18
1 Getting Started Download the PDF manual and printer driver (=2) Register your product online (=18) Make sure you read this guide, including the “Safety Precautions” (=3) section, before using the printer. Reading this guide will help you learn to use the printer properly. Store this guide safely so that you can use it in the future. ENGLISH CEL-SW2FA210

Getting Started - CNET Content Solutionscdn.cnetcontent.com/3a/fa/3afafb14-9bf6-4f13-85b3-3b6cac536d33.pdf · Getting Started • Download the PDF ... • For information on printer

  • Upload
    vonga

  • View
    244

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Getting Started - CNET Content Solutionscdn.cnetcontent.com/3a/fa/3afafb14-9bf6-4f13-85b3-3b6cac536d33.pdf · Getting Started • Download the PDF ... • For information on printer

1

Getting Started

• Download the PDF manual and printer driver (= 2)• Register your product online (= 18)• Make sure you read this guide, including the “Safety

Precautions” (= �3)�section,�before�using�the�printer.• Reading�this�guide�will�help�you�learn�to�use�the�printer�properly.• Store�this�guide�safely�so�that�you�can�use�it�in�the�future.

ENGLISH

CEL-SW2FA210

Page 2: Getting Started - CNET Content Solutionscdn.cnetcontent.com/3a/fa/3afafb14-9bf6-4f13-85b3-3b6cac536d33.pdf · Getting Started • Download the PDF ... • For information on printer

2

Package Contents□� SELPHY�Printer□� Power�Cord

□� Compact�Power�Adapter� CA-CP200�B

□� Paper�Cassette�PCP-CP400

• Printed�matter�is�also�included.

PDF Manual and Printer DriverThe�PDF�manual�and�printer�driver�can�be�downloaded�from�the�following�URL.http://www.canon.com/icpd/• Connect�to�the�Internet�from�a�computer�and�access�the�above�URL.• Access�the�site�for�your�country/region.• Adobe�Reader�is�required�to�view�the�PDF�manual.

Ink and Paper (Sold Separately)Before�use,�purchase�a�Color�Ink�/�Paper�Set.

Color Ink / Paper Set Paper Size (Number of Possible Prints)

Color�Ink�/�Paper�Set�RP-108�(Photo�Paper)�*1 Postcard�(108)

Color�Ink�/�Paper�Set�RP-1080V�(Photo�Paper)�*1 Postcard�(1080)

Color�Ink�/�Paper�Set�KP-36IP�(Postcard)�*1 Postcard�(36)

Color�Ink�/�Paper�Set�KP-108IN�(Photo�Paper)�*1 Postcard�(108)

Color�Ink�/�Paper�Set�KC-36IP�*2 Card�Size�(36)

Color�Ink�/�Label�Set�KC-18IF�(Full-Page�Label)�*2 Card�Size�(18)

Color�Ink�/�Label�Set�KC-18IL�(8�Labels�per�Page)�*2 Card�Size�(18)

Color�Ink�/�Label�Set�KC-18IS�(Square�Labels)�*2 Card�Size�(18)

*1�Uses�Paper�Cassette�PCP-CP400�(included�with�SELPHY).*2�Requires�Paper�Cassette�PCC-CP400�(sold�separately).

Page 3: Getting Started - CNET Content Solutionscdn.cnetcontent.com/3a/fa/3afafb14-9bf6-4f13-85b3-3b6cac536d33.pdf · Getting Started • Download the PDF ... • For information on printer

3

Safety Precautions• Before�using�the�product,�please�ensure�that�you�read�the�safety�precautions�described�below.�

Always�ensure�that�the�product�is�used�correctly.• The safety precautions noted on the following pages are intended to prevent injuries to yourself

and�other�persons,�or�damage�to�the�equipment.• Be�sure�to�also�check�the�guides�included�with�any�separately�sold�accessories�you�use.

Warning Denotes�the�possibility�of�serious�injury�or�death.

• Store this equipment out of the reach of children and infants.Mistakenly�putting�the�power�cord�around�a�child’s�neck�could�result�in�asphyxiation.

• Use only recommended power sources.• Do not attempt to disassemble, alter, or apply heat to the product.• Avoid dropping or subjecting the product to severe impacts.• To avoid the risk of injury, do not touch the interior of the product if it has been

dropped or otherwise damaged.• Stop using the product immediately if it emits smoke, a strange smell, or otherwise

behaves abnormally.• Do not use organic solvents such as alcohol, benzine, or thinner to clean the product.• Do not let the product come into contact with water (e.g. sea water) or other liquids.• Do not allow liquids or foreign objects to enter the product.This�could�result�in�electrical�shock�or�fire.If�liquid�comes�into�contact�with�the�product,�unplug�it�from�the�outlet�and�consult�your�retailer�or�a�Canon�Customer�Support�Help�Desk.

