HAAS AUTOMATION INC. - xn--80aajzhcnfck0a.xn--p1aiпромкаталог.рф/PublicDocuments/05-0558-02.pdf · HAAS AUTOMATION INC. ... Haas established itself as an industry leader

Закрытое акционерное общество «АБШАНАЛП MEf АЛЛ»

пк 05- 558 _02

А/О АБАМЕТ

Тел.: (095) 232-9997, факс: (095) 232-999ЙE-mail: [email protected]:\\www.abamet.ru

R O T A R Y T A B L E S & I N D E X E R S

HAAS AUTOMATION INC.

In the Beginning...

IN1983, Haas Automation, Inc., developed the first fully programmable 5C collet indexer. Built with quality

materials, and engineered to be dependable and highly accurate, the unit was a tremendous success. By closing the gap

between cumbersome, manually operated indexers and very expensive true 4th-axis machining centers, Haas established

itself as an industry leader in automated 4th-axis parts

positioning. By assisting industry in the quest to increase

productivity through automation, Haas has become one of

America's leading builders of machine tools and

rotary tables.

After more than a decade of ongoing refinement and

development, Haas rotary products continue to dominate the

industry with quality craftsmanship, dependable operation

and affordable prices. Today, Haas has a line of more than 32

models of rotary tables and indexers that deliver the same

high quality and extremely accurate performance that is the

Haas made-in-America trademark.

The full line of Haas rotary products includes many

specialized units designed for maximum productivity. From the

multi-head HASCs to the tilting T5Cs and TRT 160 and 210

models, Haas continues to lead the way to higher

productivity through automation.

Haas rotary products are built from top-quality

materials and undergo constant re-engineering and

refinement to offer only state-of-the-art technology.

Constructed of heavy-duty materials, and designed for

dependable day-in, day-out operation, Haas rotary products are

the benchmark by which all others are measured.

Take a close look at the components that go into our rotary tables. Haas manufactures all critical components in-house at our

modern California machining facility. By controlling the machining process, we're able to deliver the kind of quality and accuracy

our customers demand.

One example of this is the indexing

accuracy of our rotary tables. At the core of

every Haas rotary table is a large-diameter,

aluminum-bronze worm gear meshing with a

ground steel-alloy worm (hardened to 60 Re)

submerged in a synthetic oil bath. The secret

to Haas' indexing accuracy is cutting the

worm gear while it's attached to the spindle,

rather than assembling the finished worm

gear to the spindle as other rotary table

manufacturers do. Each assembled spindle is

individually trammed-in on a CNC gear

hobber to a maximum 5-micron runout; then

the worm gear is precision cut.

This process provides the utmost in

concentricity between the large-diameter

ball bearings and the worm gear, ensuring

many years of smooth, extremely accurate

and bind-free operation. This is just one of

the many quality designs that go into each

and every Haas product.

О Fast Alignment - All Haas tables and

tailstocks have 0.625" alignment keys. These

keys are parallel to and centered on the

spindle. When used on Haas VMCs with their

precision T-slots, you can bolt on a rotary

product without the need to indicate

the table in.

© Main Body - Class-30 iron is used for

superior damping qualities. Extremely rigid, it

damps vibration and deflects machining forces.

Machined by Haas in only two operations on

FMS machinery.

© Turntable Platter - Haas uses only

4140 heat-treated steel alloy for our platters.

Machined in-house, they deliver superior

strength and durability. Made by Haas.

О Servo Control - The original, and still

the best control available. More than a

decade of ongoing refinement has

produced near perfection, yielding absolute

control with the most user-friendly program-

ming available. It's still the benchmark other

manufacturers have unsuccessfully tried to

copy. Designed and built by Haas.

^y Bearings - Deep-groove radial

bearings withstand loads up to 31,000 Ib.

By supporting the worm gear on both sides

with these massive bearings, Haas is able to

deliver superior performance and dependable

operation. Precision-made in the USA.

@ Worm Gear - Haas' large-diameter

aluminum-bronze worm gear is bobbed

on a CNC gear hobber and inspected on a

Klingelnberg gear analyzer. Made by Haas.

Q Worm Drive Shaft - Our drive shafts

are made of 8620 steel hardened to Re 60,

then CNC precision-ground, and inspected

to a 2-micron runout on a Klingelnberg gear

analyzer. Made by Haas.

-//MMade with pride in the USA by Haas Automation, Inc.

The Haas Servo Control

SCO1M

JB шиш the heart of all Haas rotary products is the Haas Servo

Control. Refined to near perfection by more than a decade of

т il • development, it offers the utmost in versatility, coupled with fast,

easy, flexible programming. The Haas control always incorporates the

latest in high-speed microprocessor and drive technology.

Haas' exclusive software replaces failure-prone mechanical components, and

it includes a self-diagnostic subroutine which maximizes uptime. A single

circuit board controls all main functions.

When used with any CNC machining center, the control functions as

a semi-4th axis, activated by a single M function. Easy interfacing, fast setup and

low cost make Haas the perfect alternative to cumbersome, high-priced, offshore

4th-axis machines.

Using the control's standard features, odd number bolt circles and uneven

hole spacing are easily achieved with simple programming.

You can program the control to rotate the spindle in either direction, in step

sizes from 0.001 to 999.999 degrees. There can be up to ninety-nine different

steps in memory, and each step can be repeated (or looped) up to 999 times. The

memory is non-volatile, so programs are fully retained, even when the power is

turned off. You may store up to seven separate programs. (The SCO-TRT210 stores

up to four programs.)

You can easily achieve three times the performance of a manual device with

a Haas control operating the rotary table of your choice. Add to this built-in-the-

USA Haas quality and reliability, and your decision becomes very simple. Haas has

the solutions you need.

SCO-AC

иSCO-TRT210

U—

DIM

U U

SCO2-AC

4$2~ ~ fe,

Гт~\ ПП Го1 1™

шшшш( 1 | „„ 1 п^п F l fill 1 I JLta 1 *r±l FU rgllOII-llf 1

e e ®LJ

cJ

|

В

1

ENSIONS (Inches Vlillimeters) C

A B C

SC01M 11.12 4.94 0.62

SCO-AC 11.12 6.19 0.62

SCO-TRT210 11.12 9.19 0.62

SC02-AC 11.12 9.19 0.62

• Fast, easy, flexible programming

• Simple CNC interfacing via M function

• Variable feedrates

• Linear, arc & spiral milling

• Fast setups

• High accuracy & repeatability

• Absolute or incremental programming

• Automatic circle division

• Non-volatile program storage

• RS-232 interface

• Operates on 110 to 120 VAC power

• 12-month limited warranty

• Made in the USA

The Rotary Interface

H aas rotary products can be interfaced to virtually any

type of machine. There are three distinct methods of

interfacing listed below, each with different capabilities

and limitations. Thousands of Haas rotary products have been

successfully interfaced to a very wide variety of machines over

the years. Haas Automation's Service Department can provide

expert advice on the best interface for any application.

True 4th-Axis Direct Control Via Host Machine

This method does not use the Haas Servo Control unit; instead, an

amplifier built into the host machine provides power and true multi-axis

simultaneous motion control. Almost all Haas CNC machine tools can be

fitted with additional amplifiers that work with off-the-shelf Haas rotary

products. With this method, the rotary axis is programmed and controlled

directly by the host control - just like the X, Y and

Z axes. For direct control on machines other than

Haas, some Haas rotary products can be refitted

with compatible servo motors (Fanuc™, Yasnac™,

Allen Bradley, etc.).

4th-Axis Control Via RS-232 Port

This method requires use of a Haas Servo

Control unit and a host machine capable of

sending data via an RS-232 line. All Haas CNC

machine tools can send such data to control up to

three daisy-chained Servo Controls. On Haas CNC

machines, the rotary axis is programmed directly on

the CNC control -just like the X, Y and Z axes - and

no M codes are required. All other CNC machines

require macro function capability, an external M-

code controlled relay, and an M-FIN connection.

Programming is still done at the CNC control;

however, it is in the form of macros, and M codes

are required for synchronization.

Semi 4th-Axis Control Via

CNC Interface Cable

This method requires use of a Haas Servo

Control unit and a host machine capable of

closing a relay (or switch). Most CNC machine tools

are equipped with spare M codes, which can be used

to close a relay. Indexing commands are stored only

in the Servo Control's program memory. Each pulse of the host machine's

relay triggers the Servo Control to index to its next programmed position.

After finishing the index, the Servo Control signals that it has finished

and is ready for the next pulse. Fully-synchronized multi-axis motions

cannot be performed with this method. This method can be used with

machine tools that have no controls.

NOTES

Servo Controller can also be interfaced to PLC units and computers for

general-purpose use. Please contact Haas Automation for details.

*The term "4TH AXIS" is used as a general description. Unit may

operate as any axis depending on host machine.

Diagram of Control Indexer Interface

YOUR CNC MILL

4 PIN DIN CONNECTOR HAAS HA5C INTERNAL

REAR OF CONTROLLER

4th-axis ordering information

When ordering any Haas rotary table or indexer for use on a Haas

machining center, you do not need a servo control unit. We do, however,

suggest you get the control unit so you can use your rotary table on other

machines. Please discuss with your dealer the make and model of the CNC

machine you intend to use your new rotary table with before placing an order.

Now available — true 4th-axis custom motor configurations

Haas rotary products can now be ordered with various motor configurations.

This option allows a Haas rotary table to be used as a true 4th axis on many

CNC machining centers other than Haas VMCs. In order to properly set up a

Haas rotary table with an optional motor, you will have to supply detailed

information about the interfacing machine. Please call your dealer for details,

or contact Haas directly at 800-331-6746.

Brushless Motor Technology

• Higher overall speeds• Faster acceleration• Faster deceleration• Greater power and torque• Less heat generation• Higher duty cycle• Greater reliability• Reduced cycle times• Higher output• Bigger profits

Important NoteMost Haas rotary products are still

available with our shop-proven and

economical brush-type DC servo

motors for use with Haas CNC

machines furnished with standard

brush motors and drives.

Most Haas rotary tables are now available with

brushless servo motor technology. These highly

reliable, high-performance servo drives provide

greater torque for heavy operations, and yield higher

acceleration/deceleration rates to reduce cycle times.

With no brushes to wear and generate dust, motor

maintenance is reduced and reliability is substantially

increased. And, since the heat-producing windings are

attached to the outer shell, these motors run cooler, are more

compact and have a longer life than brush-type motors. Haas

brushless rotary tables are currently available in most models.

Contact Haas or an authorized Haas distributor for

further information.

Keep in mind, brushless rotary tables will work

seamlessly with any new Haas CNC machining center that also

utilizes brushless servo motor technology. For Haas machines

furnished with standard brush motors, or other

manufacturers' CNC equipment, you can utilize Haas brushless

rotary technology by using a Haas brushless servo control unit

(see previous page) with your new brushless rotary table.

HRT160SP not available as brushless configuration.

АП New Indexing Technology

Brushless technology prowides higher speeds& a more compact housing.

'Pact Size

For small parts machining, high-speed drill &

tap operations or repetitive parts where fast

cycle times are important, the new Haas

HA5CSB super-high-speed collet indexer is the

perfect solution. This compact

indexer features a powerful

brushless servo motor and 33:1

gear ratio to provide feedrates

up to 800°/second for reduced cycle times and high-

speed production. That's three times faster than the

standard HA5C.

