Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
HAND TOOLS
2
CRIMPINGTOOLS
CRIMPER 6 - 562113
Cable Cross-Section 0,25-6,0mm² (AWG 24-10)
Crimping Technic Linear
Terminal Insertion Front
Self-Adjustment Automatic
• Automatic adjustment to the wire cross-sections
• Continuous precision crimp over the full length of the ferrule
• Full cycle ratchet operation (with release) assuring a complete crimp
• Perfect fit to hand ergonomics
• Patented crimping technology
Terminal / Connector Type
Crimping Profile
3
CRIMPINGTOOLS
CRIMPER F 10 R - 562125
Cable Cross-Section 0,08-10 mm² (28-8 AWG)
Crimping Technic Linear
Terminal Insertion Side
Self-Adjustment Automatic
• Crimping of wire end ferrules with or without insulation
• High-precision crimping results
• Ergonomically designed soft handles with non-slip grip material for comfortable
working.
Terminal / Connector Type
Crimping Profile
4
CRIMPINGTOOLS
CRIMPER F 10 L - 562126
Cable Cross-Section 0,5-10 mm² (20-8 AWG)
Crimping Technic Linear
Terminal Insertion Front
• Automatic adjustment to the wire cross-sections
• High precision crimping
• Releasable ratchet ensures the complete crimping process
• Ergonomically designed soft handles with non-slip grip material for comfortable
working.
Terminal / Connector Type
Crimping Profile
5
CRIMPINGTOOLS
CRIMPER N 16 H - 562124
Cable Cross-Section 0,08-16 mm²
Crimping Technic Linear
Terminal Insertion Side
• Automatic adjustment between 0,08 - 16 mm²
• Required hand force reduced by 30%
• Hexagonal crimping
• Releasable ratchet ensures the complete crimping process
• Ergonomically designed soft handles with non-slip grip material for comfortable
working.
Terminal / Connector Type
Crimping Profile
6
CRIMPINGTOOLS
CRIMPER N 16 L - 562117
Cable Cross-Section 0,14-16,0 mm²
(26-20;18-16; 14; 12; 10; 8; 6 AWG)
• Releasable ratchet ensures the complete crimp process
• Special-designed ergonomic handles prevents slipping
• Ergonomically designed soft handles with non-slip grip material for comfortable
working.
Terminal / Connector Type
Crimping Profile
7
CRIMPINGTOOLS
CRIMPER N 50 L - 562119
Cable Cross-Section 10,0-50,0 mm² (8;6;4;2;1 AWG)
• Releasable ratchet ensures the complete crimping process
• Ergonomically designed soft handles with non-slip grip material for comfortable
working.
Terminal / Connector Type
Crimping Profile
8
CRIMPINGTOOLS
CRIMPER IT 6 S - 562120
Crimping Range Red 0,5-1,0 ( 20-18 AWG)
Blue 1,5-2,5 (16-14 AWG)
Yellow 4,0-6,0(12-10 AWG)
• Red/blue/yellow round type DIN cable lugs, pin cable lugs, female FASTON
cable lugs, male FASTON cable lugs, male terminals, cable joints
• Ergonomically designed soft handles with non-slip grip material for comfortable
working.
Terminal / Connector Type
Crimping Profile
9
• Automatic adjustment to the wire cross-sections
• High precision crimping
• Ergonomically designed soft handles with non-slip grip material for comfortable
working.
CABLESTRIPPERS
STRIPPER 6 - 562129
Cable Cross-Section 0,2 mm²-6 mm²
Terminal Insertion Front
10
CABLESTRIPPERS
STRIPPER 16 - 562114
Cable Cross-Section 0,03-16 mm²
Terminal Insertion Front
• Striping and cutting of stranded and solid wires with PVC insulation of 0,03 to 16 mm²
• Self-adjustment for all cross-sections with POWER PLUS feature
• Adjustable stripping length 3 - 21 mm
• Ergonomically designed soft handles with non-slip grip material for comfortable working.
SPARE KNIFE SET - 562127
11
CABLESTRIPPERS
STRIPPER 28 C - 562123
Cable Diameter Ø4,5 – 29 mm
• Cable stripping as lane with patented stripping mode
• Maximum performance with less effort
• High strength special steel
12
CABLECUTTING TOOLS
CUTTER 16 - 562110
Cable Cross-Section 0,03 to 70 mm²
• For burr-free cutting of standard wire cables
• Wide application range from 0,03 up to 70 mm²
• Blades with serrated edge
• Low hand force
• Soft-grips
13
CABLECUTTING TOOLS
CUTTER 32 - 562122
Cable Cross-Section Solid:max. 25/15 mm AL/CU diameter
Stranded:max. 32 mm diameter or 300 mm²
• High tempered special steel
• Locking lever
• Step-wise and burr-free cutting
• Unlocking possibility in every position
• Hand tool model
• Ergonomically designed soft handles with non-slip grip material for comfortable
working.
