Guide 2018 -19 · (CSE), Mechanical Engineering (M.E.), Electrical Engineering (EE), Electronics & Communication Engineering (ECE)) were provisionally accredit-ed by the National

Recr

uitme

nt Gu

ide20

18 -1

9

GIRIJANANDA CHOWDHURY INSTITUTE OF MANAGEMENT & TECHNOLOGY (GIMT)

(AICTE approved and affiliated to Assam Science & Technology University)

2 RECRUITMENT GUIDE 2018-19

Girijananda chowdhury institute of management and technologyGIMT

CONTENTS MessagebyPrincipal

Vision&Mission

InstituteGenesis

AboutNationalBoardofAccreditation

Infrastructurefacilities

GIMTAdministration

DetailsofOutgoingStudents

AdmissionCriteria

AcademicAchievementofGIMTstudentsintheUniversityfinalexaminations

BachelorofTechnology(B.Tech)INMechanicalEngineering

BachelorofTechnology(B.Tech)inElectronics&CommunicationEngneering BachelorofTechnology(B.Tech)inElectricalEngineering BachelorofTechnology(B.Tech)inAppliedElectronicsandInstrumentationEngineering

BachelorofTechnology(B.Tech)inComputerScienceandEngineering

BachelorofTechnology(B.Tech)inCivilEngineering

MasterofBusinessAdministration(MBA)

MasterofComputerApplication(MCA)

MasterofTechnology(M.Tech)inComputerScienceandEngineering

MasterofTechnology(M.Tech)inElectronics&CommunicationEngineering

MasterofTechnology(M.Tech)inInstrumentationandControlEngineering

SupportingCells

CentreforCareerDevelopment

BeyondAcademics

3

4

5

6

7-13

14

15

16

17-20

22-25

26-29

30-33

34-37

38-40

41-43

45-47

48-50

50-51

52-53

54-55

56-58

59-64

66-67

3RECRUITMENT GUIDE 2018-19

GIMTGirijananda chowdhury institute of management and technology

MESSAGEFROM PRINCIPAL

Girijananda Chowdhury Institute of Management & Technology – an initiative of Shrimanta Shankar Academy – was established in September 2006 as a first Engineering and Management College in the non-governmental sector in Assam. The institute is approved by the AICTE as well as by the Govt. of Assam and is currently affiliated the Assam Science and Technology University. In its first academic session, the institute offered BE programmes in Applied Elec-

tronics & Instrumentation Engineering (AEI), Computer Science & Engineering (CSE), Infor-mation Technology (IT) and Electronics & Communication Engineering (ECE). Subsequently, over a span of a decade, the institute has introduced 2 (two) UG Programmes in Electrical Engineering (EE) and Mechanical Engineering (ME) and 5 (five) PG Programmes namely Mas-ter of Business Administration (MBA), Master of Computer Application (MCA) and MTech. in Instrumentation & Control Engineering (ICE), ECE and CSE.GIMT, Guwahati, since its inception, has been rendering a remarkable service in promoting and popu-larising engineering and management education in this region with a vision of transforming our youths into competent, disciplined and quality engineers and administrators, who would have the skills and competencies to become global pioneers of tomorrow. It is worth mentioning that the untiring efforts of our faculty members & staff as well as the trust vested on us by the guardians, students and re-cruiters are priceless in our endeavour towards occupying a prestigious place in the engineering and management educational sector of this part of the country. This is reflected from the fact that five of our UG programmes (AEI, CSE, ECE, EE and ME) were accredited for 2 years w.e.f from July 2016 by the National Board of Accreditation (NBA) – a feat too hard to achieve and has put us in prestigious position of becoming the first non-government college in the NE Region to obtain such recognition.Further, in an effort to continue with the legacy of Shrimanta Shankar Academy Society towards im-parting quality education, GIMT employs a perfect blend of academics and co-curricular activities in all its UG & PG programmes. The institute follows a modern and dynamic curriculum with faculty mem-bers using innovative teaching pedagogy. Our students are continuously encouraged to pursue various short-term courses related to their domain as well as are trained on soft skills. All these are offered under the aegis of its Finishing School, with an aim to hone the employability skills of our students further. Undoubtedly, our students are strong enough in terms of domain knowledge, attitude, skills and values. Perhaps this is why GIMT has become a choice of major recruiters. Needless to say, the performances of GIMT alumni are always appreciated and today, most of our alumni are well placed in Government as well as in corporate houses.Last but not the least, as a Principal of GIMT, it gives me immense pleasure to take this opportunity to invite you to the Institute’s Placement Program of 2018-2019. I hope our GIMTians would not only meet your requirements but even surpass your expectations.

GIMT Girijananda chowdhury institute of management and technology

VISION

MISSION

To produce competent, disciplined and quality engineers and administrators, having the drive, skill and confidence to be-come global pioneers of tomorrow.

To be a leader in providing quality education and training in en-gineering, technology and management by continuous devel-opment of infrastructure and enhance state-of-the-art equip-ment and facilities to satisfy its stakeholders - the students, parents, industry and the society. The institute is committed to enable meaningful learning by providing intellectually inspiring environment of learning, research, innovation and professional activity.



Institute Genesis

Girijananda Chowdhury In-stitute of Management and Technology, Guwahati cam-pus was founded on 7th September 2006 as the first non-governmental engineer-

ing institute in Assam under the patronage of the Shrimanta Shankar Academy Soci-ety. Ever since its inception, the institute’s aim has been to establish a morally sound educational system, which not only produc-es competent professionals but also excel-lent human beings contributing towards the welfare of the Society.The institute was established with approval from the All India Council for Technical Education (AICTE), New Delhi and permission from the State Government. Initially, GIMT was affiliated to the oldest and most reputed University in the State i.e., Gauhati Univer-sity. Under the policy to bring all the engineering colleges under the same umbrella, Assam Science and Technology University (ASTU) was established by Govt. of Assam and since August 2013, the institute has been affiliated to this University.The institute has a total campus area of 6.94 acre with total built up area of 23,423.9 sq. m., with strength of 130 numbers of full time faculty mem-bers comprising of Graduates, Post-graduates and Doctorates involved in mentoring of the students. The institute is located near the majestic Deepor Beel, permanent freshwater wetland, famous for migratory birds, five km to the east of L.G.B. Inter-national Airport, Guwahati and 16 km to the west of Guwahati Railway Station.The first session of the Institute commenced on 13th July 2006 with 240 students in four disciplines lead-ing to the Bachelor’s degree in Electronics & Tele-communication Engineering (ETE), Applied Electron-ics and Instrumentation (AEI), Computer Science and Engineering (CSE) and Information Technology (IT).Two more undergraduate courses in Mechanical and Electrical Engineering were added in the years 2007 and 2008 respectively. Civil Engineering was added in the year 2014.The first post-graduate course in Business Adminis-tration leading to award of M.B.A. degree was intro-duced in the year 2008. In 2009, the second post graduate course programme in Computer Application

leading to award of M.C.A. degree commenced at the institute.The Institute also has approval from AICTE for Master of Technology (M.Tech.) programme in Computer Science & Engineering (CSE), Elec-tronics & Communication Engineering (ECE), In-strumentation & Control Engineering (ICE) and Thermal and Fluid Engineering.Although only 11 years old, GIMT has already evolved as a pioneer in the field of higher tech-nical education. The quality is further amply recognized when five engineering programmes (B.Tech in Applied Electronics and Instrumenta-tion (AEI), Computer Science and Engineering (CSE), Mechanical Engineering (M.E.), Electrical Engineering (EE), Electronics & Communication Engineering (ECE)) were provisionally accredit-ed by the National Board of Accreditation (NBA), in 2016.




About National Board of Accreditation (NBA)

T he National Board of Accreditation (NBA), India was initially established by All India Council for Technical Education (AICTE) under section 10 (u)of AICTE act, in the year 1994, for periodic evaluations of technical insti-tutions & programs. India is officially a member of the Washington accord

from 13th June, 2014 with the permanent signatory status of the National Board of Accreditation (NBA). This is considered as a significant step of progress for the high-

Some of the salient points of National Board of Accreditation (NBA) are as follows:

NBA Accreditation in Girijananda Chowdhury Institute of Management and Technology, Guwahati :

• It is a kind of recognition which indicates that a programme or degree have interna-tional standards.

• The Washington Accord encourages and facilitates the mobility of engineering and pharmacy graduates and professionals at international level.

• A student in India graduating from an institute accredited by NBA is eligible to prac-tice as a pharmacy professional / engineer in his/her relevant domain in any of the countries that have signed the Washington Accord.

• The only body eligible for accreditation of the Pharmacy / Engineering courses which can enjoy the privileges of the Washington Accord is “National Board of Accredita-tion” (NBA) in India.

• The Washington Accord is a step forward to better higher-education system in India and allow Indian graduates to compete at a global stage.

B.Tech Programme in Computer Science and Engineering, Electrical Engineering and Mechanical Engineering are provisionally accredited by National of Accreditation (NBA) for the period 2016-2019. B.Tech Programme in Applied Electronics and Instrumenta-tion Engineering, Electronics and Communication Engineering are provisionally accred-ited by National of Accreditation (NBA) for the period 2016-2018.


INFRASTRUCTURE FACILITIES

Classroom

There are 54 well equipped classrooms and tutorial rooms in the institute for conducting classes, tutorials for the courses conducted by various departments. The class rooms are sized as per AICTE norms and requirements. Most of the classroom area is more than 66 square metres with sufficient numbers of fur-niture and fixtures. The classrooms are equipped either with green boards, black boards or white boards with a platform for conducting lectures by faculty members and instructors. There are also Model class-rooms (smart classrooms) equipped with LCD projectors, smart board and audio facilities.