All Haas brushless 5C collet indexers, including the newsuper-high-speed HA5CSB above, are now 30% shorter thanour standard brush-drive 5Cs - and they provide more power.

Super-High-SpeedSC Collet Indejcer

The new Haas HA5CSB collet indexer reduces

cycle times and positions parts at 800°/second.

• High-torque brushless servo

•800°/second feedrates

• Simple bolt-on mounting

• Reduces cycle times

• Speeds drill & tap operations

• High-speed engraving

HA5C SB

Torque (ft-lb) [N

Runout Max (in) (mm)

Backlash (arc-sec)

Speeds (°/sec)

Collets (in) (mm)

Nose Thread (in)

Center Height (in) (mm)

20

0.0004 0,01

40

0.001 to 800

std5C(V64-1Vi6) s t d 5 C ( 0 , 4 t o 2

23/i6-10

4.000 ±0.001 101, 6 ±0,025

INDEXING1

Accuracy (arc-sec)

Repeatability (arc-sec)

Resolution (°)

Max Rotation/Step (°)

Worm Gear Diameter (in) (mm)

±30

10

0.001

999.999

2.75 70

MOTOR

Type (hp AC servo) !k\

Gear Ratio (worm & gear)

0.75

33:1

- £-\J 1 1 I »_l O|-M[IVJI

HA5C Series

ID. Part*

A. HA5CSB

t* L\J 1 V|UCf

Description

Super-High-Speed Servo Indexer

w/Manual Handle Collet Closer

Duty Cycle*

Operating Temp, (max ambient)

Power Required (VAC)

Max Air Pressure (psi)(air collets)

WEIGHT

Rotary Head (Ib)

Brushless Control (Ib) (kg)

75% @ full speed

100°F

1 1 5 ±5% @ 1 0 amps

120

48

14.2 6,4

Specifications and Dimensions are like HA5C brushless (See page 8)

"Without tailstock. 'See page 38.Due to continual development, all machine specifications are subject to change.

НА5С Series

T he Haas HA5C series is the ideal choice

for holding smaller parts. Clamp your

parts using standard 5C collets, or chuck

them by threading a 3-jaw chuck to the 23Лб-10"

spindle nose. Collets can be closed with

your choice of a manual handle or an

optional air collet closer.

The HA5C series is easy to program, interface and set up. Haas' own precision

in-house manufacturing and machining processes ensure high quality and years

of dependable operation. With more than a decade of refinement, the Haas

HA5C is the industry benchmark for quality, accuracy and dependability.

High-Productivity Multi-Spindle Indexers

By spacing the heads as close together as possible, Haas

is able to obtain the most cost-effective multi-spindle

designs on the market today. In higher-volume applications,

loading multiple parts saves tool changing and rapid-movement

times, allowing your machine to run longer between part

loadings. Together, these time savings add

up to substantially increased profits.

HA5C Series

ID. Part*

A. HA5C

DescriptionServo Indexer

w/Manual Handle Collet Closer

Uses standard 5C collets,step chucks and closers

1 Threaded spindle nose for chucks1 Coolant-resistant polyurethane

conduit & seals1 Fast, easy, flexible programming1 Simple CNC interfacing via M function

Variable feedrates


• Fast setups

• Accurate and repeatable


• Made in the USA

B. HA5C 21* Dual-Spindle Servo 5C System

C. НА5С 3HD1* Triple-Spindle Servo 5C System

D. HA5C4HD1* Quad-Spindle Servo 5C System

'Air Collet Closer not included (see pages 32-33)

*Note: Multi-Head Indexers are not designed to be used withspindles in the vertical position.

Specifications and Dimensions

HA5C Single Spindle

/Note: Carry-handle omittedfrom front view

D, Di

LOCATING PINS on base:00.6250" (±0.001") x 0.35" deep

15,875 mm (+0,025 mm)x8,89 mm deep

14'4,3m/ Cable

DIMENSIONS (Inches Millimeters)

A 7.80 J 3.0000 ±0.0003 76,20+0,00762В 7.38 К 5.47С 2.62 L 3.25DDi17.12 15.32 434,85389,12 M 0.750±0.002 19,05±0,051E 7.00 N 3.0000 ±0.0003 76,20 ±0,007 62F 2.12 P 1.750 ±0.001 44,45 ±0,0254G 0.520/0.530 TYP 13,21/13,46 TYP Q 4.000±0.001 101,60±0,0254H 7.93 201,42 |0i = Brushless Models)

HA5C-*

Т 1 -M

D

t ' t

:-р-Т,(Г

[l I ^фсо" ApllNuL , ~~7~~

Ньг]-1

'

DIMENSIONS (inches

HA5C2

Two, Three & FourF

„(I =DУ W Ч Y ^)~^

^P "ЙН

HA5CA Ai 6.24 4.45 158,50 113,03 9.10 7.27

„nРЧЧП

£,

GH-! -

3

Spindle

n -

I Щ| ^>\ 11 t- L 4 -J U-

"" N ^*~-• Q »

R — — K,-,

= - Пн1в№SH

•

— M

HA5C4231,14 184,66 9.10 7.27

В 81 18.6216.62 472,95 422,15 26.4824.65 672,59 626,11 31.4829.65С 11 10 281,94D 10.18E 9.25

11.1010.189.25

281,94258,57234,95

11.1010.189.25

F 5.000+0.002 127,00 ±0,051 5.000 ±0.002 127,00 ±0,051 5.000 ±0.002G 0.68 TYP 17,27 TYPH 3.88

• 0.68 TYP3.88

17,27 TYP98,55-

0.68 TYP3.88

231,14 184,66799,59 753,11281,94258,57234,95127,00 ±0,05117,27 TYP98,55

J 5.875 ±0.002 149,23 ±0,051 5.875 ±0.002 149,23 ±0,051 5.875 ±0.002 149,23+0,051К 0.70 17,78L 0.75 19,05M 0.53 13,46N 2.75P 7.93Q 5.50 139,70R

AC-25 7.93 201,42AC-100 14.75 374,65AC-125 9.29

0.700.750.532.757.935.50

7.9314.759.29

17,7819,0513,4669,85201,42139,70

201,42374,65235,97

0.700.750.532.757.935.50

7.9314.759.29

17,7819,0513,4669,85201,42139,70

201,42374,65235,97

(Ai, Bi = Brushless Models)

This HA5C is being used for a simple, point-to-point positioning

application. Used in this way, there are 360,000 different

programmable positions. A program can contain up to 99

different steps and each of these steps can be repeated up to

999 times.

D.

Air Collet Closer not included (see pages 32-33).

HA5C HA5C2 HA5C 3*

HA5C 4*

SPINDLE | |

Torque (ft-lb) (Nm)

Brushless (ft-lb) (Nm)


Backlash (arc-sec)

Speeds (°/sec)

Collets (in) (mm)

Nose Thread (in)


45 61

60 81

0.0004 0,01

40

0.001 to 270

std 5C (Ум -Т/к) std 5C (0,4 to 27)

23/16-10

4.000 ±0.001 101,6 ±0,0254

20 2/ (per spindle)

25 34

0.0004 0,01

50

0.001 to 200

std5C('/64-1Vi6) std 5C (0,4 to 27)

23/i6-10

5.875 ±0.002 149,2 ±0,051

20 i (per spindle)

25 34

0.0004 0,01

50

0.001 to 200

std5C(V64-1Vi6) std 5C (0,4 to 27)

23/i6-10

5.875 ±0.002 149,2 ±0,051

INDEXING1

Accuracy (arc-sec)


Resolution (°)



±30

10

0.001

999.999

2.8 71,1

±60

10

0.001

999.999

2.8 71,1

±60

10

0.001

999.999

2.8 71,1

MOTOR

Type (hp DC servo) (kW DC servo]

Brushless (hp AC servo) (kW AC servo)


0.5 0,4

0.75 0,6

60:1

0.5 0,4

0.75 0,6

60:1

^ ^ ^ ^ ^ ^ ^ • ^ • ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^M

1.5 1,1

1.0 0,7

60:1

OPERATING SPECIFICATIONS

Duty Cycle"



Max Air Pressure (psi) (bar)

75% @ full speed

100°F 38°C

1 15 ±5% @ 10 amps

120 8,3

75% ©full speed

100°F 38°C

1 15 ±5% @ 10 amps

120 8,3

75% ©full speed

100°F 38°C

1 15 ±5% @ 15 amps

120 8,3

WEIGHT

Rotary Head (Ib) (kg)

Control (lb)|kg)

Brushless Control (lb)(kg)

48 21,8

13 5,9

14.2 6,4

120 54,4

13 5,9

14.2 6,4

168 (3HD) 250 (4HD)76,2 (3HD) 113,4 (4HD)

13 5,9

14.2 6,4

* Not for use with tailstocks. "Without tailstock. 'See page 38.Due to continual development, all machine specifications are subject to change.

HRT Series

For holding medium to large parts or

fixtures, the Haas HRT series of

horizontal/vertical T-slotted rotary

tables is the answer. Available in five

different sizes ranging from 6.3" to 23.6",

these rugged heavy-duty tables can hold

parts and fixtures up to 1,475 pounds.

Chucks and fixtures can be easily bolted to

the table using the six machined T-slots. The

large thru-holes allow for bar feeding and

special fixture locating requirements.

E.


• Mount horizontally or vertically

• Heavy-duty design

• Large thru-holes

• Coolant-resistant polyurethane

conduit & seals





• Fast setups



• Made in the USA

HRT Series

ID. Part* Description

A. HRT 1 60 1 60 mm (6.3") Servo Rotary Table

w/Pneumatic Brake

B. HRT 210 21 Omm (8.27") Servo Rotary Table

w/Pneumatic Brake

C. HRT 310 31 Omm (12.2") Servo Rotary Table

w/Pneumatic Brake

D. HRT 450 450 mm (17.7") Servo Rotary Table

w/Hydraulic Brake

E. HRT 600 600 mm (23.6") Servo Rotary Table

w/Hydraulic Brake


HRT 160AВСDDiEF

GH0

6.30 160

1.50 38,105.50 139,7016.20 411,4816.20 411,483.63 92,205.000 127,00±0.001 ±0,02544.500 114,301.500 38,10+0.0005, -0+0,0127, -0

JКLMNPQ

1.15 29,218.64 219,461.50 38,100.63 16,003.50 88,903.50 88,901.75 44,45

HRT 2108.27 2101.75 44,455.84 148,3420.00 508,0017.80 452,124.63 117,606.000 152,40±0.001 ±0,02545.250 133,352.000 50,80+0.0005, -0+0,0127, -00.63 16,0010.64 270,261.50 38,100.63 16,004.25 107,954.50 114,301 .75 44,45

(Di = Brushless Models)

1

1

С

^G—

J h

*

•/— YXJJ

*B

I

1 I'\

Ê

^3ш>%

Y5^(— n:J-—I — *— '•

/ 0.531

HRT 310 HRT 45012.202.007.8224.3022.806.889.000±0.0017.8753.250

17.72 45050,80 2.25 57,15198,63 9.00 228,60617,22" 28.55 725,17579,12 28.55 725,17

9.25 234,9511.500 292,10

±0,0254 ±0.001 ±0,0254200,03 9.00 228,6082,55 7.500 190,50

+0.0005, -0 +0.001, -0+0,0127. -0 +0,0254, -00.0815.902.001.006.806.751.75

0.00 0,0020.62 523,75

50,80 2.25 57,151.13 28,70

172,72 7.90 200,66171,45 9.125 231,78

1.75 44,45

HRT 60023.62 6002.50 63,509.0034.82 884,4334.82 884,4312.134 308,2014.500 368,30±0.001 ±0,02549.000 228,7.500 190,+0.001, -0+0,0254, -00.00 0,0026.62 676,2.25 57,11.13 28,77.90 200,12.00 304,1.75 44,4

6050

155

D

D ili », LJ1

(o)

g^-4Шwт — L" wide x 0.5

|

\

^ftjljl1 &j£m¥//Мжг*:э

~* u0"deeo '

A

^C —

| |• • •

c "•

с

I / 13,46mm wide x 12.70 mm deeoFront & Rear Tie-Down Slots

i

N

t

U^

I

1

J

The HRT 310, shown here with a pillow block support, is being

used to reach multiple sides and angles on an engine block. This

entire machining operation, which may utilize up to 20 tools,

can be completed at one time. Eliminating multiple setups, tool

changes and extra handling by the operator is one of the

easiest and fastest ways to boost productivity.