14
HAND TOOL SET STRIP & CRIMP SET 1 - 562128
Cable Cross-Section 0,03-16 mm²
Terminal Insertion Front
Cable Cross-Section 0,08-16 mm²
Crimping Technic Linear
Terminal Insertion Side
CRIMPER N 16 H - 562124
STRIPPER 16 - 562114
CRIMPER N 16 H - 562124
STRIPPER 16 - 562114
15
WIRING DUCTCUTTING TOOLS
RAILCUTTING TOOL
KKMR553230
KMK 1002553220
KRKM500650
• Burr-free cutting of
wiring ducts and wiring
duct covers
• Straight or 45º cutting
options
• Equal force distribution
across blades helps
homogenous cutting
• Cutting up to 100 mm
width
• 3 different cutting slots
• Clean Cut
• Lossless cutting
• Non-blunting knife
• Length adjustment
guide
• Cover cutting
• Burr-free cutting
• Non-blunting knife
• Length adjustment
guide
• Cutting up to 125 mm
width
Cutting Type Straight
Max. Width 125 mm
LengthAdjustment
100 cm
CuttingThickness
1.5 mm
CuttingCapacity
7.5x35 mm15x35 mm Tij Ø8mm
LengthAdjustment 100 cm
16
SCREWDRIVERS NON-ISOLATEDSCREWDRIVERS
Order. No. Type Description
561 010 IKT 1 2,5x75 - Flat
561 020 IKT 2 3,0x100 - Flat
561 030 IKT 3 3,5x100 - Flat
561 040 IKT 4 4,0x125 - Flat
561 050 IKT 5 5,5x150 - Flat
561 060 IKT 6 6,5x200 - Flat
Order. No. Type Description
561 110 KK 1 140 mm.
561 120 KK 2 180 mm.
Order. No. Type Description
560 010 KT1 2,5x75 - Flat
560 020 KT2 3,0x100 - Flat
560 030 KT3 3,5x100 - Flat
560 040 KT4 4,0x125 - Flat
560 050 KT5 5,5x150 - Flat
560 060 KT6 6,5x200 - Flat
ISOLATEDSCREWDRIVERS
MAINS TESTER
KLEMENSTORNAVİDALARI
17
EL ALETLERI BROSUR EN
293475616075826576000001
6.6.4.2.2.00249
Revis
ion
No:
171
1201
6
www.klemsan.com
FactoryKızılüzüm Mah. Kemalpaşa Kızılüzüm Cad. No:15 35730 Kemalpaşa - Izmir / TURKEYTel : +90 232 877 08 00Fax: +90 232 877 08 06
International Sales OfficeKızılüzüm Mah. Kemalpaşa Kızılüzüm Cad. No:15 35730 Kemalpaşa - Izmir / TURKEYTel : +90 232 877 08 00Fax: +90 232 877 08 06
OVERSEAS OFFICES
Domestic Sales OfficeMaslak Mah. Ahi Evran Cad. Ata Center İş Merkezi No: 9 Kat: 4Maslak, Sarıyer - Istanbul / TURKEY Tel : +90 212 222 52 00Fax: +90 212 222 66 55
IndonesiaGsm: +62 811 1415 14Gsm: +62 813 8282 54 54
Thailand Gsm: +66 97 239 83 10
APACRm. 1707, No. 218, Hengfeng Road, Morden Traffic Business Building, Zhabei District, Shanghai. 200070Tel : +86 21 6226 03 38Fax: +86 21 6226 39 83
South East Europe Middle East CaucasusTel: +90 530 401 94 62
Ukraine6 - 8A, Yaroslava Ivashkevicha Str.Office 7 - 8 04074, KievTel: +380 637 217 185
EuropeGsm: +48 51 666 51 41
South AfricaGround Floor Autoparks House Cross Road and 13 Park Crescemt Glenhazel High North 2182, Johannesburg, South AfricaTel: +27 84 221 33 41
GCC & India & PakistanZ Building Z 57 Saif Zone, SharjahTel : +971 6 557 37 10Gsm: +971 56 760 28 37
Colombia (LATAM)Gsm: +1 925 315 71 76
MexicoGsm: +52 55 4511 88 09