Laboratories and Workshop

Laboratories

The institute has 62 laboratories to cater for all the departments running various engineering courses. All these laboratories are well equipped with latest equipment to expose students to the changing technolog-ical advancements. The institute continues to upgrade and improvise these laboratories to keep pace with the latest developments in the field of engineering.

Central Workshop

The Central workshop measuring 450 sq. m. has been equipped to provide all the facilities for the basic training of the engineering students in turning, machining & amp; welding, fitting, carpentry and black-smith trades. The facilities of the workshop is also utilized for making models etc. for students’ project works and minor repair works of institute’s fleet of transports, constructional work requirements and meeting the need of other departments/laboratories of the institute.

Girijananda chowdhury institute of management and technology GIMT


INFRASTRUCTURE FACILITIESCentral Library

The Central Library occupies total floor area of more than 600 sq. m., including a spacious reading room to accommodate at least 100 students for self-study. The functioning of the library is computerized with integrated library management software. The library is equipped with national and international journals (IEEE, ASPP) of both printed and online forms for the benefit of the students and the faculty members. Ten computers with broadband connection and LAN have been provided to browse variousE-journals available in the library. The library is stocked with an adequate number of latest edition text books. At present it has about 30,000 volumes of books with 6112 titles.

Computing facilities

The computing facility of the institute occupies a floor space of more than 300 sq. m. and houses around 200 computers loaded with Windows XP/ Vista & amp; Linux operating systems. All the computers are based on Pentium – IV and Dual Core Technology with some connected to wireless LAN through a central server with an ability to work on different platforms. Internet facility with totaling more than 100-MBPS Broad Band is available to 100% of the computers. Students at GIMT are encouraged, from the very begin-ning, to use the computer independently in order to gain sufficient hands on practice. In addition to this, several laboratories have large numbers of computers dedicated to perform specified tasks in laboratory experiments.The Departments of Business Administration also houses a modern computer centre equipped with suffi-cient number of computers with internet facility as per AICTE requirement. This centre is meant for use of MBA students exclusively. Similarly, another computer centre, having around 90 computers, is in place for MCA students. The students enjoy access to different international and national journals and eBooks from these centres.



Canteen facilities

The canteen is housed in a spacious building providing hygienic breakfast, lunch, tea and snacks to stu-dents, faculty and staff members at moderate rates. The area of the canteen is more than 400 square meter to cater the need of more than 2000 students of the institute. The canteen facility also caters for special function arranged at different times with specialized food items as and when required. There are more than 10 employees in the canteen with hands on experience.

Language Laboratory

The institute established Language Laboratory to train the students in improving their mastery over the English language and communication. It is equipped with 31 computers (one faculty and 30 students’ computers). Orell Digital Language lab software has been installed in all the computers. Humanities De-partment is responsible to run this facility.

Seminar Hall

There are six well equipped Seminar Halls. Audio Visual facilities are in placed to fulfill the need of the academic departments of the institute. The seminar hall allows the institute to conduct national level con-ferences, workshops and seminars within its own premises. With seating capacity of 200 persons, GIMT is conducting national level conference on various disciplines.



RECRUITMENT GUIDE 2018-19

INFRASTRUCTURE FACILITIESCollaborationsGIMT-BOSCH Collaboration

The institute has taken various initiatives to collaborate with industries and institutes. An initiative which will be of immense help to our students, a GIMT-Bosch Joint Certification Training Centre has been opened at our premises in February 2014. BOSCH is a renowned German Company dealing in development and maintenance of petrol and diesel engines. In a joint collaboration, GIMT is providing the infrastructure and the machines while Bosch is providing the expertise. The first batch of students from GIMT has already un-dergone the training and more such courses will follow. The cost of the training is being heavily subsidized by us so maximum students can benefit from the training.

GIMT-IIT, Mumbai Collaboration

The Finishing School conducts an array of technical training certificate courses offered by IIT Bombay Spo-ken Tutorial in association with Ministry of Human Resource Development (MHRD), a part of its Mission for Education – Information and Communication Technology (ICT). These courses are selected to cater to specific and latest industry needs. Regular classes in communication skills and soft skills are conducted. Sessions on CV and resume writing, group discussion sessions, interview performance and behavior, com-munication and presentation skills, personality development, time management skills, negotiation skills, interpersonal and team management etc.

Transport Facilities

The institute has more than 15 vehicles to cater for the needs of the students as well as faculty members and staff. GIMT runs college bus service along specifies routes from the city to the college and back.


10

RECRUITMENT GUIDE 2018-19 11



Hostel FacilitiesGirls’ Hostel:

The institute owns a girls hostel having 116 double-bedded rooms inside the college campus. The Girls Hostel is being looked after by two hostel wardens. Girls Hostel of the institute has been administered with some rules and regulations and borders are to follow such rules for smooth running of the day to day activities.

Boys’ Hostel:

The institute is building a six storied boys’ hostel within the campus. Ground floor to 3rd floor will be com-missioned from session starting from July 2018.

Medical Facilities

The emergency medical care facilities are available with the institution in different ways: (a) A registered Medical Practitioner is available for medical needs. (b) A nurse is appointed for emergency medical care. (c) The Government Medical Hospital, Azara, Guwahati – 17 is only within 500m distance with the institute and in case of any emergency; patients are brought to the hospital by the van used for medical emergency. (d) The institute has opened a medishop under Pradhan Mantri Jana Aushadhi Scheme.


INFRASTRUCTURE FACILITIESBoys & Girls Common Rooms

There are separate Boys and Girls Common Rooms to fulfill the basic amenities of the girls and boys stu-dents. The Common Rooms are equipped with the various sports and musical instruments. Students can avail the facilities to develop their co-curricular and extra-curricular activities.

Playground

The institute has a playground with a total area of 4050 sq.m. Facilities are available for various outdoor games such as – cricket, football, volleyball, etc. A mini sports complex was recently inaugurated by Shri Jaswantsinh Sumanbhai Bhabhor, Honorable Minister of State for Tribal Affairs, Govt. of India.

ATM Facility

The institute has recently introduced the facility of ATM in collaboration with State Bank of India to cater the financial needs of students, faculty members and staffs.

Security and safety arrangements

Round the clock security is provided with eleven security personnel ( in three shifts) duty. Two securi-ty personnel are employed separately for girls’ hostel at night. Different measures have been taken for checking the safety and security norms. Weekly checks are carried out on all electrical installations and panel boards in the institute by the resident electrician. In addition, all complaints received are properly addressed. CCTV cameras are fitted at various locations in each floor of the academic building, hostel, administration block and in canteen.


12



Disaster Management Options

The building has been constructed with adequate passage facility for immediate evacuation in case of emergency. Sufficient water storage facilities have been created to cope up with fire hazards and each and every floor is facilitated with such water pumping facilities. Classrooms, laboratories, seminar halls and workshop are well ventilated and are provided with multiple exits. The main institute building has three sets of wide stairs cases to meet any emergency. At the ground floor five exits are available for emergency evacuation. Fire and earthquake evacuation plans have been put in place and personnel (faculty and stu-dents) adequately trained to handle the situation till arrival of assistance. Personnel of the institute also attended various training programmes conducted by the Assam Disaster Management Authority. 154 fire extinguishers have been deployed in various locations and laboratories in the institute for immediate fire prevention. In addition, fire-fighting equipments have been deployed with over 1 lakh litres of water-short-age capacity in the institute campus. Large pathway from the approach road allows easy entry of fire-fight-ing vehicles and equipment.



GIMT ADMINISTRATION

Sl No

Name Designation Past Experiences

1. Prof. Sushanta Kumar Dutta, B.E, M.E., Ph.D. (NIT Allahabad)

Principal Former Principal, Jorhat Institute of Science and Technology, Jorhat; Professor & HOD, Mechanical Engineering Department, Jorhat Engineering College, Jorhat.

2. Dr. Mukti Ranjan Singha, B.Sc. (Hons), M.C.A., Ph.D. (Gauhati Uni-versity)

Dean (Academic), & HOD, Department of Computer Application

Reader & HOD, Computer Application Department, NERIM

3. Capt (Retd.) Iswar Prasad Sharma, MAeSI, Naval Aeronautical Engineer, MIE, Naval Marine Engineer.

Dean (Administration) Dy. Director, Naval Institute of Aeronautical Technol-ogy, Kochi. Dy. Director, Naval Projects, Naval Head Quarter, New Delhi.

4. Dr. Th. Shanta Kumar M.C.A., Ph.D.(Himachal Pradesh University)

Dean (Research & Consultancy) and HOD, Computer Science & Engineering

Former Principal, Scholar’s Institute of Technology and Management, Guwahati.



The students of following U.G. and P.G. courses are ready for placements in various organizations.

Under-graduate Courses

Post-graduate Courses

Sl No. Programmes 1 B.Tech. in Mechanical Engineering2 B.Tech. in Electronics & Communication Engineering3 B.Tech. in Electrical Engineering4 B.Tech. in Applied Electronics & Instrumentation5 B.Tech. in Computer Science & Engineering6 B.Tech. in Civil Engineering

Sl No. Programmes 1 Master of Business Administration2 Master of Computer Application3 M.Tech. in Computer Science & Engineering4 M.Tech. in Electronics & Communication Engineering5 M.Tech. in Instrumentation & Control Engineering

DETAILS OF OUTGOING STUDENTS



ADMISSION CRITERIA

SL No

Course Entrance Test Eligibility Criteria Remarks

1 B.Tech. (All Programmes) CEE – 65 %JEE – 35 %

As per AICTE norms As per norms given by DTE Assam

2 MBA University Test / MAT

As per AICTE norms As per University norms

3 MCA University Test / Institute Test


4 M.Tech. (All Programmes) GATE/ University Test / Institute Test


**ADMISSIONS ARE ONLY THROUGH MERIT.



Academic Achievementof GIMT students

Academic Achievement in 2010

The first batches of B.E. and MBA students have passed out in the year 2010 with brilliant performance. They have topped the Gauhati University Examinations with respect to all the courses offered by GIMT.

