Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
GRAFIK Eye QS Control Unit
LUTRON
1
2
3
4
Off
Preset
Close
Open
DescriptionGRAFIK Eye QS is the premier energy-saving light and shade control. GRAFIK Eye QS includes an astronomic timeclock, intuitive lighting presets, and direct shade control. Additionally, the GRAFIK Eye QS is compatible with all Lutron wired QS products and systems, including Quantum.
Mechanical Dimensions
4$ in (119 mm)
94 in (239 mm) 4 in
(10 mm) 2 in (51 mm)
Front View Side View
Fits into a 4-gang U.S. backbox, 3` in (89 mm) deep; Lutron P/N 241-400.
System Topology
LUTRONLUTRON
LUTRON LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON
LUTRON
LUTRONLUTRON
LUTRON LUTRON
LUTRON
LUTRON LUTRON
LUTRON
LUTRON
LUTRON
Example of Wired System
QSE-CI-NWK-E
Sivoia QS shade
seeTouch QS
seeTouch QS
Wired occupancy
sensor
GRAFIK Eye QS GRAFIK Eye QS
Wired QS link
Quantum (optional)
QS Sensor Module
Energi Savr NodeTM
Preset Dimming Controls
369430 Rev. A 1 04.25.11
100 V Control Unit
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
FeaturesPushbuttonrecalloffourpresetlightingscenes,plusOff.
Twelve(12)additionalscenesaccessiblethrough other QS devices, such as seeTouch QS wallstations.
Optionalintegratedshadecontrolbuttons,whichcanalsobeaddedtotheunitafterinstallation.
Masteroverridebuttonstoraiseandloweralllights.
Allowssetupoflightingscenesandshadepresets using buttons on the control unit.
Built-ininfrared(IR)receiver.ExternalIRconnection.Built-inastronomictimeclock. Infoscreenshowszonelightlevelpercentage,energysavings,zonelabeling,andprogramming.
Lockoutoptionpreventsaccidentalchanges.Oneoccupancysensorinputand24V powerforoccupancysensor.
QScommunicationlinkforseamlessintegrationoflights,motorizedwindowtreatments, occupancy sensors, wallstations, andintegrationinterfaces.
CompatiblewithallLutronQSsystemcomponents.
Backlitbuttonswithengravingmakeuniteasyto locate and operate.
Availableinavarietyofcolorsandfinishes.
LUTRON
OK
1 2 3 4 5 6
Optional shade control keypad
Zone control
Infraredreceiver
USB type mini B
Infoscreen
Lighting control keypad
1
2
3
4
Off
Off
Preset
Close
1
2
3
4
Open
Preset
Close
Open
Note: General Engraving (-EGN) shown.
Preset Dimming Controls
369430 Rev. A 2 04.25.11
100 V Control Unit
Model Numbers:
PageSPECIFICATION SUBMITTAL
Job Name:
Job Number:
Key Design FeaturesLightningstrikeprotectionmeetsANSI/IEEEstandard62.41-1980.Canwithstandvoltagesurgesofupto 6000 V andcurrentsurgesofupto3000A.
Testedtowithstand16kVelectrostaticdischargewithout damage or memory loss.
RTISSTM-equipped:Compensatesinrealtimeforincominglinevoltagevariations(novisibleflickerwith+/-2%changeinRMSvoltagepercycle,and+/-2%Hzchangeinfrequencypersecond).
Powerfailurememoryretainsprogrammingandlightlevelsettingsforupto10yearsintheeventofapowerloss.
TheGRAFIKEye QS supplies 3 Power Draw Units (PDUs) on the QS link. Forcompleteinformation,seePowerDrawUnitsonthe QS Link, Lutron PN 369405.
Faceplateishingedatthetopandbottom,andstaysopenat180foreaseofaccess.
Scene and Shade ButtonsLarge,roundedbuttonsareeasytouse.Backlitbuttonswithoptionalengravingmakeiteasytofindandtooperatethecontrolunitinlowlightconditions (backlight can be disabled).
Optionalbuttonengravingisangleduptotheeyeforeasy reading.
Predefinedlabelstickersareincludedforfieldlabeling.4presetlightingscenes,plusOff,areaccessiblefromthefrontofthecontrolunit.
12additionalscenesarestoredinthecontrolunitandareaccessiblefromseeTouch QS wallstations and QSinterfaces.
Lightlevelsfadesmoothlybetweenscenes.Fadetimecanbesetdifferentlyforeachscene:0to59seconds,or1to60minutes.MaximumfadetimefromOffis 3 seconds.
Input Power100V 50/60Hz
Environment32to104F(0to40C).Relativehumiditylessthan90%non-condensing.
Lighting Sources/Load TypesControlsthefollowinglightingsourceswithasmooth,continuoussquarelawdimmingcurveoronafullconduction non-dim basis:
IncandescentHalogenMagneticlow-voltagetransformerNeonandcoldcathodeNon-dim(incandescent,magneticlow-voltage,
or neon/cold cathode) PleaserefertoCapacitiesformoreinformation.
