Click here to load reader
Upload
suy-yoe
View
43
Download
8
Embed Size (px)
Citation preview
Handover Parameters
Handover aims to ensure communication continuity and good communication quality. Handover in WCDMA system are of the following types: soft handover, softer handover, intra-frequency hard handover, inter-frequency hard handover, inter-RAT hard handover or other types. Handover emerges as the important factor affecting network performance, and handover optimization is also significant in network optimization. Handover parameters are described according to handover classification.
. Intra-Frequency Handover Parameters The common configurable intra-frequency handover parameters are listed here.
. Inter-Frequency Handover Parameters The common configurable inter-frequency handover parameters are listed here.
. Coverage-Based Inter-RAT Handover Management Parameters the common configurable coverage-based inter-RAT handover management parameters are listed here.
. Non Coverage-Based Inter-RAT Handover Management Parameters The common configurable non-coverage-based inter-RAT handover management parameters are listed here.
. Blind Handover Management Parameters The common configurable blind handover management parameters are listed here.
. Cell Selection and Reselection the common configurable cell selection and reselection parameters are listed here.
. Neighbor Management Parameters The configurable neighbor management parameters are listed here
Intra-Frequency Handover Parameters
The common configurable intra-frequency handover parameters are listed here.
Table 1. List of intra-frequency handover parameters
Parameter ID Parameter Meaning
Default Value Relative Command Level
DivCtrlField Softer handover combination indication switch
MAY Set or Modify: SET HOCOMM
Query: LST HOCOMM
RNC
IntraFreqFilterCoef Intra-Frequency measurement
D3 For RNC RNC
Table 1. List of intra-frequency handover parameters
Parameter ID Parameter Meaning
Default Value Relative Command Level
L3 filter coefficient Set or Modify: SET
INTRAFREQHO
Query: LST INTRAFREQHO
For Cell
Set: ADD CELLINTRAFREQHO
Query: LST CELLINTRAFREQHO
Modify: MOD CELLINTRAFREQHO
Cell
Weight Weighting factor
0 dB
IntraRelThdFor1ACS
IntraRelThdFor1APS
IntraRelThdFor1BCS
IntraRelThdFor1BPS
Soft handover relative thresholds for event 1A and event 1B
1A: 6 (3 dB)
1B: 12 (6 dB)
IntraAblThdFor1FEcNo
IntraAblThdFor1FRSCP
Soft handover absolute thresholds for event 1F
EcNo: -24 dB
RSCP: -115 dBm
HystFor1A
HystFor1B
HystFor1C
HystFor1D
HystFor1F
Hysteresis related to soft handover for event 1A, 1B, 1C, 1D and 1F
1A and 1B: 0 (0 dB)
1C/1D/1F: 8 (4 dB)
TrigTime1A
TrigTime1B
TrigTime1C
TrigTime1D
TrigTime1F
Time-to-Trigger parameters related to soft handover for event 1A, 1B, 1C, 1D and 1F
1A: D320 (320 ms)
1B/1C/1D/1F: D640 (640 ms)
SHOQualmin Minimum quality threshold of soft handover
-24 dB
CellsForbidden1A
CellsSorbidden1B
Affect 1A threshold flag
AFFECT Set: ADD INTRAFREQNCELL
Query: LST
NCell
CellIndividalOffset Cell individual 0
Table 1. List of intra-frequency handover parameters
Parameter ID Parameter Meaning
Default Value Relative Command Level
offset
INTRAFREQNCELL
Modify: MOD