• Do not touch the printer or the power plug during thunderstorms.This�could�result�in�electrical�shock�or�fire.�Immediately�stop�using�the�equipment�and�distance�yourself�from�it.

• Unplug the power cord periodically, and using a dry cloth, wipe away any dust or dirt that has collected on the plug, the exterior of the power outlet, and the surrounding area.

• Do not handle the power cord with wet hands.• Do not use the equipment in a manner that exceeds the rated capacity of the electrical

outlet or wiring accessories. Do not use if the power cord or plug are damaged, or not fully plugged into the outlet.

• Do not allow dirt or metal objects (such as pins or keys) to contact the terminals or plug.

• Do not cut, damage, alter, or place heavy items on the power cord.This�could�result�in�electrical�shock�or�fire.

Caution Denotes�the�possibility�of�injury.

• Do not stick any part of your hand into the printer interior.• Place SELPHY in a safe location where people will not trip over the power cord.Failure�to�do�this�may�lead�to�injury�or�printer�damage.

Page 4: Getting Started - CNET Content Solutionscdn.cnetcontent.com/3a/fa/3afafb14-9bf6-4f13-85b3-3b6cac536d33.pdf · Getting Started • Download the PDF ... • For information on printer

4

Before�Use

• Avoid using, placing, or storing the product in the following places:- Places subject to direct sunlight- Places subject to temperatures above 40 °C (104 °F)- Humid or dusty places- Places subject to strong vibration

This may cause overheating of or damage to the printer or adapter, which may result in electric shock,�burns�or�other�injury,�or�fire.High�temperature�may�deform�the�product�or�adapters.

CAUTION Denotes�the�possibility�of�damage�to�the�equipment.

• Unplug the product from the power outlet when you are not using it.• Do not place anything, such as cloth, on top of the printer while in use.Leaving the unit plugged in for a long period of time may cause it to overheat and distort, resulting�in�fire.• Never reuse paper for printing, even if most of the paper is blank.Reusing�paper�may�damage�the�printer�if�paper�jams�or�the�ink�sheet�adheres�to�the�paper.• Do not unplug the printer while it is printing.If�you�accidentally�turn�the�printer�off�while�printing,�restart�it�and�wait�until�the�paper�is�ejected.�If�paper�jams�and�cannot�be�removed,�contact�your�retailer�or�a�Canon�Customer�Support�Help�Desk.�Do�not�attempt�to�remove�jammed�paper�by�force,�which�may�damage�the�printer.• Do not use the printer near motors or other devices that generate strong magnetic

fields, or in dusty environments.This�may�damage�the�printer�or�cause�malfunction.

Before Use• Images�printed�with�this�product�are�to�be�used�for�personal�enjoyment.�Unauthorized�printing�of�copyrighted�material�is�prohibited.

• For information on printer warranty or Canon Customer Support, please refer to the warranty information�provided�with�your�printer�User�Manual�Kit.

• Although�the�LCD�monitor�is�produced�under�extremely�high-precision�manufacturing�conditions�and�more�than�99.99%�of�the�pixels�meet�design�specifications,�in�rare�cases�some�pixels�may�be�defective�or�may�appear�as�red�or�black�dots.�This�does�not�indicate�damage.�It�also�does�not�affect�printed�images.

• The�LCD�monitor�may�be�covered�with�a�thin�plastic�film�for�protection�against�scratches�during�shipment.�If�so,�remove�the�film�before�use.

Page 5: Getting Started - CNET Content Solutionscdn.cnetcontent.com/3a/fa/3afafb14-9bf6-4f13-85b3-3b6cac536d33.pdf · Getting Started • Download the PDF ... • For information on printer

5

Initial PreparationsPrepare�for�printing�as�follows.�This�example�shows�a�Postcard-size�Color�Ink�/�Paper�Set�(sold�separately),�but�the�same�steps�are�followed�for�other�sizes.

Preparing the Ink Cassette

1 Check the ink cassette and ink sheet.zz Holding�the�ink�cassette�without�touching�the�ink�sheet,�check�the�size�(such�as�“Postcard�Size”�or�“Card�Size”)�to�make�sure�it�matches�the�size�of�paper�you�will�print�on.zz Make�sure�the�ink�sheet�is�taut.�Loose�ink�sheets�may�tear�when�loaded.�If�the�sheet�is�loose,�turn�the�sprocket�as�shown.

zz For�an�ink�cassette�that�has�a�lock�on�the�bottom,�press�the�lock�(as�shown)�to�release�it�as�you�turn�the�sprocket�to�make�the�sheet�taut.

