques, Surgical Milk, surfacewipes, handsoaps, detergents or surfacesprays. Do not sterilize in bags containingdisinfectants.

Place handpiece in paper sterilization bag orpaper/plastic sterilization pouch only.

Temperature during sterilization cycle shouldnot exceed 135 F.

Remove handpiece from sterilizer after dryingcycle ends and allow to cool in bag.

To prolong life of your handpiece,be certain you read and follow the lubricationinstructions that camewith your handpiece.

AR Spray Handpiece Lubricant420mlCan..............................518-4486 1@ $50.44.................................... 3@ $48.47

NSK

S-Max M Stainless Steel Body ISB Turbine Cellular Glass Optics Ceramic Bearings Clean Head System Push Button Chuck Quattro Spray

M500L - Miniature Head (Optic)Each ............................044-5213

M600L - Standard Head (Optic)Each ............................044-5221

Connect to NSK Couplings

M500KL - Miniature Head (Optic)Each ............................044-5239

M600KL - Standard Head (Optic)Each ............................044-5247

Connect direct to KaVo MULTIflex

S-Max picoThe innovative air turbine with ultra minihead and super slim bodyThe NSK S-Max pico series has been developedfor the operation of Minimal Intervention(M.I.). The Ultra mini head and super slimshape through high technological capabilitiesof NSK is ensure that wide visibilities and airyoperational feeling. Stainless Steel Body ISB Turbine Cellular Glass Optics Ceramic Bearings Clean Head System Single Spray

pico (Optic)Each ............................044-5338


pico KL (Optic)Each ............................044-5346

Connect to KaVo, Sirona,W&H, Bien-Air Couplings

Ti-Max NL400Internal Water SprayElectric Micromotor Portable System. Speed: 2,000 - 40,000 min-1

Torque: 3.4 NcmNL400 System (Optic)Contains: NL400U (Control Unit) Ti-Max NL400 MC (Motor) Ti-Max NL400 CD (Cord) NLAC (AC Adaptor)Each ............................044-5155



Handpieces


NSK (CONT.)

Ti-Max XContra-Angles Titanium Body with Scratch ResistantDURACOAT

Cellular Glass Optics Clean Head System Push Button Chuck

X95L (Optic) - 1:5 Increasing Quattro Spray For FG burs (1.6) Ceramic Bearings Max Speed: 200,000 min-1

Each ............................044-5171

X25L (Optic) - 1:1 Direct Drive Single Spray For CA burs (2.35) Max Speed: 40,000 min-1

Each ............................044-5163

X15L (Optic) - 4:1 Reduction Single Spray For CA burs (2.35) Max Speed: 10,000 min-1

Each ............................044-5189

X85L (Optic) - 1:5 Increasing Single Spray Miniature Head For FG burs (1.6) - Short Shank burs only Ceramic Bearings Max Speed: 200,000 min-1

Each ............................044-5205

Ti-Max XAir Turbines Titanium Body with Scratch ResistantDURACOAT

ISB Turbines Cellular Glass Optics Ceramic Bearings Clean Head System Push Button Chuck Quattro Spray

X500L - Miniature Head (Optic)Each ............................043-2997


X600L - Standard Head (Optic)Each ............................043-3003

X700L - Torque Head (Optic)Each ............................043-3011

Connect direct to KaVo, W&H Couplings

X600KL - Miniature Head (Optic)Each ............................043-3029X600KL - Standard Head (Optic)Each ............................043-3037X600KL - Torque Head (Optic)Each ............................043-3037

LED Couplings Stainless Steel Body Titanium Coating Non-Retraction Valve LED Incorporated in coupling

PTL-CL-LED (Optic)For NSKEach ............................044-5262

PTL-CL-LEDIII (Optic)For NSK with water volume adjusterEach ............................044-5270

KCL-LED (Optic)For KaVo MULTIflex LUX withwater volume adjusterEach ............................044-5254

Care 3 PLUS C1 or C2 TypeCare 3 Plus automatically cleans and lubricatesup to 3 handpieces at one time with the touchof a button. Both high speed and low speedhandpieces are processed thoroughly in asingle 2-minute operation cycle.

