Upload
trinhbao
View
229
Download
0
Embed Size (px)
Citation preview
Preset Dimming Controls
369420c 1 07.16.12
®
Job Name:
Job Number:
Model Numbers:
PageSPecification Submittal
Wireless Control Unit (230 V 865 MHz)
GRAFIK Eye® QS Wireless Control Unit (230 V 865 MHz)
LUTRON
1
2
3
4
DescriptionThe GRAFIK Eye® QS Wireless control unit is the premier energy-saving light and window treatment control. The GRAFIK Eye® QS control unit includes an astronomic timeclock, intuitive lighting presets, and direct window treatment control. Now with wireless technology, you can use the GRAFIK Eye® QS Wireless control unit to seamlessly integrate with a variety of Lutron wireless products and systems, including Radio Powr SavrTM occupancy, vacancy, and daylight sensors, Sivoia® QS Wireless window treatments, Pico® wireless controls, and other GRAFIK Eye® wireless products. Additionally, the GRAFIK Eye® QS Wireless control unit is compatible with all Lutron wired QS products and systems, including Quantum®.
Mechanical Dimensions
119 mm (4$ in)
239 mm (94 in) 10 mm
(4 in) 51 mm (2 in)
Front View Side View
Fits into a 4-gang U.S. backbox, 90.4 mm (3.5 in) deep (Lutron P/N 245-254) or 76.2 mm (3 in) deep (Lutron P/N 241-400)
Preset Dimming Controls
369420c 2 07.16.12
®
Job Name:
Job Number:
Model Numbers:
PageSPecification Submittal
Wireless Control Unit (230 V 865 MHz)
LUTRONLUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRONLUTRON
LUTRON
LUTRON
LUTRON
LUTRON
®
Test
Power
Hi Temp
Ethernet DALI 1 DALI 2
IR
Pho
to
Com
20
V
20 V
Com
MU
X
MU
X
24 V
CO
M
Occ IR
Pho
to
Occ
Energi Savr Node QSTM
QSNE-2DAL-D230 V~ 50/60 Hz 100 mAwww.lutron.com
+44.(0)20.7680.4481L N
1 1 2 2
3 3 4 4QS
8 mm0,5 N∙m
®
Test
Power
Hi Temp
Ethernet DALI 1 DALI 2
IR
Pho
to
Com
20
V
20 V
Com
MU
X
MU
X
24 V
CO
M
Occ IR
Pho
to
Occ
Energi Savr Node QSTM
QSNE-2DAL-D230 V~ 50/60 Hz 100 mAwww.lutron.com
+44.(0)20.7680.4481L N
1 1 2 2
3 3 4 4QS
8 mm0,5 N∙m
LUTRONLUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRONLUTRON
LUTRON
LUTRON
LUTRON
LUTRON
®
Test
Power
Hi Temp
Ethernet DALI 1 DALI 2
IR
Pho
to
Com
20
V
20 V
Com
MU
X
MU
X
24 V
CO
M
Occ IR
Pho
to
Occ
Energi Savr Node QSTM
QSNE-2DAL-D230 V~ 50/60 Hz 100 mAwww.lutron.com
+44.(0)20.7680.4481L N
1 1 2 2
3 3 4 4QS
8 mm0,5 N∙m
®
Test
Power
Hi Temp
Ethernet DALI 1 DALI 2
IR
Pho
to
Com
20
V
20 V
Com
MU
X
MU
X
24 V
CO
M
Occ IR
Pho
to
Occ
Energi Savr Node QSTM
QSNE-2DAL-D230 V~ 50/60 Hz 100 mAwww.lutron.com
+44.(0)20.7680.4481L N
1 1 2 2
3 3 4 4QS
8 mm0,5 N∙m
System TopologiesThe GRAFIK Eye® QS Wireless control unit can be specified in three different system topologies. Examples of each are shown below.
