GH Johnson (October 14, 2015) Page 1dental.washington.edu/wp-content/media/restorative/GHJohnsonCV-… · GH Johnson (October 14, 2015) Page 2 George Ellsperman Gold Foil Study Club;

GH Johnson (October 14, 2015) Page 1

CURRICULUM VITAE GLEN HOWARD JOHNSON Date of Birth: June 1, 1945 Education University of Washington BSME Mechanical Engineering March 1968 University of Washington M.S.E. Bioengineering Dec 1977 University of Washington D.D.S. Dentistry June 1978 University of Michigan M.S. Dental Materials June 1983 Private Practice Olympia, Washington 1978 ‐ 1986 Seattle, Washington 1986 ‐ 2007 Faculty Appointments Institution Department Rank Years % Time Univ of Washington Prosthodontics Clinical Asst. Prof. 1977‐1980 20% Univ of Washington Restorative Dentistry Lecturer 1980‐1983 50% Univ of Washington Restorative Dentistry Assistant Prof. 1983‐1988 100% Univ of Washington Graduate Faculty Member 1987‐present Univ of Washington Restorative Dentistry Assoc. Prof. 1988‐1994 100% Univ of Washington Restorative Dentistry Professor 1994‐2015 100% Univ of Washington Restorative Dentistry Professor Emeritus 2015‐present Other Employment/Positions Western Electric Company, Production Engineer, Bedford, MA, 1968‐1970 Technical University of Munich, Research Associate, Munich, Germany, 1970‐1973 Private Dental Practice, general dentistry, Olympia, 1978‐1986; Seattle, 1986‐2007 US Army civilian dentist (part‐time), 769th Medical Attachment, US Army Dental Clinic, Augsburg, Germany, 1991‐1992. University of Munich, Research Associate, Div of Dental Prosthetics, Munich, Germany, Sept 1991‐ August 1992; Sept

2000‐ April 2001. Visiting Professor/Fellow, Department of Biomaterials, Faculdade de Medicina Dentaria, Universidade de Lisboa, Cidade

Universitária, Lisbon, Portugal, April‐July 2001. Visiting Professor, Poliklinik für Zahnärztliche Prothetik, Ruprecht‐Karls‐Universität Heidelberg, Heidelberg, Germany, Sep

2008‐August 2009. Memberships and Offices Alumni Association, University of Washington (1968‐present) Dental Alumni Association, University of Washington (1978‐present) American Dental Association (ADA) (1974‐present) Washington State Dental Association (WSDA) (1978‐present) Thurston‐Mason County Dental Society (1978‐1986) Seattle‐King County Dental Society (1986‐present) ADA Annual Session Program Coordinating Comm. 1991 Program and CDE Committee 1993‐present ADA Council on Dental Materials, Instruments, and Equipment elected Council member by ADA House of Delegates (1987‐1991) selected as Chairperson by ADA Board of Trustees (1989‐1991) American Standards Committee MD156, Chairman of Subcommittee on Resilient Denture Liners (1988‐present) International Standards Organization (ISO) Technical Committee 106, USA/ANSI delegate (1988‐present) International Association for Dental Research (IADR) (1982‐present) IADR/AADR, Dental Materials Group member (DMG) (1983‐present) IADR/DMG ad hoc Comm. on Professional Development (1983) IADR/DMG Annual Dinner Chairperson (1993‐1994) American Association for Dental Research (AADR) (1982‐present) AADR, Executive Council of the DMG (1985‐1991) AADR, Regional AADR Organizing Committee, Seattle (1984) AADR, Membership Committee, elected member (1991‐1995) American Association of Dental Schools (AADS) (1983‐present) Society for Biomaterials, member (1983‐1987) Member of Program Committee (1985‐1986)


George Ellsperman Gold Foil Study Club; G. Stibbs, mentor (1983‐1986) Associated Ferrier Study Clubs (1983‐1986) American Academy of Gold Foil Operators (1984‐1992) Academy of Operative Dentistry, member (1984‐present) Scientific Sessions Committee, member (1987‐1988) Research Committee, member (1989‐1991) Pacific Coast Society for Prosthodontics Associate Member (1989‐1993) Active Member (1993‐present) Chair, Scientific Session, 2000 Annual Meeting (1999‐2000) Executive Council, member (2010‐2012)

Secretary‐Treasurer (2012‐2015) Journal of Prosthetic Dentistry, member of the Board of Directors of the Editorial Council (2010‐2016) Dental License State of Washington (license # 5146) (1978‐present) Dental School Honors Honors Prosthodontics (1977‐1978) Roy C. Hill Outstanding Prosthodontics Achievement Award (1977) Mosby Award for service in nursing home dentistry program (1978) Seattle Pedodontics Society David Law Award (1978) TEAM Management Award (1978) First Place, U. of Michigan, School of Dentistry Table Clinics (1982) Outstanding Instructor Award from the Class of 1984 (1981) Outstanding Instructor Award from the Class of 1987 (1984) Outstanding Instructor Award from the Class of 1988 (1985) Outstanding Instructor Award from the Class of 1989 (1986) Outstanding Instructor Award from the Class of 1989 (1988) Outstanding Instructor Award from the Class of 1991 (1988) Univ. of Washington Distinguished Teaching Award Nominee (1995) Investiture of Hoods Ceremony Recognition ‐ Class of 1996 (1996) Investiture of Hoods Ceremony Recognition ‐ Class of 1997 (1997) Outstanding Instructor Award from the Class of 2002 (1999) Investiture of Hoods Ceremony Recognition ‐ Class of 2000 (2000) Investiture of Hoods Ceremony Recognition ‐ Class of 2004 (2004) Investiture of Hoods Ceremony Recognition ‐ Class of 2007 (2007) Investiture of Hoods Ceremony Recognition ‐ Class of 2011 (2011) Investiture of Hoods Ceremony ‐ Marshall ‐ Class of 2012 (2012) Investiture of Hoods Ceremony Recognition ‐ Class of 2013 (2013) Bruce C. Rothwell Distinguished Teaching Award (2013) Investiture of Hoods Ceremony Recognition ‐ Class of 2014 (2014) Investiture of Hoods Ceremony Recognition – Reader; Class of 2015 (2015) Professional Honors and Awards Summer Research Fellowship (SURF), UW School of Dentistry (1977) National Institute for Dental Research Trainee Fellowship, Dental Materials, University of Michigan (1981‐1983) Omicron Kappa Upsilon Dental Honor Society (1990‐present) Pierre Fauchard Academy, Fellow (1993) Washington State Dental Association Faculty Award (2011) Professional Reviewer/Consultant 1. ADA Council on Dental Materials, Instruments and Equipment, Consultant 1991‐1994 2. Journal of the American Dental Association, Reviewer 1991‐2006 3. Journal of Prosthetic Dentistry, Biomaterials Consultant 1992‐2003 4. Operative Dentistry, Editorial Advisor 1992‐2000 5. Dental Materials, Reviewer 1992‐2000 6. ADA Council on Scientific Affairs, Consultant 1995‐present


Research Supervision 1. M. Ryan, Junior Dental Student, 1983 Summer Research Fellowship (SURF), University of Michigan School of

Dentistry. 2. J. Bunch, Graduate Student, Prosthodontics, University of Washington; Thesis Advisor, 1984‐85. 3. T. Ponti, Dental Student, School of Dentistry, University of Washington; Preceptor for Summer Research Fellow

(SURF), 1986 and 1987. Runner‐up award in scientific paper competition in 1986 and 1987. 4. C. Svoboda, predental student, University of Washington; Faculty sponsor for independent field work in dentistry,

1986. 5. J. Duffin, Dental Student, School of Dentistry, University of Washington; guidance for Summer Research Fellow

(SURF), 1988. 6. K. Chellis, Dental Student, School of Dentistry, University of Washington; preceptor for Summer Research Fellow

(SURF), 1989. 7. D. Falcone, Dental Student, School of Dentistry, University of Washington, guidance for Summer Research Fellow

(SURF), 1989. 8. M. Yashar, Dental Student, School of Dentistry, University of Washington, guidance for Summer Research Fellow

(SURF), 1991. 9. T. Ponti, Prosthodontics Graduate Student, University of Washington, Restorative Dentistry/Prosthodontics, member

of Thesis Committee (1994‐1996). 10. J. Serrano, Prosthodontics Graduate Student, University of Washington, Restorative Dentistry/Prosthodontics,

member of MSD Research Committee for work on “An Accuracy Evaluation of Three Removable Die Systems” (1996‐1997).

11. Eric Leclercq, Prosthodontics Graduate Student, University of Washington, Restorative Dentistry/Prosthodontics, member of MSD Thesis Committee for project entitled “Loss of retention of three plastic resilient attachments for Implant‐retained mandibular overdentures during functional fatigue cycling” (1997‐1998).

12. J. Ceyhan, Prosthodontics Graduate Student, University of Washington, Restorative Dentistry/Graduate Prosthodontics, Chair of the MSD Research Committee for work on “A laboratory and clinical evaluation investigating the dimensional accuracy of a working die generated from two dual‐arch trays and a full‐arch custom tray.” (2001‐2002).

13. Yingying Guo, Public Health and Community Medicine, Doctoral Committee, Graduate School Representative, (2002‐2003).

14. Chandur Wadhwani, Graduate Student, University of Washington, Restorative Dentistry/Graduate Prosthodontics, Chair and Preceptor of the MSD Research Committee for work on “Accuracy of a Newly Formulated Fast Setting Elastomeric Impression Materials” (Nov 2004).

15. Rosario Palacios, Graduate Student, University of Washington, Restorative Dentistry/Graduate Prosthodontics, Chair and Preceptor of the MSD Research Committee for work on “Retention of Zirconium‐oxide Ceramic Crowns for Three Types of Cement.” (2004‐2005).

16. Joshua Erickson, Graduate Orthodontics Student, Member of the Graduate Research Committee for the study of "The Effects of Treatment Using the Damon Bracket System Versus Traditional Treatment Methods". (2004‐5) Defense, November 2005. Thesis submitted to Graduate School December 2005.

17. Kang, Alex, Graduate Student, University of Washington, Restorative Dentistry/Graduate Prosthodontics, Chair and Preceptor of the MSD Research Committee for work on “Accuracy of High Viscosity VPS Impression Materials Using Dual‐arch Trays.” (2005‐2007).

18. Emerson, Jennifer, Student, University of Washington, Restorative Dentistry/Graduate Prosthodontics, Chair and Preceptor of the MSD Research Committee for work on “Retention of Cast Crowns for New Paste‐Paste, Self‐Adhesive Cements.” (2007‐2009).

Grants Funded 1. G. Johnson (PI) and D. Bales, Biomedical Research Support Grant (BRSG): "A Clinical Evaluation of Two New Dental

Amalgam Alloys," Period: June 1, 1984 ‐ May 31, 1985, Funds for instruments and minor equipment for the Restorative Clinical Research Center. NIH/NIDR Grant #RR‐05346, $7043

2. G. Johnson (PI), D. Bales, and L.V. Powell, Sponsored Research Grant from Youdelis Associates, Windsor, Ontario: "Clinical Evaluation of Two New Dental Amalgam Alloys." Period: Mar. 1, 1984 ‐ Mar. 31, 1988. Grant #65‐4443, $12,920

3. G. Johnson (PI) and D. Bales, Biomedical Research Support Grant (BRSG): "Clinical Evaluation of Two New Dental Amalgam Alloys." Period: February 1, 1985 ‐ January 31, 1986. Funds for staff support in establishing a Restorative Clinical Research Center. NIH/NIDR Grant #RR‐05346, $1780

4. D. Bales (PI) and G. Johnson, Sponsored Research Grant from Caulk/Dentsply, Inc., Milford, DE: "A Clinical Study of a New Light Cured Pulp Capping Agent." Period: March 1, 1985 ‐ December 1, 1986. Grant #65‐4700, $12,420

5. G. Johnson (PI) and D. Drennon, Sponsored Research Grant from Coltene, Inc., Altstaetten, Switzerland: "A Clinical Evaluation of a Newly Formulated Addition Silicone Impression Material." Period: June 1, 1985 ‐ January 1, 1987. Grant #65‐4774, $2668


6. G. Johnson (PI), D. Bales, and G.E. Gordon, Sponsored Research Grant from BISCO, Inc., Lombard, IL: "A Clinical Evaluation of a Composite Resin for Class I and Class II Dental Restorations." Period: July 1, 1985 ‐ December 31, 1990. Grant #65‐4773, $28,556

7. J. Weaver (PI), G. Johnson, and D. Bales, Biomedical Research Support Grant (BRSG): "An Evaluation of Marginal Adaptation of Castable Ceramic Crowns." Period: January 1, 1986 ‐ March 31, 1987. NIH/NIDR Grant #RR‐05346, $7223

8. J. Stoddard (PI) and G. Johnson, Biomedical Research Support Grant (BRSG): "An Evaluation of Polishing Procedures for Composite Resins." Period: February 1, 1986 ‐ March 31, 1987. NIH/NIDR Grant #RR‐05346, $5044

9. G. Johnson (PI) and T. Taylor, Sponsored Research Grant from E.R. Squibb and Sons, Princeton, NJ: "Clinical Evaluation of a Nystatin Pastille for Treatment of Denture Stomatitis." Period: June 1, 1986 ‐ June 30, 1989. Grant #65‐5109, $30,000

10. T. Ponti and G. Johnson (Preceptor), Summer Research Fellowship (SURF): "Creep Compliance Behavior of Temporary Soft Denture Liners," 1986. NIH/NIDR Short‐Term Training Grant #DE‐07150, $2638

11. L.V. Powell (PI), G. Johnson, and D. Bales, Biomedical Research Support Grant (BRSG): "Effect of Admixed Indium on Mercury Vapor Release from Amalgam Alloys." Period: October 1, 1986 ‐ March 31, 1987. NIH/NIDR Grant #RR‐05346, $6952

12. Sonuparlak, B.G (PI), Bales, D.J., Johnson, G.H., and Nicholls, J.I., "Ultra High Strength Dental Ceramics." Period: October 1, 1986 ‐ September 30, 1987. NIH/NIDR Grant DE07953‐01, $28,296

13. T. Ponti and G. Johnson (Preceptor), Summer Research Fellowship (SURF): "Elastic and Flow Properties of Temporary Soft Denture Liners," 1987. NIH/NIDR Short‐Term Training Grant #DE‐07150, $2638

14. D. Drennon (PI) and G. Johnson, Sponsored Research Grant from Sporicidin International, Washington, D.C.: "An Investigation of the Effects of Surface Disinfectant Sprays on the Dimensional Accuracy and Surface Detail of Elastomeric Impressions." Period: February 1, 1987 ‐ September 30, 1987. Grant #65‐5233, $2947