Sl. No Name of the student Position Branch1 Bishwadeep Poddar 1st Class 1st position(Honours) Electronics & Telecommunication Engi-

neering2 Arnab Kundu 1st Class 1st position(Honours) Computer Science & Engineering3 Priyom Dutta 1st Class 1st position Applied Electronics & Instrumentation

4 Swati Agarwal 1st Class 1st position Information Technology

5 Debolina Bhuyan 1st Class 1st position Business Administration

Sl. No

Name of the student

Position Branch

1 Jagrity Phukan 1st Class 1st position (Honours) Information Technology

2 Pratiksha Sarma 1st Class 1st position (Honours) Applied Electronics & Instrumentation3 Gitimoni Talukdar 1st Class 2nd position (Honours) Computer Science & Engineering

4 Amita Sengupta 1st Class 2nd position (Honours) Electronics & Telecommunication Engi-neering


The 2nd batch Engineering (B.E.) students’ graduates with flying colours- 1st class 1st& 2nd positions achieved in the Gauhati University B.E. final Examination.




The 3rd batches of B.E. and 1st batch students of MCA have passed out in the year 2012 with brilliant performance in the Gauhati University B.E. and MCA final Examinations.


The 4th batches of B.E. and 2nd batch students of MCA have passed out in the year 2013 with excellent performance in the Gauhati University B.E. and MCA final Examinations.

Sl. No

Name of the student Position Branch

1 Bidisha Sarma 1st Class 1st position(Hon-ours)

Electronics & Telecommunication Engi-neering

2 Anirban Lekharu 1st Class 1st position(Hon-ours)

Computer Science & Engineering

3 Jugal Kishor Bhardwaz 1st Class 1st position Applied Electronics & Instrumentation

4 Bharat Jyoti Hazarika 1st Class 1st position Information Technology

5 Shuvayan Brahmach-ary

1st Class 2nd position(Hon-ours)

Mechanical Engineering

6 Anupam Saikia 1st Class 3rd position (Hon-ours)

Electrical Engineering

7 Sunilam Chakraborty 1st class 1stposition (Hon-ours)

MCA

8 Himangshu Borah 1st class 3rd position(Hon-ours)

MCA

Sl. No


1 Panchali Das 1st Class 1st Position (Hon-ours)

MCA

2 Abu Raihan 1st Class 2nd Position (Hon-ours)

MCA

3 Prarthana Sarma 1st Class 1st Position (Hon-ours)

Applied Electronics & Instrumentation

4 Salma Sultana Khatun 1st Class 2nd Position Applied Electronics & Instrumentation

5 Neelam Agarwalla 1st Class 1st Position (Hon-ours)

Information Technology

6 Bidisha Dutta 1st Class 2nd Position (Hon-ours)

Information Technology




The 5th batches of B.E. and 3rd batch students of MCA have passed out in the year 2014 with excellent performance in the Gauhati University B.E. and MCA final Examinations.


The 6th batches of B.E. and 4th batch students of MCA have passed out in the year 2015 with excellent performance in the Gauhati University B.E. and MCA final Examinations.

Sl. No


1 Rajat Kamal Kakati 1st Class 1st Position (Honours) Mechanical Engineering

2 Kashmiri Deka All branch topper under Gauhati University. (Gold Medalist)

Mechanical Engineering

3 Daisy Gogoi 1st Class 2nd Position (Honours) Applied Electronics & Instrumenta-tion

4 Kalyan Bhattacharjee 1st Class 1st Position (Honours) Applied Electronics & Instrumenta-tion

5 Jesmine Ahmed 1st Class 2nd Position (Honours) MCA 6 Shrabani Medhi 1st Class 2nd Position (Honours) ME (Computer Science) 7 Geetashri Lachit 1st Class 1st Position (Honours) ME (Computer Science)

Sl. No


1 Parijat Bharali 1st Class 3rd Position (Honours) Mechanical Engineering

2 Priti Mazumder 1st Class 1st Position (Honours) Information Technology 3 Jayshree Talukdar 1st Class 2nd Position Information Technology

4 Gaurav Mittal 1st Class 1st Position Applied Electronics & Instrumenta-tion

5 Abhishek Borah 1st Class 2nd Position Applied Electronics & Instrumenta-tion

6 G. Priya 1st Class 1st Position (Honours) ME (Computer Science)7 Neelam Agarwalla 1st class 2nd Position (Honours) ME (Computer Science)




The 7th batches of B.E. and MBA and 5th batch students of MCA have passed out in the year 2016 with excellent performance in the Gauhati University & Assam Science & Technology University final Examina-tions.

Sl. No


1 Pompi Kalita 1st Class 1st Position Applied Electronics & Instru-mentation

2 Anupam Nath 1st Class 2nd Position (Honours) Computer Science & Engineer-ing

3 Nishigandha Dutta 1st Class 1st Position Information Technology

4 Bhaswati Kumar 1st Class 2nd Position Master of Business Administra-tion

5 Shatabdi Chetia 1st Class 1st Position Master of Computer Applica-tion

6 Jayashree Das 1st Class 1st Position M.Tech. (Computer Science & Engineering)

7 Bipasa Mahanta 1st Class 1st Position M.Tech. (Electronic & Commu-nication & Engineering)

8 Sarmistha Das 1st Class 1st Position M.Tech. (Instrumentation & Control Engineering)


The 7th batches of B.E. and MBA and 5th batch students of MCA have passed out in the year 2016 with excellent performance in the Gauhati University & Assam Science & Technology University final Examina-tions.

Sl. No


1 Dubari Sutradhar 1st Class 1st Position Applied Electronics & Instrumenta-tion

2 Ajay Choudhury 1st Class 1st Position (Honours) Electronic & Communication & Engi-neering

3 Amit Mundra 1st Class 1st Position (Honours) Computer Science & Engineering

4 Madhuryya Sarmah 1st Class 2nd Position (Honours) Electrical Engineering

5 Chayya Kumari 1st Class 2nd Position Master of Business Administration6 Monika Barman 1st Class 1st Position Master of Computer Application7 Bhaswati Kalita 1st Class 1st Position M.Tech. (Electronic & Communication

& Engineering)8 Mayuri Sarmah Mazinder 1st Class 1st Position M.Tech. (Instrumentation & Control

Engineering)9 Mala Ahmed 1st Class 1st Position M.Tech. (Computer Science & Engi-

neering)



Under-graduate Courses


The Bachelor of Engineering programme in Mechanical Engineering was started in July 2007 under the af-filiation of Gauhati University. In 2013 the department started Bachelor of Technology programme (B.Tech) under Assam Science and Technology University (ASTU.The programme has been provisionally accredited by National Board of Accreditation (NBA) for the academic years 2016 – 17 to 2018 – 19.The curriculum carrying 200 credits covers course subjects of physics, chemistry, humanities, economics & accountancy, mathematics including numerical analysis and engineering based subjects – basic mechan-ical engineering, thermodynamics (basic and applied), design fluid mechanics, heat transfer, IC engines, mechanisms and machines, workshop technology & advanced manufacturing, refrigeration and air-condi-tioning, production management, optimization technique, power plant engineering, turbo machinery, gas turbines & jet propulsion, machine tools and industrial engineering and management. The students enrich their learning experience through practical/seminars/industrial training/projects.

Programme DetailsDegree offered : Bachelor of Technology in Mechanical Engineering (Affiliated to Assam Science and Technology University)Duration : 4 years (8 semester)Intake : 90 (1st semester level) – two sections 18 (3rd semester level) – lateral entry

B. TECH. IN MECHANICAL ENGINEERING



Mechanics of Materials Fluid Mechanics Material Science Mechanism & Machines Heat Transfer Metrology & Instrumentation Machine Design including CAD Operation Research Numerical Methods and Computation Hydraulic Machines Integrated Design & Manufacturing Industrial Engineering & Management Internal Combustion Engine Machine Tools & Machining Gas Turbine & Jet Propulsion Computer Aided Design Refrigeration & Air Conditioning Turbo Machinery Power Plant Engineering Optimisation Technique Project & Production Management Project work with adequate institute/industrial exposure


Laboratories: Basic Mechanical Engineering Lab: Several innovative experiments have been designed enabling students to acquire basic knowledge on working of IC engines, boilers including mountings & accessories, brakes 7 clutches, governors, gear trains etc., as well as conducting experiments to establish different laws of forces.

Mechanism & Machines Lab: Models of mechanisms and their inversions & working models of universal governors, balancing apparatus, belt drives, apparatus for Corioli’s component of acceleration, Universal vibration set up, gyroscope etc., are available in this lab where students perform a number of hands on experiments.

Fluid Mechanics Lab: In this lab, students are to perform a number of experiments concerning Vortex flow, Reynolds number, pipe friction, metacentric height, Bernoulli’s Theorem etc., in the existing laboratory setups.

Core subjects offered: Basic Mechanical Engineering Basic & Applied Thermodynamics Machine Drawing Primary Manufacturing



Heat Transfer Lab: Several experiments on heat transfer through solids, liquids, powder and com-posite walls and other experiments using Stefan Boltzmann Apparatus, heat pipe, emissive apparatus etc., are being performed by students in this lab.

Metrology & Instrumentation Lab: Several experiments based on measurement of pressure, tem-perature, speed, torque, displacement, force, strain, load etc., are being performed in this lab.

Material Testing Lab: Several material testing machines like Brinell cum Rockwell Hardness tes-ter, impact testing machine, fatigue testing machine, torsion testing machine including a 100 ton UTM machine (funded by AICTE, under MODROB) are installed to conduct a large number of experiments and project related activities.

CAD Lab: This facility is created for designed related project work and research based activities of students of the department.