Care 3 Maintenance OilEach ............................544-5028 1@ $86.47




Handpieces

SABLE INDUSTRIES

High Speed HandpiecesKaVo Type High Quality Fibre Optic Push Button Triple Spray Quick Connect 360o Swivel Ceramic Bearings

Access S4500KLMini Head HandpieceEach ............................045-4397

RotaMax S6500KLTorque Head HandpieceEach ............................045-4405

KaVo Type Couplers Power Optic ISO 6 Holes Quick Connect 360o Swivel

MULTIflex LUX TYPEEach ............................046-4966

MULTIflex LUX TYPE LEDEach ............................045-4413

High Speed HandpiecesNSK Type High Quality Fibre Optic Push Button Triple Spray Quick Connect 360o Swivel Ceramic Bearings

S600NLStandard Head HandpieceEach ............................046-4990

S700NLTorque Head HandpieceEach ............................046-4396

NSK Type Couplers Power Optic ISO 6 Holes Quick Connect 360o Swivel

NLC400Each ............................045-8760

NLC400LED LEDEach ............................046-3810

Contra-angles

MULTIflex 4 HolesEach ............................046-4958

Ball Bearing 1:1Accepts Kavo HeadsEach ............................046-4891

Ball Bearing Swing Latch Head 1:1Each ............................046-4917

Ball Bearing Push Button Head 1:1Each ............................046-4925

Low Speed HandpiecesKaVo Type

20K Air MotorEach ............................046-4943



Handpieces


SCICAN

Statis 1.1 S20002Contra Angle 1:1 transmission Push button auto chuck 3-port fan-shaped spray Non-return valve Sterilizable at 135CEach...........................046-5047

Statis 1.5L S20000Contra Angle 1:5 speed increasing Dual cellular optic Push button auto chuck withanti-heat system

3-port fan-shaped spray Non-return valve Sterilizable at 135CEach...........................046-5021

Statis ML 201.1 S10000High-speed Handpiece Cellular optics Push button auto chuck 4-port fan-shaped spray Automatic drive air adjustment Non-return valve Fits Connex or MULTIflex style coupling Sterilizable at 135CEach...........................046-5369

Statis SL 101.1 S10001High-speed Handpiece Cellular optics Push button auto chuck 1-port fan-shaped spray Automatic drive air adjustment Non-return valve Sterilizable at 135C Fits Connex or MULTIflex style coupling Smallest head size 3-year warrantyEach...........................045-7986

Statis AM 20 S21001Airmotor without light From 5, 000 to 20, 000 rpm Fits 4-hole tubing Internal spray coolant Variable speed Forward/reverse E-type connectionEach...........................046-5088

Statis 6.1P S20004Prophy Contra angle 6:1 reduction For snap-on or screw-in prophy cups orbrushes

Sterilizable at 135C

Each ..........................046-5062

Statis 4.1 S20003Contra Angle 4:1 reduction Push button auto chuck 3-port fan-shaped spray Non-return valve Sterilizable at 135CEach...........................046-5054

Statis 1.1L S20001Contra Angle 1:1 transmission Dual cellular optic Push button auto chuck withanti heat system

3-port fan-shaped spray Non-return valve Sterilizable at 135CEach...........................046-5039

Statis 1.1 ST S20005Straight Handpiece 1:1 transmission Locking ring 1-port spray Sterilizable at 135CEach...........................046-5070

Statmatic SpraySTM500-6NAHandpiece maintenance spray foruse in SciCan s Statmatic automaticlubricating unit as well as otherautomatic lubricating devices thatutilize a canister type delivery system,including those employing the newscrew type adapter attachment system.Each ............................634-1697 1@ $42.10

Statis Connex L S100026-pin coupling with light connection andanti-reflection valve.Each...........................046-5096

Statis Connex GR S110025-hole coupling with glass rod andanti-retracting valve.Each...........................046-5104

Statmatic S30000The ultimate care system for handpieces andtheir chuck mechanisms.Quick and thorough: 10-year guarantee only from SciCan Unique chuck care system Can coupling with unique safety valve Automatically cleans and maintains upto three handpieces. Cycle time only15 Seconds per handpiece.

