The complete range of high-performance marine lubricants

Comparative Viscosity Classifications

42

40

38

36

34

32

30

28

26

24

22

20

18

16

14

12

10

8

6

4

2

850

775

700

625

550

500

450

400

365

315

280

240

205

175

140

115

85

60

40

20

10

ISO VG Grade SAE Gear Viscosity Grade

SAE Viscosity Grade

Common Base Oil Nomenclature

460

320

220

150

100

68

46

32

22

15

10

140

90

85W

80W

75W

50

40

30

20

10W

5W

150 Brt.

650 N

500 N

300 N

200 N

100 N

mm

2 ⁄s a

t 40°

C

mm

2 ⁄s a

t 100

°C

GermanyChevron Products Germany Inc.Jungfernstieg 4920354 HamburgGermanyTel: +49 40 349 710 00Email: cmlgermany@chevron.com SingaporeChevron Singapore Pte. Ltd.Chevron House30 Raffles Place #21-01Singapore 048622Tel: +65 6318 1000Email: cmlsingapore@chevron.com

GreeceChevron Marine Products Hellas S.A.70, Filonos Street185 35 PiraeusAthens, GreeceTel: +30 210 9473000Email: cmlmed@chevron.com

United KingdomChevron Products UK Limited1 Westferry Circus, Canary WharfLondon E14 4HAUnited KingdomTel: +44 20 7719 3384Email: cmlukl@chevron.com

Hong KongChevron Hong Kong Ltd.15/F., Tower BManulife Financial Centre223-231 Wai Yip StreetKwun Tong, Kowloon, Hong KongTel: +852 2802 8338Email: cmlhkl@chevron.com

United StatesChevron Marine Products LLC9401 Williamsburg Plaza, Suite 201Louisville, KY 40222, USATel. Order Desk: +1 800 283 9582Tel. (outside USA): +1 502 420 7051Email: cmlusl@chevron.com

For more information, please contact any Chevron Marine Lubricants sales office:

Or visit our website: www.chevronmarineproducts.com

Always confirm that the product selected is consistent with the original equipment manufacturer’s recommendation for the equipment operating conditions and customer’s maintenance practices.

© 2017 Chevron Marine Products LLC. All rights reserved. All trademarks are the property of Chevron Intellectual Property LLC or their respective owners. IDU179869 06/17  R-258 (6-17)

marine lubricants product list

Chevron offers the marine industry a complete range of high-performance marine lubricants. Product development is performed at Chevron laboratories, and all marine engine oils complete extensive field trials before introduction.

Chevron products are manufactured to consistently high standards at more than fifty blending plants worldwide. Supply is available at major ports all around the globe. The following table gives a brief description and typical physical properties of each product. For more details,

please refer to individual product information at www.chevronmarineproducts.com, or contact your local Chevron representative or marketing office.

The data contained in the tables above are typical values shown for information only and may vary from location to location. Consult your original equipment manufacturer for recommendations about selecting the appropriate product for your equipment.

Cooling Water TreatmentsHavoline® XLI Anticorrosion Water-based carboxylic acids 1.058 5 – 10 Nil Low Nil Long-life corrosion protection†.Havoline XLC Antifreeze Water-based carboxylic acids 1.113 50 –40 Harmful Nil Long-life protection against freezing,

with mono ethylene glycol (MEG) boiling, corrosion†.

Density at 20°C kg/l

Concentration (In water) %

ToxicClassification

Content on Nitrite; Amine Phosphate

Borate, Silicate Description/ApplicationBaseSeal

Compatibility

No adverse effect on rubber hoses and gasket materials

Freeze Protection

°C

† The proprietary inhibitor technology operates by attacking free radical sites on the metal surface and sealing them before corrosion begins, also providing a very efficient heat transfer.

SAE or ISO VG

Density 15°C kg/l

Viscosity Index Flash Point °C

Pour Point °C

Base No. (BN) Product Description

Kinematic Viscosity mm2/s (cSt) @

100°C40°C

Turbine OilsGST® Premium 32 32 — 31.5 5.4 105 224 –14 — Premium turbine oil for special Mitsubishi application under MS04-MA-CL002.Regal® R&O 32 32 0.86 32 5.5 110 220 –15 — Marine turbine oil, including gas turbines.Regal® R&O 46 46 0.87 46 7.0 110 235 –15 — Marine turbine oil, including gas turbines.Regal® R&O 68 68 0.86 68 9.1 110 245 –15 — Marine turbine oil, including gas turbines.Regal® R&O 100 100 — 95.0 10.8 97 262 –15 — ISO VG 100 turbine oil for steam and hydroelectric turbines.Regal® R&O 320 320 — 304 23.2 95 298 –12 — ISO VG 320 turbine oil for steam and hydroelectric turbines.

Hydraulic OilsClarity® Synth. Hydraulic Oil AW 32 32 — 32.5 7.0 186 228 –48 — Synthetic zinc-free and ashless hydraulic fluid (environmentally sensitive areas) in ISO VG 32.Clarity® Synth. Hydraulic Oil AW 46 46 — 46.5 9.3 186 230 –42 — Synthetic zinc-free and ashless hydraulic fluid (environmentally sensitive areas) in ISO VG 46.Clarity® Synth. Hydraulic Oil AW 68 68 — 68.0 11.4 162 218 –45 — Synthetic zinc-free and ashless hydraulic fluid (environmentally sensitive areas) in ISO VG 68.Clarity® Hydraulic Oil AW 100 100 — 95.0 13.8 145 266 –40 — High value zinc-free hydraulic oil of ISO VG 100.Rando® HDZ 15 15 0.88 16 3.9 140 150 –54 — High VI hydraulic oil.Rando® HDZ 22 22 0.87 22 5.1 160 188 –53 — High VI hydraulic oil.Rando® HDZ 32 32 0.87 32 6.3 153 220 –50 — High VI hydraulic oil.Rando® HDZ 46 46 0.88 46 8.2 153 186 –45 — High VI hydraulic oil.Rando® HDZ 68 68 0.88 68 11.0 154 212 –42 — High VI hydraulic oil.Rando® HDZ 100 100 0.88 100 14.2 145 232 –39 — High VI hydraulic oil.