LUTRONLUTRON
LUTRON LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON
LUTRON
LUTRONLUTRON
LUTRON LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON
LUTRON
Example of GRAFIK Eye®-centric Wireless System
Example of Mixed Wired/GRAFIK Eye®-centric Wireless System
Wireless Sivoia® QS
shade
Wireless Sivoia® QS
shade
Wired QS link
Wired occupancy
sensor
Wireless occupancy
sensor
10 m (30 ft)
wireless range; 20 m (60 ft)
in open air
GRAFIK Eye® QS wireless control unit
GRAFIK Eye® QS wireless control unit
seeTouch® QS
wallstation
seeTouch® QS
wallstationWireless
occupancy sensor
GRAFIK Eye® QS wireless control unit
Example of Wired System
QSE-CI-NWK-E
Sivoia® QS shadeseeTouch®
QS wallstation
seeTouch® QS wallstation
Wired occupancy
sensor
GRAFIK Eye® QS wireless control unit
GRAFIK Eye® QS wireless control unit
Pico® wireless control
Pico® wireless control
Wired QS link
Quantum®
processor
QS Sensor Module
Energi Savr NodeTM unit
Wireless daylight sensor
Wireless daylight sensor
Preset Dimming Controls
369420c 3 07.16.12
®
Job Name:
Job Number:
Model Numbers:
PageSPecification Submittal
Wireless Control Unit (230 V 865 MHz)
Features•Lutron’sproprietaryClearConnect® RF technology.
Operates in 865 MHz band.•Pushbuttonrecalloffourpresetlightingscenes,
plus Off.•Sixteen(16)totalavailablescenes,plusOffscene.•Zonescancontrolmanylightsourcetypesdirectly
or through power modules. •Optionalintegratedwindowtreatmentcontrol
buttons, which can also be added to the unit after installation.
•Masteroverridebuttonstoraiseandloweralllights.
•Allowssetupoflightingscenesandwindowtreatment presets using buttons on the control unit.
•Built-ininfrared(IR)receiver.•ExternalIRconnection.•Built-inastronomictimeclock.• Infoscreenshowszonelightlevelpercentage,
energy savings, zone labeling, and programming.•Lockoutoptionpreventsaccidentalchanges.•Occupancysensorinputand24V power for one
occupancy sensor.•QScommunicationlinkforseamlessintegrationof
lights, motorized window treatments, wallstations, and integration interfaces.
•CompatiblewithallLutronQSsystemcomponents.
•Wirelesscommunicationforseamlessintegrationwith a variety of Lutron wireless products and systems, including Radio Powr SavrTM occupancy and vacancy sensors, Sivoia® QS wireless window treatments, Pico® wireless control, and other GRAFIK Eye® QS wireless products.
•Backlitbuttonswithengravingmakeuniteasytolocate and operate.
•Availableinavarietyofcolorsandfinishes.
LUTRON
OK
1 2 3 4 5 6
Optional window treatment control keypad
Zone control
Infrared receiver
USBTypeminiB
Info screen
Scene control keypad
Note: Symbol-based Engraving (-SGN) shown.
1
2
3
4
1
2
3
4
Preset Dimming Controls
369420c 4 07.16.12
®
Job Name:
Job Number:
Model Numbers:
PageSPecification Submittal
Wireless Control Unit (230 V 865 MHz)
Key Design Features•ProtectionClass:IP20.•LightningstrikeprotectionmeetsANSI/IEEEstandard62.41-
1980. Can withstand voltage surges of up to 6 000 V and current surges of up to 3 000 A.
•Testedtowithstand16kVelectrostaticdischargewithoutdamage or memory loss.
•RTISSTM-equipped:Compensatesinrealtimeforincomingline voltage variations (no visible flicker with +/-2% change in RMS voltage per cycle, and +/-2% Hz change in frequency per second).
•Powerfailurememoryretainsprogrammingandlightlevelsettings for up to 10 years in the event of a power loss.
•TheGRAFIKEye® QS control unit supplies 3 Power Draw Units (PDUs) on the QS link. For complete information, see “Power Draw Units on the QS Link,” Lutron P/N 369405.
•Faceplateishingedatthetopandbottom,andstaysopenat 180° for ease of access.
Scene and Shade Buttons•Large,roundedbuttonsareeasytouse.•Backlitbuttonswithoptionalengravingmakeiteasyto
find and to operate the control unit in low light conditions (backlight can be disabled).
•Optionalbuttonengravingisangleduptotheeyeforeasyreading.
•Predefinedlabelstickersareincludedforfieldlabeling.•4presetlightingscenes,plusOff,areaccessiblefromthe
front of the control unit.•12additionalscenesarestoredinthecontrolunitand
are accessible from the integral timeclock, seeTouch® QS wallstations, and QS interfaces.
•Lightlevelsfadesmoothlybetweenscenes.Fadetimecanbesetdifferentlyforeachscene:0to59seconds,or1 to 60 minutes. Maximum fade time from Scene Off is 3 seconds.
Input Power•230V 50 Hz
Environment•0to40°C(32to104°F)•Relativehumiditylessthan90%non-condensing
Regulatory Approvals•WPC
Lighting Sources/Load TypesNote: Maximum load 500 W per zone; 2 300 W total.
