Upload
mada009
View
21
Download
1
Embed Size (px)
DESCRIPTION
Geplast ArGeTon Facade
Citation preview
ArGeTon®
THE TERRACOTTA Façade
SuStainable elegance
The ArGeTon® façade enhances new and modern buildings
and lends refurbished properties a contemporary character.
Combined with steel, glass or wood, it is elegant, natural and
timelessly perfect. ArGeTon® façades also keep their good
looks for decades:
· A clever water runoff system avoids the accumulation of dirt.
· The ceramic colours remain constant and strong even when exposed to tough weathering conditions.
· The façade is acknowledged to be particularly fire-resistant.
· The joint profile of the façade protects against lateral shift of the façade tiles, the penetration of impact rain and rattling of the places in the wind.
The building of the Council of Europe in Strasbourg – the winner of two awards – was
clad with a chocolate brown ArGeTon® façade.
The success is based on dialogue and expertise, which is why in future too you will be advised exclusively by experts. We prepare the best
solution for every project working in cooperation with you. We look forward to the tasks and challenges you have in store for us.
Today, almost 30 years later, the name
ArGeTon® stands for quality, aesthetics and
creativity. The success story is based on a
systematic and future-oriented product de-
velopment, service-oriented sales and sys-
tematic quality assurance of a large group.
ArGeTon® is backed by Wienerberger AG –
the largest manufacturer of bricks in the world.
ArGeTon® TERRACOTTA Façade
ArGeTon® was developed as a back-ventilated façade
cladding made from clay at the beginning of the 1980’s.
The aim was to create a timeless modern façade with the
unmistakable character of clay as a natural product.
2 3
Production
In a roller kiln conceived especially for this purpose, the extruded façade
tiles are fired at high temperatures, individually and carefully coordi-
nated depending on their respective shades.
The exact dimensioning of the ArGeTon® façade tiles is guaranteed by
a special calibrating facility – the essential element of the precise joint
grid which lends the façade its overall impression.
TESTED SECURITY: The ArGeTon® fAçADE IS ball-Shooting reSiStant
ArGeTon® GmbH was the first manufacture of ceramic façade tiles to
pass the test for ball-throwing safety in compliance with DIN 18032-3.
The high strength of the ArGeTon® façade tiles and the new B/85 fix-
ing clips, which can be attached to the carrier rails without additional
tools, are impressive features. The ArGeTon® façades easily maintains
its condition, making the ceramic façade particularly suitable for use on
public buildings such as schools.
ArGeTon® Product range
taMPaThe classic façade tiles for a clean-
cut building appearance: clear and
simple in form and without grooves.
terZo 2Two false joints of different width
in the surface create an interesting
façade look.
terZoLike strips or small straps: a special
impression is created by two false
joints.
terZo 3A unique joint pattern created by
three false joints in the surface.
lineo 4A stylish horizontal linear structure
created by four 3 mm deep grooves.
lineo 99 grooves in the surface for an ac-
centuated and unusual façade look.
Other surfaces and colours can of course be provided. Speak to us.
4 5
Full ceraMic cornerStraight-line, clean cornering for a perfect terracotta façade
down to the very last detail.
curVed barroRounded outer and inner corners, convex and concave
façade areas, the round cladding of a bay: varied design
ideas put impressively into practice.
elliPtic barroElliptic barros can be used as sun shade and screen. As a
design element they serve to open up the façade.
danZaThe overlap of the individual panels creates a fascinating
play of shadow, depending on how the light falls on the
building façade.
argelite®
Perfect looks combined with simple and secure assembly.
The ArGeLite® panel is very well suited to building
refurbishments in view of its optimised weight.
Sun Screen barroIn addition to its function as an architectural design element
the brick bar can also be used as a sun shade and screen.
The sand-coloured iridescent engobe surface is responsible for
the animated structure of this administrative building in Gooiland,
Netherlands.
architectural TOUR
The special glazed blue colour of the façade tiles lends
an individually cool and elegant look to this modern
administrative complex in Eindhoven, Netherlands.
The two buildings stand as a landmark in Klaipedia, Lithuania’s port on the Baltic. The warm
and strong natural red of the façade creates a visual bridge to the roofs of the old city.
12 13
Characteristic element of the spacious residential development
in Bulgaria‘s Black Sea coast in Lozenec is the pearl-white
ceramic façade combined with typical wood elements.
Tradition and the modern are elegantly combined
in Dongen, Netherlands: the lightness of the
volcanic grey shaded façade reflects the colour
shade of the old mill.
Architects chose façade tiles in natural red for an administrative building in
Shanghai, China, thereby creating a harmonious and aesthetic bridge between
modern and old architecture.
The combination of curved Barro elements and glass lend
the business complex in Constance, Germany, a visually
attractive transparency. The natural red colour successfully
creates a link to the historical adjacent property.
Noble, pure and transparent – the volcanic grey façade
of the administrative building in Silkeborg, Denmark.
8 9
ArGeTon® Product MatrixThe selection of forms, formats and surfaces permits a design that will meet your personal requirements, permitting a tasteful combination
with modern building materials such as steel or glass. Subtlety, elegance and timeless perfection permeate the range.
general informationTile thickness: 30 mm ± 1,5 mmStandard lengths: 400 – 1,500 mmWeight per m2: 42.0 – 44.0 kg The dimensions stated are centre-to-centre dimensions and refer to the centre- joint measurement both in terms of height and width.
notesIn addition to standard lengths, variable lengths are possible. The product qual-ity corresponds to at least EN 1304. Points of friction, e.g. through manufacture or transport are of no relevance to the standard values. Small colour deviations result from the production process. Please observe the important regulations and standards on the processing of ArGeTon® panels.