• Do�not�hold�the�ink�cassette�with�wet�hands.�Avoid�touching�the�ink�sheet,�and�avoid�getting�dust�on�it.�Dirt�or�moisture�may�cause�banding�or�affect�print�quality,�tear�ink�sheets�and�prevent�printing,�or�damage�the�printer.

• When�turning�the�sprocket,�turn�it�gently,�only�until�the�sheet�is�taut.�Forcing�the�sprocket�or�overtightening�it�may�tear�ink�sheets�and�prevent�printing,�or�SELPHY�may�run�out�of�ink�before�paper.

• Never�reuse�ink�cassettes,�which�may�damage�the�printer�or�cause�malfunction.

Preparing the Paper Cassette

1 Check the paper size.zz Check the size on the paper cassette (such as “Postcard Size”�or�“Card�Size”)�to�make�sure�it�matches�the�size�of�the�ink�cassette.

2 Open both covers.zz There�are�two�layers�of�covers.�First�open�the�outer�cover�( ),�and�then�the�inner�cover�( ).

3 Load the paper.zz Load�the�paper�in�the�paper�cassette.zz The�paper�cassette�holds�up�to�18�sheets.�Loading�19�or�more�sheets�may�damage�the�printer�or�cause�malfunction.zz Holding�the�paper�as�shown,�load�it�with�the�glossy�side�up.�(Do not touch the glossy side of the paper, which may affect print�quality.)zz Remove any protective sheets from the paper, and load only paper�into�the�cassette.

Ink sheet

Glossy side

Page 6: Getting Started - CNET Content Solutionscdn.cnetcontent.com/3a/fa/3afafb14-9bf6-4f13-85b3-3b6cac536d33.pdf · Getting Started • Download the PDF ... • For information on printer

6

Initial Preparations

zz When making postcard prints with space for a stamp, load the�paper�with�the�stamp�area�facing�as�shown.

4 Close the inner cover.zz Close�the�inner�cover�firmly�until�it�clicks�into�place.zz Leave�the�outer�cover�open�when�printing.

• This product is designed to achieve excellent performance when used with genuine Canon�Color�Ink�/�Paper�Sets�for�SELPHY�CP�printers.�Canon�shall�not�be�liable�for�any�damage�to�this�product�caused�by�the�use�of�non-genuine�Canon�Color�Ink�/�Paper�Sets�for�SELPHY�CP�printers.

• Never�do�the�following.�This�may�damage�the�printer�or�cause�malfunction.- Loading�paper�upside-down,�with�the�glossy�and�back�sides�reversed- Bending�or�separating�paper�at�the�perforations�before�printing- Using�label�paper�whose�upper�label�surface�is�peeling�off�or�has�been�partially�pulled�

up- Writing�on�paper�before�printing- Reusing�paper,�such�as�printing�on�blank�areas

• Do�not�touch�the�springs�on�the�paper�cassette.�Accidentally�bending�the�springs�may�prevent�efficient�paper�feeding.

• Note�that�one�spring�is�attached�in�the�center�on�the�top�of�card-size�paper�cassettes.• Avoid�touching�or�rubbing�the�glossy,�printing�side�of�the�paper.�Do�not�handle�paper�with�wet�hands,�and�keep�paper�free�of�dust.�Dirt�or�moisture�may�cause�banding�or�affect�print�quality,�or�damage�the�printer.

Loading the Cassettes

1 Open the covers.zz Open�the�ink�and�paper�compartment�covers.

2 Load the ink cassette.zz Insert the ink cassette into the printer in the direction of the arrow�on�the�cassette�until�it�clicks�into�place.zz Close�the�ink�cassette�compartment�cover.

Page 7: Getting Started - CNET Content Solutionscdn.cnetcontent.com/3a/fa/3afafb14-9bf6-4f13-85b3-3b6cac536d33.pdf · Getting Started • Download the PDF ... • For information on printer

7

Initial Preparations

3 Load the paper cassette.zz Making sure the outer cover is open, insert the paper cassette�all�the�way�into�the�compartment.

Connecting the Power

1 Plug the adapter cord into SELPHY.zz Insert�the�adapter�plug�fully�into�the�power�inlet�on�SELPHY.

2 Connect the power cord.zz Connect the power cord to the compact power adapter, and then�plug�the�other�end�into�a�power�outlet.