•ZonesonEnergiSavrNodeTM products wired to the same QS link
-ZonesonEnergiSavrNodeTM with Softswitch®
-ZonesonEnergiSavrNodeTM for 0-10 V -ZonesonEnergiSavrNodeTM with EcoSystem®
Pleasereferto“RemoteZoneMapping”forimportantinformation.
•DMXchannel(s)throughDMXoutputinterface (QSE-CI-DMX).Pleasereferto“AccessoryControls:DMXOutput Interface”
Zonescanalsocontrolthefollowinglightingsourceswitha smooth, continuous square law dimming curve or on a fullconductionnon-dimbasis:
• Incandescent•Halogen•Magneticlow-voltagetransformer•LutronTu-Wire® electronic fluorescent dimming ballast•Neonandcoldcathode•Non-dim(incandescent,magneticlow-voltage,Tu-Wire®,
or neon/cold cathode) Please refer to “Capacities” for more information.
Zonescanalsocontrolthefollowinglightingsourceswitha smooth, continuous square law dimming curve or on a full conduction non-dim basis through separate Lutron powermodules:
•Electroniclow-voltagetransformers(useELVpowermodule)
•Non-dim(useswitchingmodule)•0-10V(useTVI)
Note:Azonemaybeprogrammedtocontrolonlyoneload type at a time.
Specifications
Preset Dimming Controls
369420c 5 07.16.12
®
Job Name:
Job Number:
Model Numbers:
PageSPecification Submittal
Wireless Control Unit (230 V 865 MHz)
Astronomic Timeclock• Integraltoallunits.•7dailyschedulesavailable.•Oneavailableholidayscheduleisprogrammablebydate
up to one year in advance.•25eventsperdaymaximum.•Timeclockeventsareprogrammabletocontrolscenesthat
affect any Energi Savr NodeTM unit connected on the QS link without changing the local scene on the GRAFIK Eye® QS control unit.
•Astronomictimesareprogrammablebyintegralcitydatabase or by entering latitude and longitude. Sunrise/Sunset times automatically adjust throughout the year based on location.
•AutomaticallyadjustsforDaylightSavingTime(DST); DST is programmable.
•Localtimeclockeventscanactivateanyofthefollowingfeatures:
- Scenes 1 to 16 and Off - Any available window treatment presets - Start and End afterhours mode - Enable and Disable daylighting for all zones/groups - Enable and Disable occupancy for occupancy/vacancy
sensors - Enable and Disable occupied events for all occupancy
sensors
System Communications and Capacities•Low-voltagetypeIECPELV/NEC® Class 2 wiring connects
control units, wallstations, motorized window treatments, and control interfaces.
•AQSsystemcanhaveupto100devicesand100zones.•AQSsystemcanhaveupto30wirelessdevices.
Infrared• Infrared(IR)receiverallowsinfraredtransmitterstoselect8
scenes, raise/lower lighting zones, or raise/lower window treatments.
•Transmitterbuttonsimitatebuttonsonfaceplate.•15m(50ft)lineofsightrange.•Terminalblockinfraredinputforconnectiontoawired
IR input from third-party equipment.• IRcanbedisabledviaprogramming.•WorkswithLutronGRX-ITandGRX-8ITinfraredremote
controls.
Shade Control•TheGRAFIKEye® QS control unit can include up to 3
shade button columns. Each column has backlit open, preset, close, and raise/lower buttons.
•Eachshadebuttoncolumncanbeprogrammedtooperate one shade or a group of shades. (Shades may be assigned to more than one shade button column).
•Faceplatesareavailablewith1,2and3shadebuttoncolumns.
Wirelessshadelimitations:•AccesstotheSivoia® QS Wireless electronic drive unit
(EDU) is required to associate shades with the GRAFIK Eye® QS control unit and set their raise/lower limits.Exception:Sivoia® QS Wireless cellular shades allow limit setting from the GRAFIK Eye® QS wireless control unit.
•Wiredandwirelessshadesmaynotbeprogrammedintothe same shade button column; however, both may be used on the same GRAFIK Eye® QS control unit.
•Scenecommandsthataffectwirelessshadesacrossmultiple shade button columns will have a 1-second delay from column to column. This does not occur in RadioRA® 2 systems.
Zone Control•Eachzonehasadedicatedraiseandlowerbuttonto
adjust the zone.•Eachzonehasadedicated7LEDbargraphforlevel
status. Percentage of light level and energy saved is displayed on the info screen.
•AllzoneinformationhasbluebacklitLEDs.Backlightturns off when idle for 30 seconds.