15. D. Drennon (PI) and G. Johnson, Sponsored Research Grant from Pascal Co., Bellevue, WA: "A Study of the Effects of Disinfectants on the Surface Characteristics of Impression Materials and Gypsum Products." Period: January 1, 1987 ‐ May 30, 1987. Grant #65‐ 5205, $8973

16. D. Drennon (PI) and G. Johnson, Sponsored Research Grant from Alcide Corp., Norwalk, CT: "Effect of Disinfection of Elastomeric Impressions with Chlorine Dioxide." Period: February 1, 1987 ‐ December 31, 1987. Grant #65‐5238, $2838

17. D. Drennon (PI) and G. Johnson, Sponsored Research Grant from Pascal Co., Bellevue, WA: "Effect of Disinfection of Elastomeric Impressions with a Chloro‐phenol Spray." Period: July 1, 1987 ‐ March 31, 1988. Grant #65‐5314, $3498

18. D. Drennon (PI) and G. Johnson, Sponsored Research Grant from Block Drug Co., Jersey City, NJ: "Effect of the Use of Vitacide and Vitaphene Disinfectants on Elastomeric Impressions." Period: March 1, 1988 ‐ October 31, 1989. Grant #65‐5528, $6798

19. G.E. Gordon (PI), G. Johnson, and D. Drennon, Sponsored Research Grant from Block Drug Co., Jersey City, NJ: "Effect of Tray Selection on the Accuracy of Elastomeric Impressions." Period: March 1, 1988 ‐ October 31, 1989. Grant #65‐5527, $4510

20. L.V. Powell (PI), G.E. Gordon, and G. Johnson, Sponsored Research Grant from the 3M Company, St. Paul, MN: "Clinical Evaluation of Tooth‐Colored Restorative Materials in a Cervical Class V Situation," Period: January 15, 1988 ‐ January 14, 1991. Grant #65‐ 5479, $17,565

21. J. Duffin, D. Bales (Preceptor), and G. Johnson, Summer Research Fellowship (SURF): "Fracture Resistance of Castable Ceramic Crowns" 1988. NIH/NIDR Short‐Term Training Grant #DE‐07150, $2638

22. G.E. Gordon (PI), T. Ma, and G. Johnson, Biomedical Research Support Grant (BRSG): " Effect of Chemical Disinfectants on Surface Texture and Color of Cast Dental Restorations", Period: October 1, 1988 ‐ September 30, 1989. NIH/NIDR Grant #RR‐05346, $6177.

23. M. Stern (PI), G. Johnson, and L.B. Toolson, Biomedical Research Support Grant (BRSG): "An Evaluation of Dental Stones after Repeated Exposure to Spray Disinfectants", Period: September, 1988 ‐ August, 1989. NIH/NIDR Grant #RR‐05346, $4000.

24. J.L. Duffin, D.J. Bales (Preceptor), and G.H. Johnson: Summer Research Fellowship (SURF): "Evaluation of Fracture Resistance of Two Ceramic Crown Techniques," 1989. NIH/NIDR Short‐Term Training Grant #DE‐07150, $2638

25. D.L. Falcone, G.E. Gordon (Preceptor), G.H. Johnson, Summer Research Fellowship (SURF): "Correlation of Shear Strength and Microleakage in Dentin Bonding Systems," 1989. NIH/NIDR Short‐Term Training Grant #DE‐07150, $2638

26. K. Chellis, G. Johnson (Preceptor), and G.E. Gordon, Summer Research Fellowship (SURF): "Accuracy and Surface Quality of Gypsum Casts Recovered From Disinfected Alginate Impressions," 1989. NIH/NIDR Short‐Term Training Grant #DE‐07150, $2638

27. L.V. Powell (PI), G.H. Johnson, and G.E. Gordon. Sponsored research by Youdelis and Associates, Inc., Windsor, Ontario. "A Comparison of Mercury Vapor Release During Removal of Amalgam Restorations," Period: March 1989 ‐ October 1991, $600.

28. T. Ma (PI), G. Johnson, and G.E. Gordon, Biomedical Research Support Grant (BRSG): "Effect of Chemical Disinfectants on Color of Denture Resins", Period: June 1989 ‐ May 1990, NIH/NIDR Grant #RR‐05346, $5936.


29. H. Strand (PI), G. Johnson, and R. Persson, Sponsored Research Grant from Pascal Co., Bellevue, WA: "Clinical Evaluation of Tissue Displacement by Gingival Retraction Chord," Period: October 15, 1989 ‐ December 31, 1990, Grant #65‐6099, $22,800.

30. G. Johnson (PI), L.V. Powell, and T. DeRouen, Sponsored Research Grant from the ESPE Company, Seefeld, W. Germany: "Prevalence of Postoperative Sensitivity Associated with the Use of Glass Ionomer and Zinc Phosphate Luting Cements," Period: January 1, 1990 ‐ June 30, 1991, Grant administered by sponsor, $63,045.

31. K.A. Omnell (PI), R. Page, and Others, NIH/NIDR Clinical Research Core Center Grant, Section leader of Clinical Biomaterials Research. Funding for 1990‐1995.

32. R. McCoy (PI), M.H. Anderson, X. Lepe and G.H. Johnson, Sponsored Research Grant from Coltene AG, Altstaetten, Switzerland: "Longitudinal Dentin Adhesive Trial Using a Dentin Bonding System," Period: July 1, 1991 ‐ Sept. 30, 1995, Grant #63‐0316, $23,010.

33. R. McCoy (PI), M.H. Anderson, X. Lepe and G.H. Johnson, Sponsored Research Grant from Bisco, Inc., Downers Grove, IL: "Clinical Evaluation of Dentin Adhesion with a Hydrophilic Resin," Period: July 1, 1991 ‐ Sept. 30, 1995, Grant #63‐0751, $11,037.

34. M.W. Richards (PI), M. Bagby, S.R. Okubo, G.H. Johnson. , Sponsored Research Grant from Bisco, Inc., Itasca, IL : “Control of Pulpal Sensitivity in Crown Fabrication Procedures.” Clinical trial at West Virginia University School of Dentistry. Period: September 1, 1995 ‐ December 31, 1998. Grant =$21,682.

35. T. DeRouen (PI), NIDR Grant Application entitled “Casa Pia Study of Dental Amalgams in Children” Funded July 1996. $6,100,000. GH Johnson is a Consultant for the study.

36. TC Aw (PI), X Lepe, GH Johnson and L Mancl; Sponsored Research Grant from 3M Company, St. Paul, MN : “Clinical Evaluation of Two Bonding Agents for Class V Resin Composite Restorations.” Grant #63‐9963, Period: October 1, 1998 ‐ April 1, 2001. Grant = $35,868.

37. X Lepe (PI), TC Aw, GH Johnson and L Mancl; Sponsored Research Grant from Coltène AG, Altstätten, Switzerland: “Clinical Evaluation of Coltène One Coat Bond for Class V Resin Composite Restorations.”, Grant #66‐0302, Period: Dec 1, 1997 ‐ June 1, 2001. Grant = $32,962.

38. K Phillips (PI), P Pospiech, TC Aw, and GH Johnson; Sponsored Research Grant from Ivoclar‐Vivadent, Schaan, Lichtenstein: “Clinical Evaluation of Empress 2 for Single Posterior Dental Implants.”, Grant #66‐2395, Period: October 1, 1999 – October 1, 2003. Grant = $38,231.

39. Jorge Leitão (C0‐PI), António Vasconcelos Tavares (C0‐PI), Mário Bernardo (Investigator), G. Johnson (Consultant); Research study at the University of Lisbon sponsored by Ivoclar‐Vivadent, Schaan, Lichtenstein: “Clinical Evaluation of a New Indirect Composite Material.”, Period: September 2001‐ December 2005.

40. G. Johnson (PI), T Junge, X Lepe, L Mancl, ER Schwedhelm, D. Verhoef. Sponsored Research Grant from Dentsply Caulk, Milford, DE. "Clinical Success Rates of Addition Silicone and Polyether Dental Impression Systems" Period: September 29, 2003 ‐ December 31, 2004. Grant # 66‐7398, $18,125.

41. A. Raidgroski (PI), H. Zhang, GH Johnson. Sponsored Research Contract from 3M ESPE, Seefeld, Germany. “Anterior Zirconia‐Based Crowns with a Wax Knife LAVA System (3M ESPE) ‐ a clinical study. “ Period: October 1, 2004 – September 30, 2008. Contract #66‐9681, $144,000.

42. G. Johnson (PI), P Rammelsberg. A Multicenter clinical trial investigating the success rates of polyether impressions when mixed dynamically and by static mixing. Sponsor 3M ESPE and conducted in Heidelberg and Homburg/Saar, Germany. Period: Oct 2008‐Aug 2009, € 23,000

43. GH Johnson, K Shor, MH Kronström. Retention of Metal‐Ceramic Crowns for RelyX Unicem 2 Automix Cement with Long‐term Aging. Sponsor 3M ESPE. Period: Oct 2010‐October 2011. Contract #63‐0709, $11,142.

44. GH Johnson (PI), X Lepe, O Schäfer. Retention of Lithium‐disilicate Crowns with Long‐term Aging for RelyX Ultimate Cement. Sponsor 3M ESPE. Period: April 1, 2013 – December 31, 2014. Contract # 66‐7402, $16,105.

Grants Submitted/Approved 1. Grants Submitted/Not Funded 1. Bales, DJ and others, Clinical Core Center for Preventive and Operative Dentistry, NIDR Grant, Pilot Project 10:

Evaluation of Biologically Active Pulp Capping Agent. Submitted December 3, 1992. No Centers funded. The proposed pilot project received the second best priority score of 12 pilot projects.

2. K Phillips (PI), TC Aw, GH Johnson and J. Kois; Sponsored Research Grant from Atlantis Components Inc, Cambridge, MA: “Clinical Evaluation of a New Implant Abutment for Posterior Restorations”, Period: April 1, 2000 – October 1, 2004.

3. S. Dogon (PI), G. Ibarra, G.H. Johnson, L. Mancl. Clinical Evaluation of Adper™ Easy Bond Adhesive for Class V Resin Composite Restorations in Non‐carious Cervical Lesions in Adults. Sponsor: 3M ESPE, St. Paul, MN. Period: July 2008‐July 2010. Contract withdrawn by 3M ESPE in Oct 2008. $47,927.

4. M. Kronström (PI), S. Dogan, G. Johnson. Sponsored research grant from Nobel Biocare, Gothenburg, Sweden, for “Prospective Randomized Clinical Trial to Evaluate the Outcome of Treatments with Implant Supported Restorations with Two Different Materials used as a Substructure”, Period: July 2008 – July 2012. Approved, but later withdrawn. $77,000.


Book Reviews 1. Review of Dental Materials: Properties and Selection, Edited by William J. O'Brien. Published by Quintessence Inc.,

1989, published in Operative Dentistry 15:38, Winter 1990. 2. Review of Impressions: A Text for Selection of Materials and Techniques by Harry F. Albers. Published by Alto Books,

Santa Rosa, CA, published in Operative Dentistry 16:37‐38, Jan‐Feb 1991. Published Abstracts 1. G.H. Johnson, A. Herbert, and J. Powers: Properties of Glass Ionomer Luting Cements, Journal of Dental Research

62:190, March, 1983. 2. R.G. Craig and G.H. Johnson: Accuracy and Bond Strength of Agar/Alginate Hydrocolloid Impressions, Journal of

Dental Research 63:277, March 1984. 3. G.H. Johnson and R.G. Craig: Accuracy of Addition Silicone Impression Materials as a Function of Technic, Journal of

Dental Research 63:277, March 1984. 4. J. Bunch and G.H. Johnson: Evaluation of Hard Direct Reline Resins, Journal of Dental Research 64:275, March 1985. 5. G.H. Johnson: A Laboratory Evaluation of Two New Dental Amalgam Alloys, Journal of Dental Research 64:277, March

1985. 6. G.H. Johnson, C.H. Daly, and J.I. Nicholls: Static and dynamic properties of the human periodontal ligament. Trans. of

the Society for Biomaterials 8:42, April 1985. 7. D.H. Pratten and G.H. Johnson: Surface Roughness of a Microfilled Anterior and a Highly‐filled Posterior Composite

Resin Following Various Finishing Techniques, Journal of Dental Research 65:345, March 1986. 8. G.H. Johnson, G.E. Gordon, and D.J. Bales: Post‐operative Sensitivity of Various Direct Posterior Restorative Systems,

J. of Dental Research 65:813, June 1986. 9. G.H. Johnson and D.G. Drennon: Clinical Evaluation of Detail Reproduction of Elastomeric Impression Materials,

Journal of Dental Research 66:331, March 1987. 10. G.H. Johnson and D.G. Drennon: The Effect of Disinfectants on the Accuracy of Elastomeric Impression Materials,

Journal of Dental Research 66:331, March 1987. 11. D.G. Drennon and G.H. Johnson: The Accuracy of Elastomeric Impressions Disinfected by Spray Atomization, Journal

of Dental Research 67:282, March 1988. 12. D.G. Drennon and G.H. Johnson: The Effect of Immersion Disinfection of Elastomeric Impression on the Surface

Reproduction of Improved Gypsum Casts, Journal of Dental Research 67:282, March 1988. 13. G.E. Gordon, G.H. Johnson, and D.G. Drennon: The Effects of Tray Selection on the Accuracy of Elastomeric

Impressions, Journal of Dental Research 67:281, March 1988. 14. G.H. Johnson, D.J. Bales, and L.V. Powell: Thirty‐Month Clinical Results for a New Dental Amalgam Containing

Admixed Indium, Journal of Dental Research 67:117, March 1988. 15. L.V. Powell, G.H. Johnson, and D.J. Bales: Effect of Admixed Indium on Mercury Vapor Release from Amalgam Alloys,

Journal of Dental Research 67:117, March 1988. 16. T.M. Ponti, G.H. Johnson, J.S. Brudvick, and C.H. Daly: Elastic and Flow Properties of Temporary Soft Denture Liners,

Journal of Dental Research 67:198, March 1988. 17. J.W. Stoddard and G.H. Johnson: An Evaluation of Polishing Agents for Anterior and Posterior Composite Resins,

Journal of Dental Research 67:363, March 1988. 18. T. Taylor, G. Johnson, and D. Heid: Clinical Evaluation of a Nystatin Pastille in Denture Stomatitis, Journal of Dental

Research 67:135, March 1988. 19. G.H. Johnson, D.G. Drennon, and G.L. Powell: Making a Good Impression (abstract), Journal of the American Dental

Association 116:590, April 1988. 20. D.H. Pratten and G.H. Johnson: Effect of Finishing Instruments on Surface of Composites (abstract), Block Digest

28(4), December 1988. 21. G.H. Johnson, D.G. Drennon, and G.L. Powell: Accuracy of Elastomeric Impressions Disinfected by Immersion,

Operative Dentistry, 14(1), Winter, 1989. 22. D.H. Pratten and G.H. Johnson: An Evaluation of Finishing Instruments for an Anterior and Posterior Composite

(abstract), Operative Dent, 14(1), Winter 1989. 23. G.H. Johnson, D.J. Bales, and G.E. Gordon: Clinical Performance of Posterior Composite and Dental Amalgam after

Three Years. Journal of Dental Research 68:187, March 1989. 24. J.L. Duffin, D.J. Bales, and G.H. Johnson: Fracture Resistance of Castable Ceramic Crowns. Journal of Dental Research

68:235, March 1989. 25. L.V. Powell, G.E. Gordon, and G.H. Johnson: Pre‐Operative and Post‐Operative Sensitivity Associated with Class 5

Tooth‐Colored Restorations. Journal of Dental Research 68:187, March 1989. 26. J.D. Weaver, G.H. Johnson, and D.J. Bales: Marginal Adaptation of Castable Ceramic Crowns. Journal of Dental

Research 68:200, March 1989. 27. D.J. Bales, D.J. Duffin, and G. H. Johnson: Evaluation of Fracture Resistance of Two Ceramic Crown Techniques.