Gear OilsMeropa® 68 68 0.88 68 8.6 96 225 –30 — Extreme pressure industrial gear lubricant.Meropa® 100 100 0.89 100 11.2 97 230 –27 — Extreme pressure industrial gear lubricant.Meropa® 150 150 0.89 150 14.5 95 230 –24 — Extreme pressure industrial gear lubricant.Meropa® 220 220 0.90 220 18.8 95 240 –21 — Extreme pressure industrial gear lubricant.Meropa® 320 320 0.90 320 24.0 95 240 –21 — Extreme pressure industrial gear lubricant.Meropa® 460 460 0.90 460 30.3 95 250 –15 — Extreme pressure industrial gear lubricant.Meropa® 680 680 0.92 680 37.5 90 250 –15 — Extreme pressure industrial gear lubricant.Meropa® Synlube WS 150 150 1.0527 150 25.0 227 284 –42 — Premium performance synthetic industrial gear oil (PAG based).Meropa® Synlube WS 220 220 1.0575 220 41.8 241 284 –42 — Premium performance synthetic industrial gear oil (PAG based).Meropa® Synlube WS 460 460 1.0667 460 85.3 262 262 –36 — Premium performance synthetic industrial gear oil (PAG based).Meropa® Synlube WS 680 680 1.0729 680 122.2 272 272 –33 — Premium performance synthetic industrial gear oil (PAG based).Meropa® Synthetic EP 150 150 — 142 19.9 162 242 –51 — A synthetic high value gear oil of ISO VG 150.Pinnacle® Marine Gear 220 220 0.89 220 22.7 126 250 –45 — A synthetic high value gear oil of ISO VG 220.

Compressor OilsCapella® HFC 32 32 1.00 32 6.0 135 245 –48 — Refrigeration compressor oil, for chlorine-free refrigerants such as R134a, R404a, and R507.Capella® HFC 55 55 1.01 55 9.1 145 275 –45 — Refrigeration compressor oil, for chlorine-free refrigerants such as R134a, R404a, and R507.Capella® HFC 100 100 1.00 100 11.9 108 290 –42 — Refrigeration compressor oil, for chlorine-free refrigerants such as R134a, R404a, and R507.Capella® Low Temp AB 68 68 0.87 68 6.5 0 190 –42 — Refrigeration compressor oil, for R22 or R502 operating at low evaporator temperatures.Capella® WF 68 68 0.91 68 6.8 22 198 –36 — Refrigeration compressor oil, for ammonia, methylchloride, CO2 and certain types of (H)CFC refrigerant gases.Cetus® DE 100 100 0.96 95.5 10.1 82 232 –30 — Diester based oil for reciprocating air compressors.Cetus® PAG 185 1.06 185 37.0 250 260 –30 — Oil for enclosed hydrocarbon and natural gas compressors.Cetus® PAO 46 46 0.84 46 7.8 136 230 –59 — PAO-based oil for rotary air compressors.Cetus® PAO 68 68 0.85 68 10.3 138 235 –40 — PAO-based oil for both rotary air compressors and turbochargers.Compressor Oil EP VDL 100 100 0.88 100 11.2 97 230 –12 — Mild EP oil for reciprocating air compressors.

Specialty ProductsCylinder Oil W 460 460 — 437 30.4 99 308 -9 — Emulsifying cylinder oil for steam applications and lubrication of worm gears.Delo® 400 LE Synthetic 5W-40 5W-40 0.858 90 14.6 169 222 -47 10.5 High speed diesel engine synthetic oil, API CJ-4, MAN M 3575, MTU Type 2.1.HDAX® 5200 Low Ash Gas Engine Oil SAE 40 40 0.8790 124 13.5 104 230 -30 4.2 Low ash gas engine oil.Rust Proof Compound L — 0.86 — — — min. 64 — — Solvent cutback rust preventative for steel cables and spare parts.Texamatic® 7045E — 0.862 33.8 7.4 194 200 -51 N/A Automatic transmission fluid.Texatherm® 32 32 0.86 32 5.5 106 220 –15 — Heat transfer fluid for temperatures up to 320°C (max. film temperature 340°C).Texatherm® 46 46 0.86 46 6.9 105 235 –15 — Heat transfer fluid for temperatures up to 320°C (max. film temperature 340°C).

SAE or ISO VG

Density 15°C kg/l

Viscosity Index Flash Point °C

Pour Point °C

Base No. (BN) Product Description

Kinematic Viscosity mm2/s (cSt) @

100°C40°C

Slow-speed Engine OilsTaro® Special HT LF 50 0.90 — 19.5 — 280 –12 25 Slow-speed diesel engine cylinder oil for low sulphur application.Taro® Special HT LS 40 50 0.92 247 21.0 100 270 –15 40 Slow-speed diesel engine cylinder oil for low sulphur application. Taro® Special HT 55 50 0.92 247 20.0 105 270 –15 55 Slow-speed diesel engine cylinder oil for high load application. Taro® Special HT 70 50 0.93 247 20.0 105 270 –15 70 Slow-speed diesel engine cylinder oil for high load application.Taro® Special HT 100 50 0.94 — — 105 270 –15 100 Slow-speed diesel engine cylinder oil for low sulphur application (cold corrosion).Taro® Special HT Ultra 60 0.98 — — — min 180 — 140 Slow-speed diesel engine cylinder oil for low sulphur application (cold corrosion).Veritas® 800 Marine 30 30 0.89 111 12.0 95 240 –12 5.4 Slow-speed engine system oil.

Medium-speed Engine OilsDelo® 710 LE SAE 20W-40 20W-40 0.880 136.4 15.4 113 230 –27 typ, –26 max 9.2 Zinc- and chlorine-free high performance multi-grade diesel engine system oil.Delo® 1000 Marine 30 30 0.89 99 12.0 100 240 –18 12 Medium-speed engine oil. Fuel sulphur level up to 1.5%.Delo® 1000 Marine 40 40 0.90 135 14.0 100 240 –18 12 Medium-speed engine oil. Fuel sulphur level up to 1.5%.Delo® SHP SAE 30 30 0.9 — 11.7 — 220 –15 12 High performance SAE 30 diesel engine oil for medium- and high-speed trunk piston diesel engines operating under severe conditions.

Delo® SHP SAE 40 40 0.9 — 14 — 240 –15 12 High performance SAE 40 diesel engine oil for medium- and high-speed trunk piston diesel engines operating under severe conditions.

Taro® 20 DP 30(X)* 30 0.90 95 11.0 100 240 –12 20 Medium-speed engine oil. Fuel sulphur level up to 2%.Taro® 20 DP 40(X)* 40 0.90 135 14.0 100 240 –12 20 Medium-speed engine oil. Fuel sulphur level up to 2%.Taro® 30 DP 30(X)* 30 0.90 95 11.0 100 240 –12 30 Medium-speed engine oil. Fuel sulphur level up to 4%.Taro® 30 DP 40(X)* 40 0.90 135 14.0 100 240 –12 30 Medium-speed engine oil. Fuel sulphur level up to 4%.Taro® 40 XL 40(X)* 40 0.91 135 14.0 100 240 –12 40 Medium-speed engine oil. Fuel sulphur level up to 4.5%.Taro® 50 XL 40(X)* 40 0.92 135 14.0 100 240 –12 50 Medium-speed engine oil. Fuel sulphur level up to 4.5%. For engines with low oil consumption.

