Upload
dangdang
View
217
Download
0
Embed Size (px)
Citation preview
I N S T R U C T I O N M A N U A L
VHF MARINE RADIO
GX600D
PRINTED IN ENGLISH INTERNATIONAL: USA : FCC ID : TXJGX600DCANADA : IC 7332A-GX600DAUSTRALIA:
0168 !
24 pp folded once to 148 x 210 mm stitched with 2 wires
Print CMYK on 130 gsm gloss art
WARNING: SAFETY INFORMATION
The GX600D is a radio transmitting device.
• Whentransmitting,keepanypartofyour headorbodymorethan1.5mfrom theantenna.
• Donottransmitnearelectricalblastingequipmentorinexplosiveatmospheres.
• Donotallowchildrentooperatearadiotransmitterunsupervised.
INTERNATIONAL CUSTOMERS
Localrequirementswillvarythroughouttheworldwithregardtooperatorqualification,DSCregistrationand MMSIallocations.
Internationalcustomersshouldrefertothismanualforcontactdetailstoobtainspecificrequirementsforyourcountry.
OPERATING RULES
Priorities
•Readallrulesandregulationspertainingtoprioritiesandkeepanup-to-datecopyhandy.Safetyanddistresscallstakepriorityoverallothers.
•YoumustmonitorChannel16whenyouarenotoperatingonanotherchannel.
•Falseorfraudulentdistresscallsareprohibitedunderlaw.
Privacy
•Informationoverheardbutnotintendedforyoucannotlawfullybeusedinanyway.
•Indecentorprofanelanguageisprohibited.
Radio Licenses
Ship Station License
WhenyourcraftisequippedwithaVHFFMradio,youmusthaveacurrentradiostationlicencebeforeusingtheradio.Itisunlawfultooperateashipstationwhichisnotlicensed.
InquirethroughyourdealerortheappropriategovernmentagencyforaShip-Radiotelephonelicense.Thislicenseincludesthecallsignwhichisyourcraft’sidentificationforradiopurposes.
Operators License
ArestrictedRadiotelephoneOperatorPermitisthelicensemostoftenheldbysmallvesselradiooperatorswhenaradioisnotrequiredforsafetypurposes.
TherestrictedRadiotelephoneOperatorPermitmustbepostedneartheradioorbekeptwiththeoperator.Onlyalicensedradiooperatormayoperatearadio.
However,non-licensedindividualsmaytalkoveraradioifalicensedoperatorstarts,supervises,endsthecallandmakesthenecessarylogentries.
Acurrentcopyoftheapplicablegovernmentrulesandregulationsisonlyrequiredtobeonhandforvesselsinwhicharadiotelephoneiscompulsory.However,evenifyouarenotrequiredtohavetheseonhanditisyourresponsibilitytobethoroughlyacquaintedwithallpertinentrulesandregulations.
SAFETYINFORMATION..........................................................2
INTERNATIONALCUSTOMERS..............................................2
OPERATINGRULES...............................................................2
INTRODUCTION...................................................................3
FEATURES............................................................................3
OPERATORQUALIFICATIONS................................................3
DIGITALSELECTIVECALLING................................................3
MARINEMOBILESERVICEIDENTITY.....................................3
RANGE................................................................................4
OPERATION.........................................................................4
DIGITALSELECTIVECALLING(DSC)......................................8
CONFIGURATIONMENU...............................................14-19
CONNECTINGAGPSRECEIVER..........................................19
INSTALLATION...................................................................20
SPECIFICATIONS.................................................................22
WARRANTY........................................................................23
CONTENTS
PAGE2 INSTRUCTIONMANUAL GX600D
GX600D INSTRUCTIONMANUAL PAGE3
INTRODUCTION
Congratulations.YouhavejustpurchasedoneofthemosttechnicallyadvancedVHFmarineradiosintheworld.
The GME GX600D is a VHF FM radio designed to operate in the 156 - 163 MHz marine band.
TheGX600DhasanumberofenhancedfeaturesincludingfullyuserprogrammableChannelScanning,DualWatchandTripleWatchfunctions,aprogrammable‘Instant’channelmemoryandadjustablebacklighting.InadditionitincorporatesDigitalSelectiveCallingandsupportspositionreportingwhenconnectedtoaGPSreceiver.
WithitscompactsizeandIP67designitcaneasilybeinstalledintoalmostanypanelmountinglocationinyourflybridgeorcabin.
TheGX600DistotallydesignedatourGladesvillefacility.Precisionrobotsandtheverylatestmanufacturingtechniquesensureaconsistentlyhighqualityismaintainedresultinginacommunicationssystemofextremereliabilityandperformance.
PleasereadthismanualthoroughlytoensureyougetthebestfromtheGX600D’sfeatures.
FEATURES
• CompactIP67Design
• SelectableInternational,USA,andCanadianChannelSets
• GPSpositiondisplaywhenconnectedtoaGPS
• FullyCompliantClass‘D’DigitalSelectiveCalling
• SeparateDSCReceiver
• SelectableUSAWeatherChannels
• DualWatchandTripleWatchwithProgrammable PriorityChannel.
• 10PrivateChannelsavailable
• ProgrammableChannelScanning
• SelectablePower25/1Watt
• WorkingChannelMemory
• AdjustableDigitalSquelchsetting
operatorsmaychoosetoobtainaMarineRadioOperatorsCertificateofProficiency(MROCP),whichcoverstheoperationofbothVHFandMF/HFequipment.
ManyTAFEsandmarineorganisationsoffercoursesleadingtoexaminationfortheMROVCPandMROCPalthoughsuchcoursesarenotcompulsory.PersonswishingtoobtaintheMROVCPorMROCPshouldfirstpurchaseacopyoftheMaritimeRadioOperatorHandbookwhichisessentialreadingforeveryboatownerinAustralia.
TheAustralianMaritimeCollege(AMC)providesthemarineexaminationandcertificateserviceonbehalfoftheACA.TheAMCcanprovidethedetailsoforganisationsandindividualsofferingcoursesandorconductingexams. Forfurtherinformationvisit:www.amc.edu.au
DIGITAL SELECTIVE CALLING (DSC)
TheDigitalSelectiveCalling(DSC)featureonyourGX600Dusespreformatteddigitaldatamessagesinsteadofvoicetotransmiturgentorimportantinformationtoanotherradio.DSCalertsallradioswithinrangetoadistressmessageevenwhenalisteningwatchisnotbeingmaintained. Thisincreasesthechancesofyoursignalbeingheard.
DSCispartoftheGlobalMaritimeDistressandSafetySystem(GMDSS)whichisexpectedtoeventuallyreplacelisteningwatchesondistressfrequenciesandwillbeusedtoannounceallroutineandurgentmaritimesafetyinformationbroadcasts.
DSC AND GPS
DSCoperationisenhancedbytheadditionofaGPSreceiverorchartplotterconnectedtoyourGX600D. WhenaGPSisconnected,yourdistresscallcanautomaticallyincludeyourcurrentpositionandtime,whileachartplotterwillallowyoutodisplaythepositionofanothervessel.IfaGPSisnotconnected,DSCcallscanstillbesentandreceivedtoalerttheoperatorofanothervesselforsubsequentvoicecommunication.
MARINE MOBILE SERVICE IDENTITY (MMSI)
TheMMSIisa9-digitnumberusedtoidentifyaradiothatiscapableofusingDSC.Thenumberisusedtoselectivelycallothervessels.
TosetupandusetheDSCfeatureonyourradio: Pleaserefertothe‘DigitalSelectiveCalling’sectionon page8ofthismanual.
NOTE: Youcanstillreceivedistresscallswithouta userMMSI.
OPERATOR QUALIFICATIONS
AnypersoninAustraliaoperatingaVHFmarineradioshouldpossessatleastaMarineRadioOperatorsVHFCertificateofProficiency(MROVCP).Alternatively,
PAGE4 INSTRUCTIONMANUAL GX600D
OPERATION
CONTROLS
Channel Channel LCD Volume Down Up Display
Scan
Microphone
Speaker
DSCDistress Channel16 Channel Hi/Low DualWatch/ Squelch AMemory Power TripleWatch
USER MMSI
TousetheDSCfeatureyoumustberegisteredwiththeappropriatelicensingauthority(AMSAinAustralia)whowillissueyouwithyouruniqueuserMMSInumber.YoucanthenenterthisintoyourGX600DtoenableDSCoperation.HavingaregistereduserMMSImeansyoucanbeidentifiedmuchquickerinanemergency.
YourGX600DisshippedfromthefactorywithoutauserMMSInumber.ItisuptotheusertoobtainavalidMMSIfromtheappropriatelicensingauthorityandentertheMMSIintotheradiotoenableDSCoperation.
GROUP MMSI
TheGroupMMSIisusedforDSCGroupCalls.AGroupCallprovidesamethodforallvesselswithacommoninterest(eg:ayachtcluborafishingfleet)tobecontactedwith
oneDSCcall.GroupMMSI’sareusuallyissuedbyaclubororganisationforusebymembersparticipatingingroupactivities(suchasyachtracingetc).
RANGE
TherangeofVHFtransmissionsdependsonantennaheight,transmitterpowerandtheterrainoverwhichthesignalspass.Shiptoshipcommunicationsshouldbepossibleoveratleast8nauticalmilesanduptoabout27nauticalmiles.Shiptoshorerangeswilloftenbegreaterduetotheincreasedheightoftheshoreantennaandcommunicationsof25to50nauticalmilesarepossible.
DISPLAY MICROPHONE
Transmit Indicator
Low Power
Busy Indicator
DualWatch Indicator
Scan Memory
Channel Display
DisplayMatrixKeyLockChannel Extender
TripleWatch Indicator
Call
Alphanumeric Keypad
Menu/ EnterKey
Clearkey
Downkey
Upkey
Keylockkey
PushtoTalk
(Optional MC540)
Call
Clearkey
Downkey
UpkeyPushtoTalk
MC516
GX600D INSTRUCTIONMANUAL PAGE5
VOLUME ON/OFF
Rotatethevolumecontrolclockwisepastthe‘click’toturntheGX600DON.YouruserMMSIisdisplayedmomentarilyatswitch-on.Whilereceivingasignal,continuetorotateclockwisetoincreasethesoundinthespeaker.Rotatethecontrolfullycounterclockwisepastthe‘click’toturntheGX600DOFF.
NOTE: Atminimumvolumesettingthereisstillsufficientvolumetobeheardinaquietcabinenvironment.
CHANNEL SELECTION
Standard Marine Channels
Brieflypressthe keytostepupwardsonechannelorthe keytostepdownwardsonechannel.Ahighbeepwillbe
heardateachpress.The or keysarealsoduplicatedonthefrontofthemicrophone.