Chemical/physical cleaning with foamingcare agent

Optimal lubricant coverage throughout thehandpiece

Compressed-air connection: excesslubricant purging

Automated reproducible quality of care Easy spray can insertion Absorption pad for excess lubricantEach...........................045-8000

Statis Handpieces and Accessories

STATCARE Spray S500NA-6NAEach...........................634-1911 1@ $42.10




Handpieces

SIRONA

T2 ControlPowerful handpiece with torque control,250,000 rpm.For Sirona Connection58 27 840For KaVo Connection58 27 857For W&H (924 Roto-Quick) Style Connection58 27 865For NSK Connection58 27 881

T2 RacerPowerful handpiece with a small head,400,000 rpm.For Sirona Connection58 27 949Each ........................045-9727For KaVo Connection58 27 956For W&H (924 Roto-Quick) StyleConnection58 27 964For NSK Connection58 27 980

High-Speed Handpieces

T2 High-SpeedHandpiecesThe T2 Premium Class offersleading-edge technology andoutstanding Sirona product quality.Designed to have increased torque toreduce chattering and greater controlover prep. Titanium-plated casing Ergonomic design molded to theshape of the hand

Push-button chuck Optimum working speed Comfortable noise levels Double anti-retraction stop High-tech stainless steel bearings Click and go function Changeable three-ring spray Three-year warranty Sterilization-resistant glassrod fibre optics

T2 miniPowerful handpiece with a mini head,420, 000 rpm.For Sirona Connection 58 28 202Each ............................045-0726

For KaVo Connection 58 28 210Each ............................045-9719

For W&H (924 Roto-Quick) Style Connection58 28 228Each ............................045-9735

High-SpeedAccessoriesSirona Quick-Coupling R, 18 94 588For T2 high-speed handpieces, 4-hole standardconnection with light and spray regulation.Each ............................045-9305

Sirona Quick-Coupling F, 41 74 467For T2 high-speed handpieces, 4-hole standardconnection with light and spray regulation.Each ............................045-9321

Replacement TurbinesFor T2/T3 Racer 59 57 134Each ............................60020340 1@ $538.10

For T2/T3 mini 59 57 142Each ............................60020341 1@ $538.10

SiroTorque LThe control box converts air to electric move-ment for quiet and smooth, yet powerful, con-stant speed and high torque at every speed. Constant high torque through electriccompensation

Broad application speed range 17-200, 000rpm with handpieces

Available with Motor SL and Motor EL 1 withISO interface

Digital speed control Water spray regulation at the motorand 360 degree swivel

T1 Classic Stress-free working thanks to the low weightand perfect balance

High quality solid titanium casing is easyto grip and pleasant to the touch

Extremely broad speed range geared toa wide variety of different tasks

S 200 L, 58 98 866Complete with attachment for FG burs, push-button chuck, changeable three-jet spray andsterilization resistant glass rod fibre optics.1:5 ratio, up to 200, 000 rpm.Each ............................045-0007

S 40 L, 58 98 874Complete with attachment for contra angledrills, push-button chuck, changeable three-jetspray and sterilization resistant glass rod fibreoptics. 1:1 ratio, up to 40, 000 rpm.Each ............................045-0015


SiroTorque L+SiroTorque L+ is the perfect electronicunit for the BL and BL ISO brushlessmicromotors. Compact tabletop canbe quickly and easily integrated intoany treatment unit with air and watersupply. Provides continuous, quiet andsmooth operation. Motor speed rangeof 90 to 40,000 rpm, even with quickchanges in motor speed. Features abroad application of 4 to 200,000 rpmwith handpieces.

SiroTorque L+ Motor BL (Classic)60 56 431

SiroTorque L+ Motor BL (ISO)60 47 091


Handpieces


SIRONA (CONT.)