Choosing the Display Language

1 Turn on SELPHY.zz Press the <q>�button�until�the�screen�at�left�is�displayed.zz To�turn�off�SELPHY,�hold�the�<q>�button�again�until�the�screen�changes.

2 Raise the screen (LCD monitor).zz Never�force�the�screen�up�more�than�45°,�which�may�damage�the�printer�or�cause�malfunction.

3 Access the setting screen.zz Press the <k>�button.zz Press the <u><d>�buttons�to�select�[Change�Settings],�and�then press the <o >�button.

4 Access the language setting screen.zz Press the <u><d>�buttons�to�select�[Language],�and�then�press the <o>�button.

5 Choose a language.zz Press the <u><d><l><r>�buttons�to�select�a�language,�and then press the <o>�button.

Approx.�45°

Page 8: Getting Started - CNET Content Solutionscdn.cnetcontent.com/3a/fa/3afafb14-9bf6-4f13-85b3-3b6cac536d33.pdf · Getting Started • Download the PDF ... • For information on printer

8

Checking Supported Memory CardsSupported�memory�cards�are�as�follows.• SD Memory Card• SDHC�Memory�Card• SDXC Memory Card • miniSD Memory Card*

• miniSDHC�Memory�Card*• microSD�Memory�Card*• microSDHC�Memory�Card*• microSDXC�Memory�Card*

*�Requires�an�optional�dedicated�adapter.

• For�memory�cards�that�require�an�adapter,�always�insert�the�card�into�the�adapter�before�inserting�the�adapter�into�the�card�slot.�If�you�mistakenly�insert�the�memory�card�into�the�card�slot�without�an�adapter,�you�may�not�be�able�to�remove�the�card�from�the�printer.

• Use�a�memory�card�formatted�with�the�device�you�shot�the�photos�with.�Images�on�cards�formatted�with�a�computer�may�not�be�recognized.

Printing ImagesSelect�images�and�specify�the�number�of�prints�as�follows.�Here,�printing�from�an�SD�memory�card�is�described�as�an�example,�but�you�can�print�from�other�memory�cards�with�the�same�steps.

1 Turn on SELPHY and raise the screen.zz Follow�steps�1�–�2�in�“Choosing�the�Display�Language”�to�turn�on�SELPHY�and�raise�the�screen.

2 Insert the memory card into the slot.zz Insert the memory card facing as shown until it clicks into place.zz To remove the card, push it in until it clicks, and then slowly release�it.zz The�image�display�screen�used�in�the�next�step�is�displayed.

3 Choose an image.zz Press the <l><r>�buttons�to�select�an�image�to�print.zz To�jump�forward�or�back�by�five�images,�hold�down�the�<l><r>�buttons.

4 Specify the number of prints.zz Press the <u><d>�buttons�to�specify�the�number�of�prints.zz To�increase�or�decrease�the�quantity�by�five�prints,�hold�down�the <u><d>�buttons.zz To�print�other�images�at�the�same�time,�repeat�steps�3�–�4.

Label�side

Prints of current image

Total prints

Page 9: Getting Started - CNET Content Solutionscdn.cnetcontent.com/3a/fa/3afafb14-9bf6-4f13-85b3-3b6cac536d33.pdf · Getting Started • Download the PDF ... • For information on printer

9

Wi-Fi�(Wireless�LAN)�Precautions

5 Print.zz Press the <p>�button�to�start�printing.zz While�printing,�paper�passes�in�and�out�of�the�back�of�SELPHY�several�times.�Do�not�touch�the�paper�until�printing�is�finished�and�the�print�is�ejected�onto�the�paper�cassette.zz Do not allow 19 or more prints to collect in the ejection area on�the�paper�cassette.zz To cancel printing in progress, always press the <v>�button.

• Never�pull�out�the�paper�cassette,�open�the�ink�cassette�compartment�cover,�or�remove�a memory card while printing or when you hear printer operation sounds immediately after�it�has�been�turned�on.�This�may�damage�the�printer.

• To cancel printing in progress, always press the <v>�button.�Printing�cannot�be�canceled�by�pressing�the�<q>�button,�and�unplugging�the�printer�may�damage�it.

Wi-Fi (Wireless LAN) Precautions• This�product�is�embedded�with�a�wireless�device.�The�model�number�is�CD1132�(including�WLAN�module�model�WM319).