CNC Lab: A CNC machine has been installed in the department under MODROB project, funded by AICTE, as a part of Advanced Manufacturing Lab. Final year students’ project can be executed in this state of art machine.

Refrigeration & Air-conditioning Lab: This lab houses equipment like Refrigeration and Air-con-ditioning test rig, Ice plant trainer, Electrolux Refrigerator etc., to carry out a number of experiments on Refrigeration and Air-conditioning.

IC Engine Lab: 4-stroke 4-cylinder Petrol and Diesel Engines Test Rigs are installed to conduct a variety of experiments pertaining to IC Engines as well as for students’ project related work.

Fuel Injection Centre: A state of art “Fuel Injection Lab” was established with the help of Bosch Limited and a training centre of Bosch has been functioning under this department.

Other Activities: The department with collaboration with students chapter of the Institution of Engineers (India), Assam State Centre conducts seminar, workshop on regular basis. Interactive programmes are also held regular-ly.“Yantrik Cult” is an initiative by the Mechanical Engineering students which organizes technical talks, sem-inars, workshops etc., on regular basis along with several steps towards social development.Successfully completed a research project on “Modification of Existing Handloom by Incorporation of Semi – Automatic Features with Power Feed” funded by Assam Science, Technology and Environment Council, DST, Govt. of Assam.The Department of Mechanical Engineering has organized a 5 day winter school on “Engineering Mechan-ics” during 27th February to 3rd March 2017 for the students of GIMT, Guwahati.The Department of Mechanical Engineering has organized a 5 day Faculty Development Programme on “ANSYS and its Application in Engineering” from 5th June to 9th June 2017.




B. TECH. IN ELECTRONICS & COMMUNICATIONS ENGINEERING

The Department of Electronics & Communication Engineering was started in September 2006 under the the affiliation of Gauhati University. Since 2013, B.Tech. programme has commenced and is affiliated to Assam Science & Technology University (ASTU).The curriculum with 48 courses/ 37 practicals/ 239 credits cover core subjects of Basic Science, Mathe-matics, Humanities and Technology, besides vital aspects of Electrical Engineering, Electronics Engineer-ing and Computer Science and Engineering with particular emphasis on various fields of Communication Engineering.

Programme DetailsDegree offered : Bachelor of Technology in Electronics and Communication Engineering (Affiliated to Assam Science and Technology University)Duration : 4 years (8 semester)Intake : 90 (1st semester level) – two sections 18 (3rd semester level) – lateral entry



Environmental Science Network Analysis Semiconductor & Electronic Devices Analog Electronic Circuits Digital Electronics Signals & Systems Random Variables & Stochastic Processes Microprocessor & Applications Electromagnetic Field Theory Analog Communication Power Electronics Control System Digital Signal Processing Microcontroller & Applications Digital Communication Data Structure VHDL & Digital System Design Computer Communication Networks Linear Integrated Circuits Antenna & Wave Propagation Wireless Communication Telecommunication Switching & Transmission Systems VLSI Design Embedded System Information Theory & Coding Satellite Communication & Remote Sensing Optical Communication

Computer Architecture & Organization Digital Image Processing Fuzzy Logic and Neutral Networks Radar Engineering CAD for VLSI Biomedical Engineering

Core subjects offered: Basic Electrical & Electronics Engineering - I Basic Electrical & Electronics Engineering - II Basic Mechanical Engineering Basic Civil Engineering Engineering Graphics




Laboratories:• Electronic Devices• Linear Integrated Circuit• Digital Electronics• Network Analysis• Signal and System• Analog and Digital Communication• Microprocessor and Microcontroller• Microwave Engineering• Digital Signal Processing• Xilinx• Optical Communication

The Department also has procured some of the valuable software packages for the students so that they can acquaint themselves with latest technologies. Some of them are :

• Cadence• Xilinx• MATLAB• MultiSim & VisSim• Communication System Simulation• Labview etc.

Specialized Laboratories:

These specialized laboratories are set-up for highly motivated students and faculties towards pioneering applied research, using their creative talents to pioneer new technology.

1. CADENCE VIRTUOSO: This tool introduces various stages of IC designing, complex and high level SOC’s. The future and scope of VLSI is immense in NANO – electronics and Microelectronics.

2.OPTICAL COMMUNICATION: A research oriented laboratory on Optical Fiber Communication has been set-up in the department in view of the growing use of optical fiber in the field of communication and its research.

Other Activities:The department has organized a workshop in collaboration with Entuple Technologies, Bengaluru on “Cus-tom -IC and ASIC Design Flow using Cadence EDA Tools”.

The department has organized a seminar on “Tunnel Field Effect Transistors: Overview, Theory and Chal-lenges” to give exposure with new trends of technology.

A one day symposium “Ideas & Innovation: Meeting Global Challenges” was organized on 21st Dec, 2016. The symposium was organized with the objective of giving an idea about the recent advances in the field of Electronics & Communication Engineering.


The 3-day workshop on “Emerging Trends & Scope of Electronics & Communication En-gineering” organized by the Department of ECE, GIMT-Guwahati was intended with the objective to provide organized know-how to the participants on a diverse range of topics focussing on the recent advances and scope of electronics & communication engineering. Starting with the basic concepts and rudimentary familiarization, the workshop provided in-depth know-how on some of the applications in few selected areas of electronics & communication engineering.



B. TECH. IN ELECTRICAL ENGINEERING

The 4 year degree course of Electrical Engineering (B.E.) was started in the institute in July 2008 under the affiliation of Gauhati University. Since August 2013, the department has been offering B.Tech degree programme under Assam Science and Technology University.The programme has been provisionally accredited by National Board of Accreditation (NBA) for the aca-demic years 2016 – 17 to 2018 –19.It has a curriculum with 84 courses/200 credits that include practicals, seminars, training, projects etc., and cover subjects on basic sciences, humanities and technology. The course structure and syllabi for the branch is basically electrical power system oriented and encompasses theory courses like power systems, control system, power electronics, electrical machines, computer oriented analysis, industrial drives and control, high voltage engineering and other electives.

Programme DetailsDegree offered : Bachelor of Technology in Electrical Engineering (Affiliated to Assam Science and Technology University)Duration : 4 years (8 semester)Intake : 60 (1st semester level) 12 (3rd semester level) – lateral entry



Core subjects offered: Basic Electrical & Electronics Engineering – I & II Circuits Analysis Material Sciences Electrical Machines – I & II Analog Electronics Measurements & Instruments Electromagnetic Fields Digital Electronics Control System I & II Power Electronics Power System I & II Microprocessor and Microcontroller Signals and Systems Non-Conventional Energy Sources Communication Engineering Electrical Drives and Control Instrumentation Engineering Power System Operation and Control Operations Research Power Plant Engineering Computer Aided Design

Elective Courses offered: Reliability Engineering Illumination Engineering Digital Image Processing High Voltage Engineering Utilization and Conservation of Electrical Energy FACTS HVDC Transmission Expert System Digital System Design Engineering System Analysis & Design Engineering System Modeling & Simulation.

Laboratories: The Department of Electrical Engineering has the following laboratories fully equipped for respective theo-ry courses:

Basic Electrical and Electronics Engineering I & II Laboratory Electrical Machines I & II Laboratory Measurements and Instrumentation Laboratory




Analog Electronics Laboratory Power Electronics Laboratory Numerical Methods and Computation Laboratory Circuit Analysis Laboratory Control Systems I & II Laboratory Power System Laboratory Digital Electronics Laboratory Project Laboratory with PLC & SCADA and Process Automation Virtual Control System Laboratory (under MODROBs scheme)

Specialized Laboratories:AICTE funded lab set up under MODROBs named VIRTUAL CONTROL SYSTEM LAB to carry out different projects on Electrical as well as Electronics Engineering. This project is implemented using software named “LABVIEW” which also incorporates real time applications.

A Project laboratory on PLC & SCADA and Process Automation is setup under RPS (Research Promotion Schemes).

A 2.0 Kw off grid solar power plant has been established in GIMT Campus under Suryamitra which is a skill development programme for diploma level students. Main objective of this programme is to create skill manpower in the solar energy sector. The syllabus and guidelines of this programme is developed by National Institute of Solar Energy (NISE) and coordinated by Sate Nodal agencies, eg. AEDA.

Other Activities: The department of Electrical Engineering publishes a technical magazine “POWER – Path of Wisdom in Electrical Region” in every academic year. The purpose of it is to provide a platform to students and faculties to address global issues, career development topics, innovative ideas, research and important technical developments in electrical region and also to showcase the various achievements, activities and events of the department.

Besides this, the department has been annually publishing a wall-magazine SRIJON to showcase the cre-ativity in literature field of students as well as faculties.

Short term course on “Advanced Learning of MATLAB & SIMULINK and their Application in Electrical Engi-neering”, jointly organized by Assam Science and Technology University (ASTU) in association with Depart-ment of Electrical Engineering, GIMT-Guwahati under TEQIP-III, MHRD, New Delhi from 19th March to 23rd March, 2018.





B. TECH. IN APPLIED ELECTRONICS AND INSTRUMENTATION ENGINEERING

The Department of Applied Electronics and Instrumentation Engineering has initially started the Bachelor of Engineering (B.E.) progamme on Applied Electronics & Instrumentation Engineering (AEI) in September 2006 under Gauhati University. Subsequently, in the year 2013, the institute was affiliated to Assam Sci-ence and Technology University (ASTU) and B.Tech. programme has been started from the academic year 2013.The B.Tech. programme has 92 courses / 200 credits and covers core subjects of basic science, human-ities and technology besides vital aspects of Electrical, Electronics engineering and Computer Science with particular emphasis on Applied Electronics and Instrumentation Engineering.

