Embed Size (px)
Citation preview
for Rubber, Latex & Tire Industries
8-11 March 2016, BITEC, Bangkok, Thailand
Specialized Courses by Well-Experienced International ExpertsSuitable for Technicians, Engineers and Managers
GRTE 2016 - Training Courses
3rd International Exhibition for Rubber, Latex & Tire Industries
9-11 March 2016BITEC, Bangkok, Thailand
Organized by
www.grte-expo.com / www.rubbertechnology-expo.com
120 Courses in 4 Days
GRTE 2016 - Educational Training Courses ScheduleDate Schedule Course Title Instructor
09 March 2016 16.00-18.00 hrs Testing of Latex and Latex Dipped Products David Hill
09 March 2016 16.00-18.00 hrs Pulse-Fill Molding Techniques Van Walworth
09 March 2016 16.00-18.00 hrs Testing of Cable Compounds and Final Cables Dr. Gerd Schmaucks
09 March 2016 16.00-18.00 hrs Blooming/Solubility of Ingredients in Rubber Dr. Hans-Joachim Graf
09 March 2016 16.00-18.00 hrs Polymer and Elastomer in Cable Applications Prof. Dipak Khastigar
09 March 2016 16.00-18.00 hrs Global Tire Regulations Niteesh Shukla
09 March 2016 16.00-18.00 hrs Electron Beam and Gamma Radiation Curing of Tyre , Belt and Profile Dr. SK Chakraborthy
09 March 2016 16.00-18.00 hrs Rubber Formulation Development Prof. Anil K. Bhowmick
10 MARCH 2016 / THURSDAY 10 March 2016 10.00-12.00 hrs Solid Tire Technology Dr. Samir Majumdar
10 March 2016 10.00-12.00 hrs Latex Additives and Rubber Chemicals Prof. CC Ho
10 March 2016 10.00-12.00 hrs Rubber Extrusion Downstream Equipment: Curing and Hose Manufacture Dr. James Stevenson
10 March 2016 10.00-12.00 hrs Troubleshooting Rubber Transfer Molding Van Walworth
10 March 2016 10.00-12.00 hrs Cost Estimating for Rubber Products Terry Chapin
10 March 2016 10.00-12.00 hrs Selection of Textile Reinforcement for Different Rubber Products Prof. Dipak Khastigar
10 March 2016 10.00-12.00 hrs Rubber Processing Aids: Basics, Testings and Applications Dr. Krisda Suchiva
10 March 2016 10.00-12.00 hrs Analysiss of Rubber Rheological Results Dr. Chakrit Sirisinha
10 March 2016 12.00-14.00 hrs Process Validation of Dipped Latex Articles David Hill
10 March 2016 12.00-14.00 hrs Uniformity and Balancing of Tires Niteesh Shukla
10 March 2016 12.00-14.00 hrs Simulation of Testing of Rubber Products at laboratory and field Dr. SK Chakraborthy
10 March 2016 12.00-14.00 hrs Property Optimization of Reclaimed Rubber by Process Control Dr. Rani Joseph
10 March 2016 12.00-14.00 hrs EPDM Elastomers: Chemistry and properties Dr. Guy Wouters
10 March 2016 12.00-14.00 hrs Dynamic Durability and Tear Resistance of Filled Rubber Dr. Robert Schuster
10 March 2016 12.00-14.00 hrs Rubber Extrusion Dr. Gerard Nijman
10 March 2016 12.00-14.00 hrs Rubber Nanocomposites – Future trends Dr. K Rajkumar
10 March 2016 14.00-16.00 hrs Tire Curing Air Bags – Manufacture Dr. Samir Majumdar
10 March 2016 14.00-16.00 hrs Characterization of Latex Dispersion Prof. CC Ho
10 March 2016 14.00-16.00 hrs Understanding Rubber Extrusion Line Performance Dr. James Stevenson
10 March 2016 14.00-16.00 hrs Selection of the Molding Process for Rubber Parts Terry Chapin
10 March 2016 14.00-16.00 hrs Modified Natural Rubber Dr. Krisda Suchiva
10 March 2016 14.00-16.00 hrs Oil Resistance of Rubber - under the Hood and Oil Well Applications Dr. Robert Schuster
10 March 2016 14.00-16.00 hrs Laboratory Physical Testing Methods Zacharia George
10 March 2016 14.00-16.00 hrs Reverse Engineering of Rubber Products - An Overview Dr. K Rajkumar