Using standard T-nuts

Locating Key

on base:

0.6245" wide 15,862 mm

(+0, -0.001 ")0,025 4 mm

by

0.225" deep 5,72 mm

Minimum Dia.

Bolt Circle:

HRT 160-3.92" 99,57 mm

HRT 210-4.37" 111,00mm

HRT 310-6.00" 152,40 mm

HRT 450-9.84" 249,94 mm

HRT 600 - 9.84" 249,94 mm

А.

SPINDLE

Torque (ft-lb)(Nm)

Brushless (ft-lb)(Nm)


Backlash (arc-sec)

Speeds (7sec)

Tooling


Brake Torque (ft-lb®ioopsi(Mm (86,9 bar

INDEXING1

HRT 160 HRT 210

•••100 136

150 203

0.0005 0,0127

30 •

0.001 to 80

6 std T-slots @ 60°

5.000+0.001 127 ±0,025 4

100 136 200 271

HRT 310 HRT 450 HRT 600

тиш^швт210 21

210 285

0.0005 0,0127

30

0.001 to 60

6 std T-siots @ 60°

200 271

300 407

0.001 0,0254

30

0.001 to 50


325

400 542

0.0015 0,0381

30

0.001 to 40


380 515

450 610

0.0015 0,0381

30

0.001 to 40


6.000 +0.001 152,4 ±0,025 4 9.000 ±0.001 228,6 +0,025 4 11.500 ±0.001 292,1 ±0,025 4 14.500 ±0.001 368,3 ±0,025 4

500 678 1,800 2440 1,800 2440

Accuracy (arc-sec)


Resolution (°)



±15

10

0.001

999.999

4.7 119,4

±15

10

0.001

999.999

6.3 160,0

±15

10

0.001

999.999

9.4 238,8 '

±15

10

0.001

999.999

13.5 342,9

±15

10

0.001

999.999

13.5 342,9

MOTOR

Type (hp DC servo) (kW DC servo)



Timing Belt

0.5 0,4

1.0 0,7

63:1

2:1

1.5 1,1

1.0 0,7

90:1

2:1

1.5 1,1

3.0 2,2

72:1

2:1

1.5

3.0 2,2

72:1

3:1

1.5 1,1

3.0 2,2

72:1

3.5:1


Duty Cycle full/low speed

Operating Temp. (max. ambient)


Max Air Pressure (psi)lbar)

50% /100%

100°F 38°C

1 1 5 ± 1 5 % @ 1 5 A

120 8,3

50% /100%

100°F 38°C

115±15%@15A

120 8,3

50% /100%

100°F 38°C

115 ±15% О 15 A

120 8,3

50% /100%

100°F 38°C

1 15 ±15% @ 15 A

120

50% /100%

100°F 38°C

115±15%@15A

120

WEIGHT^^••••••••«••••••••« •^^ •IHHHI

Table (Ib)

Control (lb)(kg)


90

13 5,

14.2 6,4

165

13 5,9

14.2 6,4

435

13

14.2 6,4

850

13

14.2

1,475

13

14.2

Due to continual development, all machine specifications are subject to change.

HRT SP Series

HRT160/210/310 SP - The

HRT SP Series gives you

the same features and

benefits as the standard HRT series, but with

the motor wrapped behind the table to give a

substantially shorter overall length and help

you fit a lot of table into a small work envelope.

(Available with Al-6 platter on the HRT

210SP, and Al-5 platter on the HRT 160SP, for

a slight additional cost.)


• Large thru-holes


conduit & seals





• Fast setups



• Made in the USA

HRT SP Series


A. HRT 160SP 160mm (6.30") Servo Rotary Tablew/Motor in Back

B. HRT210SP 21 Omm (8.27") Servo Rotary Tablew/Motor in Back

C. HRT310SP 31 Omm (12.20") Servo Rotary Tablew/Motor in Back


T-slot detail

DIMENSIONS(Inches Millimeters)

0.56214,275

0.970/0.93024,638/23,622

0.390/0.3609,906/9,144

0.375

9,525

- 1 4 ' 4 , 3 mCable

—G-*•] [•*- 0.530" wide x 0.50"deep

13,46 mm wide x 12,70 mm deepFront & Rear Tie-Down Slots


HRT 160SPA 10.80

В 12.25

С 10.39

D 8.63E 5.000+0.001 127,00 ±0,025 4

F 3.63G0xdp1.500x6.00 38,10x152,40

HRT 210SP12.28 311,91

13.77

12.39 314,71

10.64

6.000 ±0.001 152,40 ±0,025 4

4.63 117,602.000x7.00 50,80x177,80

HRT310SP16.26 413,00

17.80

17.60 447,04

15.90 403,86

9.000+0.001 228,60 ±0,025 4

6.883.25 x 9.875 82,55 x 250,825

Complex shapes and multi-angle cutting tasks are no problem

with Haas on your side, and now neither are work

space or multi-fixturing. When you need more room, look to the

HRT SP series of Haas rotary tables, which take up less

work-envelope area.

HRT 160SP HRT 210SP

SPINDLE

Torque (ft-lbb'Nm)



Backlash (arc-sec)

Speeds (%ec)

Tooling


Brake Torque (ft-lb@ioopsi)(Mm @6,9bar) '

100N/A

0.0005 0,0127

30

0.001 to 80 '6 std T-slots @ 60°

5.000 ±0.001 127+0,0254

100 136

210 285210 285

0.0005 0,0127

30

0.001 to 60


6.000 ±0.001 152,4 ±0,025 4

200 271

INDEXING1

Accuracy (arc-sec)


Resolution (°)


Worm Gear Diameter (in)

±1510

0.001

999.999

4.70 119,4

±15

10

0.001

999.999

6.30

MOTOR

Type (hp DC servo) (kW'OC

Brushless (hp AC servo) ikW AC S(


Timing Belt

и|_ _1 _ 1 1 н В1М _|а.|| вш_|__ _> ___|___||н__ _||___

0.5 0,

N/A

63:1

2:1

1.51.0

90:12:1





Max Air Pressure (psijfhr

50% /100%100°F

115 ±15% @ 15 amps

120

50% /100%100°F

115±15%@15amps

120

WEIGHT

Table (Ib)

Control (Ib)

Brushless Control (Ib) !!•••. I

Я^^^^^ЯНт^^тятЯЯттвтнттЯЩНЯт^тттттттат

90

13

N/A

ЯЯЯЯЯтЯЯтЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯЯтЯЯЯЯЯЯЯМЯЯЯЯЯЯЯЯЯЯЯЯтПвтШтЯт^^тв^т

165

13

14.2 6,4

HRT 310SP

•••200 271300 407

0.001 0,0254

30

0.001 to 50

В std T-slots @ 60°

9.000 ±0.001 228,6 ±0,025 4

500 678

±15

10

0.001999.999

9.40 2:

1.53.0

72:1

2:1

50%/100%

100°F

115 ±15% @ 15 amps

120

435

13 5,

14.2 6,4

'See page 38.Due to continual development, all machine specifications are subject to change.

HRT Super High Speed Series

HRT210SHS - For small to medium parts,

Haas has now boosted productivity

with even quicker cycle times. Nearly

six times faster than the standard HRT 210, the 210SHS

(Super-High-Speed) greatly increases productivity with rapids

to 360 degrees per second and feedrates to 270 degrees per

second. In addition to the increased speed, the new HRT

210SHS is compact like our SP series. So if your job requires

several indexes, or if your application has limited work space,

this new table is ideal for your application.


• Harmonic drive gear design

• Compact enclosure

• Brushless servo motor technology


conduit & seals





• Fast setups



• Made in the USA

HRT Super High Speed Series


A. HRT 21OSHS 210 mm (8.27") Servo Rotary Table w/

Harmonic Gear Drive & Motor in Back

—| |— 0.530" wide x 0.50" deep13,46 mm wide X 12,70 mm deepFront & Rear Tie-Down Slots

..— К —J Minimum Dia. Bolt Circle: 5.65" H3.51

ч DIMENSIONS (Inches Millimeters)

AВСD

12.604.6310.646.00 ±0.001

320,04

117,60

270,26152,40 ±0,025 4

E 0 2.000 x 1.20 deep ±0.001 50,8 x 30,48 deep ±0,025 4

+0.000__ -0.001 0,0254mm

0.625" wide x 0.225" dei15,875 mm wide x 5,7 nLocating Key

FGHJКL

12.381.758.271.57 Wrench Access4.504.25

314,4544,45210,06

114,30107,95

HRT210SHS-HD

SPINDLE^ •ЁЯШИИИ ИВИ И ^ И ВШИ ИИИРИИ»™ ^

Torque (ft-lb)(Nm)Runout Max (in) (mm)Speeds, Feed (°/sec)

Speeds, Rapid (°/sec)ToolingCenter Height (in) (mm)Max Part Capacity (lb)(kg)

200 271

0.0005 0,01270.001 to 270

0.001 to 360

8 std T-slots @ 45°6.000 ±0.001 152,4 ±0,025 450 22,68

INDEXING1

^••••••••••••вр ивя^ ииииииии™"™»

Accuracy (arc-sec)Repeatability (arc-sec)Resolution (°)Max Rotation/Step (°)Drive

±30

10

0.001

999.999Harmonic

MOTORBrushless AC servo (hp)(kW)Gear Ratio

OPERATING SPECIFICATIONSDuty Cycle full/low speedOperating Temp, (max ambient)Power Required (VAC)

WEIGHTRotary Head (lb)(kg)Brushless Control (lb)(l<g|*

50%/100%100°F 38°C115 ±15% @ 15 amps

165 74,814.2 6,4

'See page 38. 'Available in brushless drive only.Due to continual development, all machine specifications are subject to change.

SC Series: Motion Control

Haas Single-Axis Motion Controls provide a low-cost method to

automate your machine shop. Easy to use and simple to interface, each

single-axis motion control combines a powerful servo motor with the

versatile Haas Servo Control. These units can be used to control a single

linear or rotary axis for such applications as rotary grinders, surface grinders,

cross-slide tables, inspection machines and much more.