•High-endandlow-endtrimsettingsareadjustableperzone (high end from 99 to 55%; low end from 45 to 1%). Note:Trimforremotezonesmustbeadjustedlocallyonthe Energi Savr NodeTM unit.
•Eachzoneisprogrammabletoonlyoneloadtypeatatime.
Info Screen•OLED(organicLED)screenisviewablefromallangles.•Screenturnsoffwhenidlefor30seconds.•Programmablezonelabels.•Programmablescenelabels.•Statusofreal-timezonepercentageandenergysavings.•Programmabletimeclockschedules.•Programmableshadelabels.•Selectabledisplaylanguages:
- English - Spanish - French - Italian - German - Portuguese
Specifications
Preset Dimming Controls
369420c 6 07.16.12
®
Job Name:
Job Number:
Model Numbers:
PageSPecification Submittal
Wireless Control Unit (230 V 865 MHz)
Accessory Controls: seeTouch® QS Wallstations (QSWE)
•WiredseeTouch® QS wallstations provide the following features:
- Access to one or more of the 16 scenes on the GRAFIK Eye® QS Wireless control unit
-Zonetoggle,partitioning,sequencing,finetune,panicmode, and timeclock enable/disable
- Contact closure inputs - Certain functions are only available on specific
wallstation configurations. Refer to the seeTouch® QS specification submittal.
Wireless RF Compatibility•Lutron’sproprietaryClearConnect® RF Technology
operates in the 865 MHz band.•CompatiblewithotherLutronwirelessproducts/systems,suchas:
- Pico® wireless control (P/N QSRNP-) - Radio Powr SavrTM occupancy/vacancy/daylight sensors
(P/N LRF5-) - Sivoia® QS wireless products - Other GRAFIK Eye® QS wireless control units
(P/N QSGRN-)
Accessory Controls: Pico® Wireless Control (QSRNP models)
•ThePico® Wireless Control is battery powered. It can control GRAFIK Eye® QS wireless control units within a 10 m (30 ft) range (20 m/60 ft in open air). It provides the followingfeatures:
- Control of one or more zones on the GRAFIK Eye® QS Wirelesscontrolunit:turnszone(s)onoroff,raises/lowers zone(s), allows programmable light levels for each button, and goes to user-programmable preset level
- Control of one or more scenes on the GRAFIK Eye® QSWirelesscontrolunit:thePico® wireless control can access any three sequential scenes (1 through 16), or any two sequential scenes and Off; and can raise and lower lighting levels.
Note:“Unaffected”isnotavalidlevelforPico® zone programming.
Accessory Controls: QS Sensor Module (QSM5)•TheQSSensorModuleprovidesameanstolinkwired
or wireless occupancy sensors or daylight sensors, Pico® controls, and wired infrared sensors to a GRAFIK Eye® QS control unit via the wired QS link.
- Occupancy sensors wired (or wirelessly linked) to a QS Sensor Module can be used by one or more GRAFIK Eye® QS control units on the wired link.
- Daylight sensors wired (or wirelessly linked) to a QS Sensor Module can be used by one or more GRAFIK Eye® QS control units on the wired link.
- Pico® wireless controls can control either one or more zones or scenes on the GRAFIK Eye® QS control unit.
- Pico® wired controls can be used, when connected to a QS Sensor Module, to control one or more zones or scenes on the GRAFIK Eye® QS control unit.
- Infrared sensors can control either one or more zones or scenes on the GRAFIK Eye® QS control unit. Functionality varies; refer to the documentation for the QS Sensor Module for details.
Accessory Controls: Contact Closure Input/Output Interface (QSE-IO)
•Recallspresetlightlevelsforthefollowingsetofscenesonthe GRAFIK Eye®QScontrolunit: Scenes 1-4 and Off Scenes 9-12 and Off Scenes 5-8 and Off Scenes 13-16 and Off
•Sequencescenes5-16,Enable/DisableZoneLockout,Enable/Disable Scene Lockout, Enable/Disable Panic Mode, Enable/Disable Timeclock.
•OccupancySensors.Anindividualinputcountsas1occupancy sensor for the GRAFIK Eye® QS control unit. EachinputcanbeassignedtoeitherSceneControlorZoneControl (please refer to the Occupancy Sensor(s) section of this guide).
• ZoneToggle.Allowsaninputtotoggleoneormorezonesbetween programmable preset level(s) and off.
•ShadeOutputmode.AShadeColumnontheGRAFIKEye® QS control unit can be linked to control outputs 1-3 and/or outputs 4-5 on the QSE-IO.
• Forafulllistoffeatures,refertotheQSE-IOSpecificationSubmittal.