Press and hold the or keysfor1.5secondstoscrollquicklyupwardsordownwardsthroughthechannelsat arateof10channelspersecond.Whenthekeyisreleasedchannelscrollingstops.
Weather Channels
TheUSweatherchannelsareavailableonlywhenthe USAChannelSethasbeenselected.Whenavailable,weatherchannelsarenumbered01–10andareinsertedintothenormalchannelsequencebelowmarinechannel01.Theyareselectedintheusualwayusingthe or keys.WeatherchannelsareidentifiedbytheWXicononthedisplay.
Private Channels
Upto20privatechannelscanbeprogrammedintotheGX600Dfororganisationsthathavebeenofficiallyallocatedspecialfrequencies.PrivatechannelsareprogrammedonapplicationbyyournearestGMEbranchoffice.AllrequestsforprivatechannelprogrammingmustbesupportedbyACMA(AustralianCommunicationsandMediaAuthority)documentation.
IfprivatechannelshavebeeninstalledtheywillappearasA0–A9andB0–B9aboveCH88.
SQUELCH
To open the squelch:
BrieflypresstheSQLkey.Alowbeepwillbeheardandthesquelchwillopen.BrieflypresstheSQLkeyagaintoclosethesquelch.Ahighbeepwillbeheardandthesquelchwillberestoredtoitspresetlevel.
Setting the Squelch Preset Level:
Thepresetsquelchlevelcanbeadjustedtosuitlocalconditions.Ifyouareinanelectricallynoisylocationorunwantedweaksignalskeepopeningthesquelch,you
canadjustthesquelchsettingsothattheGX600D remainsquiet.Notethatincreasingthepresetsquelch levelwillmeanthatstrongersignalswillberequiredto overcomethesquelchandmayresultinmissedcalls fromweakersignals.
Thebestsettingistheminimumonerequiredtokeepthereceiverquiet.
To enter the Squelch setting mode:
Press and hold the SQLkeyfor1.5secondsuntilahighbeepisheard.Thepresentsquelchsettingwillbedisplayedindigitsfrom-1to-9with-1beingminimumand-9beingmaximumsquelch.Thedefaultsettingis-2.Whileinthismode,brieflypressthe or keystoincreaseordecreasethesquelchlevelrespectivelyasrequired.BrieflypresstheSQLkeyagaintoexitthesquelchsettingmodeorwait 5secondsanditwillexitautomatically.Alowbeepwill beheard.
Keylock (Optional MC540 microphone only)
Tolockthekeypadpressandholdthe keyontheMC540microphone.Ahighbeepwillbeheardandthe
symbolwillbedisplayed.Pressandholdthe keyagaintocancelthekeylockfunction.
Whilekeylockisenabled,onlythePTT, ,SQL, 16 and DISTRESSkeysareaccessible.Allotherkeys arelocked.
Pressing 16willcancelthekeylockandreverttoChannel16onhighpower.
Pressing DISTRESSwillcancelthekeylockandactivate thedistressmenu.
TRANSMITTING
To Transmit:
Press the Push to Talk (PTT)switchonthemicrophone.Holdthemicrophoneabout5-8cmfromyourfaceandspeakatanormalvoicelevel.Themicrophoneisquitesensitivesoitisnotnecessarytoraiseyourvoiceorshout.ReleasethePTTwhenyouhavefinishedtalking.
NOTE: PTTtransmissionsaredisabledonChannel70.
Time-out Timer
Excessivetransmissiontimeiscontrolledbyatime-out timer.IfthePTTisheldformorethan5minutes,thetransmitterwillbetemporarilydisabledtopreventaccidentaljammingofthechannelfrequency.Tensecondsbeforethetimeoutoccurs,the‘TX’iconwillflashandalowwarningbeepwillsoundtonotifyyouoftheimpendingtimeout.Oncethetimeoutoccurs,boththebacklightandthe‘TX’iconwillflashandanotherlowwarningbeepwillbeheard.Atthistimethetransmitterisdisabled.
To reset the timer and re-enable the transmitter:
ReleasethePTTswitchandwait10seconds.Duringthistimetheradiowilldisplay‘TXINHIBITEDFOR10SECS’.
NOTE: EvenifthePTTswitchisreleasedduringthe10secondwarningperiod,thePTTwillstillbeinhibitedfor 10 seconds after the PTTisreleased.
CHANNEL 16
Brieflypressthe16keytoswitchstraighttoChannel16.Allpreviouscontrolsettings(suchasscanningorlowtransmitterpower)willbecancelledandtheradiowill be restored to normal operation with high transmit powerselected.
SELECTING CHANNEL SETS
TheGX600DisprogrammedwiththreeChannelSets-International,USAandCanada.TheseChannelSetssupportvariouschannelandfrequencyallocationsforotherpartsoftheworld.OnceyouhaveselectedtherequiredChannelSetforyourlocation,youshouldnotneedtochangeitagainunlessyouhavemovedtoanothercountry.
When using the GX600D in Australia:
TheInternationalChannelSetshouldbeselected.
To change the Channel Set:
PleaserefertotheConfigurationMenuSetuponpage17 ofthismanual.
DISPLAY BACKLIGHTING/ CONTRAST
TheLCDdisplayisbacklitforeasyviewingatnight.Thebrightnessandcontrastofthebacklightingcanbeadjusted.Backlightsettingsareaccessedthroughthemenu.Fordetailsonsettingthedisplaybrightnessorcontrastpleaserefer to the ConfigurationMenuSetuponpage16ofthismanual.
TRANSMIT POWER
TheGX600DhasbothHigh(25Watt)andLow(1Watt)transmitterpowersettings.Forlongrangetransmissionsthepowershouldbesetto25Watts.Forlocaltransmissionsa 1Wattsettingwillconservepowerandreduceinterferencetonearbyradios.Thedefaultsettingis25Watts.
To switch between High and Low transmitter power:
Brieflypressthe25/1Wkey.AhighbeepindicatesHighpower is selected while a low beep indicates Low power isselected.WhenLowpowerisselected‘LO’isdisplayed.
NOTE: TheradioalwaysdefaultstoHighpowerwhenChannel16isselected.
• SelectingChannel16usingthe16keywillresetALLchannelstoHighpower.
• SelectingChannel16usingthe or keysresetsonlychannel16toHighPowerbutretainsanyLowpowersettingontheotherchannels.
• TospecificallyuseLowpoweronChannel16,selectchannel16thenbrieflypressthe25/1Wkeytoselectlowpower.‘LO’willbedisplayed.
WORKING CHANNEL MEMORY
TheGX600Dhasadedicated‘workingchannel’memorycalledChannelAwhichallowsyoutostoreandrecallanoften-usedworkingchannel.Thememoryisaccessedusingthe CHAN Akey.ChannelAisalsousedastheprioritychannelfortheTripleWatchfunction(seepage7).
To Store a Frequency into Channel A:
Selecttherequiredchannelusingthe or keys, then press and hold the CHAN Akeyfor1.5seconds. Thechannelnumberwillflashthenahighbeepwill beheardasthechannelisstored.
To Recall Channel A:
BrieflypresstheCHAN Akeytoswitchimmediatelytothechannelstoredinthatmemory.Iftheradiowasscanningthescanwillbecancelled.
DUAL WATCH KEY (DW)
TheDualWatchfunctionisa2channelscanfeaturewheretheGX600DswitchesbetweenChannel16andanyotherselectedchannel.ThisallowsyoutomonitoraworkingorclubchannelwhilestillbeingabletoreceiveimportantbroadcastsonChannel16.
To use the Dual Watch function:
Selectyourpreferredworkingchannel-eitherwiththe or keysorbyselectingtheCHAN Amemory-then
brieflypresstheDWkey.Ahighbeepwillbeheardandboth‘DW’and‘CH16’willappearonthedisplaytoindicateyouareDualWatchingtheselectedchannelwithChannel16.TheGX600DwillnowmonitortheselectedchannelANDChannel16byalternatingequallybetweenthem.Duringthistimethechanneldisplaywillremainontheselectedchannel.
To cancel Dual Watching:
BrieflypresstheDWkeyagain.
DUAL WATCH FEATURES
If a signal appears on Channel 16:
TheradiowillswitchimmediatelytoChannel16and‘16’willbedisplayed.AtthispointtheselectedchannelisnolongerbeingmonitoredbecauseChannel16haspriority.
PAGE6 INSTRUCTIONMANUAL GX600D
GX600D INSTRUCTIONMANUAL PAGE7
DuringthistimethePTTmaybepressedfornormaltransmissionsonChannel16.Oncechannel16hasbecomeinactivefor5secondstheDualWatchfunctionwillresume.
If a signal appears on the selected channel:
ScanningwillpauseontheselectedchannelBUTChannel16willcontinuetobemonitoredevery2seconds.Duringthis time the PTTmaybepressedfornormaltransmissionsontheselectedchannel(notethatmonitoringofChannel16ceaseswhiletransmitting).Oncetheselectedchannelhasbecomeinactivefor5secondstheDualWatchfunctionwillresume.
To Transmit on the selected Channel while Dual Watching:
SimplypressthePTT.TheDualWatchfunctionwillpauseontheselectedchannelduringthetransmissionandremainpauseduntil5secondsafterallactivityhasceasedonthechannel.DualWatchwillthenresume.
To Transmit on Channel 16 while Dual Watching:
Press the 16keytoselectChannel16.DualwatchwillbecancelledandtheradiowillswitchstraighttoChannel16.NowpressthePTTandtransmitintheusualway. Whenyourconversationhasended,presstheDWkey toresumeDualWatching.
To change the selected Channel while Dual Watching:
Simplyselectanotherchannelusingthe or keys.DualWatchingcontinuesonthenewlyselectedchannel.
TRIPLE WATCH KEY (TW)
TheTripleWatchfunctionisanextensionoftheDual Watchfeature.ItallowstheGX600DtomonitorChannel16,aselectedchannelANDaprioritychannel.Each channelisscannedequallyforsignalswithprioritygivenfirsttoCH16,thenthePrioritychannelandlastlytheselectedchannel.
WhenTripleWatchisselectedthe‘TW’iconisdisplayedalongwithChannel16,theselectedChannelandthePriorityChannel.The‘Priority’Channelistheonestored intheCHANAmemory.
To use the Triple Watch mode:
Firstprogramyourprioritychannel(thedefaultprioritychannelis9)intotheCHANAmemory,thenselectyourpreferredworkingchannelusingthe or keys. NowpressandholdtheTWkeyfor1.5secondsuntil ahighbeepisheard.‘TW’andtheselectedchannel willbedisplayedalongwithCH16andthePriority Channelnumber.