• Countries�and�Regions�Permitting�WLAN�Use- Use�of�WLAN�is�restricted�in�some�countries�and�regions,�and�illegal�use�may�be�punishable�under�national�or�local�regulations.�To�avoid�violating�WLAN�regulations,�visit�the�Canon�website�to�check�where�use�is�allowed.� Note�that�Canon�cannot�be�held�liable�for�any�problems�arising�from�WLAN�use�in�other�countries�and�regions.

• Doing any of the following may incur legal penalties:- Disassembling�or�modifying�the�product- Removing�the�certification�labels�from�the�product

• According�to�foreign�exchange�and�foreign�trade�law�regulations,�export�permission�(or�service�transaction�permission)�from�the�Japanese�government�is�necessary�to�export�strategic�resources�or�services�(including�this�product)�outside�Japan.

• Because�this�product�includes�American�encryption�software,�it�falls�under�U.S.�Export�Administration�Regulations,�and�cannot�be�exported�to�or�brought�into�a�country�under�U.S.�trade�embargo.

• Be�sure�to�make�notes�of�the�wireless�LAN�settings�you�use.� The�wireless�LAN�settings�saved�to�this�product�may�change�or�be�erased�due�to�incorrect�operation of the product, the effects of radio waves or static electricity, or accident or malfunction.�Be�sure�to�make�notes�of�wireless�LAN�settings�as�a�precaution.�Please�note�that�Canon�accepts�no�responsibility�for�direct�or�indirect�damages�or�loss�of�earnings�resulting�from�a�degradation�or�disappearance�of�content.

• When�transferring�this�product�to�another�person,�disposing�of�it,�or�sending�it�for�repair,�be�sure�to�note�the�wireless�LAN�settings�and�reset�the�product�to�its�default�settings�(erase�settings)�if�necessary.

• Canon�will�not�make�compensation�for�damages�resulting�from�loss�or�theft�of�the�product.� Canon�accepts�no�responsibility�for�damages�or�loss�resulting�from�unauthorized�access�or�use�of�target�devices�registered�on�this�product�due�to�loss�or�theft�of�the�product.

Page 10: Getting Started - CNET Content Solutionscdn.cnetcontent.com/3a/fa/3afafb14-9bf6-4f13-85b3-3b6cac536d33.pdf · Getting Started • Download the PDF ... • For information on printer

10

Wi-Fi�(Wireless�LAN)�Precautions

• Be�sure�to�use�the�product�as�directed�in�this�guide.� Be�sure�to�use�the�wireless�LAN�function�of�this�product�within�the�guidelines�noted�in�this�guide.�Canon�accepts�no�responsibility�for�damages�or�loss�if�the�function�and�product�are�used�in�ways�other�than�as�described�in�this�guide.

• Do�not�use�the�wireless�LAN�function�of�this�product�near�medical�equipment�or�other�electronic�equipment.� Use�of�the�wireless�LAN�function�near�medical�equipment�or�other�electronic�equipment�may�affect�operation�of�those�devices.

Radio Wave Interference PrecautionsThis�product�may�receive�interference�from�other�devices�that�emit�radio�waves.To�avoid�interference,�be�sure�to�use�this�product�as�far�away�as�possible�from�such�devices,�or�avoid�using�the�devices�at�the�same�time�as�this�product.

Hereby,�Canon�Inc.,�declares�that�this�CD1132�(SELPHY�CP1200)�is�in�compliance�with�the�essential�requirements�and�other�relevant�provisions�of�Directive�1999/5/EC.

Please contact the following address for the original Declaration of Conformity:CANON EUROPA N.V.Bovenkerkerweg�59,�1185�XB�Amstelveen,�The�NetherlandsCANON INC.30-2,�Shimomaruko�3-chome,�Ohta-ku,�Tokyo�146-8501,�Japan

Security PrecautionsBecause�Wi-Fi�uses�radio�waves�to�transmit�signals,�security�precautions�more�stringent�than�when�using�a�LAN�cable�are�required.Keep�the�following�points�in�mind�when�using�Wi-Fi.• Use�only�networks�you�are�authorized�to�use.

This product searches for Wi-Fi networks in the vicinity and displays the results on the screen.Networks�you�are�not�authorized�to�use�(unknown�networks)�may�also�be�displayed.�However,�attempting�to�connect�to�or�using�such�networks�could�be�regarded�as�unauthorized�access.�Be�sure�to�use�only�networks�you�are�authorized�to�use,�and�do�not�attempt�to�connect�to�other�unknown�networks.