TAMPA TERZO LINEO DANZA ArGeLite® BARRO CORNER
centre to centre
distance
TAMPA TERZO TERZO 1 TERZO 2 TERZO 3 LINEO 4 LINEO 9 DANZA ArGeLite®
D=24 mmØ 50/50 mmor 69/69 mm,
max. L=1,500 mm
90/90 mm or 120/120 mm,
max. L=600 mm
Grid150 mm
●max.
L=600 mm
●max.
L=600 mm
150x50 mmmax. L=1,200 mm
Grid175 mm
●max.
L=600 mm
Grid187.5 mm
●max.
L=600 mm
100x50 mmmax. L=1,200 mm
Grid200 mm
●max.
L=1,200 mm
●max.
L=1,200 mm
●max.
L=1,200 mm
●max.
L=1,200 mm
●max.
L=800 mm
Grid212.5 mm
●max.
L=1,200 mm
Grid225 mm
●max.
L=1,200 mm
●max.
L=1,200 mm
●max.
L=1,200 mm
●max.
L=1,200 mm
Grid237.5 mm
●max.
L=1,500 mm
Grid243.5 mm
●max.
L=1,500 mm
●max.
L=1,500 mm
Grid250 mm
●max.
L=1,500 mm
●max.
L=1,500 mm
●max.
L=1,500 mm
●max.
L=800 mm
Grid257 mm
●max.
L=1,500 mm
Grid275 mm
●max.
L=1,500 mm
Grid300 mm
●max.
L=1,500 mm
●max.
L=800 mm
Grid400 mm
●max.
L=1,500 mm
Grid500 mm
●max.
L=1,500 mmD=35 mm
ArGeTon® colourS and SurFaceS
Apricot-beige Salmon pastel Tuscan red Natural red Red brown
Glacier blue Light grey Platinum grey Iron grey Volcano grey
Standard colourS
The thirteen known colours stand for a natural and subtle colouration of the façade.
Pearlwhite Sand Sahara
engobeS/glaZeS
In addition to the standard colours, engobes, special engobes and glazes can also be realised. They primarily appeal to colour-conscious designers. Luminous colour glazes and metallic effects are also possible.
grey glazed blue glazed brown glazed black glazed
white glazed yellow glazed orange glazed red glazed green glazed
natural texturedbrushed
10 11
SurFaceS
All colours, engobes and glazes are available in different surface versions. Every façade is therefore unique with an individual appearance.
ArGeTon® TECHnOlOGYaluMiniuM SubStructure, Vertical
Cleats of aluminium are attached to the existing wall by
means of approved pins in horizontal centre distance,
and with the spacing necessary for structural stability. The
occurrence of fixed and sliding points must be ensured here
in compliance with DIN 18516, Part 1.
Vertical aluminium carrier profiles are inserted into the cleats (a special clamping
spring enables exact adjustment). After alignment of the carrier profile, it is attached
with a blank rivet. The T profiles are pre-holed preferably to the façade tiles pattern.
ArGeTon® façade tiles are attached to the substructure with special clips at four
points without being forced in, by means of self-tapping stainless-steel screws or
aluminium hollow-drawn rivets. The procedure starts with the bottom row.
All information in mm.
Middle cliP
2022,5
63,5
bottoM cliP
22,5
42,5
20
toP cliP
55
22 20
aluMiniuM t SubStructure with Vertical carrier railS
ArGeTon® TECHnOlOGYaluMiniuM SubStructure, horiZontal
All information in mm.
The substructure consists of vertical angled base carrier
profiles, which are anchored at the building with wall
cleats. Horizontal carrier rails of aluminium are placed
on the base substructure.
The distance depends on the height in the grid of the
ArGeTon® façade tiles, which are fastened with special
brackets to the horizontal carrier rails.
aluMiniuM t SubStructure with horiZontal carrier railS
toP cliP
2034
40
bottoM cliP
2031
48
Middle cliP
2029,5
84,8
horiZontal carrier rail
25
45
25
35
12 13
ArGeTon® TECHnOlOGYJoint and corner ProFileS
aluMiniuM corner ProFile For argeton® clay tile
50
15
30
20
4
59
8
20
340
43
340
43
340
43
56
4
20
43
62
notes· The joint profiles of aluminium are available in 3 m length in the
colours RAL 1015 light ivory, RAL 7005 mouse grey and RAL
8004 copper brown. Special colours available on request.
· The aluminium corner profiles are untreated, anodised or
coloured using RAL colours depending on requirements.
aluMiniuM SPring ProFile
aluMiniuM drainage abutMent ProFile
aluMiniuM Joint ProFile For argeton® clay tile
14 15
ArGeTon® TECHnOlOGYSun Screen barro
thermal seperation
horizontal carrier profil
BARRO supporting profile
ArGeTon® façade tile
ArGeTon® BARRO
clamp
abutment drainage profile
single support
BARRO neoprene pad, 2 mm, elastic
box section (spans floor to floor or across the window; dimensions according to the static calculation; with lower span widths also a flat section may be possible)
F insertion profile
sheet, canted
thermal separationcleat
ArGeTon® support
ArGeTon® BARRO with support profile and fixing screw
inserting the BARRO with the support profile and the fastened holding screw
putting the support on the vertical profile (box section), including the distance piece,...
..., and fixing with a counter-sunk screw
BARRO security clip
fitting the BARRO security clip
The BARRO supports in- cluding the distance pieces should be pre-assembled on the vertical profile! va
riabl
e50
ArGeTon®
ArGeTon® GmbHOldenburger Allee 26 · D-30659 HannoverPhone.: +49 (0) 511- 610 70 820 · Fax: +49 (0) 511- 61 44 [email protected] · www.argeton.com
06/
10 2
0.0
w
ww
.i-de
.de