To change the selected channel at any time:
Press the or keys.
To cancel Triple Watch
BrieflypresstheTWkeytoswitchtoDualWatchmode. A high beep will be heard
OR Press and hold the TWkeytoreturntonormaloperation. Alowbeepwillbeheard.
TRIPLE WATCH FEATURES
If a signal appears on Channel 16:
TheradiowillswitchimmediatelytoChannel16and ‘CH16’willbedisplayed.Atthispointtheselected channelandthePrioritychannelarenolongerbeingmonitoredbecauseChannel16hashighestpriority.Duringthis time the PTTmaybepressedfornormaltransmissionsonChannel16.OnceChannel16hasbecomeinactivefor 5secondstheTripleWatchfunctionwillresume.
If a signal appears on the Priority channel:
ScanningwillpauseonthePrioritychannelBUTChannel16willcontinuetobemonitoredevery2seconds(theselectedchannelisnotmonitored).DuringthistimethePTTmaybepressedfornormaltransmissionsonthePrioritychannel(monitoringofChannel16ceaseswhiletransmitting).OncethePrioritychannelhasbecomeinactivefor5secondsTripleWatchwillresume.
If a signal appears on the selected Channel:
ScanningwillpauseontheselectedchannelBUTchannel16andthePrioritychannelwillcontinuetobemonitoredevery2seconds.DuringthistimethePTTmaybepressed for normal transmissions on the selected channel (monitoringofchannel16andthePrioritychannelceaseswhiletransmitting).Oncetheselectedchannelhasbecomeinactivefor5secondstheTripleWatchwillresume.
To Transmit on the selected Channel while Triple Watching:
SimplypressthePTT.TheTripleWatchfunctionwillpauseduringthetransmissionandremainpauseduntil5secondsafterallactivityhasceasedonthechannel.TripleWatchwillthenresume.
To Transmit on the Priority channel while Triple Watching:
Brieflypressthe CHAN A.TripleWatchiscancelledandthePrioritychannelwillbecometheselectedchannel.Nowpress the PTTandtransmitintheusualway.Whenyourconversationhasended,re-selectyourselectedchannel.
To Transmit on Channel 16 while Triple Watching:
Press the 16key.TripleWatchwillbecancelledand theradiowillswitchstraighttoChannel16.NowpressthePTTandtransmitintheusualway.Whenyourconversationhasended,pressandholdtheTWkeytoresumeTripleWatching.
SCANNING
TheScanfunctionallowstheGX600Dtoscanthroughaseriesofuserselectedchannelslookingforactivity.Scanningisdoneinanascendingsequenceatarate of10channelspersecond.
Channels can be selected and stored for scanning from anyoftheavailablechannels,includingweatherchannels (iftheUSAchannelsetisselected)andprivatechannels (iftheyareenabled).
NOTE: Thetransmitterisdisabledwhilescanning.IfthePTTispressed,alowbeepwillbeheardandthePTTisignored.
To store Channels for Scanning:
Selecttherequiredchannelusingthe or keys,thenpress and hold the SCANkeyfor1.5seconds.Ahigh beepwithbeheardand‘M’willappearnexttothe channelnumber.
Repeattheprocesstoremoveapreviouslystoredchannelfromthescanlist.Whenachannelisremovedalowbeepisheardand‘M’disappearsfromthedisplayonthatchannel.
To begin Scanning:
BrieflypresstheSCANkey.TheGX600Dwillscanupwardsthroughthestoredchannelsat10channelspersecondandthedisplaywillshowrapidlychangingchannelnumbers.Ifasignalislocated,scanningwillpauseonthatchannelandwillremainfor5secondsafterthesignalhasgone.Scanningwillthenresume.
To Stop the Scan:
BrieflypresstheSCANkeyagain.Theradiowillreturntothelastselectedchannel.
SCANNING FEATURES
If the scan is paused on a busy channel and you wish to remain on that channel:
BrieflypresstheSCANkey.Scanningwillbecancelledandtheradiowillremainonthatchannel.Toresumescanning,brieflypresstheSCANkeyagain.
If the scan is paused on a busy channel and you wish to skip over that channel:
BrieflypresstheSCANkeytwice.Scanningwillresumewiththenextchannelinsequence.
If the scan is paused on a busy channel and you wish to transmit on that channel:
SimplypressthePTTswitch.Scanningwillbecancelled andtheradiowillremainonthatchannel.
NOTE: ifthePTTispressedatanyothertimewhilescanning,alowbeepwillbeheardandthePTTwill beignored.
To switch immediately to Channel 16:
Brieflypressthe16key.Channel16willbeselected,scanning will be cancelled and the radio will be restored tonormaloperationwithhightransmitterpowerselected.
To switch immediately to the stored working channel (CHAN A):
BrieflypresstheCHAN Akey.Scanningwillbecancelledand the radio will switch to the channel stored in the CHANAmemory.
Scanning Notes:
1.Eachchannelsethasitsownindependentscanmemory.E.g.ScanchannelsstoredundertheInternationalchanneldonotaffectthosestoredundertheUSAchannelset.
2.Aminimumof2channelsisrequiredinthescanmemorybeforescanningisallowed.Iftherearelessthat2channels,pressingtheScankeywillgivealowbeep andthescanwillbeignored.
3.Thefollowingkeys/functionsaredisabledwhilescanning: •PTT •25/1W •Scanmemorystorage • and keys
Scanning with Dual Watch:
IfDualWatchisselectedwhilescanning,Channel16 willbeinsertedintothescaneveryfifthchannel.
Scanning with Triple Watch:
IfTripleWatchisselectedwhilescanning,Channel16andtheprioritychannel(storedintheCHANAmemory)willbothbeinsertedintothescaneveryfifthchannel.
DIGITAL SELECTIVE CALLING (DSC)
DigitalSelectiveCalling(DSC)usesdigitaldatatoprovideautomaticdistressalertingandpositionreportingbetweenDSCequippedradios.Usingpresetfunctionsbuiltintotheradio,youcanmakearangeofautomateddigitalcallsincludingDistressCalls,AllShipsandGroupCallsaswellascallstoindividualradios.WiththeadditionofaGPSyou
PAGE8 INSTRUCTIONMANUAL GX600D
GX600D INSTRUCTIONMANUAL PAGE9
canalsosendyourpositiontoanothervesselorrequesttheirposition.DSChasanumberofadvantagesovervoicecallsincludingtheabilitytohandleincreasedradiotrafficandtheautomaticidentificationofyourshipanditspositionintheeventofanemergency.
DSCispartoftheGlobalMaritimeDistressandSafetySystem(GMDSS)andwilleventuallyreplaceaudiblelistening-watchesondistressfrequencies.Itwillalsobeusedtoannounceroutineandurgentmaritimesafetyinformationbroadcaststoothershipsinthearea.
DSCcallsaresentandreceivedonCH70.TheGX600D hastworeceivers,oneofwhichisdedicatedtoCH70.Therefore,regardlessofwhichchannelyouareoperatingon,theGX600DwillnotmissaDSCcall.
USER MMSI (MARINE MOBILE SERVICE IDENTITY)
AUserMMSIisa9-digitnumberusedtoidentifyaDSCcapableRadio.ThenumberisusedtoselectivelycallothervesselsandisissuedbyyourlocalMaritimeAuthority(AMSAinAustralia).
NOTE: BeforeyoucanuseDSC,youmusthaveenteredyourUserMMSInumberintoyourGX600D.Ifyoudon’tyethaveaUserMMSI,pleaseregisterwithyourlocalMaritimeAuthoritywhowillthenissueauniqueMMSInumber.PleaserefertotheUserMMSIsectionoftheConfigurationMenuonpage19ofthismanualforinstructionsonenteringyourUserMMSI.
DISTRESS CALLS
To make a DSC Distress Call:
AlwaysusetheRedDISTRESSbuttonontheGX600D’sfrontpanel.TomakeanyotherDSCcall,usetheCALL buttononthemicrophone.
MAKING A DISTRESS CALL:
1.OpentheRedDISTRESScover.
2.BrieflypresstheDISTRESSkey.Thedisplayshowsthe‘Natureofdistress’Menulist.
3.Usethe or keystoselectthenatureofthedistress.Thelistincludes:Undefined,Fire,Flooding,Collision,Grounding,Listing,Sinking,Disabled,Abandoning,PiracyandManOverboard.
4.Withthecorrectdistressitemselected,pressandholdthe DISTRESSkeyfor5seconds.Thedisplaywillflashandtheradiowillcountfrom5downto1,beepingateachcount.
NOTE:Tocancelthedistresscall,releasetheDISTRESS keybeforethecountdowniscompleted.TheradiowillreturntonormaloperationonCH16.
5.Whenthecountdowniscomplete,theDISTRESScallwillbesentonChannel70(whetherCH70isbusyornot).Afterthedistresscallissent,theradioswitchestoCH16andthedisplayshows‘DISTRESS’and‘WaitAck…’toindicate it is now in the distress mode and is waiting for anacknowledgementfromanotherradio.
Whileindistresscallmode,theGX600DissetonCH16andtheusercannotchangechannels.ThekeysonthemicrophonearedisabledandallfrontpanelkeysexceptforSQLaredisabled.IfthePTTispressed,theradiotransmitsonCH16onHIpower.
Ifanacknowledgementisnotreceived,thedistresscallwillberesentataround4minuteintervals(whetherCH70isbusyornot)–foraslongastheradioremainsinthedistresscallmode.
NOTE: A distresscallcanalsoberesentimmediatelyatanytimebyholdingtheDISTRESSkeyagainfor5seconds.
ThedistresscallmodeiscancelledwhenaDISTRESSACKNOWLEDGEisreceivedorthe16keyispressed. TheradiothenreturnstonormaloperationonCH16.
NOTE: ADistressAcknowledgeresponseisgenerallysentbyacoastalbasestation.
RECEIVING A DISTRESS CALL
When a Distress Call is received:
IfAutochannelintheSetupMenuistoONtheGX600DswitchestoCH16andgeneratesanaudibleDistressAlertalarm.
IfAutoChannelissettoofftheGX600Dwillask“settoCH16?”presstheCALLbuttontoacceptandswitchtoCH16orpressthe– keytostopthealarmandremainonthecurrentchannel.
Theradio’sdisplaythenalternatesbetweenthenameandpositionofthevesselindistressandthetimeandnature oftheemergencyat3secondintervals:
Press the –keytocancelthealarmbutcontinuedisplayingtheemergencyinformation.