High-speed Engine OilsDelo® 400 LE SAE 15W-40 15W-40 0.8806 131 15.7 126 >204 -33 9.3 Standard multi-grade four-stroke trunk piston engine oil on light fuels.Delo® 400 SAE 40 40 0.8863 136 14.7 108 250 -24 10.1 Monograde of SAE 40 viscosity for four-stroke trunk piston engine on light fuels.Ursa® Extra Duty 40 40 0.89 132 14.0 103 240 –15 7.3 Low ash, two-stroke diesel engine oil. Detroit Diesel.Ursa® Marine 15W-40 15W-40 0.89 102 14.0 139 225 –27 9.0 High-speed diesel engine oil. API CI-4, MAN 271, MB 228.1, Volvo VDS.

Product List

* Depending on the port designated, products may be delivered with or without the (X) identifier (e.g., Taro 40 XL 40X or Taro 40 XL 40). However, the product typical test data both with or without the (X) identifier are miscible and fully compatible.

Additional ServicesFAST™ Service Contracted customers have access to FAST, a comprehensive equipment

condition monitoring program which reports the condition of oil in service and plots the trends of important properties of the oil.

Lubrication Charts Each contracted vessel has a detailed lubrication chart, listing all onboard equipment, lubricants and the suggested application based on manufacturers’ recommendations. Our system enables authorized users to access details on the Internet.

Clarity® Marine This marine synthetic oil and lubricant product line is created with Chevron’s proprietary highly refined base oils and ashless additive technology. Clarity Synthetic AW lines are inherently biodegradable lubricants providing exceptional oxidation stability, water separability, foam suppression and protection against wear, rust and corrosion — the perfect balance between environmental sensitivity and operational cost.

DOT.FAST® Service Contracted customers have access to DOT.FAST, a complete service including the Drip Oil Analyzer for onboard testing of used cylinder drain oil samples (drip oil) and regular laboratory analysis with expert advice from experienced engineers. Drip Oil Analysis is recommended by the major slow-speed engine builders to better understand piston running conditions in the engine.

eWave Authorized users can use this Internet-based ordering system to check prices at different ports, place orders and track deliveries through the various stages of supply.

Reliability-based To protect the equipment that drives your business, Chevron has developed Reliability-based Lubrication (RbL™), a powerful blend of industry knowledge, targeted products and customized services for the marine industry. RbL is a proactive, tangible way to lower your Total Cost of Ownership and maximize your equipment uptime.

LubricationLubricants

GreasesMultifak® EP 0 Lithium Light-brown 370 200 –30 to 120 0 Multi-purpose EP grease for general applications.Multifak® EP 1 Lithium Amber to Brown 325 186 –20 to 125 1 Multi-purpose EP grease for general applications.Multifak® EP 2 Lithium Brown 280 200 –30 to 120 2 Multi-purpose EP grease for general applications.Multifak® EP 3 Lithium Amber to Brown 235 188 –15 to 127 3 Multi-purpose EP grease for general applications.Molytex® EP 2 Lithium grease + MoS2 Dark grey 280 210 –30 to 120 2 Multi-purpose EP grease containing MoS2 as a solid lubricant for high load applications.Starplex® EP 2 Lithium Complex Brown 280 25 –40 to 177 2 High performance EP grease for extreme operating conditions.Starplex® EP 3 Lithium Complex Brown 220–250 >250 –20 to 150 3 High performance EP grease for extreme operating conditions.Texclad® 2 Calcium + graphite + MoS2 Blackish 280 106 –10 to 60 2 Calcium grease with graphite and MoS2 for open gears, wire ropes & general grease points of deck equipment.Ulti-Plex® Synthetic Grease EP Synthetic lithium complex Light tan 315 285 –50 to 230 1.5 Synthetic multi-purpose and high-performance grease for high and low temperature applications.

Base ColorPenetration

worked at 25°CAverage Drop

Point °C

Min./Max. Operating Temp. °C NLGI-Class Description/Application

ISO VGViscosity

IndexFlash

Point °CPour

Point °C Product Description

Kinematic Viscosity mm2/s (cSt) @

100°C40°C

Environmentally Acceptable Lubricants

Clarity® Synthetic EA Grease — — — — — — Anhydrous Calcium Yellow 265-295 >140 –40 to 100 2 Environmentally Acceptable, VGP compliant grease.Clarity® Synthetic EA Gear Oil 100 100 100 18 199 185 –39 — — — — — — Environmentally Acceptable, VGP compliant gear oil.Clarity® Synthetic EA Hydraulic Oil 100 100 100 18.8 210 193 –48 — — — — — — Environmentally Acceptable, VGP compliant hydraulic and stern tube oil.

NLGI-ClassBase Color

Penetration worked at

25°C

Average Drop

Point °C

Min./Max. Operating Temp. °C

Chevron offers the marine industry a complete range of high-performance marine lubricants. Product development is performed at Chevron laboratories, and all marine engine oils complete extensive field trials before introduction.

Chevron products are manufactured to consistently high standards at more than fifty blending plants worldwide. Supply is available at major ports all around the globe. The following table gives a brief description and typical physical properties of each product. For more details,

please refer to individual product information at www.chevronmarineproducts.com, or contact your local Chevron representative or marketing office.

The data contained in the tables above are typical values shown for information only and may vary from location to location. Consult your original equipment manufacturer for recommendations about selecting the appropriate product for your equipment.

Cooling Water TreatmentsHavoline® XLI Anticorrosion Water-based carboxylic acids 1.058 5 – 10 Nil Low Nil Long-life corrosion protection†.Havoline XLC Antifreeze Water-based carboxylic acids 1.113 50 –40 Harmful Nil Long-life protection against freezing,

with mono ethylene glycol (MEG) boiling, corrosion†.

Density at 20°C kg/l

Concentration (In water) %

ToxicClassification

Content on Nitrite; Amine Phosphate

Borate, Silicate Description/ApplicationBaseSeal

Compatibility

No adverse effect on rubber hoses and gasket materials

Freeze Protection

°C

† The proprietary inhibitor technology operates by attacking free radical sites on the metal surface and sealing them before corrosion begins, also providing a very efficient heat transfer.

SAE or ISO VG

Density 15°C kg/l

Viscosity Index Flash Point °C

Pour Point °C

Base No. (BN) Product Description

Kinematic Viscosity mm2/s (cSt) @

100°C40°C

Turbine OilsGST® Premium 32 32 — 31.5 5.4 105 224 –14 — Premium turbine oil for special Mitsubishi application under MS04-MA-CL002.Regal® R&O 32 32 0.86 32 5.5 110 220 –15 — Marine turbine oil, including gas turbines.Regal® R&O 46 46 0.87 46 7.0 110 235 –15 — Marine turbine oil, including gas turbines.Regal® R&O 68 68 0.86 68 9.1 110 245 –15 — Marine turbine oil, including gas turbines.Regal® R&O 100 100 — 95.0 10.8 97 262 –15 — ISO VG 100 turbine oil for steam and hydroelectric turbines.Regal® R&O 320 320 — 304 23.2 95 298 –12 — ISO VG 320 turbine oil for steam and hydroelectric turbines.