S 6 L, 58 98 882Complete with attachment for contra angledrills, push-button chuck, changeablethree-jet spray and sterilization resistant glassrod fibre optics. 6:1 ratio, up to 6, 600 rpm.Each ............................045-0023

S 1.6 L, 58 98 890Same features as the S 6 L except for 24:1ratio, up to 1, 600 rpm.Each ............................045-0031

Contra-angle PROPHY, purple, 58 99 278For prophylaxis. For screw-in and snap-onbrushes. 2.4:1 ratio, up to 7,0 00 rpm.Each ............................045-0049

Profin 04 L, 58 99 237With sterilization resistant glass rod fibre opticsand one-jet spray with oscillating stroke move-ment. Stroke: 0.4mm.Each ............................045-0056

Profin 11 L, 58 99 245Same features as the Profin 04 L except Stroke:1.1mm.Each ............................045-0064

Endo L, 58 99 260With sterilization resistant glass rod fibreoptics. Push-button chuck for manualinstruments with adapter for contraangle instruments. Alternating rotationapproximately 60 degrees. Ratio 9.5:1, up to4, 000 rpm.Each ............................045-0072


T1 Line Smooth surface no corners, slits, or holes High-quality solid titanium casing is easy togrip and pleasant to the touch Anti-retraction stop

C 40 L, 33 28 437Complete with attachment for contra angledrills, push-button chuck, changeable three-jetspray and sterilization resistant glass rod fibreoptics. 1:1 ratio, up to 40,0 00 rpm. Also avail-able in a non-lighted model.Each ............................045-9222

C 6 L, 33 28 429Complete with attachment for contra angledrills, push-button chuck, changeable three-jetspray and sterilization resistant glass rod fibreoptics. 6:1 ratio, up to 6,0 00 rpm. Also availablein a non-lighted model.Each ............................045-9248

C 1.6 L, 33 28 411Same features as the C 6 L except for 24:1 ratio,up to 1,6 00 rpm. Also available in a non-lightedmodel.Each ............................045-0106

Prophy, 18 94 901For prophylaxis. For screw-in and snap-onbrushes. 2.4:1 ratio, up to 7,0 00 rpm.Each ............................045-9271

Profin 0.4 L, 33 29 260With sterilization resistant glass rod fibre opticsand one-jet spray with oscillating stroke move-ment. Stroke: 0.4mm.Each ............................045-9289

Endo L, 58 69 552With sterilization resistant glass rod fibre optics.Push-button chuck for manual instruments withadapter for contra angle instruments.Alternating rotation approximately 60 degrees.Ratio 9.5:1, up to 4, 000 rpm. Also available in anon-lighted model.Each ............................045-0122

H 40, 33 29 054For standard handpiece and contra angle drills,one nozzle spray. Ratio 1:1, up to 40,0 00 rpm.Each ............................045-9263

Profin 1.1 L, 41 77 015Same features as the Profin 04 L except Stroke:1.1mm.Each ............................045-0114

T1 Spray 59 01 665Lubricant spray for Sirona handpieces 250ml.6/Pkg...........................560-1505 1@ $37.74

Sirona

Bio Lube Southland DistributionHandpiece Cleaner and LubricantsSynthetic biodegradable handpiece lubricant.Safe for all handpieces. Nontoxic and nonflam-mable. No need to lubricate after sterilization.Reconditions bearing cages and O-rings to staypliable. Universal aerosol.Intro KitContains: 1 - 8oz lubricant and 1 - 8oz cleanerEach ............................637-1066 1@ $129.64Cleaner Only8oz Can ......................637-1074 1@ $30.06

HANDPIECE LUBRICANTS



Handpieces

STAR DENTAL

High-Speed Handpieces

430 SW Non-Fibre Optic 262057Includes LubeFree ceramic bearingAutochuck turbine.Each...........................047-3595430 SW Lubricated Non-Fibre Optic 264951Includes lubricated ceramic bearing AutochuckTurbine. Order swivel separately.Each..............................047-1821

430K Non-Fibre Optic 2620524-line fixed back-end. Includes LubeFreeceramic bearing Autochuck turbine.Each..............................047-35534430K Lubricated 264952Includes lubricated ceramic bearingAutochuck Turbine, ISO Configuration,4-Line Fixed Connection.Each...........................047-1813

Features 10.5mm head, solid rod glass F.O.,solid titanium ceramic bearing turbines,Autochuck System, 1 port spray.Solara 263718 1-year warrantyEach............................047-2423Solara L 263791 2-year warrantyLubricated .................047-1938

430 SWL Flex 264990Includes StarBright Fibre Optics and LubeFreeceramic bearing Autochuck Turbine. Orderswivel separately.Each..............................047-1854430 SWL Flex 264993Includes StarBright Fibre Optics andlubricated ceramic bearing AutochuckTurbine. Order swivel separately.Each..............................047-1839