DISTRESS: WAIT ACK . . .
DISTRESS: SIRIUS S 45° 23.48’ E 151°21.14’
Name & Position of Vessel
DISTRESS: LISTING 05:32 UTC
Nature of Distress & Time
Press the –keyagaintoreturntoNormaloperatingmodeonCH16.
MAKING ALL OTHER DSC CALLS
AllotherDSCcalls-apartfromdistresscalls-aremadeusingtheCALLbuttononthemicrophone.
DSC MENU NAVIGATION
To access the DSC Call menu:
Press the CALLbuttononthemicrophone.The‘CALL’MenuwillbedisplayedprovidingarangeofDSCcalloptions.
To navigate the Call Menu:
Press the or keystomoveupordownthroughtheavailablemenuoptions.
Press the CALL buttontoselectthecurrentmenuselection.
Press the –keytoquitthecurrentmenuselection.
Press the –keyagaintoexitthe‘CALL’menuandreturn tonormaloperation.
NOTE: AtanytimeinDSCmode,includingDistressCalls,pressthe16keytocancelDSCmodeentirelyandreturn theradiotonormalmodeonHIpower.
DSC CALL MENU OPTIONS
Individual Calls:
Usethe‘IndividualCall’optiontoalertaspecificvesselthatyouwishtocommunicatewiththemonaspecifiedchannel.Ifthecalledvessel’sradioisonadifferentchannel,theirradiowillchangetothechannelyouspecify.
NOTE:TomakeanindividualDSCcallyoumustknowtheMMSIofthevesselyouarecalling.
To make an Individual Call:
1. PresstheCALL button.TheDSCCallmenuwillbedisplayed.
2. Select‘INDIVIDUAL’andpresstheCALL button.TheMMSInumberfieldwillbedisplayed.
3. Enterthevessel’sMMSInumber
Youcaneither;
i.Pressthe keytoretrievethelastcalledMMSI or
ii.Pressthe keytoselectavessel’sMMSIfromtheAddressBook or
iii.Manuallyenterthevessel’sMMSIasfollows; a.PressandholdtheCALL buttontoentertheEDIT
mode.
b.Usethe or keystoenterthefirstdigitoftheUserMMSInumber.
c.PresstheCALL buttontomovetothenextdigitposition.Repeatuntilall9digitshavebeenentered.
NOTE: Tocorrectanerrorduringentry,presstheCALL buttonrepeatedlytomovethecursorpositiontotheincorrectdigitthenusethe or keystochangethedigitatthatlocation.
4. OncethecorrectMMSIhasbeenenteredorselected,press the CALL button.‘SELECTCHNL’isdisplayed.
5. Selectthechanneltobeusedforvoicecommunicationusingthe or keysthenpresstheCALL button.
6. ‘SENDCALL’isdisplayed.PresstheCALL button tosend.
NOTE: IfyouarecallingaCoastStationyouwillnotbeaskedtoselectachannel.InsteadtheCoastStationwilldecidethechanneltobeused.
Oncethecallhasbeensent,theradiowillwaitforanacknowledgement.Ifanacknowledgementisreceivedtheradiodisplays.
Press the –key(orwaitafurther5seconds)fortheradio toreturntoNormalmode.Youcannowhavenormalvoicecommunicationsontheselectedchannel.
If NO Acknowledgement is received:
Itislikelythatthevesselyoucalledisswitchedofforoutofrange.Ifnoresponseisreceivedwithin5secondstheradiodisplays:
Press the –key(orwaitafurther5seconds)fortheradiotoreturntoNormalmode.
PAGE10 INSTRUCTIONMANUAL GX600D
CALL FROM: SIRIUS ACKNOWLEDGE
CALLING . . . SIRIUS NO REPLY
CALL > INDIVIDUAL
ALL SHIPS GROUP
SEND CALL MMSI:
SEND CALL? SIRIUS
CALL SIRIUS: SELECT CHNL
GX600D INSTRUCTIONMANUAL PAGE11
If an acknowledgment is received but the other radio is unable to comply:
Thisindicatesthecalledvessel’sradiohasreceivedandacknowledgedyourcall,butcouldnotchangetotherequestedchannel.Thiscouldmeanthecalledvessel’sradioisconfiguredformanualreplyorisinamodewheretheoperatordoesnotwantthechanneltochange.
Theradiodisplays:
Press the –key(orwaitafurther5seconds)forradiotoreturntoNormalmode.
ALL-SHIPS CALL
AnAll-ShipscallisaDSCbroadcasttoalertallshipsinthearea.ItistheequivalenttosendingaPAN-PANorSECURITEvoicecall.SincethecallistoAllShipsandnottoanindividualvessel,acallingMMSIisnotrequired.ShipsreceivinganAll-ShipscallwillchangetoCH16.
To make an All Ships call:
1. PresstheCALL button.
2. Select‘ALLSHIPS’andpresstheCALL button.
3. Select‘URGENCY’or‘SAFETY’asappropriateandpressthe CALL button.
4. Theradiowilldisplaythe‘SELECTCHNL’optionbutwilldefaulttoChannel16automatically.
5. Ifanotherchannelisrequiredusethe or keystoselectanalternatechannel,otherwisepresstheCALL buttontouseChannel16.
6. ‘SENDCALL?’‘ALLSHIPS’willbedisplayed.
7. PresstheCALL buttontosendthecall.
TheradioreturnstoNormalmodeonChannel16(oryouralternativeselectedchannel)assoonasthecallhasbeensent.
NOTE: ThereisnoDSCacknowledgetoanAllShipscall.
GROUP CALL
AGroupCallisusedtocontactallshipsthathavethesameGroupMMSI.AllshipsreceivingaGroupcallwillchangetothespecifiedchannel.Forexamplethiscouldbeused toalertallyachtsinaracetoannounceachangeinthe raceconditions.
To make a Group Call:
1.PresstheCALLbutton
2.Select‘GROUP’andpresstheCALLbuttonagain.TheGroupMMSIusedistheoneprogrammedintoyourradio(seeConfigurationMenu).
3.SelectchanneltobeusedforsubsequentcommunicationsthenpressCALL.
4.‘SendCALL?Group’isdisplayed
5.PressCALL again to send the call
TheradioreturnstoNormalmodeontheselectedchannelassoonasthecallhasbeensent.
NOTE:ThereisnoDSCacknowledgetoaGroupcall.
POSITION REQUEST
APositionRequestisusedtoobtainthepositionofanothervessel.Theothervessel’spositionisdisplayedonyourradio’sLCD.IfyouhaveachartplotterconnectedtotheGX600D,thepositionoftheothervesselcanalsobedisplayedonthechartplotter’sscreen.
To make a Position Request:
1. PresstheCALLbutton
2. Select‘POS REQUEST’ then press the CALLbutton
3. EnterthevesselsMMSI.
Youcaneither;
i.Press the keytoretrievethelastcalledMMSI or
ii.Press the keytoselectavessel’sMMSIfromtheAddressBook or
CALL FROM: SIRIUS ACKNOWLEDGE NOT COMPLY
CALL INDIVIDUAL ALL SHIPS > GROUP
CALL GROUP SELECT CHNL
CALLING . . . GROUP
SEND CALL? GROUP
CALL INDIVIDUAL > ALL SHIPS GROUP
ALL SHIPS > URGENCY
SAFETY
CALL ALL SHIPS SELECT CHNL
SEND CALL? ALL SHIPS
iii.Manuallyenterthevessel’sMMSIasfollows;
a.PressandholdtheCALLbuttontoentertheEDITmode.
b.Usethe or keystoenterthefirstdigitofthevessel’sMMSInumber.
c.PresstheCALLbuttontomovetothenextdigitposition.Repeatuntilall9digitshavebeenentered.
NOTE:Tocorrectanerrorduringentry,presstheCALL buttonrepeatedlytomovethecursorpositiontotheincorrectdigitthenusethe or keystochangethedigitatthatlocation.
4.OncethecorrectMMSIhasbeenenteredorselected,press the CALLbutton.‘SENDCALL’isdisplayed.
5.PresstheCALLbuttontosend.
Position Request Responses
If NO acknowledgement is received: Itislikelythatthevesselyoucalledisswitchedofforout ofrange.Ifnoresponseisreceivedwithin5secondstheradiodisplays:
Press the –key orwaitafurther5secondsfortheradiotoreturntoNormalmode.
If an acknowledgement is received: Thedisplaywillalternatebetweenpositionandtimeasshownbelow.ThepositionisdisplayedontheLCDasLat/LonginDegrees,MinutesandDecimalMinutes.IfaChartplotterisattached,thepositionisalsosenttotheChartplotterandappearsontheChartplotter’sdisplay.
NOTE: IftheradioyouarecallingdoesnothaveaGPSconnectedortheGPSsignalisnotvalid,theGPSpositiondatawillbeinvalid.Inthatcase,thepositionusedwillbethemanuallysetposition.Ifthemanualpositionhasnotbeensetorhasn’tbeenupdatedwithin23hours,thenpositiondataissentas:‘N99`99E999’99’toindicatepositiondataisinvalid.WhenthisisreceivedontheGX600Ditwillbedisplayedas: Press the –key(orwait5seconds)fortheradiotoreturntoNormalmode.
The called radio cannot comply: Thecalledvessel’sradiohasreceivedyourrequest,butcouldnotsendit’sposition.Thiscouldmeanthecalledvessel’sradioisconfiguredformanualreply,orisinamodewherePositionRequestsaredenied(see‘PositionReply’settingonpage17intheConfigurationMenu). Press the –keyorwaitafurther5secondsfortheradiotoreturntoNormalmode.
Position Send
‘PositionSend’isusedtomanuallysendYOURpositiontoanothervessel.Forexample,anothershipmayrequestyourpositionusingvoicecommunications.Insteadofspeakingthelatitudeandlongitudeoveravoicechannel,youcansendyourpositionviaDSCwhichcanthenbedisplayed ontheothership’sradioordirectlyontotheirchartplotter’sscreen.
To send a ‘Position Send’ Call:
1. PresstheCALLbutton
2. Select‘POSSEND’thenpresstheCALLbutton
3. EnterthevesselsMMSI.
Youcaneither; i.Pressthe keytoretrievethelastcalledMMSI or ii.Pressthe keytoselectavessel’sMMSIfromthe
AddressBook or iii.Manuallyenterthevessel’sMMSIasfollows; a.PressandholdtheCALLbuttontoenterthe
EDITmode.