Controlsthefollowinglightingsourceswithasmooth,continuoussquarelawdimmingcurveoronafullconduction non-dim basis through separate Lutron power interfaces:
Electroniclow-voltagetransformerNon-dim0-10V
Capacities
100 V 50 / 60 Hz
Unit Capacity (watts) 1600
MLV 1600 VA / 1200 W
Zone Capacity (watts) 25 600
MLV 25 600 VA / 25 480 W
Load Type NotesAllelectroniclow-voltage(ELV)lightingusedwithaninterfacemustberatedforreversephasecontroldimming.BeforeinstallinganELVlightsource,verifywiththemanufacturerthattheirtransformercanbedimmed.Whendimming,anELVinterface(suchasthePHPM-PA-DV-WH) must be used with the control unit.
Notallzonesmustbeconnected;however,connectedzonesmusthaveaminimumloadasspecifiedabove.
Nozonemaybeloadedwithmorethanthecapacityspecifiedabove.Forhigherwattageapplications,useLutron power module PHPM-PA-JA or PHPM-SW-JA.
System LimitsTheQSwiredcommunicationlinkislimitedto100devicesor100zones.
Specifications
Preset Dimming Controls
369430 Rev. A 3 04.25.11
100 V Control Unit
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
Astronomic Timeclock Integraltoallunits.7dailyschedulesavailable.Oneavailableholidayscheduleisprogrammableby
date up to one year in advance.25eventsperdaymaximum.TimeclockeventsareprogrammabletocontrolscenesthataffectanyEnergiSavrNodeTM unit connected on the QS link without changing the local scene on the GRAFIK Eye QS.
Astronomictimesareprogrammablebyintegralcitydatabase or by entering latitude and longitude. Times automatically adjust throughout the year based on location.
Localtimeclockeventscanactivateanyofthefollowingfeatures:
-Scenes1to16andOff - Any available shade presets -StartandEndafterhoursmode -EnableandDisabledaylightingforallzones/groups -EnableandDisableoccupancyforoccupancy/
vacancy sensors -EnableandDisableoccupiedeventsforalloccupancy
sensors
System Communications and CapacitiesLow-voltagetypeIECPELV/NEC Class 2 wiring connectscontrolunits,wallstations,motorizedshades,andcontrolinterfaces.
AQSsystemcanhaveupto100devicesand100zones.
Infrared Infrared(IR)receiverallowsinfraredtransmitterstoselect8scenes,raise/lowerlightingzones,orraise/lower shades.
Transmitterbuttonsimitatebuttonsonfaceplate.50ft(15m)lineofsightrange.TerminalblockinfraredinputforconnectiontoawiredIRinputfromthird-partyequipment.
IRcanbedisabledviaprogramming.WorkswithLutronGRX-ITandGRX-8ITinfraredremote
controls.
Shade ControlTheGRAFIKEye QS can include up to 3 shade button
columns. Each column has backlit open, preset, close, and raise/lower buttons.
Eachshadebuttoncolumncanbeprogrammedtooperateoneshadeoragroupofshades.(Shadesmaybe assigned to more than one shade button column).
Faceplatesareavailablewith1,2and3shadebuttoncolumns.
Zone ControlEachzonehasadedicatedraiseandlowerbuttontoadjustthezone.
Eachzonehasadedicated7LEDbargraphforlevelstatus.Percentageoflightlevelandenergysavedisdisplayedontheinfoscreen.
AllzoneinformationhasbluebacklitLEDs.Backlightturnsoffwhenidlefor30seconds.
Info ScreenOLED(organicLED)screenisviewablefromallangles.Screenturnsoffwhenidlefor30seconds.Programmablezonelabels.Programmablescenelabels.Statusofreal-timezonepercentageandenergysavings.Programmabletimeclockschedules.Programmableshadelabels.
Specifications
Preset Dimming Controls
369430 Rev. A 4 04.25.11
100 V Control Unit
Job Name:
Job Number:
Model Numbers:
PageSPECIFICATION SUBMITTAL
SpecificationsAccessory Controls: seeTouch QS Wallstations (QSWS2)
WiredseeTouchQSkeypadsprovidethefollowingfeatures:
-Accesstooneormoreofthe16scenesontheGRAFIK Eye QS
-Zonetoggle,partitioning,sequencing,finetune,panicmode, and timeclock enable/disable
- Contact closure inputs -Certainfunctionsareonlyavailableonspecific
wallstationconfigurations.RefertotheseeTouch QS specificationsubmittal.
Accessory Controls: QS Sensor Module (QSMX-4W)TheQSSensorModuleprovidesameanstolinkwired
occupancy and daylight sensors to a GRAFIK Eye QS via the wired QS link.
- Occupancy sensors wired to a QS Sensor Module can be used by one or more GRAFIK Eye QS control units on the wired link.
- Daylight sensors wired to a QS Sensor Module can be used by one or more GRAFIK Eye QS control units on the wired link.
-Infraredsensorscancontroleitheroneormorezonesor scenes on the GRAFIK Eye QS. Functionality varies; refertothedocumentationfortheQSSensorModulefordetails.
Accessory Controls: Contact Closure Input/Output Interface (QSE-IO)
Recallspresetlightlevelsforthefollowingsetofsceneson the GRAFIK Eye QS:Scenes1-4andOff Scenes9-12andOff Scenes5-8andOff Scenes13-16andOff
Sequencescenes5-16,Enable/DisableZoneLockout,Enable/Disable Scene Lockout, Enable/Disable Panic Mode, Enable/Disable Timeclock.
OccupancySensors.Anindividualinputcountsas1occupancysensorfortheGRAFIKEye QS. Each input can be assigned to either Scene Control or Z
