A solution provider of environmentally‐friendly Electrical and Instrumentation for the Oil & Gas industry

We believe that energy generation solutions should be environmentally

sustainable, commercially viable and socially responsible.

Greentech International Pte LtdD2A Singapore Pte Ltd

Partnering , we are able to provide a complete system including Isolation switches,transformer, control and monitoring panels, power connections, heating cable, endterminations, and related accessories.

We manage the heat you need towards your pipe freeze protection, process temperature maintenance and process heat‐up applications.

Our customers include:

Engineering Solution – Ind. Heat Tracing

5 GOOD Reasons to buy from us:‐1. We provide a complete design system that meets your requirements.

2. We have ready stock for additional lines and quick project turn around

3. We are open to accept surplus material to be returned.

4. We provide training to your in house contractors with transparency man hour pricing, hence manage project within budget.

5. We provide optional supervision from initial installation to complete system turn on.

Enclosure Solutions

Electrical Control Panel & Enclosure

IP66 Junction Boxes that can be used in heavy-duty industries Stainless Steel 304 or 316L, or Powder Coated Steel Our Panels are designed and tested to meet stringent site conditions

Junction boxes made from 12, 14 or 16 gauge Stainless Steel 304 or 316L, Powder Coated Steel, or Glass Reinforced Polyester Can be used as Electrical Panels & Control Boxes

Lighting Audit

Our audits will enable our clients to Minimize the number of lights used, while having the Maximum Lumen using modern technologies. We are able to cater Dali Lighting Control System for central monitoring.

Ship Interior Lightings

Industrial Lightings Hangar Lightings

Our audits consist of: Visit to client’s facilities to evaluate current lumen output Design & Provide comprehensive lighting proposal as per site condition Provide lumen check after installation

Ex EXIT Emergencyfixture

4ft LED LinearLuminaire

Ex LEDFloodlight

ATEX/IECEX Electrical System

R Stahl is a leading supplier of products and explosion protected system. The productsrange from Lighting, field function boxes, socket & plugs, signalling devices, safetyswitches to distribution panels.

Field Junction Boxes Distribution Panels

Switch Sockets & Plugs

GRP Control Station

Safety Switches and LoadDisconnect Switches

InstallationSwitches

Coupler Sockets Customise Sockets Assembly

Panel Mount ControlSS Control Box

UL/CSA CL1 Div1&2 Electrical Solution

Emerson/Appleton provide the most trusted, rugged electrical solution for Industrial andHazardous environments across the world. The certified protection products range fromfitting, lighting, and power distribution solution.

NEC/CEC Custom Switchracks UL Circuit Breaker Panelboards

UL Conduit Fitting

Plugs & Receptacles

GUA Conduit Outlet Boxes Flameproof Enlcosure

LED Ex Floodlight LED Rigmaster Linear LED Low Profile Fixtures

Ex Temporary Lighting

Wolf Safety offer a wide range of ATEX/IECEX certified Temporary Lighting for use inHazardous location. The range include LOW VOLTAGE linear LED and LED floodlights,Handheld leadlamps, battery operated LED worklights and compressed air operatedpneumatic lamps for confined spaces.

LINKEX Temporary Luminairies &

Floodlights

LINKEX Tank Lighting Kits

Portable Lighting

Handheld Leadlamps Airlamps

Rechargeable floodlights &

worklights

Rechargeable Handlamps Rechargeable TorchesLED Ex Headtorch

Temporary Lighting

Micro & Mini Ex Torches Straight & Right-Angled Ex Torches

Ex Class 1 Div 1&2 LED fixtures - SafeSite

Dialight is an Industrial LED lighting supplier that provide full integrated products for heavyduty application, featuring custom in‐house power supply designed for long life withsuperior temperature tolerance, vibration resistance and built‐in surge protection. AllSafesite LED lighting comes with 5 & 10 years warranty.