PAGE12 INSTRUCTIONMANUAL GX600D
CALLING . . . SIRIUS NO REPLY
CALL FROM: SIRIUS POSITION 01:35 UTC
Displays time in UTC
CALL FROM: SIRIUS S 33° 49.30’ E 151° 07.15’
Displays Position
CALL FROM: SIRIUS POSITION _ _:_ _ UTC
CALL FROM: SIRIUS S _ _° _ _._ _’ E _ _ _° _ _. _ _’
CALL ALL SHIPS GROUP > POS REQUEST
SEND CALL MMSI:
CALLING . . . SIRIUS
CALLING . . . SIRIUS NO REPLY
GX600D INSTRUCTIONMANUAL PAGE13
b.Usethe or keystoenterthefirstdigitofthevessel’sMMSInumber.
c.PresstheCALLbuttontomovetothenextdigitposition.Repeatuntilall9digitshavebeenentered.
NOTE: Tocorrectanerrorduringentry,presstheCALL buttonrepeatedlytomovethecursorpositiontotheincorrectdigitthenusethe or keystochangethedigitatthatlocation.
4. OncethecorrectMMSIhasbeenenteredorselected,press the CALLbutton.‘SENDCALL’isdisplayed.
5. PresstheCALLbuttontosend.
TheradioreturnstoNormalmodeonthecurrentchannel assoonasthecallhasbeensent.
NOTE: ThereisnoDSCacknowledgementofa‘PositionSend’call.
RECEIVING DSC CALLS
WhenaDSCcallisreceived,theGX600Dautomaticallyrespondsdependingonthetypeofcall.IfaGPSisconnectedtothecaller’sradioandisreceivingavalidsignalthentheirGPStimeisusedtodisplaythetimeofthecallonyourGX600D’sdisplay.
ReceivedcallsaresavedtotheCallLog.ReceivedDSCAcknowledgecallsarenotsavedinthecalllog.
Receiving an Individual Call
Whenan‘Individual’callisreceived,theGX600Dchangestotherequestedchannel(if‘AutoCHNL’ison)andgeneratesanaudible‘IndividualCall’alarm.Thedisplaythenshows:
YourGX600DautomaticallytransmitsaDSCacknowledgebacktothecaller.
NOTE: IftheGX600DisconfiguredforManualTXtheradiowillnotchangechannelandtheacknowledgecallwillbe‘Unabletocomply’.
Tocancelthealarm,pressanykey.Theradioreturnsto‘Normal’modeonthecurrentchannel.
Receiving an All Ships Call
WhenanAllShipscallisreceived,theGX600DswitchestoCH16andgeneratesanaudibleAll-ShipsUrgency/Safetyalarm.TheDisplayshows:
Pressanykeytocancelthealarm.TheradioreturnstoNormalmodeonCH16.
Receiving a Group Call
WhenaGroupCallisreceived,theGX600Dchangesto therequestedchannel(if‘AutoCHNL’ison)andgeneratesanaudibleGroupCallalarm.
Thedisplayshows:
Pressanykeytocancelthealarm.TheradioreturnstoNormalmodeonthecurrentchannel.
Receiving a Position Request
WhenaPositionRequestisreceived,yourGX600DgeneratesaDSCPositionReplymessagethendisplays thefollowing:
Pressanykeytoclearthedisplay.TheradioreturnstoNormalmodeonthecurrentchannel.
Receiving a Position Send
WhenaPositionSendisreceived,yourGX600Ddisplaysalternatinginformationevery3secondstoindicatethe GPStimeandthepositionofthecallingvessel:
CALL FROM: SIRIUS ROUTINE CH12
GROUP CALL: SIRIUS CH12
CALL FROM: SIRIUS POSITION REQ
CALL FROM: SIRIUS POSITION 01:35 UTC
GPS Time of Calling Vessel
CALL FROM: SIRIUS S 33° 49.30’ E 151° 07.15’
Position of Calling Vessel
CALL INDIVIDUAL POS REQUEST > POS SEND
SEND CALL MMSI:
CALLING . . . SIRIUS
ALL SHIPS: SIRIUS URGENCY
IfachartplotterisconnectedtoyourGX600D,thepositionofthecallingshipisdisplayedonthechartplotter.
Pressanykeytoclearthedisplay.TheradioreturnstoNormalmodeonthecurrentchannel.
CONFIGURATION MENU
TheGX600Diseasilyconfiguredusingamenusystem.Themenuallowsaccesstothefollowingoptions:
• Address Book:Add,EditandErasefrequentlycalledstationsinyouraddressbook
• Call Log:Keeptrackofincomingcallsandreturncallsrecordedinthelog.CallsarecategorisedseparatelyasRoutineorDistressforeasyidentification.
• Display:Changeyourdisplay’sbrightnessandcontrast.
• Setup:Adjustkeybeepsandalarmvolumesettings,selectthechannelband,addnamestochannels,configureDSCresponseparametersandselectNMEAbaudrates.
• GPS Setup:EnterLat/Long,UTCtimeandtimeoffsetandconfigureGPSdisplayandalertstatus.
• MMSI:EnteryourUserandGroupMMSIcodes.
USING THE MENU
NOTE: ThefollowingdescriptionappliestotheMC516microphonesuppliedwithyourGX600D.IfusingtheoptionalMC540keypadmicrophonepleaseusethealternativekeysasshowninthetablebelow.
For all menu items,firstpresstheVolumeknobtoaccessthemainmenu.Onceyouareinthemainmenu,mostfunctionscanbeaccessedfromthemicrophone.
• Usethe or keysonthemicrophone(orradio)toscrollthroughthevariousmenuoptions.Selectedmenuitemsareprefixedwith‘>’.
• PresstheCALLbuttononthemicrophone(ortheVolumeknobontheradio)toacceptyourselection.
• Pressthe–keyonthemicrophonetoquitthecurrentselectionorpressrepeatedlytoexitthemenucompletely.
• Whenenteringcharactersusethe or keystoselectthe character then press the CALLbuttontomovetothenextcharacterposition.
MENU OPTIONSADDRESS BOOK
TheaddressbookisusedtostorethenamesanduserMMSI’sofothervessels.ThismakesiteasytoidentifyincomingDSCcallsandtomakeDSCcallstothosestations.
To select the Address Book:
1. Fromthemainmenu,pressthe or keystoselect‘ADDBOOK’
2. PresstheCALLbuttontoaccept.
ThefollowingAddressBookoptionsareavailable
• ADD
• EDIT
• ERASE
To ADD a contact to the Address Book:
1. Select‘ADD’fromtheAddressBookmenuandpresstheCALLbutton.‘Name’isdisplayed.
2. Usethe or keystoselectthefirstcharacterofyourcontact’sname.PresstheCALLbuttontomovetothenextcharacterposition.
3. Repeatstep2untilallrequiredcharactershavebeenentered.Upto11charactersareavailable.
4. Whenfinished,pressandholdtheCALLbuttontoconfirm.‘MMSI’isthendisplayed.
5. Usethe or keystoenterthefirstdigitofyourcontact’sMMSInumber.PresstheCALLbuttontomovetothenextdigitposition.
6. Repeatstep5untilalldigitshavebeenentered.
7. PressandholdtheCALLbuttontoconfirmandstorethecontactintotheaddressbook.
NOTE: TocorrectanerrorwhileenteringanameorMMSI:
1. BrieflypresstheCALLbuttonrepeatedlytomovethecursortothecharacteryouwishtoedit.Thecharacteratthecursorpositionwillflash.
2. Tochangethecharacteratthecursorposition,pressthe or keys.
3. Todeleteacharactertotheleftofthecursorposition,press the –key.
PAGE14 INSTRUCTIONMANUAL GX600D
FUNCTION MC516 MC540
Select/Enter Call/Volume Menu/Enter
Clear/Quit – Clear
Up
Down
EnterCharacters or Alpha/numerickeypad
GX600D INSTRUCTIONMANUAL PAGE15
To EDIT a contact stored in the Address Book:
1. Select‘EDIT’fromtheAddressBookmenuandpresstheCALLbutton.Alistofstorednamesisdisplayed.
2. Pressthe or keystoscrolltothedesirednamethenpress the CALLbuttontoselectit.TheNameandMMSIoftheselecteditemisdisplayedwiththeflashingcursorpositionedonthefirstcharacter.
3. ToedittheName,brieflypresstheCALLbuttonrepeatedlytomovethecursortothecharacterthatrequiresediting.Thecharacterwillflash.
4. Pressthe or keystochangethecharacterin thatposition.
5. Todeleteacharacterimmediatelytotheleftofthecursorposition,pressthe–key.
6. ToedittheMMSInumber,pressandholdtheCALL button.ThecursorwillmovetotheMMSInumber.
7. RepeattheprocessabovetoedittheMMSInumber asrequired.
8. Whenfinished,pressandholdtheCALLbuttontosavetheentryandreturntotheAddressBookmenu.
ERASING CONTACTS
To ERASE a single contact from the Address Book:
1. Select‘ERASE’fromtheAddressBookmenuandpressthe CALLbutton.
2. Select‘One-By-One’andpresstheCALLbutton.
3. Usethe or keystoselecttherequirednamethenpress the CALLbutton.‘EraseEntry?’isdisplayedalongwiththenameandMMSIofthecontact.
4. PresstheCALLbuttontoconfirmdeletionorpressthe– keytocancel.
To ERASE ALL contacts from the Address Book:
1. Select‘ERASE’fromtheAddressBookmenuandpressthe CALLbutton.
2. Select‘AllEntries’andpresstheCALLbutton.
3. ‘EraseAllAddBook?’isdisplayed.PresstheCALL buttontoconfirmorpressthe–keytocancel.
CALL LOGS
ThecalllogkeepstrackoftheDSCcallsyouhavereceived.DSCcallsareloggedaseitherRoutineorDistress.Upto10callscanbeloggedineachcategory.Loggedcallsarenumbered1–10withcall1beingthemostrecent.Ifmorethan10callshavebeenloggedtheoldestcallisdiscardedwhenanewcallislogged.
Viewing the Call Logs:
1. Select‘CALLLOG’fromthemainmenuandpresstheCALLbutton.
2. Selecteither‘ROUTINE’or‘DISTRESS’fromtheCallLogmenuandpresstheCALLbutton.
3. Themostrecentlyloggedcallwillbedisplayedas‘RECEIVED:1’alongwiththeMMSIofthecaller anddetailsofthecall.Ifthecallerisinyouraddressbook,theirnamewillbedisplayedinplaceofthe MMSInumber.
4. Pressthe or keystoviewadditionalloggedcalls.
To call a station listed in the Call Log:
1. Whentherequiredloggedcallisdisplayed,brieflypressthe CALLbutton.
2. Usethe or keystoselecttherequiredchannelifprompted.
3. PresstheCALLbutton.‘SendCall?’Isdisplayed.
4. PresstheCALLbuttonagaintosendthecall.
NOTE: Youcanalsocallstationsfromthecalllogusingthe‘Call’optioninthesubmenu(describedbelow).