Specifications
Preset Dimming Controls
369420c 7 07.16.12
®
Job Name:
Job Number:
Model Numbers:
PageSPecification Submittal
Wireless Control Unit (230 V 865 MHz)
Accessory Controls: DMX Output Interface (QSE-CI-DMX)
•AnyzoneontheGRAFIKEye® QS control unit can be mappedtoanysingleDMX512Channel.
•AnyzoneontheGRAFIKEye® QS control unit can be simultaneouslymappedtoanythreeDMX512channels(providingRGB/CMYcontrol).
•DMXloadscannotbeusedwithdaylighting.
Accessory Controls: Ethernet and RS232 Interface (QSE-CI-NWK-E)
•Allowsformonitoringandcontroloftheoutputsandlocalscenes of the GRAFIK Eye® QS control unit.
Other Accessory Controls and Devices•EnergiSavrNodeTM QS (ESN). Refer to the Specification
Submittal for details.
Occupancy Sensor(s)•TheGRAFIKEye® QS control unit works with occupancy sensorsthrougheither:
-SceneControl:Uptofoursensorsactivateuser-selectable occupancy and vacancy scenes.
-ZoneControl:uptofoursensorsperzoneactivateuser-selected occupancy and vacancy zone levels.
•Occupancysensorsmayinclude: - Contact closure sensors wired to CCI input on back of
GRAFIK Eye® QS control unit - Wireless Radio Powr SavrTM occupancy or vacancy
sensors (model numbers starting with LRF5) - Wired or wireless sensors connected QS Sensor Module
(QSM5)• Ifanysensorinagroupdetectsoccupancy,thenthe
GRAFIK Eye® QS control unit will go to the designated occupancy scene or zone level.
• Ifallsensorsinagroupdetectvacancy,thentheGRAFIKEye® QS control unit will go to the designated vacancy scene or zone level.
•Lowbattery:theDiagnosticsscreenwilldisplayalowbattery symbol when applicable.
• IftheGRAFIKEye® QS control unit does not receive a signal from an occupancy sensor on the link (usually due to a dead battery), the lights associated with that sensor will go to the occupied level.
Daylight Sensor(s)•TheGRAFIKEye® QS control unit allows daylight sensors
to control one or more lighting zones to adjust electric light levels based on measured daylight levels.
•Daylightsensorsmayinclude: - Wireless Radio Powr SavrTM units (model numbers starting
with LRF5) - Wired or wireless sensors connected to a QS sensor
module (QSM5)•AdaylightsensorcancontroloneormoreGRAFIKEye® QS controlunitzones:
- Each zone can be calibrated to target light levels - A zone can be controlled by no more than one daylight
sensor•Daylightcontrolcanbeenabledordisabledonascene-by-scenebasis:
-Bydefault,daylightcontrolisenabledinallscenes
Note: Daylight control through the GRAFIK Eye® QS control unit only affects select lighting loads. Shade groups cannot be controlled by daylight sensors. Daylighting does not affectDMXorRGB/CMYDMXloads. DaylightingofRemoteZoneslinkedtoEnergiSavrNodeTM zones must be configured at the Energi Savr NodeTM unit or through the iPod.
Specifications
Preset Dimming Controls
369420c 8 07.16.12
®
Job Name:
Job Number:
Model Numbers:
PageSPecification Submittal
Wireless Control Unit (230 V 865 MHz)
SpecificationsContact Closure Input (CCI) with Power Supply Output
•EachGRAFIKEye® QS control unit has one contact closure input (Terminal A).
- The attached device must provide a dry contact closure or solid-state output.
- Input is miswire-protected up to 36 V .•Thecontactclosureiscapableofacceptingthefollowingtypesofinputs:
-Maintained(default):TheGRAFIKEye® QS control unit will act on both a contact closure and a contact open/release event.
-Momentary:TheGRAFIKEye® QS control unit will act on only contact closure events.
•EachGRAFIKEye® QS control unit can supply 50 mA maximum at 24 V .
- Useful for powering occupancy sensors. - An auxiliary power supply must be used if the device
requires more than 50 mA.•TheCCIiscapableofoperatinginthefollowingmodes -Occupancy:Ifanoccupancysensoriswireddirectlyto
the GRAFIK Eye® QS control unit. -Emergency:ThissettingallowstheGRAFIKEye® QS
control unit to work with a LUT-ELI. When an emergency situation is detected, all lights will go to full on, and no operations will be allowed until the emergency signal is cleared.
-Afterhours:AllowstheCCItostartandendtheafterhoursmode.
-Timeclock:AllowstheCCItoenableanddisablethetimeclock.