LED Ex High Bay/Floodlight

• UL844 (C1D1, C1D2)

• 8,000‐27,000 lumens

• Up to 145lm/W

• 10years warranty

LED Ex Floodlight

LED Ex Area Light

• UL844 (C1D1, C1D2)

• 2,800‐9,000 lumens

• Up to 143lm/W

• 10years warranty

LED Ex Street Light

• IECEx/ATEX (Zone 2)

• 5,500‐20,250 lumens

• Up to 85lm/W

• 7years warranty

LED Ex D1 Linear

• UL844 (C1D1, C1D2)

• 3,600‐7,250 lumens

• Up to 106lm/W

• 5years warranty

(Exclude Battery)

LED Ex Linear

• UL844 (C1D2)

• 2,700‐7,250 lumens

• Up to 110lm/W

• 5years warranty

• UL844 (C1D2) CSA

• 10,000‐15,000 lumens

• Up to 111lm/W

• 10years warranty

LED Ex Bulkhead/Emergency

• UL844 (C1D2, C1Z1)

• 600‐2,250 lumens

• Up to 66lm/W

• 5years warranty

LED Ex Obstruction Light

• UL844 (C1D2) FAA, ICAO

• 32 cd

• 120‐240VAC, 12‐48VDC

• 5years warranty

Zone 1 Flexible Conduit System

Combining Flexible Conduit System with Flameproof Ex d glands help to ensure cables andwire are mechanically protected without compromising on safety.

• Simplified termination• Reduce installation times• Cable is mechanically protected• Can provide EMC screening• Flameproof integrity• Future proofing – easier to upgrade

Ex Static ignition risk control

INDICATION | MONITORING

Bond-Rite®CLAMP

Bond-Rite®EZ

Bond-Rite®REMOTE

Bond-Rite®EZ

FM/ATEX TESTED AND APPROVED

The accumulation of static electricity must be avoided in EX areas. Protecting personal and assets from static ignition hazard.

Day to day responsibility for grounding and bonding will most likely rest with operators. Because static is not a visible or tangible hazard, a lack of understanding can lead to complacency or honest mistakes that result in electrostatic ignitions.

INDICATION | MONITORING | INTERLOCK

Ex Static ignition risk control

Earth-Rite®RTR Earth-Rite®MGV

Earth-Rite®FIBC Earth-Rite®PLUS

Earth-Rite®MULTIPOINT II

Lightning Surge Protection

Furse’s Lightning Surge Protection is fully endorsed by the IEC/BS EN 62305, as well as NFPA780 standards. Their equipment delivers effective life safety, together with long lasting,reliable protection of a structure and the electronic system within it.

Air Rod Strike pad

Conductor

Air Rod Base

Air Termination

Bare Copper Tape Bare Aluminum Tape Tinned Copper Tape

Conductor accessories

Tape clip Non-metallic tape clip Square tape clamp

Bimetallic Connector Test/Junction Clamp

Lightning Surge Protection

Earth Bond

Surge Protective Device

MMP 2C275

ESP 415: Mains Supplies – Equipotential Bonding

Rod to Tape Clamp (Type A) ‘U’ Bolt Rod Clamp (Type GUV) Rebar to Rebar Connecting Clip

Four Hole Earth Point B Bond

2 Wired System (Flat Mount) ESP SL15X (ATEX/IEC)

ESP Cat-5e & Cat-6/PoE

Cable Cleats

CMP Products designs and manufactures both IEC and NEC cable glands, Cleats and associated products for installation in Marine/Industrial and Explosive environments.

Conqueror RTSS - 196kA Peak

Bespoke Trefoil, Single and Joint Bay Cleats for High Voltage Application

Sovereign HDSS - 190kA Peak Patriot SDSS - 135kA Peak

Fire Performance Cable Cleat

Cable Glands & Accessories

E1FU – For X/Y/Z Cable A2F - For Unamour Cable

PX2KREX – For X/Y/Z Cable, IIC

TMC2X – For MC/MCHL Cable

757 Ex e/d Hex Head Plug

737 Ex e/d Reducer Adaptor

TC – For TC Cable

TE1FU – For X/Y/Z Cable *Stainless Steel*

747 Ex e/d Recessed Plug

781 Ex e/d Breather Drain

C1D1&2 MCHL Fire Resistant Cable

Okonite Okotherm® CIC Fire Resistant Cable —Type MC-HL C-L-XOkotherm CIC cables maintain circuit integrity based on qualification to the modified IEC standard 60331 for all temperatures and times up to and including 2000°F (1000degC) for three hours.