Journal of Dental Research 69:176, March 1990. 28. G.E. Gordon, D.J. Falcone, and G.H. Johnson: Correlation of Shear Strength and Microleakage in Dentin Bonding

Systems. Journal of Dental Research 69:285, March 1990.


29. G.L. Powell, J.R. Whisenant, B.A. Saxon, and G. H. Johnson: Efficacy of Spray and Immersion Disinfectants in Simulated Use Tests, Journal of Dental Research 69:348, March 1990.

30. G.H. Johnson, K.D. Chellis, and G.E. Gordon: Dimensional Stability and Detail Reproduction of Disinfected Alginate and Elastomeric Impressions, Journal of Dental Research 69:368, March 1990.

31. M.A. Stern, G.H. Johnson, and L.B. Toolson: Evaluation of Dental Stones after Repeated Exposure to Spray Disinfectants, Journal of Dental Research 69:368, March 1990.

32. G.H. Johnson, D.J. Bales, and G.E Gordon: Direct Clinical Comparison of Amalgam and Composite Restorations. Journal of Dental Research 70:343, April 1991.

33. G.H. Johnson, D.J. Bales, and L.V. Powell: Effect of Admixed Indium on the Clinical Success of Amalgam Alloys. Journal of Dent Research 70:344, April 1991.

34. J.W. Stoddard and G.H. Johnson: A Comparative Evaluation of Composite Polishing Agents. Journal of Dental Research 70:547, April 1991.

35. L.V. Powell, G.H. Johnson, and G.E. Gordon. Clinical Evaluation of Class 5 Abrasion/Erosion Restorations. Journal of Dental Research 72:705, 1992.

36. G.H. Johnson, L.V. Powell, and T.A. DeRouen. Pulpal Sensitivity from Zinc Phosphate and Glass Ionomer Cements Following Crown Cementation. Journal of Dental Research 72:704, 1992.

37. G.H. Johnson, L.V. Powell, and G.E. Gordon. Dentin Bonding Systems: Current Products and Techniques. Dental Study Club Journal of Continuing Education 1(2), 7, April 1992.

38. M. Yashar, L.V. Powell, G.H. Johnson, and DJ Bales. Mercury Vapor Release during Insertion and Removal of Dental Amalgam. Journal of Dental Research 72:112, 1993

39. A.D. Liou and G.H. Johnson. Dimensional Accuracy of Master Casts using Type V Dental Gypsum. Journal of Dental Research 73:309, 1994

40. X. Lepe, G.H. Johnson, and J.C. Berg. Long Term Disinfection of Polyether and Addition Silicone Impressions. Journal of Dental Research 73:409, 1994

41. X. Lepe, D.J. Bales and G.H. Johnson. Tensile Dislodgment Evaluation of Two Experimental Prefabricated Post Systems. Journal of Dental Research 74:234, 1995.

42. G.H. Johnson, L.R. Hazelton and D.J. Bales. Crown Retention with Use of a Resin Sealer on Prepared Dentin. Journal of Dental Research 75:257, 1996.

43. X. Lepe and G.H. Johnson. Accuracy of Polyether and Addition Silicone After Long Term Disinfection. Journal of Dental Research 75:51, 1996.

44. R.B. McCoy, M.H. Anderson, X. Lepe and G.H. Johnson. Three‐year Clinical Results of Class V Resin Restorations without Mechanical Retention. Journal of Dental Research 75:23, 1996.

45. G.H. Johnson, X. Lepe and D.J. Bales. Crown Retention with Use of a 5 % Glutaraldehyde Sealer on Prepared Dentin. Journal of Dental Research 76:136, 1997.

46. D.J. Bales, G.H. Johnson, and X. Lepe. Retention of Provisional Crowns with Four Types of Temporary Cement. Journal of Dental Research 76:155, 1997.

47. X. Lepe, G.H. Johnson, and J.C. Berg. Effect of Mixing Technique on Surface Characteristics of Impression Materials. Journal of Dental Research 76:181, 1997.

48. MW Richards, SR Okubo, MD Bagby, G.H. Johnson and LB Brown. Efficacy of Sealing Teeth following Crown Preparation. Journal of Dental Research 77(Spec Issue A):125 (Abstract 155), 1998.

49. G.H. Johnson, X. Lepe and J.C. Berg. Effect of Moisture on the Quality of Crown and Bridge Impressions. Journal of Dental Research 77(Spec Issue B):798 (Abstract 1336), 1998.

50. G.H. Johnson, X. Lepe and T.C. Aw. Detail Reproduction for Single versus Dual Viscosity Impression Techniques. Journal of Dental Research 78(Spec Issue B):140 (Abstract 273), 1999.

51. G.H. Johnson, X. Lepe, and D.J. Bales: Crown Retention with Use of a 5% Glutaraldehyde Sealer on Prepared Dentin. 1999 Year Book of Dentistry, CV Mosby, LH Meskin, Editor, p.20.

52. K. Phillips, X. Lepe, T.C. Aw, G.H. Johnson. Accuracy of Impregum Penta and Impregum Penta Soft with Disinfection. Journal of Dental Research 79(Spec Issue B):625 (Abstract 3875), 2000.

53. M.F. Bernardo, M.D. Martin, G.H. Johnson, J. Leitão. Clinical Evaluation of a composite resin polymerised by two different methods. International Dental Journal 50(Supplement):333 (FDI Abstract), 2000.

54. K. Phillips, T.C. Aw, G.H. Johnson. Accuracy of Three Monophase Impression Materials with Immersion Disinfection. Journal of Dental Research 80(Spec Issue B):245 (Abstract 1678), 2001.

55. X. Lepe, G.H. Johnson, T.C. Aw. Detail Reproduction of Three Mechanically‐mixed Monophase Impression Materials. Journal of Dental Research 80(Spec Issue B):245 (Abstract 1677), 2001.

56. G.H. Johnson, D. Ballard, J. McGoldrick, S. Theilke. A Methodology to Examine Dentin Wear Associated with Powered Toothbrushes. Journal of Dental Research 80(Spec Issue):548 (Abstract 0174), 2001.

57. Bernardo MF, Martin, MD, Johnson, GH, Leitão J. Clinical evaluation of a composite restorations polymerized by two different methods. Two year results. Journal of Dental Research 81 (Spec Issue):A81 (Abstract 0442), 2002.

58. GH Johnson, X Lepe, DJ Bales. Crown Retention for Two Resin‐Modified Glass Ionomer and Two Composite Resin Luting Cements. Journal of Dental Research 82 (Spec Issue B):B319 (Abstract 2469), 2003.

59. G Ibarra, GH Johnson, W Geurtsen, and MA Vargas. Veneer microleakage on enamel and dentin using a self‐adhesive cement. Journal of Dental Research 83, Spec Issue B, (Abstract 3197), 2004.


60. G.H. Johnson, L.A. Mancl, E.R. Schwedhelm, D.R. Verhoef, T. Junge, and X. Lepe. Clinical Success Rates for Polyvinylsiloxane and Polyether Dual‐Viscosity Impressions. Journal of Dental Research 84, Spec Issue A, Abstract 0362, 2005.

61. C.P.K. Wadhwani, G.H. Johnson, X. Lepe, and A. Raigrodski. Accuracy of Newly Formulated Fast‐Setting Elastomeric Impression Materials with Disinfection. Journal of Dental Research 84, Spec Issue A, Abstract 1634, 2005.

62. G. Johnson, X. Lepe, and H. Zhang. Crown Retention for Paste‐Paste Formulations of Resin‐modified Glass Ionomer Cements. Journal of Dental Research 84, Spec Issue A, Abstract 2894, 2005.

63. R. P. Palacios, G. H. Johnson, K. Phillips, A. J. Raigrodski. Retention of zirconium‐oxide ceramic crowns for three types of cement. J Dent Res 85(Spec Issue (A):0211, 2006.

64. A.H. Kang, G.H. Johnson, X. Lepe. Accuracy of High Viscosity VPS Impression Materials Using Dual‐arch Trays. J Dent Res 86(Spec Issue A:0182, 2007.

65. G.H. Johnson, X. Lepe and J.C. Wataha. Effectiveness of self‐adhesive cements in retaining cast crowns. J Dent Res 87(Spec Iss A):0194, 2008.

66. K.‐H. Chung, M. Fletcher‐Stark, M. Anderson, G. Johnson, J. Wataha, and J.‐G. Duhr. Retention Characteristics of Magnetic Overdenture Attachments After Cyclic Loading. J Dent Res 87(Spec Iss A): 0909, 2008.

67. M.H. Kronstrom, G.H. Johnson, R.W. Hompesch. Accuracy of a Generically New Elastomeric Impression Material with Disinfection. J Dent Res 88(Spec Iss A):3155, 2009.

68. T. Stober, G. Johnson, M. Schmitter, and P. Rammelsberg.. Dimensional Accuracy of the new Vinylsiloxanether Impression Material with Disinfection. J Dent Res 89(Spec Iss A):2887, 2010.

69. G.H. Johnson, M.H. Kronström, and J.S. Emerson, Effectiveness of simple cementation of zirconium‐oxide crowns; no intaglio treatment, J Dent Res 89(Spec Iss A):144556, 2011.

70. G.H. Johnson, K. Shor and M.H. Kronström. Crown retention after long‐term specimen aging for self‐adhesive modified‐resin cements. Oral presentation at the 2011 AADR meeting, March 21‐24, Orlando, FL. Abstract 1221.

71. GH. Johnson, X. Lepe, O. Schäfer, A. Patterson. Effectiveness of New Resin Cements in Retaining Lithium Disilicate Crowns. Presentation at the 2015 IADR meeting, March 11‐14, Boston, MA. Abstract 3640.

Abstract Accepted 1.

Microfilmed Publications 1. G. Johnson, A. Herbert, and J. Powers: Properties of glass ionomer luting cements. Microfilmed paper No. 189, Dental

Materials Group, Annual Session of the American Association for Dental Research, March 17‐20, 1983, Cincinnati, OH.

2. R.G. Craig and G.H. Johnson: Accuracy and Bond Strength of Agar/Alginate Hydrocolloid Impressions. Microfilmed paper No. 956, Dental Materials Group, 62nd General Session of the International Association for Dental Research, March 15‐18, 1984, Dallas, TX.

3. G.H. Johnson and R.G. Craig: Accuracy of Addition Silicone Impression Materials as a Function of Technic. Microfilmed paper No. 959, Dental Materials Group, 62nd General Session of the International Association for Dental Research, March 15‐18, 1984, Dallas, TX.

4. J. Bunch and G.H. Johnson: Evaluation of Hard Direct Reline Resins. Microfilmed paper No. 907, Dental Materials Group, 63rd General Session of the International Association for Dental Research, March 21‐24, 1985, Las Vegas, NV.

5. G.H. Johnson: A laboratory evaluation of two new dental amalgam alloys. Microfilmed paper No. 921, Dental Materials Group, 63rd General Session of the International Association for Dental Research, March 21‐24, 1985, Las Vegas, NV.

6. D.H. Pratten and G.H. Johnson: Surface Roughness of a Microfilled Anterior and a Highly‐filled Posterior Composite Resin Following Various Finishing Techniques. Microfilmed paper No. 1589, Dental Materials Group, Annual Session of the American Association for Dental Research, March 12‐15, 1986, Washington, DC.

7. G. Johnson, G. Gordon, and D. Bales: Post‐operative sensitivity of various direct posterior restorative systems. Microfilmed paper No. 787, Dental Materials Group, 64th General Session of the International Association for Dental Research, June 26‐28, 1986, The Hague, Netherlands.

8. G.H. Johnson and D.G. Drennon: Clinical Evaluation of Detail Reproduction of Elastomeric Impression Materials. Microfilmed paper No. 1794, Dental Materials Group, 65th General Session of the International Association for Dental Research, March 11‐15, 1987, Chicago, IL.

9. G.H. Johnson and D.G. Drennon: The Effect of Disinfectants on the Accuracy of Elastomeric Impression Materials. Microfilmed paper No. 1795, Dental Materials Group, 65th General Session of the International Association for Dental Research, March 11‐15, 1987, Chicago, IL.

10. D.G. Drennon and G.H. Johnson: The Accuracy of Elastomeric Impressions Disinfected by Spray Atomization, Microfilmed paper No. 1354, Dental Materials Group, 66th General Session of the International Association for Dental Research, March 9‐13, 1988, Montreal, Canada.


11. D.G. Drennon and G.H. Johnson: The Effect of Immersion Disinfection of Elastomeric Impression on the Surface Reproduction of Improved Gypsum Casts, Microfilmed paper No. 1356, Dental Materials Group, 66th General Session of the International Association for Dental Research, March 9‐13, 1988, Montreal, Canada.

12. G.E. Gordon, G.H. Johnson, and D.G. Drennon: The Effects of Tray Selection on the Accuracy of Elastomeric Impressions, Microfilmed paper No. 1351, Dental Materials Group, 66th General Session of the International Association for Dental Research, March 9‐13, 1988, Montreal, Canada.

13. G.H. Johnson, D.J. Bales, and L.V. Powell: Thirty‐Month Clinical Results for a New Dental Amalgam Containing Admixed Indium, Microfilmed paper No. 39, Dental Materials Group, 66th General Session of the International Association for Dental Research, March 9‐13, 1988, Montreal, Canada.