430 SWL 264450Includes solid glass rod fibre optics andLubeFree ceramic bearing. Autochuck Turbine.Each..............................047-2472430 SWL Lubricated 264451Includes solid glass rod fibre optics andlubricated ceramic bearing. AutochuckTurbine. Order swivel separately.Each..............................047-2480

Kaleidoscope LubeFree 264406Each...........................047-1797

Kaleidoscope Lubricated 264408Each.047-1789

LubeFree Prophy Star 3handpiece 264422The Prophy Star offers a convenient speedadjustment of 0 -4,000 rpm in both forwardand reverse directions. Includes 4 autoclavable,ergonomic rubber grips in assorted colours.Each ............................047-1771

Purple Power Lube FreeCeramic Auto-ChuckReplacement Kit 263739Fits Solara and all 430 series handpieces.Each ............................60020018 1@ $647.95

Steel Bearing Auto-ChuckReplacement Kit 260296Each ........................60010060 1@ $437.55

O-Ring Kit for Swivel(2 large, 2 small) 259884Pkg ............................60050060 1@ $22.70

Cleaning Wire 2567192/Pkg.......................60030077 1@ $12.55

Swivel Assembly 261547ISO 4-line, for use with 430 SWhandpiece.Each...........................047-2092 1@ $174.33

Swivel Assembly 261550ISO 2/3 line, for use with 430 SWhandpiece.Each...........................047-2084 1@ $84.05

Swivel Assembly 263772HiFlo Swivel Connector ISO/C 6-pin fibre optic.Each...........................047-2456 1@ $355.91

Swivel Assembly 263758HiFlo 4-hole fibre optic, for use with Solaraand 430 SWL handpieces.Each...........................047-4007 1@ $245.61

LubeFree Ceramic BearingTurbine Canister 263729(SolaraPlus, Solara FlexPlus)Each ........................60020312 1@ $591.15

Lubricated Ceramic Bearing Turbine 263968(Solara L, Solara L Flex)Each ........................60020321 1@ $647.90

High-Speed Accessories andComponents

StarBright LED Swivel 265400Cool, white light. 4000K colour temp. 70%lighter than current 6-pin swivel. 1/3 smaller.Anodized aluminum housing.Each..............................047-2670 1@ $411.86



Handpieces


Titan 3 Stainless SteelA. Titan 3 5K Motor 262261Each...........................047-3041

B. Titan 3 20K Motor 262262Each...........................047-3058

C. Torque Multiplier 258443Each...........................047-3744

D. 16:1 Contra Angle Attachment 263230Each...........................047-2399

E. Straight Nose Cone Attachment 257506Each...........................047-3728

F. Angle Adapter 264073Each...........................047-1953

G. Ball Bearing Auto Latch Angle 264182Each...........................047-3843

H. Ball Bearing Manual Latch Angle 259005Each...........................047-2191

I. Ball Bearing Friction Grip Angle 258965Each...........................047-3785J. Five Star Prophy Angle 263176Each...........................047-3777

K. LubeFree Ball Bearing Autochuck FrictionGrip Angle 264151Each...........................047-4270

L. LubeFree Ball Bearing Latch Contra-Angle262738Each...........................047-4262

M. LubeFree Five Star Prophy Angle 263240Each...........................047-4254

N. Endodontic Angle Manual Latch 262571

O. Endodontic Angle Auto Latch 262570

A

B F

E

G

H

I

J Five Star ProphyAngle 263176

MOTORS FRONT ENDS (NOSE CONES)

ANGLES

O

C

D

N

N

L

STAR DENTAL (CONT.) Low-Speed Handpieces

M

K

Titan-T TitaniumTitan-T Straight Nose Cone Attachment263942Each...........................047-1870

Titan-T 5K Motor 263940Each...........................047-1987

Titan-T 20K Motor 263941Each...........................047-1995

Swivels

Swivel, Titan Motor,Prophy Star, 2-Line 260152Each...........................047-2068

Swivel, Titan Motor,Prophy Star, 4-Line 260144Each...........................047-2050