CIC 600V Power Cable

A Tinned or Nickel Coated Copper Conductors

B Okotherm (Silicone) Thermoset Insulation

C Coated Copper Grounding Conductor

D Fiberglass Braid - Coded per ICEA

E Glass Fillers

F Cable Tape

G Impervious, Continuous, Corrugated,

Aluminum C-L-X SheathH Black Okoseal Jacket

CIC 600V Instrument Cable

A Tinned or Nickel Coated Copper Conductors

B Okotherm (Silicone) Thermoset Insulation

C Fiberglass Braid

D Ftwisted, Shielded Pairs/Triads

E Nickel or Tinned Coated Copper Drain Wire

F Glass Fillers, as needed

G Aluminum-Mylar Shield Tape

H Impervious, Continuous, Corrugated,

Aluminum C-L-X SheathJ Black Okoseal Jacket

Colour Coded Cable Transit System

Hawke Transit System is the only Totally-Inspectable system on the market.The Tolerant Blocks use a colour coding system to minimise incorrect installation.This feature is unique to Hawke Transit System.Also, the min and max cable O/D is clearly marked on the block as to which that particular block will seal. Both features enable post inspections of installed transits, increasing the safety and reliability of the installations.

One Piece Solution

One Look Inspection

Wiring Accessories

Panduit provide wiring accessories from wire marker, cable markers system, cable ties, cable lugs and pipe marking system. Etc.

Cable Marking System

Cable Cleats

Colour Coded Lugs – AWG & MM

SS Ball Lock Tiies

Cable Identification Solutions

What is cable identification?

Cable identification is labelling of a cable or a wire and allowing the user to trace & troubleshoot

effectively and efficiently. The labelling is usually in the form of a using a specific markers or labels,

and are fixed to a cable or wire.

Why choose Greentech?

In Greentech International, we provide quality Polyester tags for Indoor Application to Stainless Steel

tags that can withstand Harsh Weather conditions!

Let us know where you want your tags to be, and we will provide the best solutions to your needs.

MMP337W53-MAL-43mm Font: 20 Characters

Max. Per Line, 8 Lines Max

5mm Font: 14 CharactersMax. Per Line, 8 Lines Max

Plate Thickness: .015”-.016”(.38mm-.40mm)

Material: ALUM & Polyester

MMP337W71-MAL-33mm Font: 20 Characters

Max. Per Line, 9 Lines Max

5mm Font: 14 CharactersMax. Per Line, 9 Lines Max

Plate Thickness: .015”-.16”(.38mm-.40mm)Material: ALUM

MMP172-M / M3163mm Font: 12 Characters

Max. Per Line, 3 Lines Max

5MM font: 8 CharactersMax. Per Line, 3 Lines Max

Plate Thickness: .10” (.25mm)Material: 304 / 316

Greentech International Pte Ltd

D2A Singapore Pte Ltd

Address: 136 Joo Seng Road #03‐02,

Singapore 368360

+65 6748 3348

+65 6748 8900

inquiry@greentechinternational.com

Tel:

Fax:

Email

ThailandSingapore

Tel:

Fax:

Email

GTI Electrical (M) Sdn Bhd

Address: D4‐07, Street Mall @ One South,

43300 Seri Kembangan,

Selangor DE, Malaysia

+60 3 9543 9798

+60 3 8943 5327

salesmy@greentechinternational.com

Tel:

Fax:

Email

Malaysia Indonesia

PT Greentek Elektrikal Indonesia

Address: The Manhattan Square Building

Mid Tower 12th Floor Unit C‐F

JL. TB. Simatupang Kav. 1‐5

Jakarta 12560

+62 21 8064 1056

wprasto@greentechinternational.com

Tel:

Email

www.greentechinternational.com

Our Offices:

GTI Electrical (Thailand) Co., Ltd

Address: Glas Haus Building, Level P, Unit P01,

1Soi Sukhumvit 25, Sukhumvit Road,

North Klongtoey, Wattana, Bangkok,

Thailand 10110.

+66 2026 0129

+66 2026 0131

GTITH@greentechinternational.com

Brands which we represent