HRT SC Series

ID.A.

Part*SC 4.01

SC 4.0/SC 5.0

The Haas programmable single-axis control features

a DC servo motor with speeds up to 3,000 rpm and a built-in,

high-speed RS-232 port.

• Low cost

• Linear & rotary axis control

• Speeds up to 3,000 rpm

Continuous torqueSC 4.0: 350 oz-in (2,5 Nm)SC 5.0: 576 oz-in (4,1 Nm)

Peak torqueSC4.0: 1,440 oz-in (10,2 Nm)SC 5.0: 3,000 oz-in (21,2 Nm)

Programmable parameters

• RS-232 port for fastuploading and downloadingof programs

1 Easy to interface and use

Simple to interface to otherequipment


p

x(MAX)

^ n

S

илтЧ

^

H

и U

J—


AВСnEFGHJКL

SC44.00

0 SC 5.0

--K-H

lгL

ATYP.

- — СTYP

( )

s — л( ^ ^V у

o v у

/- В TYP.

®

V4 X D

CONTROL DIMENSIONS

SC 4.0101,60 4.00 101,60 Width 11.12 282,45

R 0.1875 4,763 R 0.18753.406

Height 494 125,483.406 Depth 12.75

0.340 Thru 8,636 0.390 Thru8.932.874.200.450.15

12.20 SC 5.0

287 Width 1112

7 25 Height 4 94

11 0.45 11,43 DeP'h 12.75

0.151.69 ±0.03 '2,93 ± 1.69 ±0.030.6243 0.6243

2,93 ±0,76

B. SC 5.0

C. SC 9.0

'Not Shown

DescriptionSingle-Axis Motion ControlPeak torque 1,440 oz-in (10,2 Nm)

Single-Axis Motion ControlPeak torque 3,000 oz-in (21,2 Nm)

Single-Axis Motion ControlPeak torque 1,952 oz-in (13,8 Nm)

SC 9.0

This new programmable single-axis control features a

powerful AC brushless servo motor with speeds up to 3,000 rpm.

Low cost

Linear & rotary axis control

Speeds up to 3,000 rpm

Continuous torque 768 oz-in(5,4 Nm)

Peak torque 1,952 oz-in(13,8 Nm)

8,192-line encoder feedback

Programmable parameters

RS-232 port for fastuploading

Easy to interface and use1 Simple to interface to other

equipment


h. — — K —

I- J

i 1

ГH

1

1 1 \ \

"

-~

Л

»-

»-

1

HJ•-

-1!

UE•*- D

С и-

p I

т —гг N

J

I 1ffV""""

V


A 8.62В 6.34С 2.28D 0.47E 0.24F 0.75

КLMN

5.515.124.044.29

ixC

\Г1

\

139,95

130,05

102,61

108,97

'y

CONTROL DIMENSIONSG 4.33H 3.46J 3.46

WidthHeightDepth

11.126.1912.75

157,23

323,85

HRT Dual Table Series

160-2 &

HRT 210-2 -

Double yourHRTproduction with our HRT 160-2 and

HRT 210-2 dual platter models. The

HRT 160-2 provides two spindles

with 6.30" platters on 10" centers,

and the HRT 210-2 provides two

spindles with 8.27" diameter

platters on 12" centers. Both

models yield maximum productivity

in minimal space.

Also available in SP style,and with Al-6 and Al-5 platters,

for an additional cost.




conduit & seals






• Made in the USA

HRT Dual Table Series

ID. Part# Description

A. HRT 160-2* Dual-Spindle Servo RotaryTable, 10" (254 mm) Center Distance

B. HRT 210-2* Dual-Spindle Servo RotaryTable, 12" (304,8 mm) Center Distance

*Note: Dual-table rotaries are not designed to be used withspindles in the vertical position.


HRT 160-2A Ai 26.10 26.10 662,94 662,94В 10.000 ±0.001 254,00 ±0,025 4С 6.00D 6.750 ±0.002 171,45 ±0,051E 4.50F 19.63G 0.88H 0.053J 1.25К 1 75

114,30

498,60

22,35

1,35

31,754445

(Ai = Brushless Models)

_м Г _

.о о

оо

°лл°о ^-— -^ о

1 1ц

V-

1

р

1„ *

t

с

p

[

J

(S)_х 5<3[1Е>:Чч

/ Plr \ШоШ^ 3_fc^1 Jjnil 1 1

*J

HRT 2 10-231.80 30.30 807,72 769,6212.000+0.001 304,80 ±0,025 47.007.750 ±0.002 196,85+0,0515.2523.630.880.0531.251 75

A Ai

П to.

V-V n

st^-if::^

/ ^й^ ^х(ШЙ^ыШ)

^^^L^^î i l

•n1

к

1' "i/7

ШАА

IADE IN USA

i „

A closeup view of an impeller-type machiningprocess utilizing simultaneous 4th-axis machiningwith a Haas HRT 210-2. These dual-platter rotarytables can boost your productivity considerably.

A. B.

HRT 160-2 HRT 210-2

SPINDLE

Torque (ft-lb)'N

Brushless (ft-lbl(Nm)

Runout Max (in) (mini

Backlash (arc-sec)

Speeds (°/sec)

Tooling


Brake Torque (ft- lb@ioopsi) (Nrn ee.gbar)

75 102

110 149

0.0005 0,0127

300.001 to 80


6.750 ±0.001 171, 5 ±0,0254

100 136

170 230

170 230

0.0005 0,0127

30

0.001 to 60


7.750+0.001 197 ±0,025 4

200 271

INDEXING1 |

Accuracy (arc-sec)


Resolution (°)


Worm Gear Diameter (in)lmm)

±15100.001

999.999

4.70 119,4

±15100.001

999.999

6.30 160,0

MOTOR |




Timing Belt

0.5 0,4

1 0,7

63:1

2:1

1.5 1,1

1 0,7

90:1

2:1

OPERATING SPECIFICATIONS | |




Max Air Pressure (psi)(bar)

50% /100%

100°F 38°C

115±15%@15amps

120 8,3

50% /100%

100°F 38°C

115±15%@15amps

120 8,3

WEIGHT

Table (lb)(kg)

Control (Ib) (kg)


210 95,3

13 5,9

14.2 6,4

355 161

13 5,9

14.2 6,4


HRT A Series

HRTA6 & HRT A5 -

If versatility in

workholding is

important to you, the Haas HRT series of

Al-6 and Al-5 spindle rotary tables is

the way to go. Chucks, faceplates and

collet chucks can easily be mounted to a

standard Al spindle nose. For the

HRT A6, Haas offers an 8" 3-jaw chuck

(LC8A6-B) with an adjust-true feature,

as well as 8" or 11" plain faceplates

(FP-8, FP-11) for making your own

fixtures. For small parts, we have a 5C

collet chuck (A65C) and 16C collet

chuck (A616C) that work with the A6AC

draw bar. With this optional pneumatic

draw bar assembly (see page 33, item D)

on the HRT A6, collets can be closed

with the flip of a switch. 3J collet

chucks are available from your local

tooling supplier.

• Versatile workholding options

• Large thru holes


conduit & seals

• Pneumatic draw bar option (A1-6 model)





• Fast setups



• Made in the USA

KRT A Series

ID. Part*

A. HRT A6

B. HRTA51

DescriptionRotary Table

w/A1-6 Spindle Nose

Rotary Table

W/A1-5 Spindle Nose


1

_ 6 — — — —

С

. Л „о о

лwО

., Y

0V_y0

— ^D

J-

R

1

F

-

II

Е

/-"

//•2

\ \*Ч»\ N* 1

©

J-\\

&)}

( ! 1 h

1DIMENSIONS (inches

L-L

M

1

1

n r/jK7твЯЕ т imr M A

5ж5MADE IM USA

> I

^ H

I

с — —

[— ]о о о

о о

о о

о о о

Millimeters)

HRT A5 160 mm (6.30")A A5 SpindleВ 2.00С 5.50

50,80

139,70

DDi 16.20 16.20 411E 3.63

,48 411,4

92,20

HRT A6 21 Omm (8.27")A6 Spindle2.25 57,155.84 148,3420.00 17.80 508,004.63 117,60

452,12

F 5.000 ±0.001 127,00 ±0,025 4 6.000 ±0.001 152,40+0,0254G 4.50H0j 1

5015

К 8.64L 0.53M 1 75

114,30

38, 10

29,21

219,46

13,46

44,45

5.25 133,352.03 51,560.63 16,0010.64 270,260.53 13,461.75 44,45

(D = Brushless Models)

'Draw tube not available.

'Accessories for the HRT A5 available from your tooling supplier.

Locating Key on base of all models:

0.6245" wide (+0, -0.001") x 0.225" deep15,862 mm wide (+0, -0,025 4 mm) x 5,715 mm deep

A65C-5C Collet Adapters

3J Collet Adapters(Available from your tooling supplier)

A616C-16C Collet Adapters(Available from your tooling supplier)

FP8 or FP11 - 8" (203,2 mm) or 11" (279,4 mm) Faceplates

LC8A6-B - 8" (203,2 mm). 3-Jaw Manual Chuck

This high-productivity application utilizing a custom, multi-part

fixture and Haas tailstock increased output by more than 500%.

This is just one example of how a Haas rotary table can increase

your productivity and help you make more money in less time.

Available in SP models; see page 12.

SPINDLE

HRTA5 HRTA6

Torque (ft-lb)(Nm)



Backlash (arc-sec)

Speeds (°/sec)

Tooling


Brake Torque (ft-lb eioopsi) (Nm @б,эьаг)

100 136

150 203

0.0005 0,0127

30

0.001 to 80

A1-5 Spindle on HRTA5

5.000 ±0.001 127+0,0254

100 136

^ ^ ^ MaB ^ _H_B _^ _^ MM ______B__fl__^ ^ _MMIH H HHH

210 285

210 285

0.0005 0,0127

30

0.001 to 60

A1 -6 Spindle on HRTA6

6.000 ±0.001 152,4 ±0,025 4

200 271

_н_ймн__1_в ^ ^ _ _|м_|и _1__НМ1^ в й|мн||. _м__а|м__ймйм _н ^ __ _

INDEXING1 1 |

Accuracy (arc-sec)


Resolution (°)



^ ^ i i p BII_ __ __IHBH. ^ ^ ^ ^ ^ ^ ^ ^ _._IIIM BBIBI>B_i i

±15

10

0.001

999.999

4.70 119,4

__|н_^ ^ ^__^ _^_м_М1^ ^ ^__^__^ ^ а__иви нп

±15

10

0.001

999.999

6.30 160,0

НВВ__|В ^ ^ _Ш_ИН ___1 _.И>ВМ|НШ1 _ ^ _НН_МННШ1Ш|ММИ|НН|Н|НН|Н|Ш_

MOTOR | |




Timing Belt

0.5 0,4

1 0,7

63:1

2:1

1.5 ,,1

1 0,7

90:1

2:1

^ _^ _^ ^ ^____B ^ ^ ^ ^ ^ ^ __^ ^ ^ ^__HIH__IMHIBH___Hi__lll_^ B_ H_l

OPERATING SPECIFICATIONS | |





50% /100%100°F 38°C

115±15%@15amps

120 8,3

_Il ^_IIHIIla>i ^ ^ ^_MI__^__H_^_^ ^ _ M B ___HMMM_H ^ ^

50% /100%

100°F 38°C

115±15%@15amps

120 8,3

^^___IH_l _^^^^____._ H ^^^^_aaaBBB>l _M__ll _^___B___HH_HHBII_

WEIGHT | |

Table (lb);kg)

Control (Ib)ikg)


90 '

13 5,9

14.2 6,4

165 /4,8

13 5,9

14.2 6,4

'See page 38.Due to continual development, all machine specifications are subject to change.