10 March 2016 16.00-18.00 hrs Cost Saving Opportunities in Latex Processing David Hill
10 March 2016 16.00-18.00 hrs Optimized Productivity and Quality for Extruded Rubber Products Dr. James Stevenson
10 March 2016 16.00-18.00 hrs Mold Preform Preparation, Storage, Handling, Placement Van Walworth
10 March 2016 16.00-18.00 hrs V Belt - An Overview Prof. Dipak Khastigar
10 March 2016 16.00-18.00 hrs Intelligent Tire Selection Criteria Niteesh Shukla
10 March 2016 16.00-18.00 hrs Quality control for Auto Rubber Products Dr. SK Chakraborthy
10 March 2016 16.00-18.00 hrs Pyrolysis Process for Recovery of Oil, Carbon black & Steel from Used Tires Dr. Rani Joseph
10 March 2016 16.00-18.00 hrs EPDM Elastomers: Compounding and Applications Dr. Guy Wouters
11 MARCH 2016 / FRIDAY 11 March 2016 10.00-12.00 hrs Common Problems in Rubber Compounding Plant & Troubleshooting Dr. Samir Majumdar
11 March 2016 10.00-12.00 hrs Monitoring, Causes of Variation, and Control for Complex Rubber Profiles Dr. James Stevenson
11 March 2016 10.00-12.00 hrs Tear-Trims, Over-Flows, and Vents Van Walworth
11 March 2016 10.00-12.00 hrs Nine Steps to Injection Molding Optimization Dr. Hans-Joachim Graf
11 March 2016 10.00-12.00 hrs Dynamic Properties of Rubbers and Their Applications Dr.Woothichai T
11 March 2016 10.00-12.00 hrs Rubbers for Pressure-sensitive Adhesives Dr. Guy Wouters
11 March 2016 10.00-12.00 hrs Speciality Rubbers Dr. Robert Schuster
11 March 2016 10.00-12.00 hrs Rubber Vulcanization and Cure Evaluation Zacharia George
11 March 2016 10.00-12.00 hrs Thermoplastic Elastomers Prof. Anil K. Bhowmick
11 March 2016 12.00-14.00 hrs Defect Analysis & Troubleshooting of Latex Dipped Product Manufacturing David Hill
11 March 2016 12.00-14.00 hrs Basic Rubber Product material Selction Overview Terry Chapin
11 March 2016 12.00-14.00 hrs Adhesion: Principles and Troubleshooting Dr. Hans-Joachim Graf
11 March 2016 12.00-14.00 hrs Compound Design for Specialized Applications Dr. Rani Joseph
11 March 2016 12.00-14.00 hrs Potentials of High Aspect Ratio Fillers to Increase Elastomer Performance Dr. Robert Schuster
11 March 2016 12.00-14.00 hrs Continuous Vulcanization Dr. Gerard Nijman
11 March 2016 12.00-14.00 hrs Flouro Elastomers : Principles and Processing Mitul Vora
11 March 2016 12.00-14.00 hrs Cables with Special Requirements - Fire Retardency, Oil Resistance, Flexibility Dr. Gerd Schmaucks
08 MARCH 2016 / TUESDAY 08 March 2016 10.00-12.00 hrs Synthetic Rubber: Types, Selection, Applications Dr. Samir Majumdar
08 March 2016 10.00-12.00 hrs Rubber Extrusion Pumps: Screw and Barrel Designs Dr. James Stevenson
08 March 2016 10.00-12.00 hrs Troubleshooting Rubber Compression Molding Van Walworth
08 March 2016 10.00-12.00 hrs Latest Developments in Retreading Process Dr. Rani Joseph
08 March 2016 10.00-12.00 hrs Principles of Rubber Compounding Dr. Guy Wouters
08 March 2016 10.00-12.00 hrs Rubber Blends - from Theory to Applications in Compounding Dr. Robert Schuster
08 March 2016 10.00-12.00 hrs Rubber Rheology and Processability Dr. Gerard Nijman
08 March 2016 10.00-12.00 hrs Rubber Mixing Technology - Equipment, Methods and Monitoring Zacharia George
08 March 2016 12.00-14.00 hrs Natural Rubber Latex Properties Prof. CC Ho
08 March 2016 12.00-14.00 hrs Rubber Mould Fouling and Prevention Dr. Hans-Joachim Graf
08 March 2016 12.00-14.00 hrs Rubber Conveyor Belt Technology & Manufacture Prof. Dipak Khastigar
