GALMON PLAIN FRAME TOWERMax. Safe Working Load (Tower)750kg - 1,650 lbs

Max. Safe Working Load (Platform)250kg - 550 lbs

GALMON LADDER FRAME TOWER

Lengths2.0m (6’)2.5m (8’)3.0m (10’)

Double Width1.35m (4’4”)

Single Width0.715m (2’4”)

Lengths2.0m (6’)2.5m (8’)3.0m (10’)

Double Width1.35m (4’4”)

Single Width0.715m (2’4”)

Base Double Width3.9m

Base Single Width3.6m

Base

2.0m

= 4

.5m

Bas

e2.

5m =

5.0

m B

ase

3.0m

= 5

.5m

Bas

e

Single Width665mmDouble Width1275mm

5 Ru

ng F

ram

e2.

320m

(7’7

”)4

Rung

Fra

me

1.85

6m (6

’1”)

3 Ru

ng F

ram

e1.

392m

(4’7

”)

FEATURES

• 6ins(150mm)and8ins(200mm)castors• 4ins(100mm)and6ins(150mm)self-aligningbaseplates

• Rolledsquarethreadforincreasedstrengthanddurability

• Fullnutensuresuniformloadingdowntheleg• Legheldinframebycarbonspringsteelretainingspring

• Toughpolyurethanecastorsdonotmarkfloorsandareoilandchemicalresistant

Castors / Adjustable Legs / Baseplates

Plain Frame

Ladder Frame

70º Clip-On Ladder

Self Locking Braces

Platform Hook / Wind Lock Clip

• Framesaredesignedtobeusedasuppers,lowersandguardrailswithoutmodification

• Seamweldedtubeof1.64mmthickness,provideshighstrength,closetolerancecontrol

• Castaluminiumsplinedspigotdesignedforsmoothoperationand“jam-free”fit

• Weldedconstructionforlonglifeandeasyrepair

• TheLadderFrameconstructioncombinesincreasedstrengthanddurabilitywiththesimplicityofaLadder

• TheLadderpositionedwithintheframeprovidesfoolproof,safe,speedyaccesstotheworkingplatform,andincorporatesribbedtubeforimprovedgripanduserconfidence

• ConstructedaccordingtoEN131(European/BritishStandardforLadderDesign,ConstructionandTesting)

• Laddersaremadeofruggedsectionsandsecuredtoframebytwolockingsupportarms

• 5,7and9-stepladderavailable

• Selflockingbracehookswithergonomicallydesignedreleaselatch

• Castingsaremanufacturedfromhighstrengthheattreatedaluminiumalloy

• Seamweldedforreliabilityandrepairability

• Extrawideextrudedhookforstrengthandsecurity

• Boltedconstructionforeaseofreplacement

• Diamondpattern,non-slipphenolfilmplywood

• “Windlock”cliptopreventtippinginwindyconditions,butallowsplatformmovementtoresistoverturning

Corner Strut On Frames

Colour Coded Diagonal and Horizontal beams

Trapdoor PlatformTool Tray

Rubber Swivelling BaseOn Stabilizers

Solid Cast Splined SpigotsOn Frames / Couplers

• Ribbedtubeonhorizontalrungsfornon-slipuse

• Cornerstrutsforadditionalrigidity,preventslozenging

• Selfclosingtoprevenaccidents

• Aluminiumhingesforlonglifeandeasyreplacement

• Trapdoorlatchtolocktrapdoorsafelyinplacewhenclosedorintransit

• Largeopeningforeasyaccess

• LightToolTrayattachmenton1.35mwidthofGalmonAluminiumTower

• Forsmall,lighttoolsupto18kg(39lbs.)evenlydistributed

Size: 1.325m(L)x0.195m(W)x0.95m(Depth) 52”(L)x7.68”(W)x37.4”(Depth)

Weight: 4.0kg(8.8lbs.)