TRT Series

•ЯШ Ш» ••• 160 & TRT 210 - Eliminate second and third

•K operations and setups by using the Haas TRT

• III 210 or TRT 160 two-axis tilting rotary

table. Machine up to five sides of a

part, and easily program the con-

trol to reach virtually any JJl \

compound angle. When used on a *\i

Haas VMC with the 5-axis option, |||

complex geometries - such as

impellers - are easily accomplished. «

The TRT 160 and 210 are sturdy,

high-precision tilting units that easily *-.

interface with a Haas VMC; or, add the

Haas servo control* and they'll run on any other VMC.Specifications and Dimensions

Maximum fixture and part

weights are 300 Ib for the TRT 210 and

150 Ib for the TRT 160. With a 200 Ib

load on the TRT 210, there is less than

0.0002" deflection. By utilizing massive

castings, and bearings at both front and

rear sections, Haas is able to build an

extremely rugged and durable tilting

table. Includes dual-axis servo control &

CNC interface cable for semi-4th & 5th-

axis operation. Available with Al-5 or

Al-6 platter.

* Brushless 2-axis servo control not

available. Brushless single-axis control

available for use with Haas machining

centers with 4-axis controls. Call for

compatibility with Haas machining

centers with 4- and 5-axis controls.

TRT Series

ID. Part#A. TRT 160

B. TRT 210

Description

Tilting 5th-Axis Rotary Table160 mm (6.30")

Tilting 5th-Axis Rotary Table210 mm (8.27")

Front View Min. Clearance, F

(Maximum Part/ Fixture Radius)

44'4 267 mmCable

Side View

DIMENSIONSi HDD (Inches Millimeters)

TRT 160 TRT 210160 mm (6.30") 210 mm (8.27")

AAi 21.28 18.08 25.84 24.34

540,51 459,23 656,34 618,24

В

Top View

6.00

152,40

±120°

2.00

50,80

7.75

196,85

1.18

29,97

12.39

314,71

14.14

359,16

4.25

107,95

КЮ 26.15 26.15

8.48

215,39

±120°

1.00

25,40

9.00

228,60

0.40

10,16

15.90

403,86

17.65

448,31

6.00

152,40

33,36 31.10

664,21 664,21 847,34 789,94

(Ai,Ki = Brushless Models)

Machine up to five sides of a part, eliminate multiple operations

and setups, and increase your production output by using our 2-

axis tilting rotary tables. The TRT 160 and 210 are sturdy, high-

precision tilting units that easily interface with a Haas VMC; or,

add the Haas servo control and they'll run on any other VMC.

TRT 160 TRT 210

Rotary В axis Tilt A axis Rotary В axis Tilt A axis

SPINDLE

Torque (ft-lb)INm)

Brushless (ft-lb)INm)

Runout Max (in)(mm|

Backlash (arc-sec)

Speeds (°/sec)


Brake Torque (ft-lb@ioopsi) (Nm ое.эьаг)

100 136

150 203

0.0005 0.0127

30

0.001 to 80

N/A

100 136

210 2!

210 285

0.0005 0,0127

30

0.001 to 60

7.750+0.001 197 ±0,025 4

200 271

210 ""

210 285

0.0005 0,0127

30

0.001 to 60

N/A

200 271

200 271

300 407

0.0005 0,0127

30

0.001 to 50

9.000 ±0.001

500 678

228,6 ±0,025 4

INDEXING1

Accuracy (arc-sec)


Resolution (°)


±15

10

0.001

999.999

+25

10

0.001

±120

±15

10

0.001

999.999

+25

10

0.001

±120

MOTOR



Timing Belt

0.5 0,4

1 0.7

2:1

1.5 1,1

1 0,7

2:1

1.5 1,1

1 0,7

2:1

1.5 1,1

1 0,7

2:1




Max Air Pressure (psi)(bar)

100°F 3

115 ±15% @ 15 amps

120 8,3

100°F 3

115+15% @15amps

120 8,3

100°F 3

115 ±15% @ 15 amps

120 8,3

100°F 3

115±15%<3

120 8.3

15 amps

WEIGHT 1

Table (lb)(kg)

Control (lb)(kg)


400 181,4

17(2-axis) 13(1-axis) 7,7 (2-axis) 5,9(1-axis)

23.1 (2-axis) 14.2(1-axis) 10,4 (2-axis) 6,4(1-axis)

735 333,4

17 (2-axis) 13 (1 -axis) 7,7 (2-axis) 5,9 (1 -axis)


Due to continual development, all machine specifications are subject to change. 'See page 38.

TR 21OB/310B Trunnion

тявт BUfe гюв & зюв тшппюп -V^b If you need a 5-axis

I s o l u t i o n for your

3-axis mill, look to the Haas TR 210B

and TR 310B Trunnion rotary tables

for a simple bolt-on solution for

machining complex parts. These

dual-axis trunnion

tables bolt directly

to the mill's table

to provide 5-axis

s i m u l t a n e o u s

motion or position

parts to nearly any angle

for multi-sided machining.

•±120° tilt, 360° rotation

• Simple bolt-on mounting

• Machine multiple sides in

one setup

• 23.5" max part swing

TR Trunnion Series

• Fast setups



• Made in the USA


A. TR210B Dual-Axis Trunnion Table

w/210mm Platter

B. TR310B Dual-Axis Trunnion Table

w/31 Omm Platter


1\

EB-Axis

(Platter Height)

1

/S^~~

/

О

—

'о „О

atч

( )

р^/Сьгй\

\\

1 __Л 1= =

^ . .

\\

/

^/'^

[

В *•

DPar

DJ

У

1

O

0

Swing

;Шi

- G

0 01

Щ 0 «

\ оГ

5 (t=F-

о о

о) <Е.

0 С

С

DIIV

д

ВСD 0ЕFGН1J 0КLМ

/

/ 1

К \

\ / A-Axis Swing Clearance

" iv\ A'AxisCL Т /^"^jUPxx N ~Û

J I , Scale1 '''ISlot Detail (4X)

ENSIGNS (Inches Millimeters)

TR 210B 210 mm (8.27") TR 310B 310 mm (12.20")8.50 215,90 12.00 304,8028.03 711,96 33.4215.56 21.2123.50 31.0011.88 301,75 14.87538.50 52.00 1 320,8049.59 1 259,59 62.57 1 589,2826.21 665,73 33.0037.14 50.64 1286,2619.19 487,43 25.0016.64 422,66 21.8012.00 15.000.50 12,70 0.500.53 13,46 0.53

This is just one example of how the new Haas TR 210B and 310B

Trunnion tables can increase your productivity. They allow you

the ability to machine with full simultaneous five-axis motion

or position a workpiece to almost any angle.

B.

TR 21 OB TR 310B

SPINDLE

Table (Ib) (kg)


Rotary В axis Tilt A axis Rotary В axis

815 370

23.1 (2-axis) 14.2(1-axis) 10,4(2-axis) 6,4(1-axis)

Tilt A axis

Torque (ft-lb) (Nm)

Runout Max. (in) (mm)(Platter Pilot ID)

Backlash (arc-sec)

Speeds (%ec)

Brake Torque (ft-lb @ wo psi) (Nm @в,эьаг)

210 285

0.0005 0,0127

30

0.001 to 60

200 271

300 407

N/A

30

0.001 to 60

400 542

300 407

0.001 0,0254

30

0.001 to 50

500 678

300 407

N/A

30

0.001 to 50

1000 1356

INDEXING1

Accuracy (arc-sec)


Resolution (°)


±15

10

0.001

999.999

±35

10

0.001

±120

±15

10

0.001

999.999

±35

10

0.001

±120

MOTOR•••••••••••••••••••••шивииии и^^ииввии^вии^^

Type (hp AC servo) (kW AC servo)

Gear Ratio

Timing Belt

^ ^—.- ^—.i.--. ^ ^ ^ ——..———— .-.--.-.. ^ ^ ^ ^ ^ ^ ^ ^—

• •••HiHMMI HHH ^ ^ ^ m BH ^ H

1 0,7

90:1

2:1

3 2,

90:1

2:1

3 2,

72:1

3:1

••••••••••••••••M3 2,2

72:1

3:1

OPERATING SPECIFICATIONSDuty Cycle full/low speed




50% /100%

100°F 38°C

230±10%@20amps

120 8,3

50% /100%

100°F 38°C

230±10%@20amps

120 8,3

50% /100%

100°F 38°C

230±10%@20amps

120 8,3

50% /100%

100°F 38°C

230±10%@20amps

120 8,3

PLATTER

Part Swing (max) (in) (mm)

Capacity (Ib) (kg)

Platter Diameter (in) (mm)

23.5 596,9

200 91

8.27 210

N/A

200 91

8.27 210

31 787,4

500 227

12.2 310

N/A

500 227

12.2 310

WEIGHT

1720 780


Due to continual development, all machine specifications are subject to change. 'See page 38.

Т5С Series

тятшт JM| , T5C 2, T5C 3, Т5С 4 - Use the T5C

to eliminate second and third

Щйг 4bJ operations by automatically

repositioning your parts to a new angle. All

four versions of the T5C feature fast

setup, and they increase

productivity by reducing

manual parts handling

and the number of tool

changes. With the T5C 2, 3

or 4, either two, three or four

parts can be machined completely

before making a tool change. Utilize

the full 360 degrees of spindle rotation

and 240 degrees of tilt to reach virtually any angle. Plus,

you can simulate 4th- and 5th-axis operations. All four

units feature the HRT 210 as the operating base for

tilting, and either one, two, three or four HA5C heads for

the 360 degrees of rotation.

1 Uses standard 5C collets1 Threaded spindle nose for chucks1 Coolant-resistant polyurethane

conduit & seals1 Fast, easy, flexible programming

• Interfacing via M function




• Made in the USA


Т5(


AAi 20.32 18.52

516,13 470,41В 0.70

17,78

С 10.20

259,08D 12.39

314,71E +907-120°

F 6.000

152,40(Ai - Brushless Models)

: Si

14' 4Cabl

g

ngle Spindle

3 mв Г-41

П1гшл

1( L

mу

3

@%-S4=

1

s1&

=1LA, A

>*

14--L UK"

\^ ' D

- * . .С

1 1

1 1

E ••~

V — '1—f

•., Ill3t

o!:

T5C Two, Three & Four Spindle


T5C-333.64

854,460.55

13,97

5.000 TYP

127TYP

10.30

261,62

12.39

314,71

1.50

38,10

+907-120°

6.000

152,40

T5C-438.64

981,460.55

13,97

5.000 TYP

127 TYP

10.30

261,6212.39

314,711.50

38,10

+907-120°

6.000

152,40

Т5С Series


A. T5C Tilting 5-Axis Rotary Table, HRT 210

tilting w/HASC rotation

B. Т 5 С 2 Tilting 5-Axis Rotary Table, HRT 210

tilting w/HASC 2 rotation

C. Т5С 3 Tilting 5-Axis Rotary Table, HRT 210

tilting, w/HASC 3 rotation

D. T 5 C 4 Tilting 5-Axis Rotary Table, HRT 210

tilting, w/HASC 4 rotation

T5C: One, Two, Three & Four Spindle Configuration

£431

Collet closers not supplied. Use AC-25 or AC-125. See pages 30-31.