08 March 2016 12.00-14.00 hrs Selection of Rubber for Auto Components Dr. SK Chakraborthy
08 March 2016 12.00-14.00 hrs Impact of Filler Dispersion on Compound Quality Dr. Robert Schuster
08 March 2016 12.00-14.00 hrs Cost of Poor Quality – a Measure to Alert SME Rubber Industries Dr. K Rajkumar
08 March 2016 12.00-14.00 hrs Rubber Product Molding & Process Overview for the Non-Technologist Terry Chapin
08 March 2016 12.00-14.00 hrs Cable Types - International Standards and Specifications Dr. Gerd Schmaucks
08 March 2016 14.00-16.00 hrs Rubber Chemicals: Types, Selection, Applications Dr. Samir Majumdar
08 March 2016 14.00-16.00 hrs Latex Compounding Principles David Hill
08 March 2016 14.00-16.00 hrs Rubber Extrusion Heads: Inline, Cross, Tyre, Roller, Dynamic & Robotic Dr. James Stevenson
08 March 2016 14.00-16.00 hrs Energy Management for Rubber Molding Van Walworth
08 March 2016 14.00-16.00 hrs Compound Design for High Performance Retreads Dr. Rani Joseph
08 March 2016 14.00-16.00 hrs Introduction to Polymer chemistry Dr. Guy Wouters
08 March 2016 14.00-16.00 hrs Mixing of Rubber Dr. Gerard Nijman
08 March 2016 14.00-16.00 hrs Raw Material Quality Assessment Zacharia George
08 March 2016 16.00-18.00 hrs Halobutyl based Innerliner Technology for Tubeless Tires Dr. Samir Majumdar
08 March 2016 16.00-18.00 hrs Synthetic Latexes and Their Properties Prof. CC Ho
08 March 2016 16.00-18.00 hrs Reading Technical Drawings for Rubber Products Van Walworth
08 March 2016 16.00-18.00 hrs Compounding for Performance and Cost Dr. Hans-Joachim Graf
08 March 2016 16.00-18.00 hrs Metal Rubber Bonding Prof. Dipak Khastigar
08 March 2016 16.00-18.00 hrs Manufacturing of Processing of Hose, Profile and Auto tube Dr. SK Chakraborthy
08 March 2016 16.00-18.00 hrs Vulcanization Chemistry – Mechanisms and Property Control Dr. Robert Schuster
08 March 2016 16.00-18.00 hrs Dynamic Mechanical Testing of Rubber Products Dr. K Rajkumar
08 March 2016 16.00-18.00 hrs Material Choice for Cables - Polymers, Fillers and Additives Dr. Gerd Schmaucks
09 MARCH 2016 / WEDNESDAY 09 March 2016 10.00-12.00 hrs Heat-Resistant Chlorobutyl based Innertube Technology Dr. Samir Majumdar
09 March 2016 10.00-12.00 hrs Instrumentation and Analytical Techniques for Latex Dispersion Prof. CC Ho
09 March 2016 10.00-12.00 hrs Hot Feed Rubber Extruders and Lines for Tyres and Mixer Drops Dr. James Stevenson
09 March 2016 10.00-12.00 hrs Prototyping Rubber Samples Rapidly Van Walworth
09 March 2016 10.00-12.00 hrs Rubber Compound Rheology and Mold Design Dr. Hans-Joachim Graf
09 March 2016 10.00-12.00 hrs Rubber Seals & Gaskets Prof. Dipak Khastigar
09 March 2016 10.00-12.00 hrs Introduction to Elastomers Technology Dr. Guy Wouters
09 March 2016 10.00-12.00 hrs Reactive Mixing of Silica Compounds Dr. Gerard Nijman
09 March 2016 10.00-12.00 hrs Cable Compounding and Processing Methods Dr. Gerd Schmaucks
09 March 2016 12.00-14.00 hrs Latex Stability and Film Forming David Hill
09 March 2016 12.00-14.00 hrs Principles of Rubber Molding using Vacuum Terry Chapin
09 March 2016 12.00-14.00 hrs Tire Safety Test Methods & Standards Niteesh Shukla
09 March 2016 12.00-14.00 hrs Physical and Chemical Testing of Rubber Products Dr. SK Chakraborthy
09 March 2016 12.00-14.00 hrs Reliability Studies on Rubber Products Dr. Rani Joseph
09 March 2016 12.00-14.00 hrs Oxidative Ageing of Rubbers - Influence of Polymer Structure & Antioxidants Dr. Robert Schuster
