9
.en Simple and efficient.

General Catalogue SOTKON ENG v1 WEB

Embed Size (px)

Citation preview

Page 1: General Catalogue SOTKON ENG v1 WEB

.en

Simple andefficient.

Page 2: General Catalogue SOTKON ENG v1 WEB

“More than 20.000Containers in 20 countries...”

About Us

ABOUT SOTKONSotkon is the market leader in Iberia and has a significant global presence in underground containers market for the selective collection of household refuse. The company prides itself on the sustainable pathway it has followed in terms of growth over the last 20 years.

HISTORYThe first idea for an underground container was conceived in the early nineties and led to an innovative system. The company currently holds various patents of underground containers systems.

Sotkon began the international expansion based in the concept implemented in Spain and Portugal. Today, the Sotkon Group is present in several countries and has more than 20,000 containers installed in about 20 countries.

VISION, MISSION AND VALUESWe are aiming to become the world’s most recognized company in the underground containers sector, providing simple and efficient solutions to users who value and care about sustainability.

We develop attractive and innovative solutions for waste disposal that contribute to an efficient and sustainable world.

In Sotkon, we build our future based on the values of trust, ambition and social responsibility.

Page 3: General Catalogue SOTKON ENG v1 WEB

UndergroundContainers

The underground container collection systems have more capacity and hide the waste from the surface, reducing the visual and environmental impacts caused by the traditional surface containers. These systems will reduce the number of the collection vehicles tours and consequently the costs of the operation because of their increased deposition capacity. The energy consumed and the need for hand labour is reduced improving the working conditions during collection.

Perfect integrationwith the environment.

Glass

Packaging

Paper/Cardboard

Oil

Organic

General Waste

2 Easyto use1 Easy

to install

Standard SideLoading

CompactMetallic

Compact

Page 4: General Catalogue SOTKON ENG v1 WEB

Undergroundvs Surface

The underground systems allow to use less operators to collect larger capacity containers, adding a higher level of profitability to the operation. The Standard Sotkon system allows to collect a 3m3 underground container with only a single operator using the traditional rear loading collection truck with a small crane on top of the truck body. The Sotkon compact systems makes possible for a single operator to collect the container with a larger capacity crane installed on a truck. A single operator inside the truck cabin can control all the movements of the 3m3 side loading Sotkon underground container.

The Sotkon underground containers are harmoniously integrated with their surroundings, which encourages increased and better separation. By separating waste at source, the volume of recyclables is increased and costs of further separation are reduced.

The protection against the waste interaction with excessive heat and animals contributes to the reduction of unpleasant odours and the risk of disease transmission, favouring a good environment and public health.

Page 5: General Catalogue SOTKON ENG v1 WEB

AdvantagesUnderground

URBAN INTEGRATIONFull integration with the surroundings, maintaining a pleasant aspect essential for a correct waste disposal.

HYGIENEAseptic system that isolates the waste from heat and animals, preventing disease transmissions.

COST REDUCTION – COLLECTIONEconomic advantages are evident with operational cost reductions of over 30% compared to surface systems.

USEFUL TECHNOLOGYEnables the integration of electronic systems for container filling monitoring and access control to introduce “PAYT” systems (Pay-As -You-Throw).

REDUCED MAINTENANCE System without complex mechanisms and easy to maintain.

DURABLEThe materials used, surface treatment, quality of manufacture and design gives the Sotkon system a long life. Critical to this design is the integral seal and channel which eliminates water ingress

INCREASE RECYCLINGBy separating waste at source, the volume of recyclables is increased and costs of further separation are reduced. The concept of separation at source is well accepted.

A simple system.Integrated into the environment.Easy to maintain.Economic.Resistant.Attractive.

FLEXIBLE AND ADAPTIVEIt is extremely easy to overcome any barriers created by underground cables or pipes. Steep gradients or undulating ground do not present a problem for Sotkon.