14. L.V. Powell, G.H. Johnson, and D.J. Bales: Effect of Admixed Indium on Mercury Vapor Release from Amalgam Alloys, Microfilmed paper No. 40, Dental Materials Group, 66th General Session of the International Association for Dental Research, March 9‐13, 1988, Montreal, Canada.

15. T.M. Ponti, G.H. Johnson, J.S. Brudvick, and C.H. Daly: Elastic and Flow Properties of Temporary Soft Denture Liners, Microfilmed paper No. 682, Dental Materials Group, 66th General Session of the International Association for Dental Research, March 9‐13, 1988, Montreal, Canada.

16. J.W. Stoddard and G.H. Johnson: An Evaluation of Polishing Agents for Anterior and Posterior Composite Resins, Microfilmed paper No. 2000, Dental Materials Group, 66th General Session of the International Association for Dental Research, March 9‐13, 1988, Montreal, Canada.

17. G.H. Johnson, D.J. Bales, and G.E. Gordon: Clinical Performance of Posterior Composite and Dental Amalgam after Three Years. Microfilmed paper No. 41, Dental Materials Group, l8th Annual Session of the American Association for Dental Research, March 15‐ 19, 1989, San Francisco, CA.

18. L.V. Powell, G.E. Gordon, and G.H. Johnson, Pre‐Operative and Post‐Operative Sensitivity Associated with Class 5 Tooth‐Colored Restorations. Microfilmed paper No. 42, Dental Materials Group, 18th Annual Session of the American Association for Dental Research, March 15‐19, 1989, San Francisco, CA.

19. J.L. Duffin, D.J. Bales, and G.H. Johnson: Fracture Resistance of Castable Ceramic Crowns. Microfilmed paper No. 429, Dental Materials Group, 18th Annual Session of the American Association for Dental Research, March 15‐19, 1989, San Francisco, CA.

20. D.J. Bales, D.J. Duffin, and G. H. Johnson: Evaluation of Fracture Resistance of Two Ceramic Crown Techniques. Microfilmed paper No. 538, Dental Materials Group, 68th General Session of the International Association for Dental Research, March 7‐11, 1990, Cincinnati, OH.

21. G.E. Gordon, D.J. Falcone, and G.H. Johnson: Correlation of Shear Strength and Microleakage in Dentin Bonding Systems. Microfilmed paper No. 1415, Dental Materials Group, 68th General Session of the International Association for Dental Research, March 7‐11, 1990, Cincinnati, OH.

22. M.A. Stern, G.H. Johnson, and L.B. Toolson: Evaluation of Dental Stones after Repeated Exposure to Spray Disinfectants. Microfilmed paper No. 2077, Dental Materials Group, 68th General Session of the International Association for Dental Research, March 7‐11, 1990, Cincinnati, OH.

23. G.H. Johnson, K.D. Chellis, and G.E. Gordon: Dimensional Stability and Detail Reproduction of Disinfected Alginate and Elastomeric Impressions. Microfilmed paper No. 2078, Dental Materials Group, 68th General Session of the International Association for Dental Research, March 7‐11, 1990, Cincinnati, OH.

24. G.H. Johnson, D.J. Bales, and G.E Gordon: Direct Clinical Comparison of Amalgam and Composite Restorations. Microfilmed paper No. 622, Dental Materials Group, 69th General Session of the International Association for Dental Research, April 17‐21, 1991, Acapulco, Mexico.

25. G.H. Johnson, D.J. Bales, and L.V. Powell: Effect of Admixed Indium on the Clinical Success of Amalgam Alloys. Microfilmed paper No. 629, Dental Materials Group, 69th General Session of the International Association for Dental Research, April 17‐21, 1991, Acapulco, Mexico.

26. J.W. Stoddard and G.H. Johnson: A Comparative Evaluation of Composite Polishing Agents. Microfilmed paper No. 22476, Dental Materials Group, 69th General Session of the International Association for Dental Research, April 17‐21, 1991, Acapulco, Mexico.

27. G.H. Johnson, L.V. Powell, and T.A. DeRouen. Pulpal Sensitivity from Zinc Phosphate and Glass Ionomer Cements Following Crown Cementation. Microfilmed paper No. 1505, Dental Materials Group, 70th General Session of the International Association for Dental Research, July 1‐5, 1992, Glasgow, Scotland.

28. L.V. Powell, G.H. Johnson, and G.E. Gordon. Clinical Evaluation of Class 5 Abrasion/Erosion Restorations. Microfilmed paper No. 1514, Dental Materials Group, 70th General Session of the International Association for Dental Research, July 1‐4,1992, Glasgow, Scotland.

29. M. Yashar, L.V. Powell, G.H. Johnson, and DJ Bales. Mercury Vapor Release during Insertion and Removal of Dental Amalgam. Microfilmed paper No. 70, Dental Materials Group, 71st General Session of the International Association for Dental Research, March 10‐14,1993, Chicago, Illinois.

30. X. Lepe, G.H. Johnson, and J.C. Berg. Long Term Disinfection of Polyether and Addition Silicone Impressions. Microfilmed paper No. 2456, Dental Materials Group, 72th General Session of the International Association for Dental Research, March 10‐13, 1994, Seattle, WA.

31. G.H. Johnson, L.R. Hazelton and D.J. Bales. Crown Retention with Use of a Resin Sealer on Prepared Dentin. Microfilmed paper No. 1918, Dental Materials Group, 74th General Session of the International Association for Dental Research, March 13‐17, 1996, San Francisco, CA.


32. R.B. McCoy, M.H. Anderson, X. Lepe and G.H. Johnson. Three‐year Clinical Results of Class V Resin Restorations without Mechanical Retention. Microfilmed paper No. 46, Dental Materials Group, 74th General Session of the International Association for Dental Research, March 13‐17, 1996, San Francisco, CA.

33. G.H. Johnson, X. Lepe and D.J. Bales. Crown Retention with Use of a 5 % Glutaraldehyde Sealer on Prepared Dentin. Microfilmed paper No. 0984, Dental Materials Group, 75th General Session of the International Association for Dental Research, March 19‐23, 1997, Orlando, FL

Publications‐Books 1. Encyclopedia on Science and Technology, 7th edition, McGraw‐Hill, 1990. GH Johnson Contributing author. Authored

the Dental Materials section under Dentistry, pp. 109‐112. 2. Restorative Dental Materials, 11th Edition, Mosby Inc., 2002., Edited by Robert G. Craig and John M. Powers. Glen H.

Johnson contributing author. Authored Chapter 11 ‐ Amalgam (pp. 287‐328) and Chapter 12 ‐ Impression Materials (pp. 329‐390).

3. Restorative Dentistry Clinical Reference, 2014. 48 pages. Concise clinical guide for UW School of Dentistry students, faculty, affiliate faculty, dental assistants and dispensary personnel.

Publications ‐ Major Peer‐Reviewed Journals 1. G.H. Johnson and R.G. Craig: Accuracy of four types of rubber impression materials versus time of pour and a repeat

pour of models. Journal of Prosthetic Dentistry 53:484‐490, April, 1985. 2. G.H. Johnson and R.G. Craig: Accuracy and bond strength of combinations of agar/alginate hydrocolloid impression

materials. Journal of Prosthetic Dentistry 55:1‐6, January, 1986. 3. G.H. Johnson and R.G. Craig: Accuracy of addition silicone impression materials as a function of technic. Journal of

Prosthetic Dentistry 55:197‐203, February 1986. 4. J. Bunch, G.H. Johnson and J.S. Brudvick: Evaluation of hard direct reline resins. Journal of Prosthetic Dentistry 57:512‐

519, April 1987. 5. G.H. Johnson, G.E. Gordon, and D.J. Bales: Postoperative sensitivity associated with posterior composite and

amalgam restorations. Operative Dentistry 13:66‐73, Spring 1988. 6. G.H. Johnson, D.G. Drennon, and G.L. Powell: Accuracy of elastomeric impressions disinfected by immersion. Journal

of the American Dental Association 116:525‐530, April, 1988. 7. D.H. Pratten and G.H. Johnson: An evaluation of finishing instruments for an anterior and posterior composite resin.

Journal of Prosthetic Dentistry 60:154‐158, August 1988. 8. G.H. Johnson, A.H. Herbert, and J.M. Powers: Changes in properties of glass ionomer luting cements with time.

Operative Dentistry 13:191‐196, Autumn, 1988. 9. G.H. Johnson, T.D. Taylor, and D.W. Heid: Clinical evaluation of a nystatin pastille for treatment of denture‐related

oral candidiasis. Journal of Prosthetic Dentistry 61:699‐703, June 1989. 10. L.V. Powell, G.H. Johnson and D.J. Bales: Effect of admixed indium on mercury vapor release from dental amalgam.

Journal of Dental Research 68:1231‐1233, August, 1989. 11. D.G. Drennon, G.H. Johnson and G.L. Powell: The accuracy and efficacy of disinfection by spray atomization on

elastomeric impressions. Journal of Prosthetic Dentistry 62:468‐475, Oct 1989. 12. G.E. Gordon, G.H. Johnson, and D.G. Drennon: The effect of tray selection on the accuracy of elastomeric impression

materials. Journal of Prosthetic Dentistry 63:12‐15, January 1990. 13. D.G. Drennon and G.H. Johnson: The effect of immersion disinfection of elastomeric impressions on the surface detail

reproduction of improved gypsum casts, Journal of Prosthetic Dentistry 63(2):233‐241, February 1990. 14. L.V. Powell, G.E. Gordon, and G.H. Johnson: Sensitivity of restored abrasion/ erosion lesions. Journal of the American

Dental Association 121:694‐696, December 1990. 15. J.W. Stoddard and G.H. Johnson: An evaluation of polishing agents for composite resins. Journal of Prosthetic

Dentistry 65:491‐495, April 1991. 16. M.A. Stern, G.H. Johnson, and L.B. Toolson: An evaluation of dental stones after repeated exposure to spray

disinfectants. Part I: Abrasion and compressive strength. Journal of Prosthetic Dentistry, 65:713‐718, May 1991. 17. G.H. Johnson, L.V. Powell, and G.E. Gordon: Dentin Bonding Systems: A Review of Current Products and Techniques.

Journal of the American Dental Association 123:34‐41, July 1991. 18. L.V. Powell, G.E. Gordon, and G.H. Johnson: Clinical Evaluation of Direct Esthetic Restorations in Cervical

Abrasion/Erosion Lesions: One‐Year Results. Quintessence International 22:687‐692, 1991. 19. J.D. Weaver, G.H. Johnson, and D.J. Bales, "Marginal adaptation of castable ceramic crowns," Journal of Prosthetic

Dentistry, 66: 747‐753, December 1991. 20. G.H. Johnson, D. J. Bales and L. V. Powell; "Clinical evaluation of high‐copper dental amalgam with and without

admixed indium", American Journal of Dentistry, 5:39‐42, February 1992. 21. L.V. Powell, G.E. Gordon, and G.H. Johnson: Clinical Comparison of Class V Composite Resin and Glass Ionomer

Restorations. American Journal of Dentistry 5:249‐252, 1992. 22. G.H. Johnson, D. J. Bales, G. E. Gordon and L. V. Powell; "Clinical performance of posterior composite restorations,"

Quint International 23:10 705‐711, Oct 1992. 23. G.H. Johnson, D. J. Bales, and L. V. Powell; "Effect of Admixed Indium on the Clinical Success of Amalgam

Restorations", Operative Dentistry, 17:5 196‐202, September/October 1992.


24. G.H. Johnson and L.V. Powell: The Effect of Admixed Indium on the Properties of a Dispersed‐phase High‐Copper Dental Amalgam. Dental Materials, 8:366‐369, November 1992.

25. G.H. Johnson, L.V. Powell, and T.A. DeRouen. "Evaluation and Control of Post‐Cementation Pulpal Sensitivity: Zinc Phosphate and Glass Ionomer Luting Cements," Journal of the American Dental Association, 124:39‐46, Nov. 1993.

26. L.V. Powell, G.H. Johnson, M. Yashar, and D.J. Bales. Mercury Vapor Release During Insertion and Removal of Dental Amalgam. Operative Dentistry, 19:2, March/April 1994, 70‐74 .

27. L.V. Powell, G.H. Johnson, and G.E. Gordon: Factors Associated with Clinical Success of Cervical Abrasion/Erosion Lesions. Operative Dentistry, 20:(1), January/February 1995, 7‐13.

28. X. Lepe, G.H. Johnson and J.C. Berg: Surface Characteristics of Polyether and Addition Silicone Impression Materials After Long Term Disinfection. Journal of Prosthetic Dentistry, 74: 181‐186, August 1995.

29. X. Lepe, D.J. Bales, and G.H. Johnson: Tensile Dislodgment Evaluation of Two Experimental Prefabricated Post Systems. Operative Dentistry, 21: 209‐212, September‐October 1996.

30. T. Ma, G.H. Johnson and G.E. Gordon: Effects of Chemical Disinfectants on the surface characteristics and color of denture resins. Journal of Prosthetic Dentistry, 77: 197‐204, February 1997.

31. X. Lepe and G.H. Johnson: Accuracy of Polyether and Addition Silicone after Long‐Term Immersion Disinfection. Journal of Prosthetic Dentistry, 78: 245‐249, September 1997.

32. G.H. Johnson, K.D. Chellis, G.E. Gordon and X. Lepe. Dimensional Stability and Detail Reproduction of Alginate and Elastomeric Impressions Disinfected by Immersion. Journal of Prosthetic Dentistry 79:446‐53, April 1998.

33. X. Lepe, G.H. Johnson, J.C. Berg, and T.C. Aw: Effect of Mixing Technique on Surface Characteristics of Impression Materials. Journal of Prosthetic Dentistry, 79: 495‐502, May 1998.

34. R.B. McCoy, M.H. Anderson, X. Lepe and G.H. Johnson. Clinical Success of Class V Composite Resin Restorations without Mechanical Retention. Journal of the American Dental Association, 129: 593‐599, May 1998.

35. G.H. Johnson, X. Lepe, and D.J. Bales: Crown Retention with Use of a 5% Glutaraldehyde Sealer on Prepared Dentin. Journal of Prosthetic Dentistry, 79: 671‐676, June 1998.

36. J.G. Serrano, X. Lepe, J.D. Townsend, G.H. Johnson and S. Thielke. An Accuracy Evaluation of Four Removable Die Systems. Journal of Prosthetic Dentistry, 80: 575‐586, November 1998.

37. X. Lepe, D.J. Bales, G.H. Johnson. Retention of Provisional Crowns Fabricated from Two Materials with the use of Four Temporary Cements. Journal of Prosthetic Dentistry, 81: 469‐75, April 1999.