Hydraulic OilsClarity® Synth. Hydraulic Oil AW 32 32 — 32.5 7.0 186 228 –48 — Synthetic zinc-free and ashless hydraulic fluid (environmentally sensitive areas) in ISO VG 32.Clarity® Synth. Hydraulic Oil AW 46 46 — 46.5 9.3 186 230 –42 — Synthetic zinc-free and ashless hydraulic fluid (environmentally sensitive areas) in ISO VG 46.Clarity® Synth. Hydraulic Oil AW 68 68 — 68.0 11.4 162 218 –45 — Synthetic zinc-free and ashless hydraulic fluid (environmentally sensitive areas) in ISO VG 68.Clarity® Hydraulic Oil AW 100 100 — 95.0 13.8 145 266 –40 — High value zinc-free hydraulic oil of ISO VG 100.Rando® HDZ 15 15 0.88 16 3.9 140 150 –54 — High VI hydraulic oil.Rando® HDZ 22 22 0.87 22 5.1 160 188 –53 — High VI hydraulic oil.Rando® HDZ 32 32 0.87 32 6.3 153 220 –50 — High VI hydraulic oil.Rando® HDZ 46 46 0.88 46 8.2 153 186 –45 — High VI hydraulic oil.Rando® HDZ 68 68 0.88 68 11.0 154 212 –42 — High VI hydraulic oil.Rando® HDZ 100 100 0.88 100 14.2 145 232 –39 — High VI hydraulic oil.

Gear OilsMeropa® 68 68 0.88 68 8.6 96 225 –30 — Extreme pressure industrial gear lubricant.Meropa® 100 100 0.89 100 11.2 97 230 –27 — Extreme pressure industrial gear lubricant.Meropa® 150 150 0.89 150 14.5 95 230 –24 — Extreme pressure industrial gear lubricant.Meropa® 220 220 0.90 220 18.8 95 240 –21 — Extreme pressure industrial gear lubricant.Meropa® 320 320 0.90 320 24.0 95 240 –21 — Extreme pressure industrial gear lubricant.Meropa® 460 460 0.90 460 30.3 95 250 –15 — Extreme pressure industrial gear lubricant.Meropa® 680 680 0.92 680 37.5 90 250 –15 — Extreme pressure industrial gear lubricant.Meropa® Synlube WS 150 150 1.0527 150 25.0 227 284 –42 — Premium performance synthetic industrial gear oil (PAG based).Meropa® Synlube WS 220 220 1.0575 220 41.8 241 284 –42 — Premium performance synthetic industrial gear oil (PAG based).Meropa® Synlube WS 460 460 1.0667 460 85.3 262 262 –36 — Premium performance synthetic industrial gear oil (PAG based).Meropa® Synlube WS 680 680 1.0729 680 122.2 272 272 –33 — Premium performance synthetic industrial gear oil (PAG based).Meropa® Synthetic EP 150 150 — 142 19.9 162 242 –51 — A synthetic high value gear oil of ISO VG 150.Pinnacle® Marine Gear 220 220 0.89 220 22.7 126 250 –45 — A synthetic high value gear oil of ISO VG 220.

Compressor OilsCapella® HFC 32 32 1.00 32 6.0 135 245 –48 — Refrigeration compressor oil, for chlorine-free refrigerants such as R134a, R404a, and R507.Capella® HFC 55 55 1.01 55 9.1 145 275 –45 — Refrigeration compressor oil, for chlorine-free refrigerants such as R134a, R404a, and R507.Capella® HFC 100 100 1.00 100 11.9 108 290 –42 — Refrigeration compressor oil, for chlorine-free refrigerants such as R134a, R404a, and R507.Capella® Low Temp AB 68 68 0.87 68 6.5 0 190 –42 — Refrigeration compressor oil, for R22 or R502 operating at low evaporator temperatures.Capella® WF 68 68 0.91 68 6.8 22 198 –36 — Refrigeration compressor oil, for ammonia, methylchloride, CO2 and certain types of (H)CFC refrigerant gases.Cetus® DE 100 100 0.96 95.5 10.1 82 232 –30 — Diester based oil for reciprocating air compressors.Cetus® PAG 185 1.06 185 37.0 250 260 –30 — Oil for enclosed hydrocarbon and natural gas compressors.Cetus® PAO 46 46 0.84 46 7.8 136 230 –59 — PAO-based oil for rotary air compressors.Cetus® PAO 68 68 0.85 68 10.3 138 235 –40 — PAO-based oil for both rotary air compressors and turbochargers.Compressor Oil EP VDL 100 100 0.88 100 11.2 97 230 –12 — Mild EP oil for reciprocating air compressors.

Specialty ProductsCylinder Oil W 460 460 — 437 30.4 99 308 -9 — Emulsifying cylinder oil for steam applications and lubrication of worm gears.Delo® 400 LE Synthetic 5W-40 5W-40 0.858 90 14.6 169 222 -47 10.5 High speed diesel engine synthetic oil, API CJ-4, MAN M 3575, MTU Type 2.1.HDAX® 5200 Low Ash Gas Engine Oil SAE 40 40 0.8790 124 13.5 104 230 -30 4.2 Low ash gas engine oil.Rust Proof Compound L — 0.86 — — — min. 64 — — Solvent cutback rust preventative for steel cables and spare parts.Texamatic® 7045E — 0.862 33.8 7.4 194 200 -51 N/A Automatic transmission fluid.Texatherm® 32 32 0.86 32 5.5 106 220 –15 — Heat transfer fluid for temperatures up to 320°C (max. film temperature 340°C).Texatherm® 46 46 0.86 46 6.9 105 235 –15 — Heat transfer fluid for temperatures up to 320°C (max. film temperature 340°C).

SAE or ISO VG

Density 15°C kg/l

Viscosity Index Flash Point °C

Pour Point °C

Base No. (BN) Product Description

Kinematic Viscosity mm2/s (cSt) @

100°C40°C

Slow-speed Engine OilsTaro® Special HT LF 50 0.90 — 19.5 — 280 –12 25 Slow-speed diesel engine cylinder oil for low sulphur application.Taro® Special HT LS 40 50 0.92 247 21.0 100 270 –15 40 Slow-speed diesel engine cylinder oil for low sulphur application. Taro® Special HT 55 50 0.92 247 20.0 105 270 –15 55 Slow-speed diesel engine cylinder oil for high load application. Taro® Special HT 70 50 0.93 247 20.0 105 270 –15 70 Slow-speed diesel engine cylinder oil for high load application.Taro® Special HT 100 50 0.94 — — 105 270 –15 100 Slow-speed diesel engine cylinder oil for low sulphur application (cold corrosion).Taro® Special HT Ultra 60 0.98 — — — min 180 — 140 Slow-speed diesel engine cylinder oil for low sulphur application (cold corrosion).Veritas® 800 Marine 30 30 0.89 111 12.0 95 240 –12 5.4 Slow-speed engine system oil.