• Fullrangeofstandardandjumbostabilizers(withorwithouttelescopicadjustment)

• Allwithrubberswivellingbasefootgivingfirm,securecontactwithground

• Solidcastsplinedspigot,profileenableseasyfitand“jam-free”operation

• 2ins(50mm)dropforged,zinccouplersfornon-standardapplications

• Allbracesarecolourcodedforeasyidentification

Diagonals: White 2.0m length: Red

Horizontals: Black 2.5m length: Yellow

3.0m length: Blue

GALMON TOWER COMPONENTS

5 Rung D/W FrameRD5 10.332440mm 0/All

4 Rung S/W FrameRS4 6.811976mm 0/All

3 Rung D/WLadder FrameFDL3 8.811487mm 0/All

3 Rung S/W FrameRS3 5.461512mm 0/All

5 Rung S/WLadder FrameFSL5 11.382440mm 0/All

4 Rung S/WLadder FrameFSL4 9.361976mm 0/All

850mm 0/All

665mm CTR

3 Rung S/WLadder FrameFSL3 7.23 1512mm 0/All

5 Rung D/WLadder FrameFDL5 13.732415mm 0/All

4 Rung D/WLadder FrameFDL4 11.391951mm 0/All

4 Rung D/W FrameRD4 8.561976mm 0/All

3 Rung D/W FrameRD3 6.771512mm 0/All

5 Rung S/W FrameRS5 8.052440mm 0/All

PP3 20.29b: 2900mm Hook CtrsPP2 16.88b: 2400mm Hook CtrsPP1 13.22b: 1900mm Hook Ctrs

Toeboard Assembly Double WidthTD3 16.0TD2 14.0TD1 12.0

Toeboard Assembly Single WidthTS3 13.5TS2 11.5TS1 9.5

TP3 21.83b: 2900mm Hook CtrsTP2 17.38b: 2400mm Hook CtrsTP1 13.48b: 1900mm Hook Ctrs

DB1 2.06 2015mm Ctr

HB1 1.93 1900mm Ctr

Castor / BaseplatesCT6 3.65150mm Dia WHEELCT8 4.34200mm Dia WHEELBPS 1.0SWIVEL BASE PLATE100mm x 100mm150mm x 150mm

ASS 2.0900mm

6 Rung Walk Through WT6 13.812904mm

5 Rung Portal FramePF5 8.02440mm

GP3 12.03b: 2900mm CtrGP2 10.93b: 2400mm CtrGP1 9.83b: 1900mm Ctr

400mm

Telescopic StabilizersST3 4.0a: 2475mm + 1050mmb: 2050mm + 2800mmST4 8.0c: 5000mm + 500mmd: 2060mm + 315mm

StabilizersST1 4.02a: 2475mmb: 2050mmST2 7.5c: 5000mmd: 2760mm

OPTIONAL ACCESSORY

Toeboard170mm

20mm

Toeboard170mm

20mm

Component name Weight (kg)

1275mm

665mm

464mm

232mm

Tube50.8mm1.6mm

a: 610mm

a: 610mm

b

b

Plain Platform

Trapdoor Platform

D/W Guar Rail FrameGRD 3.87

S/W Guar Rail FrameGRS 3.09

1275mm CTR

850mm 0/All

Diagonal Braces

Horizontal Braces

DB3 2.65 2945mm Ctr

DB2 2.35 2479mm Ctr

HB3 2.55 2900mm Ctr

HB2 2.24 2400mm Ctr

a

a

b

b

d

d

c

c

2.2m

1.86m

4.68m

2.15

8m

817mm

4.37m

Adjustable Leg Assembly

ALS 1.5650mm

290mm600mm

BB3 8.63

BB2 7.39

BPS 6.54

3125mm

2400mm

1900mm

Bridge Beams

464mm

70˚ Clip-on Ladder

LA9

7.0

6 22

50m

m

LA7

6.0

5 24

00m

m

LA5

5.98 11

50m

m

Goal Post Frame

a: 1850mm Ctr

FOOTPRINT OF GALMON ALUMINIUM SCAFFOLD TOWER

Julia.Yin

Stamp

These new units are another

solution for working at low level

Stepfold Podium 1

Providing platform levels of 1m &

1.2m (Working Heights, 3m & 3.2m)

Stepfold Podium 2

Providing platform levels of 1.2m &

1.45m (Working Heights, 3.2m &

3.45m)

Using a specially designed telescopic

guardrail frame, the user is able to

access the step platforms to gain

easy access to and from the working

platform. Stabilizers

are provided for extra stability.