38. T. Ma, G.H. Johnson and G.E. Gordon: Effects of Chemical Disinfectants on Surface Characteristics and Color of Three Fixed Prosthodontic Crown Materials. Journal of Prosthetic Dentistry, 82: 600‐607, November 1999.

39. RP Frank, SM Thielke, GH Johnson: The influence of tray type and other variables on the palatal depth of casts made from irreversible hydrocolloid impressions. Journal of Prosthetic Dentistry, 87:15‐22, January 2002.

40. K Graf, GH Johnson, A Mehl, P Rammelsberg,: The Influence of Dental Alloys on Three‐ BodyWear of Human Enamel and Dentin in an Inlay‐like Situation. Operative Dentistry 27:167‐174, March/April 2002.

41. TC Aw, X Lepe, GH Johnson, LA Mancl. Characteristics of non‐carious cervical lesions: A Clinical Investigation. J Am Dent Assoc, 133:725‐733, June 2002.

42. X Lepe, GH Johnson, JC Berg, TC Aw and GS Stroh. Wettability, imbibition and mass change of disinfected low viscosity impression materials. Journal of Prosthetic Dentistry, 88: 268‐76, October 2002.

43. JA Ceyhan, GH Johnson, X Lepe. The effect of tray selection, viscosity of impression material, and sequence of pour on the accuracy of dies made from dual‐arch impressions. Journal of Prosthetic Dentistry, 90: 143‐149, August 2003.

44. JC Berg, GH Johnson, X Lepe, S Adán‐Plaza. Temperature effects on the rheological properties of current polyether and polyvinylsiloxane impression materials during setting. Journal of Prosthetic Dentistry, 90: 150‐161, August 2003.

45. JA Ceyhan, GH Johnson, X Lepe, KM Phillips. A clinical study comparing the three dimensional accuracy of a working die generated from two dual‐arch trays and a full‐arch custom tray. Journal of Prosthetic Dentistry, 90: 228‐234, September 2003.

46. GH Johnson, X Lepe, TC Aw. Effect of surface moisture on detail reproduction of elastomeric impression materials. Journal of Prosthetic Dentistry, 90: 354‐364, October 2003.

47. GH Johnson, LR Hazelton, DJ Bales, X Lepe. The effect of a resin‐based sealer on crown retention for three types of cement. Journal of Prosthetic Dentistry, 91:428‐435, May 2004.

48. TC Aw, X Lepe, GH Johnson, L Mancl. One‐year clinical evaluation of an ethanol‐based and a solvent‐free dentin adhesive. American Journal of Dentistry, 17:451‐456, December 2004.

49. TC Aw, X Lepe, GH Johnson, LA Mancl. A three‐year clinical evaluation of two‐bottle versus one‐bottle dentin adhesives. J Am Dent Assoc, 136:311‐322, March 2005.

50. CPK Wadhwani, GH Johnson, X Lepe, AJ Raigrodski. Accuracy of newly formulated fast setting elastomeric impression materials. Journal of Prosthetic Dentistry, 93:530‐539, June 2005.

51. R. P. Palacios, G. H. Johnson, K. Phillips, A. J. Raigrodski. Retention of zirconium‐oxide ceramic crowns for three types of cement. Journal of Prosthetic Dentistry, 96:104‐114, August 2006.

52. G Ibarra, GH Johnson, W Geurtsen, MA Vargas. Microleakage of porcelain veneer restorations bonded to enamel and dentin with a new self‐adhesive resin‐based dental cement. Dental Materials 23(2):218‐25, Feb. 2007.


53. C.V. Farrell, G.H. Johnson, M.T. Oswald, R.D. Tucker: Effect of cement selection and finishing technique on marginal opening of cast gold inlays. Journal of Prosthetic Dentistry, 99:287‐292, April 2008.

54. AH Kang, GH.Johnson, X Lepe, JC Wataha. Accuracy of reformulated, fast set vinyl polysiloxane impression material using dual‐arch trays. Journal of Prosthetic Dentistry; 101:332‐341, May 2009.

55. GH Johnson, X Lepe, H Zhang, JC Wataha. “Retention of metal‐ceramic crowns with contemporary dental cements.” J Am Dent Assn, 2009;149;1125‐1136, Sep 2009.

56. G.H. Johnson, L.A. Mancl, E.R. Schwedhelm, D.R. Verhoef and X. Lepe. Clinical trial investigating success rates for polyether and vinyl polysiloxane impressions made with full‐arch and dual‐arch plastic trays. J Prosth Dent 103;23:13‐22, January 2010.

57. MH Kronström, GH Johnson, RW Hompesch. Accuracy of a generically new ring‐opening metathesis elastomeric dental impression material. J Prosth Dent 103;23:49‐53, January 2010.

58. T Stober, GH Johnson, M Schmitter. Accuracy of the newly formulated vinyl siloxanether elastomeric impression material. Journal of Prosthetic Dentistry, 103;228‐239, April 2010.

59. M Schmitter, GH Johnson, C Faggion, C Klose, G Mitov, F Nothdurft, P Pospiech, P Rammelsberg, B Ohlmann, S Schwarz, T Stober, P Schiller, M Pritsch. Clinical success rates for polyether crown impressions when mixed dynamically and statically. Clin Oral Invest, Epub 25 May 2011.

Publications ‐ Minor Journals 1. M.D. Ryan, J.M. Powers, and G.H. Johnson: Properties of glass ionomer luting cements. Michigan Dental Association

Journal 67:17‐ 19, January 1985. 2. G.H. Johnson and V.A. Merchant: How much is too much? Infection control for impressions. Synergy 1:20, Fall, 1988.

Also reprinted in Kent Dental, Summer 1989. 3. G.H. Johnson and T.M. Ponti: Viscoelasticity of soft acrylics. The Dental Advisor 5(4):6‐7, 1988. Accepted for Publication but not yet Published 1. Submitted for Publication but not yet Accepted 1. E. Leclercq, J. Brudvick, K. Phillips, G Johnson: Loss of retention of three plastic resilient attachments for Implant‐

retained mandibular overdentures during functional fatigue cycling, submitted to The International Journal of Prosthodontics, September 1998.

2. MV Lim, J. Brudvick, K. Phillips, G Johnson: Evaluation of opaquers for implant overdenture metal bases: microleakage testing and color analysis. Submitted to Journal of Prosthetic Dentistry, July 2000.

Manuscripts in Preparation 1. G.H. Johnson, M.H. Kronström, and J.S. Emerson, Effectiveness of simple cementation of zirconium‐oxide crowns; no

intaglio treatment. 2. G.H. Johnson, K. Shor and M.H. Kronström. Crown retention after long‐term specimen aging for self‐adhesive

modified‐resin cements. 3. GH. Johnson, X. Lepe, O. Schäfer, A. Patterson. Effectiveness of New Resin Cements in Retaining Lithium Disilicate

Crowns. Syllabi, Teaching Modules, and Other Written Teaching Materials 1. Glen H. Johnson and Jack I. Nicholls: Dental Materials Science, Restorative Dentistry 510P course syllabus, 1980‐

2004, University of Washington. 2. Jack I. Nicholls and Glen H. Johnson: Applied Dental Materials. Restorative Dentistry 511P course syllabus, Power

Point presentations, videos. 1981‐2004, University of Washington, 250 pages with illustrations; revised annually. 3. Glen H. Johnson: Applied Dental Materials. Restorative Dentistry 511P revised course syllabus, 2004‐present,

University of Washington, syllabus with illustrations; revised annually. 4. Glen H. Johnson, Editor, Restorative Dentistry Clinical Reference, a concise pocket clinical guide for faculty, part‐

time faculty, dental students and dental assistants. Published annually and distributed each fall to students, faculty, staff, and part‐time faculty. Accessible on side bar at http://www.dental.washington.edu/departments/restorative/clin_resource_info.php.

Audio Visual Materials 1. Power Point CDE presentations for nine current continuing dental education topics (all‐day course). 2. Power Point lecture sets for Restorative Dentistry 510, Dental Materials Science, that include dental amalgam,

bonding, cements, composite resin, compound, glass ionomer, gypsum, agar and alginate, elastomeric impression materials, liners, bases, mechanical properties, polymers, prosthetic resins, zinc oxide‐eugenol. Available at https://www.dental.washington.edu/intranet/onlinecourses.htm

3. Power Point lecture sets for Restorative Dentistry 511, Applied Dental Materials (lab), covering the practical aspects of handling of restorative dental materials.


4. Videos on website illustrating techniques for handling clinical dental materials. Available at https://www.dental.washington.edu/intranet/onlinecourses.htm

Presentations ‐ Major National and International Meetings 1. "Mechanical Properties of the Human Periodontal Ligament," invited guest lecturer, University of Zurich Dental

Institute, Division for Cariology, Periodontology, and Preventive Dentistry, Zurich, Switzerland, August 2, 1978. 2. Table Clinic: "Properties of Glass Ionomers Luting Cements," presentation at the Annual Meeting of the Academy of

Operative Dentistry, Chicago, IL, February 17‐18, 1983. 3. Paper No. 189, "Properties of Glass Ionomers Luting Cements," delivered at the Annual Session of the American

Association for Dental Research, Cincinnati, OH, March 17‐20, 1983. 4. Moderator, Dental Materials Teachers Conference, Morgantown, W. VA, November 7‐8, 1983. 5. Paper No. 959, "Accuracy of Addition Silicone Impression Materials as a Function of Technic," delivered at the Annual

Session of the International Association for Dental Research, Dallas, TX, March 15‐18, 1984. 6. "Accuracy of Elastomeric Impression Materials," presented at the Dental Materials Conference, Ann Arbor, MI,

October 2‐4, 1984. 7. Table Clinic: "Accuracy of Addition Silicone Impression Materials as a Function of Technic," annual meeting of the

Academy of Operative Dentistry, Chicago, IL, February 18‐19, 1985. 8. Paper No. 921, "A Laboratory Investigation of Two New Dental Amalgam Alloys," delivered at the Annual Session of

the International Association for Dental Research, Las Vegas, NV, March 21‐24, 1985. 9. Paper No. 42, "Static and Dynamic Properties of the Human Periodontal Ligament," delivered at the Annual Meeting

of the Society for Biomaterials, San Diego, CA, April 24‐28, 1985. 10. Regional AADR Meeting, presentation on "Static and Dynamic Properties of the Human Periodontal Ligament,"

University of British Columbia, Vancouver, B.C., Canada, November 14‐15, 1985. 11. Paper No. 787, "Post‐Operative Sensitivity of Various Direct Posterior Restorative Systems," delivered at the Annual

Session of the International Association for Dental Research, The Hague, Netherlands, June 26‐28, 1986. 12. Table Clinic: "Treatment of the Class V Lesion with Glass Ionomer," Sixteenth Annual Meeting of the Academy of

Operative Dentistry, Chicago, IL, February 12‐13, 1987. 13. Paper No. 1794, "Clinical Evaluation of Detail Reproduction of Elastomeric Impression Materials," delivered at the

65th General Session of the International Association for Dental Research, Chicago, IL, March 11‐15, 1987. 14. "Traditional and New Dental Restorative Materials for Posterior Teeth," Division of Continuing Dental Education,

Faculty of Dentistry, University of Alberta. Lecture covering clinical and dental research of new dental amalgam alloys. Red Deer, Alberta, April 25, 1987.

15. "Clinical Evaluation of Detail Reproduction of Elastomeric Impression Materials," invited Essayist, 69th Annual Meeting of the Academy of Denture Prosthetics, Monterey, CA, May 17‐22, 1987.

16. "Indisperse ‐ The Next Generation in Dental Amalgam?", Invited Essayist, Seventeenth Annual Meeting of the Academy of Operative Dentistry, February 18‐19, 1988, Chicago, IL

17. Paper No. 1354, "The Accuracy of Elastomeric Impressions Disinfected by Spray Atomization" delivered at the 66th General Session of the International Association for Dental Research, Montreal, Canada, March 9‐13, 1988.

18. "Current Advances in Esthetic Restorative Dentistry", invited featured clinician for Annual meeting of the Korean Academy of Esthetic Dentistry, Namseoul Hotel, Seoul, Korea, April 19 & 20, 1988

Additional presentations also given to: Faculty and students, Dankook University Dental College, Choong‐ nam, Korea, April 15, 1988. Dental faculty members and general practitioners, Crown Hotel, Pusan, Korea, April 16, 1988. Faculty and graduate students, College of Dentistry, Yonsei University, Seoul, Korea, April 20, 1988. Korean Academy of Conservative Dentistry, Ambassador Hotel, Seoul, Korea, April 21, 1988.

19. "The Accuracy and Efficacy of Disinfection by Spray Atomization on Elastomeric Impressions," invited Essayist for the Fifty‐Third Annual Meeting of the Pacific Coast Society of Prosthodontists, Sun River Resort, Sun River, OR, June 21‐24, 1988.

20. Chairman, ISO/TClO6 Working Group #10 session on Resilient Denture Lining Materials, 24th Plenary Meeting of the International Standards Organization Technical Committee 106, ADA Headquarters, Chicago, October 17‐18, 1988.

21. Paper No. 41, "Clinical Performance of Posterior Composite and Dental Amalgam after Three Years," delivered at the l8th Annual Session of the American Association for Dental Research, San Francisco, CA, March 15‐19, 1989.

22. Invited Guest Lecturer for the staff and residents of the USAF General Dental Residency Program, Wilford Hall Medical Center, Lackland Air Force Base, San Antonio, TX, October 23, 1989.

23. Paper No. 622, "Direct Clinical Comparison of Amalgam and Composite Restorations," delivered at the 69th General Session of the International Association for Dental Research, Acapulco, Mexico, April 17‐21, 1991.

24. "Sensitivity Associated with the Use of Glass Ionomer and Zinc Phosphate Cements for Crown Cementation," invited Essayist for the Fifty‐Sixth Annual Meeting of the Pacific Coast Society of Prosthodontists, Victoria Convention Center, Victoria, B.C., June 18‐21, 1991.

25. Verein zur Förderung der wissenschaftlichen Zahnheilkunde in Bayern e.V., (Bavarian Society for Research in Dental Science), invited speaker on "Sensitivity Associated with the Use of Glass Ionomer and Zinc Phosphate Cements for Crown Cementation." Munich, Germany, October 25, 1991.


26. Paper No. 1505, "Pulpal Sensitivity from Zinc Phosphate and Glass Ionomer Luting Cements following Crown Cementation," delivered at the 70th General Session of the International Association for Dental Research, Glasgow, Scotland, July 1‐4,1992.

27. "Pulpal Sensitivity from Zinc Phosphate and Glass Ionomer Luting Cements following Crown Cementation," invited Projected Clinic at the 63rd Annual Meeting of The American Academy of Restorative Dentistry, February 21, 1993, Chicago, Illinois.

