H1/H3/H7/H8/H9/H11/HB3/HB4/HI2

Technical Assistance

H4

Product Specification

36W

DC12-24V

6000 Lumens (3000 x 2)

4000 Lumens (2000 x 2)

IP65

CREE XHP50 / LUMILED

5700 Kelvin

Aviation aluminium 6063

>30000hrs

-40°C ~+80°C

Input Power

Operating Voltage

Luminous Flux (Cree)

(Lumiled)

IP Rating

Light Source Model

Colour Temperature

Heat Dissipation

Operating Life

Operating Temperature

Ultra Compact Heat SinkIf you need assistance setting up or using your product now or in the future, call Aerpro Support.Australia

TEL: +61 3 8587 8898FAX: +61 3 8587 8866

Mon-Fri 9am – 5pm AEST

Please retain this user guide for future reference.

For help with installation go to www. or scan the QR codehttps://aerpro.com/products/LED_Headlights

www.aerpro.com

PRODUCT MANUAL1 2

3 4

5 6

1 2

3 4

1 2

3 4

5 6

www.aerpro.com

H1/H3/H7/H8/H9/H11/HB3/HB4/HI2

1 2

3 4

5 6

Can be secured to vehicle withcable ties, screws or 3M tape

(not included)

Check orientation/polarity of connectors

Can be secured to vehicle withcable ties, screws or 3M tape

(not included)

Check orientation/polarity of connectors

NOTE: These LED Headlight globes come pre-aligned to match the factory globes of most vehicles. If adjustment is required, rotate the globe in the collar or use allen key provided for alignment.

or models with adjustable collar, remove and lock in position before installing LED & check LED alignment LED Alignment

Dual Beam LED Alignment

Head light front view

LED beam points left & right

Re�ector points up to match factory globe

Not up & down

Can be secured to vehicle withcable ties, screws or 3M tape

(not included)

Check orientation/polarity of connectors

Trouble ShootingPlease check the list below to help with problem solvingor before contacting our technical department.

Fault Procedure

1. Check all connections, condition & orientation2. Check vehicles fuses3. Try both LED’s and regulators in the kit4. Replace the factory OEM bulbs and check they work to isolate a problem with the LED’s