Programme DetailsDegree offered : Bachelor of Technology in Applied Electronics and Instrumentation (Affiliated to Assam Science and Technology University)Duration : 4 years (8 semester)Intake : 30 (1st semester level) 06 (3rd semester level) – lateral entry


Core subjects offered: Fundamentals of Instrumentation Electrical and Electronic Measurements Introduction to signals and systems Digital Signal Processing Power Electronics Digital Electronic and Logic Design Control System Microprocessor and Embedded systems Object Oriented Programming and Data Structure Digital System Design Smart sensors and networks VLSI Design Electronic devices and circuits Optimization techniques Fiber Optic Instrumentation Microprocessor and Microcontroller Communication Theory Industrial Instrumentation Optical Instrumentation Process Control and Modeling Operations Research Analytical Instrumentation Transducer and Sensor Numerical Method and Computation Bio-Medical Instrumentation Fuzzy mathematics

Laboratories: The Department of Applied Electronics and Instrumentation Engineering has the following fully equipped laboratories:

Transducer Laboratory Power Electronics Laboratory Network Theory Laboratory Digital Electronics and Logic Design Laboratory Electronic Devices and Circuits Laboratory NUMAC (Numerical Methods and Computing) Laboratory Control System Laboratory Electrical and Electronic Measurement Laboratory Optical Fiber Instrumentation Laboratory Industrial Instrumentation Laboratory Process Control Laboratory Microprocessor Laboratory Project Laboratory – Hardware and Software



Other Activities: The department of Applied Electronics & Instrumentation Engineering organized a symposium on “Career Avenues for Engineering Graduates in India and Abroad”, February 27, 2016.

Extra-mural lecture by Ms. Richa Sarma, Assistant Manager, Customer Experience & Transformation, Wipro Technologies, Bangalore, August 16, 2016.

Staff Development Programme on “MATLAB and its application in Engineering”, 15-16 November, 2016.The department of Applied Electronics & Instrumentation Engineering also published its first annual tech-nical magazine “Journal of Applied Electronics & Instrumentation Engineering”.





The Department of Computer Science and Engineering was started in September, 2006 with an affiliation from Gauhati University and offered the Bachelor of Engineering (B.E.) degree progamme. The department started offering B.Tech. programme in 2013 under Assam Science and Technology University (ASTU) after the institute was affiliated to the newly established university.The programme has been provisionally accredited by National Board of Accreditation (NBA) for the aca-demic years 2016 – 17 to 2018 –19.

Programme DetailsDegree offered : Bachelor of Technology in Computer Science and Engineering (Affiliated to Assam Science and Technology University)Duration : 4 years (8 semester)Intake : 90 (1st semester level) 18 (3rd semester level) – lateral entry

Core subjects offered: Object Oriented Programming in C + + Basic Graph Theory Computer Architecture & Organization Data Structure & Algorithm Digital Systems Formal Language and Automata Theory Optimization Techniques Software Engineering

B. TECH. IN Computer Science and Engineering



B. TECH. IN Computer Science and Engineering

Principles of Programming Languages Computer Networks Data Base Management System Microprocessor and Microcontroller Operating System Principles of Communications Principles of Management Design & Analysis of Algorithms Cryptology & Network Security Network Programming Web Technology Data Mining Modeling & Simulation Compiler Design Computer Graphics & Visualization

Laboratories: The Department of Computer Science and Engineering has the following fully well-equipped laboratories with about 200 computers running on Linux and Windows with adequate software support. Most ma-chines are wireless networked and are connected to leased internet facility.

• Operating Systems Laboratory• Programming Laboratory I & II• Information Management Laboratory• Network Programming Laboratory• Project Laboratory• Research Laboratory (MODROB)• Data Analysis Laboratory

Other Activities: The department has organized a National Workshop on Big Data Analytics.The department has also organized a National level Seminar on “Indian (IEPS) Capacity Building Camp & Conference”.




B. TECH. IN CIVIL ENGINEERING

The Department of Civil Engineering was established in 2014 and offers Bachelor of Technology (B.Tech) programme under Assam Science and Technology University (ASTU).The programme had a curriculum that includes classroom teaching /practical /seminar /industrial training /site visits/ projects etc. The course structure and syllabi for the branch are basically imparting knowledge in the field of Civil Engineering and include theory papers like Design of structures, Surveying, Transporta-tion, Environmental engineering, Foundation engineering, Hydraulics, Irrigation, Hydrology and flood man-agement, Geo-technical engineering, Construction practice, Engineering geology and Rock mechanics and a number of electives.

Programme DetailsDegree offered : Bachelor of Technology in Civil Engineering (Affiliated to Assam Science and Technology University)Duration : 4 years (8 semester)Intake : 60 (1st semester level) 12 (3rd semester level) – lateral entry

Core subjects offered: Engineering Survey Fluid Mechanics Solid Mechanics Building Construction Structural Analysis Hydraulics & Hydraulics Machines Engineering Geology and Rock Mechanics Design of Structures Transportation Engineering Geo-technical Engineering Environmental Engineering




Quantity Survey and Estimation Advanced Engineering Geo Science Open Channel Flow Concrete Technology Pre-stressed Concrete Construction Project Management Design of Substructure Water Resources Engineering Earthquake Engineering Disaster Management Flood Management

Laboratories: The Department of Civil Engineering has the following fully equipped laboratories:

Solid Mechanics / Strength of materials Engineering Survey Fluid Mechanics Engineering Geology and Rock Mechanics Transportation Engineering Solid Mechanics Concrete Technology Environmental Engineering Computer Aided Design and Drawing

Other Activities: The department organized a seminar on “Green Technology”. The department also conducted Faculty Development Program.

The Department of Civil Engineering has a consultancy cell which offers consultancy services, laboratory testing of materials and various solutions to Civil Engineering related problems.






Post-graduate Courses

MASTER OF BUSINESS ADMINISTRATION

The Department of Business Administration started functioning from July, 2008 with a mission to impart quality education in a stimulating and innovative environment where students can be empowered with and professional skills, required to be an able manager and administrator. Initially, the department offered a full-time MBA programme under Gauhati University. However, from 2013, the department has been offer-ing a full-time two-year Master in Business Administration (MBA) under Assam Science and Technology University (ASTU).The MBA progamme offers a total of 37 papers spread over 4 semesters. The course offers dual special-ization in the areas of Financial Management, Human Resource Management, Marketing Management and Production Management. Moreover, apart from core specialization paper, the students need to select an elective paper also. Apart from the course work, the students are required to undergo 2-month Industry Internship Program in reputed organizations and prepare a Project Report.

Programme DetailsDegree offered : Master of Business Administration (MBA) (Affiliated to Assam Science and Technology University)Duration : 2 years (4 semester)Intake : 60 Nos





Core subjects offered:FIRST SEMESTER SECOND SEMESTERPrinciples of Management Research Tools & TechniquesOrganizational Behaviour Financial ManagementManagerial Economics Marketing Management - IIFinancial Accounting Human Resource ManagementQuantitative Techniques in Management Production & Operations ManagementMarketing Management - I Corporate Environment Computer Application in Business Cost & Management Accounting Values & Ethics in Management Business Data ProcessingCommunication Skills for Managers Communication & Behavioural Skills

THIRD SEMESTER FOURTH SEMESTER Business Policy & Strategic Management Project ManagementOperations Research for Industry Quality Control & ManagementBusiness Law Technology & Innovation Management Industry Internship Project Final Semester ProjectFinance Group Finance GroupSecurity Analysis and Portfolio Management Financial Planning & Control SystemsTaxation Planning & Management Financial Engineering and Derivatives MgmtBehavioural Finanace International FinanceMarketing Group Marketing GroupBrand Management & Advertising Marketing Research and CRMSupply Chain Management Rural Marketing Concepts and Practices Consumer Behavioural Analysis and Retailing Marketing of ServicesHR Group HR GroupHuman Resource Planning & Development Performance Appraisal, Training & Development,Industrial Relations Strategic Human Resource ManagementManaging Organisational Change & Develop-ment

Negotiation & Counseling

Production Group Production GroupTQM and Six Sigma Supply Chain & Logistics ManagementService Operation Management TPM & Lean ManufacturingOperation Strategy Planning & Control Modern Operations Research Techniques for Industry

FOURTH SEMESTERElective paper (Any one)Travel and Tourism ManagementInternational Marketing & TradeManagement of Non-Government OrganizationsInfrastructure ManagementHealth Care Management


Event ManagementComputer Aided Project ManagementEnterprise Resource PlanningE-CommerceConstruction ManagementManagement of Financial Services

Other Activities: Industrial visits are conducted from time to time to ensure that the students get the requisite exposure to the corporate world. The students had the privileged of visiting Bongaigaon Refinery, Hindustan Paper Cor-poration,(Jagi Road), Emami Limited, Jyothy Laboratories, Guwahati Refinery, West Assam Milk Producers’ Co-operative Union Limited, Hindustan Coca-Cola Beverages Pvt. Limited, CG Foods, Sun Pharmaceuticals and Alkem Laboratories, Sikkim, SRD Nutrients, Marico Limited.

The department also organized the following seminars:

• Seminar on ‘Employee Empowerment : Issues and Challenges’ on March 14, 2012.• Seminar on ‘Individual Transformation: Key to Nation Building’ on February 13, 2013.• Seminar on ‘Voluntary Blood Donation and Preventation of HIV/AIDS’ on April 11, 2013. • Seminar on ‘Motivation and Employability Skills of MBA Graduates’.Dr. Anil Kapur, President, Sales & Marketing, Topcem Cement, was the keynote speaker.

One day workshop on ‘Computer Application in Social Science Research’ was conducted on March1, 2017. The department also observed ‘Vigilance Awareness Week’ from October 31 to November 5, 2016.



MASTER OF

COMPUTER APPLICATIONThe Department of Computer Application was started in the year 2009 with the objective of promoting specialized knowledge in the field of Computer Science and Application. Initially, the department offered a full-time MCA programme under Gauhati University. However, from 2013, the department has been of-fering a full-time three-year Master in Computer Application (MCA) under Assam Science and Technology University (ASTU).