28. "Clinical Dental Materials ‐ News, Views and Discussion", Invited speaker for the General Meeting of the Vancouver and District Dental Society. Half‐day program, November 9, 1993, Four Seasons Hotel, Vancouver, B.C., Canada.

29. “Does Zinc Phosphate or Glass Ionomer Cement Cause Pulpal Sensitivity?,” Invited Visiting Lecturer for the Faculty of Dentistry, University of Toronto, May 10, 1994, Toronto, Ontario, Canada.

30. “Posterior Composites,” Invited to give the Bruce Hord Memorial Lecture for students and faculty of the Faculty of Dentistry, University of Toronto, May 12, 1994, Toronto, Ontario, Canada.

31. “Evaluation and Control of Pulpal Sensitivity with Crown Preparation and Cementation”, Invited presenter at the Annual Session of the American College of Prosthodontists, October 19‐22, 1995, Washington D.C.

32. Paper #1918, “Crown Retention with Use of a Resin Sealer on Prepared Dentin,” presented at the 74th General Session of the International Association for Dental Research, March 13‐17, 1996, San Francisco, California.

33. “Design and Implementation of Multicenter Clinical Trials in Restorative Dentistry”, invited presenter for the University of Michigan, Oral Health Sciences Seminar Series, March 21, 1996, Ann Arbor, Michigan.

34. “Crown Preparation with the Use of Sealers on Prepared Dentin”, invited presenter for the Fourth Annual Meeting of the Canadian Academy of Restorative Dentistry and Prosthodontics, Four Seasons Hotel, September 27‐28, 1996, Vancouver, BC.

35. Paper #984, “Crown Retention with Use of a 5 % Glutaraldehyde Sealer on Prepared Dentin,” presented at the 75th General Session of the International Association for Dental Research, March 19‐23, 1997, Orlando, Florida.

36. Paper #1336, “Effect of Moisture on the Quality of Crown and Bridge Impressions,” presented at the 76th General Session of the International Association for Dental Research, June 24‐27, 1998, Nice, France.

37. “Will the Use of Sealers on Prepared Dentin Affect Crown Retention and Do They Reduce Post‐treatment Sensitivity?”, Invited presenter at the Annual Session of the American College of Prosthodontists, September 16‐19, 1998, San Diego, CA.

38. Paper #273, “Detail Reproduction for Single versus Dual Viscosity Impression Techniques,” presented at the 77th General Session of the International Association for Dental Research, March 10‐13, 1999, Vancouver, British Columbia, Canada.

39. Paper #2469, “Crown Retention for Two Resin‐Modified Glass Ionomer and Two Composite Resin Luting Cements” presented at the 81st General Session of the International Association for Dental Research, June 25‐28, 2003, Göteborg, Sweden.

40. “New Dental Adhesives and Luting Agents – Should you use them?,” Invited presenter at the Twelfth Annual Meeting of the Canadian Academy of Restorative Dentistry and Prosthodontics, October 14‐16, 2004, Banff Springs, Alberta, Canada.

41. Paper #0362, “Clinical Success Rates for Polyvinylsiloxane and Polyether Dual‐Viscosity Impressions” presented at the 83rd General Session of the International Association for Dental Research, March 9‐12, 2005, Baltimore, MD.

42. “New dental adhesives and cements. Should you use them?” Invited presenter at the RV Tucker Symposium on Current Topics in Restorative Dentistry, October 14‐15, 2005, Hyatt Regency, Vancouver, Canada.

43. “An Update on New Adhesives, New Luting Agents and Esthetic Direct Anterior Composites”, Invited presenter for an all‐day course sponsored by University of British Columbia International Dental Education, Sheraton Wall Center, Vancouver BC, May 6, 2006.

44. "New Luting Agents – What does the evidence show?," invited Essayist for the Seventy‐First Annual Meeting of the Pacific Coast Society for Prosthodontists, Portland Hilton, Portland, OR, June 21‐24, 2006.

45. “Restorative Dentistry Update – Should you adopt new materials and techniques?”, Invited presenter with Dr. John Townsend, for an all‐day course sponsored by McGill University Faculty of Dentistry, Montréal, Quebec, Sept. 15, 2006.

46. “New adhesives, luting agents and filling materials – What should you use, why and how?, Invited presenter for an all‐day course sponsored by the Calgary District and Dental Society, Calgary, Alberta, Oct. 13, 2006.

47. “Cement Retention and Cementation Procedures for Procera AllZirkon Crowns”, invited presentation of research study results, Gothenburg, Sweden, December 8, 2006.

48. “New Dental Adhesives and Luting Agents – should you use them?”, invited speaker for the Annual Meeting of The American Dental Society of Europe, Cameron House Hotel, Loch Lomond, Scotland, June 26‐29, 2007.

49. “New adhesives, luting agents and filling materials – What does the evidence show? Invited presenter for an all‐day course sponsored by the Edmonton District and Dental Society, Edomonton, Alberta, Oct. 19, 2007.

50. “Dental Materials Update”, invited speaker for the 58th Annual Meeting of The CAIC Seminar, Grand Hyatt Hotel, Seattle, WA, September 7‐11, 2007.

51. “New Adhesives and Cements ‐ What should you use and why? Invited all‐day speaker for the Faculty of Dentistry Symposium, Çukurova University, May 29‐30, 2009, Adana, Turkey.


52. “Contemporary Dental Cements – make the selection based on evidence”. A one hour presentation to the faculty and graduate students of the Department of Restoratrive Dentistry, Universidad Internacional de Catalunya, Campus Sant Cugat, April 20, 2009, Barcelona, Spain.

53. “New Dental Adhesives and Cements – What can you use? Why? When? Invited speakers for the Annual Scientific Meeting of the Canadian Academy for Restorative Dentistry and Prosthodontics (CARDP), Oct 14‐16, 2010, Calgary, Alberta, Canada.

54. “New Dental Cements – What are they, what can you use and why?”, Invited Program Speaker, the 42nd Annual Meeting of the American Collegew of Prosthodontists (ACP), Baltimore, MD, Oct 31‐Nov 3, 2012.

55. “Update for New Clinical Restorative Materials”, Quintagesimo Segundo Seminario Anual Del Circulo De Estudios Odontologicos De Guadalajara, June 19‐21, 2014, Hotel Real de Chapala, La Floresta, Ajijic, Jalisco, Mexico.

56. “Simplified Cementation of Lithium Disilicate Crowns: Recent Study Results for New Cements”, Invited presenter for the 79th Annual Meeting of the Pacific Coast Society for Prosthodontics, June 24‐27, 2014, Montage Laguna Beach, Laguna Beach, CA.

57. “New Dental Adhesives and Crown Cements – What should you use and why?”, invited speaker for the 2015 Annual meeting of the Canadian Academy of Restorative Dentistry and Prosthodontics, October 1‐3, 2015,Toronto, Ontario.

Presentations ‐ Regional or State Meetings 1. Update in Restorative Dentistry, University of Washington, School of Dentistry Continuing Dental Education

postgraduate course. Lectured on impression materials; cements, bases, and liners; and composite resin systems. Seattle, June 14‐15, 1984.

2. Second Annual Update in Restorative Dentistry, University of Washington School of Dentistry, Continuing Dental Education Postgraduate course. Lectured on placement of a posterior composite; dental amalgam, and on impression materials. Seattle, May 31‐June 1, 1985.

3. Third Annual Update in Restorative Dentistry, University of Washington School of Dentistry, Continuing Dental Education postgraduate course. Lectured on three topics: current concepts of bases and liners; visible light‐cured pulp capping material; and matrixing for posterior composites. Seattle, June 13‐14, 1986.

4. "Recent Advances with Dental Materials," Scientific Session of the Washington State Dental Association. Invited Lecturer for a Registered Clinic, Seattle, May 16, 1987.

5. Fourth Annual Update in Restorative Dentistry, University of Washington, School of Dentistry, Continuing Dental Education postgraduate course. Lectured on new dental amalgam alloys, glass‐ionomer restorative materials, and impression materials. Spokane, WA, May 29‐30, 1987.

6. "Clinical Restorative Dental Materials: News, Views, and Discussion." Invited speaker for an all‐day course, sponsored by the Benton‐Franklin County Dental Society, Kennewick, WA, March 18, 1988.

7. Fifth Annual Update in Restorative Dentistry, University of Washington, School of Dentistry, Continuing Dental Education postgraduate course. Presentations given for an update with dental amalgam alloys, dentin and enamel bonding agents, posterior composite resins, and vital bleaching. Children’s' Hospital, Seattle, WA, June 10 & 11, 1988.

8. "Clinical Uses of Glass Ionomer Products," Advanced Restorative Dentistry Seminar ‐ Gerard Schultz Study Club Reunion, University of Washington Continuing Dental Education, Sheraton Hotel, Seattle, WA, January 20‐21, 1989.

9. "An Update with Dental Amalgam, Composites, Dentin Adhesives, and Composites," Day‐long course for Academy of General Dentistry members, Oregon Health Sciences University Continuing Dental Education, Portland, OR, February 6, 1989.

10. "Update in Restorative Dentistry," Continuing Dental Education Postgraduate course; co‐sponsored by the Spokane District Dental Society and the University of Washington School of Dentistry. Presentations given on an update with dental amalgam alloys, anterior and posterior composite resins, glass ionomer, and impression materials‐‐products, trays, and disinfection. Spokane Convention Center, Spokane, WA, May 5‐6, 1989.

11. "Update in Restorative Dentistry," Continuing Dental Education Postgraduate course; sponsored by the University of Washington School of Dentistry. Presentations given on "What's New with Dental Amalgam," "Composite Resins for Anterior and Posterior Teeth," "What About the New Light Cured Glass Ionomers?", "Update with Impression Materials and their Disinfection." Hyatt Regency Hotel, Bellevue, WA, June 9‐10, 1989.

12. "Clinical Restorative Dental Materials," Continuing Dental Education postgraduate course; sponsored by the University of Nebraska Medical Center. All‐day lecture, Lincoln, NE, May 8, 1990.

13. "Seventh Annual Update in Restorative Dentistry," Continuing Dental Education postgraduate course; sponsored by the University of Washington School of Dentistry. Presentation given on glass‐ ionomer restorative materials. Children's Hospital, Seattle, WA, June 8‐9, 1990.

14. Oktoberfest '90, program sponsored by Burkhart Dental Supply. Presentation entitled "Evaluation and Use of Current Glass‐Ionomer Restorative Products." Bellevue Concourse, Bellevue, WA. October 12, 1990.

15. Washington and B.C. Sections of the International College of Dentists, invited presenter on "Glass Ionomers for Today's Practice and Microetching Techniques for Esthetics". Seattle, November 30, 1990.

16. Prince George Dental Society, invited speaker on "Update with Selected Restorative Dental Materials". Prince George, British Columbia, Canada, February 3, 1991.


17. Augsburg and Nürnberg Dental Command, U.S. Army, All day CDE course entitled "Update on Clinical Restorative Dental Materials and Techniques", Augsburg, Germany, March 21, 1992.

18. 464th Medical Detachment, U.S. Army Dental Service, All day CDE course entitled "Recent Advances with Clinical Dental Materials", Kaiserslautern, Germany, May 20, 1992.

19. Course Director and presenter for the Department of Restorative Dentistry CDE course entitled "Improving Clinical Performance with Restorative Treatment and Related Therapies." All day course held in Bellevue, Washington, May 14, 1993.

20. "Clinical Dental Materials ‐ News, Views and Discussion", all‐day presentation at the Annual Scientific Session of the Washington State Dental Association, Seattle, July 15, 1993.

21. Washington and B.C. Sections of the American College of Dentists and Pierre Fauchard Academy, invited presenter on "New Systems for Restoring the Class 5 Lesion." Seattle, November 19, 1993.

22. Clinical Restorative Dental Materials: News, Recommendations, and Clinical Techniques.” All‐day University of Washington Continuing Dental Education course held in Honolulu, Hawaii, February 17, 1994.

23. " Update in Restorative Dentistry," Continuing Dental Education postgraduate course; sponsored by the University of Washington School of Dentistry. Presentation given entitled “Selection and Uses of the New Photo‐Initiated Glass Ionomer/Resin Systems and Multi‐Purpose Dental Adhesives.” Embassy Suites Hotel, Seattle, WA, April 29‐30, 1994

24. “Clinical Restorative Dental Materials: News, Recommendations, and Clinical Techniques.” All‐day continuing dental education course given to dental staff and practitioners at the Faculty of Dentistry Building in Toronto, Ontario, Canada, May 13, 1994.

25. “Clinical Restorative Dental Materials: News, Recommendations, and Clinical Techniques.” All‐day University of Washington Continuing Dental Education course held at Providence Hospital, Anchorage, Alaska, September 23, 1994.

26. “Clinical Restorative Dental Materials: News, Recommendations, and Clinical Techniques.” All‐day University of Louisville Continuing Dental Education course held at the School of Dentistry, Louisville, Kentucky, May 4, 1995.

27. “Sun Valley ‐ Ski and Learn: Update in Clinical Restorative Dentistry”, CDE Course (6 hours) sponsored by the Seattle‐King County Dental Society at Sun Valley Lodge, Sun Valley, Idaho. February 2‐3, 1996.

28. “Update for Dental Hygienists: Use of Multi‐Purpose Adhesives and Restoration of the Class V lesion”, University of Washington Continuing Dental Education course held at the Museum of Science and Industry, Seattle, WA, February 9, 1996.

29. “Restorative Dentistry Update: News, Recommendations, and Clinical Techniques.” All‐day University of Washington Continuing Dental Education course held at the Doubletree Paradise Valley Resort, Scottsdale, AZ, February 16, 1996.

30. “Restorative Dentistry Update: News, Recommendations, and Clinical Techniques.” All‐day course at the Spring Scientific Session of the California Dental Association, Anaheim Convention Center, Anaheim, CA, April 12, 1996.

31. “Update in Restorative Dentistry," Continuing Dental Education postgraduate course; sponsored by the University of Washington School of Dentistry. Presentation given entitled “Sealing Prepared Teeth and Alternatives for the Class V Lesion,” Overlake Hospital Education Center, Bellevue, WA, April 25, 1997.

32. “Dental Adhesives and Sealing Prepared Teeth.” Invited presenter at the General Meeting and Scientific Conference of the Alberta Dental Association, Jasper, Alberta, May 29‐June 1, 1997.

33. “The Past, Current and Future of Dental Biomaterials.” Continuing Dental Education course sponsored by the University of Michigan and the Kingery Club. One of three presenters with a presentation entitled “Clinical Evaluation of Current Dental Biomaterials.” Traverse City, Michigan, June 6‐7, 1997.