09 March 2016 12.00-14.00 hrs Calendering with Rubber Dr. Gerard Nijman
09 March 2016 12.00-14.00 hrs An Approach to Failure Investigation of Rubber Products Dr. K Rajkumar
09 March 2016 14.00-16.00 hrs Perfect Tire Retreading - Best Practices Danilo Pasotti
09 March 2016 14.00-16.00 hrs Latest Technologies of Tire Curing Bladder Dr. Samir Majumdar
09 March 2016 14.00-16.00 hrs Latex Compounding and Vulcanization of Latex Prof. CC Ho
09 March 2016 14.00-16.00 hrs Profile Die Design and Operation for Rubber Seals Dr. James Stevenson
09 March 2016 14.00-16.00 hrs Troubleshooting Rubber Injection Molding Van Walworth
09 March 2016 14.00-16.00 hrs Rubber Testing Overview in a Changing Global Economy John Dick
09 March 2016 14.00-16.00 hrs Electron Beam and gamma radiation curing of Tyre , Belt and profile Dr. SK Chakraborthy
09 March 2016 14.00-16.00 hrs Synthetic Elastomers manufacturing processes and related features Dr. Guy Wouters
09 March 2016 14.00-16.00 hrs Silica / Silane Technology - Internal Mixer as Chemical Reactor Dr. Robert Schuster
09 March 2016 16.00-18.00 hrs Tire Reclaiming Technology Dr. Samir Majumdar
GRTE 2016 - Educational Training Courses ScheduleDate Schedule Course Title Instructor
Remark : The organizers reserve the right to change schedule of any course without prior notice due to unforseen circustances. Delegates are requested to visit www.gret-expo.com for the latest schedule. There will be more courses to be added before the expo dates.
NOTE : All Courses will be conducted in ENGLISH only.
09 March 2016 16.00-18.00 hrs Testing of Latex and Latex Dipped Products David Hill
09 March 2016 16.00-18.00 hrs Pulse-Fill Molding Techniques Van Walworth
09 March 2016 16.00-18.00 hrs Testing of Cable Compounds and Final Cables Dr. Gerd Schmaucks
09 March 2016 16.00-18.00 hrs Blooming/Solubility of Ingredients in Rubber Dr. Hans-Joachim Graf
09 March 2016 16.00-18.00 hrs Polymer and Elastomer in Cable Applications Prof. Dipak Khastigar
09 March 2016 16.00-18.00 hrs Global Tire Regulations Niteesh Shukla
09 March 2016 16.00-18.00 hrs Electron Beam and Gamma Radiation Curing of Tyre , Belt and Profile Dr. SK Chakraborthy
09 March 2016 16.00-18.00 hrs Rubber Formulation Development Prof. Anil K. Bhowmick
10 MARCH 2016 / THURSDAY 10 March 2016 10.00-12.00 hrs Solid Tire Technology Dr. Samir Majumdar
10 March 2016 10.00-12.00 hrs Latex Additives and Rubber Chemicals Prof. CC Ho
10 March 2016 10.00-12.00 hrs Rubber Extrusion Downstream Equipment: Curing and Hose Manufacture Dr. James Stevenson
10 March 2016 10.00-12.00 hrs Troubleshooting Rubber Transfer Molding Van Walworth
10 March 2016 10.00-12.00 hrs Cost Estimating for Rubber Products Terry Chapin
10 March 2016 10.00-12.00 hrs Selection of Textile Reinforcement for Different Rubber Products Prof. Dipak Khastigar
10 March 2016 10.00-12.00 hrs Rubber Processing Aids: Basics, Testings and Applications Dr. Krisda Suchiva
10 March 2016 10.00-12.00 hrs Analysiss of Rubber Rheological Results Dr. Chakrit Sirisinha
10 March 2016 12.00-14.00 hrs Process Validation of Dipped Latex Articles David Hill
10 March 2016 12.00-14.00 hrs Uniformity and Balancing of Tires Niteesh Shukla
10 March 2016 12.00-14.00 hrs Simulation of Testing of Rubber Products at laboratory and field Dr. SK Chakraborthy
10 March 2016 12.00-14.00 hrs Property Optimization of Reclaimed Rubber by Process Control Dr. Rani Joseph