Medium-speed Engine OilsDelo® 710 LE SAE 20W-40 20W-40 0.880 136.4 15.4 113 230 –27 typ, –26 max 9.2 Zinc- and chlorine-free high performance multi-grade diesel engine system oil.Delo® 1000 Marine 30 30 0.89 99 12.0 100 240 –18 12 Medium-speed engine oil. Fuel sulphur level up to 1.5%.Delo® 1000 Marine 40 40 0.90 135 14.0 100 240 –18 12 Medium-speed engine oil. Fuel sulphur level up to 1.5%.Delo® SHP SAE 30 30 0.9 — 11.7 — 220 –15 12 High performance SAE 30 diesel engine oil for medium- and high-speed trunk piston diesel engines operating under severe conditions.

Delo® SHP SAE 40 40 0.9 — 14 — 240 –15 12 High performance SAE 40 diesel engine oil for medium- and high-speed trunk piston diesel engines operating under severe conditions.

Taro® 20 DP 30(X)* 30 0.90 95 11.0 100 240 –12 20 Medium-speed engine oil. Fuel sulphur level up to 2%.Taro® 20 DP 40(X)* 40 0.90 135 14.0 100 240 –12 20 Medium-speed engine oil. Fuel sulphur level up to 2%.Taro® 30 DP 30(X)* 30 0.90 95 11.0 100 240 –12 30 Medium-speed engine oil. Fuel sulphur level up to 4%.Taro® 30 DP 40(X)* 40 0.90 135 14.0 100 240 –12 30 Medium-speed engine oil. Fuel sulphur level up to 4%.Taro® 40 XL 40(X)* 40 0.91 135 14.0 100 240 –12 40 Medium-speed engine oil. Fuel sulphur level up to 4.5%.Taro® 50 XL 40(X)* 40 0.92 135 14.0 100 240 –12 50 Medium-speed engine oil. Fuel sulphur level up to 4.5%. For engines with low oil consumption.

High-speed Engine OilsDelo® 400 LE SAE 15W-40 15W-40 0.8806 131 15.7 126 >204 -33 9.3 Standard multi-grade four-stroke trunk piston engine oil on light fuels.Delo® 400 SAE 40 40 0.8863 136 14.7 108 250 -24 10.1 Monograde of SAE 40 viscosity for four-stroke trunk piston engine on light fuels.Ursa® Extra Duty 40 40 0.89 132 14.0 103 240 –15 7.3 Low ash, two-stroke diesel engine oil. Detroit Diesel.Ursa® Marine 15W-40 15W-40 0.89 102 14.0 139 225 –27 9.0 High-speed diesel engine oil. API CI-4, MAN 271, MB 228.1, Volvo VDS.

Product List

* Depending on the port designated, products may be delivered with or without the (X) identifier (e.g., Taro 40 XL 40X or Taro 40 XL 40). However, the product typical test data both with or without the (X) identifier are miscible and fully compatible.

Additional ServicesFAST™ Service Contracted customers have access to FAST, a comprehensive equipment

condition monitoring program which reports the condition of oil in service and plots the trends of important properties of the oil.

Lubrication Charts Each contracted vessel has a detailed lubrication chart, listing all onboard equipment, lubricants and the suggested application based on manufacturers’ recommendations. Our system enables authorized users to access details on the Internet.

Clarity® Marine This marine synthetic oil and lubricant product line is created with Chevron’s proprietary highly refined base oils and ashless additive technology. Clarity Synthetic AW lines are inherently biodegradable lubricants providing exceptional oxidation stability, water separability, foam suppression and protection against wear, rust and corrosion — the perfect balance between environmental sensitivity and operational cost.

DOT.FAST® Service Contracted customers have access to DOT.FAST, a complete service including the Drip Oil Analyzer for onboard testing of used cylinder drain oil samples (drip oil) and regular laboratory analysis with expert advice from experienced engineers. Drip Oil Analysis is recommended by the major slow-speed engine builders to better understand piston running conditions in the engine.

eWave Authorized users can use this Internet-based ordering system to check prices at different ports, place orders and track deliveries through the various stages of supply.

Reliability-based To protect the equipment that drives your business, Chevron has developed Reliability-based Lubrication (RbL™), a powerful blend of industry knowledge, targeted products and customized services for the marine industry. RbL is a proactive, tangible way to lower your Total Cost of Ownership and maximize your equipment uptime.

LubricationLubricants

GreasesMultifak® EP 0 Lithium Light-brown 370 200 –30 to 120 0 Multi-purpose EP grease for general applications.Multifak® EP 1 Lithium Amber to Brown 325 186 –20 to 125 1 Multi-purpose EP grease for general applications.Multifak® EP 2 Lithium Brown 280 200 –30 to 120 2 Multi-purpose EP grease for general applications.Multifak® EP 3 Lithium Amber to Brown 235 188 –15 to 127 3 Multi-purpose EP grease for general applications.Molytex® EP 2 Lithium grease + MoS2 Dark grey 280 210 –30 to 120 2 Multi-purpose EP grease containing MoS2 as a solid lubricant for high load applications.Starplex® EP 2 Lithium Complex Brown 280 25 –40 to 177 2 High performance EP grease for extreme operating conditions.Starplex® EP 3 Lithium Complex Brown 220–250 >250 –20 to 150 3 High performance EP grease for extreme operating conditions.Texclad® 2 Calcium + graphite + MoS2 Blackish 280 106 –10 to 60 2 Calcium grease with graphite and MoS2 for open gears, wire ropes & general grease points of deck equipment.Ulti-Plex® Synthetic Grease EP Synthetic lithium complex Light tan 315 285 –50 to 230 1.5 Synthetic multi-purpose and high-performance grease for high and low temperature applications.

Base ColorPenetration

worked at 25°CAverage Drop

Point °C

Min./Max. Operating Temp. °C NLGI-Class Description/Application

ISO VGViscosity

IndexFlash

Point °CPour

Point °C Product Description

Kinematic Viscosity mm2/s (cSt) @

100°C40°C

Environmentally Acceptable Lubricants

Clarity® Synthetic EA Grease — — — — — — Anhydrous Calcium Yellow 265-295 >140 –40 to 100 2 Environmentally Acceptable, VGP compliant grease.Clarity® Synthetic EA Gear Oil 100 100 100 18 199 185 –39 — — — — — — Environmentally Acceptable, VGP compliant gear oil.Clarity® Synthetic EA Hydraulic Oil 100 100 100 18.8 210 193 –48 — — — — — — Environmentally Acceptable, VGP compliant hydraulic and stern tube oil.

NLGI-ClassBase Color

Penetration worked at

25°C

Average Drop

Point °C

Min./Max. Operating Temp. °C

Chevron offers the marine industry a complete range of high-performance marine lubricants. Product development is performed at Chevron laboratories, and all marine engine oils complete extensive field trials before introduction.