Stepfold Podium 1 will fit through

standard doorways. This unit has a

folding mechanism that allows it to

fold flat, great for transportation and

storage.

Anti Surf Option...

This unit is available as a mobile

unit complete with 4 Castors, or with

the option of 2 plates as shown to

prevent “surfing”

Stabilizers Included with

every unit

Podium 1

STEP FOLD PODIUMS 1 & 2

Manufactured To a TUV Certified ISO 9001:2008 Quality Control System

Fully Approved & Certified to the PAS250 Standard for LLWP (Low Level Work Platforms)

Folds Flat

Step Fold

Podiums

PAS250

CERTIFICATED

Stepfold Podium 1 Stepfold Podium 2

Platform Height 1m & 1.2m 1.2m & 1.45m

Safe Working Load 150Kg 150Kg

Dimensions 0.6m x 0.65m 0.6m x 0.65m

The Step Fold Podiums

Assembly Instructions Ensure all parts are present and are not damaged before

assembling

Kit List – Podium 1 / 1m & 1.2m 4 x K548 - 5” Castors / SFBP - Base Plates

1 x SFP1 – 1m Podium Base Unit

2 x Stabilizers (SFST/L - Left & SFST/R -Right)

2 x SFGB – Guardrail Horizontal Braces `

2 x SFHB - Ribbed Brace

2 x SFSP - Step Platforms

1 x SFPP - Main Platform

Kit List – Podium 2 / 1.2m & 1.45m 4 x K548 - 5” Castors / SFBP - Base Plates

1 x SFP2 -1.2m Podium Base Unit

2 x Stabilizers (SFST/L - Left & SFST/R -Right)

2 x SFGB – Guardrail Horizontal Braces

3 x SFHB - Ribbed Brace

2 x SFSP - Step Platforms

1 x SFPP - Main Platform

Step by step guide

Always work on the podium with the knuckled gate facing the work area.

When leaving the podium, always descend, facing the knuckled gate.

1. Open the unit on a

firm and level base

lock the folding gate

section.

3. Fit the small

platforms on rung 1 &

2 to form the steps up

to the platform.

5. Fit a ribbed brace on

the rung below the

platform.

6. Fit stabilizers, left

& right.

7. Ascend to the

platform using the step

platforms and ribbed

brace.

8. Once the platform is

accessed, close the gate

behind you; ensure that

the clips are engaged.

9. To extend the unit.

Whilst standing on the

platform, extend the

top frames & Fit 2

horizontal braces.

10. Fit 2 guardrail

braces front and

back by swinging

them into place

11. When descending

from the platform, use

the step platforms

and face the knuckle

frame.

12. Fit the non slip ribbed

brace to the 2nd rung

above the step platform.

(Hooks facing outwards)

The Stepfold Podium 1

would include 1 of these

braces in this position

13. Access the

platform using the

step platforms and

non slip ribbed rung.

14. Once the platform

is accessed, close the

gate & swing the

horizontal brace back

onto its previous

position and begin

work.

Please Note: Stepfold Podium 1 is assembled in the same way as

Stepfold Podium 2, with just 1 less horizontal brace.

Podium 2

SWL 150 Kgs

2. Fit a ribbed brace

above the lowest

collar as shown.

4. Fit the working

platform on the 4th

rung.

Podium 1

STEP FOLD PODIUMS 1 & 2 Manufactured To a TUV Certified ISO 9001:2008 Quality Control System

Fully Approved & Certified to the PAS250 Standard for LLWP (Low Level Work Platforms)

Providing a platform level of 2m

(Working Height of 3m)

Ideal low level access for internal

and external use.

The inclined ladder allows a

gradual ascend to the working

platform.