10 March 2016 12.00-14.00 hrs EPDM Elastomers: Chemistry and properties Dr. Guy Wouters
10 March 2016 12.00-14.00 hrs Dynamic Durability and Tear Resistance of Filled Rubber Dr. Robert Schuster
10 March 2016 12.00-14.00 hrs Rubber Extrusion Dr. Gerard Nijman
10 March 2016 12.00-14.00 hrs Rubber Nanocomposites – Future trends Dr. K Rajkumar
10 March 2016 14.00-16.00 hrs Tire Curing Air Bags – Manufacture Dr. Samir Majumdar
10 March 2016 14.00-16.00 hrs Characterization of Latex Dispersion Prof. CC Ho
10 March 2016 14.00-16.00 hrs Understanding Rubber Extrusion Line Performance Dr. James Stevenson
10 March 2016 14.00-16.00 hrs Selection of the Molding Process for Rubber Parts Terry Chapin
10 March 2016 14.00-16.00 hrs Modified Natural Rubber Dr. Krisda Suchiva
10 March 2016 14.00-16.00 hrs Oil Resistance of Rubber - under the Hood and Oil Well Applications Dr. Robert Schuster
10 March 2016 14.00-16.00 hrs Laboratory Physical Testing Methods Zacharia George
10 March 2016 14.00-16.00 hrs Reverse Engineering of Rubber Products - An Overview Dr. K Rajkumar
10 March 2016 16.00-18.00 hrs Cost Saving Opportunities in Latex Processing David Hill
10 March 2016 16.00-18.00 hrs Optimized Productivity and Quality for Extruded Rubber Products Dr. James Stevenson
10 March 2016 16.00-18.00 hrs Mold Preform Preparation, Storage, Handling, Placement Van Walworth
10 March 2016 16.00-18.00 hrs V Belt - An Overview Prof. Dipak Khastigar
10 March 2016 16.00-18.00 hrs Intelligent Tire Selection Criteria Niteesh Shukla
10 March 2016 16.00-18.00 hrs Quality control for Auto Rubber Products Dr. SK Chakraborthy
10 March 2016 16.00-18.00 hrs Pyrolysis Process for Recovery of Oil, Carbon black & Steel from Used Tires Dr. Rani Joseph
10 March 2016 16.00-18.00 hrs EPDM Elastomers: Compounding and Applications Dr. Guy Wouters
11 MARCH 2016 / FRIDAY 11 March 2016 10.00-12.00 hrs Common Problems in Rubber Compounding Plant & Troubleshooting Dr. Samir Majumdar
11 March 2016 10.00-12.00 hrs Monitoring, Causes of Variation, and Control for Complex Rubber Profiles Dr. James Stevenson
11 March 2016 10.00-12.00 hrs Tear-Trims, Over-Flows, and Vents Van Walworth
11 March 2016 10.00-12.00 hrs Nine Steps to Injection Molding Optimization Dr. Hans-Joachim Graf
11 March 2016 10.00-12.00 hrs Dynamic Properties of Rubbers and Their Applications Dr.Woothichai T
11 March 2016 10.00-12.00 hrs Rubbers for Pressure-sensitive Adhesives Dr. Guy Wouters
11 March 2016 10.00-12.00 hrs Speciality Rubbers Dr. Robert Schuster
11 March 2016 10.00-12.00 hrs Rubber Vulcanization and Cure Evaluation Zacharia George
11 March 2016 10.00-12.00 hrs Thermoplastic Elastomers Prof. Anil K. Bhowmick
11 March 2016 12.00-14.00 hrs Defect Analysis & Troubleshooting of Latex Dipped Product Manufacturing David Hill
11 March 2016 12.00-14.00 hrs Basic Rubber Product material Selction Overview Terry Chapin
11 March 2016 12.00-14.00 hrs Adhesion: Principles and Troubleshooting Dr. Hans-Joachim Graf
11 March 2016 12.00-14.00 hrs Compound Design for Specialized Applications Dr. Rani Joseph
11 March 2016 12.00-14.00 hrs Potentials of High Aspect Ratio Fillers to Increase Elastomer Performance Dr. Robert Schuster
11 March 2016 12.00-14.00 hrs Continuous Vulcanization Dr. Gerard Nijman
11 March 2016 12.00-14.00 hrs Flouro Elastomers : Principles and Processing Mitul Vora