LOW SPEED HANDPIECES

LubeFree Auto-ChuckFriction Grip Angle264151

5,000 rpm Motor Less SwivelAttachment 262261

20,0 00 rpm Motor Less SwivelAttachment 262262

Torque Multiplier 258443

Straight NoseCone 257506

Motor to AngleAdapter 264073

Ball Bearing AutoLatch Angle264182

Ball Bearing LatchContra Angle259005

Ball BearingFriction GripAngle 258965

LubeFree ProphyAngle 263240

Endodontic Angle-AutoLatch 262570

Endodontic Angle-Manual Latch262571

LubeFree ManualLatch Angle 262738

16:1 Contra AngleAttachment 263230




Handpieces

Electric Accessoriesand Components

Electric Handpieces

A. NuTorque 1:1 Straight, 263986Each ......................047-2639B. NuTorque 16:1 Autolatch Endo, 263985Each ......................047-2605C. NuTorque 1:1 Autochuck, 263984Each ......................047-2621D. NuTorque 1:5 Standard Head Friction GripAutochuck, 263982

Each ......................047-2597E. NuTorque 1:1 Friction Grip Autochuck,263981

Each ......................047-2613F. NuTorque 1:5 Mini Head Friction GripAutochuck, 263983Each ......................047-2589G. NuTorque Doriot, 1,000-40,000 rpm,Chairside trimming and hygieneprocedures includingprophylaxis, 265327

A

B

C

D

E

F

G

NuTorque Electric System265199The small system with BIG features!Control Features: Auto reverse, Auto reverse forward,Auto reverse stop

Torque control Range 0.1-3.0 with capabilities of 384 Ncm 27 (+2) possible reduction ratios Pre-sets fully customizable Flat screen easily wipes cleanEach...........................047-2571

Krypton/Halogen Lamp 2609862/Pkg ........................639-9760 1@ $132.18

SolaraPlus End Cap Wrench 263768Each ..........................658-8107 1@ $14.50

StarBright 6-Pin Fibre OpticHandpiece TubingChoose from the selection below.6' Black 265307

9' Black 265308

13' Black 265309

6' Black Coiled 265310

6' Grey 265311

9' Grey 265312

13' Grey 265313

6' Grey Coiled 265314

6' Sand 265315

Replacement Lamp 6-Pin Swivel 262522Each .................................650-9012

StarBright Fibre Optic Quadlamp control System 265330Includes 115V Power Pack and Quad-Lampcontrol. Operates up to four handpieceswith automatic light delay and adjustableillumination level. Handpiece and tubingsold separately.

Junk-Out 263790High-speed chuck cleaner.Each...........................650-8832 1@ $31.80

NuTorque Lite system 265289Features and benefits: Efficient and effective Two customizable memory presets for easeof use

Economical and ideal for GP and basic endo Push button control panel allows easyviewing and operation of all functions

NuTorque Lite Complete System containscontrol unit, electric motor, A/C adapterand tubing.

End Cap Wrench 203048

Titan 2 Latch Angle Cartridge 259009

430/VISTAManual Chuck Turbine Cartridge258661Each...........................60020054 1@ $288.05

Handpiece Lubricant 263022Used for Titan E system 8.5 fl. oz.Each...........................650-8808 1@ $47.27

DentaLube II 262539Used for Star high-speed handpieces 1 fl. oz.Each...........................650-8659 1@ $18.56



320_Section13_Handpieces_AN321_Section13_Handpieces_AN322_Section13_Handpieces_AN323_Section13_Handpieces_AN324_Section13_Handpieces_AN325_Section13_Handpieces_AN326_Section13_Handpieces_AN327_Section13_Handpieces_AN328_Section13_Handpieces_AN329_Section13_Handpieces_AN330_Section13_Handpieces_AN331_Section13_Handpieces_AN332_Section13_Handpieces_AN333_Section13_Handpieces_AN334_Section13_Handpieces_AN335_Section13_Handpieces_AN336_Section13_Handpieces_AN337_Section13_Handpieces_AN338_Section13_Handpieces_AN339_Section13_Handpieces_AN340_Section13_Handpieces_AN341_Section13_Handpieces_AN

Documents

Handpieces_320-341