CALL LOG SUBMENU
Whiledisplayingthedetailsofaloggedcall,brieflypressthe Volumeknobtoaccessadditionalsubmenuoptionsrelatingtothedisplayedcall.Thefollowingsubmenuoptionsareavailable
• Call
• AddADDR
• Erase
To Call a station listed in the Call Log (alternate method):
1. Whentherequiredloggedcallisdisplayed,presstheVolumeknobtoaccessthesubmenu.
2. Select‘Call’thenpresstheCALLbutton.
3. Usethe or keystoselecttherequiredchannelifprompted.
4. PresstheCALLbutton.‘SendCall?’Isdisplayed
5. PresstheCALLbuttonagaintosendthecall.
To Add the listed caller to your Address Book:
1. Select‘ADDADDR’fromtheAddressbookmenuandpress the CALLbutton.Youwillbepromptedtoenteranameforthisentry.
2. Enterthenameusingthe or keystoselecteachcharacter then press the CALLbuttontomovetothenextcharacterposition.
3. WhenfinishedpressandholdtheCALLbutton.TheMMSIwillbeautomaticallytransferredfromthecalllisttotheAddressEntrypage.
4. PressandholdtheCALLbuttonagaintoconfirmandstorethenewcontactintheaddressbook.‘Saving’willbedisplayedastheaddressisstored.
To Erase The Displayed Entry From The Call Log:
1. Select‘Erase’fromtheAddressbookmenuandpresstheCALLbutton.‘EraseEntry?’isdisplayed
2. PressandholdtheCALLbuttontoconfirm.
To Erase all Logged Calls:
1. Select‘EraseLogs’fromtheAddressbookmenuandpress the CALLbutton.‘EraseAll?’isdisplayed.
2. PressandholdtheCALLbuttontoconfirm.
DISPLAY
Toconfigurethedisplay,selectthe‘DISPLAY’optionfromthemainmenu.ThefollowingDisplayoptionsareavailable
• Backlight
• Contrast
Backlight Adjustment
1. Toadjustthedisplay’sbacklighting,select‘Backlight’fromtheDisplaymenuthenpresstheCALLbutton.
2. Usethe or keystoselect‘OFF’,‘DIM’or‘BRIGHT’.Thedisplaychangesimmediatelywitheachselection.
3. PresstheCALLbuttontoaccepttheselection.
Contrast
1. Toadjustthedisplay’scontrast,select‘Contrast’fromtheDisplaymenuthenpresstheCALLbutton.
2. Usethe or keystoadjustthecontrastsothatthedisplayiseasilyreadable.Thecontrastwillchangewitheachkeypressandareferencevaluefrom-20to+20willbedisplayed.Thecontrastsettingisdependentonyourviewinganglesowerecommendyouadjustthecontrastfromyournormalviewingposition.
3. PresstheCALLbuttontoaccepttheselection.
SETUP
TheSetupmenuconfiguresthegeneraloperationoftheradio.ThefollowingmenuisdisplayedinSetup
• KeyBeep
• AlarmBeep
• AutoChannel
• PosReply
• IndivReply
• UIC
• ChnlName
• NMEA-1
• NMEA-2
Key Beep
Changesthevolumeofthebeepsthatareheardwhenthekeysarepressed.
Tochangethekeybeepvolume;
1. Select‘KEYBEEP’fromtheSetupmenuthenpresstheCALLbutton.
2. Usethe or keystosettheBeepvolumeto‘HI’,‘MED’,‘LOW’or‘OFF’.
3. PresstheCALLbuttontoaccepttheselectionandreturntothe‘SETUP’Menu.
Alarm Beep
ChangesthevolumeoftheAlarmbeeps.
Tochangethealarmvolume;
1. Select‘ALARMBEEP’fromtheSetupmenuthenpressthe CALLbutton.
2. Usethe or keystosettheAlarmBeepvolumeto‘HI’,‘MED’or‘LOW’.
3. PresstheCALLbuttontoaccepttheselectionandreturntothe‘SETUP’Menu.
NOTE: TheEmergencyAlarmvolumeisalwayssettoHighandisnotaffectedbythisadjustment.
Auto Channel
AutoChanneldefineswhetheryourradiowillchangechannelsautomaticallywhenrequestedbyanothervessel’sDSCcall.
1. Select‘AUTOCHNL’fromtheSetupmenuthenpresstheCALLbutton.
2. Usethe or keystosettheAutoChannelfeaturetoONorOFF.
–Select‘ON’toallowyourradiotochangechannelswhenrequestedbyanincomingDSCcall.
–SelectOFFtoignoreincomingchannelchangerequestsfromDSCcallsandremainontheselectedchannel.
3.PresstheCALLbuttontoaccepttheselectionandreturntothe‘SETUP’Menu.
PAGE16 INSTRUCTIONMANUAL GX600D
GX600D INSTRUCTIONMANUAL PAGE17
Position Reply
ThePositionReplyfunctiondetermineswhetheryourradiowillautomaticallysenditsGPSpositiontoanothervesselwheneveraPositionRequestisreceived.(TousethisfeatureyourGX600DmusthaveaGPSconnectedoramanualGPSpositionmusthavebeenentered).
1. Select‘POSREPLY’fromtheSetupmenuthenpresstheCALLbutton.
2. Usethe or keystoselect‘Auto’or‘Manual’.
–Select‘Auto’toallowyourpositiontobesentautomaticallywhenrequestedbyanincoming DSCcall.
–Select‘Manual’todisableautomaticpositionsending.
3. PresstheCALLbuttontoaccepttheselectionandreturntothe‘SETUP’Menu
Individual Reply
TheIndividualReplyfunctiondetermineswhetheryourradiowillautomaticallyacknowledgeanincomingIndividualCall.
1. Select‘INDVREPLY’fromtheSetupmenuthenpresstheCALLbutton.
2. Usethe or keystoselectMANUALorAUTO.
–Select‘AUTO’toallowyourradiotoautomaticallysendanacknowledgewhenanIndividualDSCCallisreceivedfromanotherstation.
–Select‘MANUAL’topromptyoutorespondmanuallytoanIndividualDSCCall.Inthismodeyourradiowilldisplay‘REPLYOK?’andawaityourresponse.
3.PresstheCALLbuttontoaccepttheselectionandreturntothe‘SETUP’Menu.
UIC (USA/International/Canadian)
SelectstheradiofrequencychannelsetusedbytheGX600D.Becausechannelallocationsvarybetweencountriesyoushouldusethechannelsetforthecountryyouareoperatingwithin.TheradiosupportsInternational,USAandCanadianchannelsets.ThedefaultsettingisInternational.
1. Select‘UIC’fromtheSetupmenuthenpressthe CALLbutton.
2. Usethe or keystoselect‘CAN’(Canada),‘USA’ or‘INTL’(International).
3. PresstheCALLbuttontoaccepttheselectionand returntonormaloperation.
WhenevertheChannelSetischanged,theGX600DwillswitchtoCH16.
NOTE: WhentheUSAChannelSetisselected,weatherchannelswillbeaccessiblebelowChannel01.
Channel Name
UsetheChannelnamefunctiontoapplyusefulnames tochannelstohelpidentifytheirusage(e.g.aclub/ workingchannel).
1. Select‘CHNLNAME’fromtheSetupmenuthen |press the CALLbutton.
2. Usethe or keystoselectthefirstcharacterof yourchannelname.
3. PresstheCALLbuttontomovetothenext characterposition.
4. Repeatuntilallrequiredcharacters(upto11) havebeenentered.
NOTE: Tocorrectanerrorwhileenteringthechannelname,press the CALLbuttonrepeatedlytomovethecursortotherequiredcharacterposition,thenusethe or keystocorrectthecharacterinthatposition.
5. Whenfinished,pressandholdtheCALLbutton toconfirm.
NMEA-1 Baud/NMEA-2 Baud
Usethisoptiontoadjustthebaudrate(datacommunicationsspeed)oftheGX600D’sNMEAserialdataports.TheGX600DhastwoserialportslabelledNMEA-1andNMEA-2.TheBaudratesofeachportcanbesetindependently.Notethatthebaudrateyouchoosemustmatchthatofthedevice/syouareconnecting.
1. Select‘NMEA-1Baud’or‘NMEA-2Baud’fromtheSetupmenuthenpresstheCALLbutton.
2. Usethe or keystoselectfrom4800,9600,19200or38400baud.
3. Whenfinished,pressandholdtheCALLbuttontoconfirmandreturntonormaloperation.
GPS Setup
TheGPSsetupallowsyoutomanuallysetGPSpositioncoordinatesandtimeparametersforsituationswhereyourGX600DdoesnothaveaGPSconnectedandcannot obtainthisinformationautomatically.YoucanalsoconfigureGPSdisplayandalerts.ThefollowingmenuisdisplayedinGPSSetup.
• Position
• UTCTime
• TimeOffset
• GPSDisplay
• GPSAlert
POSITION
Allowsmanualentryofthelatitudeandlongitudeofyourvessel’slocation.ThisallowstheDSCfunctiontotransmityourpositioncoordinatesinanemergency.ThepositionmustbeenteredinDegrees,MinutesandDecimal/Minutes(DMM).
To enter your position
1. Select‘POSITION’fromtheGPSMenuthenpresstheCALLbutton.
2. Usethe or keystoselect‘N’(North)or‘S’(South).
3. PressandholdtheCALLbutton.ThecursormovestothefirstdigitpositionoftheLatitudefield.
4. Usethe or keystoselectthefirstdigitoftheLatitudethenbrieflypresstheCALLbuttontomovetothenextdigitposition.
5. Repeatuntilalldigitshavebeenentered.
6. PressandholdtheCALLbuttontoconfirmandstoretheLatitude.ThecursorwillmovetotheLongitudefield.
7. Usethe or keystoselect‘E’(East)or‘W’(West)then press and hold the CALLbutton.ThecursormovestothefirstdigitpositionoftheLongitudefield.
8. Usethe or keystoselectthefirstdigitoftheLongitudethenbrieflypresstheCALLbuttontomovetothenextdigitposition.
9. Repeatuntilalldigitshavebeenentered.
10.Whenfinished,pressandholdtheCALLbuttontoconfirmandstoretheposition.
NOTE: Thepositionwillbeerasedafter23hoursorwhentheradioisswitchedoff.