11 March 2016 12.00-14.00 hrs Cables with Special Requirements - Fire Retardency, Oil Resistance, Flexibility Dr. Gerd Schmaucks
08 MARCH 2016 / TUESDAY 08 March 2016 10.00-12.00 hrs Synthetic Rubber: Types, Selection, Applications Dr. Samir Majumdar
08 March 2016 10.00-12.00 hrs Rubber Extrusion Pumps: Screw and Barrel Designs Dr. James Stevenson
08 March 2016 10.00-12.00 hrs Troubleshooting Rubber Compression Molding Van Walworth
08 March 2016 10.00-12.00 hrs Latest Developments in Retreading Process Dr. Rani Joseph
08 March 2016 10.00-12.00 hrs Principles of Rubber Compounding Dr. Guy Wouters
08 March 2016 10.00-12.00 hrs Rubber Blends - from Theory to Applications in Compounding Dr. Robert Schuster
08 March 2016 10.00-12.00 hrs Rubber Rheology and Processability Dr. Gerard Nijman
08 March 2016 10.00-12.00 hrs Rubber Mixing Technology - Equipment, Methods and Monitoring Zacharia George
08 March 2016 12.00-14.00 hrs Natural Rubber Latex Properties Prof. CC Ho
08 March 2016 12.00-14.00 hrs Rubber Mould Fouling and Prevention Dr. Hans-Joachim Graf
08 March 2016 12.00-14.00 hrs Rubber Conveyor Belt Technology & Manufacture Prof. Dipak Khastigar
08 March 2016 12.00-14.00 hrs Selection of Rubber for Auto Components Dr. SK Chakraborthy
08 March 2016 12.00-14.00 hrs Impact of Filler Dispersion on Compound Quality Dr. Robert Schuster
08 March 2016 12.00-14.00 hrs Cost of Poor Quality – a Measure to Alert SME Rubber Industries Dr. K Rajkumar
08 March 2016 12.00-14.00 hrs Rubber Product Molding & Process Overview for the Non-Technologist Terry Chapin
08 March 2016 12.00-14.00 hrs Cable Types - International Standards and Specifications Dr. Gerd Schmaucks
08 March 2016 14.00-16.00 hrs Rubber Chemicals: Types, Selection, Applications Dr. Samir Majumdar
08 March 2016 14.00-16.00 hrs Latex Compounding Principles David Hill
08 March 2016 14.00-16.00 hrs Rubber Extrusion Heads: Inline, Cross, Tyre, Roller, Dynamic & Robotic Dr. James Stevenson
08 March 2016 14.00-16.00 hrs Energy Management for Rubber Molding Van Walworth
08 March 2016 14.00-16.00 hrs Compound Design for High Performance Retreads Dr. Rani Joseph
08 March 2016 14.00-16.00 hrs Introduction to Polymer chemistry Dr. Guy Wouters
08 March 2016 14.00-16.00 hrs Mixing of Rubber Dr. Gerard Nijman
08 March 2016 14.00-16.00 hrs Raw Material Quality Assessment Zacharia George
08 March 2016 16.00-18.00 hrs Halobutyl based Innerliner Technology for Tubeless Tires Dr. Samir Majumdar
08 March 2016 16.00-18.00 hrs Synthetic Latexes and Their Properties Prof. CC Ho
08 March 2016 16.00-18.00 hrs Reading Technical Drawings for Rubber Products Van Walworth
08 March 2016 16.00-18.00 hrs Compounding for Performance and Cost Dr. Hans-Joachim Graf
08 March 2016 16.00-18.00 hrs Metal Rubber Bonding Prof. Dipak Khastigar
08 March 2016 16.00-18.00 hrs Manufacturing of Processing of Hose, Profile and Auto tube Dr. SK Chakraborthy
08 March 2016 16.00-18.00 hrs Vulcanization Chemistry – Mechanisms and Property Control Dr. Robert Schuster
08 March 2016 16.00-18.00 hrs Dynamic Mechanical Testing of Rubber Products Dr. K Rajkumar
08 March 2016 16.00-18.00 hrs Material Choice for Cables - Polymers, Fillers and Additives Dr. Gerd Schmaucks
09 MARCH 2016 / WEDNESDAY 09 March 2016 10.00-12.00 hrs Heat-Resistant Chlorobutyl based Innertube Technology Dr. Samir Majumdar
09 March 2016 10.00-12.00 hrs Instrumentation and Analytical Techniques for Latex Dispersion Prof. CC Ho
