PROJECT: DATE: QUANTITY:
TYPE: NOTE: Specialized Lighting Solutions reserves the right to
change speci�cations without prior notice, please contact factory
for latest
information.
Specialized Lighting Solutions Office:7144 NW Silverado
DriveBeaverton, Oregon 97124
www.slsnw.comTel: 503-530-8908Fax: 503-531-0711
Inground Recessing Box : Marine Grade 316 Stainles Steel. Body :
Extruded Aluminum with UV Protected Marine Grade Powder
coatHardware : Marine Grade 316 Stainles Steel Lens : Tempered
Glass 0.31” Thick (Clear or Frosted)Driver : 120-277V 50-60Hz (
Remote Mount)Gaskets : Injection Molded Ultra High Temperature
SiliconeLED : RGB Watts : 9WCRI : > 85Cable : 16Ft Water Proof
CableApprovals : ETL
Fixed Tilt Option
Technical Data
C- Clear
A range of high quality inground luminaires for use in all
weather conditions without the traditional Stainless Steel
trim.Merely a painted glass trim finishes the look of the
fixture..
This beautiful range of trim less inground fixtures is designed
to deliver the desired light effect to facades , columns, bridges
monuments and trees.The fixtures are manufactured with a
combination of stainless steel 316L and powder coated low copper
content Aluminum.Once placed inside the Stainless steel recessing
box the fixture can only removed by a special suction cup tool,
Provided by SLS.
The fixture is provided with a marine grade 316 Stainless Steel
Recessing Box for easy mounting in concrete.
For wall wash applications the fixture can be ordered with a 7
Deg, or 25 Deg fixed tilt.Vandal Resistant Tempered Glass, High
temperature silicone gaskets and cast resin complete the fixture
and make it IP67 and IK10 to withstand harsh environments.
Not only is the body made of the highest quality low copper
content aluminum but incorpo-rated in the product design is a
unique product feature that uses a water proof potting compound
that totally seals the back of the luminaire and stops water
ingress. This product is designed for use on pathways, landscapes
and open spaces . The fixture is pre wired with a 16 Ft water proof
cable that makes connection to the remote mounted controls a simple
task. Longer power cable can be provided if specified.RGB Controls
are additional options and should be specified with the control
package.Remote mounted driver and RGB control box to be provided by
contractor.See RGB Control cut sheet for driver and control
specification.
IP67 : Suitable for Wet Locations IK10 : Impact Resistant
(Vandal Resistant)Load : 5 kN (Vandal Resistant)
Page 1 of 2
Gordion 2 : Small Inground LED 9W RGB3.2” - 4” Inground Round -
TrimlessStainless Steel 316
STANDARD OPTIONS
9W - RGB
LED Color
LED Watts (Specify) Tilt (Specify)
07- 7 Deg Tilt (Fixed) 0 - No Tilt
RGB 25- 25 Deg Tilt (Fixed)
Lens (Specify)
F- Frosted
Beam Spread (Specify) 10 Deg 25 Deg 40 Deg
3.3”
Ø 3.2”
3.2”
25
4”4”
Ø 4”
Options (Please Specify)
10 Deg - 10 deg Optics
PROJECT: DATE: QUANTITY:
TYPE: NOTE: Specialized Lighting Solutions reserves the right to
change specifications without prior notice, please contact factory
for latest information.
Specialized Lighting Solutions Head Office:7144 NW Progress
CourtHillsboro, Oregon 97124
www.slsnw.comTel: 503-530-8908Fax: 503-531-0711
Ordering Example : Gordion 2 RGB - 170171 - 10 DEG - CLR -
120/277 Beam
Gordion 2 RGB Inground
Volts
9W - RGBLED Watts (Specify)
Volts (Please Specify)
- Other __________ - 120-277
LensCode Other
Page 2 of 2
Gordion 2 - RGB Inground3.2” - 4” Inground Round -
TrimlessMarine Grade Stainless Recessing Box
9W RGBLED Watts (Specify)
Beam (Please Specify)
Style (Specify) 170121 - Round Trim less
3.3”
Ø 3.2”
3.2”
Style (Specify)
170131 - Round Trim less 7 Degree Fixed Tilt
170171 - Round Trim less 25 Degree Fixed Tilt
7 Deg Fixed Tilt
25 Deg Fixed Tilt
3.2 Dia - 7 Deg Fixed Tilt
4 Dia - 25 Deg Fixed Tilt
Style (Specify)
9W RGBLED Watts (Specify)
7
3.2”
25 Deg - 25 deg Optics 40 Deg - 40 deg Optics
CLR - Clear LensLens
FR - Frosted Lens
3.2 Dia
3.2”3.3”
25
4”
4”4”
MJMImage