UTC TIME
LetsyoumanuallysetthetimeinUTC(GreenwichMeanTime).ThetimeisenteredasHours:Minutes:Secondsin24hourtimeformat.
TO ENTER THE TIME IN UTC:
1. Fromthe‘GPSSETUP’menu,select‘UTCTIME’thenpress the CALLbutton.TheHourscursorwillbeflashing.
2. Usethe or keystoselectthehoursthenpresstheCALLbutton.TheMinutescursorwillflash.
3. Usethe or keystoselecttheminutesthenpressthe CALLbutton.TheSecondscursorwillflash.
4. Usethe or keystosetthesecondsthenpresstheCALLbutton.
Theradioreturnstothe‘SETUP’Menu.
NOTE: Thetimewillbeerasedafter23hoursorwhentheradioisswitchedoff.
TIME OFFSET
LetsyousetthetimedifferencebetweenUTCtimeandyourlocaltime.Thiswillallowtheradiotodisplaylocaltime.AlistofTimeoffsetsisinthebackofthismanual.
To set the Time Offset:
1. Fromthe‘GPSSETUP’menu,select‘TIMEOFFSET’thenpress the CALLbutton.
2. Usethe or keystosetthetimeoffsetfrom-12:00hrsto+13:00hrsin30minutesegments.
3. PresstheCALLbuttontoacceptandreturntothe‘GPSSETUP’Menu.
GPS DISPLAY
SelectswhetherornottodisplayyourGPSpositionontheLCD.IftheGPSdisplayin‘ON’butaGPSreceiverisnotconnected,‘NOGPS’isdisplayedinstead.
1. Fromthe‘GPSSETUP’menu,select‘GPSDISPLAY’thenpress the CALLbutton.
2. Usethe or keystoselect‘OFF’or‘ON’.
3. PresstheCALLbuttontoacceptandreturntothe‘GPSSETUP’Menu.
GPS ALERT
TheGX600DmonitorstheNMEAportsforGPSdataandcansoundanalarmiftheGPSpositiondataislostorisdisconnected.TheGPSAlertoptionhasthreesettings–OFF,ONandAUTO.
OFF–TheGPSAlarmisturnedoff.ValidGPSpositiondataappliedtotheNMEAportswillbeusedbytheGX600D butyouwillnotbealertedifthepositiondataislost.
ON–TheGPSalarmwillsoundiftherehasbeenno validGPSpositionfor30seconds.EithertheGPSpositionhasbeenlostoryourGPSdeviceisnotconnectedorswitchedon.
AUTO–TheGX600DwillautomaticallydetermineifaGPSdatasourceisconnectedandwillonlysoundthealarmifvalidGPSdatawasdetectedthenlost.Thisistherecommended(default)setting.
ToselecttheGPSAlertsetting
1. Fromthe‘GPSSETUP’menu,select‘GPSAlert’thenpress the CALLbutton.
2. Usethe or keystoselect‘OFF’,‘AUTO’or‘ON’.
3. PresstheCALLbuttontoacceptandreturntothe‘GPSSETUP’Menu.
PAGE18 INSTRUCTIONMANUAL GX600D
GX600D INSTRUCTIONMANUAL PAGE19
GROUP MMSI
AGroupCallprovidesamethodforcontactingmultiplevesselswithacommoninterestbyusingoneDSCcall.ThereisnolimitonthenumberoftimesyoucanchangetheGroupMMSI.
To enter the Group MMSI
1. Select‘GROUPMMSI’fromtheMainMenuthenpressthe CALLbutton.
2. Usethe or keystoenterthefirstdigitofthe‘GROUPMMSI’number.
3. PresstheCALLbuttontomovetothenextdigitposition.
4. Repeatuntilall9digitshavebeenentered.
5. Tocorrectanerrorduringentry,presstheCALLbuttonrepeatedlytomovethecursorpositiontotheincorrectdigitthenusethe or keystochangethedigitatthatlocation.
6. Whenfinished,pressandholdtheCALLbuttontoconfirmandreturntothemainmenu.
NOTE: IftheGroupMMSIfieldalreadyhasanMMSInumber,pressandholdthe–keytocleartheMMSIfield.YoucanthenenteranewGroupMMSInumber.
USER MMSI
TheUserMMSIisuniquetoeachradioandmustbeenteredtoenablenormalDSCoperation-exceptforthereceptionofdistresscallswhichdonotrequireauserMMSI.
TheGX600DisshippedfromthefactorywiththeuserMMSI‘un-programmed’.ItisuptotheusertoobtainavalidMMSIfromtheappropriatelicensingauthorityandentertheMMSIintotheradiotoenableDSCoperation.
IMPORTANT: ItisarequirementoftheregulationsthattheUserMMSIcanonlybeenteredONCE.IfthereisaneedtochangetheMMSImorethanonceyouwillneedtocontactyourauthorizedGMEservicecentreforadvice.ForthisreasontakespecialcarewhenenteringyourUserMMSInumbertoensureitisenteredcorrectlybeforesavingit.
To enter the 9 digit User MMSI number issued to you by your local authority:
1. Select‘USERMMSI’fromtheMainMenuthenpresstheCALLbutton.
2. Usethe or keystoenterthefirstdigitoftheUserMMSInumber.
3. PresstheCALLbuttontomovetothenextdigitposition.
4. Repeatuntilall9digitshavebeenentered.
5. Tocorrectanerrorduringentry,presstheCALLbuttonrepeatedlytomovethecursorpositiontotheincorrectdigitthenusethe or keystochangethedigitatthatlocation.
6. Oncethe9digitUserMMSIhasbeenentered,doublechecktoensurethatthenumberiscorrect then press and hold the CALLbuttontostoreit.Theradiowillreturntothemainmenu.
CONNECTING A GPS RECEIVER OR PLOTTER
YoucanconnectaGPSreceiverorGPSPlottertoyourGX600D.AGPSreceiverwillprovideyourradiowithGPSpositionandtimereporting.ConnectingaGPSplotterwillallowDSCpositionsofshipstobedisplayeddirectlyonyourplotter.GPSconnectionsaremadethroughtheNMEAportsonyourradio.
NMEA PORTS
TheGX600DfeaturestwoNMEAportslabelledNMEA1andNMEA2.Theseareavailableontherearpanel.NMEAsentencesgeneratedbytheGX600Dwillappearontheoutputofbothports.Inaddition,anyNMEAsentencesreceivedattheinputofoneportwillbemirroredattheoutputoftheotherport.
TheNMEABaudrateofeachportcanbesetseparatelyfromwithintheSetupmenu.AvailableBaudratesare4800,9600,19200and38400bps.
NMEA 0183 DATA
TheGX600DrecognisesthefollowingstandardNMEAsentences.YoumayneedtoselectNMEA0183Input/OutputusingtheinterfacesettingsonyourGPS,Plotterorconnecteddevice.
NMEAInputfromGPS:GPGLL,GPGAA,GPRMC, GPGNS(v2.x)
NMEAOutputtoplotter:GPDSC(v2.x)GPDSE(v3.x)
YellowBlue
Black
NMEAOutNMEAInCommon(Gnd)
GX600D INSTRUCTIONMANUAL PAGE20
INSTALLATION
NOTE: YourGX600Disdesignedforconnectiontonegativeearthelectricalsystemsonly.
Selecting a location
ItisadvisabletospendalittletimeselectingthebestlocationforyourGX600D.Themountingbracketcanberotatedabove,beloworbehindtheradioenablingtheradiotobemountedinawiderangeoflocations.Inaddition,usingtheoptionalflushmountingkits(MK600,MK001,MK002)theGX600Dcanbemounteddirectlyinapanelordashboard.TheflushmountingkitsallowforinstallationorreplacementofanyexistingVHFradio.
UPRIGHT OR OVERHEAD MOUNTING
Keepthefollowingpointsinmindwhenchoosingalocation.
• TheGX600DisdesignedtomeettheIP67specificationwhichallowsfordirectwaterspray.However,werecommendyouselectalocationthatwillminimiseexcessiveexposuretowatersplashesorcontinuousrain.
• Selectalocationthatwon’texposeyourradiotocontinuousdirectsunlightwhichcouldcauseoverheatingorUVdegradation.
• Ensurethatthelocationallowsafreeflowofairaroundtheheatsinkonthebackoftheradio.
• Themicrophoneandallcontrolsshouldbereadilyaccessibleandtheloudspeakereasilyheardfromthenormalsteeringposition.Anextensionspeaker(SPK600)canbeinstalledifrequired.
• Forbestresultsconnectthebatteryleadsdirectlytothevessel’sbattery.Ifyouneedtoextendthepowerleadstoreachthebatteryuseheavyinsulatedautomotivewireofatleast#10gauge.
• Componentsandcurrentsintheradiocreatemagneticfields.Toavoidinterferencetoshipscompassesorautopilotsensors,theGX600Dshouldbemountedatleast300mmfromsuchequipment.
INSTALLING THE UNIT
Afterchoosingyourlocation,holdtheunitwiththemountingbracketattachedintothedesiredpositionandmarkthelocationwithapencil.Removethemountingbracketfromtheradioanddrillthemountingholes.Boltorscrewthebracketinplaceusinghardwaresuitableforthemountingsurface.Theunitissuppliedwithstainlesssteelscrews;however,ifthemountingsurfaceisunsuitableforscrewsyoumayneedtoreplacethesewithstainlesssteelbolts.Rememberthefixingsforoverheadmountedunitsmayhavetowithstandheavypoundingwhenthevesselisinroughwaterorbeingtowedonatrailer.
Panel Overhead Upright Mounting Mounting Mounting
FlushMounting(OptionalMK600,MK001,MK002flushmountingkitsavailable)
GX600D INSTRUCTIONMANUAL PAGE21
Rear Panel Connections
GX600D Wiring
MountingBracket
NMEA1 NMEA2DCPowerCable ExtensionSpeakerSocket
ExtensionSpeaker SPK600(optional) VHFAntenna
10AmpFuse
Black- Red+
12VoltBatteryGX600D
GimbalKnob
AntennaSocket
DC Connections
ConnecttheREDpowerleadtothePositive(+)sideofthebatteryortoanaccessorypointinthevessel’sfusebox.
ConnecttheBLACKpowerleadtotheNegative(-)sideofthebatteryortoagroundpointinyourvessel’sfusebox.
NOTE: TheREDpowerleadisfittedwitha10Ampfuse. Ifthefuseblows,useonlyastandard10Amp(3AGtype)fuseasareplacement.Useofhigherratedfusesor‘slowblow’typescouldresultindamagetoyourradiowhichwouldvoidthewarranty.
ConnecttheantennacabletotherearantennasocketontheradiousingaPL259coaxialconnector.