34. “Bonding, Sealing and Restoring Teeth: News, recommendations and clinical techniques.” Invited presenter at the Scientific Program of the Victoria and District Dental Society, Victoria, British Columbia, Feb. 2, 1998.

35. “Update with Pulp Capping and Sealing Prepared Teeth”, Presentation to the Mt. Baker Dental Society, Mt. Vernon, WA, May 12, 1998.

36. “Bonding, Sealing and Restoring Teeth: News, recommendations and clinical techniques.” Invited all‐day speaker for the SEA MAR Community Health Centers Annual CDE Program, Seattle, WA, Nov. 21, 1998.

37. “Bonding, Sealing and Restoring Teeth: News, recommendations and clinical techniques.” Featured presenter for the Roy B. Harrell Symposium, University of North Carolina Dental Alumni Annual CDE Program, Chapel Hill, North Carolina, April 10, 1999.

38. “Bonding, Sealing and Restoring Teeth: News, recommendations and clinical techniques.” All‐day CDE course given to the members and their staff of the Benton‐Franklin County Dental Societies, May 21,1 999, Richland, WA.

39. Invited Lecturer for the staff, residents and operative course participants of the USAF General Dental Residency Program, Wilford Hall Medical Center, Lackland Air Force Base, San Antonio, TX, April 15, 1999.

40. “Contemporary Clinical and Laboratory Research on Dental Cements.” Invited speaker for the 3rd Annual Restorative Symposium: Current Controversies in Restorative Dentistry; Univ. of Southern California, Los Angeles, June 11‐12, 1999.

41. “Update em Adhesivos e Materiais Restauradores”, Invited speaker for an all‐day continuing dental education course sponsored by the Departmento de Biomateriais at the Faculdade de Medicina Dentária, Universidade de Lisboa and Sociedade Portuguesa de Estomatologia e Medicina Dentária, Saturday, June 23, 2001, Lisbon, Portugal.


42. “Update with bonding agents, pulp capping, & luting agents” Half‐day CDE course given to the members and their staff of the Orange County Dental Society, Nov. 13, 2002, Orange, CA.

43. “New Luting Agents and Materials – Should you use them?”, Univ. Washington School of Dentistry CDE presentation, January 30, 2004, Seattle, WA.

44. “Restorative Dental Materials Update – New, Recommendations, and Clinical Techniques,” Half‐day continuing dental education course for members of Gnatholgy Northwest, April 2, 2004, Portland, Oregon.

45. “New Adhesives, Luting Agents and Filling Materials “, all‐day presentation to the International Dental Study Club, Oct 21‐22, 2005, Marriot Hotel, Toronto, Canada.

46. “New Dental Materials – What you should use and why?”, all‐day presentation to the members of the Kamloops and District Dental Society, Feb 11, 2006, Forster’s Convention Center, Kamloops, BC, Canada.

47. “New Adhesives, Luting Agents and Filling Materials “, all‐day presentation to the Upper Island District and Dental Society, April 13, 2007, Mt. Washington, Vancouver Island, British Columbia, Canada.

48. “New Adhesives, Luting Agents and Filling Materials “, all‐day presentation for University of California San Francisco Continuing Dental Education, April 13, 2007, San Francisco, CA.

49. “Dental Materials Update”, invited speaker for the Vancouver Study Club, Sutton Place Hotel, Vancouver BC Canada, November 2, 2007.

50. “New Adhesives, Luting Agents and Filling Materials – what should you use and why”, all‐day presentation for the Monterey Bay Dental Society, April 18, 2008, Embassy Suites Hotel, Monterey, CA.

51. “New Adhesives, Luting Agents and Filling Materials – what should you use and why”, one and one‐half days of day presentation at the Midwest Dental Conference, March 28‐29, 2009, Hyatt Regency, Kansas City, MO.

52. “New Dental Adhesives and Luting Agents – what should you use and why,” 2011 Cantwell Annual Lecture for the Oregon Health Sciences University Dental and Hygiene Alumni, Vey Auditorium, Dornbecher Hospital, September 24, 2011.

53. “New Luting Agents – What can you use and why?,” Evening lecture for the Snohomish County Dental Society, Mill Creek Country Club, Mill Creek, WA, October 19, 2011.

54. New Dental Adhesives and Luting Agents – What can you use and why?,” Evening lecture for the Benton‐Franklin Counties Dental Society, Marriot Event Center, Richland, WA, October 20, 2011.

55. “New Dental Adhesives and Luting Agents”, all‐day presentation for University of California San Francisco Continuing Dental Education, April 27, 2012, San Francisco, CA.

Presentations ‐ Small Group 1. "Mechanical Properties of the Human Periodontal Ligament," Thesis presentation, University of Washington,

Department of Mechanical Engineering, Nov 8, 1977. 2. "Mechanical Properties of the Human Periodontal Ligament," University of Washington Center for Bioengineering

Seminar, May 9, 1978. 3. "Mechanical Properties of the Human Periodontal Ligament," University of Washington, Department of Periodontics

Graduate Seminar, Spring 1978. 4. "Establishing a Private Dental Practice," Senior Dental Practice Management Seminar, University of Washington,

School of Dentistry, May 1, 1981. 5. "Mechanical Properties of the Human Periodontal Ligament," University of Michigan, Department of Dental

Materials, Seminar, Winter 1982. 6. Table Clinic: "Properties of Glass Ionomers Luting Cements," University of Michigan Annual Table Clinic Program,

March 1982. 7. Moderator, Regional AADR Meeting, Seattle, WA, November 9, 1984. 8. "Recent Advances in Impression Materials," presented at the quarterly Meeting of the Northwest Prosthodontic

Society, Seattle, WA, April 12, 1985. 9. "Update in Dental Materials," delivered at the meeting of the Thurston County Dental Society, May 17, 1986. 10. "Clinical Research with Restorative Dental Materials," University of Washington, School of Dentistry, Research

Colloquia, May 20, 1986. 11. "Update on Products and Materials for Clinical Dentistry," Bolender Prosthodontic Seminar, Seattle, April 27, 1987. 12. "Dental Materials," Breakfast with the Experts, Scientific Session of the Washington State Dental Association, Seattle,

May 15, 1987. 13. "Posterior Composites," lecture for Residents of the General Practice Residency Program, School of Dentistry,

University of Washington, Seattle, August 27, 1987. 14. "Glass Ionomer Restorative Materials," lecture for Residents of General Practice Residency Program, School of

Washington, School of Dentistry, Seattle, September 10, 1987. 15. "An Update on New Dental Materials," speaker at the Vancouver Prosthodontic Research Institute, Vancouver, B.C.,

Oct 9, 1987. 16. "Update with Posterior Composites and Impression Materials," speaker, Seattle Continuing Dental Education

Seminar, Seattle, November 5, 1987. 17. "Materials and Techniques for Posterior Composite Restorations," speaker, Interlake Dental Study Club, Bellevue,

November 18, 1987.


18. "Disinfection of Impressions," invited speaker for the Meeting of the Washington State Society of Prosthodontists, November 20, 1987.

19. "Selection and Use of Glass Ionomer Cements, Bases, Liners, and Filling Materials," speaker, Interlake Dental Study Club, Bellevue, January, 20, 1988.

20. "Update with Glass Ionomers and Dental Amalgam," speaker, Seattle Continuing Dental Education Seminar, Seattle, February 4, 1988.

21. "A Trip Inside the Mouth", presentation to sixth grade students, View Ridge Elementary School, Seattle, Washington, May 13, 1988.

22. "What's New with Impression Materials?", invited speaker for the Dental Technicians Association of Washington, University Plaza Hotel, May 18, 1988.

23. "Update with Glass Ionomers and Posterior Composites," guest presenter for the Alpine Dental Seminar, Bellevue, Washington, June 16, 1988.

24. "Adhesive Bonding," speaker for the meeting of the Kitsap County Dental Society, Kitsap County Golf and Country Club, Bremerton, Washington, September 13, 1988.

25. "Infection Control in the Dental Laboratory," guest speaker for the meeting of the Dental Technology Association of Washington, University Plaza Hotel, September 21, 1988.

26. "Labial Veneering and Tooth‐colored Inlays," invited speaker for the Seattle Continuing Education Seminar, Seattle, Washington, November 3, 1988.

27. "Recent Advances with Impression Materials, Dental Amalgam, Posterior Composites, and Glass Ionomer Products," invited speaker for the annual day‐long course for the Cast Restoration Seminar, Bellevue, Washington, December 20, 1988.

28. "A Review of the Uses of Glass Ionomer Restorative Materials," Totem North Study Club, Bellevue, Washington, January, 17, 1989.

29. "Porcelain Repair, Cementation of Veneers, and Adhesive Bonding," invited speaker for the Seattle Continuing Education Seminar, Seattle, Washington, March 2, 1989.

30. "Glass Ionomers, Dentin Adhesives, and Porcelain Repair," speaker for the Vancouver Prosthodontic Research Institute, Vancouver, B.C., April 14, 1989.

31. "Update on Adhesive Restorative Materials," invited speaker for the Eastside Specialty Study Club, November 13, 1990.

32. "Treatment of Cervical Caries with Glass Ionomer," speaker for the Department of Prosthodontics quarterly faculty meeting, January 17, 1990.

33. "Dentin Adhesives," invited speaker for the Alpine Dental Study Club, Bellevue, WA, May 17, 1990. 34. "Removal of Surface Defects Using Microabrasion," invited speaker for the Annual Scientific Program of the Edward

H. Angle Society of Orthodontics, Olympic Hotel, Seattle, WA, June 2, 1990. 35. "Dentin Adhesives and Microabrasion Techniques," invited speaker for the Eastside Dental Study Group, Bellevue,

WA, September 13, 1990. 36. "Restorative Materials ‐ An Update", invited speaker for the Yakima Prosthodontic Seminar, mentor Dr. Charles

Bolender, Yakima, Washington, March 8, 1991. 37. "Control of Sensitivity with the Use of Glass Ionomer Cement", seminar for Poliklinik für Zahnärztliche Prothetik,

University of Munich, June 12, 1992. 38. "Assessment of the New Multipurpose Dental Adhesive systems," Eastside Diagnosis and Treatment Planning

Seminar, Kirkland, WA, December 3, 1992. 39. "New Developments with Dentin Bonding & Glass Ionomer Restorative Materials," 9th Annual Roundtable Evening,

Seattle‐King County Dental Society, December 8, 1992. 40. "Design, Control, and Analysis of a Practitioner‐Based Clinical Trial", Faculty and Graduate Student Seminar of the

Department of Dental Public Health Sciences, January 25, 1993. 41. "Update in Restorative Materials," invited speaker for the Meeting of the Washington State Society of

Prosthodontists, November 18, 1994. 56. "Bonding Dental Amalgams and Treating Dentin After Crown Preparation," leader for Seattle‐King County Dental

Society Annual Roundtable Evening, January 10, 1995. 57. "Update in Restorative Materials," invited speaker for the Seattle Continuing Education Seminar, Seattle,

Washington, May 1, 1995. 58. “Evaluation and Control of Pulpal Sensitivity with Crown Preparation and Cementation.” Presentation to the West

Virginia Restorative Dentistry Study Club, Morgantown, West Virginia, September 25, 1995. 59. "Update in Restorative Dentistry," invited all‐day speaker for the Okanagan Valley Study Club, Okanagan, WA,

March 1, 1996. 60. "Dental Adhesives ‐ Their Multiple Uses”, invited evening speaker for Evergreen Dental Seminars, Bellevue Athletic

Club, Bellevue, WA, February 11, 1997. 61. “Dental Bonding and Sealing ‐ How well does it work?”. Invited speaker for the monthly meeting of the South Puget

Sound Dental Study Club, Lacey, Washington, May 1, 1997. 62. “Restorative Materials Update,” Invited speaker for the Puget Sound Continuing Dental Education Group, Seattle,

Washington, October 6, 1997.


63. “Cements, Sealers and Compomers,” Invited speaker for the Dental Diagnosis and Treatment Planning Study Club, Kirkland, Washington, November 6, 1997.

64. “Restorative Materials Update,” Invited speaker for the Eastside Treatment Planning Seminar, Bellevue, Washington, January 26, 1999.

65. “Restorative Materials Update,” Invited speaker for the Seattle Comprehensive Study Group, Seattle, Washington, January 28, 1999.

66. “Pulp Capping, Sealing and Restoring Teeth,” Invited speaker for the Bolender Prosthodontic Study Club, Seattle, Washington, September 29, 1999.

67. “Pulp Capping and Sealing Teeth,” Invited speaker for the Puget Sound CDE Study Group, Seattle, Washington, October 4, 1999.

68. “Repairing Teeth with Novel Dental Materials,” Invited speaker for the Society for the Advancement of Material and Process Engineering, Seattle, WA, April 23, 2002.

69. “New luting agents and dental adhesives,” Invited speaker for the Greater Seattle Study Club, Bellevue, Washington, January 13, 2003.

70. “New Products for Clinical Dentistry,” Invited speaker for the Eastside Treatment Planning Seminar, Bellevue, WA, January 28, 2003.

71. “Thinking about choosing a new luting agent or adhesive?”, Invited speaker for the Puget Sound Dental Study Group, Kenmore, WA, February 3, 2003.

72. “Bonding, Luting and Core Materials ‐ An update”, Invited speaker for the Thurston‐Mason County Dental Society, Olympia, WA, April 23, 2003.

73. “What’s new with Restorative Dental Materials”, two‐day course for the Bruna Dental Seminar, Leavenworth, WA, June 27‐28, 2004.

74. “New luting agents and dental adhesives – what to use?”, Invited speaker for the Alpine Dental Seminar, Bellevue, WA, October 27, 2004.

75. “New Dental Cements – Evaluation and Selection”, invited speaker for the Washington State Society of Prosthodontists, Fairmont Olympic Hotel, November 17, 2005.

76. “Dental Adhesives ‐ What’s out there, what do we know and what should you use?”, invited speaker for the Lower Columbia Dental Society, Longview, WA, January 10, 2005.

77. “Update with Adhesives and Luting Agents”, invited speaker for a joint meeting of the Eastside Dental Seminar and the Eastside Dental Treatment Planning Seminar, Bellevue Club, Jan. 26, 2006.

78. “Restorative Materials Update”, invited speaker for the Comprehensive Dental Care Study Group, May 12, 2006, Seattle.

79. “New Luting Agents – Should you use them?”, Invited speaker for Federal way area dentists under sponsorship of Dr. Terry Wallin. Twin Lakes Golf and Country Club, Nov. 9, 2006.

80. “Update with Restorative Dental Materials, Invited speaker for the Thurston‐Mason County Dental Society, Nov. 15, 2006.

81. “Self‐etching Adhesives – Should you use them?”, invited speaker for the Eastside Dental Treatment Planning Seminar, April 26, 2007, Bellevue, WA.