Page 6: General Catalogue SOTKON ENG v1 WEB

UndergroundSotkon

The Sotkon systems are based on a simple concept.

On the surface are placed discrete intake columns, produced in stainless steel that guarantees maximum durability and corrosion resistance. The intake columns are placed on a pedestrian platform integrated with the surrounding area. A concrete bunker is placed below the pedestrian platform, watertight and capable of being used in very high water levels. Finally inside the concrete bunker is placed a container with reinforced regions and adapted to operate with all the different types of waste collection system.

Only 4 components, simple and durable that will make all the difference in reducing the cost of your waste collection system and making it more efficient.

IntelligentSystems

System:.Platform and container fixed,collection by crane

Top loading collection (bottom open):.Double hook.Mushroom.Single hook with palpeur system

Capacity:Up to 5m3

COMPACT

System:.Electric opening (24V)

Side loading collection(closed bottom):. Lifting and loading system

Capacity:Up to 3m3

SIDE LOADINGThe access control module SOTKIS is a solution to apply the implementation of the waste variable rate system based in Pay-As-You-Throw (PAYT).

The fill level management and route planning SOTKIS is a system that uses an ultrasonic sensor and a web portal to provide information on the state of filling in each container.

ACCESS

LEVEL

.Accesscontrol(RFID).Sensor

.Cloud

System:.Platform and container fixed,collection by crane

Top loading collection (bottom open):.Double hook.Mushroom.Single hook with palpeur system

Capacity:Up to 5m3

COMPACT METALLIC

System:.Mechanical opening

Rear loading collection:(closed bottom):.Single hook with rear loading

Capacity:3m3

Top loading collection(bottom open):.Double hook.Kinshofer mushroomor double hook.Single hook withpalpeur system

Capacity:Up to 5m3

STANDARD

Page 7: General Catalogue SOTKON ENG v1 WEB

IntelligentSystems

Our Supplements

SOTKIS is an integrated management system that provides information about the various processes involved in waste collection so as to maximize the efficiency of allocated resources and increase the profitability of service. Using the SOTKIS system, each entity may have information about the filling level of containers, plan the most efficient route, know frequencies of deposition and introduce systems Pay-As-You-Throw (PAYT).

With Sotkon systems you can add an extra level of safety, confort in the collection. All Sotkon underground systems may include a safety platform that prevents accidental fall. The safety platform is a device that closes the entire opening of the bunker when the container is removed. For a single operator collection Sotkon can provide a crane automatic hook mechanism allowing an easier and remote controlled handling of the container. An automatic lid option is possible with 24V electric driven cylinder that can be powered by the waste collection truck or from the electrical net work if available.

IntakeColumn

Our Containers

Characterized by their simplicity and functionality, Sotkon intake columns present an attractive design for street furniture. Our products are designed to ergonomically provide ease of use, safety and hygiene. The intake columns are produced in stainless steel to preserve its appearance and to endure extremely aggressive environments. It is possible to provide models on request for special projects. The opening can be modified for specific types of waste.

Containers are designed to have an exceptional mechanical strength, having no metallic element in contact with the waste. The deposit and the lower lids of the container are made of polyethylene by rotational molding and the metal hardware it is hot dip galvanized. A small crane placed on the roof of the waste collection vehicle is used to lift the 3m3 closed bottom container up to the rear bin lifter where it is discharged. 3m3 and 5m3 open bottom containers are collected and discharges by top loading waste collection trucks equipped with a crane. The side loaging container collection process is fully automated and controlled from inside the side loading cabin truck through a wifi system.

UndergroundComponents

Integrated solutions for waste collection and management.Modularity between systems.

Concept360º

Page 8: General Catalogue SOTKON ENG v1 WEB

SotkonCertification

All the components are tested with supervision from TUV according to the standards EN13071-1 and EN13071-2 and European normative machine 2006/42/CE

Worldwide patented system

Page 9: General Catalogue SOTKON ENG v1 WEB

Simple andefficient.

www.sotkon.com