Page 11: Getting Started - CNET Content Solutionscdn.cnetcontent.com/3a/fa/3afafb14-9bf6-4f13-85b3-3b6cac536d33.pdf · Getting Started • Download the PDF ... • For information on printer

11

Printing�Directly�from�a�Smartphone�or�Tablet

If�security�settings�have�not�been�properly�set,�the�following�problems�may�occur.• Transmission monitoringThird�parties�with�malicious�intent�may�monitor�Wi-Fi�transmissions�and�attempt�to�acquire�the�data�you�are�sending.

• Unauthorized�network�accessThird parties with malicious intent may gain unauthorized access to the network you are using�to�steal,�modify,�or�destroy�information.Additionally,�you�could�fall�victim�to�other�types�of�unauthorized�access�such�as�impersonation (where someone assumes an identity to gain access to unauthorized information)�or�springboard�attacks�(where�someone�gains�unauthorized�access�to�your�network�as�a�springboard�to�cover�their�tracks�when�infiltrating�other�systems).To�prevent�these�types�of�problems�from�occurring,�be�sure�to�thoroughly�secure�your�Wi-Fi�network.Only use this product’s Wi-Fi function with a proper understanding of Wi-Fi security, and balance�risk�and�convenience�when�adjusting�security�settings.

While PrintingDo�not�disconnect�the�printer�from�other�devices�until�printing�is�finished,�as�this�may�cause�incomplete�or�incorrect�prints.

Printing Directly from a Smartphone or TabletEven�in�places�without�an�access�point,�you�can�print�directly�from�a�smartphone�or�tablet�connected�wirelessly�to�the�printer. For�convenience�in�this�manual,�smartphones�and�tablets�are�collectively�referred�to�as�“smartphone”.

1 Install the dedicated application on your smartphone.zz For�an�iOS�device�(iPhone,�iPad,�or�iPod�touch),�visit�the�App�Store�and�download�and�install�Canon�PRINT�Inkjet/SELPHY.zz For�an�Android�device,�download�and�install�Canon�PRINT�Inkjet/SELPHY�from�Google�Play.zz For a Windows RT device, visit the Windows Store and download�and�install�Canon�PRINT�Inkjet/SELPHY.

2 Prepare SELPHY.zz Remove�any�inserted�memory�cards�or�USB�flash�drives.zz Insert a loaded paper cassette and an ink cassette in SELPHY.�For�details,�refer�to�the�“Initial�Preparations”�(= �5).

Page 12: Getting Started - CNET Content Solutionscdn.cnetcontent.com/3a/fa/3afafb14-9bf6-4f13-85b3-3b6cac536d33.pdf · Getting Started • Download the PDF ... • For information on printer

12

Printing�Directly�from�a�Smartphone�or�Tablet

3 Access the setting screen.zz Press the <k>�button.zz Press the <u><d>�buttons�to�select�[Wi-Fi�Settings],�and�then press the <o>�button.zz Press the <u><d>�buttons�to�select�[Connection�Settings],�and then press the <o>�button.

4 Check the printer name.zz Check the displayed printer name and press the <o> button.zz When�you�connect�devices�via�Wi-Fi,�this�name�will�be�displayed�on�the�target�device�to�identify�the�printer.

5 Choose the connection method.zz Press the <u><d>�buttons�to�select�[Direct�Connection],�and then press the <o>�button.

zz The�screen�on�the�left�is�displayed.

6 Use your smartphone to join the network displayed on the printer screen.zz In the smartphone’s Wi-Fi settings, select the SSID (network name)�displayed�on�the�printer.zz Enter the password displayed on the printer into the password�field.

Page 13: Getting Started - CNET Content Solutionscdn.cnetcontent.com/3a/fa/3afafb14-9bf6-4f13-85b3-3b6cac536d33.pdf · Getting Started • Download the PDF ... • For information on printer

13

Printing Directly from a Camera

7 Use your smartphone to print.zz Start�Canon�PRINT�Inkjet/SELPHY,�choose�images,�and�print.

zz Once�printing�begins,�the�screen�on�the�left�is�displayed.zz Do not disconnect the devices or close the application while this�screen�is�displayed.�Images�may�not�be�printed�correctly�or�completely.

zz The�standby�screen�on�the�left�is�displayed�when�printing�is�finished.

Subsequent Printing• Once�you�have�completed�the�connection�settings,�the�second�standby�screen�in�step�7�is�displayed�automatically�when�you�turn�on�the�printer.�To�print,�after�the�standby�screen�is�displayed,�simply�use�the�smartphone�as�described�in�steps�6�–�7.

• During�standby-screen�display,�you�can�view�the�SSID�and�password�by�pressing�the�<o> button.

Printing Directly from a CameraYou�can�print�as�follows�by�connecting�the�printer�to�a�camera�compatible�with�DPS�over�IP,�the�PictBridge�standard�for�Wi-Fi�connections.