82. “New Self‐Adhesive Cements – Should you use them?”, invited speaker for the Eastside Prosthetic Study Club, May 3, 2007, Bellevue, WA.

83. “Update with Clinical Dental Materials”, invited speaker for the Charles Stuart Study Club, May 10, 2008, Laguna Hills, CA.

84. “Update with Dental Adhesives and Cements”, invited speaker for the Alpine Dental Seminars, May 17, 2007, Bellevue, WA

85. "Dental Cements Update," speaker, Interlake Dental Study Club, May 21, 2008, Bellevue, WA. 86. “Restorative Dentistry – Update with Dental Bonding”, invited speaker for the Portland Area Dental Chiefs Meeting

of the Indian Health Board, July 9, 2008, Suquamish, WA. 87. “New Luting Agents – What does the evidence show?”, invited presenter for the 21st Annual CDE Day of the Tri‐

Colleges of American College of Dentists, International College of Dentists and Pierre Fauchard Academy, March 5, 2010, Washington Athlectic Club, Seattle, WA.

88. “What’s new with adhesives and cements?”, invited speaker for the Yakima Prosthodontic Seminar, March 11, 2010, Yakima, WA.

89. “New Cements – What to use. Why? When?” Invited speaker for the Eastside Treatment Planning Seminar, Bellevue, Washington, October 28, 2010.

90. “Choosing Your Dental Adhesive and Luting Agent – What does the evidence show?”, Invited speaker for the Interlake Dental Seminar, Bellevue, WA, January 12, 2011.

91. “Update for Self‐Etching Dental Adhesives and Self‐Adhesive Cements”, Invited speaker for Residents of the Swedish Medical Center GPR program, Seattle, January 13, 2011.

92. “What’s New with Dental Cements”, Invited speaker for Residents of the Swedish Medical Center GPR program, Seattle, January 9, 2012.

93. “Cements and Cementation”, invited speaker to the RV Tucker Study Club, Seattle, Dec. 21, 2011. 94. “ New Dental Adhesives – Should you use them? When?”, invited speaker for the Dental Diagnosis and Treatment

Planning Study Club, Bellevue, December 6, 2012.


95. “What’s New with Dental Adhesives”, Invited speaker for Residents of the Swedish Medical Center GPR program, Seattle, Feb. 11, 2013.

96. “New Adhesives – Should you use them?” Invited speaker for the Eastside Treatment Planning Seminar, Bellevue, Washington, October 24, 2013.

97. “The Latest Developments with Dental Adhesives and Cements”, Invited speaker for the Benton Franklin County Dental Society, May 15, 2014, Anthony’s Banquet and Event Center, Richland, WA.

98. “Promising New Dental Adhesives and New Cements/Adhesives for Cementation of Lithium Disilicate Crowns (e.max)”, invited speaker for the Alpine Dental Seminars, September 18, 2014, Bellevue, WA

99. “New Bonding Agents and Cements: Should you use them?” Invited speaker for the South Shore Study Club, March 26, 2015, Renton, WA.

100. “New Universal Adhesives and Cements. Should you use them?” Invited speaker for the meeting of the Washington State Society for Prosthondontics, April 16, 2015, Fairmont Olympic Hotel, Seattle, WA.

101. “New Dental Adhesives and Crown Cements – What should you use and why?, Invited speaker for the Academy for Excellence in Dentistry, October 12, 2015, Burbank, CA.

Major Teaching Responsibilities 1980‐2006 Restorative Dentistry 510 (Dental Materials Science). 3 credit hours, winter and spring. Co‐director with

50% responsibility for development of this course and for lecturing to first‐year dental students. Course responsibility also included delivery of course materials to Regional Dental Education Program (RDEP) satellite dental school sites in Utah and Idaho from 1980‐83.

2006‐present Restorative Dentistry 510 (Dental Materials Science). 3 credit hours, winter and spring. Provide half of

the dental materials science lectures to 1st year students; course directorship transferred to Dr. Chung. 1981‐2006 Restorative Dentistry 511 (Applied Dental Materials) 3 credit hours, spring. Co‐director with 50%

responsibility for development of this course and for lecturing and laboratory leadership to first‐year dental students. Course responsibility also included delivery of course materials to satellite (RDEP) dental school sites in Utah and Idaho from 1980‐83.

2006‐present Restorative Dentistry 511 (Applied Dental Materials) 3 credit hours, spring. Assumed course

directorship with 100% responsibility for lab course development and management with the retirement of Dr. Nicholls.

1998‐present Restorative Dentistry 620 (Intro to Clinical Restorative Dentistry), 3 credits, Summer. Supervision of

patient treatment planning with second‐year dental students. 1981‐present Restorative Dentistry 630 and 640 (Clinical Restorative Dentistry). 3 credit hours, fall, winter, spring.

Responsible for clinical supervision and instruction of third‐ and fourth‐year dental students. 1985‐1991 Restorative Dentistry 530, 531, 532 (Restorative Dentistry Clinical Topics) 2 credit hours for each

course. Course director with complete responsibility to give and arrange lectures for this third‐year dental student didactic course dealing with special topics in clinical restorative dentistry.

1992‐present Restorative Dentistry 530 and 620 (Restorative Dentistry Clinical Topics), 2 credit hours, fall. Provide six

hours of clinically‐oriented lectures to third year students, covering most topics in the Restorative Dentistry Clinical Reference pocket‐guide.

1986‐2006 Restorative Dentistry 585 (Advanced Dental Materials Science), 2 credits, winter. Co‐Director with 50%

responsibility for course development and for leading lectures/seminars in this Graduate Prosthodontics course.

2006‐present Restorative Dentistry 585 (Advanced Dental Materials Science), 2 credits, winter. Supply 50% of the

lectures/seminars in this Graduate Prosthodontics course. 2006‐present Restorative Dentistry 542 (New Developments in Dental Materials), 1 credit senior course, spring.

Director with 100% responsibility for course development and organization for leading this senior course. Gives 5 of 10 lectures.

Other Teaching Responsibilities 1977‐1978 Prosthodontics 460A and 461A (currently 620P and 621P). Clinical Instructor (20% time) in Complete

Denture Prosthodontics (Honors Prosthodontics).


1978‐1980 Prosthodontics 470A and 471A (currently 525P and 630P). Clinical Instructor (20% time) in Removable Partial Denture Prosthodontics.

1984 Restorative Dentistry 519P. 4 credit hours. A preclinical course in Operative Dentistry. A laboratory

instructor one day per week. 1983‐1984 Restorative Dentistry 520P, 521P, 522P. 2, 3, and 4 credit hours, respectively. A preclinical course in

Operative Dentistry Technique. A laboratory instructor one day per week for all three courses. 1984‐1985 Restorative Dentistry 525P, 526P, 527P. 3 credit hours for each consecutive course. A preclinical course

in Crown and Bridge Fixed Prosthodontics. A laboratory instructor one day per week. 1984‐1985 Bioengineering 299. One lecture each quarter on "Biomechanics in Dentistry." 1986 Dental Medicine 511 (Ethics), Small Group Facilitator. 1993‐1999 Restorative Dentistry 523, Introduction to Operative Dentistry, Laboratory Instructor for this final

preclinical course dealing with complex amalgam restorations. 1993‐present Hospital Dentistry Seminar, presentation of information to Residents on current clinical restorative

dental materials. 1999‐2001 Graduate Pediatric Dentistry Seminar, presentation of information to Residents on current clinical

restorative dental materials. 2000‐present Restorative Dentistry 570 (Graduate Prosthodontics Literature Review). Lead a seminar during fall

quarter covering ‘Applied statistics for Restorative Dentistry and Prosthodontics.’ Administration and/or Dental School Responsibility and Service University Service UW Freshman NCAA Intercollegiate Basketball, 1963‐64 University Committee on University Relations, 1966‐67 University of Washington Board of Control, 1966‐67 University of Washington Faculty Council on Retirement, Insurance & Benefits, 2002‐2005 University of Washington Faculty Senate, 1997‐1999; 2004‐2008 School of Dentistry Responsibility and Service Vertical Group Faculty Advisor, 1980‐1981 Health Sciences Open House Participant, 1981 Member of the Student Appeals Committee, 1983‐1987 Research Advisory Committee, 1984‐1991 Career Day Participant, Spring 1984 Member of the Advisory Committee of the General Clinical Research Center and Proposed Chief of Restorative Dentistry

and Materials Science Division, 1985 Discussion Leader, Freshman Retreat, Fort Worden, September, 1986 Member of the Strategic Planning Team (PEW Grant), 1985‐1987 Chair, Strategic Planning Task Force: Potential Applications of Advanced Technology in Dental Education and Care Delivery, Summer, 1987 Member, ad hoc Committee to Review Research in the School of Dentistry, 1987‐1988 Member, Core Clinical Research Center Advisory Committee for NIH/NIDR Grant, 1990 Member, Scientific Review Committee, Regional Clinical Dental Research Center, 1990‐97 Member, Task Force on Institutional Review and Planning, 1992‐ 1994 Chair, Task Force Subcommittee on Clinical Sciences, 1992‐ 1994 Member, Subcommittee on Competency and Outcomes Assessment , 1993‐1994 Member, Curriculum Committee, 1994‐1996 Member, Appointment, Promotion, and Tenure Committee, 1994‐1997, 2009‐2012 Member, School of Dentistry Faculty Council, 1997‐1999 Chair, Ad hoc Space Committee, Sep‐Dec 2007 Member, Instructional Resources Committee, 2009‐2012


Departmental Responsibility and Service Established the Restorative Clinical Research Center, 1983 Director of Clinical Research, 1983‐1993 Member of the Executive Committee, 1985‐1992 Faculty Development Coordinator, 1987‐1993 Member, ad hoc Committee for Space Utilization, 1992‐1993 Director, Division of Dental Materials Science, 1993‐present Chair, Faculty Search Committee, 2004‐2005 Acting Chair of Dept of Restorative Dentistry, July 1, 2006‐ December 31, 2007 Ad hoc Committee for Managing Budget Reductions, Fall 2010 Community Service Member of the Advisory Board for the South Puget Sound Community College Dental Assistant Program, 1979‐81 Member of Rotary International and Chairman of the International Student Exchange Committee, 1979‐1983 Youth Basketball & Baseball Coach, Parks and Recreation Dept, City of Seattle, 1984‐1988 Head Start Dental Service Program, 1985‐86 Deacon, University Lutheran Church, 1986‐1995 Delegate, Northern Washington Lutheran Synod, 1997 Board Member, Lutheran Campus Council, 1988‐1990 Planning Committee, Finnfest '89, National Finnish Festival, Univ of Washington Campus, July 13‐16, 1989. Planning Committee, Finnish‐American Festival, Naselle, WA, 1990, 1992 Troop 186 Program Coordinator, Seattle Council, Boy Scouts of America, 1993‐1994 Troop 186 Treasurer, Seattle Council, Boy Scouts of America, 1994‐1997 Planning Committee, Finnfest '99, National Finnish‐American Festival, University of Washington, July, 1999. Judge, Shoreline School District Science Fair, May 1997, May 1998 Teen Shelter Volunteer for U District Youth, 1995‐2005

GH Johnson (O

Dr. Johnson h(1968), a MasDental SurgerMaster of Scie(1983). Dr. Department oresearch focurestorative dein peer‐revieprofessional mand outside N Dr. Johnson iAssociation foof the ADA CoJournal of ProsConsultant to

Dr. Johnson isthe Columbia Washington w Dr. Johnson ischildren, all ofand the Univemiddle child Bat the UniversUniversity. Hclassical music Address: Glen H. JohnUniversity ofDepartment Box 357456 Seattle, WA 9

October 14, 201

holds a Bachelster of Sciencry degree (197ence degree inJohnson is P

of Restorative us remains wntal materials ewed journalsmeetings and orth America t

is a member or Dental Reseaouncil on Dentsthetic Dentistthe ADA Coun

s a native of WRiver. He a

where he playe

s married to Sf whom graduaersity of OregoBjorn earned asity of MichiganHe, his wife anc, hiking, skiing

son, DDS, MS f Washington of Restorative

98195‐7456 U

15)

lor of Science ce degree in B78), all from th Dental MaterProfessor andDentistry at

with laboratoryand techniques, is a frequhas held contthroughout his

of the Amerarch and the Ptal Materials, Itry. He is presecil on Scientific

Washington Stattended publid freshman int

usan, a retiredated from Roon Law School. n undergraduan. He, his wifend two young g, fishing, and t

Dentistry

USA

Glen H. Joh

BIOGRA

degree in MeBioengineeringhe University orials from the U served as Ithe Universityy and clinicaes. He has autuent presentetinuing dental s career.

ican Dental Aacific Coast Sonstruments, aently a membec Affairs and is

PERSONA

te, hailing fromc schools in Ntercollegiate b

d reading specosevelt High Sc She and her hate degree froe and two girlsboys also res

time away from

hnson, D.D.S

APHICAL SKET

echanical Engig (1977), a Doof WashingtonUniversity of Mnterim Chair y of Washingtl evaluation hored over 60er at scientifeducation cou

Association, thociety for Prostnd Equipmenter of the Boards a past Secreta

AL INFORMAT

m the Finnish‐Naselle and Saasketball and w

cialist for the Lchool in Seattlehusband have m Duke Unive reside in Seatside in Seattlem the city in hi

VoiceTel: FAX: e‐mahttp:

S., M.S.

TCH

ineering octor of n; and a Michigan of the

ton. His of new 0 articles fic and urses in

he Academy othodontics. Drt and served ad of Directors oary of the Pacif

TION

‐American comalem, Oregonwas a member

Lake Washingte. Erika is a gtwo children a

ersity and compttle. Their youe. Dr. Johnsos hometown o

e/e‐mail: (206) 543‐59 (206) 543‐77ail: gjohnson@://www.dental

of Operative r. Johnson is a as the Biomateof the Journal ofic Coast Socie

mmunity of Na, before attenr of the Board

ton School Disraduate of Pacand reside in Ppleted a combngest, Lars, is n’s personal iof Naselle in So

948 783 uw.edu l.washington.e

Dentistry, Intepast member erials Consultaof Prosthetic Dty for Prosthod

selle near the nding the Uniof Control.

strict. They hcific Lutheran UPortland, Oregbined law/MBAalso a graduatnterests incluouthwest Wash

edu/

Page 23

ernational and Chair nt for the entistry, a dontics.

mouth of versity of

have three University gon. Their A program te of Duke de travel, hington.

Documents

GH Johnson (October 14, 2015) Page 1dental.washington.edu/wp-content/media/restorative/GHJohnsonCV-… · GH Johnson (October 14, 2015) Page 2 George Ellsperman Gold Foil Study Club;