The MCA programme includes course work, summer project and dissertation. It covers pure computer subjects , namely, Data Structures, Algorithms, Computer Organization, Graph Theory, Object Oriented Pro-gramming and Design, Computer Graphics, Software Engineering, Formal Language and Formata Theory, Computer Networks, and many more.

Programme DetailsDegree offered : Master of Computer Application (MCA) (Affiliated to Assam Science and Technology University)Duration : 3 years (6 semester)Intake : 30 (1st semester level) 06 (3rd semester level) – lateral entry

Core subjects offered: Introductory Programming Digital Systems Theory of Computer Science Accounting and Financial Management Computer Oriented Numerical Methods Data and File Structure Computer Architecture and Organization



Computer based Optimization Techniques Graph Theory Probability and Statistics System Software Database Management Systems – I & II Management Information System Object Oriented Programming and Design Computer Graphics and Multimedia Operating Systems Software Engineering Computer Network Design and Analysis of Algorithms Data Warehousing and Data Mining Web Technology Artificial Intelligence System Development Project

Elective Subjects - I Microprocessor and Embedded Design Distributed Systems Expert Systems Image Processing Biologically Implied Computing Programming Language and Paradigms

Elective Subjects - II Cryptography and Network Security Information Storage and Retrieval Multimedia Systems Simulation and Modeling Remote Sensing and GIS Mobile Computing

Laboratory: The department has six laboratories, each having high end computers running on wide variety of operating system including Linux, Windows Vista/7/8. All the machines are equipped with latest Intel® Core™ 2 Duo processor having memory upto 2.00 GB and is connected to the online UPS. The laboratory is also equipped with a high speed IBM server with multicore computing facility. The laboratory is providing client–server computing facility to all the 90 computers with the IBM Server. The server, workstations and the PC terminals are connected to the campus wide gigabit compatible LAN with access to the Internet. The laboratory is equipped with up-to-date DBMS packages, graphics and animation packages, multime-dia authoring packages, GIS packages & browsers, Skylab in addition to the various state-of-the art com-pilers and programming environments, and office automation software. Moreover, Workstation computers have mobile application development facilities.




M.TECH IN COMPUTER SCIENCE & ENGINEERING

The P.G. programme in Computer Science and Engineering was conducted by Department of Computer Science and Engineering from the year 2012 under Gauhati University. Initially the department offered M.E. in Computer Science and Engineering, but later on when the institute was affiliated to Assam Science and Technology University, the department has been offering the degree M.Tech. in Computer Science and Engineering.

The basic aim of the programme is to create technocrates in the field of computer science and engineer-ing who can serve the nation in research and technology including higher engineering studies. There are around 20 core and elective subjects including the project works.

Following are the list of different laboratories:

Name of the laboratory Tools and Software usedProgramming Lab Turbo C, Dev C, GCC, Java, C++RDBMS Lab Oracle 11g on IBM server and Oracle 11client on client comput-

ers, My SQL, SQL ServerProject Lab Dreamweaver, Komodo Edit, HTML 5, CSS, Eclipse, Android ADT,

Java ME, Delvic JVM, Apache Server, IIS, Glassfish,Tomcat etc on IBM server and Eclipse, Net beans etc on client side with Filezilla as FTP client.

Networking Lab Interconnecting devices (L2,L3,Switch, Cisco Router)Mobile Application Lab Android StudioR & D Lab Matlab, Wireshark, WEKA, Hadoop Cluster, Respberry Pi, Arduino,

Spider, SWI Prolog, GC Prolog

Other Activities: The department organized a National Workshop on Mobile Application Development.The department also organized an Inter-college Technical Quiz Competition – Digifact.The department has also started a training programme namely ‘Linux Server Administration’ which is one of the most sought after training program in today’s software industry.


Programme DetailsDegree offered : M.Tech. in Computer Science and Engineering (Affiliated to Assam Science and Technology University)Duration : 2 years (4 semester)Intake : 18 Nos


Core subjects offered: Advanced Data Structure and Algorithms Design of Computerized Systems Mathematical Foundation of Computer Science Distributed Systems Cryptography & Network Security Software Engineering Methodologies Web Technology Natural Language Processing Artificial Intelligence Multimedia System Cloud Computing Embedded System Data Mining & Warehousing Advanced Operating System Mobile Computing Object Oriented Analysis & Design Image Processing Advanced Database Protocol Engineering Soft Computing Advanced Design & analysis of Algorithms Software Testing and Quality Assurance Game Theory Fault tolerant systems Advanced Networks Advanced Computer Architecture

Laboratories: The Department of Computer Science and Engineering has eight laboratories with about 200 computers running on Linux and Windows with adequate software support. Most machines are wireless networked and are connected to leased internet facility.Operating Systems Laboratory• Programming Laboratory I & II• Information Management Laboratory• Network Programming Laboratory• Project Laboratory• Research Laboratory (MODROB)• Data Analysis Laboratory


M.TECH. IN ELECTRONICS AND COMMUNICATIONS ENGINEERING

The Department of Electronics and Communication Engineering started the Master of Technology in Elec-tronics and Communication Engineering in the year 2014 with the approval from AICTE and affiliation from Assam Science and Technology University.The main objective of starting the programme is to create Masters in Electronics Engineering to fulfill the need of higher academic research and industrial need to cope with the present era of technology.

Programme DetailsDegree offered : M.Tech. in Electronics and Communication Engineering (Affiliated to Assam Science and Technology University)Duration : 2 years (4 semester)Intake : 18 Nos

Core subjects offered: Linear Algebra and Optimization Photonics and Optical Communication Digital IC Design Advanced Digital Communication Advanced Networks Semiconductor Device Modeling Image Processing and Pattern Recognition Wireless Communication VLSI System Design



Analog IC Design Statistical Communication Speech Signal Processing Fundamentals of VLSI CAD Cryptography and Network Security VLSI DSP Biomedical Signal Processing VLSI System Testing

Laboratories: Communication System Simulation VLSI Lab – I

The department has ceated three additional laboratories exclusively for the M.Tech. programme. These advanced laboratories are set-up for the post graduate students towards pioneering applied research.

CADENCE VIRTUOSO : This tool introduces various stages of IC designing, complex and high level SOC’s. The future and scope of VLSI is immense in NANO – electronics and Micro – electronics. VLSI Engineers and Designers are among the most highly paid professionals in the industry.

LABVIEW : This tool introduces system design platform and development environment. Through its ability to integrate with hardware world, its acceptance is wide across various industries around the world.

XilinxISESystemEdition12.3(DesignSuite): This tool provides us a platform for digital circuit design in component as well as system level. It supports FPGA and CPLD devices for SPARTAN and VIRTEX-6 family that allows powerful DSP functionality in an embedded design or extending DSP design through embedded processor capabilities.



M.TECH. IN INSTRUMENTATION AND CONTROL ENGINEERING

The Department of Applied Electronics and Instrumentation Engineering started the Master of Technology (M. Tech.) programme in Instrumentation and Control Engineering (ICE) from August 2014. The programme is affiliated to the Assam Science and Technology University (ASTU), Assam.

Programme DetailsDegree offered : M.Tech. in Electronics and Communication Engineering (Affiliated to Assam Science and Technology University)Duration : 2 years (4 semester)Intake : 18 Nos

Core and elective subjects offered: Advanced Instrumentation and Measurement Systems Advanced Control System Applied Mathematics Advanced Process Control Advanced Microcontroller and Embedded System Design Nonlinear System Control Advanced Sensor Technology Process Dynamics and Control Advanced Electronic Instrumentation Instrumentation for Environmental Analysis Digital Control System Design Fuzzy Logic, Neural Networks and Control Adaptive Control



Advanced Medical Instrumentation Fiber Optic and Laser Instrumentation Process Modeling and Simulation Optical Control Theory Advanced Virtual Instrumentation Advanced Digital Signal Processing Engineering Optimization Remote Sensing and Control Industrial Communication Industrial Automation and Robotics

Laboratories:The department is enriched with following state of art laboratories

Transducer Laboratory Power Electronics Laboratory Network Theory Laboratory Digital Electronics and Logic Design Laboratory Electronic Devices and Circuits Laboratory NUMAC (Numerical Methods and Computing) Laboratory Control System Laboratory Electrical and Electronic Measurement Laboratory Optical Fiber Instrumentation Laboratory Industrial Instrumentation Laboratory Process Control Laboratory Microprocessor Laboratory Project Laboratory – Hardware and Software




SUPPORTING CELLS

Internal Quality Assurance CellThe Internal Quality Assurance Cell is the academic body responsible for making policies and imple-ment the same thing to maintain the quality and standard of education as per norms of affiliating and approved bodies.

Functions• Growth and application of quality parameters for various academic and administrative activities

of the institution including UG, PG, research programmes.• Facilitating the creation of a learner-centric environment conducive to quality education and

faculty maturation to adopt the required knowledge and technology for participatory teaching and learning process as per norms of accredited bodies.

• Collection of feedback response from students, parents and other stakeholders on quality-related institutional processes

• Dissemination of information on various quality parameters of higher education• Organization of inter and intra institutional workshops, seminars on quality related themes and

promotion of quality circles• Documentation of the various programmes/ activities leading to quality improvement• Acting as a nodal agency of the institution for coordinating quality-related activities, including

adoption and dissemination of best practices• Development and maintenance of institutional database through MIS for the purpose of main-

taining/ enhancing the institutional quality• Development of Quality Culture in the institution• Preparation of the Annual Quality Assurance Report as per guidelines and parameters of As-

sessment bodies.


Examination CellThe Examination Cell has been set up for smooth functioning of Institutional and University Evaluation processes including mid-semester examination, end semester examination, practical examination, thesis/dissertation evaluations.