T5C (combines an)

SPINDLE

Torque (ft-lb) (Mmi

Brushless (ft-lb) (Mm)


Backlash (arc-sec)

Speeds (°/sec)

Tooling


Brake Torque (ft-lb @ 100 psi)(Nm @6,9bar)

INDEXING1

Accuracy (arc-sec)


Resolution (°)



^^__H_____l_>_B_a_..aMa__l_l____i^__^^^_^___

MOTOR




Timing Belt

••«••« • •«••••• •••••••««•• •«••••• ••B






HRT 210 (with an)

I SPINDLE

210 285

210 285

0.0005 0,0127

30

0.001 to 60


6.000 ±0.001 152,4 ±0,025 4

200 271

Torque (ft-lb) (Nm)

Brushless (ft-lb) (Nm)


Backlash (arc-sec)

Speeds (°/sec)

Collets (in)

Nose Thread (in)

Center Height (in) imm)

INDEXING1

±15

10

0.001

999.999

6.3 160

Accuracy (arc-sec)


Resolution (°)



MOTOR

1.5 1,1

1.0 0,7

90:1

2:1




OPERATING SPECIFICATIONS |

50% /100%

100°F

115±15%@15A

120

WEIGHT

Table (Ib)Control (Ib)

165

17(2-axis) 13(1-axis)7,7(2-axis) 5,9(1-axis)




Max. Air Pressure (psi) (bar)

HA5C

45 Б1

60 81

0.0004 0,0102

40

0.001 to 270

std5C(VBi-1Vi6)

23/16-10

4.000 ±0.001

±30

10

0.001

999.999

2.8

0.5 0,4

0.75 0,6

60:1

75% ©full speed

100°F 38°C

1 15 ±5% @ Samps

120

HA5C2

20 (per spindle)

25 34

0.0004 0,0102

50

0.001 to 200

std5C(Vw-1Vi6)

23/16-10

5.875 ±0.002149,2 ±0,050 8

±60

10

0.001

999.999

2.8 71

0.5 0,4

0.75 0,6

60:1

75% ©full speed

100°F

1 15 ±5% @ Samps

120

HA5C 3*

HA5C 4*

20 (per spindle)25 У\

0.0004 0,0102

50

0.001 to 200

std5C(V»-1Vi6)

23/16-10

5.875 ±0.002149,2 ±0,050 8

±60

10

0.001

999.999

2.8

1.5 1,1

1.0 0,7

60:1

75% @ full speed

100°F

1 1 5 ±5% @ 3 amps

120

Rotary Head (Ib)

Control (Ib)

48 120 168(3HD) 250 (4HD)

17(2-axis) 13(1 -axis) ',7 (2-axis) 5,9(1-axis)

Brushless Control ( lb)(kg) 23.1 (2-axis) 14.2(1-axis)10,4(2-axis) 6,4(1-axis)

Brushless Control (Ib) (kg) 23.1 (2-axis) 14.2(1-axis) 10,4 (2-axis)

* Not for use with tailstocks. "Without tailstock. 'See page 38.Due to continual development, all machine specifications are subject to change.

HA2TS

T he HA2TS is a self-contained setup of two HASCs and

two pneumatic tailstocks mounted on a subplate.

Utilizing this high-productivity design guarantees

accurate alignment while maintaining high output. The HA2TS

features fast setups, and increases productivity by reducing the

number of tool changes and handling time. The tailstocks adjust

to the length of your parts by sliding on T-slots.

The minimum distance from HA5C to tailstock when the spindle

is extended is 2.30", while the maximum distance is 12". The

distance between centers is 5".

Tailstocks

ID. Part*A. HA2TS

Description

Dual Spindle Mounted on Plate wДailstocks

MADE IN USA

I (

Ш" *ВД^|||№

A.

Collet closers not included. Use AC-25 or AC-125. See pages 32-33.


HA2TS - Top View


19.50

9.875

5.00 ±0.0005

2.30 min

9.95

17.50

495,30250,83127,00 ±0,012 7

58,42 min252,73

444,50

HA2TS - Side ViewA


A 12.00 max

В 2.50 min

С 1.875

D 29.50

304,80 max

63,50 min

47,63749,30

J

Pneumatic Tailstocks

ID. Part # Description

A. HPTS14.5 Pneumatic Tailstock,

14.5" (368,3 mm) center height for HRT 600

HPTS11.51 Pneumatic Tailstock,

11.5" (292,1 mm) center height for HRT 450

B. HPTS9 Pneumatic Tailstock,

9" (228,6 mm) center height for HRT 310

C. HPTS6 Pneumatic Tailstock,

6" (152,4 mm) center height for HRT 210

D. HPTS5 Pneumatic Tailstock,

5" (127 mm) center height for HRT 160

E. HPTS4 Pneumatic Tailstock,

4" (101,6 mm) center height for HA5C

Manual Tailstocks

ID. Part# Description

HTS14.51 Tailstock, 14.5" (368,3 mm) center height for HRT 600

F. HTS11.5 Tailstock, 11.5" (292,1 mm) center height for HRT 450

G. HTS9 Tailstock, 9" (228,6 mm) center height for HRT 310

H. HTS6 Tailstock, 6" (152,4 mm) center height for HRT 210

J. HTS5 Tailstock, 5" (127 mm) center height for HRT 160

K. HTS4 Tailstock, 4" (101,6 mm) center height for HA5C

Tailstocks

Tailstocks are available for all Haas rotary

products. All mounting surfaces of our

tailstocks are accurately ground, the spindles

are individually fitted to their bores for minimum

deflection, and bottom alignment pins are provided

for fast setup without indicating. Tailstocks are

available in manual or pneumatic types, with center

heights to match corresponding Haas rotary products.

All tailstocks are Morse taper #3. Live centers are

recommended, but not included.

A.F.

K.

'Not Shown

Tailstocks


Pneumatic Tailstocks


AВСDEFGHJКLMN

AВСDEFGHJКLMN

HPTS4

4.000 ±0.001

2.75

0.53

4.00

6.00

11.715

2.50 Travel

0.525

6.280 ±0.01

2.25

3.00 ±0.0003

0.425

7.50

HPTS66.000 ±0.001

2.75

0.53

4.00

6.00

11.7152.50 Travel

0.5256.280+0.01

2.25

3.000 ±0.0003

0.425

7.50

101,6 ±0,025 469,8513,462101,60152,40

297,561

63,50 Travel

13,335159,512+0,254

57,15

76,2+0,00762

10,795190,50

152,4+0,025469,85

13,462101,60

152,40

297,561

63,50 Travel13,335

159,512 ±0,254

57,15

76,2 ±0,007 62

10,795

190,50

HPTS55.000 ±0.001

2.75

0.53

4.00

6.00

11.715

2.50 Travel

0.525

6.280 ±0.01

2.25

3.00 ±0.0003

0.425

7.50

HPTS99.000 ±0.0012.75

0.53

4.00

6.00

11.715

2.50 Travel

0.525

6.280 ±0.01

2.25

3.000 ±0.0003

0.425

7.50

127+0,0254

69,85

13,462

101,60

152,40

297,56163,50 Travel

13,335

159,512 ±0,254

57,1576,2+0,00762

10,795190,50

228,6 ±0,025 4

69,85

13,462

101,60

152,40

297,561

63,50 Travel

13,335

159,512 ±0,254

57,15

76,2+0,00762

10,795

190,50


А

В

СDЕFGHJКLM0N

HPTS11.511.50 ±0.001 292,1 ±0,025 4

2.75

0.53

5.50

6.75

11.715

2.50 Travel

0.525

63,50 Travel

8.28

2.75

4.000+0.0003 •'. 1,6 ±0,007 620.625+0.001 15,875+0,0254

9.50

HPTS14.14.50 ±0.001

2.75

0.53

5.50

6.75

11.715

2.50 Travel

0.525

8.28

2.75

4.000 +0.0003

0.625 ±0.001

9.50

5368,3 ±0,025 4

69,8513,462

139,70

171,45

297,561

63,50 Travel

13,335210,312

69,85

101,6 ±0,007 6215,875 ±0,025 4

241,30

HA2TS Two-Spindle with Tailstocks

Torque (ft-lb)

Brushless (ft-lb) (Nin)

Runout Max (in)

Speeds (°/sec)

Collets (in)

Nose Thread (in)

Spindle Center (in) lr"

30

45 G1

0.0004

0.001 to 200

std5C(1/H-11/i6)

23/i6-10

s t d 5 C ( 0 , 4 t o 2 7 )

5.875+0.002 149,2

INDEXING1

Accuracy (arc-sec)


Backlash (arc-sec)

Worm Gear Diameter (in)

Resolution (°)

Max Step Size (°)

±60

10

50

2.8 71.1

0.001

999.999

Type (hp DC servo)

Brushless (hp AC servo) (kvV



Duty Cycle



0.5 u.'i

0.75 0,6

60:1

•I75% @ full speed

100°F

115 VAC+5% @ Samps

Rotary Head (lb)(kg) 280

Control (Ib) (kg) 13

Brushless Control (Ib) (kg) 14.2


A Haas tailstock used to support an extra-long workpiece

with complex cutting requirements. Haas tailstocks are

available for every size rotary table in our line, and are

available in manual or pneumatic types.


Manual Tailstocks

j

'

В

/j

i\

\

L

fl ^C

О

ТГ

DF

F

^

A\ '

J) ---

_\

H -i

-z3Г21 - a

•,].