Chevron products are manufactured to consistently high standards at more than fifty blending plants worldwide. Supply is available at major ports all around the globe. The following table gives a brief description and typical physical properties of each product. For more details,

please refer to individual product information at www.chevronmarineproducts.com, or contact your local Chevron representative or marketing office.

The data contained in the tables above are typical values shown for information only and may vary from location to location. Consult your original equipment manufacturer for recommendations about selecting the appropriate product for your equipment.

Cooling Water TreatmentsHavoline® XLI Anticorrosion Water-based carboxylic acids 1.058 5 – 10 Nil Low Nil Long-life corrosion protection†.Havoline XLC Antifreeze Water-based carboxylic acids 1.113 50 –40 Harmful Nil Long-life protection against freezing,

with mono ethylene glycol (MEG) boiling, corrosion†.

Density at 20°C kg/l

Concentration (In water) %

ToxicClassification

Content on Nitrite; Amine Phosphate

Borate, Silicate Description/ApplicationBaseSeal

Compatibility

No adverse effect on rubber hoses and gasket materials

Freeze Protection

°C

† The proprietary inhibitor technology operates by attacking free radical sites on the metal surface and sealing them before corrosion begins, also providing a very efficient heat transfer.

SAE or ISO VG

Density 15°C kg/l

Viscosity Index Flash Point °C

Pour Point °C

Base No. (BN) Product Description

Kinematic Viscosity mm2/s (cSt) @

100°C40°C

Turbine OilsGST® Premium 32 32 — 31.5 5.4 105 224 –14 — Premium turbine oil for special Mitsubishi application under MS04-MA-CL002.Regal® R&O 32 32 0.86 32 5.5 110 220 –15 — Marine turbine oil, including gas turbines.Regal® R&O 46 46 0.87 46 7.0 110 235 –15 — Marine turbine oil, including gas turbines.Regal® R&O 68 68 0.86 68 9.1 110 245 –15 — Marine turbine oil, including gas turbines.Regal® R&O 100 100 — 95.0 10.8 97 262 –15 — ISO VG 100 turbine oil for steam and hydroelectric turbines.Regal® R&O 320 320 — 304 23.2 95 298 –12 — ISO VG 320 turbine oil for steam and hydroelectric turbines.

Hydraulic OilsClarity® Synth. Hydraulic Oil AW 32 32 — 32.5 7.0 186 228 –48 — Synthetic zinc-free and ashless hydraulic fluid (environmentally sensitive areas) in ISO VG 32.Clarity® Synth. Hydraulic Oil AW 46 46 — 46.5 9.3 186 230 –42 — Synthetic zinc-free and ashless hydraulic fluid (environmentally sensitive areas) in ISO VG 46.Clarity® Synth. Hydraulic Oil AW 68 68 — 68.0 11.4 162 218 –45 — Synthetic zinc-free and ashless hydraulic fluid (environmentally sensitive areas) in ISO VG 68.Clarity® Hydraulic Oil AW 100 100 — 95.0 13.8 145 266 –40 — High value zinc-free hydraulic oil of ISO VG 100.Rando® HDZ 15 15 0.88 16 3.9 140 150 –54 — High VI hydraulic oil.Rando® HDZ 22 22 0.87 22 5.1 160 188 –53 — High VI hydraulic oil.Rando® HDZ 32 32 0.87 32 6.3 153 220 –50 — High VI hydraulic oil.Rando® HDZ 46 46 0.88 46 8.2 153 186 –45 — High VI hydraulic oil.Rando® HDZ 68 68 0.88 68 11.0 154 212 –42 — High VI hydraulic oil.Rando® HDZ 100 100 0.88 100 14.2 145 232 –39 — High VI hydraulic oil.

Gear OilsMeropa® 68 68 0.88 68 8.6 96 225 –30 — Extreme pressure industrial gear lubricant.Meropa® 100 100 0.89 100 11.2 97 230 –27 — Extreme pressure industrial gear lubricant.Meropa® 150 150 0.89 150 14.5 95 230 –24 — Extreme pressure industrial gear lubricant.Meropa® 220 220 0.90 220 18.8 95 240 –21 — Extreme pressure industrial gear lubricant.Meropa® 320 320 0.90 320 24.0 95 240 –21 — Extreme pressure industrial gear lubricant.Meropa® 460 460 0.90 460 30.3 95 250 –15 — Extreme pressure industrial gear lubricant.Meropa® 680 680 0.92 680 37.5 90 250 –15 — Extreme pressure industrial gear lubricant.Meropa® Synlube WS 150 150 1.0527 150 25.0 227 284 –42 — Premium performance synthetic industrial gear oil (PAG based).Meropa® Synlube WS 220 220 1.0575 220 41.8 241 284 –42 — Premium performance synthetic industrial gear oil (PAG based).Meropa® Synlube WS 460 460 1.0667 460 85.3 262 262 –36 — Premium performance synthetic industrial gear oil (PAG based).Meropa® Synlube WS 680 680 1.0729 680 122.2 272 272 –33 — Premium performance synthetic industrial gear oil (PAG based).Meropa® Synthetic EP 150 150 — 142 19.9 162 242 –51 — A synthetic high value gear oil of ISO VG 150.Pinnacle® Marine Gear 220 220 0.89 220 22.7 126 250 –45 — A synthetic high value gear oil of ISO VG 220.

Compressor OilsCapella® HFC 32 32 1.00 32 6.0 135 245 –48 — Refrigeration compressor oil, for chlorine-free refrigerants such as R134a, R404a, and R507.Capella® HFC 55 55 1.01 55 9.1 145 275 –45 — Refrigeration compressor oil, for chlorine-free refrigerants such as R134a, R404a, and R507.Capella® HFC 100 100 1.00 100 11.9 108 290 –42 — Refrigeration compressor oil, for chlorine-free refrigerants such as R134a, R404a, and R507.Capella® Low Temp AB 68 68 0.87 68 6.5 0 190 –42 — Refrigeration compressor oil, for R22 or R502 operating at low evaporator temperatures.Capella® WF 68 68 0.91 68 6.8 22 198 –36 — Refrigeration compressor oil, for ammonia, methylchloride, CO2 and certain types of (H)CFC refrigerant gases.Cetus® DE 100 100 0.96 95.5 10.1 82 232 –30 — Diester based oil for reciprocating air compressors.Cetus® PAG 185 1.06 185 37.0 250 260 –30 — Oil for enclosed hydrocarbon and natural gas compressors.Cetus® PAO 46 46 0.84 46 7.8 136 230 –59 — PAO-based oil for rotary air compressors.Cetus® PAO 68 68 0.85 68 10.3 138 235 –40 — PAO-based oil for both rotary air compressors and turbochargers.Compressor Oil EP VDL 100 100 0.88 100 11.2 97 230 –12 — Mild EP oil for reciprocating air compressors.