FunctionsKeep all communications with affiliating University and submit necessary documents required by the University authority.

Submit internal evaluation marks, such as mid-term examination, continuous evaluation, skill test marks together with attendance information to the affiliating University

Notify mid term examination, end semester practical examinations schedules in discussion with the departments.

Conduct the University Examination such as Mid Term Exam, End Term Exam, and any other Special Exam as notified by the affiliating University.

Collect and distribute the results and mark sheets to the Department or to the students.

Forward the students’ examination related applications to the University for consideration.

Research & Consultancy CellRealizing the immense importance of research for promoting innovative ideas in the technical field, the institute thrives to be on the forefront of research and consultancy activities. With this purpose in mind, the Research and Consultancy Cell was established on the 9th April, 2016 with some faculty members as working members and the Heads / incharges of different departments as advisory members.

Research and Consultancy Cell promotes, coordinates, records and regulates all sponsored, collaborative research projects and consultancy works in the institute.

VisionTo imbibe the culture of research and consultancy among faculty and students and disseminate knowl-edge to the society in emerging and challenging areas of science, engineering, management and human-ities.

MissionTo create awareness, opportunities and a conducive atmosphere in research among the students and faculty members.



To create good infrastructure for facilitating research and developing research culture.

To motivate the faculty and students to take up research projects and improve their knowledge and skills.

To assist faculty members in acquiring funds from external agencies/ institutes.

To develop strategies to foster research collaborations with external agencies / institutes.

To encourage faculty to undertake industrial consultancy work.

To encourage faculty and students to publish technical papers in refereed national and international journals / conferences.

The Research and Consultancy (R&C) Cell organized a Lecture Session on Research Methodology and Consultancy Activities on 12th Dec, 2016. The Speakers for the Session were - Prof. Kali Prasad Sarma, Professor, Department of Geological Sciences, Gauhati University and Prof. Sukumar Nandi, Professor, Department of Computer Science and Engineering, IIT Guwahati.

The Cell also organized a talk on “Career Enhancement through Research and Consultancy” by Dr. Gaurav Trivedi, Department of Electronics and Electrical Engineering, IIT Guwahati on April 9, 2016.



CENTRE FOR CAREER DEVELOPMENT



The Centre for Career Development provides the platform to the students for entrepreneurial ventures, groom them to face the corporate world and also provide job avenues to them.

The Centre for Career Development has three cells operating under its wing – Entrepreneurship Develop-ment Cell, Finishing School and Training & Placement Cell.

Entrepreneurship Development CellThe institute has set up Entrepreneurship Development Cell (EDC) with objective of inculcating entrepre-neurial culture into the minds of the students and nurturing the entrepreneurial spirit among the leaders of the future generation. Ever since the inception, the Cell has been providing platform and mentorship to the students interested in entrepreneurship and nurtures them to be successful entrepreneurs with a vision to transform the society and promote the culture of encouraging job creators than job seekers. The Cell functions in a spacious building located in the college premises. The institute had received a grant of 8 lacs for the EDC Scheme from AICTE. Accordingly, project started from March 2011, even though the real operation started from September 2011. The project ended on March 2014. After the successful comple-tion of the EDC project, the institute took over the functioning pof the cell and accordingly a committee for the Entrepreneurship Development Cell was constituted on November 2014.

Activities:The Entrepreneurship Development Cell had conducted an Entrepreneurship Awareness Programme for students in association with Indian Institute of Entrepreneurship (IIE), Guwahati with participants from both the Engineering and Management disciplines. The cell conducted a “Business Skill Development Pro-gramme” in association with MSME-DI, Guwahati. Also, one day workshop on Bamboo Products in Assam. Expert talks on entrepreneurship were also being conducted by the cell where entrepreneurs from diverse fields addressed the students and provided them with valuable inputs.In the year 2017, GIMT – Guwahati has been empanelled under the Pradhan Mantri YUVA (Pradhan Mantri Yuva Udyamita Vikas Abhiyan) Yojana with an aim to create an enabling ecosystem for entrepreneurship development through entrepreneurship education & training, advocacy and easy access to entrepreneur-ship network. The project also aims to promote development of social enterprises for inclusive growth. The project will be implementated in collaboration with Wadhwani Foundation, a California (USA) based non-profit public benefit corporation for duration of five years.

Finishing SchoolThe Finishing School is a part of the GIMT learning experience, which operates with a steadfast com-mitment towards increasing the employability of our graduates. It acts as that bridge students need to cross to step from college to industry. The programme is tailored to make our fresh graduates INDUSTRY – READY by providing them a balanced set of technical skills, communication and interpersonal skills, industry exposure and a positive attitude to work and live.

Activities of the School: The Finishing School conducts an array of Technical training Certificate courses offered by IIT Bom-



bay Spoken Tutorial in association with Ministry of Human Resource Development (MHRD) as part of its Mission for Education – Information and Communication Technology (ICT). These courses are selected to cater to specific and latest industry needs.

Regular classes in communication skills and soft skills. Sessions are provided on CV and resume writing, group discussion sessions, interview performance and behaviour, communication and presentation skills, personality development, time management skills, negotiation skills, interper-sonal and team management etc.

Aptitude Test classes on quantitative aptitude, logical reasoning and English aptitude which give students required training to get placed during campus interviews.

Guest Lectures and student workshops by industry professionals. This becomes a huge opportunity for students to have a workplace orientation and learn about real time projects and workplace culture, ethics and related experiences.

Facilities:A dedicated conference room modeled Finishing School Classroom with audio-visual facilities to conduct aptitude test and communication and soft skills classes.

Well-equipped computer lab with 50 computers to conduct technical courses.Certification:

Technical Training courses certified by IIT Bombay Spoken Tutorials.

One year certificate course in Communications and Soft Skills development.

Employability Enhancement Training Programe (EETP) under AICTE-ICT Academy MOU.

Training & Placement CellThe Training & Placement Cell plays a pivotal role in building an interface between academia and corpo-rate houses by organizing various seminars, pre-placement talks, work-shops, training programs, industrial visits, summer placements and campus placements. The Training and Placement Cell maintains a close liaison with the Corporate Houses and other employers in order to facilitate the placement of the students. Moreover, the Cell tries to arrange interaction of the students with professionals from industry regularly so as to provide them with first-hand knowledge of the ever changing technology. Earnest efforts are made to attract the best of the recruiters to pick up our students both via on-campus and off-campus recruitment process. The target, obviously, is to have all our students suitably placed be-fore their final semester examinations.

The Training & Placement Cell has the requisite state- of- the- art infrastructure to conduct various pro-



grams such as campus drives, seminars, workshops and training sessions.

Facilities: Air-conditioned auditorium for conducting pre-placement talks and seminars with LCD projector and PA systems.

Well furnished rooms for conducting group discussions and interviews.

Computer lab available with large number of systems interconnected by LAN and high speed inter-net for online tests.

A well maintained and hygienic cafeteria is available for recreation of guests and also students.

The placement policies and other related activities are handled by the Training & Placement Officer in consultation with the Faculty Coordinators and Student Representatives. The entire process of recruitment starting from identifying, contacting the possible recruiting corporate houses to organizing campus inter-views is handled by the Placement Cell which consists of the TPO, Faculty Coordinators and nominated students from the departments.

Placement Procedure:•Our placement season starts from August 2017 and continues till July 2018 for the batch of students passing out in 2018.

•Invitations are sent to the companies by the Training & Placement Officer (TPO).

•On receiving the eligibility criteria from a company/organization, a list of interested students satisfying the eligibility criteria of the company concerned is prepared and the requisite data forwarded to the com-pany concerned.

•A suitable date for the company’s visit is worked out.

•After confirmation the placement cell arranges a Pre-Placement Talk.

•The company conducts its selection and shortlists students for the interview.

•The concerned company comes for campus interview and the result is announced usually on the same day.




Recruiters List:

Absolute Surveyors Private Limited Fanuc India Pvt. LimitedAbutani Trucking Fin-Advisor Consulting Pvt. LtdAhura Mazda Metal Forming & Finishing Garuda Power Pvt. LimitedAkzonobel India Limited GenpactAlembic Getit Infoservices Pvt. LimitedAlankrit Limited Godrej & Boyce Manufacturing Company LimitedAmazon India Greenlam Industries Ltd.Amrit Cement Industries Limited HDFC BankArden Telecom High-Technext Engineering and Telecom Pvt. LimitedArihant Trading Company Horizon TelecomAssam Gramin Vikash Bank I Serve Communication Private LimitedAssam Power Generation Corporation Limited IBM India Pvt. Ltd.Autometers Alliance Limited Incredible Infosoft Solutions India Pvt. LimitedAxis Bank India FirstBharti Airtel Limited Integrated Wireless Solutions Pvt. LimitedBIOCON Janalakshmi Financial ServicesBioMerieux India Pvt. Ltd. JBS Enterprises Pvt. LimitedBohniman Systems Private Limited J.U.D. Cements LtdBosch Limited Just Dial LimitedBrahmaputra Harley-Davidson Jenson and NicholsonBridgestone India Private Limited Joyshree PowerolBrigosha Technologies Pvt. Limited Kalpataru Power Transmission LimitedCapital Via Global Research Limited Kurlon Enterprise LimitedCapitalAim Financial Advisory Pvt. Limited Larsen & Toubro Infotech LimitedCalcom Cement India Limited Luit MineralsCeasefire Industries Limited Lupin LimitedCement Manufacturing Company Limited Maithan AlloysConcierge Technologies Meghalaya Cements LimitedCummins India Limited Meghmallar Estates and Services Private LimitedDidactic Systems India Pvt. Ltd Mitcon Consultancy & Engg. Services LimitedDiebold Systems Pvt. Limited Mukand Systems & Marketing Pvt. LimitedEllmech Institute of Technology (P) Limited Mphasis LimitedEmami Limited Nexa GuwahatiEricsson NURD TechVariable Pvt. LimitedEthnus Consultancy Services Pvt. Limited Nvaid Pvt. LimitedEverest Industries Limited Onquest Laboratories LimitedExiliant Technology Pvt. Ltd. OPPO Mobiles Keteki Pvt. LimitedForce Motors Limited Paramount Tea MarketingFalqume India Technology Pvt. Limited Pearson Education