-SceneLockout:Preventstheuserfrommakinganychanges to the control unit. The current scene will stay on until the CCI enables normal operation.
-SaveNever:Preventsanychangesfrombeingsavedwhile the CCI is being used.
-DisableCCI:TheCCIwillhavenoeffectonthesystemand will not appear on the list of available sensors.
Security Lockout Password•A4-characterpassword(usingcharactersAtoZand
0 to 9) can be enabled/disabled to lock out access to the Programming Menu.
•BydefaultthereisnopasswordenabledontheGRAFIKEye® QS control unit.
• Incasethe4-digitpasswordisforgotten,contactLutronTechnical Support to regain access.
Remote Zone Mapping•MapaGRAFIKEye® QS zone directly to an Energi Savr
NodeTM output so that programmed scenes in the GRAFIK Eye® QS control unit will directly control the output levels of the Energi Savr NodeTM.
•Adjusthigh-endandlow-endtrimforremotezonesthrough the Energi Savr NodeTM or Energi Savr app software.
•ChangeloadtypesofremotezonesthroughtheEnergiSavr NodeTM or Energi Savr app software.
•ConfiguredaylightingforremotezonesthroughtheEnergiSavr NodeTM or Energi Savr app software.
•Required: - GRAFIK Eye® QS control unit with firmware version
7.000 or higher - Energi Savr NodeTM unit with firmware version 6.000 or
higher - Energi Savr app version 6.0.0 or higher (required only if
the Energi Savr NodeTM unit has been configured using the app)
Partitioning•Whenpartitionisopen,creatingonelargespace,
automatically combines lighting preset functions for multiple GRAFIK Eye® QS control units.
•Whenpartitionisclosed,creatingtwoormoresmallerspaces, lighting preset functions become independent.
•RequiresoneQSWS2-2Bwallstation,aGRX-IRPSinfraredtransmitter/receiverpair,andaGRX-12VDCpower supply for operation.
• Ifoccupancysensorsarerequiredinapartitionedspace,notethateachroom’soccupancysensor(s)willoperateindependent of the partition status.
iPod is a trademark of Apple Inc. registered in the U.S. and other countries.
Preset Dimming Controls
369420c 9 07.16.12
®
Job Name:
Job Number:
Model Numbers:
PageSPecification Submittal
Wireless Control Unit (230 V 865 MHz)
Specifications
System Limits•TheQSwiredcommunicationlinkislimitedto100devices(wiredorwireless)or100zones.
CapacitiesZones Unit Zone Capacity Capacity (watts) (watts) 6 2 300 500
Load Type Notes •ForapplicationswithELVloadsorloadwattagesexceedingthespecifiedcapacities,pleaserefertospecificationsforLutronpowermodulesorinterfaces(NGRX-PB-AU;NGRX-ELVI-AU;NGRX-FDBI-AU).
•Notallloadsmustbeconnected;however,connectedzonesmusthaveaminimumloadof40W.•Maximumtotallightingloadforamagneticlow-voltagezoneis500VA/400W.•Nozonemaybeloadedwithmorethan500W.•Forcontrollinglow-wattageloads(CFL,LED)inanon-dimapplication,contactLutronTechnicalSupportforthe
appropriate solution.
Preset Dimming Controls
369420c 10 07.16.12
®
Job Name:
Job Number:
Model Numbers:
PageSPecification Submittal
Wireless Control Unit (230 V 865 MHz)
GRAFIK Eye® QS Wireless Custom Color Options and Model Numbers You must order a Base Unit and a Faceplate KitSee Standard Color Combinations page for faceplate, stripe, and button colors
QSGFP - - Face-plate Prefix
Color/ Finish
Number of Window Treatment
Columns
Omit = none 1 = 1 column 2 = 2 columns 3 = 3 columns
Architectural Matte FinishesStandard (ship in 48 hours)White WHIvory IVBeige BEGray GRBrown BRBlack BLAlmond ALLight Almond LA
Architectural Metal FinishesBrightBrass BBBrightChrome BCBrightNickel BNSatinBrass SBSatin Chrome SCSatin Nickel SNAntiqueBrass QBAntiqueBronze QZ
Anodized Aluminum FinishesClear CLABlack BLABrass BRA
Satin Color Matte FinishesSnow SWBiscuit BIEggshell ESTaupe TPMidnight MNLimestone LSStone STDesert Stone DSTerracotta TCHot HTGoldstone GSPalladium PDPlum PLTurquoise TQBluestone BGSea Glass SGGreenbriar GBSienna SIMerlot MRMocha Stone MS
Top Door Color
Faceplate Kit (includes coordinating stripe and buttons; see Standard Color Combinations page)
Faceplate Custom Color/Finish Codes
Keypad Engraving
Code
Keypad Engraving Codes
Omit = Unengraved Ships with engraving certificate that customer can redeem at no charge
SGN = Symbol-based Engraving
NST = Non-Standard Text Engraving Please visit the GRAFIK Eye® QS website at www.lutron.com/grafikeyeqs for custom engraving forms. Submit completed form with order, and unit will ship engraved as specified by customer.