This unit has a folding mechanism,

great for transportation and

storage.

Includes an extendable guardrail

gated frame to minimize the

amount of components and to clip

back into position for storage

purposes.

Optional Extras

Include:

Anti – Surf Base Plates

Toeboard Assembly

External Tool Tray

Kynol Decked Platform

Step Fold Podium 3

Stabilizers Included

with every unit

STEP FOLD PODIUM 3 Manufactured To a TUV Certified ISO 9001:2008 Quality Control System

Folds Flat

Easy

Access

STEP FOLD PODIUM 3 The Step Fold Podium 3

Assembly Instructions Ensure all parts are present and are not damaged before

assembling

Kit List – Podium 3 4 x K548 - 5” Castors

1 x SFP3 – Stepfold 3 Podium Base Unit

1 x SFSP/3 - Step Platform

1 x SFPP/3 - Main Platform

1 x SFCL – Stepfold 3 Clip in Ladder

2 x SFDB – Stepfold 3 Diagonal Brace

2 x SFST/3 – Stepfold 3 Stabilizers

Stepfold Podium 3

Platform Height 2m

Safe Working Load 150Kg

Dimensions 0.9m x 1.2m

Unit Weight C/W Stabilizers 56Kg

Always work on the podium with the knuckled gate facing the work area.

When leaving the podium, always descend, facing the knuckled gate.

1. Open the unit on a

firm and level base

lock the folding gate

section.

3. Ensure that the

castors are in the braked

position

5. Repeat this process

on the front of the unit

in the opposite direction

as shown.

9. Fit stabilizers 7. Fit the step platform

at the base of the unit

as shown.

8. Fit the ladder 1 rung below

the working platform.

Pivot the rung until the hook

is facing downwards and clip

into place.

10. Access the platform

using the step platforms

and ladder, keeping

contact with the unit at

all times.

11. Once the platform is

accessed, extend the

gate to its full length and

close.

STABILIZERS MUST BE USED AT ALL TIMES

THIS UNIT IS SUPPLIED WITH 4 CASTORS AS STANDARD

Manufactured To a TUV Certified ISO 9001:2008 Quality Control System

2. Fit the main platform on

the 8th rung as shown

4. Fit a diagonal brace

from the 1st to 3

rd rung

of the podium at the

back of the unit.

PLEASE NOTE:

To remove the ladder,

release the bottom catches

and turn the hooks

towards you.

This will enable the top to

be removed.

Step by step guide

12. The gate can be

extended simply by

releasing the button.

Once the gate is in the

designated place the

button will automatically

lock into place.

Gain speedy, easy access with the MINIFOLD UNIT

1 Man Mobile Aluminium Tower System

Euro one, quick assembly, one person aluminum mobile tower Easy to erect and dismantle by one person with the base unit forming a trolley for fast storage and transportation.

Aluminum Toe board set

4 Working heights up to 6.10m

Compact 1.2m x 0.7m base size

Fits through standard doorways

250mm rung pitch

One size frame for an easier build

4 Platform Heights

Tower condenses down to an easily transportable trolley.

SPECIFICATION

PLATFORM HEIGHTS 1.1m, 2.1m, 3.1m, 4.1m TOWER HEIGHTS 2.3m, 3.3m, 4.3m, 5.3m WORKING HEIGHTS 3.1m, 4.1m, 5.1m, 6.1m PLATFORM LENGTH 1.3m PLATFORM WIDTH 0.70m TOWER WEIGHT 130 Kgs SAFE WORKING LOAD 150 Kgs

EURO ONE KIT LIST 1.1m 2.1m 3.1m 4.1m

CASTOR 4 4 4 4

ADJUSTABLE LEG 4 4 4 4

4 RUNG FRAME 4 6 8 10

GUARDRAIL FRAME 3 4 6 7

TRAPDOOR PLATFORM 1 1 2 2

STABILIZER 4 4 4 4

TOEBOARD 1 1 1 1

ASSEMBLY BRACKET 0 1 2 2

Manufactured To a TUV Certified ISO 9001:2008 Quality Control System