Specialty ProductsCylinder Oil W 460 460 — 437 30.4 99 308 -9 — Emulsifying cylinder oil for steam applications and lubrication of worm gears.Delo® 400 LE Synthetic 5W-40 5W-40 0.858 90 14.6 169 222 -47 10.5 High speed diesel engine synthetic oil, API CJ-4, MAN M 3575, MTU Type 2.1.HDAX® 5200 Low Ash Gas Engine Oil SAE 40 40 0.8790 124 13.5 104 230 -30 4.2 Low ash gas engine oil.Rust Proof Compound L — 0.86 — — — min. 64 — — Solvent cutback rust preventative for steel cables and spare parts.Texamatic® 7045E — 0.862 33.8 7.4 194 200 -51 N/A Automatic transmission fluid.Texatherm® 32 32 0.86 32 5.5 106 220 –15 — Heat transfer fluid for temperatures up to 320°C (max. film temperature 340°C).Texatherm® 46 46 0.86 46 6.9 105 235 –15 — Heat transfer fluid for temperatures up to 320°C (max. film temperature 340°C).

SAE or ISO VG

Density 15°C kg/l

Viscosity Index Flash Point °C

Pour Point °C

Base No. (BN) Product Description

Kinematic Viscosity mm2/s (cSt) @

100°C40°C

Slow-speed Engine OilsTaro® Special HT LF 50 0.90 — 19.5 — 280 –12 25 Slow-speed diesel engine cylinder oil for low sulphur application.Taro® Special HT LS 40 50 0.92 247 21.0 100 270 –15 40 Slow-speed diesel engine cylinder oil for low sulphur application. Taro® Special HT 55 50 0.92 247 20.0 105 270 –15 55 Slow-speed diesel engine cylinder oil for high load application. Taro® Special HT 70 50 0.93 247 20.0 105 270 –15 70 Slow-speed diesel engine cylinder oil for high load application.Taro® Special HT 100 50 0.94 — — 105 270 –15 100 Slow-speed diesel engine cylinder oil for low sulphur application (cold corrosion).Taro® Special HT Ultra 60 0.98 — — — min 180 — 140 Slow-speed diesel engine cylinder oil for low sulphur application (cold corrosion).Veritas® 800 Marine 30 30 0.89 111 12.0 95 240 –12 5.4 Slow-speed engine system oil.

Medium-speed Engine OilsDelo® 710 LE SAE 20W-40 20W-40 0.880 136.4 15.4 113 230 –27 typ, –26 max 9.2 Zinc- and chlorine-free high performance multi-grade diesel engine system oil.Delo® 1000 Marine 30 30 0.89 99 12.0 100 240 –18 12 Medium-speed engine oil. Fuel sulphur level up to 1.5%.Delo® 1000 Marine 40 40 0.90 135 14.0 100 240 –18 12 Medium-speed engine oil. Fuel sulphur level up to 1.5%.Delo® SHP SAE 30 30 0.9 — 11.7 — 220 –15 12 High performance SAE 30 diesel engine oil for medium- and high-speed trunk piston diesel engines operating under severe conditions.

Delo® SHP SAE 40 40 0.9 — 14 — 240 –15 12 High performance SAE 40 diesel engine oil for medium- and high-speed trunk piston diesel engines operating under severe conditions.

Taro® 20 DP 30(X)* 30 0.90 95 11.0 100 240 –12 20 Medium-speed engine oil. Fuel sulphur level up to 2%.Taro® 20 DP 40(X)* 40 0.90 135 14.0 100 240 –12 20 Medium-speed engine oil. Fuel sulphur level up to 2%.Taro® 30 DP 30(X)* 30 0.90 95 11.0 100 240 –12 30 Medium-speed engine oil. Fuel sulphur level up to 4%.Taro® 30 DP 40(X)* 40 0.90 135 14.0 100 240 –12 30 Medium-speed engine oil. Fuel sulphur level up to 4%.Taro® 40 XL 40(X)* 40 0.91 135 14.0 100 240 –12 40 Medium-speed engine oil. Fuel sulphur level up to 4.5%.Taro® 50 XL 40(X)* 40 0.92 135 14.0 100 240 –12 50 Medium-speed engine oil. Fuel sulphur level up to 4.5%. For engines with low oil consumption.

High-speed Engine OilsDelo® 400 LE SAE 15W-40 15W-40 0.8806 131 15.7 126 >204 -33 9.3 Standard multi-grade four-stroke trunk piston engine oil on light fuels.Delo® 400 SAE 40 40 0.8863 136 14.7 108 250 -24 10.1 Monograde of SAE 40 viscosity for four-stroke trunk piston engine on light fuels.Ursa® Extra Duty 40 40 0.89 132 14.0 103 240 –15 7.3 Low ash, two-stroke diesel engine oil. Detroit Diesel.Ursa® Marine 15W-40 15W-40 0.89 102 14.0 139 225 –27 9.0 High-speed diesel engine oil. API CI-4, MAN 271, MB 228.1, Volvo VDS.

Product List

* Depending on the port designated, products may be delivered with or without the (X) identifier (e.g., Taro 40 XL 40X or Taro 40 XL 40). However, the product typical test data both with or without the (X) identifier are miscible and fully compatible.

Additional ServicesFAST™ Service Contracted customers have access to FAST, a comprehensive equipment

condition monitoring program which reports the condition of oil in service and plots the trends of important properties of the oil.

Lubrication Charts Each contracted vessel has a detailed lubrication chart, listing all onboard equipment, lubricants and the suggested application based on manufacturers’ recommendations. Our system enables authorized users to access details on the Internet.

Clarity® Marine This marine synthetic oil and lubricant product line is created with Chevron’s proprietary highly refined base oils and ashless additive technology. Clarity Synthetic AW lines are inherently biodegradable lubricants providing exceptional oxidation stability, water separability, foam suppression and protection against wear, rust and corrosion — the perfect balance between environmental sensitivity and operational cost.

DOT.FAST® Service Contracted customers have access to DOT.FAST, a complete service including the Drip Oil Analyzer for onboard testing of used cylinder drain oil samples (drip oil) and regular laboratory analysis with expert advice from experienced engineers. Drip Oil Analysis is recommended by the major slow-speed engine builders to better understand piston running conditions in the engine.

eWave Authorized users can use this Internet-based ordering system to check prices at different ports, place orders and track deliveries through the various stages of supply.

Reliability-based To protect the equipment that drives your business, Chevron has developed Reliability-based Lubrication (RbL™), a powerful blend of industry knowledge, targeted products and customized services for the marine industry. RbL is a proactive, tangible way to lower your Total Cost of Ownership and maximize your equipment uptime.