1 Prepare SELPHY.zz Follow�steps�2�–�5�in�“Printing�Directly�from�a�Smartphone�or�Tablet”�to�access�the�screen�on�the�left.

2 Use the camera to join the network displayed on the printer screen.zz In the camera’s Wi-Fi settings, select the SSID (network name)�displayed�on�the�printer.zz Enter the password displayed on the printer into the password�field.

Page 14: Getting Started - CNET Content Solutionscdn.cnetcontent.com/3a/fa/3afafb14-9bf6-4f13-85b3-3b6cac536d33.pdf · Getting Started • Download the PDF ... • For information on printer

14

Printing from a Computer

3 Use the camera to print.zz Use�the�camera�to�select�images�and�print.

zz Once�printing�begins,�the�screen�on�the�left�is�displayed.zz Do�not�disconnect�the�devices�while�this�screen�is�displayed.�Images�may�not�be�printed�correctly�or�completely.

zz The�standby�screen�on�the�left�is�displayed�when�the�camera�is�no�longer�connected.

Subsequent Printing• Once�you�have�completed�the�connection�settings,�the�second�standby�screen�in�step�3�is�displayed�automatically�when�you�turn�on�the�printer.�To�print,�after�the�standby�screen�is�displayed,�simply�use�the�camera�as�described�in�steps�2�–�3.

• During�standby-screen�display,�you�can�view�the�SSID�and�password�by�pressing�the�<o> button.

Printing from a ComputerWhat�You�Will�NeedUSB�cable,�2.5�m�(8.2�ft.)�or�shorter,�sold�separately�(SELPHY�port:�Mini-B)

Confirming Access Point Compatibility• The�computer�with�the�images�to�send�must�be�connected�to�the�access�point.�The�access�point�must�support�IEEE�802.11b/g�connections.

Page 15: Getting Started - CNET Content Solutionscdn.cnetcontent.com/3a/fa/3afafb14-9bf6-4f13-85b3-3b6cac536d33.pdf · Getting Started • Download the PDF ... • For information on printer

15

Printing from a Computer

Connecting the Printer to the Access PointFollow�these�steps�to�connect�to�a�WPS�(push-button)�compatible�access�point.�For�non-WPS�access points, refer to the PDF manual (= �2).

1 Choose the connection method.zz Follow�steps�2�–�4�in�“Printing�Directly�from�a�Smartphone�or�Tablet”�to�access�the�screen�on�the�left.zz Press the <u><d>�buttons�to�select�[Via�Wi-Fi�Network],�and then press the <o>�button.

2 Choose the access point connection method.zz Press the <u><d>�buttons�to�select�[WPS�Connection],�and�then press the <o>�button.

3 Choose the WPS connection method.zz Press the <u><d>�buttons�to�select�[PBC�Method],�and�then press the <o>�button.

zz The�screen�on�the�left�is�displayed.

Page 16: Getting Started - CNET Content Solutionscdn.cnetcontent.com/3a/fa/3afafb14-9bf6-4f13-85b3-3b6cac536d33.pdf · Getting Started • Download the PDF ... • For information on printer

16

Printing from a Computer

4 On the access point, hold down the WPS connection button for a few seconds.zz For�details�on�where�the�button�is�located�and�how�long�to�press�it,�check�the�access�point�user�manual.

5 Establish the connection.zz On the printer, press the <o>�button.zz [Connecting]�is�displayed�on�the�printer,�followed�by�[Connected�to�access�point]�when�connected.�Press�the�<o>�button.

zz The�standby�screen�on�the�left�is�displayed,�indicating�the�name�of�the�access�point.

Subsequent Connections• Once you connect to an access point, the printer will automatically reconnect to the previous access�point�whenever�you�turn�it�on�again,�and�the�standby�screen�in�step�5�will�be�displayed.

Preparing the Computer (Windows)1 Download the printer driver.zz Connect�to�the�Internet�from�a�computer�and�access�“http://www.canon.com/icpd/”.zz Select�your�country/region�and�follow�the�instructions�displayed�to�complete�the�download.zz Double-click�the�downloaded�file�and�follow�the�on-screen�instructions.zz If�the�[User�Account�Control]�window�is�displayed,�follow�the�on-screen�instructions.

2 Install.3 Choose the connection method.zz When�[Connection�Method]�is�displayed,�select�[Use�with�a�wireless�network]�and�click�[Next].

4 To complete the installation process, choose the printer to connect to.zz Choose�the�printer�to�connect�to,�and�then�click�[Next].zz The�printer�driver�is�installed.