Ifrequired,anSPK600extensionspeakermaybeinstallednearthesteeringpositionoroutsidethecabintoimprovethereceptionclarityinthoseareas.TheSPK600isspecificallydesignedfortheGX600Dwithawatertightconnectortomatchtheextensionspeakersocketontherearoftheradio.
Noise Suppression
TheinherentdesignofVHFFMradiosresultsinahighlevelofresistancetoignitionandelectricalinterference.Howeverinsomeinstallationsitmaybenecessarytotakeadditionalstepstohelpreduceoreliminatenoiseinterference.Duringinstallation,trytoroutetheDCbatteryleads,theantennaleadoranyaccessorywiresawayfromtheenginecompartment,ignitionoralternatorwiring.Ifthenoisecontinues,itmaybenecessarytofitasuppressionkit.Contactyourlocalmarinedealerformoreinformation.
Similarly,iftheinterferenceyouareexperiencingisfromotherelectronicequipmentsuchasadepthsounder,trytokeepthedepthsounder’sDCleadsandtransducercablewellawayfromyourGX600D’swiring.
GX600D INSTRUCTIONMANUAL PAGE22
ELECTRICAL
General
Complieswith: AS/NZS4415.1.2003 FrequencyRange: 155–165MHz ChannelSpacing: 25kHz Modulation: FM ChannelsSets: •International,USA,Canada •Private–20Channels •USAWeatherChannels SupplyVoltage: •12voltnominal •10.5–15.6voltmax.range •NegativeEarth FrequencyStability: ±1.5kHzoverenvironmental
extremes ScanSpeed: 100ms/channel
(10channels/sec)Transmitter
PowerOutput: •High:25wattsmax •Low:1wattmax SpuriousEmissions: <-75dBc FrequencyDeviation: ±5kHzmax+20dBlimiting
@1kHz FrequencyResponse: +6dBperoctave,
300Hz–3kHz,+1-3dB DemodulatedS/N: >50dBweighted CurrentConsumption: •HighPower:<5Amps •LowPower:850mAReceiver
IFFrequencies: •1st:21.4MHz •2nd:450kHz Sensitivity: -120dBmfor12dBSINAD
unweighted SquelchSensitivity: Adjustable,10presetlevels SpuriousRejection: >75dB Intermodulation Rejection: >73dB AdjacentChannel Rejection: >75dB BlockingRejection: >100dB RFBandwidth: <4MHz SwitchingBandwidth: >10MHz FrequencyResponse: -6dBperoctavede-emphasis,
300Hz–3kHz,+1-3dB AudioOutputPower: •4Wattsaverageintoexternal
4Ohmspeaker •2Wattsaverageintointernal
speaker AudioSN: >45dBweighted
ConductedSpurious Emission: <-70dBm CurrentConsumption: •Muted:<200mA •Fullvolume:700mA
DSC RECEIVER
IFfrequencies: •1st:38.85MHz •2nd:455kHz
(Note:allDSClimitsarefor10e-2BER) Sensitivity: -120dBm SpuriousRejection: >75dB Intermodulation Rejection: >73dB AdjacentChannel Rejection: >75dB BlockingRejection: >100dB
MECHANICAL
Dimensions: 164(W)x65(H)x77(D)mm FlushMounting: 46mmpaneldepthminimum Weight: 585grams
ENVIRONMENTAL
TemperatureRange: -10°Cto+55°C Vibration: MILSTD810E,
procedureI3.4.8 SolarRadiation: CaseUVstabilised WaterandDust Resistance: IP67excludingexternalcabling CompassSafeDistance: 300mm
EXTERNAL CONNECTIONS
Microphone: 6pinsocket DCSupply: 2pinsocket ExternalSpeaker: 3.5mmphonolinesocket NMEA1: 3wirecable NMEA2 3wirecable
SPECIFICATIONS
All specifications are typical and subject to change without notice or obligation.
GX600D INSTRUCTIONMANUAL PAGE23
STANDARD COMMUNICATIONS WARRANTY AGAINST DEFECTS
ThiswarrantyagainstdefectsisgivenbyStandardCommunicationsPtyLtdACN000346814(We,us,ourorGME).Ourcontactdetailsaresetoutinclause2.7.ThiswarrantystatementonlyappliestoproductspurchasedinAustralia.PleasecontactyourlocalGMEdistributorforproductssoldoutsideofAustralia.Localdistributordetailsatwww.gme.net.au/export.
1. Consumer guarantees
1.1 OurgoodscomewithguaranteesthatcannotbeexcludedundertheAustralianConsumerLaw.Youareentitledtoareplacementorrefundforamajorfailureandforcompensationforanyotherreasonablyforeseeablelossordamage.Youarealsoentitledtohavethegoodsrepairedorreplacedifthegoodsfailtobeofacceptablequalityandthefailuredoesnotamounttoamajorfailure.
1.2 Totheextentweareable,weexcludeallotherconditions,warrantiesandobligationswhichwouldotherwise beimplied.
2. Warranty against defects
2.1 Thiswarrantyisinadditiontoanddoesnotlimit,excludeorrestrictyourrightsundertheCompetitionandConsumerAct2010(Australia)oranyothermandatoryprotectionlawsthatmayapply.
2.2 Wewarrantourgoodstobefreefromdefectsinmaterialsandworkmanshipforthewarrantyperiod(seewarrantytable)fromthedateoforiginalsale(oranotherperiodweagreetoinwriting).Subjecttoourobligationsunderclause1.2,wewillatouroption,eitherrepairorreplacegoodswhichwearesatisfiedaredefective.Wewarrantanyreplacementpartsfortheremainderoftheperiodofwarrantyforthegoodsintowhichtheyareincorporated.
2.3 Totheextentpermittedbylaw,oursoleliabilityforbreach ofacondition,warrantyorotherobligationimpliedbylaw is limited
(a)inthecaseofgoodswesupply,toanyoneofthefollowingaswedecide–
(i) thereplacementofthegoodsorthesupplyofequivalentgoods;
(ii) therepairofthegoods; (iii)thecostofrepairingthegoodsorofacquiring
equivalentgoods; (b)inthecaseofserviceswesupply,toanyoneofthe
followingaswedecide– (i) thesupplyingoftheservicesagain; (ii) thecostofhavingtheservicessuppliedagain.2.4 Forrepairsoutsidethewarrantyperiod,wewarrantour
repairstobefreefromdefectsinmaterialsandworkmanshipforthreemonthsfromthedateoftheoriginalrepair.Weagreetore-repairorreplace(atouroption)anymaterialsorworkmanshipwhichwearesatisfiedaredefective.
2.5 Wewarrantthatwewillperformserviceswithreasonablecareandskillandagreetoinvestigateanycomplaintregardingourservicesmadeingoodfaith.Ifwearesatisfiedthatthecomplaintisjustified,andasoursoleliabilitytoyouunderthiswarranty(totheextentpermittedatlaw),weagreetosupplythoseservicesagainatnoextrachargetoyou.
2.6 Tomakeawarrantyclaimyoumustbeforetheendoftheapplicablewarrantyperiod(seewarrantytable),atyourowncost,returnthegoodsyouallegearedefective,providewrittendetailsofthedefect,andgiveusanoriginalorcopyofthesalesinvoiceorsomeotherevidenceshowingdetailsofthetransaction.
2.7 Sendyourclaimto:StandardCommunicationsPtyLtd. UnitB,22-24CollegeStreet,Gladesville,NSW2111,Australia.Tel:(02)98798888Fax:(02)98164722. Email:[email protected]
2.8 Ifwedeterminethatyourgoodsaredefective,wewillpayforthecostofreturningtherepairedorreplacedgoodstoyou,andreimburseyouforyourreasonableexpensesofsendingyourwarrantyclaimtous.
3. What this warranty does not cover
3.1 Thiswarrantywillnotapplyinrelationto: (a)goodsmodifiedoralteredinanyway; (b)defectsanddamagecausedbyusewithnonStandard
Communicationsproducts; (c) repairsperformedotherthanbyourauthorised
representative; (d)defectsordamageresultingfrommisuse,accident,
impactorneglect; (e)goodsimproperlyinstalledorusedinamannercontrary
totherelevantinstructionmanual;or (f) goodswheretheserialnumberhasbeenremovedor
madeillegal.4. Warranty period
4.1 WeprovidethefollowingwarrantyonGMEandKingrayproducts.Norepairorreplacementduringthewarrantyperiodwillreneworextendthewarrantyperiodpasttheperiodfromoriginaldateofpurchase.
PRODUCT TYPE WARRANTY
PERIOD
VHFmarinetransceivers 1year
FITTING INSTRUCTIONS
NEW INSTALLATION
1. Select a convenient location in the dashboard or bulkhead. Minimum area required is 96 mm (h) by 212 mm (w). Make sure there is sufficient space behind to accommodate the body and leads without fouling any electrical wiring or control cables etc.
2. Use the template to mark and cut a hole 65 mm (h) by 165 mm (w), allowing for clearance of the two mounting screws holding the radio to the surround.
3. Use a 10 mm drill bit to form the radius of the corners and an 8 mm drill bit for the clearance of the mounting screws.
4. Install the radio using the two machine screws (supplied) by engaging them in the threaded holes in each side of the radio housing.
5. Connect the antenna lead, DC power lead and extension speaker leads (if fitted) as per the radio’s instructions and check the radio is operational.
6. Insert combined radio and secure with four self tapping screws (supplied). If the radio is mounted in an exposed position it may be advisable to run a bead of suitable sealant behind the surround to prevent water seeping behind the dash board or bulkhead.
7. Install dress caps (supplied) over the self tapping screws to neaten the installation.
NOTE: If you are replacing your current installation and the existing hole is larger than the template, you will need to use the saw tooth clamps (supplied).
1. Loosely fit the clamps on to the flush mount bracket using the four machine screws provided in the clamp kit (pictured below).
2. Insert combined radio and secure with four self tapping screws (supplied). If the radio is mounted in an exposed position it may be advisable to run a bead of suitable sealant behind the surround to prevent water seeping behind the dash board or bulkhead.
3. Install dress caps (supplied) over the self tapping screws to neaten the installation.
165
mm
8 m
m
2.5
mm
10 m
m D
rill B
itM
ount
ing
Sc
rew
Cle
aran
ce
8 m
m D
rill B
it
MK0
08/M
K011
MO
UN
TIN
G T
EMPL
ATE
Head Office: PO Box 96, Winston Hills, NSW 2153, AustraliaA division of Standard Communications Pty Ltd.
Part Number: 310692 Drawing Number: 48333-1 65 mm