LubricationLubricants

GreasesMultifak® EP 0 Lithium Light-brown 370 200 –30 to 120 0 Multi-purpose EP grease for general applications.Multifak® EP 1 Lithium Amber to Brown 325 186 –20 to 125 1 Multi-purpose EP grease for general applications.Multifak® EP 2 Lithium Brown 280 200 –30 to 120 2 Multi-purpose EP grease for general applications.Multifak® EP 3 Lithium Amber to Brown 235 188 –15 to 127 3 Multi-purpose EP grease for general applications.Molytex® EP 2 Lithium grease + MoS2 Dark grey 280 210 –30 to 120 2 Multi-purpose EP grease containing MoS2 as a solid lubricant for high load applications.Starplex® EP 2 Lithium Complex Brown 280 25 –40 to 177 2 High performance EP grease for extreme operating conditions.Starplex® EP 3 Lithium Complex Brown 220–250 >250 –20 to 150 3 High performance EP grease for extreme operating conditions.Texclad® 2 Calcium + graphite + MoS2 Blackish 280 106 –10 to 60 2 Calcium grease with graphite and MoS2 for open gears, wire ropes & general grease points of deck equipment.Ulti-Plex® Synthetic Grease EP Synthetic lithium complex Light tan 315 285 –50 to 230 1.5 Synthetic multi-purpose and high-performance grease for high and low temperature applications.

Base ColorPenetration

worked at 25°CAverage Drop

Point °C

Min./Max. Operating Temp. °C NLGI-Class Description/Application

ISO VGViscosity

IndexFlash

Point °CPour

Point °C Product Description

Kinematic Viscosity mm2/s (cSt) @

100°C40°C

Environmentally Acceptable Lubricants

Clarity® Synthetic EA Grease — — — — — — Anhydrous Calcium Yellow 265-295 >140 –40 to 100 2 Environmentally Acceptable, VGP compliant grease.Clarity® Synthetic EA Gear Oil 100 100 100 18 199 185 –39 — — — — — — Environmentally Acceptable, VGP compliant gear oil.Clarity® Synthetic EA Hydraulic Oil 100 100 100 18.8 210 193 –48 — — — — — — Environmentally Acceptable, VGP compliant hydraulic and stern tube oil.

NLGI-ClassBase Color

Penetration worked at

25°C

Average Drop

Point °C

Min./Max. Operating Temp. °C

The complete range of high-performance marine lubricants

Comparative Viscosity Classifications

42

40

38

36

34

32

30

28

26

24

22

20

18

16

14

12

10

8

6

4

2

850

775

700

625

550

500

450

400

365

315

280

240

205

175

140

115

85

60

40

20

10

ISO VG Grade SAE Gear Viscosity Grade

SAE Viscosity Grade

Common Base Oil Nomenclature

460

320

220

150

100

68

46

32

22

15

10

140

90

85W

80W

75W

50

40

30

20

10W

5W

150 Brt.

650 N

500 N

300 N

200 N

100 N

mm

2 ⁄s a

t 40°

C

mm

2 ⁄s a

t 100

°C

GermanyChevron Products Germany Inc.Jungfernstieg 4920354 HamburgGermanyTel: +49 40 349 710 00Email: cmlgermany@chevron.com SingaporeChevron Singapore Pte. Ltd.Chevron House30 Raffles Place #21-01Singapore 048622Tel: +65 6318 1000Email: cmlsingapore@chevron.com

GreeceChevron Marine Products Hellas S.A.70, Filonos Street185 35 PiraeusAthens, GreeceTel: +30 210 9473000Email: cmlmed@chevron.com

United KingdomChevron Products UK Limited1 Westferry Circus, Canary WharfLondon E14 4HAUnited KingdomTel: +44 20 7719 3384Email: cmlukl@chevron.com

Hong KongChevron Hong Kong Ltd.15/F., Tower BManulife Financial Centre223-231 Wai Yip StreetKwun Tong, Kowloon, Hong KongTel: +852 2802 8338Email: cmlhkl@chevron.com

United StatesChevron Marine Products LLC9401 Williamsburg Plaza, Suite 201Louisville, KY 40222, USATel. Order Desk: +1 800 283 9582Tel. (outside USA): +1 502 420 7051Email: cmlusl@chevron.com

For more information, please contact any Chevron Marine Lubricants sales office:

Or visit our website: www.chevronmarineproducts.com

Always confirm that the product selected is consistent with the original equipment manufacturer’s recommendation for the equipment operating conditions and customer’s maintenance practices.

© 2017 Chevron Marine Products LLC. All rights reserved. All trademarks are the property of Chevron Intellectual Property LLC or their respective owners. IDU179869 06/17  R-258 (6-17)

marine lubricants product list

The complete range of high-performance marine lubricants

Comparative Viscosity Classifications

42

40

38

36

34

32

30

28

26

24

22

20

18

16

14

12

10

8

6

4

2

850

775

700

625

550

500

450

400

365

315

280

240

205

175

140

115

85

60

40

20

10

ISO VG Grade SAE Gear Viscosity Grade

SAE Viscosity Grade

Common Base Oil Nomenclature

460

320

220

150

100

68

46

32

22

15

10

140

90

85W

80W

75W

50

40

30

20

10W

5W

150 Brt.

650 N

500 N

300 N

200 N

100 N

mm

2 ⁄s a

t 40°

C

mm

2 ⁄s a

t 100

°C

GermanyChevron Products Germany Inc.Jungfernstieg 4920354 HamburgGermanyTel: +49 40 349 710 00Email: cmlgermany@chevron.com SingaporeChevron Singapore Pte. Ltd.Chevron House30 Raffles Place #21-01Singapore 048622Tel: +65 6318 1000Email: cmlsingapore@chevron.com

GreeceChevron Marine Products Hellas S.A.70, Filonos Street185 35 PiraeusAthens, GreeceTel: +30 210 9473000Email: cmlmed@chevron.com

United KingdomChevron Products UK Limited1 Westferry Circus, Canary WharfLondon E14 4HAUnited KingdomTel: +44 20 7719 3384Email: cmlukl@chevron.com

Hong KongChevron Hong Kong Ltd.15/F., Tower BManulife Financial Centre223-231 Wai Yip StreetKwun Tong, Kowloon, Hong KongTel: +852 2802 8338Email: cmlhkl@chevron.com

United StatesChevron Marine Products LLC9401 Williamsburg Plaza, Suite 201Louisville, KY 40222, USATel. Order Desk: +1 800 283 9582Tel. (outside USA): +1 502 420 7051Email: cmlusl@chevron.com

For more information, please contact any Chevron Marine Lubricants sales office:

Or visit our website: www.chevronmarineproducts.com

Always confirm that the product selected is consistent with the original equipment manufacturer’s recommendation for the equipment operating conditions and customer’s maintenance practices.

© 2017 Chevron Marine Products LLC. All rights reserved. All trademarks are the property of Chevron Intellectual Property LLC or their respective owners. IDU179869 06/17  R-258 (6-17)

marine lubricants product list