Omit = same as unit
T = Translucent
Base Unit
QSGRN - 6 PCEPrefix
6Zones
Phase Control Triac-CE
OK
1 2 3 4 5 69 10 11 12 13 14 7 815 16
9-161-8 OK
1 2 3 4 5 69 10 11 12 13 14 7 815 16
9-161-8
Lighting keypad
Window treatment column
Example:QSGRN -6PCE6-zone base unit andQSGFP-2IV-SGNIvory faceplate kit with two window treatment columns and symbol-based engraving
1
2
3
4
Preset Dimming Controls
369420c 11 07.16.12
®
Job Name:
Job Number:
Model Numbers:
PageSPecification Submittal
Wireless Control Unit (230 V 865 MHz)
QSGB - 5B - WH - CustomButton
Kit PrefixKeypad
Engraving Code
ButtonConfiguration
3BRL=3-buttonwithraise/lower (window treatment column)
5B=5-button (lighting keypad)
ButtonColor/ Finish
GRAFIK Eye® QS Wireless Custom Options and Model Numbers See previous pages for Standard and Other Custom Model NumbersSee Standard Color Combinations page for faceplate, stripe, and button colors
Custom Button Kit
Button Kit Custom Color/Finish CodesArchitectural Matte FinishesWhite WHIvory IVBeige BEGray GRBrown BRBlack BLAlmond ALLight Almond LA
Satin Color Matte FinishesSnow SWBiscuit BIEggshell ESTaupe TP
Custom Stripe Kit
QSGS - WHStripe
Kit Prefix
Stripe Color/Finish
Stripe Custom Color/Finish CodesSame as Faceplate colors on previous page
Keypad Engraving Codes
Omit = Unengraved Ships with engraving certificate that customer can redeem at no charge
SGN = Symbol-based Engraving
NST = Non-Standard Text Engraving Please visit the GRAFIK Eye® QS website at www.lutron.com/grafikeyeqs for custom engraving forms. Submit completed form with order, and unit will ship engraved as specified by customer.
OK
1 2 3 4 5 69 10 11 12 13 14 7 815 16
9-161-8 OK
1 2 3 4 5 69 10 11 12 13 14 7 815 16
9-161-8
Lighting keypad
Window treatment column
1
2
3
4
Preset Dimming Controls
369420c 12 07.16.12
®
Job Name:
Job Number:
Model Numbers:
PageSPecification Submittal
Wireless Control Unit (230 V 865 MHz)
Wiring Diagrams
12
34
12
AB
C
123456LN
Load wiring
Communication link
Occupancy sensor/contact closure input and 24 V power
IR input
Terminations
Preset Dimming Controls
369420c 13 07.16.12
®
Job Name:
Job Number:
Model Numbers:
PageSPecification Submittal
Wireless Control Unit (230 V 865 MHz)
Power Group Wiring Example
LUTRON
On the QS link, there are devices that supply power and devices that consume power. Each device has a specific number of Power Draw Units (PDUs) it either supplies or consumes. A Power Group consists of one device that supplies power and one or more devices that consume power; each Power Group may have only one power-supplying device. Refer to the QS Link Power Draw Units specification submittal (Lutron P/N 369405) for more information concerning PDUs. Within Power Groups on the QS link, connect all 4 terminals (1, 2, 3, and 4), shown by the letter A in the diagram. BetweendevicesontheQSlinkthatsupplypower,connectonlyterminals1,3,and4(NOTterminal2),shownbytheletterBonthediagram.Refertothespecificdevicedocumentationforwiringdetails.Wiring can be T-tapped or daisy-chained.