HTS4AВСQ

EFGHJКL

4.000 ±0.001 101, 6 ±0,025 4

2.75 69,85

#3 Morse Tapern c;1)

4.0013 462

101,60

2.50 Travel 63,50 Travel0.632.250.507.50

Ib.UU

57,1512,70190,50

6.280+0.01 159,512+0,254M 3.000 ±0.0003 76,2 ±0,007 62NP

3.44 87,380 0.625+0.001 15,875 ±0,025 4

HTS6AВСDEFGHJКLMNP

6.000+0.001 152,4 ±0,02542.75 69,85#3 Morse Taper0.534.002.50 Travel 63,50 Travel0.632.25 57,150.507.506.280 ±0.01 159,51 2 ±0,2543.000 ±0.0003 76,2+0,007623.44 87,37

0 0.625+0.001 15,875 ±0,025 4

MRi

, г- -M-J

I[ ~

LocatingPins

N —

HTS55.000 ±0.001 127 ±0,0254

2.75 69,85

#3П R

Morse TaperQ fl P'-

4.00 101,602.50 Travel 63,50 Travel0.63 16,002.25 57,150.50 12,707.50 190,506.280 ±0.01 159,512 ±0,2543.000 ±0.0003 76,2 +0,00762

3.440.625+0.001 15,875+0,0254

HTS99.000 ±0.001 228,6 ±0,025 42.75 69,85#3 Morse Taper0.53 13,4624.00 101,602.50 Travel 63,50 Travel0.63 16,002.25 57,150.507.50 190,506.280 ±0.01 159,512+0,2543.000+0.0003 76,2+0,007623.440.625+0.001 15,875+0,0254

} ~F\ ^3\в

A

|

^ —

JJ ?k JT Пт-/ о \и в \

^JNê!//} ( '"

у V

JLD

— E —

I T'\ L— -_1 Г" ™»---wTm~ — rrf

^-ч /^

1

1

1 I 1

- И

-^ imm „

Pins


NTS 11. 5 HTS14.5A 11.500+0.001292,1+0,0254 14.500 ±0.001 368,3+0,0254В 2.75 2.75С #3 Morse Taper #3 Morse TaperD 0.53 13,462 0.53 13,462E 5.50 139,70 5.50 139,70F 2.50 Travel 63,50 Travel 2.50 Travel 63,50 TravelG 0.63 16,00 0.63 16,00H0 0.625 ±0.001 15,875+0,0254 0.625 ±0.001 15,875 ±0,025 4J 8.28 210,312 8.28 210,312К 4.000 ±0.0003 101, 6 ±0,007 62 4.000 ±0.0003 101 ,6 ±0,007 62L 9.50 241,30 9.50 241,30M 2.75 69,85 2.75 69,85N 2.44 61,98 2.44

QuikChange Tooling System

QuikCube System

Shown with Optional Cube

For increased productivity, add the Haas

QuikChange System to the Haas HRT 210 or

HRT A6 rotary table. The fixture cubes or

plates are loaded and released via pneumatic

actuator, allowing the user to change from

cube to cube (plate to plate) in less than

five seconds.

Productivity is increased by mounting

multiple parts to the fixtures, so more parts and

more sides are machined per setup. The result is

reduced cycle times, which means increased profits.

In addition, the operator can load parts on one

QuikChange fixture while another is being machined.

• Note: Repeatability is 0.0005 for cubes mounted on same system.

The QuikChange Tooling System is simple to use. Moving the lever on the back of the unit is all it takes

to quickly lock or unlock the cube or plate. Use several cubes to boost productivity - load parts on one

cube while the other is in-process. Mounting and removal of the cube or plate is simple and quick.


QuikCube V-Lock Plate Air ActuatorHaas Rotary TableModel HRT 210

Front ViewDimensions of Cube:4.55" sq x 4.55" long115,57 mm sq x 115,57 mm long

Back View


A 7.00

177,80

В 11.00

279,40

С 25.00

635,00

Side View

I

ЛI "

Shown with Optional Plate

Tooling Systems

ID. Part* DescriptionA. HQCCS QuikChange System

for HRT 210 (Cubes or plates not included)

HQCCSA6 QuikChange Systemfor HRT A6 (Cubes or plates not included)

TBS1601 Tooling Block Systemfor HRT 160

TBS 210 Tooling Block Systemfor HRT 210

TBS 3101 Tooling Block Systemfor HRT 310

B. CUBE1 Cube only

C. PLATE KIT1 QuikChange plate and support

PLATE QuikChange plate only

'Not Shown

C. QuikChange PlateV-Lock Plate Air Actuator

Front View

ft ffl:f И ,1 LJ IE

J I

§t

- — в


Haas Rotary TableModel HRT 210

Side View

rti

2.00 min clearance

50,8 min clearance

11.00

279,40

33.46

1.00

25,40

8.00

203,20

10.00

254,00

Back View QuikChange Plate

A Haas QuikChange System used with a cube holding four partsper surface. Not only can you machine all four surfaces in oneload-unload motion, but a second cube (or plate) can be loadedwith parts while another is in-process for high productivity and

increased profits.

Tooling Block System

Another great productivity tool is the Haas Tooling Block

System, for mounting on any Haas HRT 160, HRT 210 or HRT 310

rotary table.

The Tooling Block System is made from 6061-T6 aluminum alloy

and can be easily machined to meet your requirements. The system

includes the aluminum tooling block, an outboard A-frame support

and a steel mounting plate. They are designed for bolt-together

alignment when used on a precision Ve" T-slot. Since the tombstone

can be loaded with 8, 12, 16 or more parts, all can be machined with

the same tool before going on to the next tool.


f Part* Rotary Table

TBS160 HRT 160

TBS210 HRT 210

TBS210-20 HRT 210

TBS310 HRT 310

X (Length) Y (SO) Z (Center Dist.)

12.00 304,80 4.00 101,60 5.00 127,00

12.00 304,80 4.50 114,30 6.00 152,40

20.00 508,00 4.50 114,30 6.00 152,40

19.00 482,60 6.00 152,40 9.00 228,60

Air Collet Closers

H

AC-1Z5

aas offers three types of collet closers for

use on HA5C indexing heads. Each of the

three designs offers unique benefits you

should consider before making a selection. AC-125

and AC-25 use shop air to drive a piston through a

mechanical multiplier to close the collet. This provides greater

holding force and reduces operator fatigue, compared to

standard manual-handle closers. A simple flick of a lever causes the collet

to open or close without effort. On multi-spindle heads, one of these air-

actuated closers is required if you plan to use collets, because a standard

handle will not fit and is not included.

HA5C with AC-100 Installed

The AC-125 is our most popular design and provides up to

12,000 Ib of draw-tube force with 0.060" of travel - allowing part

diameter variation of 0.015" without readjusting the collet. Its

design is similar to the AC-25 but uses two pistons, which more

than double the available draw force. A large internal spring is

used for part release. The AC-125 can be tightened from the rear

and provides a Vie" thru-hole. Its compact size allows it to be

used with all models of HASCs, and with the use of a small spacer,

it can be operated vertically. Clamping force pressure is varied by

regulating air pressure supplied to the unit (normal operating

range is 45 to 60 psi). The AC-125 air collet closer can be used

with all types of 5C collets, including step collets. Closers will

not remain clamped if Loss of air occurs.

HA5C with AC-1Z5 Installed


A

В

С

1.90

1.36

1.23

48,26

31,24

D0 4.00 101,60

E 0.312 (Thru) 7,925

Adjustable Drawbar

Operating Pressure 85-120 psi 5,861-8,275 barClamping Ability Adjustable 0-120 ft-lb 0-162,69 Nm

(1'0 steel Bar) (25,4 mm 0)Release Mechanism Air Actuated


Collet Draw Force 0-10,000 Ib 4 536 kgClamping Mechanism Spring ActuatedDraw Bar ID 1Vs"0 Thru Hole (28,57 л

A 6.80 172,72

В 14.75 374,65

С 0 3.50 88,90

D 4.00 101,60

E 11.85

f 1.12 (Thru) 28,45 (Thru)

G0 4.98 126,49

AC-100

The AC-100 uses spring force for part clamping, and air

pressure for release. It will retain full part clamping even if air

pressure is removed. The AC-100 provides a IVs" diameter

thru-hole, and collets are easily tightened from the rear. It

provides up to 10,000 Ib of draw-tube force, with 0.025" travel,

and can be used for drilling and milling in most applications. The 0.025"

travel allows for a part diameter variation of 0.006" without the

need to readjust the collet. Due to its long rearward length, the

AC-100 cannot be used vertically, and is not recommended for

tilting HASCs. Also, some consideration must be given to clear-

ances when using the AC-100 parallel to the Y axis, as its length

may collide with the Z-axis waycover. Closers will remain clamped

if loss of air occurs.

Air collet closers reduce operator fatigue and provide greater

holding force on HA5C indexing heads - all with the simple flip

of a lever. Three different designs are available to meet your

machining needs.

Air Collet Closers A6-AC

ID.A.

Part*

AC-125

В. АС-100

С. АС-25

D. A6-AC

AC-Z5

Description

High Torque, 5/1б" Thru-HoleAir Collet Closer for HA5C

High Torque, 11/s" Thru-HoleAir Collet Closer for HA5C

Compact, Non Thru-HoleAir Collet Closer for HA5C

High-Torque, 13/4" Thru-HoleAir Collet Closer for HRTA6

The AC-25 is our smallest and most economical closer.

It fits entirely inside the HA5C body, and can be used both

vertically and horizontally. Since it utilizes air pressure to

close, part clamping pressure can be varied easily by

regulating the applied air pressure. The AC-25 provides

medium holding power of up to 3,000 pounds draw force, with

0.030" of travel, and is recommended for drilling and light

milling of collet-size parts. The 0.030" travel allows for a part

diameter variation of

0.007" without the

need to readjust the

collet. The AC-25

should not be used

with step collets. The

AC-25 does not have

a thru-hole, and

collets must be tightened using a 9/64" Allen wrench,

tightening through the collet. Collet stops may be used, but

must be drilled completely through to accommodate the

Allen wrench. Closers will not remain clamped if loss of air occurs.

The A6-AC pneumatic draw bar assembly works with A65C

and A616C collet adapter chucks to provide 5C and 16C air

collet closing capabilities for the HRT A6. With the A6-AC,

collets can be clamped with the flip of a switch. The A6-AC is

also compatible with 3J collet adapters that may be purchased

through your local tooling supplier.

The A6-AC provides up to 5,000

pounds of draw-tube force with

0.125" of travel. Clamping force

is spring actuated and adjustable

to 100 ft-lb. The A6-AC

tightens from the

rear, and has a

1.75" thru-hole.

Closers will remain

clamped if loss

of air occurs.

HRT A6 with A6-AC Installed

Operating Pressure 80-120 psi 5,51Clamping Ability Adjustable 0-100 ft-lb 0 125.581 P

[1"0 Steel Bar) ' 5 4 m m Q )Collet Draw Force Adjustable 0-5,000 Ib u-2268 kg

Collet Draw Adjustable 0-0.125" 0-3,175 mmClamping Mechanism Spring Actuated

DIMENSIONS (Inches )

A 2.21В 1.875-16UN-2BC0 1.75D 3.2E 10.07

О

Interface CablesA.

Haas offers a variety of cables to

make interfacing Haas Rotary Tables to

your machines quick and easy. We build

and test each interface cable assembly in our

state-of-the-art production facility. They feature manual and

M function interfaces and will connect any

Haas rotary product to most CNC

and manual machines.

Chucks

Eight-inch, 3-jaw chucks, models LC8A6-B & LC8-B, for the

HRT A6 and HRT 210 respectively, can be mounted in minutes

with superb accuracy and concentricity. For the

HA5C, the LC5C-B 5" 3-jaw chuck simply

threads onto the spindle nose. All required

hardware is supplied

by Haas.

Accessories

H.

8" & 11" Faceplates

The HRT A6 model can use the optional 8" or 11"

faceplates (models FP8 and FP11, shown here) to

accommodate your own special fixtures and parts. The recess

on the backside of the faceplate simply slips over the Al-6

platter and is bolted down. All required hardware is supplied

by Haas.

5C & 16C Collet Adapters

A 5C (A65C) or 16C (A616C) collet adapter can be mounted

on the HRT A6, and collets can be closed with the optional

factory-installed pneumatic draw tube assembly (A6AC). The

adapter from draw tube to collet is included with the A65C.

Keep in mind, the 5C spindle adapter has a

23Лб"-10 threaded nose, which can

be used for oversized collets,

collet chucks and small fixtures.