09 March 2016 10.00-12.00 hrs Hot Feed Rubber Extruders and Lines for Tyres and Mixer Drops Dr. James Stevenson
09 March 2016 10.00-12.00 hrs Prototyping Rubber Samples Rapidly Van Walworth
09 March 2016 10.00-12.00 hrs Rubber Compound Rheology and Mold Design Dr. Hans-Joachim Graf
09 March 2016 10.00-12.00 hrs Rubber Seals & Gaskets Prof. Dipak Khastigar
09 March 2016 10.00-12.00 hrs Introduction to Elastomers Technology Dr. Guy Wouters
09 March 2016 10.00-12.00 hrs Reactive Mixing of Silica Compounds Dr. Gerard Nijman
09 March 2016 10.00-12.00 hrs Cable Compounding and Processing Methods Dr. Gerd Schmaucks
09 March 2016 12.00-14.00 hrs Latex Stability and Film Forming David Hill
09 March 2016 12.00-14.00 hrs Principles of Rubber Molding using Vacuum Terry Chapin
09 March 2016 12.00-14.00 hrs Tire Safety Test Methods & Standards Niteesh Shukla
09 March 2016 12.00-14.00 hrs Physical and Chemical Testing of Rubber Products Dr. SK Chakraborthy
09 March 2016 12.00-14.00 hrs Reliability Studies on Rubber Products Dr. Rani Joseph
09 March 2016 12.00-14.00 hrs Oxidative Ageing of Rubbers - Influence of Polymer Structure & Antioxidants Dr. Robert Schuster
09 March 2016 12.00-14.00 hrs Calendering with Rubber Dr. Gerard Nijman
09 March 2016 12.00-14.00 hrs An Approach to Failure Investigation of Rubber Products Dr. K Rajkumar
09 March 2016 14.00-16.00 hrs Perfect Tire Retreading - Best Practices Danilo Pasotti
09 March 2016 14.00-16.00 hrs Latest Technologies of Tire Curing Bladder Dr. Samir Majumdar
09 March 2016 14.00-16.00 hrs Latex Compounding and Vulcanization of Latex Prof. CC Ho
09 March 2016 14.00-16.00 hrs Profile Die Design and Operation for Rubber Seals Dr. James Stevenson
09 March 2016 14.00-16.00 hrs Troubleshooting Rubber Injection Molding Van Walworth
09 March 2016 14.00-16.00 hrs Rubber Testing Overview in a Changing Global Economy John Dick
09 March 2016 14.00-16.00 hrs Electron Beam and gamma radiation curing of Tyre , Belt and profile Dr. SK Chakraborthy
09 March 2016 14.00-16.00 hrs Synthetic Elastomers manufacturing processes and related features Dr. Guy Wouters
09 March 2016 14.00-16.00 hrs Silica / Silane Technology - Internal Mixer as Chemical Reactor Dr. Robert Schuster
09 March 2016 16.00-18.00 hrs Tire Reclaiming Technology Dr. Samir Majumdar
8-11 March 2016, BITEC, Bangkok, Thailand@ GRTE 2016 - Global Rubber, Latex & Tire Expo 2016
Order Form - GRTE 2016 Training Course Tickets
Ticket cost includes course documentation, lunch and refreshments
Buy......25 TicketsGet........5 Tickets
FREE
Total Number of Tickets .................. Early Bird Discount ...................... Total Cost ..............................+ VAT 7% = ............................US$
No of Tickets 1-3 Tickets 4-6 Tickets 7-10 Tickets More than 10 Tickets
Cost/Ticket 150 US$ 135 US$ 120 US$ 100 US$
THAILAND (Secretariat)
TechnoBiz Communications Co., Ltd.2521/27, Lardprao Road, Khlongchaokhunsingha,Wangthonglang, Bangkok 10310 ThailandTel: +66-2-933 0077 Fax: +66-2-955 9971Mobile: +66-81-988 6874Email: [email protected] / [email protected]: www.rubbertechnology-expo.com / www.grte-expo.com
CHINAChina United Rubber CorporationTel: +86 10 58650282 Email: [email protected]
USATechnoBiz USA Inc.Tel: 1-615- 443-0094 Email: [email protected]
INDIATechnoBiz Consulting (South Asia) Pvt. Ltd. Tel: +91 -9492 812 519 Email: [email protected]
GERMANYTechnoBiz Europe (HJG Consulting) Tel: +49-151 2000 6394 Email: [email protected]