PepsiCo India Holdings Private Limited Sony Entertainment TelevisionPHI Learning Private Limited Sony India Pvt. Ltd.Power Networks Engineers Private Limited Spider Tech Management Pvt. LimitedPradan Subham GroupPuri Telecom Services Pvt.Ltd Sunrise Biscuit Company Private LimitedRama University Syntel LimitedReliance BIG TV Tech Mahindra LimitedReliance Broadcast Telecom Network Solutions Private LimitedReliance Jio Infocomm Technowell Services Pvt. LimitedReliance Life Insurance Thomas CookRural Electrification Corporation Limited Transasia Bio-Medicals LtdSAHAJ Varun Beverages LimitedSBI Life Insurance Company Limited VLCCSeven Sisters Kawasaki Vodafone Spacetel LimitedShiv-Vani Oil & Gas Exploration Services Ltd VST Industries LimitedShriram Transport Finance Co. Limited WiproSLK Software Services Pvt. Limited Xeality IT Technologies Pvt. Limited.XL Dynamics India Pvt. Ltd. Yebhi.comZaloni Technologies India Pvt. Ltd Zantrik Technologies Pvt. Limited



BEYOND ACADEMICS



The institute promotes and nourishes a perfect blend of academic and co-curricular excellence.

GIMT Initiatives

“GIMT INITIATIVES” is a process of initiating groundbreaking change in the society. At GIMT, these ini-tiatives are converted into pledges and thereafter into action so that the entire fraternity of students and faculty works together to turn GIMT into an institute with a difference, with an endeavor.

Apart from the academics, extracurricular activities are given equal significance. For the purpose various clubs like career counseling, cultural, handicraft, drama, literature, photography, quiz, debate, robotics etc., have been set up under the guidance of ex-perts for the all round development and quality output. National seminars, workshops, training camps are often organized to facilitate the students in developing their lead-ership skills and sense of responsibility towards their assigned duty. Past years have

continuously witnessed some major social activities like tree plantations within the campus as well as in the surrounding areas, various awareness drives under “Swach Bharat Abhijan” like distribution of dustbins in various selected schools of Guwahati, initiated state-level cleanliness projects and organized various prize money competitions among school students, blood donation camps, health camps etc.

Besides this, a number of interactive sessions with experts from industry and technical arena are often initiated to motivate the students and provide an insight into some major challenges of practical life. In-dustrial visits and tours are conducted mainly for the pre-final year students to strengthen their theoretical knowledge and to build confidence for survival.

The wall magazine “UTTARAN” and the college magazine “GIMTECH” are incredible initiatives in the field of literary works.

SAMANTRANA is another initiative in bridging the gap between industry and academia. The first edition of two day National Seminar was a joint venture by GIMT Guwahati and Tezpur along with collaborative partner AICTE and ASTU. Eminent speakers from both industry and academia had a fruitful discussion on different aspects of industry-academia collaboration. Some of the noted speakers were Prof. Dhiraj Bora, VC, ASTU, Prof. Gautam Barua, Mentor Director, IIIT Guwahati, Prof. A K Das, Professor, IITG and Interim Director, IIIT Manipur, Dr. Anil Kapur, President (Sales), Topcem India, Mr. Harsh Manglik, Ms. Amreeta Mazumdar, Head of Tech Staffing, Google India, Mr. DP Das, Senior Deputy General Manager - HR, Larsen & Toubro Limited.

Girijananda Chowdhury Institute of Management and Technology organized the second edition of SAMAN-TRANA, two day National Seminar on the theme “Role and Importance of Research in Technical Education” on 18th and 19th January, 2018 at the campus.



EUPHUISM…………..Celebrating lifeThe advent of the New Year fills the ambiance with the symphony of its annual gala fest “EUPHUISM” that had a mega start in the year 2009. “EUPHUISM” is normally organized with 3-day programme that includes 2 sensational pro nites. During the three day extravaganza various intercollege events are organized viz. quiz, debate, photography contest, movie making, ad-making, essay writing, singing & dancing competitions etc. In addition inter-college technical events like Robotics, Cryptex, Circuitronics, Computer Gaming are also part of the fest. Fun games like 5-a-side football, inter-college cricket match etc., are also part of this event. Pass three years have witnessed mass participation of students from various colleges.

“GLITTERS” the personality contest is one of the main attraction of the plethora of events held during Eu-phuism judged by variuos cine stars, reputed models and industry person adding an extravagant touch to the event.

The most awaited cultural nites have to its credit, the enthralling performances of both national as well as international bands like “EUPHORIA” IN 2009, “STRANGE BREW” (Pune based rock band) and “BOMBAY ROCKERS” from Amsterdam in 2010. “JUNKYARD GROOVE” (Chennai based rock band) and Zubeen Garg along with Zublee and Dikshu gave a sparkling performance in 2011, while RAGHU DIXIT PROJECT AND HIGHER ON MAIDEN (an official tribute to IRON MAIDEN) rocked the show in 2012. “PAPON AND THE EAST INDIA COMPANY” and local sensation Simanta Shekhar mesmerized the audience in 2014, bollywood sen-sation Suraj Jagan gave a riveting show in 2015, exciting concert of Clinton Cerejo band from Bollywood in 2017.

Euphuism 18 ‘Eunonia’ too concluded successfully on 16th February, 2018. During these event, various activities were organized on this theme towards a beautiful world by creating beautiful mind, which included Flash Mobs, Charity activities in Old Age Home and Orphanages. It was a big forum of similar minds to inter-act , share and discuss the latest happenings in management, technical and cultural field.

The main event is preceded by a sports week that embraces various intra-college events – Cricket, Football, Volleyball and individual events like Carom, Chess, Badminton, Table Tennis etc. A half marathon was con-ducted on 20th January and finally with a three day event from 14th February to 16th February. Besides, there were various Inter Colleges Competitions held in Photography, Computer gaming, Debate, Quiz (Quiz-zard), Song (Suryatra, Dance (Cavosisto), Handicraft, Drama etc. These events were widely participated by students from various institutes of the state and the region and judged by distinguished personalities in the respective fields. The fest was inaugurated on 14th February, in the august presence of Shri Nitu-moni Saikia, Editor in Chief of Pratidin Time along with a galaxy of other guests. The fest concluded with a memorable cultural night on 16th February by famous upcoming Bollywood sensational singer Siddharth Mahadevan who mesmerized the 5,000 plus crowd with his famous Bollywood numbers.

Euphuism is not only an amusement event but through it, the institute also targets some social responsibil-ity for which it organizes a signature campaign taking up certain social issues.

Training and Placement Cell

Sourobh Mazinder Barua, Training & Placement Officer, Email: [email protected], [email protected] Phone: 0361-2843507 Cell: (+91) 9854075379, (+91) 9864348588.

Arup Kumar DasOffice Assistant (T&P Cell)Email: [email protected]: (+91) 7002935262

Faculty Co-ordinators

Mr. Rajib Bhowmik, Asst. Professor, Department of Mechanical Engineering, Cell: (+91) 9864655583, Email: [email protected]

Mr. Rakesh Nath, Asst. Professor, Department of Mechanical Engineering, Cell: (+91) 8486781900, Email: [email protected]

Ms. Gargi Kashyap,Asst. Professor, Department of Electronics & Communication Engineering, Cell: (+91) 9864504213, Email: [email protected]

Mr. Syed Ashique Hussain,Asst. Professor, Department of Electrical Engineering, Cell: (+91) 9864983904, Email: [email protected]

Dr. Sandip Bordoloi,HOD (i/c), Department of Applied Electronics and Instrumentation Engineering, Cell: (+91) 9957430428, Email: [email protected]

Ms. Shrabani Medhi,Asst. Professor, Department of Computer Science & Engineering, Cell: (+91) 8135811784, Email: [email protected]

Mr. Saurav Jyoti Parasor,(Asst. Professor, Department of Civil Engineering), Cell: (+91) 8412042215, Email: [email protected]

Mr. Arnab Kumar Das,(Asst. Professor, Department of Computer Application), Cell: (+91) 9435145017, Email: [email protected]

Mr. Dhruva Jyoti Sharma,(Asst. Professor, Department of Business Administration), Cell: (+91) 8011835762, Email: [email protected]

Girijananda Chowdhury Institute of Management and Technology is con-veniently located at Azara, Guwahati on the National Highway No. 37, away the hustle of Guwahati city, providing a congenial atmosphere for diligent academic pursuit. It is an idyllic spot located five km to the east of Lokapri-ya Gopinath Bordoli International Air-port and 16 km to the west of Guwa-hati Railway Station. Sprawled over more than 6 acres of land, it is on the bank of the famous Deepor Beel, a natural water body which is a heaven for birdwatchers and lovers of aquat-ic life. The majestic Khasi & Jayantia hills stand on the southern side of the “Beel”, providing a green picturesque view that is soothing to the eye. The college is well connected to the city and to all other places of the country through various modes of public and private transport.

LOCATION

CONTACT USGirijananda Chowdhury Institute of Management and Technology (GIMT),Azara, Hatkhowapara, N.H.No-37, Guwahati, Assam-781017, India.

Design by : Tarique Mahmood (8876692586)

Documents

Guide 2018 -19 · (CSE), Mechanical Engineering (M.E.), Electrical Engineering (EE), Electronics & Communication Engineering (ECE)) were provisionally accredit-ed by the National