Power Group 1
Power Group 2
Power Group 3
A
A
A
B
B(Do not connect
terminal 2: 24 V )
(Do not connect terminal 2: 24 V )
GRAFIK Eye® QScontrol unit Supplies PDUs
QS Power SupplySupplies PDUs
Energi Savr NodeTM unit Supplies PDUs
Control Interfaces Consume PDUs
Control Interfaces Consume PDUs
Wallstations Consume PDUs
Wallstations Consume PDUs
Wallstations Consume PDUs
QS Sensor Module with Occupancy SensorConsumes PDUsB
(Do not connect terminal 2: 24 V )
Quantum® processor Supplies PDUs
Wireless Occupancy Sensordoes not consume PDUs
Connect all 4 terminals within a power group:
1: Common 2: 24 V 3 and 4: Data
Connect only 3 terminals between power groups:
1: Common 3 and 4: Data
Do not connect Terminal 2: 24 V
A
B
Preset Dimming Controls
369420c 14 07.16.12
®
Job Name:
Job Number:
Model Numbers:
PageSPecification Submittal
Wireless Control Unit (230 V 865 MHz)
Mounting
Line Voltage Wiring
Fits into a 4-gang U.S. backbox, 90.4 mm (3.5 in) deep (Lutron P/N 245-254) or 76.2 mm (3 in) deep (Lutron P/N 241-400)
12
34
12
AB
C
1 2 3 4 5 6 L N
Distribution Panel230 V 50/60 Hz
12
34
12
AB
C
1 2 3 4 5 6 L N
To Load 1
To Load 2
To Load 3
To Load 4
To Load 5
To Load 6
Rear of QS control unit
•Pullpowerwiringfromdistributionpanelandtolightfixtures.•Eachlinevoltageterminalcanacceptone4.0mm2 (12 AWG) wire.•ConsultLutronfornon-dimrelaywiringand/orloadsideemergencytransferwiring.
Mounting screws (4)
GRAFIK Eye® QS control unit
Hinged bottom lid
Hinged top lid
Line voltage (hot/live) is labeled L.
Preset Dimming Controls
369420c 15 07.16.12
®
Job Name:
Job Number:
Model Numbers:
PageSPecification Submittal
Wireless Control Unit (230 V 865 MHz)
IEC PELV/NEC® Class 2 QS System Wiring•Wiringcanbedaisy-chainedorT-tapped.•Wiringmustberunseparatelyfromline/mainsvoltage.•Totallengthofcontrollinkmustnotexceed610m(2000ft).
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON LUTRON
LUTRON
GRAFIK Eye® QS Control Unit Sivoia® QS
window treatment
seeTouch® QS wallstations
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON LUTRON
LUTRON
Daisy-Chain Wiring Example
T-Tap Wiring Example
GRAFIK Eye® QS Control Unit
Sivoia® QS window
treatment
Sivoia® QS smart panel
Sivoia® QS smart panel
seeTouch® QS wallstations
Wire Sizes (check compatibility in your area)
QS Link Wiring Length Wire Gauge Lutron Cable Part Number
Less than 153 m Power (terminals 1 and 2)1 pair 1,0 mm2 GRX-CBL-346S(non-plenum)
GRX-PCBL-346S(plenum)Data (terminals 3 and 4)1 twisted, shielded pair 0,5 mm2
153 to 610 m Power (terminals 1 and 2)1 pair 4,0 mm2 GRX-CBL-46L(non-plenum)
GRX-PCBL-46L(plenum)Data (terminals 3 and 4)1 twisted, shielded pair 0,5 mm2
Preset Dimming Controls
369420c 16 06.26.12
®
Job Name:
Job Number:
Model Numbers:
PageSPecification Submittal
Wireless Control Unit (230 V 865 MHz)
IEC PELV/NEC® Class 2 QS System Wiring•Wiringcanbedaisy-chainedorT-tapped.•Wiringmustberunseparatelyfromline/mainsvoltage.•Totallengthofcontrollinkmustnotexceed610m(2000ft).
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON LUTRON
LUTRON
GRafiK eye® QS control unit Sivoia® QS
window treatment
seetouch® QS wallstations
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON LUTRON
LUTRON
Daisy-Chain Wiring Example
T-Tap Wiring Example
GRafiK eye® QS control unit
Sivoia® QS window
treatment
Sivoia® QS smart panel
Sivoia® QS smart panel
seetouch® QS wallstations
Wire Sizes (check compatibility in your area)
QS Link Wiring Length Wire Gauge Lutron Cable Part Number
less than 153 m Power (terminals 1 and 2)1 pair 1,0 mm2 GRX-CBL-346S(non-plenum)
GRX-PCBL-346S(plenum)Data (terminals 3 and 4)1 twisted, shielded pair 0,5 mm2
153 to 610 m Power (terminals 1 and 2)1 pair 4,0 mm2 GRX-CBL-46L(non-plenum)
GRX-PCBL-46L(plenum)Data (terminals 3 and 4)1 twisted, shielded pair 0,5 mm2