3J and 16C collet adapters can

also be used, and are available

from your tooling supplier.

All required hardware is supplied

by Haas.

HRT 210Optional Chuck Mounting

LC8-B - 8" (2 13 mm), 3-jaw chuck LC8A6

ID.A.

B.

C.

D.

E.

F.

Part*CA1417

CNC

RQS

IB

LC5C-B

LC8-B

DescriptionCable Adapter, 14 to 17 pin

Extra CNC Interface Cable

Remote Quill Switch

Interface Box & Cable

5" Solid Jaw, Reversible,3-Jaw Chuck for HA5C

8" Top Reversible,3-Jaw Chuck for HRT 210

ID. Part#

LC10-B1

LC6-B1

LC6A5-B1

G. FP11

H. FP8

J. AB5C

Description

10" 3-Jaw Chuck for HRT 310

6" Top Reversible,3-Jaw Chuck for HRT 160

6" A1 -5 Top Reversible,3-Jaw Chuck for HRT A5

11" A1 -6 Faceplate for HRT A6

8" A1 -6 Faceplate for HRT A6

5C Collet Chuck Adapter8" A1-B Top Reversible,3-Jaw Chuck for HRT A6

for HRT A6

'Not Shown

Applications

T his HA5C is being used for a simple,

point-to-point positioning applica-

tion. Used in this way, there are

360,000 different positions programm-

able to within 0.001°. A program can

contain up to 99 different steps and

each of these steps can be repeated up

to 999 times.

A n HA5C being used in a 4th-

axis milling application on a

Haas VF-1 CNC machining center.

With simple programming and easy

interfacing to any other CNC machine,

the HA5C functions competently as a

semi-fourth axis activated by one

M function. Both arc and spiral |

milling operations are easily

achievable. These attributes make

the HA5C the perfect alternative to cumbersome and expensive offshore fourth-axis

machines. A standard interface cable is included.

L oading a part is easy with the HA5C

manual collet closer. Install the collet

by aligning the keyway on the collet with

the key inside the HA5C spindle. Turn the

collet draw tube until proper collet

tightness is obtained, insert your part and

pull back on the handle to clamp.

A II T-slot rotary tables can be easily fitted with 3-jaw chucks. Flat-back chucks

are usually installed and aligned by clamping a bar a few

thousandths of an inch smaller than the diameter of the thru-hole and

leaving an inch or two hanging out the back of the chuck. Insert the bar into the

thru-hole of the rotary table, rotate the chuck until the bolt holes align with the

T-slots, then insert the T-nuts and bolts.

A ll Haas rotary products can be

used as a true fourth axis when

integrated on a Haas machining

center, or as a semi-fourth axis on

any other CNC machine by

programming a G94 code in the Haas

control. Simultaneous rotational

milling, as well as spiral milling, can

be easily achieved.

H A5C utilizing the 23Лб"-10 threaded spindle

nose to mount a 5" 3-jaw chuck. By entering a

G98 code, a circle can be evenly divided into

anywhere from 2 to 999 divisions. Also, odd-

numbered bolt circles and uneven hole spacing are

easily handled through simple programming.

Accessories ChartHA5C HA5C, 2, 3, 4 HRT 160

Collet Closers

AC-25 Compact, Non Thru-HoleAC-1OO High Torque, with 1" Thru-HoleAC-125 High Torque, with 5/16" Thru-HoleA6AC Pneumatic Draw Tube, 1 .75" I.D. Thru-HoleMANCCA Manual Collet Closer AssemblyHMDT Haas Manual Draw Tube

Chucks

LC5C-B 5" Adjust True, Solid Reversible, 3-JawLC8-B 8" Adjust True, Top, Reversible, 3-JawLC8A6-B 8" Adjust True, A1-6 Top Reversible, 3-JawLC1O-B 10" Adjust True, Top Reversible, 3-JawLC6-B 6" Adjust True, Top Reversible, 3-JawLC6A5-B 6" Adjust True, A1-5 Top Reversible, 3-Jaw

Haas Tailstocks #3 Morse Taper1

HTS4 Manual Tailstock, 4" Center HeightHTS5 Manual Tailstock, 5" Center HeightHTS6 Manual Tailstock, 6" Center HeightHTS9 Manual Tailstock, 9"HTS11.5 Manual TailstockHTS14.5 Manual Tailstock

Center Height1 1.5" Center Height14.5" Center Height

HPTS4 Pneumatic Tailstock, 4" Center HeightHPTS5 Pneumatic Tailstock, 5" Center HeightHPTS6 Pneumatic Tailstock, 6"HPTS9 Pneumatic Tailstock, 9"HPTS11.5 Pneumatic Tailstock

Center HeightCenter Height1 1.5" Center Height

HPTS14.5 Pneumatic Tailstock, 14.5" Center Height

HRT A6 Accessories

FP8 8" A6 FaceplateFP11 11" A6 FaceplateA65C 5C Collet ChuckA616C 16C Collet ChuckHQCCSA6 QuikChange System (cube or plates not included)HQCA6KIT Adapter Kit (HQCCS required to adapt to HRT A6)

Fixturing Accessories

HQCCS QuikChange System (cube or plates not included)CUBE QuikChange Cube (4.55" cubed)PLATEKIT QuikChange Plate and Support - Use with HQCCSPLATE QuikChange Plate Only (8"W x 1O1 " x 1 ")TBS-160 Complete Tooling Block System (12" length x 4"square)TBS-210 Complete Tooling Block System (12" length x 4.5"square)TBS-21O-2O Complete Tooling Block (20" length x 4"square)TBS-31O Complete Tooling Block System (19" length x 6"square)ADP5 Adapter Plate Only, HRT 160ADP6 Adapter Plate Only, HRT 21 ОADP9 Adapter Plate Only, HRT 31 ОBLK5-12 Aluminum Tombstone Only, 4" x 4" x 12"BLK6-12 Aluminum Tombstone Only, 4.5" x 4.5" x 1 2"BLK6-2O Aluminum Tombstone Only, 4.5" x 4.5" x 2O"BLK9-16 Aluminum Tombstone Only, 6" x 6" x 19"SUPS A-Frame Support Only, HRT 1 6O (5"Center)SUP6 A-Frame Support Only, HRT 210 (6"Center)SUP9 A-Frame Support Only, HRT 310 (9"Center)SUP5XP A-Frame Support, Plain Bearing, for HRT 210M/HS-1R (6"Center)SUP5XR A-Frame Support, Needle Bearing, for HRT 210M/HS-1R (6"Center)20-4333 A-Frame Support for HRT 210 w/Half Plain Bearing20-4334 Riser Block for HRT 21 OM

Accessory Cables

EXT17 Motor Extension Cable, 1O ft.CA1417 Cable Adaptor, 14 pin control to 1 7 pin rotaryCA1714 Cable Adaptor, 17 pin control to 14 pin rotary

Interfaces

CNC Extra CNC Interface Cable, 15 ft. • • •RQS Remote Quill Switch • • •C N C 3 O Extra C N C Interface Cable, 3 O f t . . . .CNC-VF1 CNC Interface Cable for Haas Machines • • •

'Use live center only (not provided).2 Not available for HRT210SP. ST5C only. "HRT210M only. 'HRT A5 only. 'HRT A6 only. 'Not compatible with AC brushless models. All prices subject to change™

HRT210 HRTA5/A6 HRT310 HRT 450 HRT 600 T5C, 2,3,4 TRT160,210 HRT210SHS

i\- ttat prior notice. 15% restocking charge on all returns/exchanges.

General Definitions. Terms & Conditions

Accuracy Critical Alignments

Accuracy is measured in an unloaded condition without

any attachments. Important note! User's fixtures, size and

weight of part, off-center parts, outboard supports,

tailstock pressures, off-center axis drilling and milling,

inadequate or uneven fixture mounting surfaces, out of

alignment (TIR) tailstocks or supports, etc., will all affect your

indexing accuracy results.

Customer Modifications

The customer assumes all responsibility for modifications.

Your warranty is void if you disassemble the motor covers or

remove any portion of the worm, spindle or related parts. We do

not recommend that customers adjust backlash, as this is

extremely critical to the life of the unit. Customers who install

chucks and air collets assume all responsibility for damage done.

We highly recommend having these devices installed by Haas.

Torque RatingsQuoted torque is peak torque for short durations only. Units

that have high duty cycles (>50%) cannot sustain peak torque.

Excessive torque demands are usually the result of an undersized

table, excessive tailstock pressure or misaligned end supports.

Alignments of outboard supports to the indexing device are

critical. Alignments must be within a maximum 0.005" TIR. If the

runout of the part is greater, or if the tailstock support is not

centered to the table axis, you are in effect bending the part.

This requires substantial energy and causes indexing inaccuracy

as well as substantially reducing the life of the indexing device.

Fixture and parts should not exceed one-half the weight of the

unit without tailstock.

Responsibility

The user is solely responsible for properly sizing the rotary

table to the work required. A good rule of thumb is that the

working size of the part should not exceed the diameter of the

worm gear. Working outside this dimension requires significantly

fewer feeds and loads. Another rule is that the part and fixture

should not exceed one-half the weight of the indexing device

without tailstock.

Warranty — 12-monthLimited Warranty

All warranty work is provided at Haas Automation, Inc., in

Oxnard, California. The user is responsible for first obtaining an

RMA number, and then returning the unit to Haas. We will return

the unit, freight pre-paid, via ground service. Allow 10 working

days for repairs. Faster turn-around is available at additional cost.

> Specifications subject to change without notice.

www.HaasCNC.com

28OO Sturgis Road, Oxnard, CA 93O3O

Phone: 805-278-18OO

Fax: 805-278-8540

Going On-Line at www.HaasCNC.com

Online Rotary Table Calculator

You can find online help choosing the correct Haas rotary

table to fit your needs by going to www.HaasCNC.com. Click

through to the rotary table area in the products category.

Follow the instructions and answer a few simple questions about

your manufacturing requirements. The Haas online rotary

calculator will make a number of product suggestions based on

your needs. Then, you can explore the suggested product's

capabilities and specifications.

Find Your Rotary Distributor

To find your local Haas rotary and CNC machine tool

distributor online, go to www.HaasCNC.com, click on the dealer

network category and follow the instructions. You will find the

Haas world-wide, factory-authorized CNC distributor network

and a USA-specific zip code quick-find search option.

Contacting Haas Automation

To contact Haas Automation directly, call 1-800-331-6746

and ask for inside sales. Our sales assistants will answer all your

questions and direct you to your local Haas rotary and CNC

machine tool distributor. Alternately, you can contact Haas at:

Phone: 805-331-6746

Fax: 805-278-8540

Mail: 2800 Sturgis Road, Oxnard, CA 93030 - USA

The All-New Haas Website

Wouldn't it be great to have a salesman available

24 hours a day? To have your most detailed questions

answered instantly? To get an accurate price quote that

includes the latest promotions?

At HaasCNC.com you can have all this and more.

Our new website provides all the information that

is important to YOU. What you need, when you want it,

all online.

ft•лиг

IP'i,,.,**

Haas Automation, Inc.2800 Sturgis Road • Oxnard, California • 93030

Toll Free: 800-331-6746 Fax: 805-278-8540

www.HaasCNC.com

01.07.0200