Page 17: Getting Started - CNET Content Solutionscdn.cnetcontent.com/3a/fa/3afafb14-9bf6-4f13-85b3-3b6cac536d33.pdf · Getting Started • Download the PDF ... • For information on printer

17

Printing from a Computer

PrintingUse�photo�software�to�print�as�follows.�For�computer�or�photo�software�instructions,�refer�to�the�relevant�user�manual.

1 Confirm that SELPHY is connected to the access point.zz Confirm�that�the�standby�screen�is�displayed�on�SELPHY.

2 Access the printing dialog box.zz Start�the�photo�software,�select�images�to�print,�and�access�the�printing�dialog�box.zz As�the�destination�printer,�select�[Canon�SELPHY�CP1200].

3 Choose printing options.zz Choose�a�paper�size�corresponding�to�the�size�of�paper�and�ink�cassettes�in�SELPHY.�Also�choose�bordered�or�borderless�printing�as�an�option�with�the�listed�paper�sizes.zz Choose�the�printing�orientation�and�number�of�copies,�as�desired.

4 Print.

• Mac�OS:�If�[Canon�SELPHY�CP1200]�is�not�available�as�a�destination�printer,�register�SELPHY�on�the�computer�as�follows.� Access�[System�Preferences]�>�[Printers�&�Scanners]�or�[Print�&�Scan].� Click�[+]�below�the�list.� Choose�[Canon�SELPHY�CP1200].� Click�[Add].

Use of genuine Canon accessories and consumables is recommended.

This product is designed to achieve excellent performance when used with genuine Canon accessories�and�consumables.Canon�shall�not�be�liable�for�any�damage�to�this�product�and/or�accidents�such�as�fire,�etc.,�caused�by�the�malfunction�of�non-genuine�Canon�accessories�(e.g.,�a�leakage�and/or�explosion�of�a�battery�pack).�Canon’s�commercial�warranty�(where�offered)�does�not�cover�the�damage�caused�by�the�use�of�any�non-genuine�accessories�or�consumables.

CAUTIONRISK�OF�EXPLOSION�IF�BATTERY�IS�REPLACED�BY�AN�INCORRECT�TYPE.DISPOSE�OF�USED�BATTERIES�ACCORDING�TO�LOCAL�REGULATION.

Connecting to a ComputerTo�connect�SELPHY�to�a�computer,�use�a�USB�cable�(sold�separately,�maximum�2.5�m)�that�has�a�Mini-B�connector�on�the�SELPHY�end.

Graphical symbols placed on the equipmentClass�II�equipmentDirect current

Page 18: Getting Started - CNET Content Solutionscdn.cnetcontent.com/3a/fa/3afafb14-9bf6-4f13-85b3-3b6cac536d33.pdf · Getting Started • Download the PDF ... • For information on printer

18

Trademarks and Licenses• Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the�United�States�and/or�other�countries.

• Macintosh�and�Mac�OS�are�trademarks�of�Apple�Inc.,�registered�in�the�U.S.�and�other�countries.

• App�Store,�iPhone,�and�iPad�are�trademarks�of�Apple�Inc.• The�SDXC�logo�is�a�trademark�of�SD-3C,�LLC.• Wi-Fi®,�Wi-Fi�Alliance®,�WPA™,�WPA2™�and�Wi-Fi�Protected�Setup™�are�trademarks�or�registered�trademarks�of�the�Wi-Fi�Alliance.

• All�other�trademarks�are�the�property�of�their�respective�owners.• This�device�incorporates�exFAT�technology�licensed�from�Microsoft.• Portions�of�the�code�used�in�the�firmware�are�based�in�part�on�the�work�of�the�Independent�JPEG�Group.

• Based�on�XySSL:�Copyright�(C)�2006-2008�Christophe�Devine�Copyright�(C)�2009�Paul�Bakker�<polarssl_maintainer�at�polarssl�dot�org>�All�rights�reserved.

Online product registration

Take a few minutes to register your product online at http://www.canon-europe.com/manual-register�and�you’ll�get:

• Your own secure Canon account and loginWith�access�to�Canon�services�such�as�irista�and�The�Gallery.

• The latest product and promotion information direct to your inboxSubscribe�to�our�emails�and�be�the�first�to�get�news�about�products,�events�and�promotions�as�well�as�practical�advice,�hints,�tips�and�tutorials.

• Information personalised to youTell�us�a�little�bit�more�about�you�and�your�Canon�products�so�that�we�can�tailor�the�information�we�send�you.�

©�CANON�INC.�2015